summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-01-25alpha: add standard statfs64/fstatfs64 syscallsArnd Bergmann1-0/+2
As Joseph Myers points out, alpha has never had a standard statfs64 interface and instead returns only 32-bit numbers here. While there is an old osf_statfs64 system call that returns additional data, this has some other quirks and does not get used in glibc. I considered making the stat64 structure layout compatible with with the one used by the kernel on most other 64 bit architecture that implement it (ia64, parisc, powerpc, and sparc), but in the end decided to stay with the one that was traditionally defined in the alpha headers but not used, since this is also what glibc exposes to user space. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-25arch: add pkey and rseq syscall numbers everywhereArnd Bergmann12-15/+28
Most architectures define system call numbers for the rseq and pkey system calls, even when they don't support the features, and perhaps never will. Only a few architectures are missing these, so just define them anyway for consistency. If we decide to add them later to one of these, the system call numbers won't get out of sync then. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-01-25arch: add split IPC system calls where neededArnd Bergmann9-0/+84
The IPC system call handling is highly inconsistent across architectures, some use sys_ipc, some use separate calls, and some use both. We also have some architectures that require passing IPC_64 in the flags, and others that set it implicitly. For the addition of a y2038 safe semtimedop() system call, I chose to only support the separate entry points, but that requires first supporting the regular ones with their own syscall numbers. The IPC_64 is now implied by the new semctl/shmctl/msgctl system calls even on the architectures that require passing it with the ipc() multiplexer. I'm not adding the new semtimedop() or semop() on 32-bit architectures, those will get implemented using the new semtimedop_time64() version that gets added along with the other time64 calls. Three 64-bit architectures (powerpc, s390 and sparc) get semtimedop(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-01-25ipc: rename old-style shmctl/semctl/msgctl syscallsArnd Bergmann14-62/+137
The behavior of these system calls is slightly different between architectures, as determined by the CONFIG_ARCH_WANT_IPC_PARSE_VERSION symbol. Most architectures that implement the split IPC syscalls don't set that symbol and only get the modern version, but alpha, arm, microblaze, mips-n32, mips-n64 and xtensa expect the caller to pass the IPC_64 flag. For the architectures that so far only implement sys_ipc(), i.e. m68k, mips-o32, powerpc, s390, sh, sparc, and x86-32, we want the new behavior when adding the split syscalls, so we need to distinguish between the two groups of architectures. The method I picked for this distinction is to have a separate system call entry point: sys_old_*ctl() now uses ipc_parse_version, while sys_*ctl() does not. The system call tables of the five architectures are changed accordingly. As an additional benefit, we no longer need the configuration specific definition for ipc_parse_version(), it always does the same thing now, but simply won't get called on architectures with the modern interface. A small downside is that on architectures that do set ARCH_WANT_IPC_PARSE_VERSION, we now have an extra set of entry points that are never called. They only add a few bytes of bloat, so it seems better to keep them compared to adding yet another Kconfig symbol. I considered adding new syscall numbers for the IPC_64 variants for consistency, but decided against that for now. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-25sparc64: fix sparc_ipc type conversionArnd Bergmann1-1/+1
__kernel_timespec and timespec are currently the same type, but once they are different, the type cast has to be changed here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-25sh: add statx system callArnd Bergmann1-0/+1
statx is available on almost all other architectures but got missed on sh, so add it now. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-25sh: remove duplicate unistd_32.h fileArnd Bergmann1-403/+0
When I merged this patch, the file was accidentally left intact instead of being removed, which means any changes to syscall.tbl have no effect. Fixes: 2b3c5a99d5f3 ("sh: generate uapi header and syscall table header files") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-25m68k: assign syscall number for seccompArnd Bergmann1-0/+1
Most architectures have assigned a numbers for the seccomp syscall even when they do not implement it. m68k is an exception here, so for consistency lets add the number. Unless CONFIG_SECCOMP is implemented, the system call just returns -ENOSYS. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-25ARM: add kexec_file_load system call numberArnd Bergmann3-1/+4
A couple of architectures including arm64 already implement the kexec_file_load system call, on many others we have assigned a system call number for it, but not implemented it yet. Adding the number in arch/arm/ lets us use the system call on arm64 systems in compat mode, and also reduces the number of differences between architectures. If we want to implement kexec_file_load on ARM in the future, the number assignment means that kexec tools can already be built with the now current set of kernel headers. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-25ARM: add migrate_pages() system callArnd Bergmann4-2/+4
