summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2023-01-11KVM: s390: interrupt: use READ_ONCE() before cmpxchg()Heiko Carstens1-4/+8
Use READ_ONCE() before cmpxchg() to prevent that the compiler generates code that fetches the to be compared old value several times from memory. Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20230109145456.2895385-1-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-11s390/percpu: add READ_ONCE() to arch_this_cpu_to_op_simple()Heiko Carstens1-1/+1
Make sure that *ptr__ within arch_this_cpu_to_op_simple() is only dereferenced once by using READ_ONCE(). Otherwise the compiler could generate incorrect code. Cc: <stable@vger.kernel.org> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-11s390/cpum_sf: add READ_ONCE() semantics to compare and swap loopsHeiko Carstens2-55/+77
The current cmpxchg_double() loops within the perf hw sampling code do not have READ_ONCE() semantics to read the old value from memory. This allows the compiler to generate code which reads the "old" value several times from memory, which again allows for inconsistencies. For example: /* Reset trailer (using compare-double-and-swap) */ do { te_flags = te->flags & ~SDB_TE_BUFFER_FULL_MASK; te_flags |= SDB_TE_ALERT_REQ_MASK; } while (!cmpxchg_double(&te->flags, &te->overflow, te->flags, te->overflow, te_flags, 0ULL)); The compiler could generate code where te->flags used within the cmpxchg_double() call may be refetched from memory and which is not necessarily identical to the previous read version which was used to generate te_flags. Which in turn means that an incorrect update could happen. Fix this by adding READ_ONCE() semantics to all cmpxchg_double() loops. Given that READ_ONCE() cannot generate code on s390 which atomically reads 16 bytes, use a private compare-and-swap-double implementation to achieve that. Also replace cmpxchg_double() with the private implementation to be able to re-use the old value within the loops. As a side effect this converts the whole code to only use bit fields to read and modify bits within the hws trailer header. Reported-by: Alexander Gordeev <agordeev@linux.ibm.com> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.ibm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/linux-s390/Y71QJBhNTIatvxUT@osiris/T/#ma14e2a5f7aa8ed4b94b6f9576799b3ad9c60f333 Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-11spi: Merge rename of spi-cs-setup-ns DT propertyMark Brown2-3/+3
The newly added spi-cs-setup-ns doesn't really fit with the existing property names for delays, rename it so that it does before it makes it into a release and becomes ABI.
2023-01-11spi: spidev: remove debug messages that access spidev->spi without lockingBartosz Golaszewski1-2/+0
The two debug messages in spidev_open() dereference spidev->spi without taking the lock and without checking if it's not null. This can lead to a crash. Drop the messages as they're not needed - the user-space will get informed about ENOMEM with the syscall return value. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230106100719.196243-2-brgl@bgdev.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-11spi: spidev: fix a race condition when accessing spidev->spiBartosz Golaszewski1-16/+18
There's a spinlock in place that is taken in file_operations callbacks whenever we check if spidev->spi is still alive (not null). It's also taken when spidev->spi is set to NULL in remove(). This however doesn't protect the code against driver unbind event while one of the syscalls is still in progress. To that end we need a lock taken continuously as long as we may still access spidev->spi. As both the file ops and the remove callback are never called from interrupt context, we can replace the spinlock with a mutex. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230106100719.196243-1-brgl@bgdev.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-11Merge tag 'mlx5-fixes-2023-01-09' of ↵David S. Miller17-49/+104
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux mlx5-fixes-2023-01-09
2023-01-11ipv6: raw: Deduct extension header length in rawv6_push_pending_framesHerbert Xu1-0/+4
The total cork length created by ip6_append_data includes extension headers, so we must exclude them when comparing them against the IPV6_CHECKSUM offset which does not include extension headers. Reported-by: Kyle Zeng <zengyhkyle@gmail.com> Fixes: 357b40a18b04 ("[IPV6]: IPV6_CHECKSUM socket option can corrupt kernel memory") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-11net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit()Clément Léger1-0/+3
