summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-06-01stmmac: make platform drivers depend on their associated SoCPeter Robinson1-7/+7
There's not much point, except compile test, enabling the stmmac platform drivers unless their actual SoC is enabled. They're not useful without it. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-01Merge branch 'macvlan-less-mcast-cloning'David S. Miller1-7/+41
Herbert Xu says: ==================== macvlan: Avoid unnecessary multicast cloning This patch tries to improve macvlan multicast performance by maintaining a filter hash at the macvlan_port level so that we can quickly determine whether a given packet is needed or not. It is preceded by a patch that fixes a potential use-after-free bug that I discovered while looking over this. v2 fixed a bug where promiscuous/allmulti settings weren't handled correctly. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-01macvlan: Avoid unnecessary multicast cloningHerbert Xu1-6/+34
Currently we always queue a multicast packet for further processing, even if none of the macvlan devices are subscribed to the address. This patch optimises this by adding a global multicast filter for a macvlan_port. Note that this patch doesn't handle the broadcast addresses of the individual macvlan devices correctly, if they are not all identical to vlan->lowerdev. However, this is already broken because there is no mechanism in place to update the individual multicast filters when you change the broadcast address. If someone cares enough they should fix this by collecting all broadcast addresses for a macvlan as we do for multicast and unicast. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-01macvlan: Fix potential use-after free for broadcastsHerbert Xu1-2/+8
When we postpone a broadcast packet we save the source port in the skb if it is local. However, the source port can disappear before we get a chance to process the packet. This patch fixes this by holding a ref count on the netdev. It also delays the skb->cb modification until after we allocate the new skb as you should not modify shared skbs. Fixes: 412ca1550cbe ("macvlan: Move broadcasts into a work queue") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-01udp: avoid csum_partial() for validated skbEric Dumazet1-2/+2
In commit e6afc8ace6dd5 ("udp: remove headers from UDP packets before queueing"), udp_csum_pull_header() helper was added but missed fact that CHECKSUM_UNNECESSARY packets were now converted to CHECKSUM_NONE and skb->csum_valid was set to 1 for them. Since csum_partial() is quite expensive, even for 8-byte area, it is worth adding a test. We also can use skb->data instead of udp_hdr() as we are pulling UDP headers, as it is sightly faster. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-01ravb: Add SET_RUNTIME_PM_OPS macroKazuya Mizuguchi1-2/+1
Use SET_RUNTIME_PM_OPS macro instead of assigning a member of dev_pm_ops directly. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-01ravb: Add ESF in RCR for enabling separation filterMasaru Nagai1-1/+2
The H/W manual recommends B'10 or B'11 in a value of the separation filtering select bits in the receive configuration register (RCR.ESF). When B'10 is set, frames from non-matching streams are discarded. When B'11 is set, frames from non-matching streams are processed in reception queue 0 (best effort). This patch sets B'11 in ESF. [ykaneko0929@gmail.com: revised this commit message] Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com> Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds67-262/+580
Pull networking fixes from David Miller: 1) Fix negative error code usage in ATM layer, from Stefan Hajnoczi. 2) If CONFIG_SYSCTL is disabled, the default TTL is not initialized properly. From Ezequiel Garcia. 3) Missing spinlock init in mvneta driver, from Gregory CLEMENT. 4) Missing unlocks in hwmb error paths, also from Gregory CLEMENT. 5) Fix deadlock on team->lock when propagating features, from Ivan Vecera. 6) Work around buffer offset hw bug in alx chips, from Feng Tang. 7) Fix double listing of SCTP entries in sctp_diag dumps, from Xin Long. 8) Various statistics bug fixes in mlx4 from Eric Dumazet. 9) Fix some randconfig build errors wrt fou ipv6 from Arnd Bergmann. 10) All of l2tp was namespace aware, but the ipv6 support code was not doing so. From Shmulik Ladkani. 11) Handle on-stack hrtimers properly in pktgen, from Guenter Roeck. 12) Propagate MAC changes properly through VLAN devices, from Mike Manning. 13) Fix memory leak in bnx2x_init_one(), from Vitaly Kuznetsov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits) sfc: Track RPS flow IDs per channel instead of per function usbnet: smsc95xx: fix link detection for disabled autonegotiation virtio_net: fix virtnet_open and virtnet_probe competing for try_fill_recv bnx2x: avoid leaking memory on bnx2x_init_one() failures fou: fix IPv6 Kconfig options openvswitch: update checksum in {push,pop}_mpls sctp: sctp_diag should dump sctp socket type net: fec: update dirty_tx even if no skb vlan: Propagate MAC address to VLANs atm: iphase: off by one in rx_pkt() atm: firestream: add more reserved strings vxlan: Accept user specified MTU value when create new vxlan link net: pktgen: Call destroy_hrtimer_on_stack() timer: Export destroy_hrtimer_on_stack() net: l2tp: Make l2tp_ip6 namespace aware Documentation: ip-sysctl.txt: clarify secure_redirects sfc: use flow dissector helpers for aRFS ieee802154: fix logic error in ieee802154_llsec_parse_dev_addr net: nps_enet: Disable interrupts before napi reschedule net/lapb: tuse %*ph to dump buffers ...