The migrate_pages system call has an assigned number on all architectures except ARM. When it got added initially in commit d80ade7b3231 ("ARM: Fix warning: #warning syscall migrate_pages not implemented"), it was intentionally left out based on the observation that there are no 32-bit ARM NUMA systems. However, there are now arm64 NUMA machines that can in theory run 32-bit kernels (actually enabling NUMA there would require additional work) as well as 32-bit user space on 64-bit kernels, so that argument is no longer very strong. Assigning the number lets us use the system call on 64-bit kernels as well as providing a more consistent set of syscalls across architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2019-01-25alpha: update syscall macro definitionsArnd Bergmann3-8/+7
Other architectures commonly use __NR_umount2 for sys_umount, only ia64 and alpha use __NR_umount here. In order to synchronize the generated tables, use umount2 like everyone else, and add back the old name from asm/unistd.h for compatibility. For shmat, alpha uses the osf_shmat name, we can do the same thing here, which means we don't have to add an entry in the __IGNORE list now that shmat is mandatory everywhere alarm, creat, pause, time, and utime are optional everywhere these days, no need to list them here any more. I considered also adding the regular versions of the get*id system calls that have different names and calling conventions on alpha, which would further help unify the syscall ABI, but for now I decided against that. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-25alpha: wire up io_pgetevents system callArnd Bergmann1-0/+1
The io_pgetevents system call was added in linux-4.18 but has no entry for alpha: warning: #warning syscall io_pgetevents not implemented [-Wcpp] Assign a the next system call number here. Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-25ia64: assign syscall numbers for perf and seccompArnd Bergmann1-0/+2
Most architectures have assigned numbers for both seccomp and perf_event_open, even when they do not implement either. ia64 is an exception here, so for consistency lets add numbers for both of them. Unless CONFIG_PERF_EVENTS and CONFIG_SECCOMP are implemented, the system calls just return -ENOSYS. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-25ia64: add statx and io_pgetevents syscallsArnd Bergmann1-0/+2
All architectures should implement these two, so assign numbers and hook them up on ia64. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-25ia64: add __NR_umount2 definitionArnd Bergmann3-15/+3
Other architectures commonly use __NR_umount2 for sys_umount, only ia64 and alpha use __NR_umount here. In order to synchronize the generated tables, use umount2 like everyone else, and add back the old name from asm/unistd.h for compatibility. The __IGNORE_* lines are now all obsolete and can be removed as a side-effect. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-18s390: remove compat_wrapper.cArnd Bergmann3-326/+140
Now that all these wrappers are automatically generated, we can remove the entire file, and instead point to the regualar syscalls like all other architectures do. The 31-bit pointer extension is now handled in the __s390_sys_*() wrappers. Link: https://lore.kernel.org/lkml/20190116131527.2071570-6-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-18s390: autogenerate compat syscall wrappersArnd Bergmann5-21/+147
Any system call that takes a pointer argument on s390 requires a wrapper function to do a 31-to-64 zero-extension, these are currently generated in arch/s390/kernel/compat_wrapper.c. On arm64 and x86, we already generate similar wrappers for all system calls in the place of their definition, just for a different purpose (they load the arguments from pt_regs). We can do the same thing here, by adding an asm/syscall_wrapper.h file with a copy of all the relevant macros to override the generic version. Besides the addition of the compat entry point, these also rename the entry points with a __s390_ or __s390x_ prefix, similar to what we do on arm64 and x86. This in turn requires renaming a few things, and adding a proper ni_syscall() entry point. In order to still compile system call definitions that pass an loff_t argument, the __SC_COMPAT_CAST() macro checks for that and forces an -ENOSYS error, which was the best I could come up with. Those functions must obviously not get called from user space, but instead require hand-written compat_sys_*() handlers, which fortunately already exist. Link: https://lore.kernel.org/lkml/20190116131527.2071570-5-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> [heiko.carstens@de.ibm.com: compile fix for !CONFIG_COMPAT] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-18s390: use generic UID16 implementationArnd Bergmann5-252/+41
s390 has an almost identical copy of the code in kernel/uid16.c. The problem here is that it requires calling the regular system calls, which the generic implementation handles correctly, but the internal interfaces are not declared in a global header for this. The best way forward here seems to be to just use the generic code and delete the s390 specific implementation. I keep the changes to uapi/asm/posix_types.h inside of an #ifdef check so user space does not observe any changes. As some of the system calls pass pointers, we also need wrappers in compat_wrapper.c, which I add for all calls with at least one argument. All those wrappers can be removed in a later step. Link: https://lore.kernel.org/lkml/20190116131527.2071570-4-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-18ipc: introduce ksys_ipc()/compat_ksys_ipc() for s390Arnd Bergmann5-6/+25
