summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2010-02-26V4L/DVB: Add support for SMT7020 to cx88Dirk Herrendoerfer4-0/+243
This patch adds support for the built-in dvb device of a Samsung SMT7020s (x86 based STB) to the cx88 family. Signed-off-by: Dirk Herrendoerfer <d.herrendoerfer@herrendoerfer.name> Signed-off-by: Helmut Auer <helmut@helmutauer.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: radio-si470x: Use UTF-8 encoding on a commentTobias Lorenz1-1/+1
This cosmetic patch corrects a wrong unicode "micro" character in a comment. Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: MAINTAINERS: Telegent tlg2300 section fixJoe Perches1-4/+3
linux-next commit 2ff8223957d901999bf76aaf2c6183e33a6ad14e exposes an infinite loop defect in scripts/get_maintainer.pl Fix the incorrect format of the MAINTAINERS "M:" entries. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_stv06xx: Add support for camera buttonHans de Goede1-1/+28
Only tested with an stv6422 based cam, as that is the only stv06xx cam I have with a button. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_ov519: add support for the button on ov511 based camsHans de Goede1-5/+17
Due to hardware limitations this only works while the camera is streaming. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_ov519: Add support for the button on ov518 based camsHans de Goede1-25/+29
Due to hardware limitations this only works while the camera is streaming. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_ov519: add support for the button on ov519 based camsHans de Goede1-0/+62
Note due to hardware limitiations (no interrupt endpoint), this only works when the camera is streaming. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not setHans de Goede1-1/+3
gspca_main: Fix a compile error when CONFIG_INPUT is not set. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_main: some input error handling fixesHans de Goede1-9/+10
2 small changes to input device error handling: 1) Make it fatal when we fail to create an input device (it is either this or add checks for gspca_dev->input_dev being NULL in a lot of places) 2) Since we allow gspca_input_create_urb() to fail everywhere we call it, and thus never check its return value, make it void. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputsHans de Goede2-1/+4
Allow use of the gspca core input device creation code by subdrivers which have non interrupt driven camera buttons. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_pac7302: much improved exposure controlHans de Goede2-60/+54
My experience with fixing up the controls for the PAS sensors in sonixb, has lead me to re-investigate the exposure control for the pac7302. I've now found a regular exposure register in register bank 3 (which seems to be the sensor registers bank), and with this added a proper fine grained exposure control. This patch also updates the do_autogain function to work properly with this new finer grained control. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 camerasHans de Goede2-4/+8
Make the sonixb driver handle pas106 and pas202 cameras, when both it and the sn9c102 driver are enabled in the kernel configuration. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrlsHans de Goede1-21/+80
Fixup brightness ctrl and add gain and exposure ctrls for PAS106B sensors, this allows enabling autogain (done), and makes the cam usable in low light conditions. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: Documentation: gspca.txt: update known mr97310a camsHans de Goede2-4/+4
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPixTheodore Kilgore1-20/+177
This camera has a sensor type we did not support sofar, this patch adds support for the new sensor type found in the Sakar 1638x CyberPix. Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480Hans de Goede1-4/+5
In 640x480, if the reg11 has less than 4, the image is unstable (the bridge goes into a higher compression mode which we have not reverse engineered yet). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and ↵Hans de Goede1-48/+122
exposure ctrls Fixup brightness ctrl and add gain and exposure ctrls for PAS202BCB sensors, this allows enabling autogain (done), and makes the cam usable in low light conditions. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine ↵Hans de Goede3-38/+193
expo ctrl Some sensors only allow controlling the exposure by changing the clockdiv, which means that exposure takes pretty large jumps (for example when going from a div of 1 to 2, the exposure doubles). Use 2 different entries in the controls array for these 2 different types of exposure (always disabling one), and; Add a new autogain algorithm for the coarse exposure case, which normally changes the gain setting, only touching the exposure setting if the desired luminance cannot be reached with gain, and after an exposure change once more first tries gain, etc. Thus avoiding exposure changes, and the resulting oscilation because of the huge steps these exposure controls take. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sonixb: leave bridge gain at 1.0 when we have a sensor gainHans de Goede1-12/+14
