summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-02-28crypto: arm64/chacha - fix chacha_4block_xor_neon() for big endianEric Biggers1-0/+16
The change to encrypt a fifth ChaCha block using scalar instructions caused the chacha20-neon, xchacha20-neon, and xchacha12-neon self-tests to start failing on big endian arm64 kernels. The bug is that the keystream block produced in 32-bit scalar registers is directly XOR'd with the data words, which are loaded and stored in native endianness. Thus in big endian mode the data bytes end up XOR'd with the wrong bytes. Fix it by byte-swapping the keystream words in big endian mode. Fixes: 2fe55987b262 ("crypto: arm64/chacha - use combined SIMD/ALU routine for more speed") Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-27netlabel: fix out-of-bounds memory accessesPaul Moore2-2/+4
There are two array out-of-bounds memory accesses, one in cipso_v4_map_lvl_valid(), the other in netlbl_bitmap_walk(). Both errors are embarassingly simple, and the fixes are straightforward. As a FYI for anyone backporting this patch to kernels prior to v4.8, you'll want to apply the netlbl_bitmap_walk() patch to cipso_v4_bitmap_walk() as netlbl_bitmap_walk() doesn't exist before Linux v4.8. Reported-by: Jann Horn <jannh@google.com> Fixes: 446fda4f2682 ("[NetLabel]: CIPSOv4 engine") Fixes: 3faa8f982f95 ("netlabel: Move bitmap manipulation functions to the NetLabel core.") Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27ipv4: Pass original device to ip_rcv_finish_coreDavid Ahern1-4/+5
ip_route_input_rcu expects the original ingress device (e.g., for proper multicast handling). The skb->dev can be changed by l3mdev_ip_rcv, so dev needs to be saved prior to calling it. This was the behavior prior to the listify changes. Fixes: 5fa12739a53d0 ("net: ipv4: listify ip_rcv_finish") Cc: Edward Cree <ecree@solarflare.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27Merge branch 'pmtu-selftest-fixes'David S. Miller1-16/+80
Paolo Abeni says: ==================== selftests: pmtu: fix and increase coverage This series includes a fixup for the pmtu.sh test script, related to IPv6 address management, and adds coverage for the recently reported and fixed PMTU exception issue v2 -> v3: - more cleanups v1 -> v2: - several script cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27selftests: pmtu: add explicit tests for PMTU exceptions cleanupPaolo Abeni1-1/+67
Add a couple of new tests, explicitly checking that the kernel timely releases PMTU exceptions on related device removal. This is mostly a regression test vs the issue fixed by commit f5b51fe804ec ("ipv6: route: purge exception on removal") Only 2 new test cases have been added, instead of extending all the existing ones, because the reproducer requires executing several commands and would slow down too much the tests otherwise. v2 -> v3: - more cleanup, still from Stefano v1 -> v2: - several script cleanups, as suggested by Stefano Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27selftests: pmtu: disable DAD in all namespacesPaolo Abeni1-15/+13
Otherwise, the configured IPv6 address could be still "tentative" at test time, possibly causing tests failures. We can also drop some sleep along the code and decrease the timeout for most commands so that the test runtime decreases. v1 -> v2: - fix comment (Stefano) Fixes: d1f1b9cbf34c ("selftests: net: Introduce first PMTU test") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27net: phy: dp83867: add soft reset delayMax Uvarov1-0/+3
Similar to dp83640 delay after soft reset is needed to set up registers correctly. Signed-off-by: Max Uvarov <muvarov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28drm/bochs: Fix the ID mismatch errorAlistair Francis1-0/+4
When running RISC-V QEMU with the Bochs device attached via PCIe the probe of the Bochs device fails with: [drm:bochs_hw_init] *ERROR* ID mismatch This was introduced by this commit: 7780eb9ce8 bochs: convert to drm_dev_register To fix the error we ensure that pci_enable_device() is called before bochs_load(). Fixes: 7780eb9ce80f ("bochs: convert to drm_dev_register") Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reported-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20190221003231.31625-1-alistair.francis@wdc.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-02-28drm: Block fb changes for async plane updatesNicholas Kazlauskas1-0/+9