The sys_ipc() and compat_ksys_ipc() functions are meant to only be used from the system call table, not called by another function. Introduce ksys_*() interfaces for this purpose, as we have done for many other system calls. Link: https://lore.kernel.org/lkml/20190116131527.2071570-3-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> [heiko.carstens@de.ibm.com: compile fix for !CONFIG_COMPAT] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-18s390: open-code s390_personality syscallArnd Bergmann1-2/+5
Patch series "s390: rework compat wrapper generation". As promised, I gave this a go and changed the SYSCALL_DEFINEx() infrastructure to always include the wrappers for doing the 31-bit argument conversion on s390 compat mode. This does three main things: - The UID16 rework saved a lot of duplicated code, and would probably make sense by itself, but is also required as we can no longer call sys_*() functions directly after the last step. - Removing the compat_wrapper.c file is of course the main goal here, in order to remove the need to maintain the compat_wrapper.c file when new system calls get added. Unfortunately, this requires adding some complexity in syscall_wrapper.h, and trades a small reduction in source code lines for a small increase in binary size for unused wrappers. - As an added benefit, the use of syscall_wrapper.h now makes it easy to change the syscall wrappers so they no longer see all user space register contents, similar to changes done in commits fa697140f9a2 ("syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls") and 4378a7d4be30 ("arm64: implement syscall wrappers"). I leave the actual implementation of this for you, if you want to do it later. I did not test the changes at runtime, but I looked at the generated object code, which seems fine here and includes the same conversions as before. This patch(of 5): The sys_personality function is not meant to be called from other system calls. We could introduce an intermediate ksys_personality function, but it does almost nothing, so this just moves the implementation into the caller. Link: https://lore.kernel.org/lkml/20190116131527.2071570-1-arnd@arndb.de Link: https://lore.kernel.org/lkml/20190116131527.2071570-2-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-14Linux 5.0-rc2v5.0-rc2Linus Torvalds1-1/+1
2019-01-14kernel/sys.c: Clarify that UNAME26 does not generate unique versions anymoreJonathan Neuschäfer1-1/+2
UNAME26 is a mechanism to report Linux's version as 2.6.x, for compatibility with old/broken software. Due to the way it is implemented, it would have to be updated after 5.0, to keep the resulting versions unique. Linus Torvalds argued: "Do we actually need this? I'd rather let it bitrot, and just let it return random versions. It will just start again at 2.4.60, won't it? Anybody who uses UNAME26 for a 5.x kernel might as well think it's still 4.x. The user space is so old that it can't possibly care about differences between 4.x and 5.x, can it? The only thing that matters is that it shows "2.4.<largeenough>", which it will do regardless" Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-14Merge tag 'armsoc-fixes' of ↵Linus Torvalds26-93/+321
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A bigger batch than I anticipated this week, for two reasons: - Some fallout on Davinci from board file -> DTB conversion, that also includes a few longer-standing fixes (i.e. not recent regressions). - drivers/reset material that has been in linux-next for a while, but didn't get sent to us until now for a variety of reasons (maintainer out sick, holidays, etc). There's a functional dependency in there such that one platform (Altera's SoCFPGA) won't boot without one of the patches; instead of reverting the patch that got merged, I looked at this set and decided it was small enough that I'll pick it up anyway. If you disagree I can revisit with a smaller set. That being said, there's also a handful of the usual stuff: - Fix for a crash on Armada 7K/8K when the kernel touches PSCI-reserved memory - Fix for PCIe reset on Macchiatobin (Armada 8K development board, what this email is sent from in fact :) - Enable a few new-merged modules for Amlogic in arm64 defconfig - Error path fixes on Integrator - Build fix for Renesas and Qualcomm - Initialization fix for Renesas RZ/G2E .. plus a few more fixlets" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) ARM: integrator: impd1: use struct_size() in devm_kzalloc() qcom-scm: Include <linux/err.h> header gpio: pl061: handle failed allocations ARM: dts: kirkwood: Fix polarity of GPIO fan lines arm64: dts: marvell: mcbin: fix PCIe reset signal arm64: dts: marvell: armada-ap806: reserve PSCI area ARM: dts: da850-lcdk: Correct the sound card name ARM: dts: da850-lcdk: Correct the audio codec regulators ARM: dts: da850-evm: Correct the sound card name ARM: dts: da850-evm: Correct the audio codec regulators ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries ARM: davinci: dm355-evm: fix label names in GPIO lookup entries ARM: davinci: da850-evm: fix label names in GPIO lookup entries ARM: davinci: da830-evm: fix label names in GPIO lookup entries arm64: defconfig: enable modules for amlogic s400 sound card reset: uniphier-glue: Add AHCI reset control support in glue layer dt-bindings: reset: uniphier: Add AHCI core reset description reset: uniphier-usb3: Rename to reset-uniphier-glue dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals ...
