summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-01-18x86/intel_rdt: Add command line parameter to control L2_CDPFenghua Yu2-1/+4
L2 CDP can be controlled by kernel parameter "rdt=". If "rdt=l2cdp", L2 CDP is turned on. If "rdt=!l2cdp", L2 CDP is turned off. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Tony Luck" <tony.luck@intel.com> Cc: Vikas" <vikas.shivappa@intel.com> Cc: Sai Praneeth" <sai.praneeth.prakhya@intel.com> Cc: Reinette" <reinette.chatre@intel.com> Link: https://lkml.kernel.org/r/1513810644-78015-7-git-send-email-fenghua.yu@intel.com
2018-01-18x86/intel_rdt: Enable L2 CDP in MSR IA32_L2_QOS_CFGFenghua Yu2-26/+94
Bit 0 in MSR IA32_L2_QOS_CFG (0xc82) is L2 CDP enable bit. By default, the bit is zero, i.e. L2 CAT is enabled, and L2 CDP is disabled. When the resctrl mount parameter "cdpl2" is given, the bit is set to 1 and L2 CDP is enabled. In L2 CDP mode, the L2 CAT mask MSRs are re-mapped into interleaved pairs of mask MSRs for code (referenced by an odd CLOSID) and data (referenced by an even CLOSID). Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Tony Luck" <tony.luck@intel.com> Cc: Vikas" <vikas.shivappa@intel.com> Cc: Sai Praneeth" <sai.praneeth.prakhya@intel.com> Cc: Reinette" <reinette.chatre@intel.com> Link: https://lkml.kernel.org/r/1513810644-78015-6-git-send-email-fenghua.yu@intel.com
2018-01-18x86/intel_rdt: Add two new resources for L2 Code and Data Prioritization (CDP)Fenghua Yu2-10/+58
L2 data and L2 code are added as new resources in rdt_resources_all[] and data in the resources are configured. When L2 CDP is enabled, the schemata will have the two resources in this format: L2DATA:l2id0=xxxx;l2id1=xxxx;.... L2CODE:l2id0=xxxx;l2id1=xxxx;.... xxxx represent CBM (Cache Bit Mask) values in the schemata, similar to all others (L2 CAT/L3 CAT/L3 CDP). Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Tony Luck" <tony.luck@intel.com> Cc: Vikas" <vikas.shivappa@intel.com> Cc: Sai Praneeth" <sai.praneeth.prakhya@intel.com> Cc: Reinette" <reinette.chatre@intel.com> Link: https://lkml.kernel.org/r/1513810644-78015-5-git-send-email-fenghua.yu@intel.com
2018-01-18x86/intel_rdt: Enumerate L2 Code and Data Prioritization (CDP) featureFenghua Yu2-0/+2
L2 Code and Data Prioritization (CDP) is enumerated in CPUID(EAX=0x10, ECX=0x2):ECX.bit2 Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Tony Luck" <tony.luck@intel.com> Cc: Vikas" <vikas.shivappa@intel.com> Cc: Sai Praneeth" <sai.praneeth.prakhya@intel.com> Cc: Reinette" <reinette.chatre@intel.com> Link: https://lkml.kernel.org/r/1513810644-78015-4-git-send-email-fenghua.yu@intel.com
2018-01-18x86/intel_rdt: Add L2CDP support in documentationFenghua Yu1-2/+5
L2 and L3 Code and Data Prioritization (CDP) can be enabled separately. The existing mount parameter "cdp" is only for enabling L3 CDP and will be kept for backwards compability. Add a new mount parameter 'cdpl2' for L2 CDP. [ tglx: Made changelog readable ] Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Tony Luck" <tony.luck@intel.com> Cc: Vikas" <vikas.shivappa@intel.com> Cc: Sai Praneeth" <sai.praneeth.prakhya@intel.com> Cc: Reinette" <reinette.chatre@intel.com> Link: https://lkml.kernel.org/r/1513810644-78015-3-git-send-email-fenghua.yu@intel.com
2018-01-18x86/intel_rdt: Update documentationFenghua Yu1-1/+7
With more flag bits in /proc/cpuinfo for RDT, it's better to classify the bits for readability. Some previously missing bits are added as well. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Tony Luck" <tony.luck@intel.com> Cc: Vikas" <vikas.shivappa@intel.com> Cc: Sai Praneeth" <sai.praneeth.prakhya@intel.com> Cc: Reinette" <reinette.chatre@intel.com> Link: https://lkml.kernel.org/r/1513810644-78015-2-git-send-email-fenghua.yu@intel.com
2018-01-17Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds13-162/+388
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - A rather involved set of memory hardware encryption fixes to support the early loading of microcode files via the initrd. These are larger than what we normally take at such a late -rc stage, but there are two mitigating factors: 1) much of the changes are limited to the SME code itself 2) being able to early load microcode has increased importance in the post-Meltdown/Spectre era. - An IRQ vector allocator fix - An Intel RDT driver use-after-free fix - An APIC driver bug fix/revert to make certain older systems boot again - A pkeys ABI fix - TSC calibration fixes - A kdump fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic/vector: Fix off by one in error path x86/intel_rdt/cqm: Prevent use after free x86/mm: Encrypt the initrd earlier for BSP microcode update x86/mm: Prepare sme_encrypt_kernel() for PAGE aligned encryption x86/mm: Centralize PMD flags in sme_encrypt_kernel() x86/mm: Use a struct to reduce parameters for SME PGD mapping x86/mm: Clean up register saving in the __enc_copy() assembly code x86/idt: Mark IDT tables __initconst Revert "x86/apic: Remove init_bsp_APIC()" x86/mm/pkeys: Fix fill_sig_info_pkey x86/tsc: Print tsc_khz, when it differs from cpu_khz x86/tsc: Fix erroneous TSC rate on Skylake Xeon x86/tsc: Future-proof native_calibrate_tsc() kdump: Write the correct address of mem_section into vmcoreinfo
