Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fixlet from Jan Kara:
"A performance improvement to reduce impact of fsnotify for inodes
where it isn't used"
* tag 'fsnotify_for_v5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fs: Do not check if there is a fsnotify watcher on pseudo inodes
|
|
Pull rdma fixes from Jason Gunthorpe:
"Several regression fixes from work that landed in the merge window,
particularly in the mlx5 driver:
- Various static checker and warning fixes
- General bug fixes in rvt, qedr, hns, mlx5 and hfi1
- Several regression fixes related to the ECE and QP changes in last
cycle
- Fixes for a few long standing crashers in CMA, uverbs ioctl, and
xrc"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (25 commits)
IB/hfi1: Add atomic triggered sleep/wakeup
IB/hfi1: Correct -EBUSY handling in tx code
IB/hfi1: Fix module use count flaw due to leftover module put calls
IB/hfi1: Restore kfree in dummy_netdev cleanup
IB/mad: Fix use after free when destroying MAD agent
RDMA/mlx5: Protect from kernel crash if XRC_TGT doesn't have udata
RDMA/counter: Query a counter before release
RDMA/mad: Fix possible memory leak in ib_mad_post_receive_mads()
RDMA/mlx5: Fix integrity enabled QP creation
RDMA/mlx5: Remove ECE limitation from the RAW_PACKET QPs
RDMA/mlx5: Fix remote gid value in query QP
RDMA/mlx5: Don't access ib_qp fields in internal destroy QP path
RDMA/core: Check that type_attrs is not NULL prior access
RDMA/hns: Fix an cmd queue issue when resetting
RDMA/hns: Fix a calltrace when registering MR from userspace
RDMA/mlx5: Add missed RST2INIT and INIT2INIT steps during ECE handshake
RDMA/cma: Protect bind_list and listen_list while finding matching cm id
RDMA/qedr: Fix KASAN: use-after-free in ucma_event_handler+0x532
RDMA/efa: Set maximum pkeys device attribute
RDMA/rvt: Fix potential memory leak caused by rvt_alloc_rq
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix kernel crash on system call single stepping.
- Make sure early program check handler is executed with DAT on to
avoid an endless program check loop.
- Add __GFP_NOWARN flag to debug feature to avoid user triggerable
allocation failure messages.
* tag 's390-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/debug: avoid kernel warning on too large number of pages
s390/kasan: fix early pgm check handler execution
s390: fix system call single stepping
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes gathered in the last two weeks.
The major changes here are fixes for the recent DPCM regressions found
on i.MX and Qualcomm platforms and fixes for resource leaks in ASoC
DAI registrations.
Other than those are mostly device-specific fixes including the usual
USB- and HD-audio quirks, and a fix for syzkaller case and ID updates
for new Intel platforms"
* tag 'sound-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (32 commits)
ALSA: usb-audio: Fix OOB access of mixer element list
ALSA: usb-audio: add quirk for Samsung USBC Headset (AKG)
ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Flight S
ASoC: rockchip: Fix a reference count leak.
ASoC: amd: closing specific instance.
ALSA: hda: Intel: add missing PCI IDs for ICL-H, TGL-H and EKL
ASoC: hdac_hda: fix memleak with regmap not freed on remove
ASoC: SOF: Intel: add PCI IDs for ICL-H and TGL-H
ASoC: SOF: Intel: add PCI ID for CometLake-S
ASoC: Intel: SOF: merge COMETLAKE_LP and COMETLAKE_H
ALSA: hda/realtek: Add mute LED and micmute LED support for HP systems
ALSA: usb-audio: Fix potential use-after-free of streams
ALSA: hda/realtek - Add quirk for MSI GE63 laptop
ASoC: fsl_ssi: Fix bclk calculation for mono channel
ASoC: SOF: Intel: hda: Clear RIRB status before reading WP
ASoC: rt1015: Update rt1015 default register value according to spec modification.
ASoC: qcom: common: set correct directions for dailinks
ASoc: q6afe: add support to get port direction
ASoC: soc-pcm: fix checks for multi-cpu FE dailinks
ASoC: rt5682: Let dai clks be registered whether mclk exists or not
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fix from Gao Xiang:
"Fix a regression which uses potential uninitialized high 32-bit value
unexpectedly recently observed with specific compiler options"
* tag 'erofs-for-5.8-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix partially uninitialized misuse in z_erofs_onlinepage_fixup
|
|
Pull virtio fixes from Michael Tsirkin:
"Fixes all over the place.
