summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-02-01soc: qcom: smd-rpm: Add sdm660 compatibleCraig Tatlor2-0/+2
Add the compatible for the RPM in SDM660, so that rpm resources can be made available. Signed-off-by: Craig Tatlor <ctatlor97@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-02-01soc: qcom: gsbi: Fix error handling in gsbi_probe()Alexey Khoroshilov1-2/+5
If of_platform_populate() fails in gsbi_probe(), gsbi->hclk is left undisabled. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-02-01soc: qcom: rpmh: Avoid accessing freed memory from batch APIStephen Boyd1-13/+21
Using the batch API from the interconnect driver sometimes leads to a KASAN error due to an access to freed memory. This is easier to trigger with threadirqs on the kernel commandline. BUG: KASAN: use-after-free in rpmh_tx_done+0x114/0x12c Read of size 1 at addr fffffff51414ad84 by task irq/110-apps_rs/57 CPU: 0 PID: 57 Comm: irq/110-apps_rs Tainted: G W 4.19.10 #72 Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0xcc/0x10c print_address_description+0x74/0x240 kasan_report+0x250/0x26c __asan_report_load1_noabort+0x20/0x2c rpmh_tx_done+0x114/0x12c tcs_tx_done+0x450/0x768 irq_forced_thread_fn+0x58/0x9c irq_thread+0x120/0x1dc kthread+0x248/0x260 ret_from_fork+0x10/0x18 Allocated by task 385: kasan_kmalloc+0xac/0x148 __kmalloc+0x170/0x1e4 rpmh_write_batch+0x174/0x540 qcom_icc_set+0x8dc/0x9ac icc_set+0x288/0x2e8 a6xx_gmu_stop+0x320/0x3c0 a6xx_pm_suspend+0x108/0x124 adreno_suspend+0x50/0x60 pm_generic_runtime_suspend+0x60/0x78 __rpm_callback+0x214/0x32c rpm_callback+0x54/0x184 rpm_suspend+0x3f8/0xa90 pm_runtime_work+0xb4/0x178 process_one_work+0x544/0xbc0 worker_thread+0x514/0x7d0 kthread+0x248/0x260 ret_from_fork+0x10/0x18 Freed by task 385: __kasan_slab_free+0x12c/0x1e0 kasan_slab_free+0x10/0x1c kfree+0x134/0x588 rpmh_write_batch+0x49c/0x540 qcom_icc_set+0x8dc/0x9ac icc_set+0x288/0x2e8 a6xx_gmu_stop+0x320/0x3c0 a6xx_pm_suspend+0x108/0x124 adreno_suspend+0x50/0x60 cr50_spi spi5.0: SPI transfer timed out pm_generic_runtime_suspend+0x60/0x78 __rpm_callback+0x214/0x32c rpm_callback+0x54/0x184 rpm_suspend+0x3f8/0xa90 pm_runtime_work+0xb4/0x178 process_one_work+0x544/0xbc0 worker_thread+0x514/0x7d0 kthread+0x248/0x260 ret_from_fork+0x10/0x18 The buggy address belongs to the object at fffffff51414ac80 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 260 bytes inside of 512-byte region [fffffff51414ac80, fffffff51414ae80) The buggy address belongs to the page: page:ffffffbfd4505200 count:1 mapcount:0 mapping:fffffff51e00c680 index:0x0 compound_mapcount: 0 flags: 0x4000000000008100(slab|head) raw: 4000000000008100 ffffffbfd4529008 ffffffbfd44f9208 fffffff51e00c680 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: fffffff51414ac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fffffff51414ad00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >fffffff51414ad80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ fffffff51414ae00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fffffff51414ae80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc The batch API sets the same completion for each rpmh message that's sent and then loops through all the messages and waits for that single completion declared on the stack to be completed before returning from the function and freeing the message structures. Unfortunately, some messages may still be in process and 'stuck' in the TCS. At some later point, the tcs_tx_done() interrupt will run and try to process messages that have already been freed at the end of rpmh_write_batch(). This will in turn access the 'needs_free' member of the rpmh_request structure and cause KASAN to complain. Furthermore, if there's a message that's completed in rpmh_tx_done() and freed immediately after the complete() call is made we'll be racing with potentially freed memory when accessing the 'needs_free' member: CPU0 CPU1 ---- ---- rpmh_tx_done() complete(&compl) wait_for_completion(&compl) kfree(rpm_msg) if (rpm_msg->needs_free) <KASAN warning splat> Let's fix this by allocating a chunk of completions for each message and waiting for all of them to be completed before returning from the batch API. Alternatively, we could wait for the last message in the batch, but that may be a more complicated change because it looks like tcs_tx_done() just iterates through the indices of the queue and completes each message instead of tracking the last inserted message and completing that first. Fixes: c8790cb6da58 ("drivers: qcom: rpmh: add support for batch RPMH request") Cc: Lina Iyer <ilina@codeaurora.org> Cc: "Raju P.L.S.S.S.N" <rplsssn@codeaurora.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Evan Green <evgreen@chromium.org> Cc: stable@vger.kernel.org Reviewed-by: Lina Iyer <ilina@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-02-01drivers: qcom: rpmh: avoid sending sleep/wake sets immediatelyRaju P.L.S.S.S.N1-2/+1
Fix the redundant call being made to send the sleep and wake requests immediately to the controller. As per the patch [1], the sleep and wake request votes are cached in rpmh controller and sent during rpmh_flush(). These requests needs to be sent only during entry of deeper system low power modes or suspend. [1] https://patchwork.kernel.org/patch/10477533/ Reviewed-by: Lina Iyer <ilina@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-02-01soc: qcom: rmtfs-mem: Make sysfs attributes world-readableEvan Green1-3/+3