The prepare_fb call always happens on new_plane_state. The drm_atomic_helper_cleanup_planes checks to see if plane state pointer has changed when deciding to call cleanup_fb on either the new_plane_state or the old_plane_state. For a non-async atomic commit the state pointer is swapped, so this helper calls prepare_fb on the new_plane_state and cleanup_fb on the old_plane_state. This makes sense, since we want to prepare the framebuffer we are going to use and cleanup the the framebuffer we are no longer using. For the async atomic update helpers this differs. The async atomic update helpers perform in-place updates on the existing state. They call drm_atomic_helper_cleanup_planes but the state pointer is not swapped. This means that prepare_fb is called on the new_plane_state and cleanup_fb is called on the new_plane_state (not the old). In the case where old_plane_state->fb == new_plane_state->fb then there should be no behavioral difference between an async update and a non-async commit. But there are issues that arise when old_plane_state->fb != new_plane_state->fb. The first is that the new_plane_state->fb is immediately cleaned up after it has been prepared, so we're using a fb that we shouldn't be. The second occurs during a sequence of async atomic updates and non-async regular atomic commits. Suppose there are two framebuffers being interleaved in a double-buffering scenario, fb1 and fb2: - Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1 - Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2 - Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2 We call cleanup_fb on fb2 twice in this example scenario, and any further use will result in use-after-free. The simple fix to this problem is to block framebuffer changes in the drm_atomic_helper_async_check function for now. v2: Move check by itself, add a FIXME (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Cc: <stable@vger.kernel.org> # v4.14+ Fixes: fef9df8b5945 ("drm/atomic: initial support for asynchronous plane update") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/275364/ Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-02-28Merge tag 'imx-drm-next-2019-02-22' of git://git.pengutronix.de/pza/linux ↵Dave Airlie9-33/+109
into drm-next drm/imx: handle pending updates better, add plane zpos property support - Add a mechanism to only send commit done events once all pending updates have been applied. This closes a small race window where already armed events could fire even though the double buffered hardware update just missed the update window. - Add plane zpos property support to allow placing the overlay plane behind the primary plane. - Allow building imx-drm on all platforms under COMPILE_TEST. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Philipp Zabel <pza@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20190222112350.m3ucezilqx6cyest@pengutronix.de
2019-02-27MIPS: fix memory setup for platforms with PHYS_OFFSET != 0Thomas Bogendoerfer1-1/+2
For platforms, which use a PHYS_OFFSET != 0, symbol _end also contains that offset. So when calling memblock_reserve() for reserving kernel the size argument needs to be adjusted. Fixes: bcec54bf3118 ("mips: switch to NO_BOOTMEM") Acked-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # v4.20+
2019-02-28Merge branch 'drm-fixes-5.0' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie2-4/+24
into drm-fixes Fix for variable refresh rate stuttering Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190227192115.14597-1-alexander.deucher@amd.com
2019-02-27mm: enforce min addr even if capable() in expand_downwards()Jann Horn1-4/+3
security_mmap_addr() does a capability check with current_cred(), but we can reach this code from contexts like a VFS write handler where current_cred() must not be used. This can be abused on systems without SMAP to make NULL pointer dereferences exploitable again. Fixes: 8869477a49c3 ("security: protect from stack expansion into low vm addresses") Cc: stable@kernel.org Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-27net: nfc: Fix NULL dereference on nfc_llcp_build_tlv failsYueHaibing2-4/+40