This includes a couple of tests that I would normally defer, but since
they have already been helpful in catching some bugs, don't build for
any users at all, and having them upstream makes life easier for
everyone, I think it's ok even at this late stage"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
tools/virtio: Use tools/include/list.h instead of stubs
tools/virtio: Reset index in virtio_test --reset.
tools/virtio: Extract virtqueue initialization in vq_reset
tools/virtio: Use __vring_new_virtqueue in virtio_test.c
tools/virtio: Add --reset
tools/virtio: Add --batch=random option
tools/virtio: Add --batch option
virtio-mem: add memory via add_memory_driver_managed()
virtio-mem: silence a static checker warning
vhost_vdpa: Fix potential underflow in vhost_vdpa_mmap()
vdpa: fix typos in the comments for __vdpa_alloc_device()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread fix from Christian Brauner:
"This fixes a regression introduced with 303cc571d107 ("nsproxy: attach
to namespaces via pidfds").
The LTP testsuite reported a regression where users would now see
EBADF returned instead of EINVAL when an fd was passed that referred
to an open file but the file was not a namespace file.
Fix this by continuing to report EINVAL and add a regression test"
* tag 'for-linus-2020-06-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: test for setns() EINVAL regression
nsproxy: restore EINVAL for non-namespace file descriptor
|
|
When running iperf in a two host configuration the following trace can
occur:
[ 319.728730] NETDEV WATCHDOG: ib0 (hfi1): transmit queue 0 timed out
The issue happens because the current implementation relies on the netif
txq being stopped to control the flushing of the tx list.
There are two resources that the transmit logic can wait on and stop the
txq:
- SDMA descriptors
- Ring space to hold completions
The ring space is tested on the sending side and relieved when the ring is
consumed in the napi tx reaping.
Unfortunately, that reaping can run conncurrently with the workqueue
flushing of the txlist. If the txq is started just before the workitem
executes, the txlist will never be flushed, leading to the txq being
stuck.
Fix by:
- Adding sleep/wakeup wrappers
* Use an atomic to control the call to the netif routines inside the
wrappers
- Use another atomic to record ring space exhaustion
* Only wakeup when the a ring space exhaustion has happened and it
relieved
Add additional wrappers to clarify the ring space resource handling.
Fixes: d99dc602e2a5 ("IB/hfi1: Add functions to transmit datagram ipoib packets")
Link: https://lore.kernel.org/r/20200623204327.108092.4024.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The current code mishandles -EBUSY in two ways:
- The flow change doesn't test the return from the flush and runs on to
process the current packet racing with the wakeup processing
- The -EBUSY handling for a single packet inserts the tx into the txlist
after the submit call, racing with the same wakeup processing
Fix the first by dropping the skb and returning NETDEV_TX_OK.
Fix the second by insuring the the list entry within the txreq is inited
when allocated. This enables the sleep routine to detect that the txreq
has used the non-list api and queue the packet to the txlist.
Both flaws can lead to having the flushing thread executing in causing two
threads to manipulate the txlist.
Fixes: d99dc602e2a5 ("IB/hfi1: Add functions to transmit datagram ipoib packets")
Link: https://lore.kernel.org/r/20200623204321.108092.83898.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When the try_module_get calls were removed from opening and closing of the
i2c debugfs file, the corresponding module_put calls were missed. This
results in an inaccurate module use count that requires a power cycle to
fix.
Fixes: 09fbca8e6240 ("IB/hfi1: No need to use try_module_get for debugfs")
Link: https://lore.kernel.org/r/20200623203230.106975.76240.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
We need to do some rework on the dummy netdev. Calling the free_netdev()
would normally make sense, and that will be addressed in an upcoming
patch. For now just revert the behavior to what it was before keeping the
unused variable removal part of the patch.
