summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-08-22ip_gre: add validation for csum_startShreyansh Chouhan1-0/+2
Validate csum_start in gre_handle_offloads before we call _gre_xmit so that we do not crash later when the csum_start value is used in the lco_csum function call. This patch deals with ipv4 code. Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Reported-by: syzbot+ff8e1b9f2f36481e2efc@syzkaller.appspotmail.com Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20stmmac: Revert "stmmac: align RX buffers"Marc Zyngier1-2/+2
This reverts commit a955318fe67e ("stmmac: align RX buffers"), which breaks at least one platform (Nvidia Jetson-X1), causing packet corruption. This is 100% reproducible, and reverting the patch results in a working system again. Given that it is "only" a performance optimisation, let's return to a known working configuration until we can have a good understanding of what is happening here. Fixes: a955318fe67e ("stmmac: align RX buffers") Cc: Matteo Croce <mcroce@linux.microsoft.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Link: https://lore.kernel.org/netdev/871r71azjw.wl-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210820183002.457226-1-maz@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-20net: usb: pegasus: fixes of set_register(s) return value evaluation;Petko Manolov1-2/+2
- restore the behavior in enable_net_traffic() to avoid regressions - Jakub Kicinski; - hurried up and removed redundant assignment in pegasus_open() before yet another checker complains; Fixes: 8a160e2e9aeb ("net: usb: pegasus: Check the return value of get_geristers() and friends;") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Petko Manolov <petko.manolov@konsulko.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20net: qrtr: fix another OOB Read in qrtr_endpoint_postXiaolong Huang1-1/+1
This check was incomplete, did not consider size is 0: if (len != ALIGN(size, 4) + hdrlen) goto err; if size from qrtr_hdr is 0, the result of ALIGN(size, 4) will be 0, In case of len == hdrlen and size == 0 in header this check won't fail and if (cb->type == QRTR_TYPE_NEW_SERVER) { /* Remote node endpoint can bridge other distant nodes */ const struct qrtr_ctrl_pkt *pkt = data + hdrlen; qrtr_node_assign(node, le32_to_cpu(pkt->server.node)); } will also read out of bound from data, which is hdrlen allocated block. Fixes: 194ccc88297a ("net: qrtr: Support decoding incoming v2 packets") Fixes: ad9d24c9429e ("net: qrtr: fix OOB Read in qrtr_endpoint_post") Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19ice: do not abort devlink info if board identifier can't be foundJacob Keller1-1/+3
The devlink dev info command reports version information about the device and firmware running on the board. This includes the "board.id" field which is supposed to represent an identifier of the board design. The ice driver uses the Product Board Assembly identifier for this. In some cases, the PBA is not present in the NVM. If this happens, devlink dev info will fail with an error. Instead, modify the ice_info_pba function to just exit without filling in the context buffer. This will cause the board.id field to be skipped. Log a dev_dbg message in case someone wants to confirm why board.id is not showing up for them. Fixes: e961b679fb0b ("ice: add board identifier info to devlink .info_get") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20210819223451.245613-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-19Merge tag 'net-5.14-rc7' of ↵Linus Torvalds39-206/+418
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes, including fixes from bpf, wireless and mac80211 trees. Current release - regressions: - tipc: call tipc_wait_for_connect only when dlen is not 0 - mac80211: fix locking in ieee80211_restart_work() Current release - new code bugs: - bpf: add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id() - ethernet: ice: fix perout start time rounding - wwan: iosm: prevent underflow in ipc_chnl_cfg_get() Previous releases - regressions: - bpf: clear zext_dst of dead insns - sch_cake: fix srchost/dsthost hashing mode - vrf: reset skb conntrack connection on VRF rcv - net/rds: dma_map_sg is entitled to merge entries Previous releases - always broken: - ethernet: bnxt: fix Tx path locking and races, add Rx path barriers" * tag 'net-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits) net: dpaa2-switch: disable the control interface on error path Revert "flow_offload: action should not be NULL when it is referenced" iavf: Fix ping is lost after untrusted VF had tried to change MAC i40e: Fix ATR queue selection r8152: fix the maximum number of PLA bp for RTL8153C r8152: fix writing USB_BP2_EN mptcp: full fully established support after ADD_ADDR mptcp: fix memory leak on address flush net/rds: dma_map_sg is entitled to merge entries net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU port net: asix: fix uninit value bugs ovs: clear skb->tstamp in forwarding path net: mdio-mux: Handle -EPROBE_DEFER correctly net: mdio-mux: Don't ignore memory allocation errors net: mdio-mux: Delete unnecessary devm_kfree net: dsa: sja1105: fix use-after-free after calling of_find_compatible_node, or worse sch_cake: fix srchost/dsthost hashing mode ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error path net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32 mac80211: fix locking in ieee80211_restart_work() ...