If ptp was not enabled due to missing IRQ for instance, lan966x_ptp_deinit() will dereference NULL pointers. Fixes: d096459494a8 ("net: lan966x: Add support for ptp clocks") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-10Merge branch '100GbE' of ↵Jakub Kicinski1-9/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-01-09 (ice) This series contains updates to ice driver only. Jiasheng Jiang frees allocated cmd_buf if write_buf allocation failed to prevent memory leak. Yuan Can adds check, and proper cleanup, of gnss_tty_port allocation call to avoid memory leaks. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Add check for kzalloc ice: Fix potential memory leak in ice_gnss_tty_write() ==================== Link: https://lore.kernel.org/r/20230109225358.3478060-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-10net: sched: disallow noqueue for qdisc classesFrederick Lawler1-0/+5
While experimenting with applying noqueue to a classful queue discipline, we discovered a NULL pointer dereference in the __dev_queue_xmit() path that generates a kernel OOPS: # dev=enp0s5 # tc qdisc replace dev $dev root handle 1: htb default 1 # tc class add dev $dev parent 1: classid 1:1 htb rate 10mbit # tc qdisc add dev $dev parent 1:1 handle 10: noqueue # ping -I $dev -w 1 -c 1 1.1.1.1 [ 2.172856] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 2.173217] #PF: supervisor instruction fetch in kernel mode ... [ 2.178451] Call Trace: [ 2.178577] <TASK> [ 2.178686] htb_enqueue+0x1c8/0x370 [ 2.178880] dev_qdisc_enqueue+0x15/0x90 [ 2.179093] __dev_queue_xmit+0x798/0xd00 [ 2.179305] ? _raw_write_lock_bh+0xe/0x30 [ 2.179522] ? __local_bh_enable_ip+0x32/0x70 [ 2.179759] ? ___neigh_create+0x610/0x840 [ 2.179968] ? eth_header+0x21/0xc0 [ 2.180144] ip_finish_output2+0x15e/0x4f0 [ 2.180348] ? dst_output+0x30/0x30 [ 2.180525] ip_push_pending_frames+0x9d/0xb0 [ 2.180739] raw_sendmsg+0x601/0xcb0 [ 2.180916] ? _raw_spin_trylock+0xe/0x50 [ 2.181112] ? _raw_spin_unlock_irqrestore+0x16/0x30 [ 2.181354] ? get_page_from_freelist+0xcd6/0xdf0 [ 2.181594] ? sock_sendmsg+0x56/0x60 [ 2.181781] sock_sendmsg+0x56/0x60 [ 2.181958] __sys_sendto+0xf7/0x160 [ 2.182139] ? handle_mm_fault+0x6e/0x1d0 [ 2.182366] ? do_user_addr_fault+0x1e1/0x660 [ 2.182627] __x64_sys_sendto+0x1b/0x30 [ 2.182881] do_syscall_64+0x38/0x90 [ 2.183085] entry_SYSCALL_64_after_hwframe+0x63/0xcd ... [ 2.187402] </TASK> Previously in commit d66d6c3152e8 ("net: sched: register noqueue qdisc"), NULL was set for the noqueue discipline on noqueue init so that __dev_queue_xmit() falls through for the noqueue case. This also sets a bypass of the enqueue NULL check in the register_qdisc() function for the struct noqueue_disc_ops. Classful queue disciplines make it past the NULL check in __dev_queue_xmit() because the discipline is set to htb (in this case), and then in the call to __dev_xmit_skb(), it calls into htb_enqueue() which grabs a leaf node for a class and then calls qdisc_enqueue() by passing in a queue discipline which assumes ->enqueue() is not set to NULL. Fix this by not allowing classes to be assigned to the noqueue discipline. Linux TC Notes states that classes cannot be set to the noqueue discipline. [1] Let's enforce that here. Links: 1. https://linux-tc-notes.sourceforge.net/tc/doc/sch_noqueue.txt Fixes: d66d6c3152e8 ("net: sched: register noqueue qdisc") Cc: stable@vger.kernel.org Signed-off-by: Frederick Lawler <fred@cloudflare.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/r/20230109163906.706000-1-fred@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-10Merge tag 'nfsd-6.2-3' of ↵Linus Torvalds12-89/+59
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: - Fix a race when creating NFSv4 files - Revert the use of relaxed bitops * tag 'nfsd-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: NFSD: Use set_bit(RQ_DROPME) Revert "SUNRPC: Use RMW bitops in single-threaded hot paths" nfsd: fix handling of cached open files in nfsd4_open codepath
2023-01-10Merge tag 'xtensa-20230110' of https://github.com/jcmvbkbc/linux-xtensaLinus Torvalds4-16/+6
Pull xtensa fixes from Max Filippov: - fix xtensa allmodconfig build broken by the kcsan test - drop unused members of struct thread_struct * tag 'xtensa-20230110' of https://github.com/jcmvbkbc/linux-xtensa: xtensa: drop unused members of struct thread_struct kcsan: test: don't put the expect array on the stack
2023-01-10iavf/iavf_main: actually log ->src mask when talking about itDaniil Tatianin1-1/+1
This fixes a copy-paste issue where dev_err would log the dst mask even though it is clearly talking about src. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: 0075fa0fadd0 ("i40evf: Add support to apply cloud filters") Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-10igc: Fix PPS delta between two synchronized end-pointsChristopher S Hall2-4/+8
