summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-06-02mfd: pm8008: Add driver for QCOM PM8008 PMICGuru Das Srinagesh3-0/+275
Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that integrates all the necessary power management, housekeeping, and interface support functions into a single IC. Its key features include overtemperature protection, low-dropout linear regulators, GPIOs, and an I2C interface. Add an MFD driver to support it. Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02dt-bindings: mfd: pm8008: Add bindingsGuru Das Srinagesh1-0/+121
Add bindings for the Qualcomm Technologies, Inc. PM8008 MFD driver. Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02dt-bindings: mfd: pm8008: Add IRQ listingGuru Das Srinagesh1-0/+19
Add a header file listing all of the IRQs that Qualcomm Technologies, Inc. PM8008 supports. The constants defined in this file may be used in the client device tree node to specify interrupts. Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: da9063: Propagate errno when I2C mode failsWolfram Sang1-1/+1
Don't hardocde EIO but use the obtained value. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Mark Jonas <mark.jonas@de.bosch.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: bd71828: Fix .n_voltages settingsAxel Lin1-5/+5
Current .n_voltages settings do not cover the latest 2 valid selectors, so it fails to set voltage for the hightest voltage support. The latest linear range has step_uV = 0, so it does not matter if we count the .n_voltages to maximum selector + 1 or the first selector of latest linear range + 1. To simplify calculating the n_voltages, let's just set the .n_voltages to maximum selector + 1. Fixes: 522498f8cb8c ("regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators") Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: hisilicon: Use the correct HiSilicon copyrightHao Fang2-2/+2
s/Hisilicon/HiSilicon/ It should use capital S, according to the official website https://www.hisilicon.com/en. Signed-off-by: Hao Fang <fanghao11@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: cpcap: Fix cpcap dmamask not set warningsTony Lindgren1-0/+4
We have started to get a bunch of pointless dmamask not set warnings that makes the output of dmesg -l err,warn hard to read with many extra warnings: cpcap-regulator cpcap-regulator.0: DMA mask not set cpcap_adc cpcap_adc.0: DMA mask not set cpcap_battery cpcap_battery.0: DMA mask not set cpcap-charger cpcap-charger.0: DMA mask not set cpcap-pwrbutton cpcap-pwrbutton.0: DMA mask not set cpcap-led cpcap-led.0: DMA mask not set cpcap-led cpcap-led.1: DMA mask not set cpcap-led cpcap-led.2: DMA mask not set cpcap-led cpcap-led.3: DMA mask not set cpcap-led cpcap-led.4: DMA mask not set cpcap-rtc cpcap-rtc.0: DMA mask not set cpcap-usb-phy cpcap-usb-phy.0: DMA mask not set This seems to have started with commit 4d8bde883bfb ("OF: Don't set default coherent DMA mask"). We have the parent SPI controller use DMA, while CPCAP driver and it's children do not. For audio, the DMA is handled over I2S bus with the McBSP driver. Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Ivan Jelincic <parazyd@dyne.org> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sicelo A. Mhlongo <absicsz@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: arizona: Allow building arizona MFD-core as moduleHans de Goede4-13/+15
There is no reason why the arizona core,irq and codec model specific regmap bits cannot be build as a module. All they do is export symbols which are used by the arizona-spi/i2c and arizona-codec modules, which themselves can be built as module. Change the Kconfig and Makefile arizona bits so that the arizona MFD-core can be built as a module. This is especially useful on x86 platforms with a WM5102 codec, this allows the arizona MFD driver necessary for the WM5102 codec to be enabled in generic distro-kernels without growing the base kernel-image size. Note this also adds an explicit "depends on MFD_ARIZONA" to all the arizona codec Kconfig options. The codec drivers use functions from mfd arizona-core. These new depends are necessary to disallow the codec drivers being builtin when the arizona-core is build as a module, otherwise we end up with missing symbol errors when building vmlinuz. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: db8500-prcmu: Add devicetree bindingsLinus Walleij1-0/+278