In order to run an rmtfs daemon as an unprivileged user, that user would need access to the phys_addr and size sysfs attributes. Sharing these attributes with unprivileged users doesn't really leak anything sensitive, since if you have access to physical memory, the jig is up anyway. Make those attributes readable by all. Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Evan Green <evgreen@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-02-01soc: qcom: rmtfs-mem: Add class to enable ueventsEvan Green1-5/+21
Currently the qcom_rmtfs_memN devices are entirely invisible to the udev world. Add a class to the rmtfs device so that uevents fire when the device is added. Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Evan Green <evgreen@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22soc: qcom: update config dependencies for QCOM_RPMPDRajendra Nayak1-1/+1
Since QCOM_RPMPD is bool and it depends on QCOM_SMD_RPM which is tristate, configurations such as arm64:allmodconfig result in CONFIG_QCOM_RPMPD=y CONFIG_QCOM_SMD_RPM=m This in turn results in drivers/soc/qcom/rpmpd.o: In function `rpmpd_send_corner': rpmpd.c:(.text+0x10c): undefined reference to `qcom_rpm_smd_write' drivers/soc/qcom/rpmpd.o: In function `rpmpd_power_on': rpmpd.c:(.text+0x3b4): undefined reference to `qcom_rpm_smd_write' drivers/soc/qcom/rpmpd.o: In function `rpmpd_power_off': rpmpd.c:(.text+0x520): undefined reference to `qcom_rpm_smd_write' make: *** [vmlinux] Error 1 Fix it by making QCOM_RPMPD depend on QCOM_SMD_RPM=y Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22soc: qcom: rpmpd: Drop family A RPM dependencyBjorn Andersson2-7/+5
The MFD_QCOM_RPM is the RPM in family A, but the rpmpd driver only implements support for SMD based devices. Drop the dependency and remove includes of the family A headers. No functional change. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22MAINTAINERS: update list of qcom driversAmit Kucheria1-7/+25
Several drivers didn't have a specific maintainer (other than the subsystem maintainer). Add some generic regex patterns to capture most qcom drivers in the list of supported drivers. For the rest, add explicit filenames. Sort the entries, while we're at it. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22soc: qcom: rpmhpd: Mark mx as a parent for cxRajendra Nayak1-0/+11
Specify the active + sleep and active-only MX power domains as the parents of the corresponding CX power domains. This will ensure that performance state requests on CX automatically generate equivalent requests on MX power domains. This is used to enforce a requirement that exists for various hardware blocks on SDM845 that MX performance state >= CX performance state for a given operating frequency. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22soc: qcom: rpmhpd: Add RPMh power domain driverRajendra Nayak3-0/+405
The RPMh power domain driver aggregates the corner votes from various consumers for the ARC resources and communicates it to RPMh. With RPMh we use 2 different numbering space for corners, one used by the clients to express their performance needs, and another used to communicate to RPMh hardware. The clients express their performance requirements using a sparse numbering space which are mapped to meaningful levels like RET, SVS, NOMINAL, TURBO etc which then get mapped to another number space between 0 and 15 which is communicated to RPMh. The sparse number space, also referred to as vlvl is mapped to the continuous number space of 0 to 15, also referred to as hlvl, using command DB. Some power domain clients could request a performance state only while the CPU is active, while some others could request for a certain performance state all the time regardless of the state of the CPU. We handle this by internally aggregating the votes from both type of clients and then send the aggregated votes to RPMh. There are also 3 different types of votes that are comunicated to RPMh for every resource. 1. ACTIVE_ONLY: This specifies the requirement for the resource when the CPU is active 2. SLEEP: This specifies the requirement for the resource when the CPU is going to sleep 3. WAKE_ONLY: This specifies the requirement for the resource when the CPU is coming out of sleep to active state We add data for all power domains on sdm845 SoC as part of the patch. The driver can be extended to support other SoCs which support RPMh Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22soc: qcom: rpmpd: Add support for get/set performance stateRajendra Nayak1-0/+35
Add support for the .set_performace_state() and .opp_to_performance_state() callbacks in the rpmpd driver. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22soc: qcom: rpmpd: Add a Power domain driver to model cornersRajendra Nayak3-0/+292
The Power domains for corners just pass the performance state set by the consumers to the RPM (Remote Power manager) which then takes care of setting the appropriate voltage on the corresponding rails to meet the performance needs. We add all power domain data needed on msm8996 here. This driver can easily be extended by adding data for other qualcomm SoCs as well. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22dt-bindings: power: Add qcom rpm power domain driver bindingsRajendra Nayak2-0/+184