This patch fix the pulse per second output delta between two synchronized end-points. Based on Intel Discrete I225 Software User Manual Section 4.2.15 TimeSync Auxiliary Control Register, ST0[Bit 4] and ST1[Bit 7] must be set to ensure that clock output will be toggles based on frequency value defined. This is to ensure that output of the PPS is aligned with the clock. How to test: 1) Running time synchronization on both end points. Ex: ptp4l --step_threshold=1 -m -f gPTP.cfg -i <interface name> 2) Configure PPS output using below command for both end-points Ex: SDP0 on I225 REV4 SKU variant ./testptp -d /dev/ptp0 -L 0,2 ./testptp -d /dev/ptp0 -p 1000000000 3) Measure the output using analyzer for both end-points Fixes: 87938851b6ef ("igc: enable auxiliary PHC functions for the i225") Signed-off-by: Christopher S Hall <christopher.s.hall@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-10ixgbe: fix pci device refcount leakYang Yingliang1-5/+9
As the comment of pci_get_domain_bus_and_slot() says, it returns a PCI device with refcount incremented, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). In ixgbe_get_first_secondary_devfn() and ixgbe_x550em_a_has_mii(), pci_dev_put() is called to avoid leak. Fixes: 8fa10ef01260 ("ixgbe: register a mdiobus") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-10perf bpf: Avoid build breakage with libbpf < 0.8.0 + LIBBPF_DYNAMIC=1Arnaldo Carvalho de Melo1-0/+2
In 746bd29e348f99b4 ("perf build: Use tools/lib headers from install path") we stopped having the tools/lib/ directory from the kernel sources in the header include path unconditionally, which breaks the build on systems with older versions of libbpf-devel, in this case 0.7.0 as some of the structures and function declarations present in the newer version of libbpf included in the kernel sources (tools/lib/bpf) are not anymore used, just the ones in the system libbpf. So instead of trying to provide alternative functions when the libbpf-bpf_program__set_insns feature test fails, fail a LIBBPF_DYNAMIC=1 build (requesting the use of the system's libbpf) and emit this build error message: $ make LIBBPF_DYNAMIC=1 -C tools/perf Makefile.config:593: *** Error: libbpf devel library needs to be >= 0.8.0 to build with LIBBPF_DYNAMIC, update or build statically with the version that comes with the kernel sources. Stop. $ For v6.3 these tests will be revamped and we'll require libbpf 1.0 as a minimal version for using LIBBPF_DYNAMIC=1, most distros should have it by now or at v6.3 time. Fixes: 746bd29e348f99b4 ("perf build: Use tools/lib headers from install path") Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/CAP-5=fVa51_URGsdDFVTzpyGmdDRj_Dj2EKPuDHNQ0BYgMSzUA@mail.gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-10perf build: Fix build error when NO_LIBBPF=1Ian Rogers2-9/+14
The $(LIBBPF) target should only be a dependency of prepare if the static version of libbpf is needed. Add a new LIBBPF_STATIC variable that is set by Makefile.config. Use LIBBPF_STATIC to determine whether the CFLAGS, etc. need updating and for adding $(LIBBPF) as a prepare dependency. As Makefile.config isn't loaded for "clean" as a target, always set LIBBPF_OUTPUT regardless of whether it is needed for $(LIBBPF). This is done to minimize conditional logic for $(LIBBPF)-clean. This issue and an original fix was reported by Mike Leach in: https://lore.kernel.org/lkml/20230105172243.7238-1-mike.leach@linaro.org/ Fixes: 746bd29e348f99b4 ("perf build: Use tools/lib headers from install path") Reported-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: bpf@vger.kernel.org Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20230106151320.619514-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-10perf tools: Don't install libtraceevent plugins as its not anymore in the ↵Arnaldo Carvalho de Melo2-20/+0
kernel sources While doing 'make -C tools/perf build-test' one can notice error messages while trying to install libtraceevent plugins, stop doing that as libtraceevent isn't anymore a homie. These are the warnings dealt with: make_install_prefix_slash_O: make install prefix=/tmp/krava/ failed to find: /tmp/krava/etc/bash_completion.d/perf failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_cfg80211.so failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_scsi.so failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_xen.so failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_function.so failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_sched_switch.so failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_mac80211.so failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_kvm.so failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_kmem.so failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_hrtimer.so failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_jbd2.so Fixes: 4171925aa9f3f7bf ("tools lib traceevent: Remove libtraceevent") Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/Y7xXz+TSpiCbQGjw@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-10perf kmem: Support field "node" in evsel__process_alloc_event() coping with ↵Leo Yan1-12/+24