This driver was merged in the early days of device tree on Arm in 2012 and somehow we failed to provide bindings for it. Fix it up with some YAML bindings. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: si476x-i2c: Fix incorrectly documented function namesLee Jones1-5/+5
Fixes the following W=1 kernel build warning(s): drivers/mfd/si476x-i2c.c:360: warning: expecting prototype for si476x_drain_rds_fifo(). Prototype was for si476x_core_drain_rds_fifo() instead drivers/mfd/si476x-i2c.c:467: warning: expecting prototype for si476x_get_status(). Prototype was for si476x_core_get_status() instead drivers/mfd/si476x-i2c.c:484: warning: expecting prototype for si476x_get_and_signal_status(). Prototype was for si476x_core_get_and_signal_status() instead drivers/mfd/si476x-i2c.c:555: warning: expecting prototype for si476x_firmware_version_to_revision(). Prototype was for si476x_core_fwver_to_revision() instead drivers/mfd/si476x-i2c.c:619: warning: expecting prototype for si476x_get_revision_info(). Prototype was for si476x_core_get_revision_info() instead Cc: Lee Jones <lee.jones@linaro.org> Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: si476x-cmd: Fix a bunch of incorrectly documented function namesLee Jones1-12/+12
Fixes the following W=1 kernel build warning(s): drivers/mfd/si476x-cmd.c:406: warning: expecting prototype for si476x_cmd_func_info(). Prototype was for si476x_core_cmd_func_info() instead drivers/mfd/si476x-cmd.c:437: warning: expecting prototype for si476x_cmd_set_property(). Prototype was for si476x_core_cmd_set_property() instead drivers/mfd/si476x-cmd.c:463: warning: expecting prototype for si476x_cmd_get_property(). Prototype was for si476x_core_cmd_get_property() instead drivers/mfd/si476x-cmd.c:525: warning: expecting prototype for si476x_cmd_dig_audio_pin_cfg(). Prototype was for si476x_core_cmd_dig_audio_pin_cfg() instead drivers/mfd/si476x-cmd.c:574: warning: expecting prototype for si476x_cmd_zif_pin_cfg(). Prototype was for si476x_core_cmd_zif_pin_cfg() instead drivers/mfd/si476x-cmd.c:631: warning: expecting prototype for si476x_cmd_ic_link_gpo_ctl_pin_cfg(). Prototype was for si476x_core_cmd_ic_link_gpo_ctl_pin_cfg() instead drivers/mfd/si476x-cmd.c:662: warning: expecting prototype for si476x_cmd_ana_audio_pin_cfg(). Prototype was for si476x_core_cmd_ana_audio_pin_cfg() instead drivers/mfd/si476x-cmd.c:697: warning: expecting prototype for si476x_cmd_intb_pin_cfg(). Prototype was for si476x_core_cmd_intb_pin_cfg_a10() instead drivers/mfd/si476x-cmd.c:742: warning: expecting prototype for si476x_cmd_am_rsq_status(). Prototype was for si476x_core_cmd_am_rsq_status() instead drivers/mfd/si476x-cmd.c:874: warning: expecting prototype for si476x_cmd_fm_seek_start(). Prototype was for si476x_core_cmd_fm_seek_start() instead drivers/mfd/si476x-cmd.c:905: warning: expecting prototype for si476x_cmd_fm_rds_status(). Prototype was for si476x_core_cmd_fm_rds_status() instead drivers/mfd/si476x-cmd.c:1050: warning: expecting prototype for si476x_cmd_am_seek_start(). Prototype was for si476x_core_cmd_am_seek_start() instead Cc: Lee Jones <lee.jones@linaro.org> Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: omap-usb-tll: File headers are not good candidates for kernel-docLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/mfd/omap-usb-tll.c:24: warning: expecting prototype for omap(). Prototype was for USBTLL_DRIVER_NAME() instead Cc: Tony Lindgren <tony@atomide.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Keshava Munegowda <keshava_mgowda@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: omap-usb-host: File headers are not good candidates for kernel-docLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/mfd/omap-usb-host.c:26: warning: expecting prototype for omap(). Prototype was for USBHS_DRIVER_NAME() instead Cc: Tony Lindgren <tony@atomide.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Keshava Munegowda <keshava_mgowda@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: db8500-prcmu: Fix multiple incorrectly documented function namesLee Jones1-3/+3
