summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-05-24firmware: qcom: scm: Fix crash in qcom_scm_call_atomic1()Niklas Cassel1-4/+4
qcom_scm_call_atomic1() can crash with a NULL pointer dereference at qcom_scm_call_atomic1+0x30/0x48. disassembly of qcom_scm_call_atomic1(): ... <0xc08d73b0 <+12>: ldr r3, [r12] ... (no instruction explicitly modifies r12) 0xc08d73cc <+40>: smc 0 ... (no instruction explicitly modifies r12) 0xc08d73d4 <+48>: ldr r3, [r12] <- crashing instruction ... Since the first ldr is successful, and since r12 isn't explicitly modified by any instruction between the first and the second ldr, it must have been modified by the smc call, which is ok, since r12 is caller save according to the AAPCS. Add r12 to the clobber list so that the compiler knows that the callee potentially overwrites the value in r12. Clobber descriptions may not in any way overlap with an input or output operand. Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-20Linux 4.17-rc6v4.17-rc6Linus Torvalds1-1/+1
2018-05-20Merge branch 'parisc-4.17-5' of ↵Linus Torvalds3-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixlets from Helge Deller: "Three small section mismatch fixes, one of them was found by 0-day test infrastructure" * 'parisc-4.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Move ccio_cujo20_fixup() into init section parisc: Move setup_profiling_timer() out of init section parisc: Move find_pa_parent_type() out of init section
2018-05-20Merge tag 'for-4.17-rc5-tag' of ↵Linus Torvalds7-48/+180
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "We've accumulated some fixes during the last week, some of them were in the works for a longer time but there are some newer ones too. Most of the fixes have a reproducer and fix user visible problems, also candidates for stable kernels. They IMHO qualify for a late rc, though I did not expect that many" * tag 'for-4.17-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix crash when trying to resume balance without the resume flag btrfs: Fix delalloc inodes invalidation during transaction abort btrfs: Split btrfs_del_delalloc_inode into 2 functions btrfs: fix reading stale metadata blocks after degraded raid1 mounts btrfs: property: Set incompat flag if lzo/zstd compression is set Btrfs: fix duplicate extents after fsync of file with prealloc extents Btrfs: fix xattr loss after power failure Btrfs: send, fix invalid access to commit roots due to concurrent snapshotting
2018-05-20Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds9-44/+64
Pull ARM fixes from Russell King: - Łukasz Stelmach spotted a couple of issues with the decompressor. - a couple of kdump fixes found while testing kdump - replace some perl with shell code - resolve SIGFPE breakage - kprobes fixes * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: fix kill( ,SIGFPE) breakage ARM: 8772/1: kprobes: Prohibit kprobes on get_user functions ARM: 8771/1: kprobes: Prohibit kprobes on do_undefinstr ARM: 8770/1: kprobes: Prohibit probing on optimized_callback ARM: 8769/1: kprobes: Fix to use get_kprobe_ctlblk after irq-disabed ARM: replace unnecessary perl with sed and the shell $(( )) operator ARM: kexec: record parent context registers for non-crash CPUs ARM: kexec: fix kdump register saving on panic() ARM: 8758/1: decompressor: restore r1 and r2 just before jumping to the kernel ARM: 8753/1: decompressor: add a missing parameter to the addruart macro
2018-05-20Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds13-129/+585
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "An unfortunately larger set of fixes, but a large portion is selftests: - Fix the missing clusterid initializaiton for x2apic cluster management which caused boot failures due to IPIs being sent to the wrong cluster - Drop TX_COMPAT when a 64bit executable is exec()'ed from a compat task - Wrap access to __supported_pte_mask in __startup_64() where clang compile fails due to a non PC relative access being generated. - Two fixes for 5 level paging fallout in the decompressor: - Handle GOT correctly for paging_prepare() and cleanup_trampoline() - Fix the page table handling in cleanup_trampoline() to avoid page table corruption. - Stop special casing protection key 0 as this is inconsistent with the manpage and also inconsistent with the allocation map handling. - Override the protection key wen moving away from PROT_EXEC to prevent inaccessible memory. - Fix and update the protection key selftests to address breakage and to cover the above issue - Add a MOV SS self test" [ Part of the x86 fixes were in the earlier core pull due to dependencies ] * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) x86/mm: Drop TS_COMPAT on 64-bit exec() syscall x86/apic/x2apic: Initialize cluster ID properly x86/boot/compressed/64: Fix moving page table out of trampoline memory x86/boot/compressed/64: Set up GOT for paging_prepare() and cleanup_trampoline() x86/pkeys: Do not special case protection key 0 x86/pkeys/selftests: Add a test for pkey 0 x86/pkeys/selftests: Save off 'prot' for allocations x86/pkeys/selftests: Fix pointer math x86/pkeys: Override pkey when moving away from PROT_EXEC x86/pkeys/selftests: Fix pkey exhaustion test off-by-one x86/pkeys/selftests: Add PROT_EXEC test x86/pkeys/selftests: Factor out "instruction page" x86/pkeys/selftests: Allow faults on unknown keys x86/pkeys/selftests: Avoid printf-in-signal deadlocks x86/pkeys/selftests: Remove dead debugging code, fix dprint_in_signal x86/pkeys/selftests: Stop using assert() x86/pkeys/selftests: Give better unexpected fault error messages x86/selftests: Add mov_to_ss test x86/mpx/selftests: Adjust the self-test to fresh distros that export the MPX ABI x86/pkeys/selftests: Adjust the self-test to fresh distros that export the pkeys ABI ...