recent tracepoint restructuring Commit 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of tracepoints") adds the field "node" into the tracepoints 'kmalloc' and 'kmem_cache_alloc', so this patch modifies the event process function to support the field "node". If field "node" is detected by checking function evsel__field(), it stats the cross allocation. When the "node" value is NUMA_NO_NODE (-1), it means the memory can be allocated from any memory node, in this case, we don't account it as a cross allocation. Fixes: 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of tracepoints") Reported-by: Ravi Bangoria <ravi.bangoria@amd.com> Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Link: https://lore.kernel.org/r/20230108062400.250690-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-10perf kmem: Support legacy tracepointsLeo Yan1-3/+26
Commit 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of tracepoints") removed tracepoints 'kmalloc_node' and 'kmem_cache_alloc_node', we need to consider the tool should be backward compatible. If it detect the tracepoint "kmem:kmalloc_node", this patch enables the legacy tracepoints, otherwise, it will ignore them. Fixes: 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of tracepoints") Reported-by: Ravi Bangoria <ravi.bangoria@amd.com> Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Link: https://lore.kernel.org/r/20230108062400.250690-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-10perf build: Properly guard libbpf includesIan Rogers2-0/+8
Including libbpf header files should be guarded by HAVE_LIBBPF_SUPPORT. In bpf_counter.h, move the skeleton utilities under HAVE_BPF_SKEL. Fixes: d6a735ef3277c45f ("perf bpf_counter: Move common functions to bpf_counter.h") Reported-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Mike Leach <mike.leach@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20230105172243.7238-1-mike.leach@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-10s390/kexec: fix ipl report address for kdumpAlexander Egorenkov1-2/+3
This commit addresses the following erroneous situation with file-based kdump executed on a system with a valid IPL report. On s390, a kdump kernel, its initrd and IPL report if present are loaded into a special and reserved on boot memory region - crashkernel. When a system crashes and kdump was activated before, the purgatory code is entered first which swaps the crashkernel and [0 - crashkernel size] memory regions. Only after that the kdump kernel is entered. For this reason, the pointer to an IPL report in lowcore must point to the IPL report after the swap and not to the address of the IPL report that was located in crashkernel memory region before the swap. Failing to do so, makes the kdump's decompressor try to read memory from the crashkernel memory region which already contains the production's kernel memory. The situation described above caused spontaneous kdump failures/hangs on systems where the Secure IPL is activated because on such systems an IPL report is always present. In that case kdump's decompressor tried to parse an IPL report which frequently lead to illegal memory accesses because an IPL report contains addresses to various data. Cc: <stable@vger.kernel.org> Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel") Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-10wifi: mac80211: fix MLO + AP_VLAN checkFelix Fietkau1-1/+3
Instead of preventing adding AP_VLAN to MLO enabled APs, this check was preventing adding more than one 4-addr AP_VLAN regardless of the MLO status. Fix this by adding missing extra checks. Fixes: ae960ee90bb1 ("wifi: mac80211: prevent VLANs on MLDs") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20221214130326.37756-1-nbd@nbd.name Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-10mac80211: Fix MLO address translation for multiple bss caseSriram R1-0/+3
When multiple interfaces are present in the local interface list, new skb copy is taken before rx processing except for the first interface. The address translation happens each time only on the original skb since the hdr pointer is not updated properly to the newly created skb. As a result frames start to drop in userspace when address based checks or search fails. Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/20221208040050.25922-1-quic_srirrama@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-10wifi: mac80211: reset multiple BSSID options in stop_ap()Aloka Dixit1-0/+7