Fixes the following W=1 kernel build warning(s): drivers/mfd/db8500-prcmu.c:624: warning: expecting prototype for prcmu_get_current_mode(). Prototype was for prcmu_get_xp70_current_state() instead drivers/mfd/db8500-prcmu.c:908: warning: expecting prototype for db8500_set_ape_opp(). Prototype was for db8500_prcmu_set_ape_opp() instead drivers/mfd/db8500-prcmu.c:2303: warning: expecting prototype for db8500_prcmu_reset_modem(). Prototype was for db8500_prcmu_modem_reset() instead Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Kumar Sanghvi <kumar.sanghvi@stericsson.com> Cc: Sundar Iyer <sundar.iyer@stericsson.com> Cc: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: twl-core: Fix incorrect function name twl_regcache_bypass()Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/mfd/twl-core.c:496: warning: expecting prototype for twl_regcache_bypass(). Prototype was for twl_set_regcache_bypass() instead Cc: Tony Lindgren <tony@atomide.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Kai Svahn <kai.svahn@nokia.com> Cc: syed khasim <x0khasim@ti.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: wm831x-core: Fix incorrect function name wm831x_reg_unlock()Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/mfd/wm831x-core.c:121: warning: expecting prototype for wm831x_reg_unlock(). Prototype was for wm831x_reg_lock() instead Cc: Lee Jones <lee.jones@linaro.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: patches@opensource.cirrus.com Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02Revert "MAINTAINERS: Add entry for Intel MAX 10 mfd driver"Lee Jones1-10/+0
This reverts commit 58d91f1c1701de9420acc43a2f4f8004af85c363. This is a duplicate. Reported-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: ioc3: Directly include linux/irqdomain.hMarc Zyngier1-0/+1
This driver include linux/irqdomain.h via a bizarre set of indirection, which we are about to break. Directly include the required file. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: axp20x: Allow AXP 806 chips without interrupt linesAndre Przywara1-7/+17
Currently the AXP chip requires to have its IRQ line connected to some interrupt controller, and will fail probing when this is not the case. On a new Allwinner SoC (H616) there is no NMI pin anymore, and at least one board does not connect the AXP's IRQ pin to anything else, so the interrupt functionality of the AXP chip is simply not available. Check whether the interrupt line number returned by the platform code is valid, before trying to register the irqchip. If not, we skip this registration, to avoid the driver to bail out completely. Also we need to skip the power key functionality, as this relies on a valid IRQ as well. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6360: Merge different sub-devices I2C read/writeGene Chen2-23/+181
Merge different sub-devices I2C read/write functions into one Regmap, because PMIC and LDO part need CRC bits for access protection. Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6360: Merge header file into driver and remove unuse register defineGene Chen2-241/+47
Merge header file into driver and remove unuse register define Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6360: Fix flow which is used to check ic existGene Chen1-11/+21
Fix flow which is used to check ic exist. Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6360: Remove handle_post_irq callback functionGene Chen2-14/+5
Remove handle_post_irq which is used to retrigger IRQ. Set IRQ level low trigger in dtsi to keep IRQ always be handled. Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6360: Rename mt6360_pmu by mt6360Gene Chen1-21/+20
Rename mt6360_pmu by mt6360, because of including not only PMU part, but also entire MT6360 IC Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6360: Rename mt6360_pmu_data by mt6360_ddataGene Chen2-23/+23
Rename mt6360_pmu_data by mt6360_ddata because of including not only PMU part, but also entire MT6360 IC. Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6360: Combine mt6360 pmic/ldo resources into mt6360 regulator resourcesGene Chen1-8/+2
