summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2007-02-20[PATCH] Convert highest_possible_processor_id to nr_cpu_idsChristoph Lameter5-29/+17
We frequently need the maximum number of possible processors in order to allocate arrays for all processors. So far this was done using highest_possible_processor_id(). However, we do need the number of processors not the highest id. Moreover the number was so far dynamically calculated on each invokation. The number of possible processors does not change when the system is running. We can therefore calculate that number once. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Frederik Deweerdt <frederik.deweerdt@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] Replace highest_possible_node_id() with nr_node_idsChristoph Lameter3-18/+25
highest_possible_node_id() is currently used to calculate the last possible node idso that the network subsystem can figure out how to size per node arrays. I think having the ability to determine the maximum amount of nodes in a system at runtime is useful but then we should name this entry correspondingly, it should return the number of node_ids, and the the value needs to be setup only once on bootup. The node_possible_map does not change after bootup. This patch introduces nr_node_ids and replaces the use of highest_possible_node_id(). nr_node_ids is calculated on bootup when the page allocators pagesets are initialized. [deweerdt@free.fr: fix oops] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Neil Brown <neilb@suse.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] mincore warning fixAndrew Morton1-1/+4
allnoconfig: mm/mincore.c: In function 'do_mincore': mm/mincore.c:122: warning: unused variable 'entry' Yet another entry in the why-macros-are-wrong encyclopedia. Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] fix mempolicy's check on a system with memory-less-nodeKAMEZAWA Hiroyuki1-4/+9
bind_zonelist() can create zero-length zonelist if there is a memory-less-node. This patch checks the length of zonelist. If length is 0, returns -EINVAL. tested on ia64/NUMA with memory-less-node. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] rework reserved major handlingAndrew Morton4-13/+19
Several people have reported failures in dynamic major device number handling due to the recent changes in there to avoid handing out the local/experimental majors. Rolf reports that this is due to a gcc-4.1.0 bug. The patch refactors that code a lot in an attempt to provoke the compiler into behaving. Cc: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] minix v3: fix superblock definitionAndries Brouwer1-2/+1
Somehow we got the layout of the v3 superblock wrong, which causes crashes due to overindexing of the buffer_head array in statfs on large fielsystems. Cc: "Cedric Augonnet" <cedric.augonnet@gmail.com> Cc: "Daniel Aragones" <danarag@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] xfs warning fixAndrew Morton1-1/+1
fs/xfs/linux-2.6/xfs_super.c:903: warning: 'noinline' attribute ignored Cc: David Chinner <dgc@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] Fix build errors if bitop functions are do {} while macrosRalf Baechle2-12/+12
If one of clear_bit, change_bit or set_bit is defined as a do { } while (0) function usage of these functions in parenthesis like (foo_bit(23, &var)) while be expaned to something like (do { ... } while (0)}). resulting in a build error. This patch removes the useless parenthesis. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds60-320/+425
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4165/1: S3C24XX: Select CONFIG_NO_IOPORT [ARM] Fix s3c2410 ALSA audio for typedef elimination [ARM] Fix ARM AACI ALSA driver [ARM] fix mach-at91 build breakage [ARM] Fix jornada720 build errors [ARM] Fix iop13xx build error [ARM] Fix build error caused by move of apm [ARM] 4223/1: ixdp2351 : Fix for a define error [ARM] 4187/1: iop: unify time implementation across iop32x, iop33x, and iop13xx [ARM] 4186/1: iop: remove cp6_enable/disable routines [ARM] 4185/2: entry: introduce get_irqnr_preamble and arch_ret_to_user
2007-02-20Merge ARM fixesRussell King5239-121129/+241864
2007-02-20Merge branch 'upstream-linus' of ↵Linus Torvalds27-260/+264
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (21 commits) natsemi: Support Aculab E1/T1 PMXc cPCI carrier cards natsemi: Add support for using MII port with no PHY skge: race with workq and RTNL Replace local random function with random32() s2io: RTNL and flush_scheduled_work deadlock 8139too: RTNL and flush_scheduled_work deadlock sis190: RTNL and flush_scheduled_work deadlock r8169: RTNL and flush_scheduled_work deadlock [PATCH] ieee80211softmac: Fix setting of initial transmit rates [PATCH] bcm43xx: OFDM fix for rev 1 cards [PATCH] bcm43xx: Fix for 4311 and 02/07/07 specification changes [PATCH] prism54: correct assignment of DOT1XENABLE in WE-19 codepaths [PATCH] zd1211rw: Readd zd_addr_t cast [PATCH] bcm43xx: Fix for oops on resume [PATCH] bcm43xx: Ignore ampdu status reports [PATCH] wavelan: Use ARRAY_SIZE macro when appropriate [PATCH] hostap: Use ARRAY_SIZE macro when appropriate [PATCH] misc-wireless: Use ARRAY_SIZE macro when appropriate [PATCH] ipw2100: Use ARRAY_SIZE macro when appropriate [PATCH] bcm43xx: Janitorial change - remove two unused variables ...