Reset multiple BSSID options when all AP related configurations are reset in ieee80211_stop_ap(). Stale values result in HWSIM test failures (e.g. p2p_group_cli_invalid), if run after 'he_ap_ema'. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20221221185616.11514-1-quic_alokad@quicinc.com Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-10wifi: mac80211: Fix iTXQ AMPDU fragmentation handlingAlexander Wetzel3-14/+37
mac80211 must not enable aggregation wile transmitting a fragmented MPDU. Enforce that for mac80211 internal TX queues (iTXQs). Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/oe-lkp/202301021738.7cd3e6ae-oliver.sang@intel.com Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20230106223141.98696-1-alexander@wetzel-home.de Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-10wifi: mac80211: sdata can be NULL during AMPDU startAlexander Wetzel2-1/+8
ieee80211_tx_ba_session_handle_start() may get NULL for sdata when a deauthentication is ongoing. Here a trace triggering the race with the hostapd test multi_ap_fronthaul_on_ap: (gdb) list *drv_ampdu_action+0x46 0x8b16 is in drv_ampdu_action (net/mac80211/driver-ops.c:396). 391 int ret = -EOPNOTSUPP; 392 393 might_sleep(); 394 395 sdata = get_bss_sdata(sdata); 396 if (!check_sdata_in_driver(sdata)) 397 return -EIO; 398 399 trace_drv_ampdu_action(local, sdata, params); 400 wlan0: moving STA 02:00:00:00:03:00 to state 3 wlan0: associated wlan0: deauthenticating from 02:00:00:00:03:00 by local choice (Reason: 3=DEAUTH_LEAVING) wlan3.sta1: Open BA session requested for 02:00:00:00:00:00 tid 0 wlan3.sta1: dropped frame to 02:00:00:00:00:00 (unauthorized port) wlan0: moving STA 02:00:00:00:03:00 to state 2 wlan0: moving STA 02:00:00:00:03:00 to state 1 wlan0: Removed STA 02:00:00:00:03:00 wlan0: Destroyed STA 02:00:00:00:03:00 BUG: unable to handle page fault for address: fffffffffffffb48 PGD 11814067 P4D 11814067 PUD 11816067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 2 PID: 133397 Comm: kworker/u16:1 Tainted: G W 6.1.0-rc8-wt+ #59 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Workqueue: phy3 ieee80211_ba_session_work [mac80211] RIP: 0010:drv_ampdu_action+0x46/0x280 [mac80211] Code: 53 48 89 f3 be 89 01 00 00 e8 d6 43 bf ef e8 21 46 81 f0 83 bb a0 1b 00 00 04 75 0e 48 8b 9b 28 0d 00 00 48 81 eb 10 0e 00 00 <8b> 93 58 09 00 00 f6 c2 20 0f 84 3b 01 00 00 8b 05 dd 1c 0f 00 85 RSP: 0018:ffffc900025ebd20 EFLAGS: 00010287 RAX: 0000000000000000 RBX: fffffffffffff1f0 RCX: ffff888102228240 RDX: 0000000080000000 RSI: ffffffff918c5de0 RDI: ffff888102228b40 RBP: ffffc900025ebd40 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888118c18ec0 R13: 0000000000000000 R14: ffffc900025ebd60 R15: ffff888018b7efb8 FS: 0000000000000000(0000) GS:ffff88817a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffb48 CR3: 0000000105228006 CR4: 0000000000170ee0 Call Trace: <TASK> ieee80211_tx_ba_session_handle_start+0xd0/0x190 [mac80211] ieee80211_ba_session_work+0xff/0x2e0 [mac80211] process_one_work+0x29f/0x620 worker_thread+0x4d/0x3d0 ? process_one_work+0x620/0x620 kthread+0xfb/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20221230121850.218810-2-alexander@wetzel-home.de Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-10wifi: mac80211: Proper mark iTXQs for resumptionAlexander Wetzel6-54/+21
When a running wake_tx_queue() call is aborted due to a hw queue stop the corresponding iTXQ is not always correctly marked for resumption: wake_tx_push_queue() can stops the queue run without setting @IEEE80211_TXQ_STOP_NETIF_TX. Without the @IEEE80211_TXQ_STOP_NETIF_TX flag __ieee80211_wake_txqs() will not schedule a new queue run and remaining frames in the queue get stuck till another frame is queued to it. Fix the issue for all drivers - also the ones with custom wake_tx_queue callbacks - by moving the logic into ieee80211_tx_dequeue() and drop the redundant @txqs_stopped. @IEEE80211_TXQ_STOP_NETIF_TX is also renamed to @IEEE80211_TXQ_DIRTY to better describe the flag. Fixes: c850e31f79f0 ("wifi: mac80211: add internal handler for wake_tx_queue") Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20221230121850.218810-1-alexander@wetzel-home.de Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-10wifi: mac80211: fix initialization of rx->link and rx->link_staFelix Fietkau1-123/+99