Add DT bindings to describe the rpm/rpmh power domains found on Qualcomm Technologies, Inc. SoCs. These power domains communicate a performance state to RPM/RPMh, which then translates it into corresponding voltage on a PMIC rail. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22OPP: Add support for parsing the 'opp-level' propertyRajendra Nayak4-0/+29
Now that the OPP bindings are updated to include an optional 'opp-level' property, add support to parse it from device tree and store it as part of dev_pm_opp structure. Also add and export an helper 'dev_pm_opp_get_level()' that can be used to get the level value read from device tree when present. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22dt-bindings: opp: Introduce opp-level bindingsRajendra Nayak1-0/+3
Add opp-level as an additional property in the OPP node to describe the performance level of the device. On some SoCs (especially from Qualcomm and MediaTek) this value is communicated to a remote microprocessor by the CPU, which then takes some actions (like adjusting voltage values across various rails) based on the value passed. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22Merge tag 'qcom-fixes-for-5.0-rc1' into drivers-for-5.1Andy Gross1-0/+1
Qualcomm Driver Fixes for 5.0-rc1 * Add required includes into qcom_scm.h
2019-01-10qcom-scm: Include <linux/err.h> headerFabio Estevam1-0/+1
Since commit e6f6d63ed14c ("drm/msm: add headless gpu device for imx5") the DRM_MSM symbol can be selected by SOC_IMX5 causing the following error when building imx_v6_v7_defconfig: In file included from ../drivers/gpu/drm/msm/adreno/a5xx_gpu.c:17:0: ../include/linux/qcom_scm.h: In function 'qcom_scm_set_cold_boot_addr': ../include/linux/qcom_scm.h:73:10: error: 'ENODEV' undeclared (first use in this function) return -ENODEV; Include the <linux/err.h> header file to fix this problem. Reported-by: kernelci.org bot <bot@kernelci.org> Fixes: e6f6d63ed14c ("drm/msm: add headless gpu device for imx5") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-06Linux 5.0-rc1v5.0-rc1Linus Torvalds1-3/+3
2019-01-06Merge tag 'kbuild-v4.21-3' of ↵Linus Torvalds94-694/+150
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - improve boolinit.cocci and use_after_iter.cocci semantic patches - fix alignment for kallsyms - move 'asm goto' compiler test to Kconfig and clean up jump_label CONFIG option - generate asm-generic wrappers automatically if arch does not implement mandatory UAPI headers - remove redundant generic-y defines - misc cleanups * tag 'kbuild-v4.21-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: rename generated .*conf-cfg to *conf-cfg kbuild: remove unnecessary stubs for archheader and archscripts kbuild: use assignment instead of define ... endef for filechk_* rules arch: remove redundant UAPI generic-y defines kbuild: generate asm-generic wrappers if mandatory headers are missing arch: remove stale comments "UAPI Header export list" riscv: remove redundant kernel-space generic-y kbuild: change filechk to surround the given command with { } kbuild: remove redundant target cleaning on failure kbuild: clean up rule_dtc_dt_yaml kbuild: remove UIMAGE_IN and UIMAGE_OUT jump_label: move 'asm goto' support test to Kconfig kallsyms: lower alignment on ARM scripts: coccinelle: boolinit: drop warnings on named constants scripts: coccinelle: check for redeclaration kconfig: remove unused "file" field of yylval union nds32: remove redundant kernel-space generic-y nios2: remove unneeded HAS_DMA define
2019-01-06Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds27-166/+620
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling updates form Ingo Molnar: "A final batch of perf tooling changes: mostly fixes and small improvements" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits) perf session: Add comment for perf_session__register_idle_thread() perf thread-stack: Fix thread stack processing for the idle task perf thread-stack: Allocate an array of thread stacks perf thread-stack: Factor out thread_stack__init() perf thread-stack: Allow for a thread stack array perf thread-stack: Avoid direct reference to the thread's stack perf thread-stack: Tidy thread_stack__bottom() usage perf thread-stack: Simplify some code in thread_stack__process() tools gpio: Allow overriding CFLAGS tools power turbostat: Override CFLAGS assignments and add LDFLAGS to build command tools thermal tmon: Allow overriding CFLAGS assignments tools power x86_energy_perf_policy: Override CFLAGS assignments and add LDFLAGS to build command perf c2c: Increase the HITM ratio limit for displayed cachelines perf c2c: Change the default coalesce setup perf trace beauty ioctl: Beautify USBDEVFS_ commands perf trace beauty: Export function to get the files for a thread perf trace: Wire up ioctl's USBDEBFS_ cmd table generator perf beauty ioctl: Add generator for USBDEVFS_ ioctl commands tools headers uapi: Grab a copy of usbdevice_fs.h perf trace: Store the major number for a file when storing its pathname ...
