summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-06-01xen: replace xen_remap() with memremap()Juergen Gross5-14/+8
xen_remap() is used to establish mappings for frames not under direct control of the kernel: for Xenstore and console ring pages, and for grant pages of non-PV guests. Today xen_remap() is defined to use ioremap() on x86 (doing uncached mappings), and ioremap_cache() on Arm (doing cached mappings). Uncached mappings for those use cases are bad for performance, so they should be avoided if possible. As all use cases of xen_remap() don't require uncached mappings (the mapped area is always physical RAM), a mapping using the standard WB cache mode is fine. As sparse is flagging some of the xen_remap() use cases to be not appropriate for iomem(), as the result is not annotated with the __iomem modifier, eliminate xen_remap() completely and replace all use cases with memremap() specifying the MEMREMAP_WB caching mode. xen_unmap() can be replaced with memunmap(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20220530082634.6339-1-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-28MAINTAINERS: Update Xen maintainershipBoris Ostrovsky1-6/+12
Due to time constraints I am stepping down as maintainter. I will stay as reviewer for x86 code (for which create a separate category). Stefano is now maintainer for Xen hypervisor interface and Oleksandr has graciously agreed to become a reviewer. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> Acked-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Link: https://lore.kernel.org/r/1653674225-10447-1-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-27xen: switch gnttab_end_foreign_access() to take a struct page pointerJuergen Gross11-32/+28
Instead of a virtual kernel address use a pointer of the associated struct page as second parameter of gnttab_end_foreign_access(). Most users have that pointer available already and are creating the virtual address from it, risking problems in case the memory is located in highmem. gnttab_end_foreign_access() itself won't need to get the struct page from the address again. Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen: add support for initializing xenstore later as HVM domainLuca Miccio1-20/+71
When running as dom0less guest (HVM domain on ARM) the xenstore event channel is available at domain creation but the shared xenstore interface page only becomes available later on. In that case, wait for a notification on the xenstore event channel, then complete the xenstore initialization later, when the shared page is actually available. The xenstore page has few extra field. Add them to the shared struct. One of the field is "connection", when the connection is ready, it is zero. If the connection is not-zero, wait for a notification. Signed-off-by: Luca Miccio <lucmiccio@gmail.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20220513211938.719341-2-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen: sync xs_wire.h header with upstream xenStefano Stabellini1-4/+33
Sync the xs_wire.h header file in Linux with the one in Xen. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20220513211938.719341-1-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19x86: xen: remove STACK_FRAME_NON_STANDARD from xen_cpuidMaximilian Heyne1-2/+0
Since commit 4d65adfcd119 ("x86: xen: insn: Decode Xen and KVM emulate-prefix signature"), objtool is able to correctly parse the prefixed instruction in xen_cpuid and emit correct orc unwind information. Hence, marking the function as STACKFRAME_NON_STANDARD is no longer needed. This commit is basically a revert of commit 983bb6d254c7 ("x86/xen: Mark xen_cpuid() stack frame as non-standard"). Signed-off-by: Maximilian Heyne <mheyne@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> CC: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20220517162425.100567-1-mheyne@amazon.de Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen-blk{back,front}: Update contact points for buffer_squeeze_duration_ms ↵SeongJae Park2-3/+3
and feature_persistent SeongJae is currently listed as a contact point for some blk{back,front} features, but he will not work for XEN for a while. This commit therefore updates the contact point to his colleague, Maximilian, who is understanding the context and actively working with the features now. Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Maximilian Heyne <mheyne@amazon.de> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20220420072734.1692-1-sj@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/xenbus: eliminate xenbus_grant_ring()Juergen Gross2-48/+19
There is no external user of xenbus_grant_ring() left, so merge it into the only caller xenbus_setup_ring(). Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/sndfront: use xenbus_setup_ring() and xenbus_teardown_ring()Juergen Gross1-34/+10
