summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-01-20powerpc/64s: fix scv entry fallback flush vs interruptNicholas Piggin6-4/+71
The L1D flush fallback functions are not recoverable vs interrupts, yet the scv entry flush runs with MSR[EE]=1. This can result in a timer (soft-NMI) or MCE or SRESET interrupt hitting here and overwriting the EXRFI save area, which ends up corrupting userspace registers for scv return. Fix this by disabling RI and EE for the scv entry fallback flush. Fixes: f79643787e0a0 ("powerpc/64s: flush L1D on kernel entry") Cc: stable@vger.kernel.org # 5.9+ which also have flush L1D patch backport Reported-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210111062408.287092-1-npiggin@gmail.com
2021-01-19tcp: fix TCP socket rehash stats mis-accountingYuchung Cheng3-22/+22
The previous commit 32efcc06d2a1 ("tcp: export count for rehash attempts") would mis-account rehashing SNMP and socket stats: a. During handshake of an active open, only counts the first SYN timeout b. After handshake of passive and active open, stop updating after (roughly) TCP_RETRIES1 recurring RTOs c. After the socket aborts, over count timeout_rehash by 1 This patch fixes this by checking the rehash result from sk_rethink_txhash. Fixes: 32efcc06d2a1 ("tcp: export count for rehash attempts") Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Link: https://lore.kernel.org/r/20210119192619.1848270-1-ycheng@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19net: dsa: b53: fix an off by one in checking "vlan->vid"Dan Carpenter1-1/+1
The > comparison should be >= to prevent accessing one element beyond the end of the dev->vlans[] array in the caller function, b53_vlan_add(). The "dev->vlans" array is allocated in the b53_switch_init() function and it has "dev->num_vlans" elements. Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/YAbxI97Dl/pmBy5V@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19tcp: do not mess with cloned skbs in tcp_add_backlog()Eric Dumazet1-12/+13
Heiner Kallweit reported that some skbs were sent with the following invalid GSO properties : - gso_size > 0 - gso_type == 0 This was triggerring a WARN_ON_ONCE() in rtl8169_tso_csum_v2. Juerg Haefliger was able to reproduce a similar issue using a lan78xx NIC and a workload mixing TCP incoming traffic and forwarded packets. The problem is that tcp_add_backlog() is writing over gso_segs and gso_size even if the incoming packet will not be coalesced to the backlog tail packet. While skb_try_coalesce() would bail out if tail packet is cloned, this overwriting would lead to corruptions of other packets cooked by lan78xx, sharing a common super-packet. The strategy used by lan78xx is to use a big skb, and split it into all received packets using skb_clone() to avoid copies. The drawback of this strategy is that all the small skb share a common struct skb_shared_info. This patch rewrites TCP gso_size/gso_segs handling to only happen on the tail skb, since skb_try_coalesce() made sure it was not cloned. Fixes: 4f693b55c3d2 ("tcp: implement coalescing on backlog queue") Signed-off-by: Eric Dumazet <edumazet@google.com> Bisected-by: Juerg Haefliger <juergh@canonical.com> Tested-by: Juerg Haefliger <juergh@canonical.com> Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209423 Link: https://lore.kernel.org/r/20210119164900.766957-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19selftests: net: fib_tests: remove duplicate log testHangbin Liu1-1/+0
The previous test added an address with a specified metric and check if correspond route was created. I somehow added two logs for the same test. Remove the duplicated one. Reported-by: Antoine Tenart <atenart@redhat.com> Fixes: 0d29169a708b ("selftests/net/fib_tests: update addr_metric_test for peer route testing") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20210119025930.2810532-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20selftests/powerpc: Only test lwm/stmw on big endianMichael Ellerman1-1/+4
Newer binutils (>= 2.36) refuse to assemble lmw/stmw when building in little endian mode. That breaks compilation of our alignment handler test: /tmp/cco4l14N.s: Assembler messages: /tmp/cco4l14N.s:1440: Error: `lmw' invalid when little-endian /tmp/cco4l14N.s:1814: Error: `stmw' invalid when little-endian make[2]: *** [../../lib.mk:139: /output/kselftest/powerpc/alignment/alignment_handler] Error 1 These tests do pass on little endian machines, as the kernel will still emulate those instructions even when running little endian (which is arguably a kernel bug). But we don't really need to test that case, so ifdef those instructions out to get the alignment test building again. Reported-by: Libor Pechacek <lpechacek@suse.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Libor Pechacek <lpechacek@suse.com> Link: https://lore.kernel.org/r/20210119041800.3093047-1-mpe@ellerman.id.au
2021-01-19net: nfc: nci: fix the wrong NCI_CORE_INIT parametersBongsu Jeon1-1/+1
Fix the code because NCI_CORE_INIT_CMD includes two parameters in NCI2.0 but there is no parameters in NCI1.x. Fixes: bcd684aace34 ("net/nfc/nci: Support NCI 2.x initial sequence") Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Link: https://lore.kernel.org/r/20210118205522.317087-1-bongsu.jeon@samsung.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19sh_eth: Fix power down vs. is_opened flag orderingGeert Uytterhoeven1-2/+2