2021-08-19Merge tag 'platform-drivers-x86-v5.14-4' of ↵Linus Torvalds2-0/+30
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - Enable SW_TABLET_MODE support for the TP200s - Enable WMI on two more Gigabyte motherboards * tag 'platform-drivers-x86-v5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: gigabyte-wmi: add support for B450M S2H V2 platform/x86: gigabyte-wmi: add support for X570 GAMING X platform/x86: asus-nb-wmi: Add tablet_mode_sw=lid-flip quirk for the TP200s platform/x86: asus-nb-wmi: Allow configuring SW_TABLET_MODE method with a module option
2021-08-19net: dpaa2-switch: disable the control interface on error pathVladimir Oltean1-18/+18
Currently dpaa2_switch_takedown has a funny name and does not do the opposite of dpaa2_switch_init, which makes probing fail when we need to handle an -EPROBE_DEFER. A sketch of what dpaa2_switch_init does: dpsw_open dpaa2_switch_detect_features dpsw_reset for (i = 0; i < ethsw->sw_attr.num_ifs; i++) { dpsw_if_disable dpsw_if_set_stp dpsw_vlan_remove_if_untagged dpsw_if_set_tci dpsw_vlan_remove_if } dpsw_vlan_remove alloc_ordered_workqueue dpsw_fdb_remove dpaa2_switch_ctrl_if_setup When dpaa2_switch_takedown is called from the error path of dpaa2_switch_probe(), the control interface, enabled by dpaa2_switch_ctrl_if_setup from dpaa2_switch_init, remains enabled, because dpaa2_switch_takedown does not call dpaa2_switch_ctrl_if_teardown. Since dpaa2_switch_probe might fail due to EPROBE_DEFER of a PHY, this means that a second probe of the driver will happen with the control interface directly enabled. This will trigger a second error: [ 93.273528] fsl_dpaa2_switch dpsw.0: dpsw_ctrl_if_set_pools() failed [ 93.281966] fsl_dpaa2_switch dpsw.0: fsl_mc_driver_probe failed: -13 [ 93.288323] fsl_dpaa2_switch: probe of dpsw.0 failed with error -13 Which if we investigate the /dev/dpaa2_mc_console log, we find out is caused by: [E, ctrl_if_set_pools:2211, DPMNG] ctrl_if must be disabled So make dpaa2_switch_takedown do the opposite of dpaa2_switch_init (in reasonable limits, no reason to change STP state, re-add VLANs etc), and rename it to something more conventional, like dpaa2_switch_teardown. Fixes: 613c0a5810b7 ("staging: dpaa2-switch: enable the control interface") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20210819141755.1931423-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-19Revert "flow_offload: action should not be NULL when it is referenced"Ido Schimmel1-7/+5
This reverts commit 9ea3e52c5bc8bb4a084938dc1e3160643438927a. Cited commit added a check to make sure 'action' is not NULL, but 'action' is already dereferenced before the check, when calling flow_offload_has_one_action(). Therefore, the check does not make any sense and results in a smatch warning: include/net/flow_offload.h:322 flow_action_mixed_hw_stats_check() warn: variable dereferenced before check 'action' (see line 319) Fix by reverting this commit. Cc: gushengxian <gushengxian@yulong.com> Fixes: 9ea3e52c5bc8 ("flow_offload: action should not be NULL when it is referenced") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20210819105842.1315705-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-19Merge branch 'intel-wired-lan-driver-updates-2021-08-18'Jakub Kicinski4-4/+48
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-08-18 This series contains updates to i40e and iavf drivers. Arkadiusz fixes Flow Director not using the correct queue due to calling the wrong pick Tx function for i40e. Sylwester resolves traffic loss for iavf when it attempts to change its MAC address when it does not have permissions to do so. ==================== Link: https://lore.kernel.org/r/20210818174217.4138922-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-19iavf: Fix ping is lost after untrusted VF had tried to change MACSylwester Dziedziuch3-2/+47
Make changes to MAC address dependent on the response of PF. Disallow changes to HW MAC address and MAC filter from untrusted VF, thanks to that ping is not lost if VF tries to change MAC. Add a new field in iavf_mac_filter, to indicate whether there was response from PF for given filter. Based on this field pass or discard the filter. If untrusted VF tried to change it's address, it's not changed. Still filter was changed, because of that ping couldn't go through. Fixes: c5c922b3e09b ("iavf: fix MAC address setting for VFs when filter is rejected") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan G <Gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-19i40e: Fix ATR queue selectionArkadiusz Kubalewski1-2/+1