2019-01-06Change mincore() to count "mapped" pages rather than "cached" pagesLinus Torvalds1-81/+13
The semantics of what "in core" means for the mincore() system call are somewhat unclear, but Linux has always (since 2.3.52, which is when mincore() was initially done) treated it as "page is available in page cache" rather than "page is mapped in the mapping". The problem with that traditional semantic is that it exposes a lot of system cache state that it really probably shouldn't, and that users shouldn't really even care about. So let's try to avoid that information leak by simply changing the semantics to be that mincore() counts actual mapped pages, not pages that might be cheaply mapped if they were faulted (note the "might be" part of the old semantics: being in the cache doesn't actually guarantee that you can access them without IO anyway, since things like network filesystems may have to revalidate the cache before use). In many ways the old semantics were somewhat insane even aside from the information leak issue. From the very beginning (and that beginning is a long time ago: 2.3.52 was released in March 2000, I think), the code had a comment saying Later we can get more picky about what "in core" means precisely. and this is that "later". Admittedly it is much later than is really comfortable. NOTE! This is a real semantic change, and it is for example known to change the output of "fincore", since that program literally does a mmmap without populating it, and then doing "mincore()" on that mapping that doesn't actually have any pages in it. I'm hoping that nobody actually has any workflow that cares, and the info leak is real. We may have to do something different if it turns out that people have valid reasons to want the old semantics, and if we can limit the information leak sanely. Cc: Kevin Easton <kevin@guarana.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Masatake YAMATO <yamato@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-06Fix 'acccess_ok()' on alpha and SHLinus Torvalds2-5/+10
Commit 594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'") broke both alpha and SH booting in qemu, as noticed by Guenter Roeck. It turns out that the bug wasn't actually in that commit itself (which would have been surprising: it was mostly a no-op), but in how the addition of access_ok() to the strncpy_from_user() and strnlen_user() functions now triggered the case where those functions would test the access of the very last byte of the user address space. The string functions actually did that user range test before too, but they did it manually by just comparing against user_addr_max(). But with user_access_begin() doing the check (using "access_ok()"), it now exposed problems in the architecture implementations of that function. For example, on alpha, the access_ok() helper macro looked like this: #define __access_ok(addr, size) \ ((get_fs().seg & (addr | size | (addr+size))) == 0) and what it basically tests is of any of the high bits get set (the USER_DS masking value is 0xfffffc0000000000). And that's completely wrong for the "addr+size" check. Because it's off-by-one for the case where we check to the very end of the user address space, which is exactly what the strn*_user() functions do. Why? Because "addr+size" will be exactly the size of the address space, so trying to access the last byte of the user address space will fail the __access_ok() check, even though it shouldn't. As a result, the user string accessor functions failed consistently - because they literally don't know how long the string is going to be, and the max access is going to be that last byte of the user address space. Side note: that alpha macro is buggy for another reason too - it re-uses the arguments twice. And SH has another version of almost the exact same bug: #define __addr_ok(addr) \ ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg) so far so good: yes, a user address must be below the limit. But then: #define __access_ok(addr, size) \ (__addr_ok((addr) + (size))) is wrong with the exact same off-by-one case: the case when "addr+size" is exactly _equal_ to the limit is actually perfectly fine (think "one byte access at the last address of the user address space") The SH version is actually seriously buggy in another way: it doesn't actually check for overflow, even though it did copy the _comment_ that talks about overflow. So it turns out that both SH and alpha actually have completely buggy implementations of access_ok(), but they happened to work in practice (although the SH overflow one is a serious serious security bug, not that anybody likely cares about SH security). This fixes the problems by using a similar macro on both alpha and SH. It isn't trying to be clever, the end address is based on this logic: unsigned long __ao_end = __ao_a + __ao_b - !!__ao_b; which basically says "add start and length, and then subtract one unless the length was zero". We can't subtract one for a zero length, or we'd just hit an underflow instead. For a lot of access_ok() users the length is a constant, so this isn't actually as expensive as it initially looks. Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-06Merge tag 'fscrypt_for_linus' of ↵Linus Torvalds7-188/+468
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt Pull fscrypt updates from Ted Ts'o: "Add Adiantum support for fscrypt" * tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: fscrypt: add Adiantum support
2019-01-06Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds4-10/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bug fixes from Ted Ts'o: "Fix a number of ext4 bugs" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix special inode number checks in __ext4_iget() ext4: track writeback errors using the generic tracking infrastructure ext4: use ext4_write_inode() when fsyncing w/o a journal ext4: avoid kernel warning when writing the superblock to a dead device ext4: fix a potential fiemap/page fault deadlock w/ inline_data ext4: make sure enough credits are reserved for dioread_nolock writes