2016-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds11-100/+215
Pull sparc fixes from David Miller: "sparc64 mmu context allocation and trap return bug fixes" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix return from trap window fill crashes. sparc: Harden signal return frame checks. sparc64: Take ctx_alloc_lock properly in hugetlb_setup().
2016-05-31sfc: Track RPS flow IDs per channel instead of per functionJon Cooper3-17/+56
Otherwise we get confused when two flows on different channels get the same flow ID. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31usbnet: smsc95xx: fix link detection for disabled autonegotiationChristoph Fritz1-0/+51
To detect link status up/down for connections where autonegotiation is explicitly disabled, we don't get an irq but need to poll the status register for link up/down detection. This patch adds a workqueue to poll for link status. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31virtio_net: fix virtnet_open and virtnet_probe competing for try_fill_recvwangyunjian1-16/+2
In function virtnet_open() and virtnet_probe(), func try_fill_recv() may be executed at the same time. VQ in virtqueue_add() has not been protected well and BUG_ON will be triggered when virito_net.ko being removed. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31bnx2x: avoid leaking memory on bnx2x_init_one() failuresVitaly Kuznetsov1-7/+10
bnx2x_init_bp() allocates memory with bnx2x_alloc_mem_bp() so if we fail later in bnx2x_init_one() we need to free this memory with bnx2x_free_mem_bp() to avoid leakages. E.g. I'm observing memory leaks reported by kmemleak when a failure (unrelated) happens in bnx2x_vfpf_acquire(). Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31fou: fix IPv6 Kconfig optionsArnd Bergmann2-2/+2
The Kconfig options I added to work around broken compilation ended up screwing up things more, as I used the wrong symbol to control compilation of the file, resulting in IPv6 fou support to never be built into the kernel. Changing CONFIG_NET_FOU_IPV6_TUNNELS to CONFIG_IPV6_FOU fixes that problem, I had renamed the symbol in one location but not the other, and as the file is never being used by other kernel code, this did not lead to a build failure that I would have caught. After that fix, another issue with the same patch becomes obvious, as we 'select INET6_TUNNEL', which is related to IPV6_TUNNEL, but not the same, and this can still cause the original build failure when IPV6_TUNNEL is not built-in but IPV6_FOU is. The fix is equally trivial, we just need to select the right symbol. I have successfully build 350 randconfig kernels with this patch and verified that the driver is now being built. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Valentin Rothberg <valentinrothberg@gmail.com> Fixes: fabb13db448e ("fou: add Kconfig options for IPv6 support") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31openvswitch: update checksum in {push,pop}_mplsSimon Horman1-5/+15
In the case of CHECKSUM_COMPLETE the skb checksum should be updated in {push,pop}_mpls() as they the type in the ethernet header. As suggested by Pravin Shelar. Cc: Pravin Shelar <pshelar@nicira.com> Fixes: 25cd9ba0abc0 ("openvswitch: Add basic MPLS support to kernel") Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31sctp: sctp_diag should dump sctp socket typeXin Long2-0/+3
Now we cannot distinguish that one sk is a udp or sctp style when we use ss to dump sctp_info. it's necessary to dump it as well. For sctp_diag, ss support is not officially available, thus there are no official users of this yet, so we can add this field in the middle of sctp_info without breaking user API. v1->v2: - move 'sctpi_s_type' field to the end of struct sctp_info, so that it won't cause incompatibility with applications already built. - add __reserved3 in sctp_info to make sure sctp_info is 8-byte alignment. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31net: fec: update dirty_tx even if no skbTroy Kisky1-5/+3