sh_eth_close() does a synchronous power down of the device before marking it closed. Revert the order, to make sure the device is never marked opened while suspended. While at it, use pm_runtime_put() instead of pm_runtime_put_sync(), as there is no reason to do a synchronous power down. Fixes: 7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210118150812.796791-1-geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabledTariq Toukan2-0/+8
With NETIF_F_HW_TLS_RX packets are decrypted in HW. This cannot be logically done when RXCSUM offload is off. Fixes: 14136564c8ee ("net: Add TLS RX offload feature") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Link: https://lore.kernel.org/r/20210117151538.9411-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19Merge branch 'ipv4-ensure-ecn-bits-don-t-influence-source-address-validation'Jakub Kicinski2-2/+3
Guillaume Nault says: ==================== ipv4: Ensure ECN bits don't influence source address validation Functions that end up calling fib_table_lookup() should clear the ECN bits from the TOS, otherwise ECT(0) and ECT(1) packets can be treated differently. Most functions already clear the ECN bits, but there are a few cases where this is not done. This series only fixes the ones related to source address validation. ==================== Link: https://lore.kernel.org/r/cover.1610790904.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19netfilter: rpfilter: mask ecn bits before fib lookupGuillaume Nault1-1/+1
RT_TOS() only masks one of the two ECN bits. Therefore rpfilter_mt() treats Not-ECT or ECT(1) packets in a different way than those with ECT(0) or CE. Reproducer: Create two netns, connected with a veth: $ ip netns add ns0 $ ip netns add ns1 $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1 $ ip -netns ns0 link set dev veth01 up $ ip -netns ns1 link set dev veth10 up $ ip -netns ns0 address add 192.0.2.10/32 dev veth01 $ ip -netns ns1 address add 192.0.2.11/32 dev veth10 Add a route to ns1 in ns0: $ ip -netns ns0 route add 192.0.2.11/32 dev veth01 In ns1, only packets with TOS 4 can be routed to ns0: $ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10 Ping from ns0 to ns1 works regardless of the ECN bits, as long as TOS is 4: $ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT ... 0% packet loss ... $ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1) ... 0% packet loss ... $ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0) ... 0% packet loss ... $ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE ... 0% packet loss ... Now use iptable's rpfilter module in ns1: $ ip netns exec ns1 iptables-legacy -t raw -A PREROUTING -m rpfilter --invert -j DROP Not-ECT and ECT(1) packets still pass: $ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT ... 0% packet loss ... $ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1) ... 0% packet loss ... But ECT(0) and ECN packets are dropped: $ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0) ... 100% packet loss ... $ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE ... 100% packet loss ... After this patch, rpfilter doesn't drop ECT(0) and CE packets anymore. Fixes: 8f97339d3feb ("netfilter: add ipv4 reverse path filter match") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19udp: mask TOS bits in udp_v4_early_demux()Guillaume Nault1-1/+2
udp_v4_early_demux() is the only function that calls ip_mc_validate_source() with a TOS that hasn't been masked with IPTOS_RT_MASK. This results in different behaviours for incoming multicast UDPv4 packets, depending on if ip_mc_validate_source() is called from the early-demux path (udp_v4_early_demux) or from the regular input path (ip_route_input_noref). ECN would normally not be used with UDP multicast packets, so the practical consequences should be limited on that side. However, IPTOS_RT_MASK is used to also masks the TOS' high order bits, to align with the non-early-demux path behaviour. Reproducer: Setup two netns, connected with veth: $ ip netns add ns0 $ ip netns add ns1 $ ip -netns ns0 link set dev lo up $ ip -netns ns1 link set dev lo up $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1 $ ip -netns ns0 link set dev veth01 up $ ip -netns ns1 link set dev veth10 up $ ip -netns ns0 address add 192.0.2.10 peer 192.0.2.11/32 dev veth01 $ ip -netns ns1 address add 192.0.2.11 peer 192.0.2.10/32 dev veth10 In ns0, add route to multicast address 224.0.2.0/24 using source address 198.51.100.10: $ ip -netns ns0 address add 198.51.100.10/32 dev lo $ ip -netns ns0 route add 224.0.2.0/24 dev veth01 src 198.51.100.10 In ns1, define route to 198.51.100.10, only for packets with TOS 4: $ ip -netns ns1 route add 198.51.100.10/32 tos 4 dev veth10 Also activate rp_filter in ns1, so that incoming packets not matching the above route get dropped: $ ip netns exec ns1 sysctl -wq net.ipv4.conf.veth10.rp_filter=1 Now try to receive packets on 224.0.2.11: $ ip netns exec ns1 socat UDP-RECVFROM:1111,ip-add-membership=224.0.2.11:veth10,ignoreeof - In ns0, send packet to 224.0.2.11 with TOS 4 and ECT(0) (that is, tos 6 for socat): $ echo test0 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6 The "test0" message is properly received by socat in ns1, because early-demux has no cached dst to use, so source address validation is done by ip_route_input_mc(), which receives a TOS that has the ECN bits masked. Now send another packet to 224.0.2.11, still with TOS 4 and ECT(0): $ echo test1 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6 The "test1" message isn't received by socat in ns1, because, now, early-demux has a cached dst to use and calls ip_mc_validate_source() immediately, without masking the ECN bits. Fixes: bc044e8db796 ("udp: perform source validation for mcast early demux") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19xsk: Clear pool even for inactive queuesMaxim Mikityanskiy1-2/+2
The number of queues can change by other means, rather than ethtool. For example, attaching an mqprio qdisc with num_tc > 1 leads to creating multiple sets of TX queues, which may be then destroyed when mqprio is deleted. If an AF_XDP socket is created while mqprio is active, dev->_tx[queue_id].pool will be filled, but then real_num_tx_queues may decrease with deletion of mqprio, which will mean that the pool won't be NULLed, and a further increase of the number of TX queues may expose a dangling pointer. To avoid any potential misbehavior, this commit clears pool for RX and TX queues, regardless of real_num_*_queues, still taking into consideration num_*_queues to avoid overflows. Fixes: 1c1efc2af158 ("xsk: Create and free buffer pool independently from umem") Fixes: a41b4f3c58dd ("xsk: simplify xdp_clear_umem_at_qid implementation") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/20210118160333.333439-1-maximmi@mellanox.com
2021-01-19Merge tag 'task_work-2021-01-19' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+3
Pull task_work fix from Jens Axboe: "The TIF_NOTIFY_SIGNAL change inadvertently removed the unconditional task_work run we had in get_signal(). This caused a regression for some setups, since we're relying on eg ____fput() being run to close and release, for example, a pipe and wake the other end. For 5.11, I prefer the simple solution of just reinstating the unconditional run, even if it conceptually doesn't make much sense - if you need that kind of guarantee, you should be using TWA_SIGNAL instead of TWA_NOTIFY. But it's the trivial fix for 5.11, and would ensure that other potential gotchas/assumptions for task_work don't regress for 5.11. We're looking into further simplifying the task_work notifications for 5.12 which would resolve that too" * tag 'task_work-2021-01-19' of git://git.kernel.dk/linux-block: task_work: unconditionally run task_work from get_signal()
2021-01-20openrisc: io: Add missing __iomem annotation to iounmap()Geert Uytterhoeven2-2/+2
With C=1: drivers/soc/renesas/rmobile-sysc.c:330:33: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void *addr @@ got void [noderef] __iomem *[assigned] base @@ drivers/soc/renesas/rmobile-sysc.c:330:33: sparse: expected void *addr drivers/soc/renesas/rmobile-sysc.c:330:33: sparse: got void [noderef] __iomem *[assigned] base Fix this by adding the missing __iomem annotation to iounmap(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stafford Horne <shorne@gmail.com>
2021-01-19bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callbackMircea Cirjaliu1-1/+1
I assume this was obtained by copy/paste. Point it to bpf_map_peek_elem() instead of bpf_map_pop_elem(). In practice it may have been less likely hit when under JIT given shielded via 84430d4232c3 ("bpf, verifier: avoid retpoline for map push/pop/peek operation"). Fixes: f1a2e44a3aec ("bpf: add queue and stack maps") Signed-off-by: Mircea Cirjaliu <mcirjaliu@bitdefender.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Mauricio Vasquez <mauriciovasquezbernal@gmail.com> Link: https://lore.kernel.org/bpf/AM7PR02MB6082663DFDCCE8DA7A6DD6B1BBA30@AM7PR02MB6082.eurprd02.prod.outlook.com
2021-01-19Merge tag 'nfsd-5.11-2' of ↵Linus Torvalds3-9/+61
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: - Avoid exposing parent of root directory in NFSv3 READDIRPLUS results - Fix a tracepoint change that went in the initial 5.11 merge * tag 'nfsd-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: SUNRPC: Move the svc_xdr_recvfrom tracepoint again nfsd4: readdirplus shouldn't return parent of export
2021-01-19Merge tag 'hyperv-fixes-signed-20210119' of ↵Linus Torvalds1-3/+26
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fix from Wei Liu: "One patch from Dexuan to fix clockevent initialization" * tag 'hyperv-fixes-signed-20210119' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Initialize clockevents after LAPIC is initialized
2021-01-19Merge branch 'sh_eth-fix-reboot-crash'Jakub Kicinski3-2/+33
