summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-02-20ata: libata-scsi: use *switch* statements to check SCSI command codesSergey Shtylyov1-7/+19
Replace strings of the *if* statements checking the SCSI command code with the *switch* statements that fit better here... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-20ata: libata-sff: refactor ata_sff_altstatus()Sergey Shtylyov1-26/+33
The driver's calls to ata_sff_altstatus() are mostly surrounded by some clumsy checks. Refactor ata_sff_altstatus() to include the repetitive checks and return a 'bool' result indicating if the alternate status register exists or not. While at it, further update the 'kernel-doc' comment -- the alternate status register has never been a part of the taskfile, despite what Jeff and co. think! :-) In ata_sff_lost_interrupt(), wrap the ata_sff_altstatus() call in a WARN_ON_ONCE() check to issue a warning if the device control register does not exist. And while at it, fix the strange argument indentation in the ata_port_warn() call following the call to ata_sff_altstatus(). Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-19ata: libata-sff: refactor ata_sff_set_devctl()Sergey Shtylyov1-15/+15
Commit 41dec29bcb05 ("libata: introduce sff_set_devctl() method") left some clumsy checks surrounding calls to ata_sff_set_devctl() which Jeff Garzik suggested to factor out... and I never followed up. :-( At last, refactor ata_sff_set_devctl() to include the repetitive checks and return a 'bool' result indicating if the device control register exists or not. While at it, further update the 'kernel-doc' comment -- the device control register has never been a part of the taskfile, despite what Jeff and co. think! :-) Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-19ata: libata-sff: make ata_resources_present() return 'bool'Sergey Shtylyov1-4/+4
ata_resources_present() returns 1 if the primary/secondary channel's PCI resources are present, 0 if not -- the 'bool' type fits somewhat better here than 'int'... Use the *= operator, while at it... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-19ata: pata_hpt3x2n: disable fast interrupts in prereset() methodSergey Shtylyov1-13/+10
The PIO/DMA mode setting function is hardly a good place for disabling the fast interrupts on a channel -- let's move that code to the driver's prereset() method instead. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-19ata: pata_hpt37x: disable fast interrupts in prereset() methodSergey Shtylyov1-26/+22
The PIO/DMA mode setting functions are hardly a good place for disabling the fast interrupts on a channel -- let's move that code to the driver's prereset() method instead. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-19ata: pata_hpt366: disable fast interrupts in prereset() methodSergey Shtylyov1-6/+7
The PIO/DMA mode setting function is hardly a good place for disabling the fast interrupts on a channel -- let's move that code to the driver's prereset() method instead. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-19ata: pata_mpc52xx: use GFP_KERNELJulia Lawall1-1/+1
Platform_driver probe functions aren't called with locks held and thus don't need GFP_ATOMIC. Use GFP_KERNEL instead. Problem found with Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-19ata: sata_rcar: drop unused #define'sSergey Shtylyov1-4/+0
This driver has never used the SH-Navi2G/ATAPI-ATA compatible taskfile registers (the driver uses the taskfile registers in another location anyway), so drop their #define's... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-19ata: pata_hpt366: check channel enable bitsSergey Shtylyov1-2/+40
HighPoint HPT36x chips did turn out to have the channel enable bits -- however, badly implemented. Make use of them, despite that is probably only going to burden the driver's code -- assuming both channels are always enabled by the HighPoint BIOS anyway... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-19ata: sata_rcar: make sata_rcar_ata_devchk() return 'bool'Sergey Shtylyov1-4/+3
sata_rcar_ata_devchk() returns 1 if a device is present, 0 if not -- the 'bool' type clearly fits better here than 'unsigned int'... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-19ata: pata_samsung_cf: make pata_s3c_devchk() return 'bool'Sergey Shtylyov1-4/+3
pata_s3c_devchk() returns 1 if a device is present, 0 if not -- the 'bool' type clearly fits better here than 'unsigned int'... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-19ata: libata-sff: make ata_devchk() return 'bool'Sergey Shtylyov1-3/+6