If dirty_tx isn't updated, then dma_unmap_single can be called twice. This fixes a [ 58.420980] ------------[ cut here ]------------ [ 58.425667] WARNING: CPU: 0 PID: 377 at /home/schurig/d/mkarm/linux-4.5/lib/dma-debug.c:1096 check_unmap+0x9d0/0xab8() [ 58.436405] fec 2188000.ethernet: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=66 bytes] encountered by Holger Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Tested-by: <holgerschurig@gmail.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31vlan: Propagate MAC address to VLANsMike Manning3-3/+24
The MAC address of the physical interface is only copied to the VLAN when it is first created, resulting in an inconsistency after MAC address changes of only newly created VLANs having an up-to-date MAC. The VLANs should continue inheriting the MAC address of the physical interface until the VLAN MAC address is explicitly set to any value. This allows IPv6 EUI64 addresses for the VLAN to reflect any changes to the MAC of the physical interface and thus for DAD to behave as expected. Signed-off-by: Mike Manning <mmanning@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31atm: iphase: off by one in rx_pkt()Dan Carpenter1-1/+1
The iadev->rx_open[] array holds "iadev->num_vc" pointers (this code assumes that pointers are 32 bits). So the > here should be >= or else we could end up reading a garbage pointer from one element beyond the end of the array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31atm: firestream: add more reserved stringsDan Carpenter1-1/+5
This bug was there when the driver was first added in back in year 2000. It causes a Smatch warning: drivers/atm/firestream.c:849 process_incoming() error: buffer overflow 'res_strings' 60 <= 63 There are supposed to be 64 entries in this array and the missing strings are clearly in the 30 40 range. I added them as reserved 37 to reserved 40. It's possible that strings are really supposed to be added in the middle instead of at the end, but this approach is safe, in that it fixes the bug and doesn't break anything that wasn't already broken. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31vxlan: Accept user specified MTU value when create new vxlan linkChen Haiquan1-0/+3
When create a new vxlan link, example: ip link add vtap mtu 1440 type vxlan vni 1 dev eth0 The argument "mtu" has no effect, because it is not set to conf->mtu. The default value is used in vxlan_dev_configure function. This problem was introduced by commit 0dfbdf4102b9 (vxlan: Factor out device configuration). Fixes: 0dfbdf4102b9 (vxlan: Factor out device configuration) Signed-off-by: Chen Haiquan <oc@yunify.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31net: pktgen: Call destroy_hrtimer_on_stack()Guenter Roeck1-4/+4
If CONFIG_DEBUG_OBJECTS_TIMERS=y, hrtimer_init_on_stack() requires a matching call to destroy_hrtimer_on_stack() to clean up timer debug objects. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31timer: Export destroy_hrtimer_on_stack()Guenter Roeck1-0/+1
hrtimer_init_on_stack() needs a matching call to destroy_hrtimer_on_stack(), so both need to be exported. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31Merge branch 'for-linus' of ↵Linus Torvalds8-68/+103
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Three bugs fixes and an update for the default configuration" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix info leak in do_sigsegv s390/config: update default configuration s390/bpf: fix recache skb->data/hlen for skb_vlan_push/pop s390/bpf: reduce maximum program size to 64 KB
2016-05-31Merge tag 'gpio-v4.7-2' of ↵Linus Torvalds2-58/+41