2018-05-20Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull UP timer fix from Thomas Gleixner: "Work around the for_each_cpu() oddity on UP kernels in the tick broadcast code which causes boot failures because the CPU0 bit is always reported as set independent of the cpumask content" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/broadcast: Use for_each_cpu() specially on UP kernels
2018-05-20Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds4-8/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixlets from Thomas Gleixner: "Three trivial fixlets for the scheduler: - move print_rt_rq() and print_dl_rq() declarations to the right place - make grub_reclaim() static - fix the bogus documentation reference in Kconfig" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix documentation file path sched/deadline: Make the grub_reclaim() function static sched/debug: Move the print_rt_rq() and print_dl_rq() declarations to kernel/sched/sched.h
2018-05-20Merge branch 'ras-urgent-for-linus' of ↵Linus Torvalds1-15/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS fix from Thomas Gleixner: "Fix a regression in the new AMD SMCA code which issues an SMP function call from the early interrupt disabled region of CPU hotplug. To avoid that, use cached block addresses which can be used directly" * 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/MCE/AMD: Cache SMCA MISC block addresses
2018-05-20Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds4-6/+29
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling fixes from Thomas Gleixner: - fix segfault when processing unknown threads in cs-etm - fix "perf test inet_pton" on s390 failing due to missing inline - display all available events on 'perf annotate --stdio' - add missing newline when parsing an empty BPF program * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Add missing newline when parsing empty BPF proggie perf cs-etm: Remove redundant space perf cs-etm: Support unknown_thread in cs_etm_auxtrace perf annotate: Display all available events on --stdio perf test: "probe libc's inet_pton" fails on s390 due to missing inline
2018-05-20Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds5-22/+41
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Two fixes to address shortcomings of the rwsem/percpu-rwsem lock debugging code which emits false positive warnings when the rwsem is anonymously locked and unlocked" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/percpu-rwsem: Annotate rwsem ownership transfer by setting RWSEM_OWNER_UNKNOWN locking/rwsem: Add a new RWSEM_ANONYMOUSLY_OWNED flag
2018-05-20Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds3-6/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Thomas Gleixner: - Use explicitely sized type for the romimage pointer in the 32bit EFI protocol struct so a 64bit kernel does not expand it to 64bit. Ditto for the 64bit struct to avoid the reverse issue on 32bit kernels. - Handle randomized tex offset correctly in the ARM64 EFI stub to avoid unaligned data resulting in stack corruption and other hard to diagnose wreckage. * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/libstub/arm64: Handle randomized TEXT_OFFSET efi: Avoid potential crashes, fix the 'struct efi_pci_io_protocol_32' definition for mixed mode
2018-05-20Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds11-77/+206
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Thomas Gleixner: - Unbreak the BPF compilation which got broken by the unconditional requirement of asm-goto, which is not supported by clang. - Prevent probing on exception masking instructions in uprobes and kprobes to avoid the issues of the delayed exceptions instead of having an ugly workaround. - Prevent a double free_page() in the error path of do_kexec_load() - A set of objtool updates addressing various issues mostly related to switch tables and the noreturn detection for recursive sibling calls - Header sync for tools. * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Detect RIP-relative switch table references, part 2 objtool: Detect RIP-relative switch table references objtool: Support GCC 8 switch tables objtool: Support GCC 8's cold subfunctions objtool: Fix "noreturn" detection for recursive sibling calls objtool, kprobes/x86: Sync the latest <asm/insn.h> header with tools/objtool/arch/x86/include/asm/insn.h x86/cpufeature: Guard asm_volatile_goto usage for BPF compilation uprobes/x86: Prohibit probing on MOV SS instruction kprobes/x86: Prohibit probing on exception masking instructions x86/kexec: Avoid double free_page() upon do_kexec_load() failure
2018-05-19Merge tag 'armsoc-fixes' of ↵Linus Torvalds40-96/+300
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A handful of fixes. I've been queuing them up a bit too long so the list is longer than it otherwise would have been spread out across a few -rcs. In general, it's a scattering of fixes across several platforms, nothing truly serious enough to point out. There's a slightly larger batch of them for the Davinci platforms due to work to bring them back to life after some time, so there's a handful of regressions, some of them going back very far, others more recent. There's also a few patches fixing DT on Renesas platforms since they changed some bindings without remaining backwards compatible, splitting up describing LVDS as a proper bridge instead of having it as part of the display unit. We could push for them to be backwards compatible with old device trees, but it's likely to regress eventually if nobody's actually using said compatibility" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits) ARM: davinci: board-dm646x-evm: set VPIF capture card name ARM: davinci: board-dm646x-evm: pass correct I2C adapter id for VPIF ARM: davinci: dm646x: fix timer interrupt generation ARM: keystone: fix platform_domain_notifier array overrun arm64: dts: exynos: Fix interrupt type for I2S1 device on Exynos5433 ARM: dts: imx51-zii-rdu1: fix touchscreen bindings firmware: arm_scmi: Use after free in scmi_create_protocol_device() ARM: dts: cygnus: fix irq type for arm global timer Revert "ARM: dts: logicpd-som-lv: Fix pinmux controller references" tee: check shm references are consistent in offset/size tee: shm: fix use-after-free via temporarily dropped reference ARM: dts: imx7s: Pass the 'fsl,sec-era' property ARM: dts: tegra20: Revert "Fix ULPI regression on Tegra20" ARM: dts: correct missing "compatible" entry for ti81xx SoCs ARM: OMAP1: ams-delta: fix deferred_fiq handler arm64: tegra: Make BCM89610 PHY interrupt as active low ARM: davinci: fix GPIO lookup for I2C ARM: dts: logicpd-som-lv: Fix pinmux controller references ARM: dts: logicpd-som-lv: Fix Audio Mute ARM: dts: logicpd-som-lv: Fix WL127x Startup Issues ...