ata_devchk() returns 1 if a device is present, 0 if not -- the 'bool' type clearly fits better here than 'unsigned int'... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-19ata: pata_hpt3x2n: drop unused 'struct hpt_chip'Sergey Shtylyov1-5/+0
The driver has never used 'struct hpt_chip' -- drop its declaration. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-19ata: pata_hpt3x2n: drop unused HPT_PCI_FASTSergey Shtylyov1-1/+0
The driver has never used HPT_PCI_FAST -- drop it. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-19ata: pata_artop: use *switch* in atp8xx_fixup()Sergey Shtylyov1-5/+9
This driver uses a string of the *if* statements in atp8xx_fixup() where a *switch* statement would fit better... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-19ata: pata_artop: use *switch* in artop_init_one()Sergey Shtylyov1-8/+11
This driver uses a string of the *if* statements in artop_init_one() where the *switch* statement would fit better. While fixing this, refactor the 6280 code to e.g. avoid a compound statement inside the *case* section... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-19pata_hpt3x2n: fix writing to wrong register in hpt3x2n_bmdma_stop()Sergey Shtylyov1-2/+2
The driver's bmdma_stop() method writes to the wrong PCI config register (0x52 intead of 0x54) when trying to clear the state machine on secondary channel -- "luckily", the write falls on a read-only part of the primary channel MISC. control 3 register, so no collateral damage is done... Alan Cox fixed the HPT37x driver in commit 6929da4427b4 ("[PATCH] hpt37x: Two important bug fixes") but forgot to check the HPT3x2N driver which has the same bug. :-/ Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-19pata_hpt3x2n: check channel enable bitsSergey Shtylyov1-1/+8
The driver's prereset() method still doesn't check the channel enable bits. The bug was there for the entire time the driver has existed. :-/ Alan Cox fixed the HPT37x driver in commit b5bf24b94c65 ("[PATCH] hpt37x: Check the enablebits") but forgot to check the HPT3x2N driver which has the same bug. :-/ Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-19ata: libata: make ata_host_suspend() *void*Sergey Shtylyov16-53/+39
ata_host_suspend() always returns 0, so the result checks in many drivers look pointless. Let's make this function return *void* instead of *int*. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-03ata: libata: ata_{sff|std}_prereset() always return 0Sergey Shtylyov2-5/+4
ata_std_prereset() always returns 0, hence the check in ata_sff_prereset() is pointless and thus it also can return only 0 (however, we cannot change the prototypes of ata_{sff|std}_prereset() as they implement the driver's prereset() method). Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-03ata: ahci: Skip 200 ms debounce delay for Marvell 88SE9235Paul Menzel1-0/+2
The 200 ms delay before debouncing the PHY in `sata_link_resume()` is not needed for the Marvell 88SE9235. $ lspci -nn -s 0021:0e:00.0 0021:0e:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11) So, remove it using the board_ahci_no_debounce_delay board definition. Tested on IBM S822LC with current Linux 5.17-rc1: Currently, without this patch (with 200 ms delay), device probe for ata1 takes 485 ms: [ 3.358158] ata1: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3fe881000100 irq 39 [ 3.358175] ata2: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3fe881000180 irq 39 [ 3.358191] ata3: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3fe881000200 irq 39 [ 3.358207] ata4: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3fe881000280 irq 39 […] [ 3.677542] ata3: SATA link down (SStatus 0 SControl 300) [ 3.677719] ata4: SATA link down (SStatus 0 SControl 300) [ 3.839242] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.839828] ata2.00: ATA-10: ST1000NX0313 00LY266 00LY265IBM, BE33, max UDMA/133 [ 3.840029] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 3.841796] ata2.00: configured for UDMA/133 [ 3.843231] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.844083] ata1.00: ATA-10: ST1000NX0313 00LY266 00LY265IBM, BE33, max UDMA/133 [ 3.844313] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 3.846043] ata1.00: configured for UDMA/133 With this patch (no delay) device probe for ata1 takes 273 ms: [ 3.624259] ata1: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3f e881000100 irq 39 [ 3.624436] ata2: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3f