2018-01-17Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds3-23/+33
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "A delayacct statistics correctness fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: delayacct: Account blkio completion on the correct task
2018-01-17Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf fix from Ingo Molnar: "An Intel RAPL events fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/rapl: Fix Haswell and Broadwell server RAPL event
2018-01-17Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds3-23/+90
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "Two futex fixes: a input parameters robustness fix, and futex race fixes" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Prevent overflow by strengthen input validation futex: Avoid violating the 10th rule of futex
2018-01-17Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds10-19/+99
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 pti bits and fixes from Thomas Gleixner: "This last update contains: - An objtool fix to prevent a segfault with the gold linker by changing the invocation order. That's not just for gold, it's a general robustness improvement. - An improved error message for objtool which spares tearing hairs. - Make KASAN fail loudly if there is not enough memory instead of oopsing at some random place later - RSB fill on context switch to prevent RSB underflow and speculation through other units. - Make the retpoline/RSB functionality work reliably for both Intel and AMD - Add retpoline to the module version magic so mismatch can be detected - A small (non-fix) update for cpufeatures which prevents cpu feature clashing for the upcoming extra mitigation bits to ease backporting" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: module: Add retpoline tag to VERMAGIC x86/cpufeature: Move processor tracing out of scattered features objtool: Improve error message for bad file argument objtool: Fix seg fault with gold linker x86/retpoline: Add LFENCE to the retpoline/RSB filling RSB macros x86/retpoline: Fill RSB on context switch for affected CPUs x86/kasan: Panic if there is not enough memory to boot
2018-01-17Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A one-liner fix which prevents deferrable timers becoming stale when the system does not switch into NOHZ mode" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Unconditionally check deferrable base
2018-01-17x86/apic/vector: Fix off by one in error pathThomas Gleixner1-2/+5
Keith reported the following warning: WARNING: CPU: 28 PID: 1420 at kernel/irq/matrix.c:222 irq_matrix_remove_managed+0x10f/0x120 x86_vector_free_irqs+0xa1/0x180 x86_vector_alloc_irqs+0x1e4/0x3a0 msi_domain_alloc+0x62/0x130 The reason for this is that if the vector allocation fails the error handling code tries to free the failed vector as well, which causes the above imbalance warning to trigger. Adjust the error path to handle this correctly. Fixes: b5dc8e6c21e7 ("x86/irq: Use hierarchical irqdomain to manage CPU interrupt vectors") Reported-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Keith Busch <keith.busch@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801161217300.1823@nanos
2018-01-17x86/intel_rdt/cqm: Prevent use after freeThomas Gleixner1-4/+4
intel_rdt_iffline_cpu() -> domain_remove_cpu() frees memory first and then proceeds accessing it. BUG: KASAN: use-after-free in find_first_bit+0x1f/0x80 Read of size 8 at addr ffff883ff7c1e780 by task cpuhp/31/195 find_first_bit+0x1f/0x80 has_busy_rmid+0x47/0x70 intel_rdt_offline_cpu+0x4b4/0x510 Freed by task 195: kfree+0x94/0x1a0 intel_rdt_offline_cpu+0x17d/0x510 Do the teardown first and then free memory. Fixes: 24247aeeabe9 ("x86/intel_rdt/cqm: Improve limbo list processing") Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ravi Shankar <ravi.v.shankar@intel.com> Cc: Peter Zilstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: "Roderick W. Smith" <rod.smith@canonical.com> Cc: 1733662@bugs.launchpad.net Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801161957510.2366@nanos
2018-01-17module: Add retpoline tag to VERMAGICAndi Kleen1-1/+7
