summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2020-07-14drm/amd/display: p-state warning occurs while changing resolution from 120hz ↵hersen wu1-2/+34
to 60hz [Why] new calculated dispclk, dppclk are stored in context->bw_ctx.bw.dcn.clk.dispclk_khz, dppclk_khz. Current dispclk, dppclk are from dc->clk_mgr->clks.dispclk_khz. dcn_validate_bandwidth compute new dispclk, dppclk. dispclk will put in use after optimize_bandwidth when ramp_up_dispclk_with_dpp is called. There are two places for dppclk be put in use. One location is the same as the location as dispclk. Another is within update_dchubp_dpp which happens between pre_bandwidth and optimize_bandwidth. dppclk updated within update_dchubp_dpp will cause new clock values of dispclk and dppclk not be in use at the same time. when clocks are decreased, this may cause dppclk is lower than current configuration and let pipe stuck. for example, eDP + external dp, change resolution of DP from 1920x1080x144hz to 1280x960x60hz. before change: dispclk = 337889 dppclk = 337889 change mode, dcn_validate_bandwidth calculate dispclk = 143122 dppclk = 143122 update_dchubp_dpp be executed before dispclk be updated, dispclk = 337889, but dppclk use new value dispclk /2 = 168944. this will cause pipe pstate warning issue. [How] between pre_bandwidth and optimize_bandwidth, while dispclk is going to be decreased, keep dppclk = dispclk Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: OLED panel backlight adjust not work with external display ↵hersen wu1-0/+5
connected [Why] amdgpu_dm->backlight_caps is for single eDP only. the caps are upddated for very connector. Real eDP caps will be overwritten by other external display. For OLED panel, caps->aux_support is set to 1 for OLED pnael. after external connected, caps+.aux_support is set to 0. This causes OLED backlight adjustment not work. [How] within update_conector_ext_caps, backlight caps will be updated only for eDP connector. Cc: stable@vger.kernel.org Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: reduce sr_xxx_time by 3 us when ppt disableChiawen Huang4-3/+55
[Why] when ppt disabled, the watermark doesn't get fine tune causing underflow. [How] It is a temporary solution to reduce sr_xxx_time by 3 us when ppt disable. Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: Power down hardware if set mode is not called before timeoutSung Lee8-32/+52
[WHY] In headless systems, if set mode is not called, hardware will not be powered down on boot, causing HW/SW discrepancies. Powering down hardware on boot will ensure SW state is accurate. [HOW] Set a timer callback on boot for 10 seconds. If set mode is not called within that time, power down hardware. Otherwise, do not power down. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: update dml varDmytro Laktyushkin2-6/+4
Update *DynamicMetadata variables for providing more flexibility. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amdgpu/powerplay: Target power profile mode should be the second ↵chen gong1-3/+3
parameter of renoir_set_power_profile_mode A small mistake Signed-off-by: chen gong <curry.gong@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu/display: create fake mst encoders ahead of time (v4)Alex Deucher4-28/+48
Prevents a warning in the MST create connector case. v2: create global fake encoders rather per connector fake encoders to avoid running out of encoder indices. v3: use the actual number of crtcs on the asic rather than the max to conserve encoders. v4: v3 plus missing hunk I forgot to git add. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1108 Fixes: c6385e503aeaf9 ("drm/amdgpu: drop legacy drm load and unload callbacks") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu: fix spelling mistake "Falied" -> "Failed"Colin Ian King1-1/+1
There is a spelling mistake in a DRM_ERROR error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu: fix preemption unit testJack Xiao1-5/+15
Remove signaled jobs from job list and ensure the job was indeed preempted. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu/gfx10: fix race condition for kiqJack Xiao1-1/+8
During preemption test for gfx10, it uses kiq to trigger gfx preemption, which would result in race condition with flushing TLB for kiq. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu: minor cleanup of phase1 suspend codeNirmoy Das1-10/+13
Cleanup of phase1 suspend code to reduce unnecessary indentation. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: put dpm frequency setting common code in smu_v11_0.cEvan Quan6-96/+129
As designed the common code shared among all smu v11 ASCIs go to smu_v11_0.c. This helps to maintain clear code layers. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: revise calling chain on retrieving frequency rangeEvan Quan9-59/+87
This helps to maintain clear code layers and drop unnecessary parameter. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: revise calling chain on setting soft limitEvan Quan6-41/+49
This helps to maintain clear code layers and drop unnecessary parameter. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: put setting hard limit common code in smu_v11_0.cEvan Quan6-49/+53
As designed the common code shared among all smu v11 ASCIs go to smu_v11_0.c. This helps to maintain clear code layers. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: drop unused code and wrapper around clock retrievingEvan Quan10-114/+22
