summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2010-07-20kbuild: Make the setlocalversion script POSIX-compliantMichał Górny1-3/+4
The 'source' builtin is a bash alias to the '.' (dot) builtin. While the former is supported only by bash, the latter is specified in POSIX and works fine with all POSIX-compliant shells I am aware of. The '$_' special parameter is specific to bash. It is partially supported in dash too but it always evaluates to the current script path (which causes the script to enter a loop recursively re-executing itself). This is why I have replaced the two occurences of '$_' with the explicit parameter. The 'local' builtin is another example of bash-specific code. Although it is supported by all POSIX-compliant shells I am aware of, it is not part of POSIX specification and thus the code should not rely on it assigning a specific value to the local variable. Moreover, the 'posh' shell has a limited version of 'local' builtin not supporting direct variable assignments. Thus, I have broken one of the 'local' declarations down into a (non-POSIX) 'local' declaration and a plain (POSIX-compliant) variable assignment. Signed-off-by: Michał Górny <gentoo@mgorny.alt.pl> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-12Linux 2.6.35-rc5v2.6.35-rc5Linus Torvalds1-1/+1
2010-07-12Merge branch 'arm/defconfig/reduced-v2.6.35-rc1' of ↵Linus Torvalds177-194157/+652
git://git.pengutronix.de/git/ukl/linux-2.6 * 'arm/defconfig/reduced-v2.6.35-rc1' of git://git.pengutronix.de/git/ukl/linux-2.6: ARM: reduce defconfigs This is a big change, but results in no loss of information, despite us losing almost 200k lines: 177 files changed, 652 insertions(+), 194157 deletions(-) and Grant Likely thinks powerpc can also use the same reduction technique. The python script that did the reduction looks like this: #! /usr/bin/env python # vim: set fileencoding=utf-8 : # Copyright (C) 2010 by Uwe Kleine-König <u.kleine-koenig@pengutronix.de> import re import subprocess import os import sys # This prevents including a timestamp in the .config which makes comparing a # bit easier. os.environ['KCONFIG_NOTIMESTAMP'] = 'Yes, please' # XXX: get these using getopt kernel_tree = '' # os.path.join(os.environ['HOME'], 'gsrc', 'linux-2.6') arch = 'arm' target = sys.argv[1] defconfig_src = os.path.join(kernel_tree, 'arch/%s/configs/%s' % (arch, target)) subprocess.check_call(['make', '-s', 'ARCH=%s' % arch, target]) origconfig = list(open('.config')) config = list(origconfig) config_size = os.stat('.config').st_size i = 0 while i < len(config): print 'test for %r' % config[i] defconfig = open(defconfig_src, 'w') defconfig.writelines(config[:i]) defconfig.writelines(config[i + 1:]) defconfig.close() subprocess.check_call(['make', '-s', 'ARCH=%s' % arch, target]) if os.stat('.config').st_size == config_size and list(open('.config')) == origconfig: del config[i] else: i += 1 defconfig = open(defconfig_src, 'w') defconfig.writelines(config) defconfig.close() which is pretty self-explanatory. Acked-by: Nicolas Pitre <nico@fluxnic.net> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-12Merge branch 'fix/hda' of ↵Linus Torvalds2-1/+31
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Restore cleared pin controls on resume
2010-07-12Merge branch 'v4l_for_2.6.35' of ↵Linus Torvalds18-163/+169
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB: uvc: Fix multiple symbols definitions with UVC gadget and host drivers V4L/DVB: v4l: mem2mem_testdev: fix g_fmt NULL pointer dereference V4L/DVB: uvcvideo: Power line frequency control doesn't support GET_MIN/MAX/RES V4L/DVB: ivtv: Add delay to ensure the decoder always restarts with a blank screen V4L/DVB: Documentation: Add the Philips FQ1236 MK5 to video4linux/CARDLIST.tuner V4L/DVB: tveeprom: Add an entry for tuner code 168: a TCL M30WTP-4N-E tuner V4L/DVB: tuner: Add a definition for the Philips FQ1236 MK5 NTSC tuner V4L/DVB: OMAP_VOUT: fix: Module params were not working through bootargs V4L/DVB: OMAP_VOUT: fix: Replaced dma-sg with dma-contig V4L/DVB: OMAP_VOUT:Build FIX: Rebased against latest DSS2 changes
2010-07-12Merge branch 'for-linus' of ↵Linus Torvalds7-5/+91
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Send Report ID when numbered reports are sent over the control endpoint. HID: Enable HID_QUIRK_MULTI_INPUT for Retro Adaptor HID: add support for CH Eclipse yoke HID: eliminate a double lock in debug code HID: ntrig: add support for new firwmare versions HID: check for HID_QUIRK_IGNORE during probing HID: roccat: fix modules interdependencies
2010-07-12MAINTAINERS: fix EDAC-I7CORE file patternsJoe Perches1-1/+3
