summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-03-07ASoC: Samsung: Merge neo1937_wm8753 and neo1973_gta02_wm8753 sound board driverLars-Peter Clausen4-522/+196
The neo1973(GTA01) and neo1973_gta02(GTA02) have a very similar audio hardware setup. They both use the same codec with the same routing to the gsm modem and bluetooth chip. But they do use different AMPs though and there are some minor differences in the speaker setup. As a result most of the code of those two drivers is identical. So from a maintenance point of view it makes sense to merge them into a single driver. It also reduces the size of kernel images supporting both the GTA01 and GTA02. As a side-effect of this merge the GTA01 for example gains support for routing audio to and from the bluetooth DAI. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: neo1973_gta02_wm8753: Use gpio_request_array to request gpiosLars-Peter Clausen1-35/+17
Using gpio_request_array instead of requesting and setting up each gpio by hand makes the code more readable and more compact. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: neo1973_gta02_wm8753: Remove lm4853_{set,get}_stateLars-Peter Clausen1-48/+7
This patch drops the lm4853_{set,get}_state functions and the "Amp State Switch" control. Those were noops which existed to maintain alsa state file compatibility. Since the control names have changed due to internal changes in the ASoC core and state file compatibility was broken anyway it makes sense to drop them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: neo1973_wm8753: Move lm4857 specefic code to its own moduleLars-Peter Clausen6-236/+347
This patch moves the code for the lm4857 AMP from the neo1973_wm8753 sound board driver to its own module. The lm4857 is a generic AMP IC and not specific to the neo1973. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: neo1973_wm8753: Remove scenario management code.Lars-Peter Clausen1-137/+11
It has been proven to be inflexible to do scenario management in kernel space. Since actual neo1973 board support has not been merged in mainline and this patch has been in the neo1973 tree for some time now it should be safe to remove this functionality without breaking existing userspace. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: Add machine driver for Visstrim_M10 board.Javier Martin3-0/+149
Visstrim_M10 boards have an external tlcv320aic3205 codec attached to SSI1. This driver glues together both interfaces. External amplifier is not supported in this first version. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: Constify i2c_device_id tableAxel Lin2-2/+2
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: tlv320dac33: add MODULE_DEVICE_TABLEAxel Lin1-0/+1
The device table is required to load modules based on modaliases. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: Add missing debugfs conditionalsMark Brown1-0/+2
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-07ASoC: Fix outdated API usage in tlv320aic32x4Mark Brown1-5/+5
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-07drm/i915: Rebind the buffer if its alignment constraints changes with tilingChris Wilson3-5/+21
Early gen3 and gen2 chipset do not have the relaxed per-surface tiling constraints of the later chipsets, so we need to check that the GTT alignment is correct for the new tiling. If it is not, we need to rebind. Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-03-07drm/i915: Disable GPU semaphores by defaultChris Wilson3-2/+6
Andi Kleen narrowed his GPU hangs on his Sugar Bay (SNB desktop) rev 09 down to the use of GPU semaphores, and we already know that they appear broken up to Huron River (mobile) rev 08. (I'm optimistic that disabling GPU semaphores is simply hiding another bug by the latency and side-effects of the additional device interaction it introduces...) However, use of semaphores is a massive performance improvement... Only as long as the system remains stable. Enable at your peril. Reported-by: Andi Kleen <andi-fd@firstfloor.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33921 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-03-06Merge branch 'for-linus' of ↵Linus Torvalds5-15/+57
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Don't set to D3 in Cirrus errata init verbs ALSA: hda - add new Fermi 5xx codec IDs to snd-hda ASoC: WM8994: Ensure late enable events are processed for the ADCs ASoC: WM8994: Don't disable the AIF[1|2]CLK_ENA unconditionaly ASoC: Fix WM9081 platform data initialisation ALSA: hda - Fix unable to record issue on ASUS N82JV ALSA: HDA: Realtek: Fixup jack detection to input subsystem
2011-03-06virtio: console: Don't access vqs if device was unpluggedAmit Shah1-0/+8
If a virtio-console device gets unplugged while a port is open, a subsequent close() call on the port accesses vqs to free up buffers. This can lead to a crash. The buffers are already freed up as a result of the call to unplug_ports() from virtcons_remove(). The fix is to simply not access vq information if port->portdev is NULL. Reported-by: juzhang <juzhang@redhat.com> CC: stable@kernel.org Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-06Merge branch 'fix/asoc' into for-linusTakashi Iwai2-9/+47
2011-03-06drm/i915: Do not overflow the MMADDR write FIFOChris Wilson6-19/+42