Geert Uytterhoeven says: ==================== sh_eth: Fix reboot crash This patch fixes a regression v5.11-rc1, where rebooting while a sh_eth device is not opened will cause a crash. Changes compared to v1: - Export mdiobb_{read,write}(), - Call mdiobb_{read,write}() now they are exported, - Use mii_bus.parent to avoid bb_info.dev copy, - Drop RFC state. Alternatively, mdio-bitbang could provide Runtime PM-aware wrappers itself, and use them either manually (through a new parameter to alloc_mdio_bitbang(), or a new alloc_mdio_bitbang_*() function), or automatically (e.g. if pm_runtime_enabled() returns true). Note that the latter requires a "struct device *" parameter to operate on. Currently there are only two drivers that call alloc_mdio_bitbang() and use Runtime PM: the Renesas sh_eth and ravb drivers. This series fixes the former, while the latter is not affected (it keeps the device powered all the time between driver probe and driver unbind, and changing that seems to be non-trivial). ==================== Link: https://lore.kernel.org/r/20210118150656.796584-1-geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19sh_eth: Make PHY access aware of Runtime PM to fix reboot crashGeert Uytterhoeven1-0/+26
Wolfram reports that his R-Car H2-based Lager board can no longer be rebooted in v5.11-rc1, as it crashes with an imprecise external abort. The issue can be reproduced on other boards (e.g. Koelsch with R-Car M2-W) too, if CONFIG_IP_PNP is disabled, and the Ethernet interface is down at reboot time: Unhandled fault: imprecise external abort (0x1406) at 0x00000000 pgd = (ptrval) [00000000] *pgd=422b6835, *pte=00000000, *ppte=00000000 Internal error: : 1406 [#1] ARM Modules linked in: CPU: 0 PID: 1105 Comm: init Tainted: G W 5.10.0-rc1-00402-ge2f016cf7751 #1048 Hardware name: Generic R-Car Gen2 (Flattened Device Tree) PC is at sh_mdio_ctrl+0x44/0x60 LR is at sh_mmd_ctrl+0x20/0x24 ... Backtrace: [<c0451f30>] (sh_mdio_ctrl) from [<c0451fd4>] (sh_mmd_ctrl+0x20/0x24) r7:0000001f r6:00000020 r5:00000002 r4:c22a1dc4 [<c0451fb4>] (sh_mmd_ctrl) from [<c044fc18>] (mdiobb_cmd+0x38/0xa8) [<c044fbe0>] (mdiobb_cmd) from [<c044feb8>] (mdiobb_read+0x58/0xdc) r9:c229f844 r8:c0c329dc r7:c221e000 r6:00000001 r5:c22a1dc4 r4:00000001 [<c044fe60>] (mdiobb_read) from [<c044c854>] (__mdiobus_read+0x74/0xe0) r7:0000001f r6:00000001 r5:c221e000 r4:c221e000 [<c044c7e0>] (__mdiobus_read) from [<c044c9d8>] (mdiobus_read+0x40/0x54) r7:0000001f r6:00000001 r5:c221e000 r4:c221e458 [<c044c998>] (mdiobus_read) from [<c044d678>] (phy_read+0x1c/0x20) r7:ffffe000 r6:c221e470 r5:00000200 r4:c229f800 [<c044d65c>] (phy_read) from [<c044d94c>] (kszphy_config_intr+0x44/0x80) [<c044d908>] (kszphy_config_intr) from [<c044694c>] (phy_disable_interrupts+0x44/0x50) r5:c229f800 r4:c229f800 [<c0446908>] (phy_disable_interrupts) from [<c0449370>] (phy_shutdown+0x18/0x1c) r5:c229f800 r4:c229f804 [<c0449358>] (phy_shutdown) from [<c040066c>] (device_shutdown+0x168/0x1f8) [<c0400504>] (device_shutdown) from [<c013de44>] (kernel_restart_prepare+0x3c/0x48) r9:c22d2000 r8:c0100264 r7:c0b0d034 r6:00000000 r5:4321fedc r4:00000000 [<c013de08>] (kernel_restart_prepare) from [<c013dee0>] (kernel_restart+0x1c/0x60) [<c013dec4>] (kernel_restart) from [<c013e1d8>] (__do_sys_reboot+0x168/0x208) r5:4321fedc r4:01234567 [<c013e070>] (__do_sys_reboot) from [<c013e2e8>] (sys_reboot+0x18/0x1c) r7:00000058 r6:00000000 r5:00000000 r4:00000000 [<c013e2d0>] (sys_reboot) from [<c0100060>] (ret_fast_syscall+0x0/0x54) As of commit e2f016cf775129c0 ("net: phy: add a shutdown procedure"), system reboot calls phy_disable_interrupts() during shutdown. As this happens unconditionally, the PHY registers may be accessed while the device is suspended, causing undefined behavior, which may crash the system. Fix this by wrapping the PHY bitbang accessors in the sh_eth driver by wrappers that take care of Runtime PM, to resume the device when needed. Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19mdio-bitbang: Export mdiobb_{read,write}()Geert Uytterhoeven2-2/+7
Export mdiobb_read() and mdiobb_write(), so Ethernet controller drivers can call them from their MDIO read/write wrappers. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19net: core: devlink: use right genl user_ptr when handling port param get/setOleksandr Mazur1-2/+2
Fix incorrect user_ptr dereferencing when handling port param get/set: idx [0] stores the 'struct devlink' pointer; idx [1] stores the 'struct devlink_port' pointer; Fixes: 637989b5d77e ("devlink: Always use user_ptr[0] for devlink and simplify post_doit") CC: Parav Pandit <parav@mellanox.com> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Link: https://lore.kernel.org/r/20210119085333.16833-1-vadym.kochan@plvision.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19x86: PM: Register syscore_ops for scale invarianceRafael J. Wysocki1-0/+19
On x86 scale invariace tends to be disabled during resume from suspend-to-RAM, because the MPERF or APERF MSR values are not as expected then due to updates taking place after the platform firmware has been invoked to complete the suspend transition. That, of course, is not desirable, especially if the schedutil scaling governor is in use, because the lack of scale invariance causes it to be less reliable. To counter that effect, modify init_freq_invariance() to register a syscore_ops object for scale invariance with the ->resume callback pointing to init_counter_refs() which will run on the CPU starting the resume transition (the other CPUs will be taken care of the "online" operations taking place later). Fixes: e2b0d619b400 ("x86, sched: check for counters overflow in frequency invariant accounting") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Giovanni Gherdovich <ggherdovich@suse.cz> Link: https://lkml.kernel.org/r/1803209.Mvru99baaF@kreacher