There are some codepaths that do not initialize rx->link_sta properly. This causes a crash in places which assume that rx->link_sta is valid if rx->sta is valid. One known instance is triggered by __ieee80211_rx_h_amsdu being called from fast-rx. It results in a crash like this one: BUG: kernel NULL pointer dereference, address: 00000000000000a8 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP PTI CPU: 1 PID: 506 Comm: mt76-usb-rx phy Tainted: G E 6.1.0-debian64x+1.7 #3 Hardware name: ZOTAC ZBOX-ID92/ZBOX-IQ01/ZBOX-ID92/ZBOX-IQ01, BIOS B220P007 05/21/2014 RIP: 0010:ieee80211_deliver_skb+0x62/0x1f0 [mac80211] Code: 00 48 89 04 24 e8 9e a7 c3 df 89 c0 48 03 1c c5 a0 ea 39 a1 4c 01 6b 08 48 ff 03 48 83 7d 28 00 74 11 48 8b 45 30 48 63 55 44 <48> 83 84 d0 a8 00 00 00 01 41 8b 86 c0 11 00 00 8d 50 fd 83 fa 01 RSP: 0018:ffff999040803b10 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffffb9903f496480 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff999040803ce0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8d21828ac900 R13: 000000000000004a R14: ffff8d2198ed89c0 R15: ffff8d2198ed8000 FS: 0000000000000000(0000) GS:ffff8d24afe80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a8 CR3: 0000000429810002 CR4: 00000000001706e0 Call Trace: <TASK> __ieee80211_rx_h_amsdu+0x1b5/0x240 [mac80211] ? ieee80211_prepare_and_rx_handle+0xcdd/0x1320 [mac80211] ? __local_bh_enable_ip+0x3b/0xa0 ieee80211_prepare_and_rx_handle+0xcdd/0x1320 [mac80211] ? prepare_transfer+0x109/0x1a0 [xhci_hcd] ieee80211_rx_list+0xa80/0xda0 [mac80211] mt76_rx_complete+0x207/0x2e0 [mt76] mt76_rx_poll_complete+0x357/0x5a0 [mt76] mt76u_rx_worker+0x4f5/0x600 [mt76_usb] ? mt76_get_min_avg_rssi+0x140/0x140 [mt76] __mt76_worker_fn+0x50/0x80 [mt76] kthread+0xed/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Since the initialization of rx->link and rx->link_sta is rather convoluted and duplicated in many places, clean it up by using a helper function to set it. Fixes: ccdde7c74ffd ("wifi: mac80211: properly implement MLO key handling") Fixes: b320d6c456ff ("wifi: mac80211: use correct rx link_sta instead of default") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20221230200747.19040-1-nbd@nbd.name [remove unnecessary rx->sta->sta.mlo check] Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-10Merge tag '6.2-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds4-6/+16
Pull ksmb server fixes from Steve French: - fix possible infinite loop in socket handler - fix possible panic in ntlmv2 authentication - fix error handling on tree connect * tag '6.2-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: fix infinite loop in ksmbd_conn_handler_loop() ksmbd: check nt_len to be at least CIFS_ENCPWD_SIZE in ksmbd_decode_ntlmssp_auth_blob ksmbd: send proper error response in smb2_tree_connect()
2023-01-10sh/mm: Fix pmd_t for realPeter Zijlstra1-1/+1
Because typing is hard... Fixes: 0862ff059c9e ("sh/mm: Make pmd_t similar to pte_t") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-01-10octeontx2-pf: Fix resource leakage in VF driver unbindHariprasad Kelam1-0/+2
resources allocated like mcam entries to support the Ntuple feature and hash tables for the tc feature are not getting freed in driver unbind. This patch fixes the issue. Fixes: 2da489432747 ("octeontx2-pf: devlink params support to set mcam entry count") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Link: https://lore.kernel.org/r/20230109061325.21395-1-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10Merge branch 'selftests-net-isolate-l2_tos_ttl_inherit-sh-in-its-own-netns'Paolo Abeni1-73/+129
Guillaume Nault says: ==================== selftests/net: Isolate l2_tos_ttl_inherit.sh in its own netns. l2_tos_ttl_inherit.sh uses a veth pair to run its tests, but only one of the veth interfaces runs in a dedicated netns. The other one remains in the initial namespace where the existing network configuration can interfere with the setup used for the tests. Isolate both veth devices in their own netns and ensure everything gets cleaned up when the script exits. Link: https://lore.kernel.org/netdev/924f1062-ab59-9b88-3b43-c44e73a30387@alu.unizg.hr/ ==================== Link: https://lore.kernel.org/r/cover.1673191942.git.gnault@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.Guillaume Nault1-4/+36
Use 'set -e' and an exit handler to stop the script if a command fails and ensure the test environment is cleaned up in any case. Also, handle the case where the script is interrupted by SIGINT. The only command that's expected to fail is 'wait $ping_pid', since it's killed by the script. Handle this case with '|| true' to make it play well with 'set -e'. Finally, return the Kselftest SKIP code (4) when the script breaks because of an environment problem or a command line failure. The 0 and 1 return codes should now reliably indicate that all tests have been run (0: all tests run and passed, 1: all tests run but at least one failed, 4: test script didn't run completely). Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting") Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.Guillaume Nault1-69/+93