2007-02-20Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds36-766/+629
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: Remove bogus SYSFS dependency backlight: simplify corgi_bl locking backlight: Separate backlight properties from backlight ops pointers backlight: Clean up pmac_backlight handling backlight: Improve backlight selection for fbdev drivers backlight: Rework backlight/fb interaction simplifying, lots backlight: Remove unneeded backlight update_status calls backlight: Remove uneeded update_status call from chipsfb.c backlight/fbcon: Add FB_EVENT_CONBLANK backlight: Fix Kconfig entries backlight: Remove uneeded nvidia set_power calls backlight: Convert semaphore -> mutex backlight: Fix external uses of backlight internal semaphore backlight: Minor code cleanups for hp680_bl.c backlight: Minor code cleanups for corgi_bl.c backlight: Remove excessive (un)likelys backlight: Remove unneeded owner field backlight: Fix error handling backlight: Add Frontpath ProGear HX1050+ driver backlight: Add maintainer entry
2007-02-20[PATCH] ARM: fix mach-at91 build breakageDavid Brownell1-1/+1
The rename of the AT91 subtree from mach-at91rm9200 to mach-at91 (to accomodate at91sam926x processors) was incomplete. It needs this patch to be able to build again. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds16-295/+173
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [NET] Eliminate user-selectable CONFIG_MV643XX_ETH_[012] [MIPS] Drop __init from init_8259A() [MIPS] Fix Kconfig typo bug [MIPS] Fix double signal on trap and break instruction [MIPS] sigset_32 has been made redundand by compat_sigset_t. [MIPS] emma2rh: Remove needless <asm/i8259.h> inclusion. [MIPS] Add MTD device support for Cobalt
2007-02-20[PATCH] tty_register_driver: Remove incorrect and superfluous castGeert Uytterhoeven1-3/+2
tty_register_driver: Remove incorrect and superfluous cast (expected and passed types are both const char *) Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[NET] Eliminate user-selectable CONFIG_MV643XX_ETH_[012]Dale Farnsworth5-77/+15
Remove the use of CONFIG_MV643XX_ETH_[012] variables on most platforms. Instead, platform-specific code enables the ports supported by the hardware. After this patch, these config variables are only used in arch/ppc, so also move them from drivers/net/Kconfig to arch/ppc/Kconfig. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: Paul Mackerras <paulus@samba.org>
2007-02-20[MIPS] Drop __init from init_8259A()Atsushi Nemoto1-5/+8
init_8259A() is called from i8259A_resume() so should not be marked as __init. And add some tests for whether 8259A was already initialized or not. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-20[MIPS] Fix Kconfig typo bugRalf Baechle1-1/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-20[MIPS] Fix double signal on trap and break instructionAtsushi Nemoto1-0/+2
This commit broke gdb, since any BREAK or TRAP instruction cause SIGSEGV. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-20[MIPS] sigset_32 has been made redundand by compat_sigset_t.Ralf Baechle1-8/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-20[MIPS] emma2rh: Remove needless <asm/i8259.h> inclusion.Yoichi Yuasa2-2/+0
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-20[MIPS] Add MTD device support for CobaltYoichi Yuasa5-202/+146
This patch has added MTD device support for Cobalt. Moreover, removes old type FlashROM support. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-20[ARM] 4165/1: S3C24XX: Select CONFIG_NO_IOPORTBen Dooks1-0/+1
On S3C24XX architecture, select CONFIG_NO_IOPORT as we only have memory based IO. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-20Merge branch 'upstream-jgarzik' of ↵Jeff Garzik18-185/+157
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream
2007-02-20natsemi: Support Aculab E1/T1 PMXc cPCI carrier cardsMark Brown1-1/+9
Aculab E1/T1 PMXc cPCI carrier card cards present a natsemi on the cPCI bus with an oversized EEPROM using a direct MII<->MII connection with no PHY. This patch adds a new device table entry supporting these cards. Signed-Off-By: Mark Brown <broonie@sirena.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-20natsemi: Add support for using MII port with no PHYMark Brown1-5/+30