Leave bridge gain at 1.0 when we have a sensor gain, while at it also change the bridge gain setting code to write both registers in one go saving us a usb transaction. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sonixj: Add camera button supportHans de Goede1-3/+30
gspca_sonixj: Add camera button support Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sonixb: Add support for camera buttonHans de Goede1-0/+23
gspca_sonixb: Add support for camera button Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gscpa_zc3xx: Add support for camera buttonHans de Goede1-0/+20
gscpa_zc3xx: Add support for camera button Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gscpa_pac7311: Add support for camera buttonHans de Goede1-0/+35
gscpa_pac7311: Add support for camera button Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gscpa_pac207: Add support for camera buttonHans de Goede1-0/+23
gscpa_pac207: Add support for camera button Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gscpa Documentation: add cpia1 camerasHans de Goede1-0/+2
gscpa Documentation: add cpia1 cameras Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_sq905c: Add an additional USB-IDHans de Goede1-0/+1
gspca_sq905c: Add an additional USB-ID Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: gspca_mr97310a: Simplify sensor detectionTheodore Kilgore1-13/+10
Simplify sensor detection a bit (share more of the code between cif and vga cameras). Also remove an unnecessary write from zero_the_pointer(). Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: ivtv: Tweak Sony GigaPocket Kikyou card entry based on experimentsAndy Walls1-15/+8
Based on experiments by Eric Wescott, edit the Sony GigaPocket (Kikyou) card entry video and audio mux settings. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: ivtv: Add initial entry for Sony VAIO Giga Pocket (Kikyou) cardsEric Anderson3-1/+59
This is a slightly modified version of Eric Anderson's original patch for the Sony Giga Pocket board. It has been updated to apply to the latest ivtv driver version by Hans Verkuil <hverkuil@xs4all.nl> and Andy Walls <awalls@radix.net>. Also Andy Walls modified the patch to use a new Sony BTF-Pnx01Z tuner entry based on Eric Anderson's experimental findings for the bandswitch. >From Eric Anderson's original email: 1. The tuner on the card doesn't seem to match any standard ones. I modified an existing tuner entry. Ideally a new tuner entry should be created. (The only difference from the one I modified is that the low-to-mid range frequency cut-off is slightly different, as are the bit config settings.) 2. It wasn't obvious how to choose a second audio input other than using "radio" as an option. Basically there's two GPIO audio inputs. Using radio allowed me to avoid major restructuring to the code. (perhaps other cards don't have this often...) 3. It's not clear that there's a mute setting that works. Not sure why. 4. I haven't had a chance to test the two Svideo inputs. I set them to COMPOSITE1 and SVIDEO2, but I'm not sure those are the correct settings. The standard composite video inputs seem to work. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: tuner-types: Add Sony BTF-Pxn01Z tuner type used on GigaPocket cardsAndy Walls3-0/+23
Sony makes custome tuners for its GigaPocket line of ivtv based capture cards. This adds an entry to the tuner-types list for such tuners. Parameters are based on experiments by Eric Anderson <rico99@sbcglobal.net>. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: ivtv: Fix ivtv_api_get_data() to avoid unneeded IO during IRQ handlingAndy Walls4-10/+13
ivtv_api_get_data() was performing more PCI MMIO than needed, resulting often in it accounting for more than half the total time spent in ivtv_irq_handler(). Now it only reads at most 7 of the 16 mailbox data words over the PCI bus, and in some instances only 2 or 3 data words as needed. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: V4L - vpfe capture - build environment for isif driverMurali Karicheri2-1/+14
Adding Makefile and Kconfig for ISIF driver Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: V4L - vpfe capture - vpss driver enhancements for DM365Murali Karicheri2-55/+275
Enhancements to support DM365 ISP5 and VPSS module configuration. Also cleaned up the driver by removing redundant variables. Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: V4L - vpfe capture - source for ISIF driver on DM365Murali Karicheri1-0/+1172
This is the source file for ISIF driver on DM365. ISIF driver is equivalent to CCDC driver on DM355 and DM644x. This driver is tested for YUV capture from TVP514x driver. This patch contains the header files required for this driver. Reviewed-by: Nori, Sekhar <nsekhar@ti.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: V4L - vpfe capture - header files for ISIF driverMurali Karicheri2-0/+800
This is the header file for ISIF driver on DM365. ISIF driver is equivalent to CCDC driver on DM355 and DM644x. This driver is tested for YUV capture from TVP514x driver. This patch contains the header files required for this driver. Reviewed-by: Nori, Sekhar <nsekhar@ti.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: DaVinci - Adding platform & board changes for vpfe capture on DM365Murali Karicheri3-1/+174