2019-01-06Merge tag 'dma-mapping-4.21-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds8-275/+215
Pull dma-mapping fixes from Christoph Hellwig: "Fix various regressions introduced in this cycles: - fix dma-debug tracking for the map_page / map_single consolidatation - properly stub out DMA mapping symbols for !HAS_DMA builds to avoid link failures - fix AMD Gart direct mappings - setup the dma address for no kernel mappings using the remap allocator" * tag 'dma-mapping-4.21-1' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING for remapped allocations x86/amd_gart: fix unmapping of non-GART mappings dma-mapping: remove a few unused exports dma-mapping: properly stub out the DMA API for !CONFIG_HAS_DMA dma-mapping: remove dmam_{declare,release}_coherent_memory dma-mapping: implement dmam_alloc_coherent using dmam_alloc_attrs dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs
2019-01-06Merge tag 'tag-chrome-platform-for-v4.21' of ↵Linus Torvalds3-8/+31
git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform updates from Benson Leung: - Changes for EC_MKBP_EVENT_SENSOR_FIFO handling. - Also, maintainership changes. Olofj out, Enric balletbo in. * tag 'tag-chrome-platform-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: MAINTAINERS: add maintainers for ChromeOS EC sub-drivers MAINTAINERS: platform/chrome: Add Enric as a maintainer MAINTAINERS: platform/chrome: remove myself as maintainer platform/chrome: don't report EC_MKBP_EVENT_SENSOR_FIFO as wakeup platform/chrome: straighten out cros_ec_get_{next,host}_event() error codes
2019-01-06Merge tag 'hwlock-v4.21' of git://github.com/andersson/remoteprocLinus Torvalds4-0/+189
Pull hwspinlock updates from Bjorn Andersson: "This adds support for the hardware semaphores found in STM32MP1" * tag 'hwlock-v4.21' of git://github.com/andersson/remoteproc: hwspinlock: fix return value check in stm32_hwspinlock_probe() hwspinlock: add STM32 hwspinlock device dt-bindings: hwlock: Document STM32 hwspinlock bindings
2019-01-06fscrypt: add Adiantum supportEric Biggers7-188/+468
Add support for the Adiantum encryption mode to fscrypt. Adiantum is a tweakable, length-preserving encryption mode with security provably reducible to that of XChaCha12 and AES-256, subject to a security bound. It's also a true wide-block mode, unlike XTS. See the paper "Adiantum: length-preserving encryption for entry-level processors" (https://eprint.iacr.org/2018/720.pdf) for more details. Also see commit 059c2a4d8e16 ("crypto: adiantum - add Adiantum support"). On sufficiently long messages, Adiantum's bottlenecks are XChaCha12 and the NH hash function. These algorithms are fast even on processors without dedicated crypto instructions. Adiantum makes it feasible to enable storage encryption on low-end mobile devices that lack AES instructions; currently such devices are unencrypted. On ARM Cortex-A7, on 4096-byte messages Adiantum encryption is about 4 times faster than AES-256-XTS encryption; decryption is about 5 times faster. In fscrypt, Adiantum is suitable for encrypting both file contents and names. With filenames, it fixes a known weakness: when two filenames in a directory share a common prefix of >= 16 bytes, with CTS-CBC their encrypted filenames share a common prefix too, leaking information. Adiantum does not have this problem. Since Adiantum also accepts long tweaks (IVs), it's also safe to use the master key directly for Adiantum encryption rather than deriving per-file keys, provided that the per-file nonce is included in the IVs and the master key isn't used for any other encryption mode. This configuration saves memory and improves performance. A new fscrypt policy flag is added to allow users to opt-in to this configuration. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-01-05Merge tag 'docs-5.0-fixes' of git://git.lwn.net/linuxLinus Torvalds5-10/+4
Pull documentation fixes from Jonathan Corbet: "A handful of late-arriving documentation fixes" * tag 'docs-5.0-fixes' of git://git.lwn.net/linux: doc: filesystems: fix bad references to nonexistent ext4.rst file Documentation/admin-guide: update URL of LKML information link Docs/kernel-api.rst: Remove blk-tag.c reference
2019-01-05Merge tag 'firewire-update' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fixlet from Stefan Richter: "Remove an explicit dependency in Kconfig which is implied by another dependency" * tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: Remove depends on HAS_DMA in case of platform dependency
2019-01-05Merge tag 'for-linus-20190104' of git://git.kernel.dk/linux-blockLinus Torvalds8-97/+101
Pull block updates and fixes from Jens Axboe: - Pulled in MD changes that Shaohua had queued up for 4.21. Unfortunately we lost Shaohua late 2018, I'm sending these in on his behalf. - In conjunction with the above, I added a CREDITS entry for Shaoua. - sunvdc queue restart fix (Ming) * tag 'for-linus-20190104' of git://git.kernel.dk/linux-block: Add CREDITS entry for Shaohua Li block: sunvdc: don't run hw queue synchronously from irq context md: fix raid10 hang issue caused by barrier raid10: refactor common wait code from regular read/write request md: remvoe redundant condition check lib/raid6: add option to skip algo benchmarking lib/raid6: sort algos in rough performance order lib/raid6: check for assembler SSSE3 support lib/raid6: avoid __attribute_const__ redefinition lib/raid6: add missing include for raid6test md: remove set but not used variable 'bi_rdev'
2019-01-05Merge tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drmLinus Torvalds51-290/+628