e881000180 irq 39 [ 3.624452] ata3: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3f e881000200 irq 39 [ 3.624468] ata4: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3f e881000280 irq 39 […] [ 3.731966] ata3: SATA link down (SStatus 0 SControl 300) [ 3.732069] ata4: SATA link down (SStatus 0 SControl 300) [ 3.897448] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.897678] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.898140] ata1.00: ATA-10: ST1000NX0313 00LY266 00LY265IBM, BE33, max UDMA/133 [ 3.898175] ata2.00: ATA-10: ST1000NX0313 00LY266 00LY265IBM, BE33, max UDMA/133 [ 3.898287] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 3.898349] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 3.900070] ata1.00: configured for UDMA/133 [ 3.900166] ata2.00: configured for UDMA/133 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-02ata: libata-acpi: kill ata_acpi_on_suspend()Sergey Shtylyov3-29/+1
Since the commit c05e6ff035c1b25d17364a685432 ("libata-acpi: implement and use ata_acpi_init_gtm()") ata_acpi_on_suspend() just returns 0, so its call from ata_eh_handle_port_suspend() doesn't make sense anymore. Remove the function completely, at last... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-31ata: libata-scsi: Simplify scsi_XX_lba_len()Damien Le Moal1-34/+6
In scsi_10_lba_len() and scsi_16_lba_len() functions, use get_unaligned_bexx() to access a cdb LBA and length fields instead of hardcoding the byte retrieval. With these simplification, the functions can also be declared inline. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2022-01-31ata: libata-scsi: Simplify ata_scsi_mode_select_xlat()Damien Le Moal1-3/+3
Use get_unaligned_be16() instead of using hardcoded accesses to 16-bits big endian cdb fields. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2022-01-31ata: libata-scsi: Cleanup ata_get_xlat_func()Damien Le Moal1-1/+0
Remove the unnecessary "break" after the return statement in the MODE_SELECT/MODE_SELECT_10 case. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2022-01-31ata: pata_pdc202xx_old: make static read-only array pio_timing constColin Ian King1-1/+1
The static array pio_timing is read-only so it make sense to make it const. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-31ata: pata_atiixp: make static read-only arrays constColin Ian King1-2/+2
The static arrays pio_timings and mwdma_timings are read-only so it make sense to make them const. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-31ata: pata_platform: Make use of platform_get_mem_or_io()Lad Prabhakar1-12/+6
Make use of platform_get_mem_or_io() to simplify the code. While at it, drop use of unlikely() from pata_platform_probe() as it isn't a hotpath. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-30Linux 5.17-rc2v5.17-rc2Linus Torvalds1-1/+1
2022-01-30Merge tag 'irq_urgent_for_v5.17_rc2_p2' of ↵Linus Torvalds6-36/+121
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Borislav Petkov: - Drop an unused private data field in the AIC driver - Various fixes to the realtek-rtl driver - Make the GICv3 ITS driver compile again in !SMP configurations - Force reset of the GICv3 ITSs at probe time to avoid issues during kexec - Yet another kfree/bitmap_free conversion - Various DT updates (Renesas, SiFive) * tag 'irq_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: interrupt-controller: sifive,plic: Group interrupt tuples dt-bindings: interrupt-controller: sifive,plic: Fix number of interrupts dt-bindings: irqchip: renesas-irqc: Add R-Car V3U support irqchip/gic-v3-its: Reset each ITS's BASERn register before probe irqchip/gic-v3-its: Fix build for !SMP irqchip/loongson-pch-ms: Use bitmap_free() to free bitmap irqchip/realtek-rtl: Service all pending interrupts irqchip/realtek-rtl: Fix off-by-one in routing irqchip/realtek-rtl: Map control data to virq irqchip/apple-aic: Drop unused ipi_hwirq field
2022-01-30Merge tag 'perf_urgent_for_v5.17_rc2_p2' of ↵Linus Torvalds1-4/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - Prevent accesses to the per-CPU cgroup context list from another CPU except the one it belongs to, to avoid list corruption - Make sure parent events are always woken up to avoid indefinite hangs in the traced workload * tag 'perf_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix cgroup event list management perf: Always wake the parent event