Clean code by dropping unnecessary ones. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: unshare the code for retrieving current clock frequencyEvan Quan6-16/+41
By moving them into asic specific file. Since they are really ASIC specific. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: bypass wrapper on retrieving current clock frequencyEvan Quan3-189/+184
By calling the target API(asic specific) directly. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: drop unnecessary wrappers around clock retrievingEvan Quan8-16/+10
By calling the target APIs directly. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: update driver if file for sienna_cichlidLikun Gao3-6/+14
Update sienna_cichlid driver if header and related files. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: correct the .get_workload_type() pointerEvan Quan1-1/+1
This seemed a typo. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10Revert "drm/amd/display: add mechanism to skip DCN init"Changfeng10-47/+72
To avoid s3 faild at the first cycle on renoir platform, it needs to revert this patch: drm/amd/display: add mechanism to skip DCN init Signed-off-by: changfeng <Changfeng.Zhu@amd.com> Ackedy-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/display: Fix CSC remap matrix not being applied on dcn30Nicholas Kazlauskas1-13/+14
[Why] DCN3 has two gamut remap matrices. When using CSC adjustment the CM remap is set to bypass and MPCC remap is used. However to bypass CM some state in the context is modified and not restored correctly resulting in subsequent calls to disable MPCC remap as well. [How] Fix logic for save/restore of remap enable flag when programming MPCC remap matrix. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/display: Use VUPDATE_NO_LOCK instead of VUPDATE for dcn30Nicholas Kazlauskas1-10/+18
[Why] Soft hangs occur when FreeSync is engaged since we utilize VUPDATE (which doesn't fire when holding the pipe lock) to send back vblank events when FreeSync is active. [How] The alternative (working) interrupt source for this mechanism is VUPDATE_NO_LOCK. We already use this all other DCN revisions so align dcn30 with those as well. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu: enable gpu recovery for sienna cichlidLikun Gao1-0/+1
Enable gpu recovery for sienna cichlid by default to trigger gpu recovery once needed. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu: remove unnecessary logic of ASIC checkLikun Gao3-15/+2
Remove some unused ASIC check logic. Remove some definition of amdgpu_device which only used by the removed ASIC check logic.(V2) Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu: don't do soft recovery if gpu_recovery=0Marek Olšák1-1/+2
It's impossible to debug shader hangs with soft recovery. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/radeon: fix double freeTom Rix1-4/+3
clang static analysis flags this error drivers/gpu/drm/radeon/ci_dpm.c:5652:9: warning: Use of memory after it is freed [unix.Malloc] kfree(rdev->pm.dpm.ps[i].ps_priv); ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/radeon/ci_dpm.c:5654:2: warning: Attempt to free released memory [unix.Malloc] kfree(rdev->pm.dpm.ps); ^~~~~~~~~~~~~~~~~~~~~~ problem is reported in ci_dpm_fini, with these code blocks. for (i = 0; i < rdev->pm.dpm.num_ps; i++) { kfree(rdev->pm.dpm.ps[i].ps_priv); } kfree(rdev->pm.dpm.ps); The first free happens in ci_parse_power_table where it cleans up locally on a failure. ci_dpm_fini also does a cleanup. ret = ci_parse_power_table(rdev); if (ret) { ci_dpm_fini(rdev); return ret; } So remove the cleanup in ci_parse_power_table and move the num_ps calculation to inside the loop so ci_dpm_fini will know how many array elements to free. Fixes: cc8dbbb4f62a ("drm/radeon: add dpm support for CI dGPUs (v2)") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08gpu/drm: Remove debug info about CPU addressTiezhu Yang2-5/+4
When I update the latest kernel, I see the following "____ptrval____" boot messages. [ 1.872600] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000048000c00 and cpu addr 0x(____ptrval____) [ 1.879095] radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x0000000040056038 and cpu addr 0x(____ptrval____) Both radeon_fence_driver_start_ring() and amdgpu_fence_driver_start_ring() have the similar issue, there exists the following two methods to solve it: (1) Use "%pK" instead of "%p" so that the CPU address can be printed when the kptr_restrict sysctl is set to 1. (2) Just completely drop the CPU address suggested by Christian, because the CPU address was useful in the past, but isn't any more. We now have a debugfs file to read the current fence values. Since the CPU address is not much useful, just remove the debug info about CPU address. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amd/display: Add missing CW4 programming for DCN30Nicholas Kazlauskas1-5/+16
[Why] To support inbox1 in CW4 we need to actually program CW4 instead of region 4 for newer firmware. This is done correctly on DCN20/DCN21 but this code wasn't added to DCN30. [How] Copy over the missing code. It doesn't need address translation since DCN30 uses virtual addressing. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amdgpu: use register distance member instead of hardcode in mmhub v9.4Huang Rui1-16/+21
This patch updates to use register distance member instead of hardcode in mmhub v9.4. Signed-off-by: Huang Rui <ray.huang@amd.com> Tested-by: AnZhong Huang <anzhong.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amdgpu: use register distance member instead of hardcode in mmhub v2Huang Rui1-15/+24