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "A bunch of GPIO fixes for the v4.7 series: - Drop the lock before reading out the GPIO direction setting in drivers supporting the .get_direction() callback: some of them may be slowpath. - Flush GPIO direction setting before locking a GPIO as an IRQ: some electronics or other poking around in the registers behind our back may have happened, so flush the direction status before trying to lock the line for use by IRQs. - Bail out silently when asked to perform operations on NULL GPIO descriptors. That is what all the get_*_optional() is about: we get optional GPIO handles, if they are not there, we get NULL. - Handle compatible ioctl() correctly: we need to convert the ioctl() pointer using compat_ptr() here like everyone else. - Disable the broken .to_irq() on the LPC32xx platform. The whole irqchip infrastructure was replaced in the last merge window, and a new implementation will be needed" * tag 'gpio-v4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: drop lock before reading GPIO direction gpio: bail out silently on NULL descriptors gpio: handle compatible ioctl() pointers gpio: flush direction status in gpiochip_lock_as_irq() gpio: lpc32xx: disable broken to_irq support
2016-05-30Merge branch 'uuid' (lib/uuid fixes from Andy)Linus Torvalds4-2/+139
Merge lib/uuid fixes from Andy Shevchenko. * emailed patches from Andy Shevchenko <andriy.shevchenko@linux.intel.com>: lib/uuid.c: use correct offset in uuid parser lib/uuid: add a test module
2016-05-30lib/uuid.c: use correct offset in uuid parserBjørn Mork1-2/+2
Use '+ 0' and '+ 1' as offsets, like they were intended, instead of adding to the result. Fixes: 2b1b0d66704a ("lib/uuid.c: introduce a few more generic helpers") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-30lib/uuid: add a test moduleAndy Shevchenko3-0/+137
It appears that somehow I missed a test of the latest UUID rework which landed in the kernel. Present a small test module to avoid such cases in the future. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-30Merge branch 'linus' of ↵Linus Torvalds3-6/+14
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes the following issues: - missing selection in public_key that may result in a build failure - Potential crash in error path in omap-sham - ccp AES XTS bug that affects requests larger than 4096" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ccp - Fix AES XTS error for request sizes above 4096 crypto: public_key: select CRYPTO_AKCIPHER crypto: omap-sham - potential Oops on error in probe
2016-05-30gpio: drop lock before reading GPIO directionLinus Walleij1-2/+2
When adding the gpiochip, the GPIO HW drivers' callback get_direction() could get called in atomic context. Some of the GPIO HW drivers may sleep when accessing the register. Move the lock before initializing the descriptors. Reported-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-30gpio: bail out silently on NULL descriptorsLinus Walleij1-3/+8
In fdeb8e1547cb9dd39d5d7223b33f3565cf86c28e ("gpio: reflect base and ngpio into gpio_device") assumed that GPIO descriptors are either valid or error pointers, but gpiod_get_[index_]optional() actually return NULL descriptors and then all subsequent calls should just bail out. Cc: stable@vger.kernel.org Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Fixes: fdeb8e1547cb ("gpio: reflect base and ngpio into gpio_device") Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-30gpio: handle compatible ioctl() pointersLinus Walleij1-2/+13
If we're using the compatible ioctl() we need to handle the argument pointer in a special way or there will be trouble. Fixes: 3c702e9987e2 ("gpio: add a userspace chardev ABI for GPIOs") Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-30gpio: flush direction status in gpiochip_lock_as_irq()Linus Walleij1-4/+17
As irqchip and gpiochip functions are orthogonal, the IRQ set-up or something else can have changed the direction of the GPIO line from what the GPIO descriptor knows when we get into gpiochip_lock_as_irq(). Make sure to re-read the direction setting if we have the .get_direction() callback enabled for the chip. Else we get problems like this: iio iio:device2: interrupts on the rising edge gpio gpiochip2: (8012e080.gpio): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ gpio gpiochip2: (8012e080.gpio): unable to lock HW IRQ 0 for IRQ genirq: Failed to request resources for l3g4200d-trigger (irq 111) on irqchip nmk1-32-63 iio iio:device2: failed to request trigger IRQ. st-gyro-i2c: probe of 2-0068 failed with error -22 Fixes: 72d320006177 ("gpio: set up initial state from .get_direction()") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-30gpio: lpc32xx: disable broken to_irq supportSylvain Lemieux1-47/+1