The dd->dumm_netdev is mainly used for packet receiving through
alloc_netdev_mqs() for typical net devices. A a result, it should be freed
with kfree instead of free_netdev() that leads to a crash when unloading
the hfi1 module:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 8000000855b54067 P4D 8000000855b54067 PUD 84a4f5067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 73 PID: 10299 Comm: modprobe Not tainted 5.6.0-rc5+ #1
Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0016.033120161139 03/31/2016
RIP: 0010:__hw_addr_flush+0x12/0x80
Code: 40 00 48 83 c4 08 4c 89 e7 5b 5d 41 5c e9 76 77 18 00 66 0f 1f 44 00 00 0f 1f 44 00 00 41 54 49 89 fc 55 53 48 8b 1f 48 39 df <48> 8b 2b 75 08 eb 4a 48 89 eb 48 89 c5 48 89 df e8 99 bf d0 ff 84
RSP: 0018:ffffb40e08783db8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000002
RDX: ffffb40e00000000 RSI: 0000000000000246 RDI: ffff88ab13662298
RBP: ffff88ab13662000 R08: 0000000000001549 R09: 0000000000001549
R10: 0000000000000001 R11: 0000000000aaaaaa R12: ffff88ab13662298
R13: ffff88ab1b259e20 R14: ffff88ab1b259e42 R15: 0000000000000000
FS: 00007fb39b534740(0000) GS:ffff88b31f940000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000084d3ea004 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
dev_addr_flush+0x15/0x30
free_netdev+0x7e/0x130
hfi1_netdev_free+0x59/0x70 [hfi1]
remove_one+0x65/0x110 [hfi1]
pci_device_remove+0x3b/0xc0
device_release_driver_internal+0xec/0x1b0
driver_detach+0x46/0x90
bus_remove_driver+0x58/0xd0
pci_unregister_driver+0x26/0xa0
hfi1_mod_cleanup+0xc/0xd54 [hfi1]
__x64_sys_delete_module+0x16c/0x260
? exit_to_usermode_loop+0xa4/0xc0
do_syscall_64+0x5b/0x200
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 193ba03141bb ("IB/hfi1: Use free_netdev() in hfi1_netdev_free()")
Link: https://lore.kernel.org/r/20200623203224.106975.16926.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The USB-audio mixer code holds a linked list of usb_mixer_elem_list,
and several operations are performed for each mixer element. A few of
them (snd_usb_mixer_notify_id() and snd_usb_mixer_interrupt_v2())
assume each mixer element being a usb_mixer_elem_info object that is a
subclass of usb_mixer_elem_list, cast via container_of() and access it
members. This may result in an out-of-bound access when a
non-standard list element has been added, as spotted by syzkaller
recently.
This patch adds a new field, is_std_info, in usb_mixer_elem_list to
indicate that the element is the usb_mixer_elem_info type or not, and
skip the access to such an element if needed.
Reported-by: syzbot+fb14314433463ad51625@syzkaller.appspotmail.com
Reported-by: syzbot+2405ca3401e943c538b5@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200624122340.9615-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Hongyu reported "id != index" in z_erofs_onlinepage_fixup() with
specific aarch64 environment easily, which wasn't shown before.
After digging into that, I found that high 32 bits of page->private
was set to 0xaaaaaaaa rather than 0 (due to z_erofs_onlinepage_init
behavior with specific compiler options). Actually we only use low
32 bits to keep the page information since page->private is only 4
bytes on most 32-bit platforms. However z_erofs_onlinepage_fixup()
uses the upper 32 bits by mistake.
Let's fix it now.
Reported-and-tested-by: Hongyu Jin <hongyu.jin@unisoc.com>
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20200618234349.22553-1-hsiangkao@aol.com
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
|
|
Pull kvm fixes from Paolo Bonzini:
"All bugfixes except for a couple cleanup patches"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Remove vcpu_vmx's defunct copy of host_pkru
KVM: x86: allow TSC to differ by NTP correction bounds without TSC scaling
KVM: X86: Fix MSR range of APIC registers in X2APIC mode
KVM: VMX: Stop context switching MSR_IA32_UMWAIT_CONTROL
KVM: nVMX: Plumb L2 GPA through to PML emulation
KVM: x86/mmu: Avoid mixing gpa_t with gfn_t in walk_addr_generic()
KVM: LAPIC: ensure APIC map is up to date on concurrent update requests
kvm: lapic: fix broken vcpu hotplug
Revert "KVM: VMX: Micro-optimize vmexit time when not exposing PMU"
KVM: VMX: Add helpers to identify interrupt type from intr_info
kvm/svm: disable KCSAN for svm_vcpu_run()
KVM: MIPS: Fix a build error for !CPU_LOONGSON64
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A number of fixes, located in two areas, one performance fix and one
fixup for better integration with another patchset.