Add a marker for retpoline to the module VERMAGIC. This catches the case when a non RETPOLINE compiled module gets loaded into a retpoline kernel, making it insecure. It doesn't handle the case when retpoline has been runtime disabled. Even in this case the match of the retcompile status will be enforced. This implies that even with retpoline run time disabled all modules loaded need to be recompiled. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Cc: rusty@rustcorp.com.au Cc: arjan.van.de.ven@intel.com Cc: jeyu@kernel.org Cc: torvalds@linux-foundation.org Link: https://lkml.kernel.org/r/20180116205228.4890-1-andi@firstfloor.org
2018-01-17x86/cpufeature: Move processor tracing out of scattered featuresPaolo Bonzini2-2/+1
Processor tracing is already enumerated in word 9 (CPUID[7,0].EBX), so do not duplicate it in the scattered features word. Besides being more tidy, this will be useful for KVM when it presents processor tracing to the guests. KVM selects host features that are supported by both the host kernel (depending on command line options, CPU errata, or whatever) and KVM. Whenever a full feature word exists, KVM's code is written in the expectation that the CPUID bit number matches the X86_FEATURE_* bit number, but this is not the case for X86_FEATURE_INTEL_PT. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luwei Kang <luwei.kang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Link: http://lkml.kernel.org/r/1516117345-34561-1-git-send-email-pbonzini@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds3-6/+6
Pull rdma fixes from Doug Ledford: "We had a few more items creep up over the last week. Given we are in -rc8, these are obviously limited to bugs that have a big downside and for which we are certain of the fix. The first is a straight up oops bug that all you have to do is read the code to see it's a guaranteed 100% oops bug. The second is a use-after-free issue. We get away lucky if the queue we are shutting down is empty, but if it isn't, we can end up oopsing. We really need to drain the queue before destroying it. The final one is an issue with bad user input causing us to access our port array out of bounds. While fixing the array out of bounds issue, it was noticed that the original code did the same thing twice (the call to rdma_ah_set_port_num()), so its removal is not balanced by a readd elsewhere, it was already where it needed to be in addition to where it didn't need to be. Summary: - Oops fix in hfi1 driver - use-after-free issue in iser-target - use of user supplied array index without proper checking" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/mlx5: Fix out-of-bound access while querying AH IB/hfi1: Prevent a NULL dereference iser-target: Fix possible use-after-free in connection establishment error
2018-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds59-239/+390
Pull networking fixes from David Miller: 1) Two read past end of buffer fixes in AF_KEY, from Eric Biggers. 2) Memory leak in key_notify_policy(), from Steffen Klassert. 3) Fix overflow with bpf arrays, from Daniel Borkmann. 4) Fix RDMA regression with mlx5 due to mlx5 no longer using pci_irq_get_affinity(), from Saeed Mahameed. 5) Missing RCU read locking in nl80211_send_iface() when it calls ieee80211_bss_get_ie(), from Dominik Brodowski. 6) cfg80211 should check dev_set_name()'s return value, from Johannes Berg. 7) Missing module license tag in 9p protocol, from Stephen Hemminger. 8) Fix crash due to too small MTU in udp ipv6 sendmsg, from Mike Maloney. 9) Fix endless loop in netlink extack code, from David Ahern. 10) TLS socket layer sets inverted error codes, resulting in an endless loop. From Robert Hering. 11) Revert openvswitch erspan tunnel support, it's mis-designed and we need to kill it before it goes into a real release. From William Tu. 12) Fix lan78xx failures in full speed USB mode, from Yuiko Oshino. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits) net, sched: fix panic when updating miniq {b,q}stats qed: Fix potential use-after-free in qed_spq_post() nfp: use the correct index for link speed table lan78xx: Fix failure in USB Full Speed sctp: do not allow the v4 socket to bind a v4mapped v6 address sctp: return error if the asoc has been peeled off in sctp_wait_for_sndbuf sctp: reinit stream if stream outcnt has been change by sinit in sendmsg ibmvnic: Fix pending MAC address changes netlink: extack: avoid parenthesized string constant warning ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANY net: Allow neigh contructor functions ability to modify the primary_key sh_eth: fix dumping ARSTR Revert "openvswitch: Add erspan tunnel support." net/tls: Fix inverted error codes to avoid endless loop ipv6: ip6_make_skb() needs to clear cork.base.dst sctp: avoid compiler warning on implicit fallthru net: ipv4: Make "ip route get" match iif lo rules again. netlink: extack needs to be reset each time through loop tipc: fix a memory leak in tipc_nl_node_get_link() ipv6: fix udpv6 sendmsg crash caused by too small MTU ...