Without this patch, ATR does not work. Receive/transmit uses queue selection based on SW DCB hashing method. If traffic classes are not configured for PF, then use netdev_pick_tx function for selecting queue for packet transmission. Instead of calling i40e_swdcb_skb_tx_hash, call netdev_pick_tx, which ensures that packet is transmitted/received from CPU that is running the application. Reproduction steps: 1. Load i40e driver 2. Map each MSI interrupt of i40e port for each CPU 3. Disable ntuple, enable ATR i.e.: ethtool -K $interface ntuple off ethtool --set-priv-flags $interface flow-director-atr 4. Run application that is generating traffic and is bound to a single CPU, i.e.: taskset -c 9 netperf -H 1.1.1.1 -t TCP_RR -l 10 5. Observe behavior: Application's traffic should be restricted to the CPU provided in taskset. Fixes: 89ec1f0886c1 ("i40e: Fix queue-to-TC mapping on Tx") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-19Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski3-6/+29
Daniel Borkmann says: ==================== pull-request: bpf 2021-08-19 We've added 3 non-merge commits during the last 3 day(s) which contain a total of 3 files changed, 29 insertions(+), 6 deletions(-). The main changes are: 1) Fix to clear zext_dst for dead instructions which was causing invalid program rejections on JITs with bpf_jit_needs_zext such as s390x, from Ilya Leoshkevich. 2) Fix RCU splat in bpf_get_current_{ancestor_,}cgroup_id() helpers when they are invoked from sleepable programs, from Yonghong Song. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests, bpf: Test that dead ldx_w insns are accepted bpf: Clear zext_dst of dead insns bpf: Add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id() helpers ==================== Link: https://lore.kernel.org/r/20210819144904.20069-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-19Merge branch 'r8152-bp-settings'David S. Miller1-3/+20
Hayes Wang says: ==================== r8152: fix bp settings Fix the wrong bp settings of the firmware. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19r8152: fix the maximum number of PLA bp for RTL8153CHayes Wang1-2/+19
The maximum PLA bp number of RTL8153C is 16, not 8. That is, the bp 0 ~ 15 are at 0xfc28 ~ 0xfc46, and the bp_en is at 0xfc48. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19r8152: fix writing USB_BP2_ENHayes Wang1-1/+1
The register of USB_BP2_EN is 16 bits, so we should use ocp_write_word(), not ocp_write_byte(). Fixes: 9370f2d05a2a ("support request_firmware for RTL8153") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19Merge branch 'mptcp-fixes'David S. Miller2-39/+15
Mat Martineau says: ==================== mptcp: Bug fixes Here are two bug fixes for the net tree: Patch 1 fixes a memory leak that could be encountered when clearing the list of advertised MPTCP addresses. Patch 2 fixes a protocol issue early in an MPTCP connection, to ensure both peers correctly understand that the full MPTCP connection handshake has completed even when the server side quickly sends an ADD_ADDR option. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19mptcp: full fully established support after ADD_ADDRMatthieu Baerts1-7/+3
If directly after an MP_CAPABLE 3WHS, the client receives an ADD_ADDR with HMAC from the server, it is enough to switch to a "fully established" mode because it has received more MPTCP options. It was then OK to enable the "fully_established" flag on the MPTCP socket. Still, best to check if the ADD_ADDR looks valid by looking if it contains an HMAC (no 'echo' bit). If an ADD_ADDR echo is received while we are not in "fully established" mode, it is strange and then we should not switch to this mode now. But that is not enough. On one hand, the path-manager has be notified the state has changed. On the other hand, the "fully_established" flag on the subflow socket should be turned on as well not to re-send the MP_CAPABLE 3rd ACK content with the next ACK. Fixes: 84dfe3677a6f ("mptcp: send out dedicated ADD_ADDR packet") Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19mptcp: fix memory leak on address flushPaolo Abeni1-32/+12
