summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-09-10regulator: fan53555: remove vsel_max not usedYunfan Zhang1-3/+0
The max voltage will be bounded by min_uV, uV_step and n_voltages, so remove it to avoid confusing. Signed-off-by: Yunfan Zhang <yfzhang@marvell.com> Reviewed-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-10regulator: aat2870: Don't explicitly initialise the first fieldMark Brown1-1/+1
Doing so generates a warning as the first field is a pointer but we use 0 to initalize it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-10regulator: Fairchild fan53555 supportYunfan Zhang4-0/+397
This driver supports Fairchild FAN53555 Digitally Programmable TinyBuck Regulator. The FAN53555 is a step-down switching voltage regulator that delivers a digitally programmable output from an input voltage supply of 2.5V to 5.5V. The output voltage is programmed through an I2C interface. Signed-off-by: Yunfan Zhang <yfzhang@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-09regulator: twl: Remove another unused variable warningMark Brown1-7/+0
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-06regulator: lp872x: remove unnecessary functionKim, Milo1-28/+0
The lp872x_check_dvs_validity() is used for checking DVS platform data. If the DVS platform data is not defined, return as error code. Now, this is unnecessary because the default DVS mode is set in this case. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-06regulator: lp872x: fix NULL pointer access problemKim, Milo1-4/+4
The lp872x_set_dvs() is used for changing the DVS pin state. This function works only when the DVS platform data is defined. So don't assume that DVS data is always valid. In case the platform data is not defined, the DVS data is set to NULL for skipping the DVS pin control. DVS selection and GPIO pin number are used for the LP872x DVS pin control. For better readability, DVS selection argument is added in lp872x_set_dvs(). Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-06regulator: lp872x: initialize the DVS modeKim, Milo1-2/+3
The platform specific configuration(general_config) is optional. However, the DVS settings should be configured explicitly while loading the driver. This patch enables configuring the default DVS mode even though the platform data is not defined. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-06regulator: lp872x: set the default DVS modeKim, Milo1-1/+14
The lp872x driver has the DVS platform data which select the register address of the BUCK voltage. This patch enables updating the default DVS mode when the DVS platform data is not defined. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-06regulator: lp872x: remove regulator platform data dependencyKim, Milo1-9/+7
This patch enables registering the regulator driver even though the regulator_init_data is not defined in the platform side. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: mc13783: add regulators sw1x and sw2xGaëtan Carlier1-0/+66
Signed-off-by: Gaëtan Carlier <gcembed@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: max8907: Add MODULE_ALIASAxel Lin1-0/+1
This driver can be built as a module, add MODULE_ALIAS for it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: max8907: fix use of possibly NULL idataStephen Warren1-1/+4
If a regulator is not used by a board, it's quite legitimate not to provide platform data or a device tree node to configure it (i.e. regulator_init_data). In that case, during MAX8907 regulator's probe(), the idata variable will be NULL for that regulator. Prevent dereferincing it. If the MBATT regulator's init_data is not specified, or no name was specified in the constraints, the regulator will be named based on the regulator descriptor, so initialize mbatt_rail_name from there. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: fix kernel-doc warnings in drivers/regulator/core.cRandy Dunlap1-2/+2
Fix regulator kernel-doc warnings: Warning(drivers/regulator/core.c:2308): No description found for parameter 'rdev' Warning(drivers/regulator/core.c:2308): Excess function parameter 'regulator' description in 'regulator_set_voltage_time_sel' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: ab8500: provide per-regulator shiftLinus Walleij1-10/+10
This encodes the voltage shifts (the number of bits to shift the register to get to the selector) into the regulator info. We have several new variants of the AB8500 so this varies a lot. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: max8907: fix compile error when !CONFIG_OFStephen Warren1-2/+22
Fix the following: CC [M] drivers/regulator/max8907-regulator.o drivers/regulator/max8907-regulator.c: In function 'max8907_regulator_probe': drivers/regulator/max8907-regulator.c:297:12: error: 'max8907_matches' undeclared (first use in this function) by removing direct references to max8907_matches[], which only exists when CONFIG_OF is defined. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: max8907: Properly set pmic pointer in max8907_regulator_remove()Axel Lin1-1/+1
Add missing platform_get_drvdata() call in max8907_regulator_remove(), this fixes below build warning: CC [M] drivers/regulator/max8907-regulator.o drivers/regulator/max8907-regulator.c: In function 'max8907_regulator_remove': drivers/regulator/max8907-regulator.c:353:23: warning: 'pmic' is used uninitialized in this function [-Wuninitialized] Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: max8907: Fix n_voltages for MAX8907B SD1Axel Lin1-1/+2
For linear voltage mapping, the n_voltages is (max - min) / step + 1 Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: using kfree() requires including slab.hStephen Rothwell1-0/+2