Pull drm fixes from Dave Airlie: "Happy New Year, just decloaking from leave to get some stuff from the last week in before rc1: core: - two regression fixes for damage blob and atomic i915 gvt: - Some missed GVT fixes from the original pull amdgpu: - new PCI IDs - SR-IOV fixes - DC fixes - Vega20 fixes" * tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drm: (53 commits) drm: Put damage blob when destroy plane state drm: fix null pointer dereference on null state pointer drm/amdgpu: Add new VegaM pci id drm/ttm: Use drm_debug_printer for all ttm_bo_mem_space_debug output drm/amdgpu: add Vega20 PSP ASD firmware loading drm/amd/display: Fix MST dp_blank REG_WAIT timeout drm/amd/display: validate extended dongle caps drm/amd/display: Use div_u64 for flip timestamp ns to ms drm/amdgpu/uvd:Change uvd ring name convention drm/amd/powerplay: add Vega20 LCLK DPM level setting support drm/amdgpu: print process info when job timeout drm/amdgpu/nbio7.4: add hw bug workaround for vega20 drm/amdgpu/nbio6.1: add hw bug workaround for vega10/12 drm/amd/display: Optimize passive update planes. drm/amd/display: verify lane status before exiting verify link cap drm/amd/display: Fix bug with not updating VSP infoframe drm/amd/display: Add retry to read ddc_clock pin drm/amd/display: Don't skip link training for empty dongle drm/amd/display: Wait edp HPD to high in detect_sink drm/amd/display: fix surface update sequence ...
2019-01-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds6-21/+10
Pull rdma fixes from Jason Gunthorpe: "Over the break a few defects were found, so this is a -rc style pull request of various small things that have been posted. - An attempt to shorten RCU grace period driven delays showed crashes during heavier testing, and has been entirely reverted - A missed merge/rebase error between the advise_mr and ib_device_ops series - Some small static analysis driven fixes from Julia and Aditya - Missed ability to create a XRC_INI in the devx verbs interop series" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: infiniband/qedr: Potential null ptr dereference of qp infiniband: bnxt_re: qplib: Check the return value of send_message IB/ipoib: drop useless LIST_HEAD IB/core: Add advise_mr to the list of known ops Revert "IB/mlx5: Fix long EEH recover time with NVMe offloads" IB/mlx5: Allow XRC INI usage via verbs in DEVX context
2019-01-05Merge tag 'fbdev-v4.21' of git://github.com/bzolnier/linuxLinus Torvalds15-47/+71
Pull fbdev updates from Bartlomiej Zolnierkiewicz: "This time the pull request is really small. The most notable changes are fixing fbcon to not cause crash on unregister_framebuffer() operation when there is more than one framebuffer, adding config option to center the bootup logo and making FB_BACKLIGHT config option tristate (which in turn uncovered incorrect FB_BACKLIGHT usage by DRM's nouveau driver). Summary: - fix fbcon to not cause crash on unregister_framebuffer() when there is more than one framebuffer (Noralf Trønnes) - improve support for small rotated displays (Peter Rosin) - fix probe failure handling in udlfb driver (Dan Carpenter) - add config option to center the bootup logo (Peter Rosin) - make FB_BACKLIGHT config option tristate (Rob Clark) - remove superfluous HAS_DMA dependency for goldfishfb driver (Geert Uytterhoeven) - misc fixes (Alexey Khoroshilov, YueHaibing, Colin Ian King, Lubomir Rintel) - misc cleanups (Yangtao Li, Wen Yang) also there is DRM's nouveau driver fix for wrong FB_BACKLIGHT config option usage (FB_BACKLIGHT is for internal fbdev subsystem use only)" * tag 'fbdev-v4.21' of git://github.com/bzolnier/linux: drm/nouveau: fix incorrect FB_BACKLIGHT usage in Kconfig fbdev: fbcon: Fix unregister crash when more than one framebuffer fbdev: Remove depends on HAS_DMA in case of platform dependency pxa168fb: trivial typo fix fbdev: fsl-diu: remove redundant null check on cmap fbdev: omap2: omapfb: convert to DEFINE_SHOW_ATTRIBUTE fbdev: uvesafb: fix spelling mistake "memoery" -> "memory" fbdev: fbmem: add config option to center the bootup logo fbdev: fbmem: make fb_show_logo_line return the end instead of the height video: fbdev: pxafb: Fix "WARNING: invalid free of devm_ allocated data" fbdev: fbmem: behave better with small rotated displays and many CPUs video: clps711x-fb: release disp device node in probe() fbdev: make FB_BACKLIGHT a tristate udlfb: fix some inconsistent NULL checking
2019-01-05Merge branch 'i2c/for-5.0' of ↵Linus Torvalds22-137/+346
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has only driver updates for you this time. Mostly new IDs/DT compatibles, also SPDX conversions, small cleanups. STM32F7 got FastMode+ and PM support, Axxia some reliabilty improvements" * 'i2c/for-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (26 commits) i2c: Add Actions Semiconductor Owl family S700 I2C support dt-bindings: i2c: Add S700 support for Actions Semi Soc's i2c: ismt: Add support for Intel Cedar Fork i2c: tegra: Switch to SPDX identifier i2c: tegra: Add missing kerneldoc for some fields i2c: tegra: Cleanup kerneldoc comments i2c: axxia: support sequence command mode dt-bindings: i2c: rcar: Add r8a774c0 support dt-bindings: i2c: sh_mobile: Add r8a774c0 support i2c: sh_mobile: Add support for r8a774c0 (RZ/G2E) i2c: i2c-cros-ec-tunnel: Switch to SPDX identifier. i2c: powermac: Use of_node_name_eq for node name comparisons i2c-axxia: check for error conditions first i2c-axxia: dedicated function to set client addr dt-bindings: i2c: Use correct vendor prefix for Atmel i2c: tegra: replace spin_lock_irqsave with spin_lock in ISR eeprom: at24: add support for 24c2048 dt-bindings: eeprom: at24: add "atmel,24c2048" compatible string i2c: i2c-stm32f7: add PM Runtime support i2c: sh_mobile: add support for r8a77990 (R-Car E3) ...