- bug fixes in nowait aio:
- fix snapshot creation hang after nowait-aio was used
- fix failure to write to prealloc extent past EOF
- don't block when extent range is locked
- block group fixes:
- relocation failure when scrub runs in parallel
- refcount fix when removing fails
- fix race between removal and creation
- space accounting fixes
- reinstante fast path check for log tree at unlink time, fixes
performance drop up to 30% in REAIM
- kzfree/kfree fixup to ease treewide patchset renaming kzfree"
* tag 'for-5.8-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: use kfree() in btrfs_ioctl_get_subvol_info()
btrfs: fix RWF_NOWAIT writes blocking on extent locks and waiting for IO
btrfs: fix RWF_NOWAIT write not failling when we need to cow
btrfs: fix failure of RWF_NOWAIT write into prealloc extent beyond eof
btrfs: fix hang on snapshot creation after RWF_NOWAIT write
btrfs: check if a log root exists before locking the log_mutex on unlink
btrfs: fix bytes_may_use underflow when running balance and scrub in parallel
btrfs: fix data block group relocation failure due to concurrent scrub
btrfs: fix race between block group removal and block group creation
btrfs: fix a block group ref counter leak after failure to remove block group
|
|
We've found Samsung USBC Headset (AKG) (VID: 0x04e8, PID: 0xa051)
need a tiny delay after each class compliant request.
Otherwise the device might not be able to be recognized each times.
Signed-off-by: Chihhao Chen <chihhao.chen@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1592910203-24035-1-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When specifying insanely large debug buffers a kernel warning is
printed. The debug code does handle the error gracefully, though.
Instead of duplicating the check let us silence the warning to
avoid crashes when panic_on_warn is used.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Currently if early_pgm_check_handler is called it ends up in pgm check
loop. The problem is that early_pgm_check_handler is instrumented by
KASAN but executed without DAT flag enabled which leads to addressing
exception when KASAN checks try to access shadow memory.
Fix that by executing early handlers with DAT flag on under KASAN as
expected.
Reported-and-tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
When single stepping an svc instruction on s390, the kernel is entered
with a PER program check interruption. The program check handler than
jumps to the system call handler by reloading the PSW. The code didn't
set GPR13 to the thread pointer in struct task_struct. This made the
kernel access invalid memory while trying to fetch the syscall function
address. Fix this by always assigned GPR13 after .Lsysc_per.
Fixes: 0b0ed657fe00 ("s390: remove critical section cleanup from entry.S")
Reported-and-tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Similar to the Kingston HyperX AMP, the Kingston HyperX Cloud
Alpha S (0951:0x16ea) uses two interfaces, but only the second
interface contains the capture stream. This patch delays the
registration until the second interface appears.
Signed-off-by: Christoffer Nielsen <cn@obviux.dk>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAOtG2YHOM3zy+ed9KS-J4HkZo_QGzcUG9MigSp4e4_-13r6B=Q@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove vcpu_vmx.host_pkru, which got left behind when PKRU support was
moved to common x86 code.
No functional change intended.
Fixes: 37486135d3a7b ("KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200617034123.25647-1-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The Linux TSC calibration procedure is subject to small variations
(its common to see +-1 kHz difference between reboots on a given CPU, for example).
So migrating a guest between two hosts with identical processor can fail, in case
of a small variation in calibrated TSC between them.
Without TSC scaling, the current kernel interface will either return an error
(if user_tsc_khz <= tsc_khz) or enable TSC catchup mode.
This change enables the following TSC tolerance check to
accept KVM_SET_TSC_KHZ within tsc_tolerance_ppm (which is 250ppm by default).
/*
* Compute the variation in TSC rate which is acceptable
* within the range of tolerance and decide if the
* rate being applied is within that bounds of the hardware
* rate. If so, no scaling or compensation need be done.
*/
thresh_lo = adjust_tsc_khz(tsc_khz, -tsc_tolerance_ppm);
thresh_hi = adjust_tsc_khz(tsc_khz, tsc_tolerance_ppm);
if (user_tsc_khz < thresh_lo || user_tsc_khz > thresh_hi) {
pr_debug("kvm: requested TSC rate %u falls outside tolerance [%u,%u]\n", user_tsc_khz, thresh_lo, thresh_hi);
use_scaling = 1;
}
NTP daemon in the guest can correct this difference (NTP can correct upto 500ppm).