The "to_irq" functionality is broken inside this driver since commit 76ba59f8366f ("genirq: Add irq_domain-aware core IRQ handler"). The addition of the new lpc32xx irqchip driver in 4.7, fixed the lpc32xx platform interrupt issue. When switching to the new lpc32xx irqchip driver, a warning appear in the lpc32xx gpio driver: warning: "NR_IRQS" redefined. To remove this warning (temporary solution), this patch disables the broken "to_irq" mapping functionality support. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-30net: l2tp: Make l2tp_ip6 namespace awareShmulik Ladkani1-5/+7
l2tp_ip6 tunnel and session lookups were still using init_net, although the l2tp core infrastructure already supports lookups keyed by 'net'. As a result, l2tp_ip6_recv discarded packets for tunnels/sessions created in namespaces other than the init_net. Fix, by using dev_net(skb->dev) or sock_net(sk) where appropriate. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-29Documentation: ip-sysctl.txt: clarify secure_redirectsEric Garver1-3/+5
Clarify how secure_redirects works. Mention that RFC1122 always applies. Signed-off-by: Eric Garver <e@erig.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-29sfc: use flow dissector helpers for aRFSEdward Cree1-54/+21
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-29ieee802154: fix logic error in ieee802154_llsec_parse_dev_addrBaozeng Ding1-2/+2
Fix a logic error to avoid potential null pointer dereference. Signed-off-by: Baozeng Ding <sploving1@gmail.com> Reviewed-by: Stefan Schmidt<stefan@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-29net: nps_enet: Disable interrupts before napi rescheduleElad Kanfi1-1/+3
Since NAPI works by shutting down event interrupts when theres work and turning them on when theres none, the net driver must make sure that interrupts are disabled when it reschedules polling. By calling napi_reschedule, the driver switches to polling mode, therefor there should be no interrupt interference. Any received packets will be handled in nps_enet_poll by polling the HW indication of received packet until all packets are handled. Signed-off-by: Elad Kanfi <eladkan@mellanox.com> Acked-by: Noam Camus <noamca@mellanox.com> Tested-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-29net/lapb: tuse %*ph to dump buffersAndy Shevchenko3-15/+8
Use %*ph specifier to dump small buffers in hex format instead doing this byte-by-byte. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-29ptp: oops in ptp_ioctl()Dan Carpenter1-0/+1
If we pass ERR_PTR(-EFAULT) to kfree() then it's going to oops. Fixes: 2ece068e1b1d ('ptp: use memdup_user().') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-29fou: add Kconfig options for IPv6 supportArnd Bergmann3-2/+11
A previous patch added the fou6.ko module, but that failed to link in a couple of configurations: net/built-in.o: In function `ip6_tnl_encap_add_fou_ops': net/ipv6/fou6.c:88: undefined reference to `ip6_tnl_encap_add_ops' net/ipv6/fou6.c:94: undefined reference to `ip6_tnl_encap_add_ops' net/ipv6/fou6.c:97: undefined reference to `ip6_tnl_encap_del_ops' net/built-in.o: In function `ip6_tnl_encap_del_fou_ops': net/ipv6/fou6.c:106: undefined reference to `ip6_tnl_encap_del_ops' net/ipv6/fou6.c:107: undefined reference to `ip6_tnl_encap_del_ops' If CONFIG_IPV6=m, ip6_tnl_encap_add_ops/ip6_tnl_encap_del_ops are in a module, but fou6.c can still be built-in, and that obviously fails to link. Also, if CONFIG_IPV6=y, but CONFIG_IPV6_TUNNEL=m or CONFIG_IPV6_TUNNEL=n, the same problem happens for a different reason. This adds two new silent Kconfig symbols to work around both problems: - CONFIG_IPV6_FOU is now always set to 'm' if either CONFIG_NET_FOU=m or CONFIG_IPV6=m - CONFIG_IPV6_FOU_TUNNEL is set implicitly when IPV6_FOU is enabled and NET_FOU_IP_TUNNELS is also turned out, and it will ensure that CONFIG_IPV6_TUNNEL is also available. The options could be made user-visible as well, to give additional room for configuration, but it seems easier not to bother users with more choice here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: aa3463d65e7b ("fou: Add encap ops for IPv6 tunnels") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-29ipv6: hide ip6_encap_hlen/ip6_tnl_encap definitionsArnd Bergmann1-1/+2