2021-01-19ALSA: hda: Balance runtime/system PM if direct-complete is disabledKai-Heng Feng1-17/+7
After hibernation, HDA controller can't be runtime-suspended after commit 215a22ed31a1 ("ALSA: hda: Refactor codjc PM to use direct-complete optimization"), which enables direct-complete for HDA codec. The HDA codec driver didn't expect direct-complete will be disabled after it returns a positive value from prepare() callback. However, there are some places that PM core can disable direct-complete. For instance, system hibernation or when codec has subordinates like LEDs. So if the codec is prepared for direct-complete but PM core still calls codec's suspend or freeze callback, partially revert the commit and take the original approach, which uses pm_runtime_force_*() helpers to ensure PM refcount are balanced. Meanwhile, still keep prepare() and complete() callbacks to enable direct-complete and request a resume for jack detection, respectively. Reported-by: Kenneth R. Crudup <kenny@panix.com> Fixes: 215a22ed31a1 ("ALSA: hda: Refactor codec PM to use direct-complete optimization") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20210119152145.346558-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-19drm/vram-helper: Reuse existing page mappings in vmapThomas Zimmermann1-3/+11
For performance, BO page mappings can stay in place even if the map counter has returned to 0. In these cases, the existing page mapping has to be reused by the next vmap operation. Otherwise a new mapping would be installed and the old mapping's pages leak. Fix the issue by reusing existing page mappings for vmap operations. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 1086db71a1db ("drm/vram-helper: Remove invariant parameters from internal kmap function") Acked-by: Christian König <christian.koenig@amd.com> Tested-by: Eli Cohen <elic@nvidia.com> Reported-by: Eli Cohen <elic@nvidia.com> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Christian König <christian.koenig@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20210118144639.27307-1-tzimmermann@suse.de
2021-01-19drm/atomic: put state on error pathPan Bian1-1/+1
Put the state before returning error code. Fixes: 44596b8c4750 ("drm/atomic: Unify conflicting encoder handling.") Signed-off-by: Pan Bian <bianpan2016@163.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210119121127.84127-1-bianpan2016@163.com
2021-01-19usb: bdc: Make bdc pci driver depend on BROKENPatrik Jakobsson1-1/+1
The bdc pci driver is going to be removed due to it not existing in the wild. This patch turns off compilation of the driver so that stable kernels can also pick up the change. This helps the out-of-tree facetimehd webcam driver as the pci id conflicts with bdc. Cc: Al Cooper <alcooperx@gmail.com> Cc: <stable@vger.kernel.org> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://lore.kernel.org/r/20210118203615.13995-1-patrik.r.jakobsson@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-19gpio: tegra: Add missing dependenciesThierry Reding1-0/+2
Commit efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip") moved the Tegra GPIO driver to the generic GPIO IRQ chip infrastructure and made the IRQ domain hierarchical, so the driver needs to pull in the support infrastructure via the GPIOLIB_IRQCHIP and IRQ_DOMAIN_HIERARCHY Kconfig options. Fixes: efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-01-19gpio: sifive: select IRQ_DOMAIN_HIERARCHY rather than depend on itRandy Dunlap1-1/+2
This is the only driver in the kernel source tree that depends on IRQ_DOMAIN_HIERARCHY instead of selecting it. Since it is not a visible Kconfig symbol, depending on it (expecting a user to set/enable it) doesn't make much sense, so change it to select instead of "depends on". Fixes: 96868dce644d ("gpio/sifive: Add GPIO driver for SiFive SoCs") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: linux-gpio@vger.kernel.org Cc: Thierry Reding <treding@nvidia.com> Cc: Greentime Hu <greentime.hu@sifive.com> Cc: Yash Shah <yash.shah@sifive.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-01-19gpio: mvebu: fix pwm .get_state period calculationBaruch Siach1-11/+8
The period is the sum of on and off values. That is, calculate period as ($on + $off) / clkrate instead of $off / clkrate - $on / clkrate that makes no sense. Reported-by: Russell King <linux@armlinux.org.uk> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 757642f9a584e ("gpio: mvebu: Add limited PWM support") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-01-19gpiolib: add a warning on gpiochip->to_irq definedNikita Shubin1-0/+3
gpiochip->to_irq method is redefined in gpiochip_add_irqchip. A lot of gpiod driver's still define ->to_irq method, let's give a gentle warning that they can no longer rely on it, so they can remove it on ocassion. Fixes: e0d8972898139 ("gpio: Implement tighter IRQ chip integration") Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-01-19printk: fix buffer overflow potential for print_text()John Ogness1-9/+27