File patterns are one per line. Fixed include file location. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-11HID: Send Report ID when numbered reports are sent over the control endpoint.Alan Ott1-3/+10
The Report ID wasn't sent as part of the payload for reports which were sent over the control endpoint. This is required by section 8.1 of the HID spec. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-11V4L/DVB: uvc: Fix multiple symbols definitions with UVC gadget and host driversLaurent Pinchart7-110/+89
The UVC gadget driver borrowed code from the UVC host driver without changing the symbol names. This results in a namespace clash with multiple definitions of several symbols when compiling both drivers in the kernel. Make all generic UVC functions and variables static in the UVC gadget driver, as the symbols are not referenced outside of the gadget driver. Rename the uvc_trace_param global variable to uvc_gadget_trace_param. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-11Merge branch 'hwmon-for-linus' of ↵Linus Torvalds4-12/+60
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Fix autoloading of fschmd on recent Fujitsu machines hwmon: (coretemp) Properly label the sensors hwmon: (coretemp) Skip duplicate CPU entries hwmon: (it87) Fix in7 on IT8720F hwmon: (k8temp) Fix temperature reporting for ASB1 processor revisions
2010-07-11Merge branch 'i2c-for-linus' of ↵Linus Torvalds2-6/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c/mips: Fix error return codes from Sibyte i2c bus driver i2c: Fix probability check
2010-07-11HID: Enable HID_QUIRK_MULTI_INPUT for Retro AdaptorPeter Edwards2-0/+3
Patch for linux-2.6.35-rc4 mainline kernel to enable Paul Qureshi's Retro Adapter [http://keio.dk/retroadapter.html], an open source USB device which allows controllers and joysticks from classic computers and consoles to work on modern PCs, to appear as two separate devices under Linux. Signed-off-by: Peter Edwards <samwise@bagshot-row.org> Acked-by: Paul Qureshi <retro@world3.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-11HID: add support for CH Eclipse yokeJonathan Rockway2-0/+2
This USB flight yoke needs the NOGET quirk, like most of CH's other products. This patch adds that. Signed-off-by: Jonathan Rockway <jon@jrock.us> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-10i2c/mips: Fix error return codes from Sibyte i2c bus driverGuenter Roeck1-2/+2
Sibyte i2c bus driver returns non-descriptive error values. Update to return error values as defined in Documentation/i2c/fault-codes. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-07-10i2c: Fix probability checkJean Delvare1-4/+3
The new unified probing function differs from the original code, and the preliminary test whether probing is possible must be updated accordingly. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-07-09hwmon: Fix autoloading of fschmd on recent Fujitsu machinesJean Delvare1-6/+2
Fujitsu slightly changed the DMI strings in their recent machines, (for example the D2778) and this breaks the automatic loading of the needed fschmd driver. Being more tolerant on string comparison fixes the issue. This closes bug #15634: https://bugzilla.kernel.org/show_bug.cgi?id=15634 Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Sergey Spiridonov <sena@hurd.homeunix.org> Cc: Hans de Goede <hdegoede@redhat.com>
2010-07-09hwmon: (coretemp) Properly label the sensorsJean Delvare1-1/+5
Don't assume that CPU entry number and core ID always match. It worked in the simple cases (single CPU, no HT) but fails on multi-CPU systems. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Huaxu Wan <huaxu.wan@intel.com> Cc: stable@kernel.org
2010-07-09hwmon: (coretemp) Skip duplicate CPU entriesJean Delvare1-1/+25
On hyper-threaded CPUs, each core appears twice in the CPU list. Skip the second entry to avoid duplicate sensors. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Huaxu Wan <huaxu.wan@intel.com> Cc: stable@kernel.org
2010-07-09hwmon: (it87) Fix in7 on IT8720FJean Delvare1-0/+22
The IT8720F has no VIN7 pin, so VCCH should always be routed internally to VIN7 with an internal divider. Curiously, there still is a configuration bit to control this, which means it can be set incorrectly. And even more curiously, many boards out there are improperly configured, even though the IT8720F datasheet claims that the internal routing of VCCH to VIN7 is the default setting. So we force the internal routing in this case. It turns out that all boards with the wrong setting are from Gigabyte, so I suspect a BIOS bug. But it's easy enough to workaround in the driver, so let's do it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jean-Marc Spaggiari <jean-marc@spaggiari.org> Cc: stable@kernel.org
2010-07-09hwmon: (k8temp) Fix temperature reporting for ASB1 processor revisionsAndreas Herrmann1-4/+6