2018-05-19Merge tag 'tegra-for-4.17-fixes-2' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into fixes arm64: tegra: Device tree fixes for v4.17 This contains a one-line update to the device tree of the Tegra186 P3310 processor module, fixing the polarity of the PHY interrupt. Originally, this was queued to go into v4.18, but the PHY ID matching patch has now found its way into v4.17-rc5, which means that the PHY driver will know how to identify the PHY on this board and try to use the interrupt. This will unfortunately cause networking to break on P3310, hence why I think this should go into v4.17. * tag 'tegra-for-4.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Make BCM89610 PHY interrupt as active low Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-19ARM: fix kill( ,SIGFPE) breakageRussell King2-14/+1
Commit 7771c6645700 ("signal/arm: Document conflicts with SI_USER and SIGFPE") broke the siginfo structure for userspace triggered signals, causing the strace testsuite to regress. Fix this by eliminating the FPE_FIXME definition (which is at the root of the breakage) and use FPE_FLTINV instead for the case where the hardware appears to be reporting nonsense. Fixes: 7771c6645700 ("signal/arm: Document conflicts with SI_USER and SIGFPE") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-05-19Merge tag 'dmaengine-fix-4.17-rc6' of ↵Linus Torvalds2-6/+14
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fix from Vinod Koul: - qcom bam runtime_pm fix - email update for Vinod * tag 'dmaengine-fix-4.17-rc6' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: qcom: bam_dma: check if the runtime pm enabled dmaengine: Update email address for Vinod
2018-05-19mmap: relax file size limit for regular filesLinus Torvalds1-1/+1
Commit be83bbf80682 ("mmap: introduce sane default mmap limits") was introduced to catch problems in various ad-hoc character device drivers doing mmap and getting the size limits wrong. In the process, it used "known good" limits for the normal cases of mapping regular files and block device drivers. It turns out that the "s_maxbytes" limit was less "known good" than I thought. In particular, /proc doesn't set it, but exposes one regular file to mmap: /proc/vmcore. As a result, that file got limited to the default MAX_INT s_maxbytes value. This went unnoticed for a while, because apparently the only thing that needs it is the s390 kernel zfcpdump, but there might be other tools that use this too. Vasily suggested just changing s_maxbytes for all of /proc, which isn't wrong, but makes me nervous at this stage. So instead, just make the new mmap limit always be MAX_LFS_FILESIZE for regular files, which won't affect anything else. It wasn't the regular file case I was worried about. I'd really prefer for maxsize to have been per-inode, but that is not how things are today. Fixes: be83bbf80682 ("mmap: introduce sane default mmap limits") Reported-by: Vasily Gorbik <gor@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-19x86/MCE/AMD: Cache SMCA MISC block addressesBorislav Petkov1-15/+14
... into a global, two-dimensional array and service subsequent reads from that cache to avoid rdmsr_on_cpu() calls during CPU hotplug (IPIs with IRQs disabled). In addition, this fixes a KASAN slab-out-of-bounds read due to wrong usage of the bank->blocks pointer. Fixes: 27bd59502702 ("x86/mce/AMD: Get address from already initialized block") Reported-by: Johannes Hirte <johannes.hirte@datenkhaos.de> Tested-by: Johannes Hirte <johannes.hirte@datenkhaos.de> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Yazen Ghannam <yazen.ghannam@amd.com> Link: http://lkml.kernel.org/r/20180414004230.GA2033@probook
2018-05-19ARM: 8772/1: kprobes: Prohibit kprobes on get_user functionsMasami Hiramatsu2-0/+20
Since do_undefinstr() uses get_user to get the undefined instruction, it can be called before kprobes processes recursive check. This can cause an infinit recursive exception. Prohibit probing on get_user functions. Fixes: 24ba613c9d6c ("ARM kprobes: core code") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-05-19ARM: 8771/1: kprobes: Prohibit kprobes on do_undefinstrMasami Hiramatsu1-1/+4
Prohibit kprobes on do_undefinstr because kprobes on arm is implemented by undefined instruction. This means if we probe do_undefinstr(), it can cause infinit recursive exception. Fixes: 24ba613c9d6c ("ARM kprobes: core code") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-05-19ARM: 8770/1: kprobes: Prohibit probing on optimized_callbackMasami Hiramatsu1-0/+1
Prohibit probing on optimized_callback() because it is called from kprobes itself. If we put a kprobes on it, that will cause a recursive call loop. Mark it NOKPROBE_SYMBOL. Fixes: 0dc016dbd820 ("ARM: kprobes: enable OPTPROBES for ARM 32") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-05-19ARM: 8769/1: kprobes: Fix to use get_kprobe_ctlblk after irq-disabedMasami Hiramatsu1-1/+2
Since get_kprobe_ctlblk() uses smp_processor_id() to access per-cpu variable, it hits smp_processor_id sanity check as below. [ 7.006928] BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 [ 7.007859] caller is debug_smp_processor_id+0x20/0x24 [ 7.008438] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1-00192-g4eb17253e4b5 #1 [ 7.008890] Hardware name: Generic DT based system [ 7.009917] [<c0313f0c>] (unwind_backtrace) from [<c030e6d8>] (show_stack+0x20/0x24) [ 7.010473] [<c030e6d8>] (show_stack) from [<c0c64694>] (dump_stack+0x84/0x98) [ 7.010990] [<c0c64694>] (dump_stack) from [<c071ca5c>] (check_preemption_disabled+0x138/0x13c) [ 7.011592] [<c071ca5c>] (check_preemption_disabled) from [<c071ca80>] (debug_smp_processor_id+0x20/0x24) [ 7.012214] [<c071ca80>] (debug_smp_processor_id) from [<c03335e0>] (optimized_callback+0x2c/0xe4) [ 7.013077] [<c03335e0>] (optimized_callback) from [<bf0021b0>] (0xbf0021b0) To fix this issue, call get_kprobe_ctlblk() right after irq-disabled since that disables preemption. Fixes: 0dc016dbd820 ("ARM: kprobes: enable OPTPROBES for ARM 32") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-05-19ARM: replace unnecessary perl with sed and the shell $(( )) operatorRussell King1-5/+3