2019-01-14Merge tag 'for-5.0-rc1-tag' of ↵Linus Torvalds3-13/+64
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - two regression fixes in clone/dedupe ioctls, the generic check callback needs to lock extents properly and wait for io to avoid problems with writeback and relocation - fix deadlock when using free space tree due to block group creation - a recently added check refuses a valid fileystem with seeding device, make that work again with a quickfix, proper solution needs more intrusive changes * tag 'for-5.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: Use real device structure to verify dev extent Btrfs: fix deadlock when using free space tree due to block group creation Btrfs: fix race between reflink/dedupe and relocation Btrfs: fix race between cloning range ending at eof and writeback
2019-01-14Merge tag 'driver-core-5.0-rc2' of ↵Linus Torvalds6-10/+17
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here is one small sysfs change, and a documentation update for 5.0-rc2 The sysfs change moves from using BUG_ON to WARN_ON, as discussed in an email thread on lkml while trying to track down another driver bug. sysfs should not be crashing and preventing people from seeing where they went wrong. Now it properly recovers and warns the developer. The documentation update removes the use of BUS_ATTR() as the kernel is moving away from this to use the specific BUS_ATTR_RW() and friends instead. There are pending patches in all of the different subsystems to remove the last users of this macro, but for now, don't advertise it should be used anymore to keep new ones from being introduced. Both have been in linux-next with no reported issues" * tag 'driver-core-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation: driver core: remove use of BUS_ATTR sysfs: convert BUG_ON to WARN_ON
2019-01-14Merge tag 'staging-5.0-rc2' of ↵Linus Torvalds3-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for some reported issues. One reverts a patch that was made to the rtl8723bs driver that turned out to not be needed at all as it was a bug in clang. The others fix up some reported issues in the rtl8188eu driver and update the MAINTAINERS file to point to Larry for this driver so he can get the bug reports easier. All have been in linux-next with no reported issues" * tag 'staging-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Revert "staging: rtl8723bs: Mark ACPI table declaration as used" staging: rtl8188eu: Fix module loading from tasklet for WEP encryption staging: rtl8188eu: Fix module loading from tasklet for CCMP encryption MAINTAINERS: Add entry for staging driver r8188eu
2019-01-14Merge tag 'tty-5.0-rc2' of ↵Linus Torvalds2-24/+32
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are 2 tty and serial fixes for 5.0-rc2 that resolve some reported issues. The first is a simple serial driver fix for a regression that showed up in 5.0-rc1. The second one resolves a number of reported issues with the recent tty locking fixes that went into 5.0-rc1. Lots of people have tested the second one and say it resolves their issues. Both have been in linux-next with no reported issues" * tag 'tty-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Don't hold ldisc lock in tty_reopen() if ldisc present serial: lantiq: Do not swap register read/writes
2019-01-14Merge tag 'usb-5.0-rc2' of ↵Linus Torvalds6-7/+33
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB driver fixes and quirk updates for 5.0-rc2. The majority here are some quirks for some storage devices to get them to work properly. There's also a fix here to resolve the reported issues with some audio devices that say they are UAC3 compliant, but really are not. And a fix up for the MAINTAINERS file to remove a dead url. All have been in linux-next with no reported issues" * tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: storage: Remove outdated URL from MAINTAINERS USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB usbcore: Select only first configuration for non-UAC3 compliant devices USB: storage: add quirk for SMI SM3350 USB: storage: don't insert sane sense for SPC3+ when bad sense specified usb: cdc-acm: send ZLP for Telit 3G Intel based modems