2018-01-16Merge tag 'sound-4.15' of ↵Linus Torvalds5-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A few small last-minute fixes that should sneak into 4.15: - remove a spurious WARN_ON() triggered by syzkaller - fix for ioctl races in ALSA sequencer - two trivial HD-audio fixup entries" * tag 'sound-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: seq: Make ioctls race-free ALSA: pcm: Remove yet superfluous WARN_ON() ALSA: hda - Apply the existing quirk to iMac 14,1 ALSA: hda - Apply headphone noise quirk for another Dell XPS 13 variant
2018-01-16Merge tag 'trace-v4.15-rc4-2' of ↵Linus Torvalds2-18/+46
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Bring back context level recursive protection in ring buffer. The simpler counter protection failed, due to a path when tracing with trace_clock_global() as it could not be reentrant and depended on the ring buffer recursive protection to keep that from happening. - Prevent branch profiling when FORTIFY_SOURCE is enabled. It causes 50 - 60 MB in warning messages. Branch profiling should never be run on production systems, so there's no reason that it needs to be enabled with FORTIFY_SOURCE. * tag 'trace-v4.15-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Prevent PROFILE_ALL_BRANCHES when FORTIFY_SOURCE=y ring-buffer: Bring back context level recursive checks
2018-01-16net, sched: fix panic when updating miniq {b,q}statsDaniel Borkmann4-30/+24
While working on fixing another bug, I ran into the following panic on arm64 by simply attaching clsact qdisc, adding a filter and running traffic on ingress to it: [...] [ 178.188591] Unable to handle kernel read from unreadable memory at virtual address 810fb501f000 [ 178.197314] Mem abort info: [ 178.200121] ESR = 0x96000004 [ 178.203168] Exception class = DABT (current EL), IL = 32 bits [ 178.209095] SET = 0, FnV = 0 [ 178.212157] EA = 0, S1PTW = 0 [ 178.215288] Data abort info: [ 178.218175] ISV = 0, ISS = 0x00000004 [ 178.222019] CM = 0, WnR = 0 [ 178.224997] user pgtable: 4k pages, 48-bit VAs, pgd = 0000000023cb3f33 [ 178.231531] [0000810fb501f000] *pgd=0000000000000000 [ 178.236508] Internal error: Oops: 96000004 [#1] SMP [...] [ 178.311855] CPU: 73 PID: 2497 Comm: ping Tainted: G W 4.15.0-rc7+ #5 [ 178.319413] Hardware name: FOXCONN R2-1221R-A4/C2U4N_MB, BIOS G31FB18A 03/31/2017 [ 178.326887] pstate: 60400005 (nZCv daif +PAN -UAO) [ 178.331685] pc : __netif_receive_skb_core+0x49c/0xac8 [ 178.336728] lr : __netif_receive_skb+0x28/0x78 [ 178.341161] sp : ffff00002344b750 [ 178.344465] x29: ffff00002344b750 x28: ffff810fbdfd0580 [ 178.349769] x27: 0000000000000000 x26: ffff000009378000 [...] [ 178.418715] x1 : 0000000000000054 x0 : 0000000000000000 [ 178.424020] Process ping (pid: 2497, stack limit = 0x000000009f0a3ff4) [ 178.430537] Call trace: [ 178.432976] __netif_receive_skb_core+0x49c/0xac8 [ 178.437670] __netif_receive_skb+0x28/0x78 [ 178.441757] process_backlog+0x9c/0x160 [ 178.445584] net_rx_action+0x2f8/0x3f0 [...] Reason is that sch_ingress and sch_clsact are doing mini_qdisc_pair_init() which sets up miniq pointers to cpu_{b,q}stats from the underlying qdisc. Problem is that this cannot work since they are actually set up right after the qdisc ->init() callback in qdisc_create(), so first packet going into sch_handle_ingress() tries to call mini_qdisc_bstats_cpu_update() and we therefore panic. In order to fix this, allocation of {b,q}stats needs to happen before we call into ->init(). In net-next, there's already such option through commit d59f5ffa59d8 ("net: sched: a dflt qdisc may be used with per cpu stats"). However, the bug needs to be fixed in net still for 4.15. Thus, include these bits to reduce any merge churn and reuse the static_flags field to set TCQ_F_CPUSTATS, and remove the allocation from qdisc_create() since there is no other user left. Prashant Bhole ran into the same issue but for net-next, thus adding him below as well as co-author. Same issue was also reported by Sandipan Das when using bcc. Fixes: 46209401f8f6 ("net: core: introduce mini_Qdisc and eliminate usage of tp->q for clsact fastpath") Reference: https://lists.iovisor.org/pipermail/iovisor-dev/2018-January/001190.html Reported-by: Sandipan Das <sandipan@linux.vnet.ibm.com> Co-authored-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Co-authored-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16qed: Fix potential use-after-free in qed_spq_post()Roland Dreier1-1/+7
We need to check if p_ent->comp_mode is QED_SPQ_MODE_EBLOCK before calling qed_spq_add_entry(). The test is fine is the mode is EBLOCK, but if it isn't then qed_spq_add_entry() might kfree(p_ent). Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16nfp: use the correct index for link speed tableJakub Kicinski1-1/+1