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20200616114741.GA298183@fuller.cnet>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Only MSR address range 0x800 through 0x8ff is architecturally reserved
and dedicated for accessing APIC registers in x2APIC mode.
Fixes: 0105d1a52640 ("KVM: x2apic interface to lapic")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200616073307.16440-1-xiaoyao.li@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove support for context switching between the guest's and host's
desired UMWAIT_CONTROL. Propagating the guest's value to hardware isn't
required for correct functionality, e.g. KVM intercepts reads and writes
to the MSR, and the latency effects of the settings controlled by the
MSR are not architecturally visible.
As a general rule, KVM should not allow the guest to control power
management settings unless explicitly enabled by userspace, e.g. see
KVM_CAP_X86_DISABLE_EXITS. E.g. Intel's SDM explicitly states that C0.2
can improve the performance of SMT siblings. A devious guest could
disable C0.2 so as to improve the performance of their workloads at the
detriment to workloads running in the host or on other VMs.
Wholesale removal of UMWAIT_CONTROL context switching also fixes a race
condition where updates from the host may cause KVM to enter the guest
with the incorrect value. Because updates are are propagated to all
CPUs via IPI (SMP function callback), the value in hardware may be
stale with respect to the cached value and KVM could enter the guest
with the wrong value in hardware. As above, the guest can't observe the
bad value, but it's a weird and confusing wart in the implementation.
Removal also fixes the unnecessary usage of VMX's atomic load/store MSR
lists. Using the lists is only necessary for MSRs that are required for
correct functionality immediately upon VM-Enter/VM-Exit, e.g. EFER on
old hardware, or for MSRs that need to-the-uop precision, e.g. perf
related MSRs. For UMWAIT_CONTROL, the effects are only visible in the
kernel via TPAUSE/delay(), and KVM doesn't do any form of delay in
vcpu_vmx_run(). Using the atomic lists is undesirable as they are more
expensive than direct RDMSR/WRMSR.
Furthermore, even if giving the guest control of the MSR is legitimate,
e.g. in pass-through scenarios, it's not clear that the benefits would
outweigh the overhead. E.g. saving and restoring an MSR across a VMX
roundtrip costs ~250 cycles, and if the guest diverged from the host
that cost would be paid on every run of the guest. In other words, if
there is a legitimate use case then it should be enabled by a new
per-VM capability.
Note, KVM still needs to emulate MSR_IA32_UMWAIT_CONTROL so that it can
correctly expose other WAITPKG features to the guest, e.g. TPAUSE,
UMWAIT and UMONITOR.
Fixes: 6e3ba4abcea56 ("KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL")
Cc: stable@vger.kernel.org
Cc: Jingqi Liu <jingqi.liu@intel.com>
Cc: Tao Xu <tao3.xu@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200623005135.10414-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explicitly pass the L2 GPA to kvm_arch_write_log_dirty(), which for all
intents and purposes is vmx_write_pml_buffer(), instead of having the
latter pull the GPA from vmcs.GUEST_PHYSICAL_ADDRESS. If the dirty bit
update is the result of KVM emulation (rare for L2), then the GPA in the
VMCS may be stale and/or hold a completely unrelated GPA.
Fixes: c5f983f6e8455 ("nVMX: Implement emulated Page Modification Logging")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622215832.22090-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently, when RMPP MADs are processed while the MAD agent is destroyed,
it could result in use after free of rmpp_recv, as decribed below:
cpu-0 cpu-1
----- -----
ib_mad_recv_done()
ib_mad_complete_recv()
ib_process_rmpp_recv_wc()
unregister_mad_agent()
ib_cancel_rmpp_recvs()
cancel_delayed_work()
process_rmpp_data()
start_rmpp()
queue_delayed_work(rmpp_recv->cleanup_work)
destroy_rmpp_recv()
free_rmpp_recv()
cleanup_work()[1]
spin_lock_irqsave(&rmpp_recv->agent->lock) <-- use after free
[1] cleanup_work() == recv_cleanup_handler
Fix it by waiting for the MAD agent reference count becoming zero before
calling to ib_cancel_rmpp_recvs().