2022-01-30Merge tag 'sched_urgent_for_v5.17_rc2_p2' of ↵Linus Torvalds1-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: "Make sure the membarrier-rseq fence commands are part of the reported set when querying membarrier(2) commands through MEMBARRIER_CMD_QUERY" * tag 'sched_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/membarrier: Fix membarrier-rseq fence command missing from query bitmask
2022-01-30Merge tag 'x86_urgent_for_v5.17_rc2' of ↵Linus Torvalds2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Add another Intel CPU model to the list of CPUs supporting the processor inventory unique number - Allow writing to MCE thresholding sysfs files again - a previous change had accidentally disabled it and no one noticed. Goes to show how much is this stuff used * tag 'x86_urgent_for_v5.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Add Xeon Icelake-D to list of CPUs that support PPIN x86/MCE/AMD: Allow thresholding interface updates after init
2022-01-30Merge branch 'akpm' (patches from Andrew)Linus Torvalds12-70/+91
Merge misc fixes from Andrew Morton: "12 patches. Subsystems affected by this patch series: sysctl, binfmt, ia64, mm (memory-failure, folios, kasan, and psi), selftests, and ocfs2" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: ocfs2: fix a deadlock when commit trans jbd2: export jbd2_journal_[grab|put]_journal_head psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n psi: fix "no previous prototype" warnings when CONFIG_CGROUPS=n mm, kasan: use compare-exchange operation to set KASAN page tag kasan: test: fix compatibility with FORTIFY_SOURCE tools/testing/scatterlist: add missing defines mm: page->mapping folio->mapping should have the same offset memory-failure: fetch compound_head after pgmap_pfn_valid() ia64: make IA64_MCA_RECOVERY bool instead of tristate binfmt_misc: fix crash when load/unload module include/linux/sysctl.h: fix register_sysctl_mount_point() return type
2022-01-30ocfs2: fix a deadlock when commit transJoseph Qi1-14/+11
commit 6f1b228529ae introduces a regression which can deadlock as follows: Task1: Task2: jbd2_journal_commit_transaction ocfs2_test_bg_bit_allocatable spin_lock(&jh->b_state_lock) jbd_lock_bh_journal_head __jbd2_journal_remove_checkpoint spin_lock(&jh->b_state_lock) jbd2_journal_put_journal_head jbd_lock_bh_journal_head Task1 and Task2 lock bh->b_state and jh->b_state_lock in different order, which finally result in a deadlock. So use jbd2_journal_[grab|put]_journal_head instead in ocfs2_test_bg_bit_allocatable() to fix it. Link: https://lkml.kernel.org/r/20220121071205.100648-3-joseph.qi@linux.alibaba.com Fixes: 6f1b228529ae ("ocfs2: fix race between searching chunks and release journal_head from buffer_head") Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reported-by: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com> Tested-by: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com> Reported-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-30jbd2: export jbd2_journal_[grab|put]_journal_headJoseph Qi1-0/+2
Patch series "ocfs2: fix a deadlock case". This fixes a deadlock case in ocfs2. We firstly export jbd2 symbols jbd2_journal_[grab|put]_journal_head as preparation and later use them in ocfs2 insread of jbd_[lock|unlock]_bh_journal_head to fix the deadlock. This patch (of 2): This exports symbols jbd2_journal_[grab|put]_journal_head, which will be used outside modules, e.g. ocfs2. Link: https://lkml.kernel.org/r/20220121071205.100648-2-joseph.qi@linux.alibaba.com Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com> Cc: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-30psi: fix "defined but not used" warnings when CONFIG_PROC_FS=nSuren Baghdasaryan1-38/+41
When CONFIG_PROC_FS is disabled psi code generates the following warnings: kernel/sched/psi.c:1364:30: warning: 'psi_cpu_proc_ops' defined but not used [-Wunused-const-variable=] 1364 | static const struct proc_ops psi_cpu_proc_ops = { | ^~~~~~~~~~~~~~~~ kernel/sched/psi.c:1355:30: warning: 'psi_memory_proc_ops' defined but not used [-Wunused-const-variable=] 1355 | static const struct proc_ops psi_memory_proc_ops = { | ^~~~~~~~~~~~~~~~~~~ kernel/sched/psi.c:1346:30: warning: 'psi_io_proc_ops' defined but not used [-Wunused-const-variable=] 1346 | static const struct proc_ops psi_io_proc_ops = { | ^~~~~~~~~~~~~~~ Make definitions of these structures and related functions conditional on CONFIG_PROC_FS config. Link: https://lkml.kernel.org/r/20220119223940.787748-3-surenb@google.com Fixes: 0e94682b73bf ("psi: introduce psi monitor") Signed-off-by: Suren Baghdasaryan <surenb@google.com> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-30psi: fix "no previous prototype" warnings when CONFIG_CGROUPS=nSuren Baghdasaryan1-6/+5