You can build a kernel in a cross compiling environment that doesn't have perl in the $PATH. Commit 429f7a062e3b broke that for 32 bit ARM. Fix it. As reported by Stephen Rothwell, it appears that the symbols can be either part of the BSS section or absolute symbols depending on the binutils version. When they're an absolute symbol, the $(( )) operator errors out and the build fails. Fix this as well. Fixes: 429f7a062e3b ("ARM: decompressor: fix BSS size calculation") Reported-by: Rob Landley <rob@landley.net> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Rob Landley <rob@landley.net> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-05-19ARM: kexec: record parent context registers for non-crash CPUsRussell King1-1/+1
How we got to machine_crash_nonpanic_core() (iow, from an IPI, etc) is not interesting for debugging a crash. The more interesting context is the parent context prior to the IPI being received. Record the parent context register state rather than the register state in machine_crash_nonpanic_core(), which is more relevant to the failing condition. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-05-19ARM: kexec: fix kdump register saving on panic()Russell King1-12/+22
When a panic() occurs, the kexec code uses smp_send_stop() to stop the other CPUs, but this results in the CPU register state not being saved, and gdb is unable to inspect the state of other CPUs. Commit 0ee59413c967 ("x86/panic: replace smp_send_stop() with kdump friendly version in panic path") addressed the issue on x86, but ignored other architectures. Address the issue on ARM by splitting out the crash stop implementation to crash_smp_send_stop() and adding the necessary protection. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-05-19ARM: 8758/1: decompressor: restore r1 and r2 just before jumping to the kernelŁukasz Stelmach1-2/+2
The hypervisor setup before __enter_kernel destroys the value sotred in r1. The value needs to be restored just before the jump. Fixes: 6b52f7bdb888 ("ARM: hyp-stub: Use r1 for the soft-restart address") Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-05-19ARM: 8753/1: decompressor: add a missing parameter to the addruart macroŁukasz Stelmach1-8/+8
In commit 639da5ee374b ("ARM: add an extra temp register to the low level debugging addruart macro") an additional temporary register was added to the addruart macro, but the decompressor code wasn't updated. Fixes: 639da5ee374b ("ARM: add an extra temp register to the low level debugging addruart macro") Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-05-19x86/mm: Drop TS_COMPAT on 64-bit exec() syscallDmitry Safonov1-0/+1
The x86 mmap() code selects the mmap base for an allocation depending on the bitness of the syscall. For 64bit sycalls it select mm->mmap_base and for 32bit mm->mmap_compat_base. exec() calls mmap() which in turn uses in_compat_syscall() to check whether the mapping is for a 32bit or a 64bit task. The decision is made on the following criteria: ia32 child->thread.status & TS_COMPAT x32 child->pt_regs.orig_ax & __X32_SYSCALL_BIT ia64 !ia32 && !x32 __set_personality_x32() was dropping TS_COMPAT flag, but set_personality_64bit() has kept compat syscall flag making in_compat_syscall() return true during the first exec() syscall. Which in result has user-visible effects, mentioned by Alexey: 1) It breaks ASAN $ gcc -fsanitize=address wrap.c -o wrap-asan $ ./wrap32 ./wrap-asan true ==1217==Shadow memory range interleaves with an existing memory mapping. ASan cannot proceed correctly. ABORTING. ==1217==ASan shadow was supposed to be located in the [0x00007fff7000-0x10007fff7fff] range. ==1217==Process memory map follows: 0x000000400000-0x000000401000 /home/izbyshev/test/gcc/asan-exec-from-32bit/wrap-asan 0x000000600000-0x000000601000 /home/izbyshev/test/gcc/asan-exec-from-32bit/wrap-asan 0x000000601000-0x000000602000 /home/izbyshev/test/gcc/asan-exec-from-32bit/wrap-asan 0x0000f7dbd000-0x0000f7de2000 /lib64/ld-2.27.so 0x0000f7fe2000-0x0000f7fe3000 /lib64/ld-2.27.so 0x0000f7fe3000-0x0000f7fe4000 /lib64/ld-2.27.so 0x0000f7fe4000-0x0000f7fe5000 0x7fed9abff000-0x7fed9af54000 0x7fed9af54000-0x7fed9af6b000 /lib64/libgcc_s.so.1 [snip] 2) It doesn't seem to be great for security if an attacker always knows that ld.so is going to be mapped into the first 4GB in this case (the same thing happens for PIEs as well). The testcase: $ cat wrap.c int main(int argc, char *argv[]) { execvp(argv[1], &argv[1]); return 127; } $ gcc wrap.c -o wrap $ LD_SHOW_AUXV=1 ./wrap ./wrap true |& grep AT_BASE AT_BASE: 0x7f63b8309000 AT_BASE: 0x7faec143c000 AT_BASE: 0x7fbdb25fa000 $ gcc -m32 wrap.c -o wrap32 $ LD_SHOW_AUXV=1 ./wrap32 ./wrap true |& grep AT_BASE AT_BASE: 0xf7eff000 AT_BASE: 0xf7cee000 AT_BASE: 0x7f8b9774e000 Fixes: 1b028f784e8c ("x86/mm: Introduce mmap_compat_base() for 32-bit mmap()") Fixes: ada26481dfe6 ("x86/mm: Make in_compat_syscall() work during exec") Reported-by: Alexey Izbyshev <izbyshev@ispras.ru> Bisected-by: Alexander Monakov <amonakov@ispras.ru> Investigated-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Borislav Petkov <bp@suse.de> Cc: Alexander Monakov <amonakov@ispras.ru> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: stable@vger.kernel.org Cc: linux-mm@kvack.org Cc: Andy Lutomirski <luto@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: https://lkml.kernel.org/r/20180517233510.24996-1-dima@arista.com