Fixes: 9a41e38a467c ("IB/mad: Use IDR for agent IDs")
Link: https://lore.kernel.org/r/20200621104738.54850-2-leon@kernel.org
Signed-off-by: Shay Drory <shayd@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Don't deref udata if it is NULL
BUG: kernel NULL pointer dereference, address: 0000000000000030
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 SMP PTI
CPU: 2 PID: 1592 Comm: python3 Not tainted 5.7.0-rc6+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
RIP: 0010:create_qp+0x39e/0xae0 [mlx5_ib]
Code: c0 0d 00 00 bf 10 01 00 00 e8 be a9 e4 e0 48 85 c0 49 89 c2 0f 84 0c 07 00 00 41 8b 85 74 63 01 00 0f c8 a9 00 00 00 10 74 0a <41> 8b 46 30 0f c8 41 89 42 14 41 8b 52 18 41 0f b6 4a 1c 0f ca 89
RSP: 0018:ffffc9000067f8b0 EFLAGS: 00010206
RAX: 0000000010170000 RBX: ffff888441313000 RCX: 0000000000000000
RDX: 0000000000000200 RSI: 0000000000000000 RDI: ffff88845b1d4400
RBP: ffffc9000067fa60 R08: 0000000000000200 R09: ffff88845b1d4200
R10: ffff88845b1d4200 R11: ffff888441313000 R12: ffffc9000067f950
R13: ffff88846ac00140 R14: 0000000000000000 R15: ffff88846c2bc000
FS: 00007faa1a3c0540(0000) GS:ffff88846fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000030 CR3: 0000000446dca003 CR4: 0000000000760ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
? __switch_to_asm+0x40/0x70
? __switch_to_asm+0x34/0x70
mlx5_ib_create_qp+0x897/0xfa0 [mlx5_ib]
ib_create_qp+0x9e/0x300 [ib_core]
create_qp+0x92d/0xb20 [ib_uverbs]
? ib_uverbs_cq_event_handler+0x30/0x30 [ib_uverbs]
? release_resource+0x30/0x30
ib_uverbs_create_qp+0xc4/0xe0 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xc8/0xf0 [ib_uverbs]
ib_uverbs_run_method+0x223/0x770 [ib_uverbs]
? track_pfn_remap+0xa7/0x100
? uverbs_disassociate_api+0xd0/0xd0 [ib_uverbs]
? remap_pfn_range+0x358/0x490
ib_uverbs_cmd_verbs.isra.6+0x19b/0x370 [ib_uverbs]
? rdma_umap_priv_init+0x82/0xe0 [ib_core]
? vm_mmap_pgoff+0xec/0x120
ib_uverbs_ioctl+0xc0/0x120 [ib_uverbs]
ksys_ioctl+0x92/0xb0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x48/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: e383085c2425 ("RDMA/mlx5: Set ECE options during QP create")
Link: https://lore.kernel.org/r/20200621115959.60126-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
translate_gpa() returns a GPA, assigning it to 'real_gfn' seems obviously
wrong. There is no real issue because both 'gpa_t' and 'gfn_t' are u64 and
we don't use the value in 'real_gfn' as a GFN, we do
real_gfn = gpa_to_gfn(real_gfn);
instead. 'If you see a "buffalo" sign on an elephant's cage, do not trust
your eyes', but let's fix it for good.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200622151435.752560-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The following race can cause lost map update events:
cpu1 cpu2
apic_map_dirty = true
------------------------------------------------------------
kvm_recalculate_apic_map:
pass check
mutex_lock(&kvm->arch.apic_map_lock);
if (!kvm->arch.apic_map_dirty)
and in process of updating map
-------------------------------------------------------------
other calls to
apic_map_dirty = true might be too late for affected cpu
-------------------------------------------------------------
apic_map_dirty = false
-------------------------------------------------------------
kvm_recalculate_apic_map:
bail out on
if (!kvm->arch.apic_map_dirty)
To fix it, record the beginning of an update of the APIC map in
apic_map_dirty. If another APIC map change switches apic_map_dirty
back to DIRTY during the update, kvm_recalculate_apic_map should not
make it CLEAN, and the other caller will go through the slow path.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Query a dynamically-allocated counter before release it, to update it's
hwcounters and log all of them into history data. Otherwise all values of
these hwcounters will be lost.
