summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2008-11-03bonding, net: Move last_rx update into bonding recv logicJay Vosburgh4-14/+24
The only user of the net_device->last_rx field is bonding. This patch adds a conditional update of last_rx to the bonding special logic in skb_bond_should_drop, causing last_rx to only be updated when the ARP monitor is running. This frees network device drivers from the necessity of updating last_rx, which can have cache line thrash issues. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03net: increase receive packet quantumStephen Hemminger1-7/+4
This patch gets about 1.25% back on tbench regression. My change to NAPI for multiqueue support changed the time limit on network receive processing. Under sustained loads like tbench, this can cause the receiver to reschedule prematurely. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03printk: ipv4 address digits printed in reverse orderHarvey Harrison1-2/+6
put_dec_trunc prints the digits in reverse order and is reversed inside number(). Continue using put_dec_trunc, but reverse each quad in ip4_addr_string. [Noticed by Julius Volz] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03IPVS: Remove supports_ipv6 scheduler flagJulius Volz12-51/+6
Remove the 'supports_ipv6' scheduler flag since all schedulers now support IPv6. Signed-off-by: Julius Volz <julius.volz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03IPVS: Add IPv6 support to LBLC/LBLCR schedulersJulius Volz2-61/+92
Add IPv6 support to LBLC and LBLCR schedulers. These were the last schedulers without IPv6 support, but we might want to keep the supports_ipv6 flag in the case of future schedulers without IPv6 support. Signed-off-by: Julius Volz <julius.volz@gmail.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: Update version to 3.95Matt Carlson1-2/+2
This patch updates the version to 3.95. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03broadcom: Add support for BCM50610Matt Carlson1-1/+118
This patch adds the BCM50610 to the list of phys supported by the broadcom driver. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03broadcom: Refine expansion register access routineMatt Carlson1-26/+34
This patch makes the expansion register access routines a little more formal. They will be used by the following bcm50610 support patch. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03broadcom: Add flow control supportMatt Carlson1-6/+12
This patch adds flow control support to Broadcom phys. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: 5785 enhancementsMatt Carlson2-21/+163
This patch refines support for the 5785 device. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: Refine phylib supportMatt Carlson1-12/+35
This patch refines the phylib support in the tg3 driver. The patch does the following things : * Rename tg3_mdio_config() to tg3_mdio_config_5785(). The 5785 will be the only device that will use it so the name might as well reflect that. * Fix a memory leak if mdiobus_register() fails. * Add code to deal with phy device detection failures. * Add code to correct the supported list of phy features based on the MAC <=> PHY interface. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: Allow WOL for phylib controlled Broadcom physMatt Carlson2-8/+33
This patch allows WOL to be enabled for Broadcom phys under phylib control. The only exception is the AC131, which has a completely different register set. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: Refine power management and WOL codeMatt Carlson1-17/+23
Commit 12dac0756d357325b107fe6ec24921ec38661839 ("tg3: adapt tg3 to use reworked PCI PM code") introduced the new PCI PM API to the tg3 driver. The patch was understandably conservative, so this patch elaborates on that work. The patch starts by creating a single point in tg3_set_power_state() to decide whether or not to enable WOL. The rest of the code in tg3_set_power_state() was then pivoted to use the result of this decision. The patch then makes sure the device is allowed to wakeup before reporting whether or not WOL is currently enabled. The final hunks of the patch consolidate where the WOL capability and WOL enabled flags are set to a single location. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: Move phylib report to end of tg3_init_oneMatt Carlson1-13/+17
Currently, phylib reports appear with a eth%d prefix. Move the line after register_netdev() and place it alongside the other informative messages. Update nearby informative messages accordingly. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: Do not enable APE on bcm5700Matt Carlson1-1/+4
With older versions of the NVRAM format, the driver may mistakenly determine that APE is enabled. Make sure this doesn't happen by restricting the ENABLE_APE check to devices known to have more recent NVRAM image formats. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: Reclaim TG3_FLG3_5761_5784_AX_FIXES flagMatt Carlson2-15/+7
This patch reclaims the TG3_FLG3_5761_5784_AX_FIXES flag. It only used twice in non-fast paths. This patch also consolidates some other places where specific 5784 AX chip revisions can be generalized. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: Preserve LAA when device control is releasedMatt Carlson1-37/+39