2019-01-05Merge tag 'pci-v4.21-changes' of ↵Linus Torvalds37-210/+1721
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Remove unused lists from ASPM pcie_link_state (Frederick Lawler) - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian King) - Expand Kconfig "PF" acronyms (Randy Dunlap) - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas) - Add missing include to drivers/pci.h (Alexandru Gagniuc) - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it instead of xhci (Thinh Nguyen) - Clean up P2PDMA documentation (Randy Dunlap) - Allow runtime PM even if driver doesn't supply callbacks (Jarkko Nikula) - Remove status check after submitting Switchtec MRPC Firmware Download commands to avoid Completion Timeouts (Kelvin Cao) - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher) - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue (Joey Zhang) - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao) - Add Switchtec MRPC DMA mode support (Wesley Sheng) - Skip VF scanning on powerpc, which does this in firmware (Sebastian Ott) - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang) - Constify histb dw_pcie_host_ops structure (Julia Lawall) - Support multiple power domains for imx6 (Leonard Crestez) - Constify layerscape driver data (Stefan Agner) - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho) - Support armada8k GPIO reset (Baruch Siach) - Support suspend/resume support on imx6 (Leonard Crestez) - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren) - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov) - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi) - Mask DesignWare interrupts instead of disabling them to avoid lost interrupts (Marc Zyngier) - Add locking when acking DesignWare interrupts (Marc Zyngier) - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier) - Use devm resource parser in mediatek (Honghui Zhang) - Remove unused mediatek "num-lanes" DT property (Honghui Zhang) - Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi) - Enable MSI for imx6 downstream components (Richard Zhu) * tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits) PCI: imx: Enable MSI from downstream components s390/pci: skip VF scanning PCI/IOV: Add flag so platforms can skip VF scanning PCI/IOV: Factor out sriov_add_vfs() PCI: uniphier: Add UniPhier PCIe host controller support dt-bindings: PCI: Add UniPhier PCIe host controller description PCI: amlogic: Add the Amlogic Meson PCIe controller driver dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller arm64: dts: mt7622: Remove un-used property for PCIe arm: dts: mt7623: Remove un-used property for PCIe dt-bindings: PCI: MediaTek: Remove un-used property PCI: mediatek: Remove un-used variant in struct mtk_pcie_port MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry PCI: dwc: Don't hard-code DBI/ATU offset PCI: imx: Add imx6sx suspend/resume support PCI: armada8k: Add support for gpio controlled reset signal PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 PCI: dwc: layerscape: Constify driver data PCI: imx: Add multi-pd support PCI: Override Synopsys USB 3.x HAPS device class ...
2019-01-05Merge branch 'for-linus' of ↵Linus Torvalds17-61/+720
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - high-resolution scrolling support that gracefully handles differences between MS and Logitech implementations in HW, from Peter Hutterer and Harry Cutts - MSI IRQ support for intel-ish driver, from Song Hongyan - support for new hardware (Cougar 700K, Odys Winbook 13, ASUS FX503VD, ASUS T101HA) from Daniel M. Lambea, Hans de Goede and Aleix Roca Nonell - other small assorted fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (22 commits) HID: i2c-hid: Add Odys Winbook 13 to descriptor override HID: lenovo: Add checks to fix of_led_classdev_register HID: intel-ish-hid: add MSI interrupt support HID: debug: Change to use DEFINE_SHOW_ATTRIBUTE macro HID: doc: fix wrong data structure reference for UHID_OUTPUT HID: intel-ish-hid: fixes incorrect error handling HID: asus: Add support for the ASUS T101HA keyboard dock HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice HID: logitech: Enable high-resolution scrolling on Logitech mice HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration" HID: logitech-hidpp: fix typo, hiddpp to hidpp HID: input: use the Resolution Multiplier for high-resolution scrolling HID: core: process the Resolution Multiplier HID: core: store the collections as a basic tree Input: add `REL_WHEEL_HI_RES` and `REL_HWHEEL_HI_RES` HID: input: support Microsoft wireless radio control hotkey HID: use macros in IS_INPUT_APPLICATION HID: asus: Add support for the ASUS FX503VD laptop HID: asus: Add event handler to catch unmapped Asus Vendor UsagePage codes HID: cougar: Add support for Cougar 700K Gaming Keyboard ...