Before the commit 896fbe20b4e2333fb55 ("printk: use the lockless ringbuffer"), msg_print_text() would only write up to size-1 bytes into the provided buffer. Some callers expect this behavior and append a terminator to returned string. In particular: arch/powerpc/xmon/xmon.c:dump_log_buf() arch/um/kernel/kmsg_dump.c:kmsg_dumper_stdout() msg_print_text() has been replaced by record_print_text(), which currently fills the full size of the buffer. This causes a buffer overflow for the above callers. Change record_print_text() so that it will only use size-1 bytes for text data. Also, for paranoia sakes, add a terminator after the text data. And finally, document this behavior so that it is clear that only size-1 bytes are used and a terminator is added. Fixes: 896fbe20b4e2333fb55 ("printk: use the lockless ringbuffer") Cc: stable@vger.kernel.org # 5.10+ Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210114170412.4819-1-john.ogness@linutronix.de
2021-01-19drm/i915: Only enable DFP 4:4:4->4:2:0 conversion when outputting YCbCr 4:4:4Ville Syrjälä3-6/+8
Let's not enable the 4:4:4->4:2:0 conversion bit in the DFP unless we're actually outputting YCbCr 4:4:4. It would appear some protocol converters blindy consult this bit even when the source is outputting RGB, resulting in a visual mess. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2914 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111164111.13302-1-ville.syrjala@linux.intel.com Fixes: 181567aa9f0d ("drm/i915: Do YCbCr 444->420 conversion via DP protocol converters") Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 3170a21f7059c4660c469f59bf529f372a57da5f) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210118154355.24453-1-ville.syrjala@linux.intel.com
2021-01-18tcp: fix TCP_USER_TIMEOUT with zero windowEnke Chen6-7/+14
The TCP session does not terminate with TCP_USER_TIMEOUT when data remain untransmitted due to zero window. The number of unanswered zero-window probes (tcp_probes_out) is reset to zero with incoming acks irrespective of the window size, as described in tcp_probe_timer(): RFC 1122 4.2.2.17 requires the sender to stay open indefinitely as long as the receiver continues to respond probes. We support this by default and reset icsk_probes_out with incoming ACKs. This counter, however, is the wrong one to be used in calculating the duration that the window remains closed and data remain untransmitted. Thanks to Jonathan Maxwell <jmaxwell37@gmail.com> for diagnosing the actual issue. In this patch a new timestamp is introduced for the socket in order to track the elapsed time for the zero-window probes that have not been answered with any non-zero window ack. Fixes: 9721e709fa68 ("tcp: simplify window probe aborting on USER_TIMEOUT") Reported-by: William McCall <william.mccall@gmail.com> Co-developed-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Enke Chen <enchen@paloaltonetworks.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210115223058.GA39267@localhost.localdomain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18Merge branch 'ipv6-fixes-for-the-multicast-routes'Jakub Kicinski1-1/+2
Matteo Croce says: ==================== ipv6: fixes for the multicast routes Fix two wrong flags in the IPv6 multicast routes created by the autoconf code. ==================== Link: https://lore.kernel.org/r/20210115184209.78611-1-mcroce@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18ipv6: set multicast flag on the multicast routeMatteo Croce1-1/+1
The multicast route ff00::/8 is created with type RTN_UNICAST: $ ip -6 -d route unicast ::1 dev lo proto kernel scope global metric 256 pref medium unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium unicast ff00::/8 dev eth0 proto kernel scope global metric 256 pref medium Set the type to RTN_MULTICAST which is more appropriate. Fixes: e8478e80e5a7 ("net/ipv6: Save route type in rt6_info") Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18ipv6: create multicast route with RTPROT_KERNELMatteo Croce1-0/+1
The ff00::/8 multicast route is created without specifying the fc_protocol field, so the default RTPROT_BOOT value is used: $ ip -6 -d route unicast ::1 dev lo proto kernel scope global metric 256 pref medium unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium unicast ff00::/8 dev eth0 proto boot scope global metric 256 pref medium As the documentation says, this value identifies routes installed during boot, but the route is created when interface is set up. Change the value to RTPROT_KERNEL which is a better value. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18Merge tag 'mac80211-for-net-2021-01-18.2' of ↵Jakub Kicinski6-40/+54