This patch moves the __tg3_set_mac_addr() function earlier in the file listing, to avoid a function prototype, and calls the function to restore the LAA after a driver unload chip reset. With this code in place, the administrator can wake the machine using the LAA. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: Preserve DASH connectivity when WOL enabledMatt Carlson2-1/+15
DASH firmware runs on the APE side of the chip, but it requires a few MAC to be programmed correctly. When WOL is enabled and management firmware is disabled, incoming packets are evaluated and discarded at the chip's rule processor. When management firmware is enabled, the hardware must be informed that there are agents further up the stack that still use the incoming frames. Normally management firmware will configure the MAC correctly on its own, but there can be cases where the setting could get clobbered by the driver. The first hunk of this patch preserves this setting. The second hunk of this patch wipes out the driver present signature of the APE memory space. By doing so, the DASH firmware can assume driver absent behavior. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: Use pci_ioremap_bar()Matt Carlson1-12/+12
This patch replaces the existing APE register mapping code with a call to pci_ioremap_bar(). The code that maps the main device register space did not undergo a similar change because the information derived from the pci_resource_start() and pci_resource_len() is still used to populate the (optional) mem_start and mem_end netdevice members. Replace hardcoded constants where appropriate. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: Add 5761S supportMatt Carlson2-0/+4
This patch adds support for the 5761S chip variants. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03pkt_sched: sch_generic: Kfree gso_skb in qdisc_reset()Jarek Poplawski1-0/+3
Since gso_skb is re-used for qdisc_peek_dequeued(), and this skb is counted in the qdisc->q.qlen, it has to be kfreed during qdisc_reset() when qlen is zeroed. With help from David S. Miller <davem@davemloft.net> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03net: clean up net/ipv4/tcp_ipv4.cJianjun Kong1-8/+8
Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03net: clean up net/ipv4/devinet.cJianjun Kong1-5/+5
Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03net: clean up net/ipv4/pararp.cJianjun Kong1-7/+7
Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03net: clean up net/ipv4/ip_fragment.c tcp_timer.c ip_input.cJianjun Kong3-5/+5
Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03net: clean up net/ipv4/ipmr.cJianjun Kong1-65/+65
Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03net: clean up net/ipv4/ip_sockglue.c tcp_output.cJianjun Kong2-20/+20
Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03net: clean up net/ipv4/igmp.cJianjun Kong1-23/+23
Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03net: clean up net/ipv4/fib_frontend.c fib_hash.c ip_gre.cJianjun Kong3-18/+18
Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03net: clean up net/ipv4/ipip.c raw.c tcp.c tcp_minisocks.c tcp_yeah.c ↵Jianjun Kong6-12/+12
xfrm4_policy.c Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03net: clean up net/ipv4/ah4.c esp4.c fib_semantics.c inet_connection_sock.c ↵Jianjun Kong6-13/+13
inetpeer.c ip_output.c Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-02sunrpc: Fix build warning due to typo in %pI4 format changes.David S. Miller1-1/+1
Noticed by Stephen Hemminger. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-02IPVS: Add IPv6 support to SH and DH schedulersJulius Volz2-18/+42
Add IPv6 support to SH and DH schedulers. I hope this simple IPv6 address hashing is good enough. The 128 bit are just XORed into 32 before hashing them like an IPv4 address. Signed-off-by: Julius Volz <julius.volz@gmail.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-02Merge branch 'davem-next' of ↵David S. Miller15-104/+219
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-11-02bonding: update docs to correctly reflect arp_ip_target behaviorAndy Gospodarek1-7/+9
This documentation patch hopes to clarify that the '+' was only needed for Fedora 7 and Red Hat Enterprise Linux 5.0 and 5.1. After that the IP addreses could be added as a comma separated list just like the module option. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-02smc91x: add __init markings to smc_drv_probe()Mike Frysinger1-1/+1
The smc_drv_probe() is the platform_driver probe function and it is only called during init. Further, it calls smc_probe() which is marked as __init already. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-02forcdeth: increase max_interrupt_workJoe Korty1-1/+1