2019-01-14Merge tag '5.0-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds10-65/+211
Pull cifs fixes from Steve French: "A set of cifs/smb3 fixes, 4 for stable, most from Pavel. His patches fix an important set of crediting (flow control) problems, and also two problems in cifs_writepages, ddressing some large i/o and also compounding issues" * tag '5.0-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number CIFS: Fix error paths in writeback code CIFS: Move credit processing to mid callbacks for SMB3 CIFS: Fix credits calculation for cancelled requests cifs: Fix potential OOB access of lock element array cifs: Limit memory used by lock request calls to a page cifs: move large array from stack to heap CIFS: Do not hide EINTR after sending network packets CIFS: Fix credit computation for compounded requests CIFS: Do not set credits to 1 if the server didn't grant anything CIFS: Fix adjustment of credits for MTU requests cifs: Fix a tiny potential memory leak cifs: Fix a debug message
2019-01-12Merge tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux into ↵Olof Johansson11-52/+212
fixes Late reset controller changes for v5.0 This adds missing deassert functionality to the ARC HSDK reset driver, fixes some indentation and grammar issues in the kernel docs, adds a helper to count the number of resets on a device for the non-DT case as well, adds an early reset driver for SoCFPGA and simple reset driver support for Stratix10, and generalizes the uniphier USB3 glue layer reset to also cover AHCI. * tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux: reset: uniphier-glue: Add AHCI reset control support in glue layer dt-bindings: reset: uniphier: Add AHCI core reset description reset: uniphier-usb3: Rename to reset-uniphier-glue dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals ARM: socfpga: dts: document "altr,stratix10-rst-mgr" binding reset: socfpga: add an early reset driver for SoCFPGA reset: fix null pointer dereference on dev by dev_name reset: Add reset_control_get_count() reset: Improve reset controller kernel docs ARC: HSDK: improve reset driver Signed-off-by: Olof Johansson <olof@lixom.net>
2019-01-12Merge tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson3-3/+20
mvebu fixes for 5.0 They are all device tree fixes which also worth being in stable: - Reserve PSCI area on Armada 7K/8K preventing the kernel accessing this area and crashing while doing it. - Use correct PCIe reset signal on MACCHIATOBin (Armada 8040 based) - Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based) * tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu: ARM: dts: kirkwood: Fix polarity of GPIO fan lines arm64: dts: marvell: mcbin: fix PCIe reset signal arm64: dts: marvell: armada-ap806: reserve PSCI area Signed-off-by: Olof Johansson <olof@lixom.net>
2019-01-12Merge tag 'integrator-fixes-armsoc' of ↵Olof Johansson1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into fixes Fixes for the Integrator: - Handle failed allocations in the IM/PC bus attachment. - Use struct_size() for allocation. * tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: integrator: impd1: use struct_size() in devm_kzalloc() gpio: pl061: handle failed allocations Signed-off-by: Olof Johansson <olof@lixom.net>
2019-01-12Merge tag 'amlogic-fixes' of ↵Olof Johansson1-0/+4
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes Amlogic DT fixes for v5.0-rc - arm64: defconfig: enable modules for amlogic s400 sound card * tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: defconfig: enable modules for amlogic s400 sound card Signed-off-by: Olof Johansson <olof@lixom.net>