This patch provides code paths which allow the natsemi driver to use the external MII port on the chip but ignore any PHYs that may be attached to it. The link state will be left as it was when the driver started and can be configured via ethtool. Any PHYs that are present can be accessed via the MII ioctl()s. This is useful for systems where the device is connected without a PHY or where either information or actions outside the scope of the driver are required in order to use the PHYs. Signed-Off-By: Mark Brown <broonie@sirena.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-20skge: race with workq and RTNLStephen Hemminger1-4/+5
If a workqueue function that needs RTNL is running when skge_down is called then a deadlock is possible. Fix by only clearing the timer, and handling the flush_scheduled_work on removal. This work queue is only ever used for the old fiber based boards. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-20Replace local random function with random32()Ralf Baechle3-31/+6
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-20s2io: RTNL and flush_scheduled_work deadlockFrancois Romieu1-3/+18
Mantra: don't use flush_scheduled_work with RTNL held. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-208139too: RTNL and flush_scheduled_work deadlockFrancois Romieu1-23/+17
Your usual dont-flush_scheduled_work-with-RTNL-held stuff. It is a bit different here since the thread runs permanently or is only occasionally kicked for recovery depending on the hardware revision. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-20sis190: RTNL and flush_scheduled_work deadlockFrancois Romieu1-2/+5
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-20r8169: RTNL and flush_scheduled_work deadlockFrancois Romieu1-7/+18
flush_scheduled_work() in net_device->close has a slight tendency to deadlock with tasks on the workqueue that hold RTNL. rtl8169_close/down simply need the recovery tasks to not meddle with the hardware while the device is going down. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-20[ARM] Fix s3c2410 ALSA audio for typedef eliminationRussell King1-3/+3
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-20[ARM] Fix ARM AACI ALSA driverRussell King1-6/+6
CC [M] sound/arm/aaci.o sound/arm/aaci.c:729: error: parse error before '*' token sound/arm/aaci.c:731: warning: function declaration isn't a prototype ... sound/arm/aaci.c:786: error: parse error before '*' token sound/arm/aaci.c:786: warning: function declaration isn't a prototype ... sound/arm/aaci.c:827: error: parse error before '*' token sound/arm/aaci.c:828: warning: function declaration isn't a prototype ... sound/arm/aaci.c:845: error: parse error before "aaci_capture_ops" sound/arm/aaci.c:845: warning: type defaults to `int' in declaration of `aaci_capture_ops' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-20[ARM] fix mach-at91 build breakageDavid Brownell1-1/+1
The rename of the AT91 subtree from mach-at91rm9200 to mach-at91 (to accomodate at91sam926x processors) was incomplete. It needs this patch to be able to build again. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-20[ARM] Fix jornada720 build errorsRussell King1-6/+0
kernel/built-in.o: In function `pm_suspend': utsname_sysctl.c:(.text+0x23008): multiple definition of `pm_suspend' arch/arm/mach-sa1100/built-in.o:arch/arm/mach-sa1100/sleep.S:(.text+0xf68): first defined here arm-linux-ld: Warning: size of symbol `pm_suspend' changed from 20 in arch/arm/mach-sa1100/built-in.o to 44 in kernel/built-in.o Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-20[ARM] Fix iop13xx build errorRussell King1-0/+1
