summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-06-06[media] rcar-vin: use pad information when verifying media bus formatNiklas Söderlund1-0/+1
Use information about pad index when enumerating mbus codes. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] rcar-vin: move pad lookup to async bound handlerNiklas Söderlund2-23/+29
Information about pads will be needed when enumerating the media bus codes in the async complete handler which is run before rvin_v4l2_probe(). Move the pad lookup to the async bound handler so they are available when needed. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> [hans.verkuil@cisco.com: fix typo: surce -> source] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] rcar-vin: refactor pad lookup codeNiklas Söderlund1-15/+21
The pad lookup code can be broken out to increase readability and to reduce code duplication. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] rcar-vin: move subdev source and sink pad index to rvin_graph_entityNiklas Söderlund2-14/+15
It makes more sense to store the sink and source pads in struct rvin_graph_entity since that contains other subdevice related information. The data type to store pad information in is unsigned int and not int, change this. While we are at it drop the _idx suffix from the names, this never made sense. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] rcar-vin: fix standard in input enumerationNiklas Söderlund1-2/+6
The driver supports a single input only, which can be either analog or digital. If the subdevice supports dv_timings_cap the input is digital and the driver should not fill in the standard. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] rcar-vin: fix how pads are handled for v4l2 subdevice operationsNiklas Söderlund1-12/+14
The rcar-vin driver only uses one pad, pad number 0. - All v4l2 operations that did not check that the requested operation was for pad 0 have been updated with a check to enforce this. - All v4l2 operations that stored (and later restored) the requested pad before substituting it for the subdevice pad number have been updated to not store the incoming pad and simply restore it to 0 after the subdevice operation is complete. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] rcar-vin: use rvin_reset_format() in S_DV_TIMINGSNiklas Söderlund1-6/+2
Use rvin_reset_format() in rvin_s_dv_timings() instead of just resetting a few fields. This fixes an issue where the field format was not properly set after S_DV_TIMINGS. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] rcar-vin: reset bytesperline and sizeimage when resetting formatNiklas Söderlund1-0/+3
These two were forgotten when refactoring the format reset code. If they are not also reset at the same time as width and height the format returned from G_FMT will not match reality. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] v4l: Remove V4L2 OF framework in favour of V4L2 fwnode frameworkSakari Ailus3-458/+0
All drivers have been converted from V4L2 OF to V4L2 fwnode. The V4L2 OF framework is now unused. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] docs-rst: media: Switch documentation to V4L2 fwnode APISakari Ailus3-4/+4
Instead of including the V4L2 OF header in ReST documentation, use the V4L2 fwnode header instead. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] v4l: Switch from V4L2 OF not V4L2 fwnode APISakari Ailus35-175/+212
Switch users of the v4l2_of_ APIs to the more generic v4l2_fwnode_ APIs. Async OF matching is replaced by fwnode matching and OF matching support is removed. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Benoit Parrot <bparrot@ti.com> # i2c/ov2569.c, am437x/am437x-vpfe.c and ti-vpe/cal.c Tested-by: Hans Verkuil <hans.verkuil@cisco.com> # Atmel sama5d3 board + ov2640 sensor Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] v4l: flash led class: Use fwnode_handle instead of device_node in initSakari Ailus4-13/+15
Pass the more generic fwnode_handle to the init function than the device_node. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] v4l: async: Add fwnode match supportSakari Ailus3-0/+23
Add fwnode matching to complement OF node matching. And fwnode may also be an OF node. Do not enable fwnode matching yet. It will replace OF matching soon. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] v4l: fwnode: Support generic fwnode for parsing standardised propertiesSakari Ailus4-0/+453