2019-01-12Merge tag 'qcom-fixes-for-5.0-rc1' of ↵Olof Johansson1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes Qualcomm Driver Fixes for 5.0-rc1 * Add required includes into qcom_scm.h * tag 'qcom-fixes-for-5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: qcom-scm: Include <linux/err.h> header Signed-off-by: Olof Johansson <olof@lixom.net>
2019-01-12Merge tag 'davinci-fixes-for-v5.0' of ↵Olof Johansson7-16/+73
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes This pull request fixes some more regressions on legacy DaVinci board support due to GPIO driver clean-up introduced in v4.20 kernel. These are marked for stable. Also has fixes for some long standing Audio issues on DA850 boards. * tag 'davinci-fixes-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850-lcdk: Correct the sound card name ARM: dts: da850-lcdk: Correct the audio codec regulators ARM: dts: da850-evm: Correct the sound card name ARM: dts: da850-evm: Correct the audio codec regulators ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries ARM: davinci: dm355-evm: fix label names in GPIO lookup entries ARM: davinci: da850-evm: fix label names in GPIO lookup entries ARM: davinci: da830-evm: fix label names in GPIO lookup entries Signed-off-by: Olof Johansson <olof@lixom.net>
2019-01-12Merge tag 'renesas-fixes-for-v5.0' of ↵Olof Johansson2-20/+5
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Renesas ARM Based SoC Fixes for v5.0 Renesas SoCs: * Fix build regressions caused by move of Kconfig symbols RZ/G2E (r8a774c0) SoC: * Correct initialization order of 3DG-{A,B} in SYSC driver * tag 'renesas-fixes-for-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: r8a774c0-sysc: Fix initialization order of 3DG-{A,B} ARM: shmobile: fix build regressions Signed-off-by: Olof Johansson <olof@lixom.net>
2019-01-12phy: fix build breakage: add PHY_MODE_SATAJohn Hubbard2-2/+4
Commit 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") uses the PHY_MODE_SATA, but that enum had not yet been added. This caused a build failure for me, with today's linux.git. Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding in the Marvell Berlin SATA PHY driver. Fix the build by: 1) Renaming Marvell's defined value to a more scoped name, in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA. 2) Adding the missing enum, which was going to be added anyway as part of [1]. [1] https://lkml.kernel.org/r/20190108163124.6409-3-miquel.raynal@bootlin.com Fixes: 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Acked-by: Olof Johansson <olof@lixom.net> Cc: Grzegorz Jaszczyk <jaz@semihalf.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-12Merge tag 'for-linus-20190112' of git://git.kernel.dk/linux-blockLinus Torvalds16-66/+229
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph, with little fixes all over the map - Loop caching fix for offset/bs change (Jaegeuk Kim) - Block documentation tweaks (Jeff, Jon, Weiping, John) - null_blk zoned tweak (John) - ahch mvebu suspend/resume support. Should have gone into the merge window, but there was some confusion on which tree had it. (Miquel) * tag 'for-linus-20190112' of git://git.kernel.dk/linux-block: (22 commits) ata: ahci: mvebu: request PHY suspend/resume for Armada 3700 ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs ata: ahci: mvebu: remove stale comment ata: libahci_platform: comply to PHY framework loop: drop caches if offset or block_size are changed block: fix kerneldoc comment for blk_attempt_plug_merge() nvme: don't initlialize ctrl->cntlid twice nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN nvme: pad fake subsys NQN vid and ssvid with zeros nvme-multipath: zero out ANA log buffer nvme-fabrics: unset write/poll queues for discovery controllers nvme-tcp: don't ask if controller is fabrics nvme-tcp: remove dead code nvme-pci: fix out of bounds access in nvme_cqe_pending nvme-pci: rerun irq setup on IO queue init errors nvme-pci: use the same attributes when freeing host_mem_desc_bufs. nvme-pci: fix the wrong setting of nr_maps block: doc: add slice_idle_us to bfq documentation block: clarify documentation for blk_{start|finish}_plug ...