Reported temperature for ASB1 CPUs is too high. Add ASB1 CPU revisions (these are also non-desktop variants) to the list of CPUs for which the temperature fixup is not required. Example: (from LENOVO ThinkPad Edge 13, 01972NG, system was idle) Current kernel reports $ sensors k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +74.0 C Core0 Temp: +70.0 C Core1 Temp: +69.0 C Core1 Temp: +70.0 C With this patch I have $ sensors k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +54.0 C Core0 Temp: +51.0 C Core1 Temp: +48.0 C Core1 Temp: +49.0 C Cc: stable@kernel.org [.32.x .33.x, .34.x] Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-07-09ALSA: hda - Restore cleared pin controls on resumeTakashi Iwai2-1/+31
Many codecs now clear the pin controls at suspend via snd_hda_shutup_pins() for reducing the click noise at power-off. But this leaves some pins uninitialized, and they'll be never recovered after resume. This patch adds the proper recovery of cleared pin controls on resume. Also it adds a check of bus->shutdown so that pins won't be cleared at module unloading. Reference: Kernel bug 16339 http://bugzilla.kernel.org/show_bug.cgi?id=16339 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-08IB/qib: Use request_firmware() to load SD7220 firmwareBen Hutchings7-1100/+600
Extract the microcode for the QLogic QLE7220 series IB HCA and use the kernel microcode request facility to load the microcode. This supports Debian Linux's requirements to separate microcode which doesn't have open source code available from the device driver. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-08V4L/DVB: v4l: mem2mem_testdev: fix g_fmt NULL pointer dereferencePawel Osciak1-0/+3
Calling g_fmt before s_fmt resulted in a NULL pointer dereference as no default formats were being selected on probe. Reported-by: Németh Márton <nm127@freemail.hu> Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: uvcvideo: Power line frequency control doesn't support GET_MIN/MAX/RESLaurent Pinchart1-2/+2
Issuing a GET_MIN request on the power line frequency control times out on at least the Apple iSight. As the UVC specification doesn't list GET_MIN/MAX/RES as supported on that control, remove them from the uvc_ctrls array. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: ivtv: Add delay to ensure the decoder always restarts with a blank ↵Ian Armstrong1-0/+3
screen Add a short delay when stopping the decoder, allowing it to settle and preventing some unexpected interaction with other firmware commands. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Tested-by: Martin Dauskardt <martin.dauskardt@gmx.de> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: Documentation: Add the Philips FQ1236 MK5 to video4linux/CARDLIST.tunerAndy Walls1-0/+1
Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: tveeprom: Add an entry for tuner code 168: a TCL M30WTP-4N-E tunerAndy Walls1-0/+15
Hauppauge EEPROM tuner code 168 has recently shown up on HVR-1600 TV capture cards supported by the cx18 driver. This change allows analog tuner type autodetection to succeed for these cards. Information for decoding tuner code 168 was provided by Hauppauge. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: tuner: Add a definition for the Philips FQ1236 MK5 NTSC tunerAndy Walls3-0/+18
Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: OMAP_VOUT: fix: Module params were not working through bootargsVaibhav Hiremath1-2/+2
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: OMAP_VOUT: fix: Replaced dma-sg with dma-contigVaibhav Hiremath2-32/+16
Actually OMAP doesn't support scatter-gather DMA for Display subsystem but due to legacy coding it has been overlooked till now. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: OMAP_VOUT:Build FIX: Rebased against latest DSS2 changesVaibhav Hiremath2-17/+20
Changes - - Kconfig option dependancy changed to ARCH_OMAP2/3 from ARCH_OMAP24XX/34XX - There are some moments of function from omap_dss_device to omap_dss_driver. Incorporated changes for the same. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08Merge branch 'for-linus' of ↵Linus Torvalds15-66/+148
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Fix world-writable child interface control sysfs attributes IB/qib: Clean up properly if qib_init() fails IB/qib: Completion queue callback needs to be single threaded IB/qib: Update 7322 serdes tables IB/qib: Clear 6120 hardware error register IB/qib: Clear eager buffer memory for each new process IB/qib: Mask hardware error during link reset IB/qib: Don't mark VL15 bufs as WC to avoid a rare 7322 chip problem RDMA/cxgb4: Derive smac_idx from port viid RDMA/cxgb4: Avoid false GTS CIDX_INC overflows RDMA/cxgb4: Don't call abort_connection() for active connect failures RDMA/cxgb4: Use the DMA state API instead of the pci equivalents