The fwnode_handle is a more generic way than OF device_node to describe firmware nodes. Instead of the OF API, use more generic fwnode API to obtain the same information. As the V4L2 fwnode support will be required by a small minority of e.g. ACPI based systems (the same might actually go for OF), make this a module instead of embedding it in the videodev module. The origins of the V4L2 fwnode framework is in the V4L2 OF framework. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] staging: remove todo and replace with lirc_zilog todoSean Young2-48/+35
The lirc_zilog driver is the last remaining lirc driver, so the existing todo is no longer relevant. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] sir_ir: remove init_chrdev and init_sir_ir functionsSean Young1-36/+22
Inlining these functions into the probe function makes it much more readable. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] sir_ir: remove init_port and drop_port functionsSean Young1-22/+5
These functions are too short and removing them makes the code more readable. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] sir_ir: use dev managed resourcesSean Young1-6/+3
Several error paths do not free up resources. This simplifies the code and fixes this. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] sir_ir: attempt to free already free_irqSean Young1-2/+2
If the probe fails (e.g. port already in use), rmmod causes null deref. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] lirc_zilog: Fix unbalanced braces around if/elseRicardo Silva1-4/+6
Fix all checkpatch reported issues for: * CHECK: "braces {} should be used on all arms of this statement". * CHECK: "Unbalanced braces around else statement". Make sure all if/else statements are balanced in terms of braces. Most cases in code are, but a few were left unbalanced, so put them all consistent with the recommended style. Signed-off-by: Ricardo Silva <rjpdasilva@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] lirc_zilog: Use sizeof(*p) instead of sizeof(struct P)Ricardo Silva1-3/+3
Fix all checkpatch reported issues for "CHECK: Prefer kzalloc(sizeof(*<p>)...) over kzalloc(sizeof(struct <P>)...)". Other similar case in the code already using recommended style, so make it all consistent with the recommended practice. Signed-off-by: Ricardo Silva <rjpdasilva@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] lirc_zilog: Use __func__ for logging function nameRicardo Silva1-4/+5
Fix all checkpatch reported issues for "CHECK: Prefer using '"%s...", __func__' to using '<func_name>', ..." Use recommended style. Additionally, __func__ was already used in similar cases throughout the code, so make it all consistent. Signed-off-by: Ricardo Silva <rjpdasilva@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] lirc_zilog: Fix NULL comparisons styleRicardo Silva1-24/+24
Fix all checkpatch reported issues for "CHECK: Comparison to NULL could be written...". Do these comparisons using the recommended coding style and consistent with other similar cases in the file, which already used the recommended way. Signed-off-by: Ricardo Silva <rjpdasilva@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] lirc_zilog: Fix whitespace style checksRicardo Silva1-18/+17
Fix style issues reported by checkpatch, affecting whitespace only: * CHECK: "Please don't use multiple blank lines". Two of these still triggering and left untouched because used for separating logical blocks (vars from functions, etc.). * CHECK: "spaces preferred around that '<operator>'". All fixed. * CHECK: "Alignment should match open parenthesis". All fixed except one on line 1161, left untouched for readability. Move towards recommended coding style without compromising readability. Signed-off-by: Ricardo Silva <rjpdasilva@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] tm6000: key_addr is unusedDavid Härdeman1-4/+0
The key_addr member is only assigned, never used. So, remove it. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] rc-core: cx231xx - leave the internals of rc_dev aloneDavid Härdeman1-3/+2
Just some debug statements to change. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] rc-core: img-ir - leave the internals of rc_dev aloneDavid Härdeman1-4/+0
Changing the protocol does not imply that the keymap changes. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] rc-core: ati_remote - leave the internals of rc_dev aloneDavid Härdeman1-3/+0