2019-01-12Merge tag 'remove-dma_zalloc_coherent-5.0' of ↵Linus Torvalds179-975/+923
git://git.infradead.org/users/hch/dma-mapping Pull dma_zalloc_coherent() removal from Christoph Hellwig: "We've always had a weird situation around dma_zalloc_coherent. To safely support mapping the allocations to userspace major architectures like x86 and arm have always zeroed allocations from dma_alloc_coherent, but a couple other architectures were missing that zeroing either always or in corner cases. Then later we grew anothe dma_zalloc_coherent interface to explicitly request zeroing, but that just added __GFP_ZERO to the allocation flags, which for some allocators that didn't end up using the page allocator ended up being a no-op and still not zeroing the allocations. So for this merge window I fixed up all remaining architectures to zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a no-op wrapper around dma_alloc_coherent, which fixes all of the above issues. dma_zalloc_coherent is now pointless and can go away, and Luis helped me writing a cocchinelle script and patch series to kill it, which I think we should apply now just after -rc1 to finally settle these issue" * tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: remove dma_zalloc_coherent() cross-tree: phase out dma_zalloc_coherent() on headers cross-tree: phase out dma_zalloc_coherent()
2019-01-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds5-7/+14
Pull KVM fixes from Radim Krčmář: "Minor fixes for new code, corner cases, and documentation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: x86/kvm/nVMX: don't skip emulated instruction twice when vmptr address is not backed Documentation/virtual/kvm: Update URL for AMD SEV API specification KVM/VMX: Avoid return error when flush tlb successfully in the hv_remote_flush_tlb_with_range() kvm: sev: Fail KVM_SEV_INIT if already initialized KVM: validate userspace input in kvm_clear_dirty_log_protect() KVM: x86: Fix bit shifting in update_intel_pt_cfg
2019-01-12Merge tag 'drm-fixes-2019-01-11-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds16-102/+192
Pull more drm fixes from Daniel Vetter: "Dave sends out his pull, everybody remembers holidays are over :-) Since Dave's already in weekend mode and it was quite a few patches I figured better to apply all the pulls and forward them to you. Hence here 2nd part of bugfixes for -rc2. nouveau: - backlight fix - falcon register access fix - fan fix. i915: - Disable PSR for Apple panels - Broxton ERR_PTR error state fix - Kabylake VECS workaround fix - Unwind failure on pinning the gen7 ppgtt - GVT workload request allocation fix core: - Fix fb-helper to work correctly with SDL 1.2 bugs - Fix lockdep warning in the atomic ioctl and setproperty" * tag 'drm-fixes-2019-01-11-1' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/falcon: avoid touching registers if engine is off drm/nouveau: Don't disable polling in fallback mode drm/nouveau: register backlight on pascal and newer drm: Fix documentation generation for DP_DPCD_QUIRK_NO_PSR drm/i915: init per-engine WAs for all engines drm/i915: Unwind failure on pinning the gen7 ppgtt drm/i915: Skip the ERR_PTR error state drm/i915: Disable PSR in Apple panels gpu/drm: Fix lock held when returning to user space. drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclock drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2 drm/i915/gvt: Fix workload request allocation before request add
2019-01-11ata: ahci: mvebu: request PHY suspend/resume for Armada 3700Miquel Raynal1-0/+3
A feature has been added in the libahci driver: the possibility to set a new flag in hpriv->flags to let the core handle PHY suspend/resume automatically. Make use of this feature to make suspend to RAM work with SATA drives on A3700. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-11ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAMMiquel Raynal1-9/+18
A3700 comphy initialization is done in the firmware (TF-A). Looking at the SATA PHY initialization routine, there is a comment about "vendor specific" registers. Two registers are mentioned. They are not initialized there in the firmware because they are AHCI related, while the firmware at this location does only PHY configuration. The solution to avoid doing such initialization is relying on U-Boot. While this work at boot time, U-Boot is definitely not going to run during a resume after suspending to RAM. Two possible solutions were considered: * Fixing the firmware. * Fixing the kernel driver. The first solution would take ages to propagate, while the second solution is easy to implement as the driver as been a little bit reworked to prepare for such platform configuration. Hence, this patch adds an Armada 3700 configuration function to set these two registers both at boot time (in the probe) and after a suspend (in the resume path). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-11ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCsMiquel Raynal1-17/+51