KASAN report this: BUG: KASAN: null-ptr-deref in nfc_llcp_build_gb+0x37f/0x540 [nfc] Read of size 3 at addr 0000000000000000 by task syz-executor.0/5401 CPU: 0 PID: 5401 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 kasan_report+0x171/0x18d mm/kasan/report.c:321 memcpy+0x1f/0x50 mm/kasan/common.c:130 nfc_llcp_build_gb+0x37f/0x540 [nfc] nfc_llcp_register_device+0x6eb/0xb50 [nfc] nfc_register_device+0x50/0x1d0 [nfc] nfcsim_device_new+0x394/0x67d [nfcsim] ? 0xffffffffc1080000 nfcsim_init+0x6b/0x1000 [nfcsim] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9cb79dcc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003 RBP: 00007f9cb79dcc70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9cb79dd6bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 nfc_llcp_build_tlv will return NULL on fails, caller should check it, otherwise will trigger a NULL dereference. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: eda21f16a5ed ("NFC: Set MIU and RW values from CONNECT and CC LLCP frames") Fixes: d646960f7986 ("NFC: Initial LLCP support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27drm/amd/display: Use vrr friendly pageflip throttling in DC.Mario Kleiner2-4/+24
In VRR mode, keep track of the vblank count of the last completed pageflip in amdgpu_crtc->last_flip_vblank, as recorded in the pageflip completion handler after each completed flip. Use that count to prevent mmio programming a new pageflip within the same vblank in which the last pageflip completed, iow. to throttle pageflips to at most one flip per video frame, while at the same time allowing to request a flip not only before start of vblank, but also anywhere within vblank. The old logic did the same, and made sense for regular fixed refresh rate flipping, but in vrr mode it prevents requesting a flip anywhere inside the possibly huge vblank, thereby reducing framerate in vrr mode instead of improving it, by delaying a slightly delayed flip requests up to a maximum vblank duration + 1 scanout duration. This would limit VRR usefulness to only help applications with a very high GPU demand, which can submit the flip request before start of vblank, but then have to wait long for fences to complete. With this method a flip can be both requested and - after fences have completed - executed, ie. it doesn't matter if the request (amdgpu_dm_do_flip()) gets delayed until deep into the extended vblank due to cpu execution delays. This also allows clients which want to regulate framerate within the vrr range a much more fine-grained control of flip timing, a feature that might be useful for video playback, and is very useful for neuroscience/vision research applications. In regular non-VRR mode, retain the old flip submission behavior. This to keep flip scheduling for fullscreen X11/GLX OpenGL clients intact, if they use the GLX_OML_sync_control extensions glXSwapBufferMscOML(, ..., target_msc,...) function with a specific target_msc target vblank count. glXSwapBuffersMscOML() or DRI3/Present PresentPixmap() will not flip at the proper target_msc for a non-zero target_msc if VRR mode is active with this patch. They'd often flip one frame too early. However, this limitation should not matter much in VRR mode, as scheduling based on vblank counts is pretty futile/unusable under variable refresh duration anyway, so no real extra harm is done. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Michel Dänzer <michel@daenzer.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-27net: phy: Micrel KSZ8061: link failure after cable connectRajasingh Thavamani1-1/+12
With Micrel KSZ8061 PHY, the link may occasionally not come up after Ethernet cable connect. The vendor's (Microchip, former Micrel) errata sheet 80000688A.pdf descripes the problem and possible workarounds in detail, see below. The batch implements workaround 1, which permanently fixes the issue. DESCRIPTION Link-up may not occur properly when the Ethernet cable is initially connected. This issue occurs more commonly when the cable is connected slowly, but it may occur any time a cable is connected. This issue occurs in the auto-negotiation circuit, and will not occur if auto-negotiation is disabled (which requires that the two link partners be set to the same speed and duplex). END USER IMPLICATIONS When this issue occurs, link is not established. Subsequent cable plug/unplaug cycle will not correct the issue. WORk AROUND There are four approaches to work around this issue: 1. This issue can be prevented by setting bit 15 in MMD device address 1, register 2, prior to connecting the cable or prior to setting the Restart Auto-negotiation bit in register 0h. The MMD registers are accessed via the indirect access registers Dh and Eh, or via the Micrel EthUtil utility as shown here: . if using the EthUtil utility (usually with a Micrel KSZ8061 Evaluation Board), type the following commands: > address 1 > mmd 1 > iw 2 b61a . Alternatively, write the following registers to write to the indirect MMD register: Write register Dh, data 0001h Write register Eh, data 0002h Write register Dh, data 4001h Write register Eh, data B61Ah 2. The issue can be avoided by disabling auto-negotiation in the KSZ8061, either by the strapping option, or by clearing bit 12 in register 0h. Care must be taken to ensure that the KSZ8061 and the link partner will link with the same speed and duplex. Note that the KSZ8061 defaults to full-duplex when auto-negotiation is off, but other devices may default to half-duplex in the event of failed auto-negotiation. 