Simplify sndfront's ring creation and removal via xenbus_setup_ring() and xenbus_teardown_ring(). Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 only Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/usbfront: use xenbus_setup_ring() and xenbus_teardown_ring()Juergen Gross1-46/+15
Simplify xen-hcd's ring creation and removal via xenbus_setup_ring() and xenbus_teardown_ring(). Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/scsifront: use xenbus_setup_ring() and xenbus_teardown_ring()Juergen Gross1-21/+7
Simplify scsifront's ring creation and removal via xenbus_setup_ring() and xenbus_teardown_ring(). Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/pcifront: use xenbus_setup_ring() and xenbus_teardown_ring()Juergen Gross1-16/+3
Simplify pcifront's shared page creation and removal via xenbus_setup_ring() and xenbus_teardown_ring(). Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/drmfront: use xenbus_setup_ring() and xenbus_teardown_ring()Juergen Gross1-32/+11
Simplify drmfront's ring creation and removal via xenbus_setup_ring() and xenbus_teardown_ring(). Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 only Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/tpmfront: use xenbus_setup_ring() and xenbus_teardown_ring()Juergen Gross1-15/+3
Simplify tpmfront's ring creation and removal via xenbus_setup_ring() and xenbus_teardown_ring(), which are provided exactly for the use pattern as seen in this driver. Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/netfront: use xenbus_setup_ring() and xenbus_teardown_ring()Juergen Gross1-41/+12
Simplify netfront's ring creation and removal via xenbus_setup_ring() and xenbus_teardown_ring(). Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/blkfront: use xenbus_setup_ring() and xenbus_teardown_ring()Juergen Gross1-29/+8
Simplify blkfront's ring creation and removal via xenbus_setup_ring() and xenbus_teardown_ring(). Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/xenbus: add xenbus_setup_ring() service functionJuergen Gross2-0/+73
Most PV device frontends share very similar code for setting up shared ring buffers: - allocate page(s) - init the ring admin data - give the backend access to the ring via grants Tearing down the ring requires similar actions in all frontends again: - remove grants - free the page(s) Provide service functions xenbus_setup_ring() and xenbus_teardown_ring() for that purpose. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen: update ring.hJuergen Gross2-7/+16
Update include/xen/interface/io/ring.h to its newest version. Switch the two improper use cases of RING_HAS_UNCONSUMED_RESPONSES() to XEN_RING_NR_UNCONSUMED_RESPONSES() in order to avoid the nasty XEN_RING_HAS_UNCONSUMED_IS_BOOL #define. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/shbuf: switch xen-front-pgdir-shbuf to use INVALID_GRANT_REFJuergen Gross1-13/+5
Instead of using a private macro for an invalid grant reference use the common one. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 only Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/dmabuf: switch gntdev-dmabuf to use INVALID_GRANT_REFJuergen Gross1-11/+2
Instead of using a private macro for an invalid grant reference use the common one. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/sound: switch xen_snd_front to use INVALID_GRANT_REFJuergen Gross2-11/+2
Instead of using a private macro for an invalid grant reference use the common one. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 only Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/drm: switch xen_drm_front to use INVALID_GRANT_REFJuergen Gross2-11/+2
Instead of using a private macro for an invalid grant reference use the common one. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 only Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/usb: switch xen-hcd to use INVALID_GRANT_REFJuergen Gross1-8/+6
Instead of using a private macro for an invalid grant reference use the common one. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/scsifront: remove unused GRANT_INVALID_REF definitionJuergen Gross1-3/+0
GRANT_INVALID_REF isn't used in scsifront, so remove it. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/netfront: switch netfront to use INVALID_GRANT_REFJuergen Gross1-19/+17
Instead of using a private macro for an invalid grant reference use the common one. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/blkfront: switch blkfront to use INVALID_GRANT_REFJuergen Gross1-14/+12
Instead of using a private macro for an invalid grant reference use the common one. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/grant-table: never put a reserved grant on the free listJuergen Gross1-0/+4
Make sure a reserved grant is never put on the free list, as this could cause hard to debug errors. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen: update grant_table.hJuergen Gross3-68/+103