Combine mt6360 pmic/ldo resources into mt6360 regulator resources to simplify the similar resources object. Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6360: Indicate sub-dev compatible name by using "-"Gene Chen1-12/+12
Indicate sub-dev compatible name by using "-". Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6360: Remove redundant brackets around raw numbersGene Chen2-291/+291
Remove redundant brackets around raw numbers. Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6360: Rearrange include fileGene Chen1-2/+3
Rearrange include file without sorting by alphabet. Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: rt4831: Adds DT binding document for Richtek RT4831ChiYuan Huang1-0/+90
Adds DT binding document for Richtek RT4831. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: rt4831: Adds support for Richtek RT4831ChiYuan Huang3-0/+126
This adds support Richtek RT4831 core. It includes four channel WLED driver and Display Bias Voltage outputs. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02backlight: rt4831: Adds DT binding document for Richtek RT4831 backlightChiYuan Huang2-0/+85
Adds DT binding document for Richtek RT4831 backlight. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: rn5t618: Fix IRQ trigger by changing it to level modeAndreas Kemnade1-1/+1
During more massive generation of interrupts, the IRQ got stuck, and the subdevices did not see any new interrupts. That happens especially at wonky USB supply in combination with ADC reads. To fix that trigger the IRQ at level low instead of falling edge. Fixes: 0c81604516af ("mfd: rn5t618: Add IRQ support") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: max8907: Move to use request_irq by IRQF_NO_AUTOEN flagTian Tao1-4/+2
This change is just to simplify the code, no actual functional changes. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: google,cros-ec: add DT bindings for a baseboard's switch deviceIkjoon Jang1-0/+20
This is for ChromeOS tablets which have a 'cros_cbas' switch device in the "Whiskers" base board. This device can be instantiated only by device tree on ARM platforms. ChromeOS EC doesn't provide a way to probe the device. Signed-off-by: Ikjoon Jang <ikjn@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: lp87565: Handle optional reset pinLuca Ceresoli2-0/+28
Optionally handle the NRST pin (active low reset) in order to start from a known state during boot and to shut down the chip when rebooting. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: da9052/stmpe: Add and modify MODULE_DEVICE_TABLEZou Wei2-1/+2
This patch adds/modifies MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: syscon: Free the allocated name field of struct regmap_configLimeng1-1/+1
The commit 529a1101212a("mfd: syscon: Don't free allocated name for regmap_config") doesn't free the allocated name field of struct regmap_config, but introduce a memory leak. There is another commit 94cc89eb8fa5("regmap: debugfs: Fix handling of name string for debugfs init delays") fixing this debugfs init issue from root cause. With this fixing, the name field in struct regmap_debugfs_node is removed. When initialize debugfs for syscon driver, the name field of struct regmap_config is not used anymore. So, the allocated name field of struct regmap_config is need to be freed directly after regmap initialization to avoid memory leak. Cc: stable@vger.kernel.org Fixes: 529a1101212a("mfd: syscon: Don't free allocated name for regmap_config") Signed-off-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: Remove software node conditionally and locate at right placeAndy Shevchenko1-6/+9
Currently the software node is removed in error case and at ->remove() stage unconditionally, that ruins the symmetry. Besides, in some cases, when mfd_add_device() fails, the device_remove_software_node() call may lead to NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 00000000 ... EIP: strlen+0x12/0x20 ... kernfs_name_hash+0x13/0x70 kernfs_find_ns+0x32/0xc0 kernfs_remove_by_name_ns+0x2a/0x90 sysfs_remove_link+0x16/0x30 software_node_notify.cold+0x34/0x6b device_remove_software_node+0x5a/0x90 mfd_add_device.cold+0x30a/0x427 Fix all these by guarding device_remove_software_node() with a conditional and locating it at the right place. Fixes: 42e59982917a ("mfd: core: Add support for software nodes") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: wcd934x: Add additional interrupts required for MBHC supportSrinivas Kandagatla1-0/+7