3. The issue can be avoided by connecting the cable prior to powering-up or resetting the KSZ8061, and leaving it plugged in thereafter. 4. If the above measures are not taken and the problem occurs, link can be recovered by setting the Restart Auto-Negotiation bit in register 0h, or by resetting or power cycling the device. Reset may be either hardware reset or software reset (register 0h, bit 15). PLAN This errata will not be corrected in the future revision. Fixes: 7ab59dc15e2f ("drivers/net/phy/micrel_phy: Add support for new PHYs") Signed-off-by: Alexander Onnasch <alexander.onnasch@landisgyr.com> Signed-off-by: Rajasingh Thavamani <T.Rajasingh@landisgyr.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27enc28j60: Correct description of debug module parameterAndy Shevchenko1-1/+1
The netif_msg_init() API takes on input the amount of bits to be set. The description of debug parameter in the enc28j60 module is misleading in this sense and passing 0xffff does not give an expected behaviour. Fix the description of debug module parameter to show what exactly is expected. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27net: dev: Use unsigned integer as an argument to left-shiftAndy Shevchenko1-1/+1
1 << 31 is Undefined Behaviour according to the C standard. Use U type modifier to avoid theoretical overflow. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27bnxt_en: Drop oversize TX packets to prevent errors.Michael Chan1-0/+6
There have been reports of oversize UDP packets being sent to the driver to be transmitted, causing error conditions. The issue is likely caused by the dst of the SKB switching between 'lo' with 64K MTU and the hardware device with a smaller MTU. Patches are being proposed by Mahesh Bandewar <maheshb@google.com> to fix the issue. In the meantime, add a quick length check in the driver to prevent the error. The driver uses the TX packet size as index to look up an array to setup the TX BD. The array is large enough to support all MTU sizes supported by the driver. The oversize TX packet causes the driver to index beyond the array and put garbage values into the TX BD. Add a simple check to prevent this. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27mmc: core: align max segment size with logical block sizeMing Lei2-7/+8
Logical block size is the lowest possible block size that the storage device can address. Max segment size is often related with controller's DMA capability. And it is reasonable to align max segment size with logical block size. SDHCI sets un-aligned max segment size, and causes ADMA error, so fix it by aligning max segment size with logical block size. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: linux-block@vger.kernel.org Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-27mmc: cqhci: Fix a tiny potential memory leak on error conditionAlamy Liu1-1/+10
Free up the allocated memory in the case of error return The value of mmc_host->cqe_enabled stays 'false'. Thus, cqhci_disable (mmc_cqe_ops->cqe_disable) won't be called to free the memory. Also, cqhci_disable() seems to be designed to disable and free all resources, not suitable to handle this corner case. Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host") Signed-off-by: Alamy Liu <alamy.liu@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-27mmc: cqhci: fix space allocated for transfer descriptorAlamy Liu1-1/+1
There is not enough space being allocated when DCMD is disabled. CQE_DCMD is not necessary to be enabled when CQE is enabled. (Software could halt CQE to send command) In the case that CQE_DCMD is not enabled, it still needs to allocate space for data transfer. For instance: CQE_DCMD is enabled: 31 slots space (one slot used by DCMD) CQE_DCMD is disabled: 32 slots space Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host") Signed-off-by: Alamy Liu <alamy.liu@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-27scsi: core: Avoid that system resume triggers a kernel warningBart Van Assche1-1/+0