Update include/xen/interface/grant_table.h to its newest version. This allows to drop some private definitions in grant-table.c and include/xen/grant_table.h. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/scsifront: harden driver against malicious backendJuergen Gross1-28/+76
Instead of relying on a well behaved PV scsi backend verify all meta data received from the backend and avoid multiple reads of the same data from the shared ring page. In case any illegal data from the backend is detected switch the PV device to a new "error" state and deactivate it for further use. Use the "lateeoi" variant for the event channel in order to avoid event storms blocking the guest. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20220428075323.12853-5-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/scsifront: use new command result macrosJuergen Gross1-8/+56
Add a translation layer for the command result values. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20220428075323.12853-4-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/scsiback: use new command result macrosJuergen Gross1-3/+79
Instead of using the kernel's values for the result of PV scsi operations use the values of the interface definition. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20220428075323.12853-3-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen: update vscsiif.hJuergen Gross1-4/+129
Update include/xen/interface/io/vscsiif.h to its newest version. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20220428075323.12853-2-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-15Linux 5.18-rc7v5.18-rc7Linus Torvalds1-1/+1
2022-05-15Merge tag 'driver-core-5.18-rc7' of ↵Linus Torvalds2-3/+21
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here is one fix, and three documentation updates for 5.18-rc7. The fix is for the firmware loader which resolves a long-reported problem where the credentials of the firmware loader could be set to a userspace process without enough permissions to actually load the firmware image. Many Android vendors have been reporting this for quite some time. The documentation updates are for the embargoed-hardware-issues.rst file to add a new entry, change an existing one, and sort the list to make changes easier in the future. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation/process: Update ARM contact for embargoed hardware issues Documentation/process: Add embargoed HW contact for Ampere Computing Documentation/process: Make groups alphabetical and use tabs consistently firmware_loader: use kernel credentials when reading firmware
2022-05-15Merge tag 'char-misc-5.18-rc7' of ↵Linus Torvalds2-3/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are two small driver fixes for 5.18-rc7 that resolve reported problems: - slimbus driver irq bugfix - interconnect sync state bugfix Both of these have been in linux-next with no reported problems" * tag 'char-misc-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: slimbus: qcom: Fix IRQ check in qcom_slim_probe interconnect: Restore sync state by ignoring ipa-virt in provider count
2022-05-15Merge tag 'tty-5.18-rc7' of ↵Linus Torvalds4-29/+43
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty n_gsm and serial driver fixes for 5.18-rc7 that resolve reported problems. They include: - n_gsm fixes for reported issues - 8250_mtk driver fixes for some platforms - fsl_lpuart driver fix for reported problem. - digicolor driver fix for reported problem. All have been in linux-next for a while with no reported problems" * tag 'tty-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: fsl_lpuart: Don't enable interrupts too early tty: n_gsm: fix invalid gsmtty_write_room() result tty: n_gsm: fix mux activation issues in gsm_config() tty: n_gsm: fix buffer over-read in gsm_dlci_data() serial: 8250_mtk: Fix register address for XON/XOFF character serial: 8250_mtk: Make sure to select the right FEATURE_SEL serial: 8250_mtk: Fix UART_EFR register address tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
2022-05-15Merge tag 'usb-5.18-rc7' of ↵Linus Torvalds13-75/+86
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small fixes for reported issues with some USB drivers. They include: - xhci fixes for xhci-mtk platform driver - typec driver fixes for reported problems. - cdc-wdm read-stuck fix - gadget driver fix for reported race condition - new usb-serial driver ids All of these have been in linux-next with no reported problems" * tag 'usb-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: xhci-mtk: remove bandwidth budget table usb: xhci-mtk: fix fs isoc's transfer error usb: gadget: fix race when gadget driver register via ioctl usb: typec: tcpci_mt6360: Update for BMC PHY setting usb: gadget: uvc: allow for application to cleanly shutdown usb: typec: tcpci: Don't skip cleanup in .remove() on error usb: cdc-wdm: fix reading stuck on device close USB: serial: qcserial: add support for Sierra Wireless EM7590 USB: serial: option: add Fibocom MA510 modem USB: serial: option: add Fibocom L610 modem USB: serial: pl2303: add device id for HP LM930 Display