Whilst the GT is powered down (rc6), writes to MMADDR are placed in a FIFO by the System Agent. This is a limited resource, only 64 entries, of which 20 are reserved for Display and PCH writes, and so we must take care not to queue up too many writes. To avoid this, there is counter which we can poll to ensure there are sufficient free entries in the fifo. "Issuing a write to a full FIFO is not supported; at worst it could result in corruption or a system hang." Reported-and-Tested-by: Matt Turner <mattst88@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34056 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-03-06Revert "drm/i915: fix corruptions on i8xx due to relaxed fencing"Chris Wilson1-15/+1
This reverts commit c2e0eb167070a6e9dcb49c84c13c79a30d672431. As it turns out, userspace already depends upon being able to enable tiling on existing bo which it promises to be large enough for its purposes i.e. it will not access beyond the end of the last full-tile row. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35016 Reported-and-tested-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-03-05Merge branch 'for-linus' of ↵Linus Torvalds6-50/+72
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: no .snap inside of snapped namespace libceph: fix msgr standby handling libceph: fix msgr keepalive flag libceph: fix msgr backoff libceph: retry after authorization failure libceph: fix handling of short returns from get_user_pages ceph: do not clear I_COMPLETE from d_release ceph: do not set I_COMPLETE Revert "ceph: keep reference to parent inode on ceph_dentry"
2011-03-04mm: use correct numa policy node for transparent hugepagesAndi Kleen2-8/+19
Pass down the correct node for a transparent hugepage allocation. Most callers continue to use the current node, however the hugepaged daemon now uses the previous node of the first to be collapsed page instead. This ensures that khugepaged does not mess up local memory for an existing process which uses local policy. The choice of node is somewhat primitive currently: it just uses the node of the first page in the pmd range. An alternative would be to look at multiple pages and use the most popular node. I used the simplest variant for now which should work well enough for the case of all pages being on the same node. [akpm@linux-foundation.org: coding-style fixes] Acked-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04mm: preserve original node for transparent huge page copiesAndi Kleen1-2/+2
This makes a difference for LOCAL policy, where the node cannot be determined from the policy itself, but has to be gotten from the original page. Acked-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04mm: add alloc_page_vma_node()Andi Kleen1-0/+2
Add a alloc_page_vma_node that allows passing the "local" node in. Used in a followon patch. Acked-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04mm: change alloc_pages_vma to pass down the policy node for local policyAndi Kleen3-11/+11
Currently alloc_pages_vma() always uses the local node as policy node for the LOCAL policy. Pass this node down as an argument instead. No behaviour change from this patch, but will be needed for followons. Acked-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04RapidIO: Update MAINTAINERSAlexandre Bounine1-0/+1
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04drivers/video/backlight/ltv350qv.c: fix a memory leakAxel Lin1-1/+8
Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04MAINTAINERS: add maintainer of Samsung Mobile Machine supportKyungmin Park1-0/+9
Add maintainer of Samsung Mobile machine support. Currently, Aquila, Goni, Universal (C210), and Nuri board are supported. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Joe Perches <joe@perches.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04pps: make pps_gen_parport depend on BROKENThomas Gleixner1-1/+1
This driver causes hard lockups, when the active clock soure is jiffies. The reason is that it loops with interrupts disabled waiting for a timestamp to be reached by polling getnstimeofday(). Though with a jiffies clocksource, when that code runs on the same CPU which is responsible for updating jiffies, then we loop in circles for ever simply because the timer interrupt cannot update jiffies. So both UP and SMP can be affected. There is no easy fix for that problem so make it depend on BROKEN for now. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: Rodolfo Giometti <giometti@linux.it> Cc: john stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04drivers/misc/bmp085.c: add MODULE_DEVICE_TABLEAxel Lin1-0/+1
The device table is required to load modules based on modaliases. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Shubhrajyoti D <shubhrajyoti@ti.com> Cc: Christoph Mair <christoph.mair@gmail.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04cpuset: add a missing unlock in cpuset_write_resmask()Li Zefan1-2/+5
Don't forget to release cgroup_mutex if alloc_trial_cpuset() fails. [akpm@linux-foundation.org: avoid multiple return points] Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Cc: Paul Menage <menage@google.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04drivers/rtc/rtc-s3c.c: fix prototype for s3c_rtc_setaie()Axel Lin1-5/+7