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Various fixes: * kernel-doc parsing fixes * incorrect debugfs string checks * locking fix in regulatory * some encryption-related fixes * tag 'mac80211-for-net-2021-01-18.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: mac80211: check if atf has been disabled in __ieee80211_schedule_txq mac80211: do not drop tx nulldata packets on encrypted links mac80211: fix encryption key selection for 802.3 xmit mac80211: fix fast-rx encryption check mac80211: fix incorrect strlen of .write in debugfs cfg80211: fix a kerneldoc markup cfg80211: Save the regulatory domain with a lock cfg80211/mac80211: fix kernel-doc for SAR APIs ==================== Link: https://lore.kernel.org/r/20210118204750.7243-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19selftests/powerpc: Fix exit status of pkey testsSandipan Das2-2/+2
Since main() does not return a value explicitly, the return values from FAIL_IF() conditions are ignored and the tests can still pass irrespective of failures. This makes sure that we always explicitly return the correct test exit status. Fixes: 1addb6444791 ("selftests/powerpc: Add test for execute-disabled pkeys") Fixes: c27f2fd1705a ("selftests/powerpc: Add test for pkey siginfo verification") Reported-by: Eirik Fuller <efuller@redhat.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210118093145.10134-1-sandipan@linux.ibm.com
2021-01-18net: dsa: mv88e6xxx: also read STU state in mv88e6250_g1_vtu_getnextRasmus Villemoes1-0/+4
mv88e6xxx_port_vlan_join checks whether the VTU already contains an entry for the given vid (via mv88e6xxx_vtu_getnext), and if so, merely changes the relevant .member[] element and loads the updated entry into the VTU. However, at least for the mv88e6250, the on-stack struct mv88e6xxx_vtu_entry vlan never has its .state[] array explicitly initialized, neither in mv88e6xxx_port_vlan_join() nor inside the getnext implementation. So the new entry has random garbage for the STU bits, breaking VLAN filtering. When the VTU entry is initially created, those bits are all zero, and we should make sure to keep them that way when the entry is updated. Fixes: 92307069a96c (net: dsa: mv88e6xxx: Avoid VTU corruption on 6097) Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18platform/x86: thinkpad_acpi: Add P53/73 firmware to fan_quirk_table for dual ↵Jeannie Stevenson1-0/+1
fan control This commit enables dual fan control for the new Lenovo P53 and P73 laptop models. Signed-off-by: Jeannie Stevenson <jeanniestevenson@protonmail.com> Link: https://lore.kernel.org/r/Pn_Xii4XYpQRFtgkf4PbNgieE89BAkHgLI1kWIq-zFudwh2A1DY5J_DJVHK06rMW_hGPHx_mPE33gd8mg9-8BxqJTaSC6hhPqAsfZlcNGH0=@protonmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-18platform/x86: hp-wmi: Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errorsHans de Goede1-1/+2
The recently added thermal policy support makes a hp_wmi_perform_query(0x4c, ...) call on older devices which do not support thermal policies this causes the following warning to be logged (seen on a HP Stream x360 Convertible PC 11): [ 26.805305] hp_wmi: query 0x4c returned error 0x3 Error 0x3 is HPWMI_RET_UNKNOWN_COMMAND error. This commit silences the warning for unknown-command errors, silencing the new warning. Cc: Elia Devito <eliadevito@gmail.com> Fixes: 81c93798ef3e ("platform/x86: hp-wmi: add support for thermal policy") Link: https://lore.kernel.org/r/20210114232744.154886-1-hdegoede@redhat.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-18net: mscc: ocelot: allow offloading of bridge on top of LAGVladimir Oltean1-3/+1
The blamed commit was too aggressive, and it made ocelot_netdevice_event react only to network interface events emitted for the ocelot switch ports. In fact, only the PRECHANGEUPPER should have had that check. When we ignore all events that are not for us, we miss the fact that the upper of the LAG changes, and the bonding interface gets enslaved to a bridge. This is an operation we could offload under certain conditions. Fixes: 7afb3e575e5a ("net: mscc: ocelot: don't handle netdev events for other netdevs") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210118135210.2666246-1-olteanv@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18Merge tag 'spi-fix-v5.11-rc4' of ↵Linus Torvalds2-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few more bug fixes for SPI, both driver specific ones. The caching in the Cadence driver is to avoid a deadlock trying to retrieve the cached value later at runtime" * tag 'spi-fix-v5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: cadence: cache reference clock rate during probe spi: fsl: Fix driver breakage when SPI_CS_HIGH is not set in spi->mode
2021-01-18Merge tag 'fixes-2021-01-18' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull ia64 build fix from Mike Rapoport: "Fix an ia64 build failure caused by memory model changes" * tag 'fixes-2021-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: ia64: fix build failure caused by memory model changes
2021-01-18Merge branch 'linus' of ↵Linus Torvalds2-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "A Kconfig dependency issue with omap-sham and a divide by zero in xor on some platforms" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: omap-sham - Fix link error without crypto-engine crypto: xor - Fix divide error in do_xor_speed()
2021-01-18Merge tag 'asoc-fix-v5.11-rc4' of ↵Takashi Iwai550-3328/+5152
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.11 A few more fixes for v5.11, mostly around HDA jack detection, plus a couple of updates to the MAINTAINERS entries.