2022-05-15Merge tag 'powerpc-5.18-5' of ↵Linus Torvalds1-5/+21
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: - Fix KVM PR on 32-bit, which was broken by some MMU code refactoring. Thanks to: Alexander Graf, and Matt Evans. * tag 'powerpc-5.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S PR: Enable MSR_DR for switch_mmu_context()
2022-05-15Merge tag 'x86-urgent-2022-05-15' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "A single fix for the handling of unpopulated sub-pmd spaces. The copy & pasta from the corresponding s390 code screwed up the address calculation for marking the sub-pmd ranges via memset by omitting the ALIGN_DOWN() to calculate the proper start address. It's a mystery why this code is not generic and shared because there is nothing architecture specific in there, but that's too intrusive for a backportable fix" * tag 'x86-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix marking of unused sub-pmd ranges
2022-05-15Merge tag 'sched-urgent-2022-05-15' of ↵Linus Torvalds9-21/+21
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Thomas Gleixner: "The recent expansion of the sched switch tracepoint inserted a new argument in the middle of the arguments. This reordering broke BPF programs which relied on the old argument list. While tracepoints are not considered stable ABI, it's not trivial to make BPF cope with such a change, but it's being worked on. For now restore the original argument order and move the new argument to the end of the argument list" * tag 'sched-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/tracing: Append prev_state to tp args instead
2022-05-15Merge tag 'irq-urgent-2022-05-15' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "A single fix for a recent (introduced in 5.16) regression in the core interrupt code. The consolidation of the interrupt handler invocation code added an unconditional warning when generic_handle_domain_irq() is invoked from outside hard interrupt context. That's overbroad as the requirement for invoking these handlers in hard interrupt context is only required for certain interrupt types. The subsequently called code already contains a warning which triggers conditionally for interrupt chips which indicate this requirement in their properties. Remove the overbroad one" * tag 'irq-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Remove WARN_ON_ONCE() in generic_handle_domain_irq()
2022-05-14Merge tag 'perf-tools-fixes-for-v5.18-2022-05-14' of ↵Linus Torvalds4-3/+13
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix two NDEBUG warnings in 'perf bench numa' - Fix ARM coresight `perf test` failure - Sync linux/kvm.h with the kernel sources - Add James and Mike as Arm64 performance events reviewers * tag 'perf-tools-fixes-for-v5.18-2022-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: MAINTAINERS: Add James and Mike as Arm64 performance events reviewers tools headers UAPI: Sync linux/kvm.h with the kernel sources perf tests: Fix coresight `perf test` failure. perf bench: Fix two numa NDEBUG warnings
2022-05-13Merge tag 'drm-fixes-2022-05-14' of git://anongit.freedesktop.org/drm/drmLinus Torvalds15-40/+99
Pull more drm fixes from Dave Airlie: "Turns out I was right, some fixes hadn't made it to me yet. The vmwgfx ones also popped up later, but all seem like bad enough things to fix. The dma-buf, vc4 and nouveau ones are all pretty small. The fbdev fixes are a bit more complicated: a fix to cleanup fbdev devices properly, uncovered some use-after-free bugs in existing drivers. Then the fix for those bugs wasn't correct. This reverts that fix, and puts the proper fixes in place in the drivers to avoid the use-after-frees. This has had a fair number of eyes on it at this stage, and I'm confident enough that it puts things in the right place, and is less dangerous than reverting our way out of the initial change at this stage. fbdev: - revert NULL deref fix that turned into a use-after-free - prevent use-after-free in fbdev - efifb/simplefb/vesafb: fix cleanup paths to avoid use-after-frees dma-buf: - fix panic in stats setup vc4: - fix hdmi build nouveau: - tegra iommu present fix - fix leak in backlight name vmwgfx: - Black screen due to fences using FIFO checks on SVGA3 - Random black screens on boot due to uninitialized drm_mode_fb_cmd2 - Hangs on SVGA3 due to command buffers being used with gbobjects" * tag 'drm-fixes-2022-05-14' of git://anongit.freedesktop.org/drm/drm: drm/vmwgfx: Disable command buffers on svga3 without gbobjects drm/vmwgfx: Initialize drm_mode_fb_cmd2 drm/vmwgfx: Fix fencing on SVGAv3 drm/vc4: hdmi: Fix build error for implicit function declaration dma-buf: call dma_buf_stats_setup after dmabuf is in valid list fbdev: efifb: Fix a use-after-free due early fb_info cleanup drm/nouveau: Fix a potential theorical leak in nouveau_get_backlight_name() drm/nouveau/tegra: Stop using iommu_present() fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove fbdev: efifb: Cleanup fb_info in .fb_destroy rather than .remove fbdev: simplefb: Cleanup fb_info in .fb_destroy rather than .remove fbdev: Prevent possible use-after-free in fb_release() Revert "fbdev: Make fb_release() return -ENODEV if fbdev was unregistered"