A recent cleanup moved MAX_IPTUN_ENCAP_OPS along with some other definitions, but it is now invisible when CONFIG_INET is not defined, but still referenced from ip6_tunnel.h: In file included from net/xfrm/xfrm_input.c:17:0: include/net/ip6_tunnel.h:67:17: error: 'MAX_IPTUN_ENCAP_OPS' undeclared here (not in a function) ip6tun_encaps[MAX_IPTUN_ENCAP_OPS]; ^~~~~~~~~~~~~~~~~~~ This hides the ip6_encap_hlen and ip6_tnl_encap functions inside of CONFIG_INET so we don't run into the the problem. Alternatively we could move the macro out of the #ifdef again to restore the previous behavior Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 55c2bc143224 ("net: Cleanup encap items in ip_tunnels.h") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-29sparc64: Fix return from trap window fill crashes.David S. Miller5-52/+116
We must handle data access exception as well as memory address unaligned exceptions from return from trap window fill faults, not just normal TLB misses. Otherwise we can get an OOPS that looks like this: ld-linux.so.2(36808): Kernel bad sw trap 5 [#1] CPU: 1 PID: 36808 Comm: ld-linux.so.2 Not tainted 4.6.0 #34 task: fff8000303be5c60 ti: fff8000301344000 task.ti: fff8000301344000 TSTATE: 0000004410001601 TPC: 0000000000a1a784 TNPC: 0000000000a1a788 Y: 00000002 Not tainted TPC: <do_sparc64_fault+0x5c4/0x700> g0: fff8000024fc8248 g1: 0000000000db04dc g2: 0000000000000000 g3: 0000000000000001 g4: fff8000303be5c60 g5: fff800030e672000 g6: fff8000301344000 g7: 0000000000000001 o0: 0000000000b95ee8 o1: 000000000000012b o2: 0000000000000000 o3: 0000000200b9b358 o4: 0000000000000000 o5: fff8000301344040 sp: fff80003013475c1 ret_pc: 0000000000a1a77c RPC: <do_sparc64_fault+0x5bc/0x700> l0: 00000000000007ff l1: 0000000000000000 l2: 000000000000005f l3: 0000000000000000 l4: fff8000301347e98 l5: fff8000024ff3060 l6: 0000000000000000 l7: 0000000000000000 i0: fff8000301347f60 i1: 0000000000102400 i2: 0000000000000000 i3: 0000000000000000 i4: 0000000000000000 i5: 0000000000000000 i6: fff80003013476a1 i7: 0000000000404d4c I7: <user_rtt_fill_fixup+0x6c/0x7c> Call Trace: [0000000000404d4c] user_rtt_fill_fixup+0x6c/0x7c The window trap handlers are slightly clever, the trap table entries for them are composed of two pieces of code. First comes the code that actually performs the window fill or spill trap handling, and then there are three instructions at the end which are for exception processing. The userland register window fill handler is: add %sp, STACK_BIAS + 0x00, %g1; \ ldxa [%g1 + %g0] ASI, %l0; \ mov 0x08, %g2; \ mov 0x10, %g3; \ ldxa [%g1 + %g2] ASI, %l1; \ mov 0x18, %g5; \ ldxa [%g1 + %g3] ASI, %l2; \ ldxa [%g1 + %g5] ASI, %l3; \ add %g1, 0x20, %g1; \ ldxa [%g1 + %g0] ASI, %l4; \ ldxa [%g1 + %g2] ASI, %l5; \ ldxa [%g1 + %g3] ASI, %l6; \ ldxa [%g1 + %g5] ASI, %l7; \ add %g1, 0x20, %g1; \ ldxa [%g1 + %g0] ASI, %i0; \ ldxa [%g1 + %g2] ASI, %i1; \ ldxa [%g1 + %g3] ASI, %i2; \ ldxa [%g1 + %g5] ASI, %i3; \ add %g1, 0x20, %g1; \ ldxa [%g1 + %g0] ASI, %i4; \ ldxa [%g1 + %g2] ASI, %i5; \ ldxa [%g1 + %g3] ASI, %i6; \ ldxa [%g1 + %g5] ASI, %i7; \ restored; \ retry; nop; nop; nop; nop; \ b,a,pt %xcc, fill_fixup_dax; \ b,a,pt %xcc, fill_fixup_mna; \ b,a,pt %xcc, fill_fixup; And the way this works is that if any of those memory accesses generate an exception, the exception handler can revector to one of those final three branch instructions depending upon which kind of exception the memory access took. In this way, the fault handler doesn't have to know if it was a spill or a fill that it's handling the fault for. It just always branches to the last instruction in the parent trap's handler. For example, for a regular fault, the code goes: winfix_trampoline: rdpr %tpc, %g3 or %g3, 0x7c, %g3 wrpr %g3, %tnpc done All window trap handlers are 0x80 aligned, so if we "or" 0x7c into the trap time program counter, we'll