Fixes: f34a55e497e8 ("RDMA/core: Get sum value of all counters when perform a sysfs stat read")
Link: https://lore.kernel.org/r/20200621110000.56059-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"Quite a lot of fixes here for no single reason.
There's a collection of the usual sort of device specific fixes and
also a bunch of people have been working on spidev and the userspace
test program spidev_test so they've got an unusually large collection
of small fixes"
* tag 'spi-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spidev: fix a potential use-after-free in spidev_release()
spi: spidev: fix a race between spidev_release and spidev_remove
spi: stm32-qspi: Fix error path in case of -EPROBE_DEFER
spi: uapi: spidev: Use TABs for alignment
spi: spi-fsl-dspi: Free DMA memory with matching function
spi: tools: Add macro definitions to fix build errors
spi: tools: Make default_tx/rx and input_tx static
spi: dt-bindings: amlogic, meson-gx-spicc: Fix schema for meson-g12a
spi: rspi: Use requested instead of maximum bit rate
spi: spidev_test: Use %u to format unsigned numbers
spi: sprd: switch the sequence of setting WDG_LOAD_LOW and _HIGH
|
|
Guest fails to online hotplugged CPU with error
smpboot: do_boot_cpu failed(-1) to wakeup CPU#4
It's caused by the fact that kvm_apic_set_state(), which used to call
recalculate_apic_map() unconditionally and pulled hotplugged CPU into
apic map, is updating map conditionally on state changes. In this case
the APIC map is not considered dirty and the is not updated.
Fix the issue by forcing unconditional update from kvm_apic_set_state(),
like it used to be.
Fixes: 4abaffce4d25a ("KVM: LAPIC: Recalculate apic map in batch")
Cc: stable@vger.kernel.org
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200622160830.426022-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"This has a fix for the refactoring out of the pickable ranges
functionality, plus the removal of a BROKEN dependency on mt6358 now
that the dependencies were merged in -rc1 and a couple of device
specific fixes"
* tag 'regulator-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: mt6358: Remove BROKEN dependency
regualtor: pfuze100: correct sw1a/sw2 on pfuze3000
regulator: Fix pickable ranges mapping
regulator: da9063: fix LDO9 suspend and warning.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"A few small fixes, none of which are likely to have any substantial
impact here - the most substantial one is a fix for a long standing
memory leak on devices that use register patching which will only have
an impact if the device is removed and re-added"
* tag 'regmap-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix memory leak from regmap_register_patch
regmap: fix the kerneldoc for regmap_test_bits()
regmap: fix alignment issue
|
|
It should not make any significant difference but reduce stub code.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Link: https://lore.kernel.org/r/20200418102217.32327-9-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This way behavior for vhost is more like a VM.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Link: https://lore.kernel.org/r/20200418102217.32327-8-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
So we can reset after that in the main loop.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Link: https://lore.kernel.org/r/20200418102217.32327-7-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
As updated in ("2a2d1382fe9d virtio: Add improved queue allocation API")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Link: https://lore.kernel.org/r/20200418102217.32327-6-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Currently, it only removes and add backend, but it will reset vq
position in future commits.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Link: https://lore.kernel.org/r/20200418102217.32327-5-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
So we can test with non-deterministic batches in flight.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Link: https://lore.kernel.org/r/20200418102217.32327-4-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This allow to test vhost having >1 buffers in flight
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Link: https://lore.kernel.org/r/20200401183118.8334-5-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20200418102217.32327-3-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Virtio-mem managed memory is always detected and added by the virtio-mem
driver, never using something like the firmware-provided memory map.
This is the case after an ordinary system reboot, and has to be guaranteed
after kexec. Especially, virtio-mem added memory resources can contain
inaccessible parts ("unblocked memory blocks"), blindly forwarding them
to a kexec kernel is dangerous, as unplugged memory will get accessed
(esp. written).
Let's use the new way of adding special driver-managed memory introduced
in commit 7b7b27214bba ("mm/memory_hotplug: introduce
add_memory_driver_managed()").
This will result in no entries in /sys/firmware/memmap ("raw firmware-
provided memory map"), the memory resource will be flagged
IORESOURCE_MEM_DRIVER_MANAGED (esp., kexec_file_load() will not place
kexec images on this memory), and it is exposed as "System RAM
(virtio_mem)" in /proc/iomem, so esp. kexec-tools can properly handle it.
Example /proc/iomem before this change:
[...]