scsi_device_quiesce() and scsi_device_resume() are called during system-wide suspend and resume. scsi_device_quiesce() only succeeds for SCSI devices that are in one of the RUNNING, OFFLINE or TRANSPORT_OFFLINE states (see also scsi_set_device_state()). This patch avoids that the following warning is triggered when resuming a system for which quiescing a SCSI device failed: WARNING: CPU: 2 PID: 11303 at drivers/scsi/scsi_lib.c:2600 scsi_device_resume+0x4f/0x58 CPU: 2 PID: 11303 Comm: kworker/u8:70 Not tainted 5.0.0-rc1+ #50 Hardware name: LENOVO 80E3/Lancer 5B2, BIOS A2CN45WW(V2.13) 08/04/2016 Workqueue: events_unbound async_run_entry_fn Call Trace: scsi_dev_type_resume+0x2e/0x60 async_run_entry_fn+0x32/0xd8 process_one_work+0x1f4/0x420 worker_thread+0x28/0x3c0 kthread+0x118/0x130 ret_from_fork+0x22/0x40 Cc: Przemek Socha <soprwa@gmail.com> Reported-by: Przemek Socha <soprwa@gmail.com> Fixes: 3a0a529971ec ("block, scsi: Make SCSI quiesce and resume work reliably") # v4.15 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-27mmc: core: Fix NULL ptr crash from mmc_should_fail_requestRitesh Harjani1-1/+1
In case of CQHCI, mrq->cmd may be NULL for data requests (non DCMD). In such case mmc_should_fail_request is directly dereferencing mrq->cmd while cmd is NULL. Fix this by checking for mrq->cmd pointer. Fixes: 72a5af554df8 ("mmc: core: Add support for handling CQE requests") Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-26arm64: dts: qcom: msm8998: Extend TZ reserved memory areaMarc Gonzalez1-1/+1
My console locks up as soon as Linux writes to [88800000,88f00000[ AFAIU, that memory area is reserved for trustzone. Extend TZ reserved memory range, to prevent Linux from stepping on trustzone's toes. Cc: stable@vger.kernel.org # 4.20+ Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Fixes: c7833949564ec ("arm64: dts: qcom: msm8998: Add smem related nodes") Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-02-26Merge tag 'qcom-fixes-for-5.0-rc3' into fixes-for-5.0-rc8Andy Gross1-1/+1
Qualcomm ARM64 Fixes for 5.0-rc3 * Fix irq controller compatible for the MSM8996 platforms
2019-02-26tipc: fix race condition causing hung sendtoTung Nguyen1-1/+5
When sending multicast messages via blocking socket, if sending link is congested (tsk->cong_link_cnt is set to 1), the sending thread will be put into sleeping state. However, tipc_sk_filter_rcv() is called under socket spin lock but tipc_wait_for_cond() is not. So, there is no guarantee that the setting of tsk->cong_link_cnt to 0 in tipc_sk_proto_rcv() in CPU-1 will be perceived by CPU-0. If that is the case, the sending thread in CPU-0 after being waken up, will continue to see tsk->cong_link_cnt as 1 and put the sending thread into sleeping state again. The sending thread will sleep forever. CPU-0 | CPU-1 tipc_wait_for_cond() | { | // condition_ = !tsk->cong_link_cnt | while ((rc_ = !(condition_))) { | ... | release_sock(sk_); | wait_woken(); | | if (!sock_owned_by_user(sk)) | tipc_sk_filter_rcv() | { | ... | tipc_sk_proto_rcv() | { | ... | tsk->cong_link_cnt--; | ... | sk->sk_write_space(sk); | ... | } | ... | } sched_annotate_sleep(); | lock_sock(sk_); | remove_wait_queue(); | } | } | This commit fixes it by adding memory barrier to tipc_sk_proto_rcv() and tipc_wait_for_cond(). Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-26hv_netvsc: Fix IP header checksum for coalesced packetsHaiyang Zhang1-3/+19
Incoming packets may have IP header checksum verified by the host. They may not have IP header checksum computed after coalescing. This patch re-compute the checksum when necessary, otherwise the packets may be dropped, because Linux network stack always checks it. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-26Merge branch 'net-fail-route'David S. Miller3-0/+11
David Ahern says: ==================== net: Fail route add with unsupported nexthop attribute RTA_VIA was added for MPLS as a way of specifying a gateway from a different address family. IPv4 and IPv6 do not currently support RTA_VIA so using it leads to routes that are not what the user intended. Catch and fail - returning a proper error message. MPLS on the other hand does not support RTA_GATEWAY since it does not make sense to have a nexthop from the MPLS address family. Similarly, catch and fail - returning a proper error message. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-26mpls: Return error for RTA_GATEWAY attributeDavid Ahern1-0/+3