When CONFIG_CGROUPS is disabled psi code generates the following warnings: kernel/sched/psi.c:1112:21: warning: no previous prototype for 'psi_trigger_create' [-Wmissing-prototypes] 1112 | struct psi_trigger *psi_trigger_create(struct psi_group *group, | ^~~~~~~~~~~~~~~~~~ kernel/sched/psi.c:1182:6: warning: no previous prototype for 'psi_trigger_destroy' [-Wmissing-prototypes] 1182 | void psi_trigger_destroy(struct psi_trigger *t) | ^~~~~~~~~~~~~~~~~~~ kernel/sched/psi.c:1249:10: warning: no previous prototype for 'psi_trigger_poll' [-Wmissing-prototypes] 1249 | __poll_t psi_trigger_poll(void **trigger_ptr, | ^~~~~~~~~~~~~~~~ Change the declarations of these functions in the header to provide the prototypes even when they are unused. Link: https://lkml.kernel.org/r/20220119223940.787748-2-surenb@google.com Fixes: 0e94682b73bf ("psi: introduce psi monitor") Signed-off-by: Suren Baghdasaryan <surenb@google.com> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-30mm, kasan: use compare-exchange operation to set KASAN page tagPeter Collingbourne1-5/+12
It has been reported that the tag setting operation on newly-allocated pages can cause the page flags to be corrupted when performed concurrently with other flag updates as a result of the use of non-atomic operations. Fix the problem by using a compare-exchange loop to update the tag. Link: https://lkml.kernel.org/r/20220120020148.1632253-1-pcc@google.com Link: https://linux-review.googlesource.com/id/I456b24a2b9067d93968d43b4bb3351c0cec63101 Fixes: 2813b9c02962 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc") Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-30kasan: test: fix compatibility with FORTIFY_SOURCEMarco Elver1-0/+5
With CONFIG_FORTIFY_SOURCE enabled, string functions will also perform dynamic checks using __builtin_object_size(ptr), which when failed will panic the kernel. Because the KASAN test deliberately performs out-of-bounds operations, the kernel panics with FORTIFY_SOURCE, for example: | kernel BUG at lib/string_helpers.c:910! | invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI | CPU: 1 PID: 137 Comm: kunit_try_catch Tainted: G B 5.16.0-rc3+ #3 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 | RIP: 0010:fortify_panic+0x19/0x1b | ... | Call Trace: | kmalloc_oob_in_memset.cold+0x16/0x16 | ... Fix it by also hiding `ptr` from the optimizer, which will ensure that __builtin_object_size() does not return a valid size, preventing fortified string functions from panicking. Link: https://lkml.kernel.org/r/20220124160744.1244685-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reported-by: Nico Pache <npache@redhat.com> Reviewed-by: Nico Pache <npache@redhat.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-30tools/testing/scatterlist: add missing definesMaor Gottlieb1-1/+2
The cited commits replaced preemptible with pagefault_disabled and flush_kernel_dcache_page with flush_dcache_page respectively, hence need to update the corresponding defines in the test. scatterlist.c: In function ‘sg_miter_stop’: scatterlist.c:919:4: warning: implicit declaration of function ‘flush_dcache_page’ [-Wimplicit-function-declaration] flush_dcache_page(miter->page); ^~~~~~~~~~~~~~~~~ In file included from linux/scatterlist.h:8:0, from scatterlist.c:9: scatterlist.c:922:18: warning: implicit declaration of function ‘pagefault_disabled’ [-Wimplicit-function-declaration] WARN_ON_ONCE(!pagefault_disabled()); ^ linux/mm.h:23:25: note: in definition of macro ‘WARN_ON_ONCE’ int __ret_warn_on = !!(condition); \ ^~~~~~~~~ Link: https://lkml.kernel.org/r/20220118082105.1737320-1-maorg@nvidia.com Fixes: 723aca208516 ("mm/scatterlist: replace the !preemptible warning in sg_miter_stop()") Fixes: 0e84f5dbf8d6 ("scatterlist: replace flush_kernel_dcache_page with flush_dcache_page") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-30mm: page->mapping folio->mapping should have the same offsetWei Yang1-0/+1
As with the other members of folio, the offset of page->mapping and folio->mapping must be the same. The compile-time check was inadvertently removed during development. Add it back. [willy@infradead.org: changelog redo] Link: https://lkml.kernel.org/r/20220104011734.21714-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-30memory-failure: fetch compound_head after pgmap_pfn_valid()Joao Martins1-0/+6