2018-05-19objtool: Detect RIP-relative switch table references, part 2Josh Poimboeuf1-25/+12
With the following commit: fd35c88b7417 ("objtool: Support GCC 8 switch tables") I added a "can't find switch jump table" warning, to stop covering up silent failures if add_switch_table() can't find anything. That warning found yet another bug in the objtool switch table detection logic. For cases 1 and 2 (as described in the comments of find_switch_table()), the find_symbol_containing() check doesn't adjust the offset for RIP-relative switch jumps. Incidentally, this bug was already fixed for case 3 with: 6f5ec2993b1f ("objtool: Detect RIP-relative switch table references") However, that commit missed the fix for cases 1 and 2. The different cases are now starting to look more and more alike. So fix the bug by consolidating them into a single case, by checking the original dynamic jump instruction in the case 3 loop. This also simplifies the code and makes it more robust against future switch table detection issues -- of which I'm sure there will be many... Switch table detection has been the most fragile area of objtool, by far. I long for the day when we'll have a GCC plugin for annotating switch tables. Linus asked me to delay such a plugin due to the flakiness of the plugin infrastructure in older versions of GCC, so this rickety code is what we're stuck with for now. At least the code is now a little simpler than it was. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/f400541613d45689086329432f3095119ffbc328.1526674218.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-19efi/libstub/arm64: Handle randomized TEXT_OFFSETMark Rutland1-0/+10
When CONFIG_RANDOMIZE_TEXT_OFFSET=y, TEXT_OFFSET is an arbitrary multiple of PAGE_SIZE in the interval [0, 2MB). The EFI stub does not account for the potential misalignment of TEXT_OFFSET relative to EFI_KIMG_ALIGN, and produces a randomized physical offset which is always a round multiple of EFI_KIMG_ALIGN. This may result in statically allocated objects whose alignment exceeds PAGE_SIZE to appear misaligned in memory. This has been observed to result in spurious stack overflow reports and failure to make use of the IRQ stacks, and theoretically could result in a number of other issues. We can OR in the low bits of TEXT_OFFSET to ensure that we have the necessary offset (and hence preserve the misalignment of TEXT_OFFSET relative to EFI_KIMG_ALIGN), so let's do that. Reported-by: Kim Phillips <kim.phillips@arm.com> Tested-by: Kim Phillips <kim.phillips@arm.com> [ardb: clarify comment and commit log, drop unneeded parens] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 6f26b3671184c36d ("arm64: kaslr: increase randomization granularity") Link: http://lkml.kernel.org/r/20180518140841.9731-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-18Merge branch 'akpm' (patches from Andrew)Linus Torvalds11-15/+116
Merge misc fixes from Andrew Morton: "10 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: hfsplus: stop workqueue when fill_super() failed mm: don't allow deferred pages with NEED_PER_CPU_KM MAINTAINERS: add Q: entry to kselftest for patchwork project radix tree: fix multi-order iteration race radix tree test suite: multi-order iteration race radix tree test suite: add item_delete_rcu() radix tree test suite: fix compilation issue radix tree test suite: fix mapshift build target include/linux/mm.h: add new inline function vmf_error() lib/test_bitmap.c: fix bitmap optimisation tests to report errors correctly
2018-05-18Merge tag 'platform-drivers-x86-v4.17-3' of ↵Linus Torvalds1-1/+1
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fix from Darren Hart: "Remove the last of the "select DELL_SMBIOS" references in the Kconfig" * tag 'platform-drivers-x86-v4.17-3' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: DELL_WMI use depends on instead of select for DELL_SMBIOS
2018-05-18Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds2-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: - a modified revert of a patch that made new choices come out for a couple stm32 clk drivers that really always need to be there when that particular machine is compiled in - boot fix on i.MX for Stefan who noticed odd behavior from the critical flag patch that came in during the merge window * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: stm32: fix: stm32 clock drivers are not compiled by default clk: imx6ull: use OSC clock during AXI rate change
2018-05-18Merge branch 'i2c/for-current-fixed' of ↵Linus Torvalds6-8/+24
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "A bunch of driver bugfixes and a MAINTAINERS addition" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: add entry for STM32 I2C driver i2c: viperboard: return message count on master_xfer success i2c: pmcmsp: fix error return from master_xfer i2c: pmcmsp: return message count on master_xfer success i2c: designware: fix poll-after-enable regression eeprom: at24: fix retrieving the at24_chip_data structure i2c: core: ACPI: Log device not acking errors at dbg loglevel i2c: core: ACPI: Improve OpRegion read errors
2018-05-18hfsplus: stop workqueue when fill_super() failedTetsuo Handa1-0/+1