This selftest currently runs half in the current namespace and half in a netns of its own. Therefore, the test can fail if the current namespace is already configured with incompatible parameters (for example if it already has a veth0 interface). Adapt the script to put both ends of the veth pair in their own netns. Now veth0 is created in NS0 instead of the current namespace, while veth1 is set up in NS1 (instead of the 'testing' netns). The user visible netns names are randomised to minimise the risk of conflicts with already existing namespaces. The cleanup() function doesn't need to remove the virtual interface anymore: deleting NS0 and NS1 automatically removes the virtual interfaces they contained. We can remove $ns, which was only used to run ip commands in the 'testing' netns (let's use the builtin "-netns" option instead). However, we still need a similar functionality as ping and tcpdump now need to run in NS0. So we now have $RUN_NS0 for that. Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting") Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".Guillaume Nault1-4/+4
The ping command can run before DAD completes. In that case, ping may fail and break the selftest. We don't need DAD here since we're working on isolated device pairs. Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-09net/mlx5e: Fix macsec possible null dereference when updating MAC security ↵Emeel Hakim1-7/+2
entity (SecY) Upon updating MAC security entity (SecY) in hw offload path, the macsec security association (SA) initialization routine is called. In case of extended packet number (epn) is enabled the salt and ssci attributes are retrieved using the MACsec driver rx_sa context which is unavailable when updating a SecY property such as encoding-sa hence the null dereference. Fix by using the provided SA to set those attributes. Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-09net/mlx5e: Fix macsec ssci attribute handling in offload pathEmeel Hakim1-3/+7
Currently when macsec offload is set with extended packet number (epn) enabled, the driver wrongly deduce the short secure channel identifier (ssci) from the salt instead of the stand alone ssci attribute as it should, consequently creating a mismatch between the kernel and driver's ssci values. Fix by using the ssci value from the relevant attribute. Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-09net/mlx5: E-switch, Coverity: overlapping copyShay Drory1-4/+0
When a capability is set via port function caps callbacks, a memcpy() is performed in which the source and the target are the same address, e.g.: the copy is redundant. Hence, Remove it. Discovered by Coverity. Fixes: 7db98396ef45 ("net/mlx5: E-Switch, Implement devlink port function cmds to control RoCE") Fixes: e5b9642a33be ("net/mlx5: E-Switch, Implement devlink port function cmds to control migratable") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-09net/mlx5e: Don't support encap rules with gbp optionGavin Li1-0/+2
Previously, encap rules with gbp option would be offloaded by mistake but driver does not support gbp option offload. To fix this issue, check if the encap rule has gbp option and don't offload the rule Fixes: d8f9dfae49ce ("net: sched: allow flower to match vxlan options") Signed-off-by: Gavin Li <gavinl@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-09net/mlx5: Fix ptp max frequency adjustment rangeRahul Rameshbabu1-1/+1
.max_adj of ptp_clock_info acts as an absolute value for the amount in ppb that can be set for a single call of .adjfine. This means that a single call to .getfine cannot be greater than .max_adj or less than -(.max_adj). Provides correct value for max frequency adjustment value supported by devices. Fixes: 3d8c38af1493 ("net/mlx5e: Add PTP Hardware Clock (PHC) support") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-09net/mlx5e: Fix memory leak on updating vport countersAya Levin1-1/+2
When updating statistics driver queries the vport's counters. On fail, add error path releasing the allocated buffer avoiding memory leak. Fixes: 64b68e369649 ("net/mlx5: Refactor and expand rep vport stat group") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-09net/mlx5e: TC, Restore pkt rate policing supportOz Shlomo1-6/+0
The offending commit removed the support for all packet rate metering. Restore the pkt rate metering support by removing the restriction. Fixes: 3603f26633e7 ("net/mlx5e: TC, allow meter jump control action") Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-09net/mlx5e: TC, ignore match level for post meter rulesOz Shlomo1-0/+1