2019-01-05Merge branch 'for-linus' of ↵Linus Torvalds2-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatch update from Jiri Kosina: "Return value checking fixup in livepatching samples, from Nicholas Mc Guire" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: check kzalloc return values
2019-01-06kconfig: rename generated .*conf-cfg to *conf-cfgMasahiro Yamada2-18/+19
Remove the dot-prefixing since it is just a matter of the .gitignore file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06kbuild: remove unnecessary stubs for archheader and archscriptsMasahiro Yamada1-5/+1
Make simply skips a missing rule when it is marked as .PHONY. Remove the dummy targets. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06kbuild: use assignment instead of define ... endef for filechk_* rulesMasahiro Yamada6-26/+12
You do not have to use define ... endef for filechk_* rules. For simple cases, the use of assignment looks cleaner, IMHO. I updated the usage for scripts/Kbuild.include in case somebody misunderstands the 'define ... endif' is the requirement. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-01-06arch: remove redundant UAPI generic-y definesMasahiro Yamada24-408/+0
Now that Kbuild automatically creates asm-generic wrappers for missing mandatory headers, it is redundant to list the same headers in generic-y and mandatory-y. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2019-01-06kbuild: generate asm-generic wrappers if mandatory headers are missingMasahiro Yamada3-10/+10
Some time ago, Sam pointed out a certain degree of overwrap between generic-y and mandatory-y. (https://lkml.org/lkml/2017/7/10/121) I tweaked the meaning of mandatory-y a little bit; now it defines the minimum set of ASM headers that all architectures must have. If arch does not have specific implementation of a mandatory header, Kbuild will let it fallback to the asm-generic one by automatically generating a wrapper. This will allow to drop lots of redundant generic-y defines. Previously, "mandatory" was used in the context of UAPI, but I guess this can be extended to kernel space ASM headers. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2019-01-06arch: remove stale comments "UAPI Header export list"Masahiro Yamada24-25/+0
These comments are leftovers of commit fcc8487d477a ("uapi: export all headers under uapi directories"). Prior to that commit, exported headers must be explicitly added to header-y. Now, all headers under the uapi/ directories are exported. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06riscv: remove redundant kernel-space generic-yMasahiro Yamada1-25/+0
This commit removes redundant generic-y defines in arch/riscv/include/asm/Kbuild. [1] It is redundant to define the same generic-y in both arch/$(ARCH)/include/asm/Kbuild and arch/$(ARCH)/include/uapi/asm/Kbuild. Remove the following generic-y: errno.h fcntl.h ioctl.h ioctls.h ipcbuf.h mman.h msgbuf.h param.h poll.h posix_types.h resource.h sembuf.h setup.h shmbuf.h signal.h socket.h sockios.h stat.h statfs.h swab.h termbits.h termios.h types.h [2] It is redundant to define generic-y when arch-specific implementation exists in arch/$(ARCH)/include/asm/*.h Remove the following generic-y: cacheflush.h module.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06kbuild: change filechk to surround the given command with { }Masahiro Yamada7-12/+14
filechk_* rules often consist of multiple 'echo' lines. They must be surrounded with { } or ( ) to work correctly. Otherwise, only the string from the last 'echo' would be written into the target. Let's take care of that in the 'filechk' in scripts/Kbuild.include to clean up filechk_* rules. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06kbuild: remove redundant target cleaning on failureMasahiro Yamada9-25/+16
Since commit 9c2af1c7377a ("kbuild: add .DELETE_ON_ERROR special target"), the target file is automatically deleted on failure. The boilerplate code ... || { rm -f $@; false; } is unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06kbuild: clean up rule_dtc_dt_yamlMasahiro Yamada1-2/+2
Commit 3a2429e1faf4 ("kbuild: change if_changed_rule for multi-line recipe") and commit 4f0e3a57d6eb ("kbuild: Add support for DT binding schema checks") came in via different sub-systems. This is a follow-up cleanup. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06kbuild: remove UIMAGE_IN and UIMAGE_OUTMasahiro Yamada1-4/+2
The only/last user of UIMAGE_IN/OUT was removed by commit 4722a3e6b716 ("microblaze: fix multiple bugs in arch/microblaze/boot/Makefile"). The input and output should always be $< and $@. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 14:36:25 +0000