2022-05-14Merge tag 'drm-misc-fixes-2022-05-13' of ↵Dave Airlie9-16/+38
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Multiple fixes to fbdev to address a regression at unregistration, an iommu detection improvement for nouveau, a memory leak fix for nouveau, pointer dereference fix for dma_buf_file_release(), and a build breakage fix for vc4 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220513073044.ymayac7x7bzatrt7@houat
2022-05-14Merge tag 'vmwgfx-drm-fixes-5.18-2022-05-13' of ↵Dave Airlie6-24/+61
https://gitlab.freedesktop.org/zack/vmwgfx into drm-fixes vmwgfx fixes for: - Black screen due to fences using FIFO checks on SVGA3 - Random black screens on boot due to uninitialized drm_mode_fb_cmd2 - Hangs on SVGA3 due to command buffers being used with gbobjects Signed-off-by: Dave Airlie <airlied@redhat.com> From: Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/a1d32799e4c74b8540216376d7576bb783ca07ba.camel@vmware.com
2022-05-13Merge tag 'gfs2-v5.18-rc4-fix3' of ↵Linus Torvalds2-82/+68
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fixes from Andreas Gruenbacher: "We've finally identified commit dc732906c245 ("gfs2: Introduce flag for glock holder auto-demotion") to be the other cause of the filesystem corruption we've been seeing. This feature isn't strictly necessary anymore, so we've decided to stop using it for now. With this and the gfs_iomap_end rounding fix you've already seen ("gfs2: Fix filesystem block deallocation for short writes" in this pull request), we're corruption free again now. - Fix filesystem block deallocation for short writes. - Stop using glock holder auto-demotion for now. - Get rid of buffered writes inefficiencies due to page faults being disabled. - Minor other cleanups" * tag 'gfs2-v5.18-rc4-fix3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Stop using glock holder auto-demotion for now gfs2: buffered write prefaulting gfs2: Align read and write chunks to the page cache gfs2: Pull return value test out of should_fault_in_pages gfs2: Clean up use of fault_in_iov_iter_{read,write}able gfs2: Variable rename gfs2: Fix filesystem block deallocation for short writes
2022-05-13gfs2: Stop using glock holder auto-demotion for nowAndreas Gruenbacher1-32/+14
We're having unresolved issues with the glock holder auto-demotion mechanism introduced in commit dc732906c245. This mechanism was assumed to be essential for avoiding frequent short reads and writes until commit 296abc0d91d8 ("gfs2: No short reads or writes upon glock contention"). Since then, when the inode glock is lost, it is simply re-acquired and the operation is resumed. This means that apart from the performance penalty, we might as well drop the inode glock before faulting in pages, and re-acquire it afterwards. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2022-05-13gfs2: buffered write prefaultingAndreas Gruenbacher1-12/+16
In gfs2_file_buffered_write, to increase the likelihood that all the user memory we're trying to write will be resident in memory, carry out the write in chunks and fault in each chunk of user memory before trying to write it. Otherwise, some workloads will trigger frequent short "internal" writes, causing filesystem blocks to be allocated and then partially deallocated again when writing into holes, which is wasteful and breaks reservations. Neither the chunked writes nor any of the short "internal" writes are user visible. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2022-05-13Merge tag 'scsi-fixes' of ↵Linus Torvalds4-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four fixes, all in drivers. These patches mosly fix error legs and exceptional conditions (scsi_dh_alua, qla2xxx). The lpfc fixes are for coding issues with lpfc features" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Correct BDE DMA address assignment for GEN_REQ_WQE scsi: lpfc: Fix split code for FLOGI on FCoE scsi: qla2xxx: Fix missed DMA unmap for aborted commands scsi: scsi_dh_alua: Properly handle the ALUA transitioning state
2022-05-13gfs2: Align read and write chunks to the page cacheAndreas Gruenbacher1-8/+7
Align the chunks that reads and writes are carried out in to the page cache rather than the user buffers. This will be more efficient in general, especially for allocating writes. Optimizing the case that the user buffer is gfs2 backed isn't very useful; we only need to make sure we won't deadlock. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 22:23:35 +0000