sts variable is holding link speed as well as state. We should be using ls to index into ls_to_ethtool. Fixes: 265aeb511bd5 ("nfp: add support for .get_link_ksettings()") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16lan78xx: Fix failure in USB Full SpeedYuiko Oshino1-0/+1
Fix initialize the uninitialized tx_qlen to an appropriate value when USB Full Speed is used. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16Merge tag 'mac80211-for-davem-2018-01-15' of ↵David S. Miller6-11/+32
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== More fixes: * hwsim: - properly flush deletion works at module unload - validate # of channels passed from userspace * cfg80211: - fix RCU locking regression - initialize on-stack channel data for nl80211 event - check dev_set_name() return value ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16sctp: do not allow the v4 socket to bind a v4mapped v6 addressXin Long1-8/+6
The check in sctp_sockaddr_af is not robust enough to forbid binding a v4mapped v6 addr on a v4 socket. The worse thing is that v4 socket's bind_verify would not convert this v4mapped v6 addr to a v4 addr. syzbot even reported a crash as the v4 socket bound a v6 addr. This patch is to fix it by doing the common sa.sa_family check first, then AF_INET check for v4mapped v6 addrs. Fixes: 7dab83de50c7 ("sctp: Support ipv6only AF_INET6 sockets.") Reported-by: syzbot+7b7b518b1228d2743963@syzkaller.appspotmail.com Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16sctp: return error if the asoc has been peeled off in sctp_wait_for_sndbufXin Long1-10/+6
After commit cea0cc80a677 ("sctp: use the right sk after waking up from wait_buf sleep"), it may change to lock another sk if the asoc has been peeled off in sctp_wait_for_sndbuf. However, the asoc's new sk could be already closed elsewhere, as it's in the sendmsg context of the old sk that can't avoid the new sk's closing. If the sk's last one refcnt is held by this asoc, later on after putting this asoc, the new sk will be freed, while under it's own lock. This patch is to revert that commit, but fix the old issue by returning error under the old sk's lock. Fixes: cea0cc80a677 ("sctp: use the right sk after waking up from wait_buf sleep") Reported-by: syzbot+ac6ea7baa4432811eb50@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16sctp: reinit stream if stream outcnt has been change by sinit in sendmsgXin Long1-2/+8
After introducing sctp_stream structure, sctp uses stream->outcnt as the out stream nums instead of c.sinit_num_ostreams. However when users use sinit in cmsg, it only updates c.sinit_num_ostreams in sctp_sendmsg. At that moment, stream->outcnt is still using previous value. If it's value is not updated, the sinit_num_ostreams of sinit could not really work. This patch is to fix it by updating stream->outcnt and reiniting stream if stream outcnt has been change by sinit in sendmsg. Fixes: a83863174a61 ("sctp: prepare asoc stream for stream reconf") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16ibmvnic: Fix pending MAC address changesThomas Falcon1-6/+7
Due to architecture limitations, the IBM VNIC client driver is unable to perform MAC address changes unless the device has "logged in" to its backing device. Currently, pending MAC changes are handled before login, resulting in an error and failure to change the MAC address. Moving that chunk to the end of the ibmvnic_login function, when we are sure that it was successful, fixes that. The MAC address can be changed when the device is up or down, so only check if the device is in a "PROBED" state before setting the MAC address. Fixes: c26eba03e407 ("ibmvnic: Update reset infrastructure to support tunable parameters") Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Reviewed-by: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16delayacct: Account blkio completion on the correct taskJosh Snyder3-23/+33
Before commit: e33a9bba85a8 ("sched/core: move IO scheduling accounting from io_schedule_timeout() into scheduler") delayacct_blkio_end() was called after context-switching into the task which completed I/O. This resulted in double counting: the task would account a delay both waiting for I/O and for time spent in the runqueue. With e33a9bba85a8, delayacct_blkio_end() is called by try_to_wake_up(). In ttwu, we have not yet context-switched. This is more correct, in that the delay accounting ends when the I/O is complete. But delayacct_blkio_end() relies on 'get_current()', and we have not yet context-switched into the task whose I/O completed. This results in the wrong task having its delay accounting statistics updated. Instead of doing that, pass the task_struct being woken to delayacct_blkio_end(), so that it can update the statistics of the correct task. Signed-off-by: Josh Snyder <joshs@netflix.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Balbir Singh <bsingharora@gmail.com> Cc: <stable@vger.kernel.org> Cc: Brendan Gregg <bgregg@netflix.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-block@vger.kernel.org Fixes: e33a9bba85a8 ("sched/core: move IO scheduling accounting from io_schedule_timeout() into scheduler") Link: http://lkml.kernel.org/r/1513613712-571-1-git-send-email-joshs@netflix.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-16x86/mm: Encrypt the initrd earlier for BSP microcode updateTom Lendacky5-45/+85