WCD934x supports Multi Button Headset control which enable headset detection along with headset button detection. This patch adds interrupts required for MBHC functionality. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: wcd934x: Add macro for adding new interruptsSrinivas Kandagatla1-26/+17
Currently only two interrupts supported is added in wcd934x interrupt controller, however if we are adding more interrupts the file will become too much unreadable. So add a macro to make adding new interrupts easy and also convert existing slim and soundwire interrupts to use it. This is in preparation to enable Multi Button Headset Control support on this codec. WCD934x supports Multi Button Headset control which enable headset detection along with headset button detection. This patch adds interrupts required for MBHC functionality. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: si476x-cmd: Fix two typos of 'returned'Jian Dong1-2/+2
Fix two typos retured --> returned Signed-off-by: Jian Dong <dongjian@yulong.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6397: Add PMIC keys for MT6358Mattijs Korpershoek1-0/+12
Add compatible strings and interrupts for pmic keys which serves as child device of MFD. MT6358 has two interrupts per key: one for press, another one for release (_R) Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6397: Use named IRQs instead of index (keys)Mattijs Korpershoek1-4/+4
Some pmics of the mt6397 family (such as MT6358), have two IRQs per physical key: one for press event, another for release event. The mtk-pmic-keys driver assumes that each key only has one IRQ. The key index and the RES_IRQ resource index have a 1/1 mapping. This won't work for MT6358, as we have multiple resources (2) for one key. To prepare mtk-pmic-keys to support MT6358, retrieve IRQs by name instead of by index. Note: The keys_resources are not part of the device-tree bindings so this won't break any DT schemas. Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6397: Add MT6358 register definitions for power keyMattijs Korpershoek1-0/+2
To support power/home key detection, add definitions for two more MT6358 PMIC registers: - TOPSTATUS: homekey and powerkey debounce status - TOP_RST_MISC: controls homekey,powerkey long press reset time Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mp2629: Select MFD_CORE to fix build errorRandy Dunlap1-0/+1
MFD_MP2629 should select MFD_CORE to a prevent build error: ERROR: modpost: "devm_mfd_add_devices" [drivers/mfd/mp2629.ko] undefined! Fixes: 06081646450e ("mfd: mp2629: Add support for mps battery charger") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: intel-lpss: Add Intel Alder Lake-M PCI IDsAndy Shevchenko1-0/+13
Add Intel Alder Lake-M LPSS PCI IDs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02Merge tags 'tb-mfd-asoc-v5.14-1', 'tb-mfd-gpio-regulator-v5.14' and ↵Lee Jones18-61/+2522
'tb-mfd-regulator-rtc-v5.14' into ibs-for-mfd-merged Immutable branch between MFD and ASoC due for the v5.14 merge window Immutable branch between MFD, GPIO and Regulator due for the v5.14 merge window Immutable branch between MFD, Regulator and RTC due for the v5.14 merge window
2021-06-02ASoC: rk817: fix a warning in rk817_probe()Chris Morgan1-2/+1
The return value of snd_soc_component_write() is stored but not evaluated and this results in a warning when W=1 is set. Stop storing the return value to be consistent with all other calls of snd_soc_component_write() and to remove the warning. Fixes: 0d6a04da9b25 ("ASoC: Add Rockchip rk817 audio CODEC support") Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-01regulator: mt6359: Add support for MT6359P regulatorHsin-Hsiung Wang3-6/+623
The MT6359P is a eco version for MT6359 regulator. We add support based on MT6359 regulator driver. Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-14 06:36:10 +0000