syzbot is reporting ODEBUG messages at hfsplus_fill_super() [1]. This is because hfsplus_fill_super() forgot to call cancel_delayed_work_sync(). As far as I can see, it is hfsplus_mark_mdb_dirty() from hfsplus_new_inode() in hfsplus_fill_super() that calls queue_delayed_work(). Therefore, I assume that hfsplus_new_inode() does not fail if queue_delayed_work() was called, and the out_put_hidden_dir label is the appropriate location to call cancel_delayed_work_sync(). [1] https://syzkaller.appspot.com/bug?id=a66f45e96fdbeb76b796bf46eb25ea878c42a6c9 Link: http://lkml.kernel.org/r/964a8b27-cd69-357c-fe78-76b066056201@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot <syzbot+4f2e5f086147d543ab03@syzkaller.appspotmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-18mm: don't allow deferred pages with NEED_PER_CPU_KMPavel Tatashin1-0/+1
It is unsafe to do virtual to physical translations before mm_init() is called if struct page is needed in order to determine the memory section number (see SECTION_IN_PAGE_FLAGS). This is because only in mm_init() we initialize struct pages for all the allocated memory when deferred struct pages are used. My recent fix in commit c9e97a1997 ("mm: initialize pages on demand during boot") exposed this problem, because it greatly reduced number of pages that are initialized before mm_init(), but the problem existed even before my fix, as Fengguang Wu found. Below is a more detailed explanation of the problem. We initialize struct pages in four places: 1. Early in boot a small set of struct pages is initialized to fill the first section, and lower zones. 2. During mm_init() we initialize "struct pages" for all the memory that is allocated, i.e reserved in memblock. 3. Using on-demand logic when pages are allocated after mm_init call (when memblock is finished) 4. After smp_init() when the rest free deferred pages are initialized. The problem occurs if we try to do va to phys translation of a memory between steps 1 and 2. Because we have not yet initialized struct pages for all the reserved pages, it is inherently unsafe to do va to phys if the translation itself requires access of "struct page" as in case of this combination: CONFIG_SPARSE && !CONFIG_SPARSE_VMEMMAP The following path exposes the problem: start_kernel() trap_init() setup_cpu_entry_areas() setup_cpu_entry_area(cpu) get_cpu_gdt_paddr(cpu) per_cpu_ptr_to_phys(addr) pcpu_addr_to_page(addr) virt_to_page(addr) pfn_to_page(__pa(addr) >> PAGE_SHIFT) We disable this path by not allowing NEED_PER_CPU_KM with deferred struct pages feature. The problems are discussed in these threads: http://lkml.kernel.org/r/20180418135300.inazvpxjxowogyge@wfg-t540p.sh.intel.com http://lkml.kernel.org/r/20180419013128.iurzouiqxvcnpbvz@wfg-t540p.sh.intel.com http://lkml.kernel.org/r/20180426202619.2768-1-pasha.tatashin@oracle.com Link: http://lkml.kernel.org/r/20180515175124.1770-1-pasha.tatashin@oracle.com Fixes: 3a80a7fa7989 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set") Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Dennis Zhou <dennisszhou@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-18MAINTAINERS: add Q: entry to kselftest for patchwork projectShuah Khan (Samsung OSG)1-0/+1
A new patchwork project is created to track kselftest patches. Update the kselftest entry in the MAINTAINERS file adding 'Q:' entry: https://patchwork.kernel.org/project/linux-kselftest/list/ Link: http://lkml.kernel.org/r/20180515164427.12201-1-shuah@kernel.org Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-18radix tree: fix multi-order iteration raceRoss Zwisler1-4/+2
Fix a race in the multi-order iteration code which causes the kernel to hit a GP fault. This was first seen with a production v4.15 based kernel (4.15.6-300.fc27.x86_64) utilizing a DAX workload which used order 9 PMD DAX entries. The race has to do with how we tear down multi-order sibling entries when we are removing an item from the tree. Remember for example that an order 2 entry looks like this: struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling] where 'entry' is in some slot in the struct radix_tree_node, and the three slots following 'entry' contain sibling pointers which point back to 'entry.' When we delete 'entry' from the tree, we call : radix_tree_delete() radix_tree_delete_item() __radix_tree_delete() replace_slot() replace_slot() first removes the siblings in order from the first to the last, then at then replaces 'entry' with NULL. This means that for a brief period of time we end up with one or more of the siblings removed, so: struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling] This causes an issue if you have a reader iterating over the slots in the tree via radix_tree_for_each_slot() while only under rcu_read_lock()/rcu_read_unlock() protection. This is a common case in mm/filemap.c. The issue is that when __radix_tree_next_slot() => skip_siblings() tries to skip over the sibling entries in the slots, it currently does so with an exact match on the slot directly preceding our current slot. Normally this works: V preceding slot struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling] ^ current slot This lets you find the first sibling, and you skip them all in order. But in the case where one of the siblings is NULL, that slot is skipped and then our sibling detection is interrupted: V preceding slot struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling] ^ current slot This means that the sibling pointers aren't recognized since they point all the way back to 'entry', so we think that they are normal internal radix tree pointers. This causes us to think we need to walk down to a struct radix_tree_node starting at the address of 'entry'. In a real running kernel this will crash the thread with a GP fault when you try and dereference the slots in your broken node starting at 'entry'. We fix this race by fixing the way that skip_siblings() detects sibling nodes. Instead of testing against the preceding slot we instead look for siblings via is_sibling_entry() which compares against the position of the struct radix_tree_node.slots[] array. This ensures that sibling entries are properly identified, even if they are no longer contiguous with the 'entry' they point to. Link: http://lkml.kernel.org/r/20180503192430.7582-6-ross.zwisler@linux.intel.com Fixes: 148deab223b2 ("radix-tree: improve multiorder iterators") Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: CR, Sapthagirish <sapthagirish.cr@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-18radix tree test suite: multi-order iteration raceRoss Zwisler2-0/+64