140000000-333ffffff : virtio0
140000000-147ffffff : System RAM
334000000-533ffffff : virtio1
338000000-33fffffff : System RAM
340000000-347ffffff : System RAM
348000000-34fffffff : System RAM
[...]
Example /proc/iomem after this change:
[...]
140000000-333ffffff : virtio0
140000000-147ffffff : System RAM (virtio_mem)
334000000-533ffffff : virtio1
338000000-33fffffff : System RAM (virtio_mem)
340000000-347ffffff : System RAM (virtio_mem)
348000000-34fffffff : System RAM (virtio_mem)
[...]
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Fixes: 5f1f79bbc9e26 ("virtio-mem: Paravirtualized memory hotplug")
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200611093518.5737-1-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
|
|
Smatch complains that "rc" can be uninitialized if we hit the "break;"
statement on the first iteration through the loop. I suspect that this
can't happen in real life, but returning a zero literal is cleaner and
silence the static checker warning.
Fixes: 5f1f79bbc9e2 ("virtio-mem: Paravirtualized memory hotplug")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200610085911.GC5439@mwanda
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The "vma->vm_pgoff" variable is an unsigned long so if it's larger than
INT_MAX then "index" can be negative leading to an underflow. Fix this
by changing the type of "index" to "unsigned long".
Fixes: ddd89d0a059d ("vhost_vdpa: support doorbell mapping via mmap")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200610085852.GB5439@mwanda
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fix two typos in the comments for __vdpa_alloc_device().
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200527060528.9100-1-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.8
This is a collection of mostly small fixes, mostly fixing fallout from
some of the DPCM changes that went in last time around which shook out
some issues on i.MX and Qualcomm platforms. The addition of a managed
version of snd_soc_register_dai() is to fix resource leaks.
There's also a few new device IDs for x86 systems.
|
|
This reverts commit 8ece3b3eb576a78d2e67ad4c3a80a39fa6708809.
This commit broke userspace. Bash uses ESPIPE to determine whether or
not the file should be read using "unbuffered I/O", which means reading
1 byte at a time instead of 128 bytes at a time. I used to use bash to
read through kmsg in a really quite nasty way:
while read -t 0.1 -r line 2>/dev/null || [[ $? -ne 142 ]]; do
echo "SARU $line"
done < /dev/kmsg
This will show all lines that can fit into the 128 byte buffer, and skip
lines that don't. That's pretty awful, but at least it worked.
With this change, bash now tries to do 1-byte reads, which means it
skips all the lines, which is worse than before.
Now, I don't really care very much about this, and I'm already look for
a workaround. But I did just spend an hour trying to figure out why my
scripts were broken. Either way, it makes no difference to me personally
whether this is reverted, but it might be something to consider. If you
declare that "trying to read /dev/kmsg with bash is terminally stupid
anyway," I might be inclined to agree with you. But do note that bash
uses lseek(fd, 0, SEEK_CUR)==>ESPIPE to determine whether or not it's
reading from a pipe.
Cc: Bruno Meneguele <bmeneg@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux fixes from Paul Moore:
"Three small patches to fix problems in the SELinux code, all found via
clang.
Two patches fix potential double-free conditions and one fixes an
undefined return value"
* tag 'selinux-pr-20200621' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix undefined return of cond_evaluate_expr
selinux: fix a double free in cond_read_node()/cond_read_list()
selinux: fix double free
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some early fixes collected during the first week after the merge
window, all pretty self-evident, with the details below. The revert is
the crucial thing.
- Fix a warning on the Qualcomm SPMI GPIO chip being instatiated
twice without a unique irqchip struct
- Use the noirq variants of the suspend and resume callbacks in the
Tegra driver
- Clean up the errorpath on the MCP23s08 driver
- Revert the use of devm_of_iomap() in the Freescale driver as it was
regressing the platform
- Add some missing pins in the Qualcomm IPQ6018 driver
- Fix a simple documentation bug in the pinctrl-single driver"
* tag 'pinctrl-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: single: fix function name in documentation
pinctrl: qcom: ipq6018 Add missing pins in qpic pin group
Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'"
pinctrl: mcp23s08: Split to three parts: fix ptr_ret.cocci warnings
pinctrl: tegra: Use noirq suspend/resume callbacks
pinctrl: qcom: spmi-gpio: fix warning about irq chip reusage
|