MPLS does not support nexthops with an MPLS address family. Specifically, it does not handle RTA_GATEWAY attribute. Make it clear by returning an error. Fixes: 03c0566542f4c ("mpls: Netlink commands to add, remove, and dump routes") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-26ipv6: Return error for RTA_VIA attributeDavid Ahern1-0/+4
IPv6 currently does not support nexthops outside of the AF_INET6 family. Specifically, it does not handle RTA_VIA attribute. If it is passed in a route add request, the actual route added only uses the device which is clearly not what the user intended: $ ip -6 ro add 2001:db8:2::/64 via inet 172.16.1.1 dev eth0 $ ip ro ls ... 2001:db8:2::/64 dev eth0 metric 1024 pref medium Catch this and fail the route add: $ ip -6 ro add 2001:db8:2::/64 via inet 172.16.1.1 dev eth0 Error: IPv6 does not support RTA_VIA attribute. Fixes: 03c0566542f4c ("mpls: Netlink commands to add, remove, and dump routes") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-26ipv4: Return error for RTA_VIA attributeDavid Ahern1-0/+4
IPv4 currently does not support nexthops outside of the AF_INET family. Specifically, it does not handle RTA_VIA attribute. If it is passed in a route add request, the actual route added only uses the device which is clearly not what the user intended: $ ip ro add 172.16.1.0/24 via inet6 2001:db8:1::1 dev eth0 $ ip ro ls ... 172.16.1.0/24 dev eth0 Catch this and fail the route add: $ ip ro add 172.16.1.0/24 via inet6 2001:db8:1::1 dev eth0 Error: IPv4 does not support RTA_VIA attribute. Fixes: 03c0566542f4c ("mpls: Netlink commands to add, remove, and dump routes") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-26bpf: decrease usercnt if bpf_map_new_fd() fails in bpf_map_get_fd_by_id()Peng Sun1-1/+1
In bpf/syscall.c, bpf_map_get_fd_by_id() use bpf_map_inc_not_zero() to increase the refcount, both map->refcnt and map->usercnt. Then, if bpf_map_new_fd() fails, should handle map->usercnt too. Fixes: bd5f5f4ecb78 ("bpf: Add BPF_MAP_GET_FD_BY_ID") Signed-off-by: Peng Sun <sironhide0null@gmail.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-26iommu/dmar: Fix buffer overflow during PCI bus notificationJulia Cartwright1-1/+1
Commit 57384592c433 ("iommu/vt-d: Store bus information in RMRR PCI device path") changed the type of the path data, however, the change in path type was not reflected in size calculations. Update to use the correct type and prevent a buffer overflow. This bug manifests in systems with deep PCI hierarchies, and can lead to an overflow of the static allocated buffer (dmar_pci_notify_info_buf), or can lead to overflow of slab-allocated data. BUG: KASAN: global-out-of-bounds in dmar_alloc_pci_notify_info+0x1d5/0x2e0 Write of size 1 at addr ffffffff90445d80 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.14.87-rt49-02406-gd0a0e96 #1 Call Trace: ? dump_stack+0x46/0x59 ? print_address_description+0x1df/0x290 ? dmar_alloc_pci_notify_info+0x1d5/0x2e0 ? kasan_report+0x256/0x340 ? dmar_alloc_pci_notify_info+0x1d5/0x2e0 ? e820__memblock_setup+0xb0/0xb0 ? dmar_dev_scope_init+0x424/0x48f ? __down_write_common+0x1ec/0x230 ? dmar_dev_scope_init+0x48f/0x48f ? dmar_free_unused_resources+0x109/0x109 ? cpumask_next+0x16/0x20 ? __kmem_cache_create+0x392/0x430 ? kmem_cache_create+0x135/0x2f0 ? e820__memblock_setup+0xb0/0xb0 ? intel_iommu_init+0x170/0x1848 ? _raw_spin_unlock_irqrestore+0x32/0x60 ? migrate_enable+0x27a/0x5b0 ? sched_setattr+0x20/0x20 ? migrate_disable+0x1fc/0x380 ? task_rq_lock+0x170/0x170 ? try_to_run_init_process+0x40/0x40 ? locks_remove_file+0x85/0x2f0 ? dev_prepare_static_identity_mapping+0x78/0x78 ? rt_spin_unlock+0x39/0x50 ? lockref_put_or_lock+0x2a/0x40 ? dput+0x128/0x2f0 ? __rcu_read_unlock+0x66/0x80 ? __fput+0x250/0x300 ? __rcu_read_lock+0x1b/0x30 ? mntput_no_expire+0x38/0x290 ? e820__memblock_setup+0xb0/0xb0 ? pci_iommu_init+0x25/0x63 ? pci_iommu_init+0x25/0x63 ? do_one_initcall+0x7e/0x1c0 ? initcall_blacklisted+0x120/0x120 ? kernel_init_freeable+0x27b/0x307 ? rest_init+0xd0/0xd0 ? kernel_init+0xf/0x120 ? rest_init+0xd0/0xd0 ? ret_from_fork+0x1f/0x40 The buggy address belongs to the variable: dmar_pci_notify_info_buf+0x40/0x60 Fixes: 57384592c433 ("iommu/vt-d: Store bus information in RMRR PCI device path") Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-02-26mmc: tmio: fix access width of Block Count RegisterTakeshi Saito3-1/+11