At the beginning, only Armada 38x SoCs where supported by the ahci_mvebu.c driver. Commit 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant") introduced Armada 3700 support. As opposed to Armada 38x SoCs, the 3700 variants do not have to configure mbus and the regret option. This patch took care of avoiding such configuration when not needed in the probe function, but failed to do the same in the resume path. While doing so looks harmless by experience, let's clean the driver logic and avoid doing this useless configuration with Armada 3700 SoCs. Because the logic is very similar between these two places, it has been decided to factorize this code and put it in a "Armada 38x configuration function". This function is part of a new (per-compatible) platform data structure, so that the addition of such configuration function for Armada 3700 will be eased. Fixes: 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-11ata: ahci: mvebu: remove stale commentMiquel Raynal1-5/+0
For Armada-38x (32-bit) SoCs, PM platform support has been added since: commit 32f9494c9dfd ("ARM: mvebu: prepare pm-board.c for the introduction of Armada 38x support") commit 3cbd6a6ca81c ("ARM: mvebu: Add standby support") For Armada 64-bit SoCs, like the A3700 also using this AHCI driver, PM platform support has always existed. There are even suspend/resume hooks in this driver since: commit d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support") Remove the stale comment at the end of this driver stating that all the above does not exist yet. Fixes: d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-11ata: libahci_platform: comply to PHY frameworkMiquel Raynal2-0/+15
Current implementation of the libahci does not take into account the new PHY framework. Correct the situation by adding a call to phy_set_mode() before phy_power_on(). PHYs should also be handled at suspend/resume time. For this, call ahci_platform_enable/disable_phys() at suspend/resume_host() time. These calls are guarded by a HFLAG (AHCI_HFLAG_SUSPEND_PHYS) that the user of the libahci driver must set manually in hpriv->flags at probe time. This is to avoid breaking users that have not been tested with this change. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Suggested-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-11Merge branch 'i2c/for-current' of ↵Linus Torvalds2-1/+20
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C has one core and one driver bugfix for you" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: tegra: Fix Maximum transfer size i2c: dev: prevent adapter retries and timeout being set as minus value
2019-01-11Merge tag 'arm64-fixes' of ↵Linus Torvalds8-9/+59
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Another handful of arm64 fixes here. Most of the complication comes from improving our kpti code to avoid lengthy pauses (30+ seconds) during boot when we rewrite the page tables. There are also a couple of IORT fixes that came in via Lorenzo. Summary: - Don't error in kexec_file_load if kaslr-seed is missing in device-tree - Fix incorrect argument type passed to iort_match_node_callback() - Fix IORT build failure when CONFIG_IOMMU_API=n - Fix kpti performance regression with new rodata default option - Typo fix" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kexec_file: return successfully even if kaslr-seed doesn't exist ACPI/IORT: Fix rc_dma_get_range() arm64: kpti: Avoid rewriting early page tables when KASLR is enabled arm64: asm-prototypes: Fix fat-fingered typo in comment ACPI/IORT: Fix build when CONFIG_IOMMU_API=n
2019-01-11Merge tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds8-18/+24
Pull ceph updates from Ilya Dryomov: "A patch to allow setting abort_on_full and a fix for an old "rbd unmap" edge case, marked for stable" * tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-client: rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is set ceph: use vmf_error() in ceph_filemap_fault() libceph: allow setting abort_on_full for rbd
2019-01-11Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds43-697/+797
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling updates from Ingo Molnar: "Tooling changes only: fixes and a few stray improvements. Most of the diffstat is dominated by a PowerPC related fix of system call trace output beautification that allows us to (again) use the UAPI header version and sync up with the kernel's version of PowerPC system call names in the arch/powerpc/kernel/syscalls/syscall.tbl header" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) tools headers powerpc: Remove unistd.h perf powerpc: Rework syscall table generation perf symbols: Add 'arch_cpu_idle' to the list of kernel idle symbols tools include uapi: Sync linux/if_link.h copy with the kernel sources tools include uapi: Sync linux/vhost.h with the kernel sources tools include uapi: Sync linux/fs.h copy with the kernel sources perf beauty: Switch from using uapi/linux/fs.h to uapi/linux/mount.h tools include uapi: Grab a copy of linux/mount.h perf top: Lift restriction on using callchains without "sym" in --sort tools lib traceevent: Remove tep_data_event_from_type() API tools lib traceevent: Rename tep_is_file_bigendian() to tep_file_bigendian() tools lib traceevent: Changed return logic of tep_register_event_handler() API tools lib traceevent: Changed return logic of trace_seq_printf() and trace_seq_vprintf() APIs tools lib traceevent: Rename struct cmdline to struct tep_cmdline tools lib traceevent: Initialize host_bigendian at tep_handle allocation tools lib traceevent: Introduce new libtracevent API: tep_override_comm() perf tests: Add a test for the ARM 32-bit [vectors] page perf tools: Make find_vdso_map() more modular perf trace: Fix alignment for [continued] lines perf trace: Fix ')' placement in "interrupted" syscall lines ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-26 19:16:18 +0000