2010-07-08Merge branches 'cxgb4', 'ipoib' and 'qib' into for-nextRoland Dreier9-41/+106
2010-07-08Merge branch 'for-linus' of ↵Linus Torvalds2-2/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Enable beep on Realtek codecs with PCI SSID override ALSA: usb-audio - Add volume resolution quirk for some Logitech webcams ALSA: hda - Add Macbook 5,2 quirk ALSA: hda - Fix uninitialized variable
2010-07-08Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds8-254/+122
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: writeback: simplify the write back thread queue writeback: split writeback_inodes_wb writeback: remove writeback_inodes_wbc fs-writeback: fix kernel-doc warnings splice: check f_mode for seekable file splice: direct_splice_actor() should not use pos in sd
2010-07-08Merge branch 'merge' of ↵Linus Torvalds13-37/+184
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix userspace build of ptrace.h powerpc: Fix default_machine_crash_shutdown #ifdef botch powerpc: Fix logic error in fixup_irqs powerpc/iseries: Fix possible null pointer dereference in iSeries_pcibios_fixup_resources powerpc: Linux cannot run with 0 cores powerpc: Fix feature-fixup tests for gcc 4.5 powerpc: Disable SPARSE_IRQ by default powerpc: Fix compile errors in prom_init_check for gcc 4.5 powerpc: Fix module building for gcc 4.5 and 64 bit powerpc/perf_event: Fix for power_pmu_disable()
2010-07-08Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds4-56/+67
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: Fix on wrong function name for S5PV210 sdhci0 ARM: S5P6442: Fix PLL setting announce message. ARM: SAMSUNG: Fix build without SDHCI controllers for S3C64XX ARM: S5PV210: Correct clock register properties ARM: S5P: Bug fix on external interrupt for S5P SoCs
2010-07-08Merge branch 'fix/misc' into for-linusTakashi Iwai1-0/+13
2010-07-08Merge branch 'fix/hda' into for-linusTakashi Iwai1-2/+5
2010-07-08powerpc: Fix userspace build of ptrace.hSam Ravnborg1-18/+14
Build of ptrace.h failed for assembly because it pulls in stdint.h. Use exportable types (__u32, __u64) to avoid the dependency on stdint.h. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Andrey Volkov <avolkov@varma-el.com> Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-08powerpc: Fix default_machine_crash_shutdown #ifdef botchPaul E. McKenney1-1/+1
crash_kexec_wait_realmode() is defined only if CONFIG_PPC_STD_MMU_64 and CONFIG_SMP, but is called if CONFIG_PPC_STD_MMU_64 even if !CONFIG_SMP. Fix the conditional compilation around the invocation. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-08powerpc: Fix logic error in fixup_irqsJohannes Berg1-1/+4
When SPARSE_IRQ is set, irq_to_desc() can return NULL. While the code here has a check for NULL, it's not really correct. Fix it by separating the check for it. This fixes CPU hot unplug for me. Reported-by: Alastair Bridgewater <alastair.bridgewater@gmail.com> Cc: stable@kernel.org [2.6.32+] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-08powerpc/iseries: Fix possible null pointer dereference in ↵Denis Kirjanov1-1/+5
iSeries_pcibios_fixup_resources I don't know if this is a right fix for the problem since of_get_property can return NULL. Since iseries_device_information is used only for informational purpose, we can skip this function without valid HvSubBusNumber number. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-08powerpc: Linux cannot run with 0 coresAnton Blanchard1-1/+1
If we configure with CONFIG_SMP=n or set NR_CPUS less than the number of SMT threads we will set the max cores property to 0 in the ibm,client-architecture-support structure. On new versions of firmware that understand this property it obliges and terminates our partition. Use DIV_ROUND_UP so we handle not only the CONFIG_SMP=n case but also the case where NR_CPUS isn't a multiple of the number of SMT threads. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-08powerpc: Fix feature-fixup tests for gcc 4.5Stephen Rothwell1-8/+9