In R-Car Gen2 or later, the maximum number of transfer blocks are changed from 0xFFFF to 0xFFFFFFFF. Therefore, Block Count Register should use iowrite32(). If another system (U-boot, Hypervisor OS, etc) uses bit[31:16], this value will not be cleared. So, SD/MMC card initialization fails. So, check for the bigger register and use apropriate write. Also, mark the register as extended on Gen2. Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> [wsa: use max_blk_count in if(), add Gen2, update commit message] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: stable@kernel.org Reviewed-by: Simon Horman <horms+renesas@verge.net.au> [Ulf: Fixed build error] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25scsi: hptiop: fix calls to dma_set_mask()Hannes Reinecke1-3/+7
The change to use dma_set_mask() incorrectly made a second call with the 32 bit DMA mask value when the call with the 64 bit DMA mask value succeeded. Fixes: 453cd3700ca3 ("scsi: hptiop: use dma_set_mask") Cc: <stable@vger.kernel.org> Suggested-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-25scsi: hisi_sas: fix calls to dma_set_mask_and_coherent()Hannes Reinecke2-5/+11
The change to use dma_set_mask_and_coherent() incorrectly made a second call with the 32 bit DMA mask value when the call with the 64 bit DMA mask value succeeded. [mkp: fixed commit message] Fixes: e4db40e7a1a2 ("scsi: hisi_sas: use dma_set_mask_and_coherent") Cc: <stable@vger.kernel.org> Suggested-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-25scsi: csiostor: fix calls to dma_set_mask_and_coherent()Hannes Reinecke1-2/+5
The change to use dma_set_mask_and_coherent() incorrectly made a second call with the 32 bit DMA mask value when the call with the 64 bit DMA mask value succeeded. Fixes: c22b332d811b ("scsi: csiostor: switch to generic DMA API") Cc: <stable@vger.kernel.org> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-25scsi: bfa: fix calls to dma_set_mask_and_coherent()Hannes Reinecke1-5/+13
The change to use dma_set_mask_and_coherent() incorrectly made a second call with the 32 bit DMA mask value when the call with the 64 bit DMA mask value succeeded. [mkp: fixed commit message] Fixes: a69b080025ea ("scsi: bfa: use dma_set_mask_and_coherent") Cc: <stable@vger.kernel.org> Suggested-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-25scsi: aic94xx: fix calls to dma_set_mask_and_coherent()Hannes Reinecke1-3/+5
The change to use dma_set_mask_and_coherent() incorrectly made a second call with the 32 bit DMA mask value when the call with the 64 bit DMA mask value succeeded. [mkp: fixed subject] Fixes: 3a21986f1a59 ("scsi: aic94xx: fully convert to the generic DMA API") Cc: <stable@vger.kernel.org> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-25scsi: 3w-sas: fix calls to dma_set_mask_and_coherent()Hannes Reinecke1-4/+8
The change to use dma_set_mask_and_coherent() incorrectly made a second call with the 32 bit DMA mask value when the call with the 64 bit DMA mask value succeeded. Fixes: b1fa122930c4 ("scsi: 3w-sas: fully convert to the generic DMA API") Cc: <stable@vger.kernel.org> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-25scsi: 3w-9xxx: fix calls to dma_set_mask_and_coherent()Hannes Reinecke1-5/+9
The change to use dma_set_mask_and_coherent() incorrectly made a second call with the 32 bit DMA mask value when the call with the 64 bit DMA mask value succeeded. Fixes: b000bced5739 ("scsi: 3w-9xxx: fully convert to the generic DMA API") Cc: <stable@vger.kernel.org> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-25scsi: lpfc: fix calls to dma_set_mask_and_coherent()Hannes Reinecke1-7/+12
The change to use dma_set_mask_and_coherent() incorrectly made a second call with the 32 bit DMA mask value when the call with the 64 bit DMA mask value succeeded. This resulted in NVMe/FC connections failing due to corrupted data buffers, and various other SCSI/FCP I/O errors. Fixes: f30e1bfd6154 ("scsi: lpfc: use dma_set_mask_and_coherent") Cc: <stable@vger.kernel.org> Suggested-by: Don Dutile <ddutile@redhat.com> Signed-off-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-25net: avoid use IPCB in cipso_v4_errorNazarov Sergey3-7/+34
Extract IP options in cipso_v4_error and use __icmp_send. Signed-off-by: Sergey Nazarov <s-nazarov@yandex.ru> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25net: Add __icmp_send helper.Nazarov Sergey2-4/+12
Add __icmp_send function having ip_options struct parameter Signed-off-by: Sergey Nazarov <s-nazarov@yandex.ru> Reviewed-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25tun: remove unnecessary memory barrierTimur Celik1-1/+1