Currently the BSP microcode update code examines the initrd very early in the boot process. If SME is active, the initrd is treated as being encrypted but it has not been encrypted (in place) yet. Update the early boot code that encrypts the kernel to also encrypt the initrd so that early BSP microcode updates work. Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180110192634.6026.10452.stgit@tlendack-t1.amdoffice.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-16x86/mm: Prepare sme_encrypt_kernel() for PAGE aligned encryptionTom Lendacky2-22/+121
In preparation for encrypting more than just the kernel, the encryption support in sme_encrypt_kernel() needs to support 4KB page aligned encryption instead of just 2MB large page aligned encryption. Update the routines that populate the PGD to support non-2MB aligned addresses. This is done by creating PTE page tables for the start and end portion of the address range that fall outside of the 2MB alignment. This results in, at most, two extra pages to hold the PTE entries for each mapping of a range. Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180110192626.6026.75387.stgit@tlendack-t1.amdoffice.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-16x86/mm: Centralize PMD flags in sme_encrypt_kernel()Tom Lendacky1-56/+77
In preparation for encrypting more than just the kernel during early boot processing, centralize the use of the PMD flag settings based on the type of mapping desired. When 4KB aligned encryption is added, this will allow either PTE flags or large page PMD flags to be used without requiring the caller to adjust. Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180110192615.6026.14767.stgit@tlendack-t1.amdoffice.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-16x86/mm: Use a struct to reduce parameters for SME PGD mappingTom Lendacky1-44/+46
In preparation for follow-on patches, combine the PGD mapping parameters into a struct to reduce the number of function arguments and allow for direct updating of the next pagetable mapping area pointer. Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180110192605.6026.96206.stgit@tlendack-t1.amdoffice.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-16x86/mm: Clean up register saving in the __enc_copy() assembly codeTom Lendacky1-10/+10
Clean up the use of PUSH and POP and when registers are saved in the __enc_copy() assembly function in order to improve the readability of the code. Move parameter register saving into general purpose registers earlier in the code and move all the pushes to the beginning of the function with corresponding pops at the end. We do this to prepare fixes. Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180110192556.6026.74187.stgit@tlendack-t1.amdoffice.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-16objtool: Improve error message for bad file argumentJosh Poimboeuf1-1/+3
If a nonexistent file is supplied to objtool, it complains with a non-helpful error: open: No such file or directory Improve it to: objtool: Can't open 'foo': No such file or directory Reported-by: Markus <M4rkusXXL@web.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/406a3d00a21225eee2819844048e17f68523ccf6.1516025651.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-16objtool: Fix seg fault with gold linkerJosh Poimboeuf1-4/+10
Objtool segfaults when the gold linker is used with CONFIG_MODVERSIONS=y and CONFIG_UNWINDER_ORC=y. With CONFIG_MODVERSIONS=y, the .o file gets passed to the linker before being passed to objtool. The gold linker seems to strip unused ELF symbols by default, which confuses objtool and causes the seg fault when it's trying to generate ORC metadata. Objtool should really be running immediately after GCC anyway, without a linker call in between. Change the makefile ordering so that objtool is called before the linker. Reported-and-tested-by: Markus <M4rkusXXL@web.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: ee9f8fce9964 ("x86/unwind: Add the ORC unwinder") Link: http://lkml.kernel.org/r/355f04da33581f4a3bf82e5b512973624a1e23a2.1516025651.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-15RDMA/mlx5: Fix out-of-bound access while querying AHLeon Romanovsky1-4/+3