This patch adds following changes:- 1) add sub device configuration data for TVP5146 used by vpfe capture 2) registers platform devices for vpfe_capture, isif and vpss 3) defines hardware resources for the devices listed under 2) 4) defines clock aliase for isif driver 5) adding setup_pinmux() for isif Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: pvrusb2: Adjust 300msec digitizer wait to be more selectiveMike Isely1-4/+9
We know that the 300msec settling time after starting the digitizer is only really needed when the digitizer is a SAA7115. So if we're not using a SAA7115, skip the delay. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: pvrusb2: Reduce encoder quiet periodMike Isely1-4/+2
After implementing a 300msec wait between digitizer start and encoder start, it has been determined that we don't need to wait quite as long before configuring the encoder. This reduces the wait period from 100msec back to 50msec. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: pvrusb2: Enforce a 300msec stabilization interval during stream strartMike Isely3-5/+49
Martin Dauskardt <martin.dauskardt@gmx.de> has determined that the encoder has a much better chance of starting cleanly if we deliberately hold off starting it util the video digitizer has had a chance to run for at least 300msec first. These changes implement an enforced 300msec wait in the state machine that orchestrates streaming start / stop. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: V4L2 docs: replace spaces by tabsMauro Carvalho Chehab2-23/+22
CC: Jonathan Corbet <corbet@lwn.net> CC: Reviewed-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: V4L2: Add a document describing the videobuf layerJonathan Corbet2-96/+371
Videobuf is a moderately complex API which most V4L2 drivers should use, but its documentation is...sparse. This document attempts to improve the situation. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Reviewed-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: media-spec: Fix documentation mistakes regarding I/O streamingHans Verkuil4-44/+42
The media spec contains several errors in the description of the I/O streaming ioctls, in particular with respect to the userptr I/O method. The most important change is that you really need to set count and index in v4l2_requestbuffer and v4l2_buffer when dealing with user pointer streaming. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: saa7115: fix saa7111a supportHans Verkuil3-14/+20
When the saa7111 driver was merged into saa7115 several bugs were introduced, in particular with the saa7111a support as is used in the mxb.c driver. This patch fixes the saa7111a support. This was tested with the mxb driver. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: saa7146_vv: fix regression where v4l2_device was registered too lateHans Verkuil5-7/+22
v4l2_device_register needs to be called before the i2c subdevs are loaded. However, it was called afterwards in the saa7146 driver. This caused an oops when loading the mxb and hexium drivers. The vv_init function is now split into two: one registers the v4l2_device, the other does the rest of the initialization. The three drivers that depend on this have been updated to call the new vv_devinit function. Thanks to Michael Hunold for reporting this. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: uvcvideo: Check uvc_ctrl_begin return value in VIDIOC_S_CTRLLaurent Pinchart1-1/+1
The function return value wasn't checked due to a missing variable assignment. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: uvcvideo: Blacklist gain control for Asus EeePC T91 integrated webcamLaurent Pinchart1-0/+1
The Asus EeePC T91 integrated webcam exposes a gain control in the processing unit but stalls when the control is queried. Blacklist the gain control for that camera. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: uvcvideo: Clamp control values to the minimum and maximum valuesLaurent Pinchart2-4/+45
When setting a control, the V4L2 specification requires drivers to either clamp the control value to the [minimum, maximum] range or return the -ERANGE error. Fix the driver to clamp control values to the valid range in uvc_ctrl_set() and make sure the value differs from the minimum by an integer multiple of step. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: uvcvideo: Cache control min, max, res and def query resultsLaurent Pinchart2-49/+74
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: uvcvideo: Return -ERANGE when setting a control to an out-of-range ↵Laurent Pinchart1-1/+1
menu index The V4L2 specification states that out of bounds control values must either be clamped to the valid range or result in a -ERANGE error code. Fix the driver to return -ERANGE instead of -EINVAL when setting a menu control to an invalid value. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: uvcvideo: Use %pUl printk format specifier to print GUIDsLaurent Pinchart3-55/+36
Replace the UVC_GUID_FORMAT and UVC_GUID_ARGS macros with the new %pUl printk format specifier. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 01:37:49 +0000