The post meter table only matches on reg_c5. As such, the inner/outer match levels are irrelevant for the match critieria. The cited patch only sets the outer criteria to none, thus setting the inner match level for encapsulated packets. This caused rules with police action on tunnel devices to not find an existing flow group for the match criteria, thus failing to offload the rule. Set both the inner and outer match levels to none for post_meter rules. Fixes: 0d8c38d44f33 ("net/mlx5e: TC, init post meter rules with branching attributes") Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-09net/mlx5e: IPoIB, Fix child PKEY interface stats on rx pathDragos Tatulea1-1/+1
The current code always does the accounting using the stats from the parent interface (linked in the rq). This doesn't work when there are child interfaces configured. Fix this behavior by always using the stats from the child interface priv. This will also work for parent only interfaces: the child (netdev) and parent netdev (rq->netdev) will point to the same thing. Fixes: be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-09net/mlx5e: IPoIB, Block PKEY interfaces with less rx queues than parentDragos Tatulea1-0/+9
A user is able to configure an arbitrary number of rx queues when creating an interface via netlink. This doesn't work for child PKEY interfaces because the child interface uses the parent receive channels. Although the child shares the parent's receive channels, the number of rx queues is important for the channel_stats array: the parent's rx channel index is used to access the child's channel_stats. So the array has to be at least as large as the parent's rx queue size for the counting to work correctly and to prevent out of bound accesses. This patch checks for the mentioned scenario and returns an error when trying to create the interface. The error is propagated to the user. Fixes: be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-09net/mlx5e: IPoIB, Block queue count configuration when sub interfaces are ↵Dragos Tatulea4-7/+62
present PKEY sub interfaces share the receive queues with the parent interface. While setting the sub interface queue count is not supported, it is currently possible to change the number of queues of the parent interface. Thus we can end up with inconsistent queue sizes between the parent and its sub interfaces. This change disallows setting the queue count on the parent interface when sub interfaces are present. This is achieved by introducing an explicit reference to the parent netdev in the mlx5i_priv of the child interface. An additional counter is also required on the parent side to detect when sub interfaces are attached and for proper cleanup. The rtnl lock is taken during the ethtool op and the sub interface ndo_init/uninit ops. There is no race here around counting the sub interfaces, reading the sub interfaces and setting the number of channels. The ASSERT_RTNL was added to document that. Fixes: be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-09net/mlx5e: Verify dev is present for fix features ndoRoy Novich1-0/+3
The native NIC port net device instance is being used as Uplink representor. While changing profiles private resources are not available, fix features ndo does not check if the netdev is present. Add driver protection to verify private resources are ready. Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode") Signed-off-by: Roy Novich <royno@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-09net/mlx5: Fix command stats access after freeMoshe Shemesh2-12/+3
Command may fail while driver is reloading and can't accept FW commands till command interface is reinitialized. Such command failure is being logged to command stats. This results in NULL pointer access as command stats structure is being freed and reallocated during mlx5 devlink reload (see kernel log below). Fix it by making command stats statically allocated on driver probe. Kernel log: [ 2394.808802] BUG: unable to handle kernel paging request at 000000000002a9c0 [ 2394.810610] PGD 0 P4D 0 [ 2394.811811] Oops: 0002 [#1] SMP NOPTI ... [ 2394.815482] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0 ... [ 2394.829505] Call Trace: [ 2394.830667] _raw_spin_lock_irq+0x23/0x26 [ 2394.831858] cmd_status_err+0x55/0x110 [mlx5_core] [ 2394.833020] mlx5_access_reg+0xe7/0x150 [mlx5_core] [ 2394.834175] mlx5_query_port_ptys+0x78/0xa0 [mlx5_core] [ 2394.835337] mlx5e_ethtool_get_link_ksettings+0x74/0x590 [mlx5_core] [ 2394.836454] ? kmem_cache_alloc_trace+0x140/0x1c0 [ 2394.837562] __rh_call_get_link_ksettings+0x33/0x100 [ 2394.838663] ? __rtnl_unlock+0x25/0x50 [ 2394.839755] __ethtool_get_link_ksettings+0x72/0x150 [ 2394.840862] duplex_show+0x6e/0xc0 [ 2394.841963] dev_attr_show+0x1c/0x40 [ 2394.843048] sysfs_kf_seq_show+0x9b/0x100 [ 2394.844123] seq_read+0x153/0x410 [ 2394.845187] vfs_read+0x91/0x140 [ 2394.846226] ksys_read+0x4f/0xb0 [ 2394.847234] do_syscall_64+0x5b/0x1a0 [ 2394.848228] entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-30 08:57:45 +0000