2021-01-18platform/x86: intel-vbtn: Drop HP Stream x360 Convertible PC 11 from allow-listHans de Goede1-6/+0
THe HP Stream x360 Convertible PC 11 DSDT has the following VGBS function: Method (VGBS, 0, Serialized) { If ((^^PCI0.LPCB.EC0.ROLS == Zero)) { VBDS = Zero } Else { VBDS = Zero } Return (VBDS) /* \_SB_.VGBI.VBDS */ } Which is obviously wrong, because it always returns 0 independent of the 2-in-1 being in laptop or tablet mode. This causes the intel-vbtn driver to initially report SW_TABLET_MODE = 1 to userspace, which is known to cause problems when the 2-in-1 is actually in laptop mode. During earlier testing this turned out to not be a problem because the 2-in-1 would do a Notify(..., 0xCC) or Notify(..., 0xCD) soon after the intel-vbtn driver loaded, correcting the SW_TABLET_MODE state. Further testing however has shown that this Notify() soon after the intel-vbtn driver loads, does not always happen. When the Notify does not happen, then intel-vbtn reports SW_TABLET_MODE = 1 resulting in a non-working touchpad. IOW the tablet-mode reporting is not reliable on this device, so it should be dropped from the allow-list, fixing the touchpad sometimes not working. Fixes: 8169bd3e6e19 ("platform/x86: intel-vbtn: Switch to an allow-list for SW_TABLET_MODE reporting") Link: https://lore.kernel.org/r/20210114143432.31750-1-hdegoede@redhat.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-18kasan, arm64: fix pointer tags in KASAN reportsAndrey Konovalov1-3/+4
As of the "arm64: expose FAR_EL1 tag bits in siginfo" patch, the address that is passed to report_tag_fault has pointer tags in the format of 0x0X, while KASAN uses 0xFX format (note the difference in the top 4 bits). Fix up the pointer tag for kernel pointers in do_tag_check_fault by setting them to the same value as bit 55. Explicitly use __untagged_addr() instead of untagged_addr(), as the latter doesn't affect TTBR1 addresses. Fixes: dceec3ff7807 ("arm64: expose FAR_EL1 tag bits in siginfo") Fixes: 4291e9ee6189 ("kasan, arm64: print report from tag fault handler") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://linux-review.googlesource.com/id/I9ced973866036d8679e8f4ae325de547eb969649 Link: https://lore.kernel.org/r/ff30b0afe6005fd046f9ac72bfb71822aedccd89.1610731872.git.andreyknvl@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-01-18pinctrl: qcom: Don't clear pending interrupts when enablingDouglas Anderson1-24/+50
In Linux, if a driver does disable_irq() and later does enable_irq() on its interrupt, I believe it's expecting these properties: * If an interrupt was pending when the driver disabled then it will still be pending after the driver re-enables. * If an edge-triggered interrupt comes in while an interrupt is disabled it should assert when the interrupt is re-enabled. If you think that the above sounds a lot like the disable_irq() and enable_irq() are supposed to be masking/unmasking the interrupt instead of disabling/enabling it then you've made an astute observation. Specifically when talking about interrupts, "mask" usually means to stop posting interrupts but keep tracking them and "disable" means to fully shut off interrupt detection. It's unfortunate that this is so confusing, but presumably this is all the way it is for historical reasons. Perhaps more confusing than the above is that, even though clients of IRQs themselves don't have a way to request mask/unmask vs. disable/enable calls, IRQ chips themselves can implement both. ...and yet more confusing is that if an IRQ chip implements disable/enable then they will be called when a client driver calls disable_irq() / enable_irq(). It does feel like some of the above could be cleared up. However, without any other core interrupt changes it should be clear that when an IRQ chip gets a request to "disable" an IRQ that it has to treat it like a mask of that IRQ. In any case, after that long interlude you can see that the "unmask and clear" can break things. Maulik tried to fix it so that we no longer did "unmask and clear" in commit 71266d9d3936 ("pinctrl: qcom: Move clearing pending IRQ to .irq_request_resources callback"), but it only handled the PDC case and it had problems (it caused sc7180-trogdor devices to fail to suspend). Let's fix. >From my understanding the source of the phantom interrupt in the were these two things: 1. One that could have been introduced in msm_gpio_irq_set_type() (only for the non-PDC case). 2. Edges could have been detected when a GPIO was muxed away. Fixing case #1 is easy. We can just add a clear in msm_gpio_irq_set_type(). Fixing case #2 is harder. Let's use a concrete example. In sc7180-trogdor.dtsi we configure the uart3 to have two pinctrl states, sleep and default, and mux between the two during runtime PM and system suspend (see geni_se_resources_{on,off}() for more details). The difference between the sleep and default state is that the RX pin is muxed to a GPIO during sleep and muxed to the UART otherwise. As per Qualcomm, when we mux the pin over to the UART function the PDC (or the non-PDC interrupt detection logic) is still watching it / latching edges. These edges don't cause interrupts because the current code masks the interrupt unless we're entering suspend. However, as soon as we enter suspend we unmask the interrupt and it's counted as a wakeup. Let's deal with the problem like this: * When we mux away, we'll mask our interrupt. This isn't necessary in the above case since the client already masked us, but it's a good idea in general. * When we mux back will clear any interrupts and unmask. Fixes: 4b7618fdc7e6 ("pinctrl: qcom: Add irq_enable callback for msm gpio") Fixes: 71266d9d3936 ("pinctrl: qcom: Move clearing pending IRQ to .irq_request_resources callback") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Maulik Shah <mkshah@codeaurora.org> Tested-by: Maulik Shah <mkshah@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210114191601.v7.4.I7cf3019783720feb57b958c95c2b684940264cd1@changeid Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-02 19:43:23 +0000