The feature-fixup test declare some extern void variables and then take their addresses. Fix this by declaring them as extern u8 instead. Fixes these warnings (treated as errors): CC arch/powerpc/lib/feature-fixups.o cc1: warnings being treated as errors arch/powerpc/lib/feature-fixups.c: In function 'test_cpu_macros': arch/powerpc/lib/feature-fixups.c:293:23: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:294:9: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:297:2: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:297:2: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c: In function 'test_fw_macros': arch/powerpc/lib/feature-fixups.c:306:23: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:307:9: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:310:2: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:310:2: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c: In function 'test_lwsync_macros': arch/powerpc/lib/feature-fixups.c:321:23: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:322:9: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:326:3: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:326:3: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:329:3: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:329:3: error: taking address of expression of type 'void' Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-08powerpc: Disable SPARSE_IRQ by defaultYang Li1-2/+2
The SPARSE_IRQ considerably adds overhead to critical path of IRQ handling. However it doesn't benefit much in space for most systems with limited IRQ_NR. Should be disabled unless really necessary. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-08powerpc: Fix compile errors in prom_init_check for gcc 4.5Stephen Rothwell1-0/+6
Just whitelist these extra compiler generated symbols. Fixes these errors: Error: External symbol '_restgpr0_14' referenced from prom_init.c Error: External symbol '_restgpr0_20' referenced from prom_init.c Error: External symbol '_restgpr0_22' referenced from prom_init.c Error: External symbol '_restgpr0_24' referenced from prom_init.c Error: External symbol '_restgpr0_25' referenced from prom_init.c Error: External symbol '_restgpr0_26' referenced from prom_init.c Error: External symbol '_restgpr0_27' referenced from prom_init.c Error: External symbol '_restgpr0_28' referenced from prom_init.c Error: External symbol '_restgpr0_29' referenced from prom_init.c Error: External symbol '_restgpr0_31' referenced from prom_init.c Error: External symbol '_savegpr0_14' referenced from prom_init.c Error: External symbol '_savegpr0_20' referenced from prom_init.c Error: External symbol '_savegpr0_22' referenced from prom_init.c Error: External symbol '_savegpr0_24' referenced from prom_init.c Error: External symbol '_savegpr0_25' referenced from prom_init.c Error: External symbol '_savegpr0_26' referenced from prom_init.c Error: External symbol '_savegpr0_27' referenced from prom_init.c Error: External symbol '_savegpr0_28' referenced from prom_init.c Error: External symbol '_savegpr0_29' referenced from prom_init.c Error: External symbol '_savegpr0_31' referenced from prom_init.c Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-08powerpc: Fix module building for gcc 4.5 and 64 bitStephen Rothwell4-4/+138
Gcc 4.5 is now generating out of line register save and restore in the function prefix and postfix when we use -Os. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-08powerpc/perf_event: Fix for power_pmu_disable()Matt Evans1-1/+4
When power_pmu_disable() removes the given event from a particular index into cpuhw->event[], it shuffles down higher event[] entries. But, this array is paired with cpuhw->events[] and cpuhw->flags[] so should shuffle them similarly. If these arrays get out of sync, code such as power_check_constraints() will fail. This caused a bug where events were temporarily disabled and then failed to be re-enabled; subsequent code tried to write_pmc() with its (disabled) idx of 0, causing a message "oops trying to write PMC0". This triggers this bug on POWER7, running a miss-heavy test: perf record -e L1-dcache-load-misses -e L1-dcache-store-misses ./misstest Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds36-189/+332
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (35 commits) NET: SB1250: Initialize .owner vxge: show startup message with KERN_INFO ll_temac: Fix missing iounmaps bridge: Clear IPCB before possible entry into IP stack bridge br_multicast: BUG: unable to handle kernel NULL pointer dereference net: Fix definition of netif_vdbg() when VERBOSE_DEBUG is defined net/ne: fix memory leak in ne_drv_probe() xfrm: fix xfrm by MARK logic virtio_net: fix oom handling on tx virtio_net: do not reschedule rx refill forever s2io: resolve statistics issues linux/net.h: fix kernel-doc warnings net: decreasing real_num_tx_queues needs to flush qdisc sched: qdisc_reset_all_tx is calling qdisc_reset without qdisc_lock qlge: fix a eeh handler to not add a pending timer qlge: Replacing add_timer() to mod_timer() usbnet: Set parent device early for netdev_printk() net: Revert "rndis_host: Poll status channel before control channel" netfilter: ip6t_REJECT: fix a dst leak in ipv6 REJECT drivers: bluetooth: bluecard_cs.c: Fixed include error, changed to linux/io.h ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 04:58:15 +0000