CC arch/arm/mach-iop13xx/setup.o arch/arm/mach-iop13xx/setup.c: In function 'iq8134x_probe_flash_size': arch/arm/mach-iop13xx/setup.c:210: warning: implicit declaration of function 'ioremap' arch/arm/mach-iop13xx/setup.c:210: warning: initialization makes pointer from integer without a cast arch/arm/mach-iop13xx/setup.c:218: warning: implicit declaration of function 'writew' arch/arm/mach-iop13xx/setup.c:222: warning: implicit declaration of function 'readb' arch/arm/mach-iop13xx/setup.c:231: warning: implicit declaration of function 'iounmap' LD .tmp_vmlinux1 arch/arm/mach-iop13xx/built-in.o: In function `iop13xx_platform_init': iq81340mc.c:(.init.text+0x150): undefined reference to `ioremap' iq81340mc.c:(.init.text+0x21c): undefined reference to `writew' iq81340mc.c:(.init.text+0x24c): undefined reference to `writew' iq81340mc.c:(.init.text+0x254): undefined reference to `iounmap' iq81340mc.c:(.init.text+0x2c4): undefined reference to `readb' iq81340mc.c:(.init.text+0x2e8): undefined reference to `readb' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-20[ARM] Fix build error caused by move of apmRussell King1-1/+1
CC arch/arm/common/sharpsl_pm.o arch/arm/common/sharpsl_pm.c:30:31: error: asm/apm-emulation.h: No such file or directory ... Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-20backlight: Remove bogus SYSFS dependencyRichard Purdie2-4/+2
Remove a bogus SYSFS dependency from the backlight class Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-20[ARM] 4223/1: ixdp2351 : Fix for a define errorOzzy1-1/+1
Fix syntax error for a define in ixdp2351.h Signed-off-by: ozzy <linux-ozzy@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-20[ARM] Merge remaining IOP codeRussell King53-303/+412
Conflicts: include/asm-arm/arch-at91rm9200/entry-macro.S Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-20backlight: simplify corgi_bl lockingRichard Purdie1-8/+5
Now update_status has locking, we can remove the mutex from corgi_bl. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-20backlight: Separate backlight properties from backlight ops pointersRichard Purdie24-254/+223
Per device data such as brightness belongs to the indivdual device and should therefore be separate from the the backlight operation function pointers. This patch splits the two types of data and allows simplifcation of some code. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-20backlight: Clean up pmac_backlight handlingRichard Purdie8-101/+34
Move the setting/unsetting of pmac_backlight into the backlight core instead of doing it in each driver. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-20backlight: Improve backlight selection for fbdev driversJames Simmons1-37/+36
Improve backlight selection for fbdev drivers Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-20backlight: Rework backlight/fb interaction simplifying, lotsRichard Purdie9-184/+68
fb_info->bl_mutex is badly thought out and the backlight class doesn't need it if the framebuffer/backlight register/unregister order is consistent, particularly after the backlight locking fixes. Fix the drivers to use the order: backlight_device_register() register_framebuffer() unregister_framebuffer() backlight_device_unregister() and turn bl_mutex into a lock for the bl_curve data only. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-20backlight: Remove unneeded backlight update_status callsRichard Purdie3-41/+0
The backlight core listens for blanking events and triggers a backlight_update_status call so these extra calls are not needed and can be removed. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-20backlight: Remove uneeded update_status call from chipsfb.cRichard Purdie1-18/+0
Remove uneeded update_status call from chipsfb.c since the backlight core now receives software blanking notifications too. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-20backlight/fbcon: Add FB_EVENT_CONBLANKRichard Purdie3-2/+11
The backlight class wants notification whenever the console is blanked but doesn't get this when hardware blanking fails and software blanking is used. Changing FB_EVENT_BLANK to report both would be a behaviour change which could confuse the console layer so add a new event for software blanking and have the backlight class listen for both. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-20backlight: Fix Kconfig entriesRichard Purdie1-15/+4
Currently its possible to build the backlight core as a module yet compile the drivers into the kernel which gives missing symbols. Fix. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 09:59:40 +0000