Add a test which shows a race in the multi-order iteration code. This test reliably hits the race in under a second on my machine, and is the result of a real bug report against kernel a production v4.15 based kernel (4.15.6-300.fc27.x86_64). With a real kernel this issue is hit when using order 9 PMD DAX radix tree entries. The race has to do with how we tear down multi-order sibling entries when we are removing an item from the tree. Remember that an order 2 entry looks like this: struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling] where 'entry' is in some slot in the struct radix_tree_node, and the three slots following 'entry' contain sibling pointers which point back to 'entry.' When we delete 'entry' from the tree, we call : radix_tree_delete() radix_tree_delete_item() __radix_tree_delete() replace_slot() replace_slot() first removes the siblings in order from the first to the last, then at then replaces 'entry' with NULL. This means that for a brief period of time we end up with one or more of the siblings removed, so: struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling] This causes an issue if you have a reader iterating over the slots in the tree via radix_tree_for_each_slot() while only under rcu_read_lock()/rcu_read_unlock() protection. This is a common case in mm/filemap.c. The issue is that when __radix_tree_next_slot() => skip_siblings() tries to skip over the sibling entries in the slots, it currently does so with an exact match on the slot directly preceding our current slot. Normally this works: V preceding slot struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling] ^ current slot This lets you find the first sibling, and you skip them all in order. But in the case where one of the siblings is NULL, that slot is skipped and then our sibling detection is interrupted: V preceding slot struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling] ^ current slot This means that the sibling pointers aren't recognized since they point all the way back to 'entry', so we think that they are normal internal radix tree pointers. This causes us to think we need to walk down to a struct radix_tree_node starting at the address of 'entry'. In a real running kernel this will crash the thread with a GP fault when you try and dereference the slots in your broken node starting at 'entry'. In the radix tree test suite this will be caught by the address sanitizer: ==27063==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x60c0008ae400 at pc 0x00000040ce4f bp 0x7fa89b8fcad0 sp 0x7fa89b8fcac0 READ of size 8 at 0x60c0008ae400 thread T3 #0 0x40ce4e in __radix_tree_next_slot /home/rzwisler/project/linux/tools/testing/radix-tree/radix-tree.c:1660 #1 0x4022cc in radix_tree_next_slot linux/../../../../include/linux/radix-tree.h:567 #2 0x4022cc in iterator_func /home/rzwisler/project/linux/tools/testing/radix-tree/multiorder.c:655 #3 0x7fa8a088d50a in start_thread (/lib64/libpthread.so.0+0x750a) #4 0x7fa8a03bd16e in clone (/lib64/libc.so.6+0xf516e) Link: http://lkml.kernel.org/r/20180503192430.7582-5-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: CR, Sapthagirish <sapthagirish.cr@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-18radix tree test suite: add item_delete_rcu()Ross Zwisler2-0/+21
Currently the lifetime of "struct item" entries in the radix tree are not controlled by RCU, but are instead deleted inline as they are removed from the tree. In the following patches we add a test which has threads iterating over items pulled from the tree and verifying them in an rcu_read_lock()/rcu_read_unlock() section. This means that though an item has been removed from the tree it could still be being worked on by other threads until the RCU grace period expires. So, we need to actually free the "struct item" structures at the end of the grace period, just as we do with "struct radix_tree_node" items. Link: http://lkml.kernel.org/r/20180503192430.7582-4-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: CR, Sapthagirish <sapthagirish.cr@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-18radix tree test suite: fix compilation issueRoss Zwisler1-1/+2
Pulled from a patch from Matthew Wilcox entitled "xarray: Add definition of struct xarray": > From: Matthew Wilcox <mawilcox@microsoft.com> > Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> https://patchwork.kernel.org/patch/10341249/ These defines fix this compilation error: In file included from ./linux/radix-tree.h:6:0, from ./linux/../../../../include/linux/idr.h:15, from ./linux/idr.h:1, from idr.c:4: ./linux/../../../../include/linux/idr.h: In function `idr_init_base': ./linux/../../../../include/linux/radix-tree.h:129:2: warning: implicit declaration of function `spin_lock_init'; did you mean `spinlock_t'? [-Wimplicit-function-declaration] spin_lock_init(&(root)->xa_lock); \ ^ ./linux/../../../../include/linux/idr.h:126:2: note: in expansion of macro `INIT_RADIX_TREE' INIT_RADIX_TREE(&idr->idr_rt, IDR_RT_MARKER); ^~~~~~~~~~~~~~~ by providing a spin_lock_init() wrapper for the v4.17-rc* version of the radix tree test suite. Link: http://lkml.kernel.org/r/20180503192430.7582-3-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: CR, Sapthagirish <sapthagirish.cr@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-18radix tree test suite: fix mapshift build targetRoss Zwisler1-4/+2