memory_failure_dev_pagemap() at the moment assumes base pages (e.g. dax_lock_page()). For devmap with compound pages fetch the compound_head in case a tail page memory failure is being handled. Currently this is a nop, but in the advent of compound pages in dev_pagemap it allows memory_failure_dev_pagemap() to keep working. Without this fix memory-failure handling (i.e. MCEs on pmem) with device-dax configured namespaces will regress (and crash). Link: https://lkml.kernel.org/r/20211202204422.26777-2-joao.m.martins@oracle.com Reported-by: Jane Chu <jane.chu@oracle.com> Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-30ia64: make IA64_MCA_RECOVERY bool instead of tristateRandy Dunlap1-1/+1
In linux-next, IA64_MCA_RECOVERY uses the (new) function make_task_dead(), which is not exported for use by modules. Instead of exporting it for one user, convert IA64_MCA_RECOVERY to be a bool Kconfig symbol. In a config file from "kernel test robot <lkp@intel.com>" for a different problem, this linker error was exposed when CONFIG_IA64_MCA_RECOVERY=m. Fixes this build error: ERROR: modpost: "make_task_dead" [arch/ia64/kernel/mca_recovery.ko] undefined! Link: https://lkml.kernel.org/r/20220124213129.29306-1-rdunlap@infradead.org Fixes: 0e25498f8cd4 ("exit: Add and use make_task_dead.") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-30binfmt_misc: fix crash when load/unload moduleTong Zhang1-4/+4
We should unregister the table upon module unload otherwise something horrible will happen when we load binfmt_misc module again. Also note that we should keep value returned by register_sysctl_mount_point() and release it later, otherwise it will leak. Also, per Christian's comment, to fully restore the old behavior that won't break userspace the check(binfmt_misc_header) should be eliminated. To reproduce: modprobe binfmt_misc modprobe -r binfmt_misc modprobe binfmt_misc modprobe -r binfmt_misc modprobe binfmt_misc resulting in modprobe: can't load module binfmt_misc (kernel/fs/binfmt_misc.ko): Cannot allocate memory and an unhappy kernel: binfmt_misc: Failed to create fs/binfmt_misc sysctl mount point binfmt_misc: Failed to create fs/binfmt_misc sysctl mount point BUG: unable to handle page fault for address: fffffbfff8004802 Call Trace: init_misc_binfmt+0x2d/0x1000 [binfmt_misc] Link: https://lkml.kernel.org/r/20220124181812.1869535-2-ztong0001@gmail.com Fixes: 3ba442d5331f ("fs: move binfmt_misc sysctl to its own file") Signed-off-by: Tong Zhang <ztong0001@gmail.com> Co-developed-by: Christian Brauner<brauner@kernel.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-30include/linux/sysctl.h: fix register_sysctl_mount_point() return typeAndrew Morton1-1/+1
The CONFIG_SYSCTL=n stub returns the wrong type. Fixes: ee9efac48a082 ("sysctl: add helper to register a sysctl mount point") Reported-by: kernel test robot <lkp@intel.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-29Merge tag 'irqchip-fixes-5.17-1' of ↵Thomas Gleixner6-36/+121
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Drop an unused private data field in the AIC driver - Various fixes to the realtek-rtl driver - Make the GICv3 ITS driver compile again in !SMP configurations - Force reset of the GICv3 ITSs at probe time to avoid issues during kexec - Yet another kfree/bitmap_free conversion - Various DT updates (Renesas, SiFive) Link: https://lore.kernel.org/r/20220128174217.517041-1-maz@kernel.org
2022-01-29Merge tag 'pci-v5.17-fixes-2' of ↵Linus Torvalds4-19/+9
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fixes from Bjorn Helgaas: - Fix compilation warnings in new mt7621 driver (Sergio Paracuellos) - Restore the sysfs "rom" file for VGA shadow ROMs, which was broken when converting "rom" to be a static attribute (Bjorn Helgaas) * tag 'pci-v5.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/sysfs: Find shadow ROM before static attribute initialization PCI: mt7621: Remove unused function pcie_rmw() PCI: mt7621: Drop of_match_ptr() to avoid unused variable
2022-01-29Merge tag 'gpio-fixes-for-v5.17-rc2' of ↵Linus Torvalds2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "Two fixes for the gpio-simulator: - fix a bug with hogs not being set-up in gpio-sim when user-space sets the chip label to an empty string - include the gpio-sim documentation in the index" * tag 'gpio-fixes-for-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: sim: add doc file to index file gpio: sim: check the label length when setting up device properties
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 17:03:54 +0000