The rdma_ah_find_type() accesses the port array based on an index controlled by userspace. The existing bounds check is after the first use of the index, so userspace can generate an out of bounds access, as shown by the KASN report below. ================================================================== BUG: KASAN: slab-out-of-bounds in to_rdma_ah_attr+0xa8/0x3b0 Read of size 4 at addr ffff880019ae2268 by task ibv_rc_pingpong/409 CPU: 0 PID: 409 Comm: ibv_rc_pingpong Not tainted 4.15.0-rc2-00031-gb60a3faf5b83-dirty #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xe9/0x18f print_address_description+0xa2/0x350 kasan_report+0x3a5/0x400 to_rdma_ah_attr+0xa8/0x3b0 mlx5_ib_query_qp+0xd35/0x1330 ib_query_qp+0x8a/0xb0 ib_uverbs_query_qp+0x237/0x7f0 ib_uverbs_write+0x617/0xd80 __vfs_write+0xf7/0x500 vfs_write+0x149/0x310 SyS_write+0xca/0x190 entry_SYSCALL_64_fastpath+0x18/0x85 RIP: 0033:0x7fe9c7a275a0 RSP: 002b:00007ffee5498738 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fe9c7ce4b00 RCX: 00007fe9c7a275a0 RDX: 0000000000000018 RSI: 00007ffee5498800 RDI: 0000000000000003 RBP: 000055d0c8d3f010 R08: 00007ffee5498800 R09: 0000000000000018 R10: 00000000000000ba R11: 0000000000000246 R12: 0000000000008000 R13: 0000000000004fb0 R14: 000055d0c8d3f050 R15: 00007ffee5498560 Allocated by task 1: __kmalloc+0x3f9/0x430 alloc_mad_private+0x25/0x50 ib_mad_post_receive_mads+0x204/0xa60 ib_mad_init_device+0xa59/0x1020 ib_register_device+0x83a/0xbc0 mlx5_ib_add+0x50e/0x5c0 mlx5_add_device+0x142/0x410 mlx5_register_interface+0x18f/0x210 mlx5_ib_init+0x56/0x63 do_one_initcall+0x15b/0x270 kernel_init_freeable+0x2d8/0x3d0 kernel_init+0x14/0x190 ret_from_fork+0x24/0x30 Freed by task 0: (stack is not available) The buggy address belongs to the object at ffff880019ae2000 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 104 bytes to the right of 512-byte region [ffff880019ae2000, ffff880019ae2200) The buggy address belongs to the page: page:000000005d674e18 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x4000000000008100(slab|head) raw: 4000000000008100 0000000000000000 0000000000000000 00000001000c000c raw: dead000000000100 dead000000000200 ffff88001a402000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880019ae2100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880019ae2180: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc >ffff880019ae2200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff880019ae2280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880019ae2300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Disabling lock debugging due to kernel taint Cc: <stable@vger.kernel.org> Fixes: 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-15netlink: extack: avoid parenthesized string constant warningJohannes Berg1-2/+2
NL_SET_ERR_MSG() and NL_SET_ERR_MSG_ATTR() lead to the following warning in newer versions of gcc: warning: array initialized from parenthesized string constant Just remove the parentheses, they're not needed in this context since anyway since there can be no operator precendence issues or similar. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15Merge branch ↵David S. Miller3-3/+11
'ipv4-Make-neigh-lookup-keys-for-loopback-point-to-point-devices-be-INADDR_ANY' Jim Westfall says: ==================== ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANY This used to be the previous behavior in older kernels but became broken in a263b3093641f (ipv4: Make neigh lookups directly in output packet path) and then later removed because it was broken in 0bb4087cbec0 (ipv4: Fix neigh lookup keying over loopback/point-to-point devices) Not having this results in there being an arp entry for every remote ip address that the device talks to. Given a fairly active device it can cause the arp table to become huge and/or having to add/purge large number of entires to keep within table size thresholds. $ ip -4 neigh show nud noarp | grep tun | wc -l 55850 $ lnstat -k arp_cache:entries,arp_cache:allocs,arp_cache:destroys -c 10 arp_cach|arp_cach|arp_cach| entries| allocs|destroys| 81493|620166816|620126069| 101867| 10186| 0| 113854| 5993| 0| 118773| 2459| 0| 27937| 18579| 63998| 39256| 5659| 0| 56231| 8487| 0| 65602| 4685| 0| 79697| 7047| 0| 90733| 5517| 0| v2: - fixes coding style issues ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANYJim Westfall2-1/+9
Map all lookup neigh keys to INADDR_ANY for loopback/point-to-point devices to avoid making an entry for every remote ip the device needs to talk to. This used the be the old behavior but became broken in a263b3093641f (ipv4: Make neigh lookups directly in output packet path) and later removed in 0bb4087cbec0 (ipv4: Fix neigh lookup keying over loopback/point-to-point devices) because it was broken. Signed-off-by: Jim Westfall <jwestfall@surrealistic.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15net: Allow neigh contructor functions ability to modify the primary_keyJim Westfall1-2/+2