Fix s3c_rtc_setaie() prototype to eliminate the following compile warning: drivers/rtc/rtc-s3c.c:383: warning: initialization from incompatible pointer type (akpm: the rtc_class_ops.alarm_irq_enable() handler is being passed two arguments where it expects just one, presumably with undesired effects) Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04Merge branch 'for-linus' of ↵Linus Torvalds2-4/+14
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: Blackfin: iflush: update anomaly 05000491 workaround Blackfin: outs[lwb]: make sure count is greater than 0
2011-03-04Merge branch 'rmobile-fixes-for-linus' of ↵Linus Torvalds6-15/+27
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: ARM: mach-shmobile: mackerel: modify LCDC clock divider value ARM: mach-shmobile: ap4evb: modify LCDC clock divider value ARM: mach-shmobile: mackerel: fixup memory initialize for zboot ARM: mach-shmobile: ap4evb: fixup memory initialize for zboot ARM: mach-shmobile: Add sh73a0 MIPI-CSI and CEU clocks ARM: mach-shmobile: AG5EVM MIPI-DSI LCD reset delay fix
2011-03-04Merge branch 'sh-fixes-for-linus' of ↵Linus Torvalds4-6/+22
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Change __nosave_XXX symbols to long sh: Flush executable pages in copy_user_highpage sh: Ensure ST40-300 BogoMIPS value is consistent sh: sh7750: Fix incompatible pointer type sh: sh7750: move machtypes.h to include/generated
2011-03-04Merge branch 'drm-fixes' of ↵Linus Torvalds3-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/nouveau: allocate kernel's notifier object at end of block
2011-03-04nfs4: Ensure that ACL pages sent over NFS were not allocated from the slab (v3)Neil Horman1-2/+42
The "bad_page()" page allocator sanity check was reported recently (call chain as follows): bad_page+0x69/0x91 free_hot_cold_page+0x81/0x144 skb_release_data+0x5f/0x98 __kfree_skb+0x11/0x1a tcp_ack+0x6a3/0x1868 tcp_rcv_established+0x7a6/0x8b9 tcp_v4_do_rcv+0x2a/0x2fa tcp_v4_rcv+0x9a2/0x9f6 do_timer+0x2df/0x52c ip_local_deliver+0x19d/0x263 ip_rcv+0x539/0x57c netif_receive_skb+0x470/0x49f :virtio_net:virtnet_poll+0x46b/0x5c5 net_rx_action+0xac/0x1b3 __do_softirq+0x89/0x133 call_softirq+0x1c/0x28 do_softirq+0x2c/0x7d do_IRQ+0xec/0xf5 default_idle+0x0/0x50 ret_from_intr+0x0/0xa default_idle+0x29/0x50 cpu_idle+0x95/0xb8 start_kernel+0x220/0x225 _sinittext+0x22f/0x236 It occurs because an skb with a fraglist was freed from the tcp retransmit queue when it was acked, but a page on that fraglist had PG_Slab set (indicating it was allocated from the Slab allocator (which means the free path above can't safely free it via put_page. We tracked this back to an nfsv4 setacl operation, in which the nfs code attempted to fill convert the passed in buffer to an array of pages in __nfs4_proc_set_acl, which gets used by the skb->frags list in xs_sendpages. __nfs4_proc_set_acl just converts each page in the buffer to a page struct via virt_to_page, but the vfs allocates the buffer via kmalloc, meaning the PG_slab bit is set. We can't create a buffer with kmalloc and free it later in the tcp ack path with put_page, so we need to either: 1) ensure that when we create the list of pages, no page struct has PG_Slab set or 2) not use a page list to send this data Given that these buffers can be multiple pages and arbitrarily sized, I think (1) is the right way to go. I've written the below patch to allocate a page from the buddy allocator directly and copy the data over to it. This ensures that we have a put_page free-able page for every entry that winds up on an skb frag list, so it can be safely freed when the frame is acked. We do a put page on each entry after the rpc_call_sync call so as to drop our own reference count to the page, leaving only the ref count taken by tcp_sendpages. This way the data will be properly freed when the ack comes in Successfully tested by myself to solve the above oops. Note, as this is the result of a setacl operation that exceeded a page of data, I think this amounts to a local DOS triggerable by an uprivlidged user, so I'm CCing security on this as well. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Trond Myklebust <Trond.Myklebust@netapp.com> CC: security@kernel.org CC: Jeff Layton <jlayton@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04ceph: no .snap inside of snapped namespaceSage Weil1-0/+1
Otherwise you can do things like # mkdir .snap/foo # cd .snap/foo/.snap # ls <badness> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-04libceph: fix msgr standby handlingSage Weil1-8/+22
The standby logic used to be pretty dependent on the work requeueing behavior that changed when we switched to WQ_NON_REENTRANT. It was also very fragile. Restructure things so that: - We clear WRITE_PENDING when we set STANDBY. This ensures we will requeue work when we wake up later. - con_work backs off if STANDBY is set. There is nothing to do if we are in standby. - clear_standby() helper is called by both con_send() and con_keepalive(), the two actions that can wake us up again. Move the connect_seq++ logic here. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-04libceph: fix msgr keepalive flagSage Weil2-6/+4
There was some broken keepalive code using a dead variable. Shift to using the proper bit flag. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-04libceph: fix msgr backoffSage Weil2-2/+29