get that final instruction in the trap handler. On return from trap, we have to pull the register window in but we do this by hand instead of just executing a "restore" instruction for several reasons. The largest being that from Niagara and onward we simply don't have enough levels in the trap stack to fully resolve all possible exception cases of a window fault when we are already at trap level 1 (which we enter to get ready to return from the original trap). This is executed inline via the FILL_*_RTRAP handlers. rtrap_64.S's code branches directly to these to do the window fill by hand if necessary. Now if you look at them, we'll see at the end: ba,a,pt %xcc, user_rtt_fill_fixup; ba,a,pt %xcc, user_rtt_fill_fixup; ba,a,pt %xcc, user_rtt_fill_fixup; And oops, all three cases are handled like a fault. This doesn't work because each of these trap types (data access exception, memory address unaligned, and faults) store their auxiliary info in different registers to pass on to the C handler which does the real work. So in the case where the stack was unaligned, the unaligned trap handler sets up the arg registers one way, and then we branched to the fault handler which expects them setup another way. So the FAULT_TYPE_* value ends up basically being garbage, and randomly would generate the backtrace seen above. Reported-by: Nick Alcock <nix@esperi.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-29Merge tag 'scsi-fixes' of ↵Linus Torvalds5-10/+25
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of four fixes noticed in the merge window. The aacraid one is an optimisation, the mp3sas one fixes a spurious printk, the sd_check_events one fixes a theoretical race and the failed zero length commands fixes a bug in our completion/retry routines that has been causing problems in the field" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: aacraid: do not activate events on non-SRC adapters mpt3sas: add missing curly braces sd: get disk reference in sd_check_events() scsi_lib: correctly retry failed zero length REQ_TYPE_FS commands
2016-05-29sparc: Harden signal return frame checks.David S. Miller5-45/+92
All signal frames must be at least 16-byte aligned, because that is the alignment we explicitly create when we build signal return stack frames. All stack pointers must be at least 8-byte aligned. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-29Linux 4.7-rc1v4.7-rc1Linus Torvalds1-3/+3
2016-05-29hash_string: Fix zero-length case for !DCACHE_WORD_ACCESSGeorge Spelvin1-2/+2
The self-test was updated to cover zero-length strings; the function needs to be updated, too. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: George Spelvin <linux@sciencehorizons.net> Fixes: fcfd2fbf22d2 ("fs/namei.c: Add hashlen_string() function") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-28Rename other copy of hash_string to hashlen_stringGeorge Spelvin1-2/+2
The original name was simply hash_string(), but that conflicted with a function with that name in drivers/base/power/trace.c, and I decided that calling it "hashlen_" was better anyway. But you have to do it in two places. [ This caused build errors for architectures that don't define CONFIG_DCACHE_WORD_ACCESS - Linus ] Signed-off-by: George Spelvin <linux@sciencehorizons.net> Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: fcfd2fbf22d2 ("fs/namei.c: Add hashlen_string() function") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-28hpfs: implement the show_options methodMikulas Patocka1-11/+32
The HPFS filesystem used generic_show_options to produce string that is displayed in /proc/mounts. However, there is a problem that the options may disappear after remount. If we mount the filesystem with option1 and then remount it with option2, /proc/mounts should show both option1 and option2, however it only shows option2 because the whole option string is replaced with replace_mount_options in hpfs_remount_fs. To fix this bug, implement the hpfs_show_options function that prints options that are currently selected. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-19 09:07:41 +0000