Use n->primary_key instead of pkey to account for the possibility that a neigh constructor function may have modified the primary_key value. Signed-off-by: Jim Westfall <jwestfall@surrealistic.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15sh_eth: fix dumping ARSTRSergei Shtylyov1-1/+1
ARSTR is always located at the start of the TSU register region, thus using add_reg() instead of add_tsu_reg() in __sh_eth_get_regs() to dump it causes EDMR or EDSR (depending on the register layout) to be dumped instead of ARSTR. Use the correct condition/macro there... Fixes: 6b4b4fead342 ("sh_eth: Implement ethtool register dump operations") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15Revert "openvswitch: Add erspan tunnel support."William Tu2-51/+1
This reverts commit ceaa001a170e43608854d5290a48064f57b565ed. The OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS attr should be designed as a nested attribute to support all ERSPAN v1 and v2's fields. The current attr is a be32 supporting only one field. Thus, this patch reverts it and later patch will redo it using nested attr. Signed-off-by: William Tu <u9012063@gmail.com> Cc: Jiri Benc <jbenc@redhat.com> Cc: Pravin Shelar <pshelar@ovn.org> Acked-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15net/tls: Fix inverted error codes to avoid endless loopr.hering@avm.de2-3/+3
sendfile() calls can hang endless with using Kernel TLS if a socket error occurs. Socket error codes must be inverted by Kernel TLS before returning because they are stored with positive sign. If returned non-inverted they are interpreted as number of bytes sent, causing endless looping of the splice mechanic behind sendfile(). Signed-off-by: Robert Hering <r.hering@avm.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15ipv6: ip6_make_skb() needs to clear cork.base.dstEric Dumazet1-0/+1
In my last patch, I missed fact that cork.base.dst was not initialized in ip6_make_skb() : If ip6_setup_cork() returns an error, we might attempt a dst_release() on some random pointer. Fixes: 862c03ee1deb ("ipv6: fix possible mem leaks in ipv6_make_skb()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15tracing: Prevent PROFILE_ALL_BRANCHES when FORTIFY_SOURCE=yRandy Dunlap1-1/+1
I regularly get 50 MB - 60 MB files during kernel randconfig builds. These large files mostly contain (many repeats of; e.g., 124,594): In file included from ../include/linux/string.h:6:0, from ../include/linux/uuid.h:20, from ../include/linux/mod_devicetable.h:13, from ../scripts/mod/devicetable-offsets.c:3: ../include/linux/compiler.h:64:4: warning: '______f' is static but declared in inline function 'strcpy' which is not static [enabled by default] ______f = { \ ^ ../include/linux/compiler.h:56:23: note: in expansion of macro '__trace_if' ^ ../include/linux/string.h:425:2: note: in expansion of macro 'if' if (p_size == (size_t)-1 && q_size == (size_t)-1) ^ This only happens when CONFIG_FORTIFY_SOURCE=y and CONFIG_PROFILE_ALL_BRANCHES=y, so prevent PROFILE_ALL_BRANCHES if FORTIFY_SOURCE=y. Link: http://lkml.kernel.org/r/9199446b-a141-c0c3-9678-a3f9107f2750@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-01-15sctp: avoid compiler warning on implicit fallthruMarcelo Ricardo Leitner2-2/+3
These fall-through are expected. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15net: ipv4: Make "ip route get" match iif lo rules again.Lorenzo Colitti1-0/+1
Commit 3765d35ed8b9 ("net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup") broke "ip route get" in the presence of rules that specify iif lo. Host-originated traffic always has iif lo, because ip_route_output_key_hash and ip6_route_output_flags set the flow iif to LOOPBACK_IFINDEX. Thus, putting "iif lo" in an ip rule is a convenient way to select only originated traffic and not forwarded traffic. inet_rtm_getroute used to match these rules correctly because even though it sets the flow iif to 0, it called ip_route_output_key which overwrites iif with LOOPBACK_IFINDEX. But now that it calls ip_route_output_key_hash_rcu, the ifindex will remain 0 and not match the iif lo in the rule. As a result, "ip route get" will return ENETUNREACH. Fixes: 3765d35ed8b9 ("net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup") Tested: https://android.googlesource.com/kernel/tests/+/master/net/test/multinetwork_test.py passes again Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15netlink: extack needs to be reset each time through loopDavid Ahern1-1/+2
syzbot triggered the WARN_ON in netlink_ack testing the bad_attr value. The problem is that netlink_rcv_skb loops over the skb repeatedly invoking the callback and without resetting the extack leaving potentially stale data. Initializing each time through avoids the WARN_ON. Fixes: 2d4bc93368f5a ("netlink: extended ACK reporting") Reported-by: syzbot+315fa6766d0f7c359327@syzkaller.appspotmail.com Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 03:37:32 +0000