With commit f363e45f we replaced a bunch of hacky workqueue mutual exclusion logic with the WQ_NON_REENTRANT flag. One pieces of fallout is that the exponential backoff breaks in certain cases: * con_work attempts to connect. * we get an immediate failure, and the socket state change handler queues immediate work. * con_work calls con_fault, we decide to back off, but can't queue delayed work. In this case, we add a BACKOFF bit to make con_work reschedule delayed work next time it runs (which should be immediately). Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-04MAINTAINERS: Update shaggy's email addressDave Kleikamp1-1/+1
Signed-off-by: Dave Kleikamp <shaggy@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04ASoC: Add TI tlv320aic32x4 codec support.Javier Martin5-0/+974
This patch adds support for tlv320aic3205 and tlv320aic3254 codecs. It doesn't include miniDSP support for aic3254. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-04Mark ptrace_{traceme,attach,detach} staticLinus Torvalds2-6/+3
They are only used inside kernel/ptrace.c, and have been for a long time. We don't want to go back to the bad-old-days when architectures did things on their own, so make them static and private. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04ARM: S3C64XX: Update regulator names for debugfs compatiblity on SMDK6410Mark Brown1-6/+6
The debugfs support added to the regulator API (which has been merged in during this merge window) creates directories for regulators named after the display names for the regulators so replace / as a separator for multiple supplies with + in the SMDK6410 machine. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Fix build with WM1190 disabled and WM1192 enabled on SMDK6410Mark Brown1-0/+1
Avoid relying on implicit inclusion of machine.h Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Reduce output of s3c64xx_dma_init1()Ben Dooks1-5/+6
Reduce the logging output of s3c64xx_dma_init1() as it is not useful for normal bootup (and we get an overall indication of the registration of the PL180 DMA block). This removes the following output from the log: s3c64xx_dma_init1: registering DMA 0 (e0808100) s3c64xx_dma_init1: registering DMA 1 (e0808120) s3c64xx_dma_init1: registering DMA 2 (e0808140) s3c64xx_dma_init1: registering DMA 3 (e0808160) s3c64xx_dma_init1: registering DMA 4 (e0808180) s3c64xx_dma_init1: registering DMA 5 (e08081a0) s3c64xx_dma_init1: registering DMA 6 (e08081c0) s3c64xx_dma_init1: registering DMA 7 (e08081e0) Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Tone down SDHCI debuggingMark Brown1-1/+1
The MMC core calls s3c6400_setup_sdhcp_cfg_card() very frequently, causing the log message in there at KERN_INFO to be displayed a lot which is slow and overly chatty. Convert the message into a pr_debug() to tone this down. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Add clock for i2c1Ben Dooks1-0/+6
The clock for i2c1 has been missing for a while, add it to the list of clocks for the system and ensure it is initialised at startup. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Staticise non-exported GPIO to interrupt functionsMark Brown1-2/+2
No need to put these in the global namespace and sparse gets upset. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devicesMark Brown1-0/+2
Ensures that the declaration agrees with the definition and makes sparse happy. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Fix keypad setup to configure correct number of rowsBen Dooks1-1/+1
The call to s3c_gpio_cfgrange_nopull() takes a size and base but this looks like it is trying to do base and end. This means it is configuring too many GPIOs and on the case of the Cragganmore means we're seeing an overflow of the ROW pins causing problems with the keyboard driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C2440: Fix usage gpio bank j pin definitions on GTA02Lars-Peter Clausen1-13/+13
The gta02 header file still uses the old S3C2410_GPJx defines instead of the S3C2410_GPJ(x) macro. Since the S3C2410_GPJx defines have already been removed this causes the following build failure: sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_set_spk': sound/soc/samsung/neo1973_wm8753.c:259: error: 'S3C2440_GPJ2' undeclared (first use in this function) sound/soc/samsung/neo1973_wm8753.c:259: error: (Each undeclared identifier is reported only once sound/soc/samsung/neo1973_wm8753.c:259: error: for each function it appears in.) sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_get_spk': sound/soc/samsung/neo1973_wm8753.c:267: error: 'S3C2440_GPJ2' undeclared (first use in this function) sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_event': sound/soc/samsung/neo1973_wm8753.c:276: error: 'S3C2440_GPJ1' undeclared (first use in this function) sound/soc/samsung/neo1973_wm8753.c: At top level: sound/soc/samsung/neo1973_wm8753.c:439: error: 'S3C2440_GPJ2' undeclared here (not in a function) sound/soc/samsung/neo1973_wm8753.c:440: error: 'S3C2440_GPJ1' undeclared here (not in a function) This patches fixes the issue by doing a s,S3C2410_GPJ([\d]+),S3C2410_GPJ(\1),g on the file. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-19 00:47:06 +0000