Fixes this build error: drivers/regulator/twl-regulator.c: In function 'twlreg_probe': drivers/regulator/twl-regulator.c:1229:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration] Also added string.h for kmemdup(). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: add MAX8907 driverGyungoh Yoo3-0/+392
The MAX8907 is an I2C-based power-management IC containing voltage regulators, a reset controller, a real-time clock, and a touch-screen controller. The original driver was written by: * Gyungoh Yoo <jack.yoo@maxim-ic.com> Various fixes and enhancements by: * Jin Park <jinyoungp@nvidia.com> * Tom Cherry <tcherry@nvidia.com> * Prashant Gaikwad <pgaikwad@nvidia.com> * Dan Willemsen <dwillemsen@nvidia.com> * Laxman Dewangan <ldewangan@nvidia.com> During upstreaming, I (swarren): * Converted to regmap. * Allowed probing from device tree. * Reworked the regulator driver to be represented as a single device that provides multiple regulators, rather than as a device per regulator. * Replaced many regulator ops with standard functions. * Added ability to specify supplies for each regulator. * Removed the WLED regulator. If/when we expose this in the driver, it should be a backlight object not a regulator object. * Renamed from max8907c->max8907, since the driver covers at least the C and B revisions. * General cleanup. Signed-off-by: Gyungoh Yoo <jack.yoo@maxim-ic.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: twl: make twl_info tables constArnd Bergmann1-14/+24
I currently carry the series to make of_device_id->data const in the arm-soc tree, which fixes a number of issues, but leaves one new compiler warning about the twl-regulator driver: drivers/regulator/twl-regulator.c: In function 'twlreg_probe': drivers/regulator/twl-regulator.c:1130:8: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] drivers/regulator/twl-regulator.c:1139:9: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] The warning indicates that the driver takes a static table with initialization data for each regulator, modifies the data in place and passes a pointer to that structure to the regulator_register function. This is probably ok because a system contains only one instance of each regulator, but it's still bad style because any driver should be written to support multiple instances of the same hardware. This patch changes the code to dynamically allocate the memory we pass to the regulator core so the table can be constant. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: twl: Remove get_voltage implementation for single voltage regulatorsAxel Lin1-11/+0
This is not required after commit f7df20ec "regulator: core: Use list_voltage() to read single voltage regulators" Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: isl6271a: Remove get_voltage implementation for isl_fixed_opsAxel Lin1-6/+0
This is not required after commit f7df20ec "regulator: core: Use list_voltage() to read single voltage regulators" Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: ab8500: Remove get_voltage implementation for ↵Axel Lin1-6/+0
ab8500_regulator_fixed_ops This is not required after commit f7df20ec "regulator: core: Use list_voltage() to read single voltage regulators" Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: ab3100: Remove get_voltage implementation for regulator_ops_fixedAxel Lin1-6/+0
This is not required after commit f7df20ec "regulator: core: Use list_voltage() to read single voltage regulators" Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: mc13xxx: Remove get_voltage implementation for single voltage ↵Axel Lin4-14/+0
regulators This is not required after commit f7df20ec "regulator: core: Use list_voltage() to read single voltage regulators" Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: Update comment for set_current_limit callback of struct regulator_opsAxel Lin1-0/+1
The regulators should be tending to the maximum in the available range and consumers should specify the widest range possible. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: da9052: set_current_limit should select the maximum current in ↵Axel Lin1-2/+2
specific range Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: lp872x: set_current_limit should select the maximum current in ↵Axel Lin1-10/+8
specific range Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: tps6524x: set_current_limit should select the maximum current in ↵Axel Lin1-6/+4
specific range Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: wm831x-dcdc: set_current_limit should select the maximum current ↵Axel Lin1-6/+5
in specific range Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: max77686: Use array to save pointer to rdevAxel Lin1-19/+9
MAX77686_REGULATORS is known in compile time. Use array to save pointer to rdev makes the code simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: max77686: initialize of_node param for regulator registerAxel Lin2-0/+3
Initialize config.of_node for regulator before registering. This is needed for DT based regulator support. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: ab8500: Set enable enable_time in regulator_descAxel Lin1-9/+1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: wm8400: Simplify set REGULATOR_MODE_IDLE mode in wm8400_dcdc_set_modeAxel Lin1-6/+1
To set REGULATOR_MODE_IDLE mode, what we do is to clear DC1_ACTIVE and DC1_SLEEP bits, this can be done in one wm8400_set_bits() call. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: wm831x-ldo: Check return value of wm831x_reg_read()Axel Lin1-0/+4
wm831x_reg_read() returns negative error code on failure. This prevents using the error code as the value read. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: tps6586x: Convert to ↵Axel Lin1-65/+11