This patch updates to use register distance member instead of hardcode in mmhub v2. Signed-off-by: Huang Rui <ray.huang@amd.com> Tested-by: AnZhong Huang <anzhong.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amdgpu: use register distance member instead of hardcode in mmhub v1Huang Rui1-15/+24
This patch updates to use register distance member instead of hardcode in mmhub v1. Signed-off-by: Huang Rui <ray.huang@amd.com> Tested-by: AnZhong Huang <anzhong.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amdgpu: use register distance member instead of hardcode in gfxhub v2.1Huang Rui1-15/+24
This patch updates to use register distance member instead of hardcode in gfxhub v2.1. Signed-off-by: Huang Rui <ray.huang@amd.com> Tested-by: AnZhong Huang <anzhong.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amdgpu: use register distance member instead of hardcode in gfxhub v2Huang Rui1-15/+24
This patch updates to use register distance member instead of hardcode in gfxhub v2. Signed-off-by: Huang Rui <ray.huang@amd.com> Tested-by: AnZhong Huang <anzhong.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amdgpu: use register distance member instead of hardcode in gfxhub v1Huang Rui1-16/+25
This patch updates to use register distance member instead of hardcode in gfxhub v1. Signed-off-by: Huang Rui <ray.huang@amd.com> Tested-by: AnZhong Huang <anzhong.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amdgpu: use register distance member instead of hardcode in VCN2/JEPG2Huang Rui2-3/+4
This patch updates to use register distance member instead of hardcode in VCN2/JEPG2. They are for the same ASIC. Signed-off-by: Huang Rui <ray.huang@amd.com> Tested-by: AnZhong Huang <anzhong.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amdgpu: use register distance member instead of hardcode in UVD7/VCE4Huang Rui2-3/+5
This patch updates to use register distance member instead of hardcode in UVD7/VCE4. They are for the same ASIC. Signed-off-by: Huang Rui <ray.huang@amd.com> Tested-by: AnZhong Huang <anzhong.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amdgpu: use register distance member instead of hardcode in VCN1/JEPG1Huang Rui2-3/+4
This patch updates to use register distance member instead of hardcode in VCN1/JEPG1. They are for the same ASIC. Signed-off-by: Huang Rui <ray.huang@amd.com> Tested-by: AnZhong Huang <anzhong.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amdgpu: use register distance member instead of hardcode in GMC10Huang Rui1-17/+26
This patch updates to use register distance member instead of hardcode in GMC10. Signed-off-by: Huang Rui <ray.huang@amd.com> Tested-by: AnZhong Huang <anzhong.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amdgpu: use register distance member instead of hardcode in GMC9Huang Rui1-14/+25
This patch updates to use register distance member instead of hardcode in GMC9. Signed-off-by: Huang Rui <ray.huang@amd.com> Tested-by: AnZhong Huang <anzhong.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amdgpu: add register distance members into vmhub structureHuang Rui7-0/+54
This patch is to abstract register distances between two continuous context domains and invalidation engines. In different ip headers, these distances may be differences. Signed-off-by: Huang Rui <ray.huang@amd.com> Tested-by: AnZhong Huang <anzhong.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amdkfd: Remove redundant kfd2kgd interface lookupFelix Kuehling1-23/+8
kfd_pasid.c isn't using the kfd2kgd interface any more. Remove redundant code trying to look up a device for finding that interface. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amdgpu: Move the mutex lock/unlock outAlex Jivin1-8/+4
Move the mutext lock/unlock outside of the if(), as the mutex is always taken: either in the if() branch or in the else branch. Signed-off-by: Alex Jivin <alex.jivin@amd.com> Suggested-By: Luben Tukov <luben.tuikov@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amd/display: Add missing reg mask for dcn3Bhawanpreet Lakha1-0/+1
This field is missing for dcn3 so add it from dcn20. enc2_set_dynamic_metadata() trys to sets this and we get a generic_reg warning since the mask is not defined. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amd/display: Add logger for SMU msgWesley Chalmers2-3/+64
[WHY] We want to be able to see SMU messages sent and their responses Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amd/display: Request PHYCLK adjustment on PHY enable/disableJoshua Aberback6-25/+85
[Why] Currently we don't explicitly send a request for a minimum PHYCLK, and we hope that the dependencies other clocks have will raise PHYCLK when needed. [How] - new clk_mgr function to keep track of PHYCLK requirements - request maximum requirement across all links - remove PHYCLK from clock state comparator, as it doesn't come from DML Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amd/display: 3.2.93Anthony Koo1-1/+1
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amd/display: [FW Promotion] Release 0.0.23Anthony Koo1-12/+6
[Header Changes] - Drop unused firmware SCRATCH bits from interface Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amd/display: Remove VSC infoframe dep on DMCURoman Li1-17/+13
[Why] VSC infoframe is needed for PSR. Previously only DMCU controller supported PSR. Now DMUB also implements PSR. [How] Remove VSC infoframe dependency on DMCU. Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 18:56:34 +0000