Commit c6ce3e2fe3da ("radix tree test suite: Add config option for map shift") introduced a phony makefile target called 'mapshift' that ends up generating the file generated/map-shift.h. This phony target was then added as a dependency of the top level 'targets' build target, which is what is run when you go to tools/testing/radix-tree and just type 'make'. Unfortunately, this phony target doesn't actually work as a dependency, so you end up getting: $ make make: *** No rule to make target 'generated/map-shift.h', needed by 'main.o'. Stop. make: *** Waiting for unfinished jobs.... Fix this by making the file generated/map-shift.h our real makefile target, and add this a dependency of the top level build target. Link: http://lkml.kernel.org/r/20180503192430.7582-2-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: CR, Sapthagirish <sapthagirish.cr@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-18include/linux/mm.h: add new inline function vmf_error()Souptick Joarder1-0/+7
Many places in drivers/ file systems, error was handled in a common way like below: ret = (ret == -ENOMEM) ? VM_FAULT_OOM : VM_FAULT_SIGBUS; vmf_error() will replace this and return vm_fault_t type err. A lot of drivers and filesystems currently have a rather complex mapping of errno-to-VM_FAULT code. We have been able to eliminate a lot of it by just returning VM_FAULT codes directly from functions which are called exclusively from the fault handling path. Some functions can be called both from the fault handler and other context which are expecting an errno, so they have to continue to return an errno. Some users still need to choose different behaviour for different errnos, but vmf_error() captures the essential error translation that's common to all users, and those that need to handle additional errors can handle them first. Link: http://lkml.kernel.org/r/20180510174826.GA14268@jordon-HP-15-Notebook-PC Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-18lib/test_bitmap.c: fix bitmap optimisation tests to report errors correctlyMatthew Wilcox1-6/+15
I had neglected to increment the error counter when the tests failed, which made the tests noisy when they fail, but not actually return an error code. Link: http://lkml.kernel.org/r/20180509114328.9887-1-mpe@ellerman.id.au Fixes: 3cc78125a081 ("lib/test_bitmap.c: add optimisation tests") Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Yury Norov <ynorov@caviumnetworks.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <stable@vger.kernel.org> [4.13+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-18platform/x86: DELL_WMI use depends on instead of select for DELL_SMBIOSDarren Hart1-1/+1
If DELL_WMI "select"s DELL_SMBIOS, the DELL_SMBIOS dependencies are ignored and it is still possible to end up with unmet direct dependencies. Change the select to a depends on. Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-05-18Merge tag 'powerpc-4.17-6' of ↵Linus Torvalds5-2/+43
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Just three commits. The two cxl ones are not fixes per se, but they modify code that was added this cycle so that it will work with a recent firmware change. And then a fix for a recent commit that added sleeps in the NVRAM code, which needs to be more careful and not sleep if eg. we're called in the panic() path. Thanks to Nicholas Piggin, Philippe Bergheaud, Christophe Lombard" * tag 'powerpc-4.17-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv: Fix NVRAM sleep in invalid context when crashing cxl: Report the tunneled operations status cxl: Set the PBCQ Tunnel BAR register when enabling capi mode
2018-05-18Merge tag 'acpi-4.17-rc6' of ↵Linus Torvalds3-20/+74
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix an ACPICA regression introduced in this cycle and related to the handling of package objects loaded by the Load and loadTable AML operators that are not initialized properly after recent changes (Bob Moore)" * tag 'acpi-4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Add deferred package support for the Load and loadTable operators
2018-05-18Merge tag 'pm-4.17-rc6' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix Kconfig dependencies of the armada-37xx cpufreq driver (Miquel Raynal)" * tag 'pm-4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: armada-37xx: driver relies on cpufreq-dt
2018-05-18Merge tag 'usb-4.17-rc6' of ↵Linus Torvalds7-44/+145
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB driver fixes fro 4.17-rc6. They resolve some reported bugs in the musb driver, the xhci driver, and a number of small fixes for the usbip driver. All of these have been in linux-next with no reported issues" * tag 'usb-4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usbip: usbip_host: fix bad unlock balance during stub_probe() usbip: usbip_host: fix NULL-ptr deref and use-after-free errors usbip: usbip_host: run rebind from exit when module is removed usbip: usbip_host: delete device from busid_table after rebind usbip: usbip_host: refine probe and disconnect debug msgs to be useful usb: musb: fix remote wakeup racing with suspend xhci: Fix USB3 NULL pointer dereference at logical disconnect.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 23:23:15 +0000