regulator_[enable|disable|is_enabled|get_voltage_sel]_regmap Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: Use BUCK_FPWM_[MASK|SHIFT] macros to replace buck_pmap tableAxel Lin1-43/+12
Below is the buck_pmap mapping table: BUCK1: mask = 1 << 0, shift = 0 BUCK2: mask = 1 << 1, shift = 1 BUCK3: mask = 1 << 2, shift = 2 BUCK4: mask = 1 << 3, shift = 3 The mask and shift can be easily calculated by: mask = 1 << BUCK_ID shift = BUCK_ID This patch defines BUCK_FPWM_MASK and BUCK_FPWM_SHIFT macros to replace buck_pmap mapping table. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com> Tested-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: lp8788-buck: Remove lp8788_set_default_dvs_ctrl_mode functionAxel Lin1-22/+3
We already know the mask in lp8788_init_dvs() function, and we can update the corresponding bit for default_dvs_mode in lp8788_init_dvs() function. This function looks not necessary to me. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com> Tested-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: lp8788-ldo: Set n_voltages to 1 for fixed voltageAxel Lin1-0/+8
For fixed voltage, the n_voltages should be 1 rather than 0. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: mc13892: Convert mc13892_sw_regulator_ops to get_voltage_selAxel Lin1-9/+3
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: mc13892: Simplify implementation of ↵Axel Lin1-27/+15
mc13892_sw_regulator_set_voltage_sel() Use mc13xxx_reg_rmw rather than a mc13xxx_reg_read and a mc13xxx_reg_write calls. This logic to set MC13892_SWITCHERS0_SWxHI bit is pretty simple: if (volt > 1375000) set MC13892_SWITCHERS0_SWxHI bit else if (volt < 1100000) clear MC13892_SWITCHERS0_SWxHI bit else leave MC13892_SWITCHERS0_SWxHI bit untouched We already know the selector, so we don't need to calculate the selector again. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: mc13892: Make mc13892_powermisc_rmw() lock protectedAxel Lin1-14/+8
Then we can remove lock/unlock around the caller. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: mc13783: Make mc13783_powermisc_rmw() lock protectedAxel Lin1-14/+8
Then we can remove lock/unlock around the caller. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: palmas: Convert palmas_ops_ldo to [get|set]_voltage_sel_regmapAxel Lin1-40/+5
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: twl: Convert twlsmps_ops to get_voltage_sel and map_voltageAxel Lin1-11/+13
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: twl: Fix checking voltage range in twl6030smps_set_voltage()Axel Lin1-20/+16
The voltage selection logic is supposed to find the samllest voltage falls within specified range. When using equation to calculate vsel, we need to ensure the requested min_uV meet the range of using the equation. Otherwise we may select a voltage that is out of specified range. For example, in the case vsel = 62 means select voltage of 2100000uV. What we want is to ensure the requested min_uV <= 2100000 rather than checking max_uV >= 2100000. And this also means in the case min_uV > 2100000, vsel = 62 does not meet the request. Also calling twl6030smps_list_voltage() for all cases to ensure the selected voltage still in bounds. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: mc13xxx: Populate selector from mc13xxx_fixed_regulator_set_voltageAxel Lin1-2/+4
This was missing until now and the underlying _regulator_do_set_voltage is using this value when calling list_voltage. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: s2mps11: Use array to save pointer to rdevAxel Lin1-19/+8
The number of regulator is known at compile time, use array to save pointer to rdev makes the code simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22Linux 3.6-rc3v3.6-rc3Linus Torvalds1-1/+1
2012-08-22Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds28-181/+419
Pull drm fixes from Dave Airlie: "Intel: edid fixes, power consumption fix, s/r fix, haswell fix Radeon: BIOS loading fixes for UEFI and Thunderbolt machines, better MSAA validation, lockup timeout fixes, modesetting fixes One udl dpms fix, one vmwgfx fix, a couple of trivial core changes. There is an export added to ACPI as part of the radeon bios fixes. I've also included the fbcon flashing cursor vs deinit race fix, that seems the simplest place to start" Trivial conflict in drivers/video/console/fbcon.c due to me having already applied the fbcon flashing cursor vs deinit race fix, and Dave had added a comment in there too. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits) fbcon: fix race condition between console lock and cursor timer (v1.1) drm: Add missing static storage class specifiers in drm_proc.c file drm/udl: dpms off the crtc when disabled. drm: Remove two unused fields from struct drm_display_mode drm: stop vmgfx driver explosion drm/radeon/ss: use num_crtc rather than hardcoded 6 Revert "drm/radeon: fix bo creation retry path" drm/i915: use hsw rps tuning values everywhere on gen6+ drm/radeon: split ATRM support out from the ATPX handler (v3) drm/radeon: convert radeon vfct code to use acpi_get_table_with_size ACPI: export symbol acpi_get_table_with_size drm/radeon: implement ACPI VFCT vbios fetch (v3) drm/radeon/kms: extend the Fujitsu D3003-S2 board connector quirk to cover later silicon stepping drm/radeon: fix checking of MSAA renderbuffers on r600-r700 drm/radeon: allow CMASK and FMASK in the CS checker on r600-r700 drm/radeon: init lockup timeout on ring init drm/radeon: avoid turning off spread spectrum for used pll drm/i915: fall back to bit-banging if GMBUS fails in CRT EDID reads drm/i915: extract connector update from intel_ddc_get_modes() for reuse drm/i915: fix hsw uncached pte ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-11 23:05:55 +0000