This eliminates the following often-generated warning from my 64 bit Opteron SMP test stand: eth0: too many iterations (6) in nv_nic_irq According to the web, the problem is that the forcedeth driver has a too-low value for max_interrupt_work. Grepping the kernel I see that forcedeth has the second lowest value of all ethernet drivers (ie, 6). Most are in the 20-40 range. So this patch increases this a bit, from 6 to 15 (at 15 forcedeth becomes the driver with third-lowest max_interrupt_work value). My test stand, which used to print out the above warnings repetitively whenever it was under heavy net load, no longer does so. Signed-off-by: Joe Korty <joe.korty@ccur.com> Cc: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-02ixgbe: add device support for 82598AT (copper 10GbE) adaptersJesse Brandeburg7-0/+154
Intel is currently shipping support for adapters with a phy that does 10GBase-T (copper), which is 10 Gigabit ethernet over standard Category 6 cabling. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-02atlx: timer cleanupStephen Hemminger3-25/+10
Do some cleanup on timer usage in this driver: * Use round_jiffies to align wakeups and reduce power. * Remove atl1_watchdog which does nothing but rearm itself * Use setup_timer() function Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-02atlx: use embedded net_device_statsStephen Hemminger5-70/+44
There is now a net_device_stats structure inside net_device that should be used if possible by devices. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-02sch_netem: Replace ->requeue() method with open codeJarek Poplawski1-1/+5
After removing netem classful functionality we are sure its inner qdisc is tfifo, so we can replace qdisc->ops->requeue() method with open code. After this patch there are no more ops->requeue() users. The idea of this patch is by Patrick McHardy. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-02sch_netem: Remove classful functionalityJarek Poplawski1-87/+0
Patrick McHardy noticed that: "a lot of the functionality of netem requires the inner tfifo anyways and rate-limiting is usually done on top of netem. So I would suggest so either hard-wire the tfifo qdisc or at least make the assumption that inner qdiscs are work-conserving.", and later: "- a lot of other qdiscs still don't work as inner qdiscs of netem [...]". So, according to his suggestion, this patch removes classful options of netem. The main reason of this change is to remove ops->requeue() method, which is currently used only by netem. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-02[TCP] CUBIC v2.3Sangtae Ha1-11/+109
Signed-off-by: Sangtae Ha <sha2@ncsu.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-01af_unix: clean up net/unix/af_unix.c garbage.c sysctl_net_unix.cJianjun Kong3-44/+42
clean up net/unix/af_unix.c garbage.c sysctl_net_unix.c Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-01udp: add a missing smp_wmb() in udp_lib_get_port()Eric Dumazet1-0/+5
Corey Minyard spotted a missing memory barrier in udp_lib_get_port() We need to make sure a reader cannot read the new 'sk->sk_next' value and previous value of 'sk->sk_hash'. Or else, an item could be deleted from a chain, and inserted into another chain. If new chain was empty before the move, 'next' pointer is NULL, and lockless reader can not detect it missed following items in original chain. This patch is temporary, since we expect an upcoming patch to introduce another way of handling the problem. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-01xfrm6: handling fragmentNicolas Dichtel1-3/+6
RFC4301 Section 7.1 says: "7.1. Tunnel Mode SAs that Carry Initial and Non-Initial Fragments All implementations MUST support tunnel mode SAs that are configured to pass traffic without regard to port field (or ICMP type/code or Mobility Header type) values. If the SA will carry traffic for specified protocols, the selector set for the SA MUST specify the port fields (or ICMP type/code or Mobility Header type) as ANY. An SA defined in this fashion will carry all traffic including initial and non-initial fragments for the indicated Local/Remote addresses and specified Next Layer protocol(s)." But for IPv6, fragment is treated as a protocol. This change catches protocol transported in fragmented packet. In IPv4, there is no problem. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31mac80211: fix two kernel-doc warningsJohannes Berg2-19/+23
One parameter wasn't described and one I forgot to update when renaming it; also update TBDs in sta_info. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31ath9k: use ETH_P_PAELuis R. Rodriguez1-2/+2
It was being discussed where we would put this, but now it found a home so use its define. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31ath9k: remove useless conditionalBob Copeland1-3/+0
ath9k_hw_keyreset returns true in either branch. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31orinoco: cache downloadable firmware image in memory for use during resumeAndrey Borzenkov2-7/+26
If card is using downloadable firmware (like Agere 9.x), firmware has to be reloaded during resume. It is not possible to use request_firmware for that, because tasks are still frozen, so request_firmware will just timeout and fail. So cache firmware image in memory for later reuse in ->resume method. Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 00:40:46 +0000