Replace set_current_state with __set_current_state since no memory barrier is needed at this point. Signed-off-by: Timur Celik <mail@timurcelik.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25MIPS: BCM63XX: provide DMA masks for ethernet devicesJonas Gorski1-0/+8
The switch to the generic dma ops made dma masks mandatory, breaking devices having them not set. In case of bcm63xx, it broke ethernet with the following warning when trying to up the device: [ 2.633123] ------------[ cut here ]------------ [ 2.637949] WARNING: CPU: 0 PID: 325 at ./include/linux/dma-mapping.h:516 bcm_enetsw_open+0x160/0xbbc [ 2.647423] Modules linked in: gpio_button_hotplug [ 2.652361] CPU: 0 PID: 325 Comm: ip Not tainted 4.19.16 #0 [ 2.658080] Stack : 80520000 804cd3ec 00000000 00000000 804ccc00 87085bdc 87d3f9d4 804f9a17 [ 2.666707] 8049cf18 00000145 80a942a0 00000204 80ac0000 10008400 87085b90 eb3d5ab7 [ 2.675325] 00000000 00000000 80ac0000 000022b0 00000000 00000000 00000007 00000000 [ 2.683954] 0000007a 80500000 0013b381 00000000 80000000 00000000 804a1664 80289878 [ 2.692572] 00000009 00000204 80ac0000 00000200 00000002 00000000 00000000 80a90000 [ 2.701191] ... [ 2.703701] Call Trace: [ 2.706244] [<8001f3c8>] show_stack+0x58/0x100 [ 2.710840] [<800336e4>] __warn+0xe4/0x118 [ 2.715049] [<800337d4>] warn_slowpath_null+0x48/0x64 [ 2.720237] [<80289878>] bcm_enetsw_open+0x160/0xbbc [ 2.725347] [<802d1d4c>] __dev_open+0xf8/0x16c [ 2.729913] [<802d20cc>] __dev_change_flags+0x100/0x1c4 [ 2.735290] [<802d21b8>] dev_change_flags+0x28/0x70 [ 2.740326] [<803539e0>] devinet_ioctl+0x310/0x7b0 [ 2.745250] [<80355fd8>] inet_ioctl+0x1f8/0x224 [ 2.749939] [<802af290>] sock_ioctl+0x30c/0x488 [ 2.754632] [<80112b34>] do_vfs_ioctl+0x740/0x7dc [ 2.759459] [<80112c20>] ksys_ioctl+0x50/0x94 [ 2.763955] [<800240b8>] syscall_common+0x34/0x58 [ 2.768782] ---[ end trace fb1a6b14d74e28b6 ]--- [ 2.773544] bcm63xx_enetsw bcm63xx_enetsw.0: cannot allocate rx ring 512 Fix this by adding appropriate DMA masks for the platform devices. Fixes: f8c55dc6e828 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: stable@vger.kernel.org # v4.19+
2019-02-25afs: Fix manually set volume location server listDavid Howells1-0/+1
When a cell with a volume location server list is added manually by echoing the details into /proc/net/afs/cells, a record is added but the flag saying it has been looked up isn't set. This causes the VL server rotation code to wait forever, with the top of /proc/pid/stack looking like: afs_select_vlserver+0x3a6/0x6f3 afs_vl_lookup_vldb+0x4b/0x92 afs_create_volume+0x25/0x1b9 ... with the thread stuck in afs_start_vl_iteration() waiting for AFS_CELL_FL_NO_LOOKUP_YET to be cleared. Fix this by clearing AFS_CELL_FL_NO_LOOKUP_YET when setting up a record if that record's details were supplied manually. Fixes: 0a5143f2f89c ("afs: Implement VL server rotation") Reported-by: Dave Botsch <dwb7@cornell.edu> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-25tmpfs: fix uninitialized return value in shmem_linkDarrick J. Wong1-1/+1
When we made the shmem_reserve_inode call in shmem_link conditional, we forgot to update the declaration for ret so that it always has a known value. Dan Carpenter pointed out this deficiency in the original patch. Fixes: 1062af920c07 ("tmpfs: fix link accounting when a tmpfile is linked in") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Matej Kupljen <matej.kupljen@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-25x86/uaccess: Don't leak the AC flag into __put_user() value evaluationAndy Lutomirski1-2/+4
When calling __put_user(foo(), ptr), the __put_user() macro would call foo() in between __uaccess_begin() and __uaccess_end(). If that code were buggy, then those bugs would be run without SMAP protection. Fortunately, there seem to be few instances of the problem in the kernel. Nevertheless, __put_user() should be fixed to avoid doing this. Therefore, evaluate __put_user()'s argument before setting AC. This issue was noticed when an objtool hack by Peter Zijlstra complained about genregs_get() and I compared the assembly output to the C source. [ bp: Massage commit message and fixed up whitespace. ] Fixes: 11f1a4b9755f ("x86: reorganize SMAP handling in user space accesses") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190225125231.845656645@infradead.org
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 17:50:45 +0000