The REP_DELAY setting on the input device is independent of hardware. This change should not change how to driver works (as it does a keydown/keyup and has no real repeat handling). Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] lirc_dev: cleanup headerDavid Härdeman1-7/+0
Remove some stuff from lirc_dev.h which is not used anywhere. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] lirc_dev: cleanup includesDavid Härdeman1-9/+1
Remove superfluous includes and defines. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] lirc_dev: return POLLHUP and POLLERR when device is goneDavid Härdeman1-1/+1
Most drivers return both values when the device is gone. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] lirc_dev: remove unused module parameterDavid Härdeman1-5/+0
The "debug" parameter isn't actually used anywhere. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] lirc_dev: remove superfluous get/put_device() callsDavid Härdeman1-4/+0
device_add() and friends already manage the references to the parent device so these calls aren't necessary. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] lirc_dev: remove lirc_irctl_init() and lirc_cdev_add()David Härdeman1-32/+12
These two functions only make the logic in lirc_register_driver() harder to follow. (Note that almost no other driver calls kobject_set_name() on their cdev so I simply removed that part). Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] lirc_zilog: remove module parameter minorDavid Härdeman1-10/+6
Always let the kernel decide what minor the lirc chardev gets. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] lirc_dev: merge lirc_register_driver() and lirc_allocate_driver()David Härdeman1-28/+13
Merging the two means that lirc_allocate_buffer() is called before device_add() and cdev_add() which makes more sense. This also simplifies the locking slightly because lirc_allocate_buffer() will always be called with lirc_dev_lock held. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] lirc_dev: make fops mandatoryDavid Härdeman2-39/+5
Every caller of lirc_register_driver() passes their own fops and there are no users of lirc_dev_fop_write() in the kernel tree. Thus we can make fops mandatory and remove lirc_dev_fop_write(). Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] lirc_dev: clarify error handlingDavid Härdeman1-3/+3
out_sysfs is misleading, sysfs only comes into play after device_add(). Also, calling device_init() before the rest of struct dev is filled out is clearer. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] lirc_dev: remove sampling kthreadDavid Härdeman3-109/+2
There are no drivers which use this functionality. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] lirc_dev: remove unused set_use_inc/set_use_decDavid Härdeman3-26/+6
Since there are no users of this functionality, it can be removed altogether. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] lirc_dev: remove pointless functionsDavid Härdeman2-23/+2
drv->set_use_inc and drv->set_use_dec are already optional so we can remove all dummy functions. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] mceusb: TX -EPIPE (urb status = -32) lockup fixA Sun1-19/+34
Once IR blasting or mceusb device commands fail with mce_async_callback() TX -EPIPE error, all subsequent TX to device then fail with the same error. ... [ 249.986174] mceusb 1-1.2:1.0: requesting 38000 HZ carrier [ 249.986210] mceusb 1-1.2:1.0: send request called (size=0x4) [ 249.986256] mceusb 1-1.2:1.0: send request complete (res=0) [ 249.986403] mceusb 1-1.2:1.0: Error: request urb status = -32 (TX HALT) [ 249.999885] mceusb 1-1.2:1.0: send request called (size=0x3) [ 249.999929] mceusb 1-1.2:1.0: send request complete (res=0) [ 250.000013] mceusb 1-1.2:1.0: Error: request urb status = -32 (TX HALT) [ 250.019830] mceusb 1-1.2:1.0: send request called (size=0x21) [ 250.019868] mceusb 1-1.2:1.0: send request complete (res=0) [ 250.020007] mceusb 1-1.2:1.0: Error: request urb status = -32 (TX HALT) ... Fault simulation/injection is by executing the following USB operation in a mceusb instrumented driver, prior to TX I/O. retval = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), USB_REQ_SET_FEATURE, USB_RECIP_ENDPOINT, USB_ENDPOINT_HALT, usb_pipeendpoint(ir->pipe_out), NULL, 0, USB_CTRL_SET_TIMEOUT); dev_dbg(ir->dev, "set halt retval, %d", retval); After setting halt state for the TX endpoint, perform an lirc "irsend" to generate TX traffic to device. After the TX HALT, the patch restores subsequent TX to working state. ... [ 508.009638] mceusb 1-1.2:1.0: send request called (size=0x3) [ 508.009697] mceusb 1-1.2:1.0: send request complete (res=0) [ 508.009847] mce_async_callback() [ 508.009864] mceusb 1-1.2:1.0: Error: request urb status = -32 (TX HALT) [ 508.009890] mceusb 1-1.2:1.0: kevent 0 scheduled [ 508.021552] mceusb 1-1.2:1.0: send request called (size=0x21) [ 508.021598] mceusb 1-1.2:1.0: send request complete (res=0) [ 508.021963] mce_async_callback() [ 508.021981] mceusb 1-1.2:1.0: tx data: 84 b0 0c 8c 0c 84 8c 0c 8c 0c 84 8c 0c 8c 0c 84 98 0c 98 0c 84 98 0c 8c 0c 84 8c 0c 8c 0c 81 8c 80 (length=33) [ 508.021997] mceusb 1-1.2:1.0: Raw IR data, 0 pulse/space samples [ 508.066627] mceusb 1-1.2:1.0: send request called (size=0x3) [ 508.066669] mceusb 1-1.2:1.0: send request complete (res=0) [ 508.066841] mce_async_callback() [ 508.066858] mceusb 1-1.2:1.0: tx data: 9f 08 03 (length=3) ... Signed-off-by: A Sun <as1033x@comcast.net> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] mceusb: RX -EPIPE (urb status = -32) lockup failure fixA Sun1-1/+73
RX -EPIPE failure with infinite loop and flooding of [ 2851.966506] mceusb 1-1.2:1.0: Error: urb status = -32 log message at 8000 messages per second. Bug trigger appears to be normal, but heavy, IR receiver use. Driver and Linux host become unusable after error. Also seen at https://sourceforge.net/p/lirc/mailman/message/34886165/ Fix: Message reports RX usb halt (stall) condition requiring usb_clear_halt() call in non-interrupt context to recover. Add driver workqueue call to perform this recovery based on method in use for the usbnet device driver. Signed-off-by: A Sun <as1033x@comcast.net> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] rc: meson-ir: switch config to NEC decoding on shutdownAlex Deryskyba1-0/+27
On the Amlogic SoCs, the bootloader firmware can handle the IR hardware in order to Wake up or Power back the system when in suspend on shutdown mode. This patch switches the hardware configuration in a state usable by the firmware to permit powering the system back. Some vendor bootloader firmware were modified to switch to this configuration but it may not be the case for all available products. This patch was originally posted at [1]. [1] https://github.com/LibreELEC/linux-amlogic/pull/27 Signed-off-by: Alex Deryskyba <alex@codesnake.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] rc: meson-ir: store raw event without processingJonas Karlman1-1/+1
This patch fixes meson-it driver by storing event without processing to avoid losing key pressed events when system is loaded and events are occurring too fast. This issue was reported at [1] [1] https://github.com/LibreELEC/linux-amlogic/pull/42 Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] rc: fix breakage in "make menuconfig" for media_buildDevin Heitmueller1-4/+4
The Kconfig format is strict enough where if the indentation isn't correct then the "make menuconfig" will break. Fix the indentation to match all the other entries. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] rc: meson-ir: change irq name to to of node nameHeiner Kallweit1-1/+1
Switch the interrupt description to the default which is the of node name. This is more in line with the interrupt descriptions in other meson drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] rc: meson-ir: use readl_relaxed in the interrupt handlerHeiner Kallweit1-3/+4
We don't need the memory barriers here and an interrupt handler should be as fast as possible. Therefore switch to readl_relaxed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] rc: meson-ir: switch to managed rc device allocation / registrationHeiner Kallweit1-14/+4
Switch to the managed versions of rc_allocate_device/rc_register_device, thus simplifying the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] rc: meson-ir: make use of the bitfield macrosHeiner Kallweit1-12/+12
Make use of the bitfield macros thus partially hiding the complexity of dealing with bitfields. The patch also includes a minor fix to REG0_RATE_MASK, so far it was set to bit 0..10, but according to the spec it's bit 0..11. [mchehab@s-opensource.com: readd REG1_MODE_SHIFT and REG2_MODE_SHIFT that got removed on the original patch, as this will be used on another patch] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-21 11:40:52 +0000