The endpoint cleanup path is prone to a memory leak, as reported by syzkaller: BUG: memory leak unreferenced object 0xffff88810680ea00 (size 64): comm "syz-executor.6", pid 6191, jiffies 4295756280 (age 24.138s) hex dump (first 32 bytes): 58 75 7d 3c 80 88 ff ff 22 01 00 00 00 00 ad de Xu}<...."....... 01 00 02 00 00 00 00 00 ac 1e 00 07 00 00 00 00 ................ backtrace: [<0000000072a9f72a>] kmalloc include/linux/slab.h:591 [inline] [<0000000072a9f72a>] mptcp_nl_cmd_add_addr+0x287/0x9f0 net/mptcp/pm_netlink.c:1170 [<00000000f6e931bf>] genl_family_rcv_msg_doit.isra.0+0x225/0x340 net/netlink/genetlink.c:731 [<00000000f1504a2c>] genl_family_rcv_msg net/netlink/genetlink.c:775 [inline] [<00000000f1504a2c>] genl_rcv_msg+0x341/0x5b0 net/netlink/genetlink.c:792 [<0000000097e76f6a>] netlink_rcv_skb+0x148/0x430 net/netlink/af_netlink.c:2504 [<00000000ceefa2b8>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:803 [<000000008ff91aec>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<000000008ff91aec>] netlink_unicast+0x537/0x750 net/netlink/af_netlink.c:1340 [<0000000041682c35>] netlink_sendmsg+0x846/0xd80 net/netlink/af_netlink.c:1929 [<00000000df3aa8e7>] sock_sendmsg_nosec net/socket.c:704 [inline] [<00000000df3aa8e7>] sock_sendmsg+0x14e/0x190 net/socket.c:724 [<000000002154c54c>] ____sys_sendmsg+0x709/0x870 net/socket.c:2403 [<000000001aab01d7>] ___sys_sendmsg+0xff/0x170 net/socket.c:2457 [<00000000fa3b1446>] __sys_sendmsg+0xe5/0x1b0 net/socket.c:2486 [<00000000db2ee9c7>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000db2ee9c7>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 [<000000005873517d>] entry_SYSCALL_64_after_hwframe+0x44/0xae We should not require an allocation to cleanup stuff. Rework the code a bit so that the additional RCU work is no more needed. Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-18net/rds: dma_map_sg is entitled to merge entriesGerd Rausch1-2/+2
Function "dma_map_sg" is entitled to merge adjacent entries and return a value smaller than what was passed as "nents". Subsequently "ib_map_mr_sg" needs to work with this value ("sg_dma_len") rather than the original "nents" parameter ("sg_len"). This old RDS bug was exposed and reliably causes kernel panics (using RDMA operations "rds-stress -D") on x86_64 starting with: commit c588072bba6b ("iommu/vt-d: Convert intel iommu driver to the iommu ops") Simply put: Linux 5.11 and later. Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Link: https://lore.kernel.org/r/60efc69f-1f35-529d-a7ef-da0549cad143@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-18net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU portVladimir Oltean1-0/+1
Currently we are unable to ping a bridge on top of a felix switch which uses the ocelot-8021q tagger. The packets are dropped on the ingress of the user port and the 'drop_local' counter increments (the counter which denotes drops due to no valid destinations). Dumping the PGID tables, it becomes clear that the PGID_SRC of the user port is zero, so it has no valid destinations. But looking at the code, the cpu_fwd_mask (the bit mask of DSA tag_8021q ports) is clearly missing from the forwarding mask of ports that are under a bridge. So this has always been broken. Looking at the version history of the patch, in v7 https://patchwork.kernel.org/project/netdevbpf/patch/20210125220333.1004365-12-olteanv@gmail.com/ the code looked like this: /* Standalone ports forward only to DSA tag_8021q CPU ports */ unsigned long mask = cpu_fwd_mask; (...) } else if (ocelot->bridge_fwd_mask & BIT(port)) { mask |= ocelot->bridge_fwd_mask & ~BIT(port); while in v8 (the merged version) https://patchwork.kernel.org/project/netdevbpf/patch/20210129010009.3959398-12-olteanv@gmail.com/ it looked like this: unsigned long mask; (...) } else if (ocelot->bridge_fwd_mask & BIT(port)) { mask = ocelot->bridge_fwd_mask & ~BIT(port); So the breakage was introduced between v7 and v8 of the patch. Fixes: e21268efbe26 ("net: dsa: felix: perform switch setup for tag_8021q") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210817160425.3702809-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-18Merge tag 'for-5.14-rc6-tag' of ↵Linus Torvalds1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fix from David Sterba: "One more fix for cross-rename, adding a missing check for directory and subvolume, this could lead to a crash" * tag 'for-5.14-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: prevent rename2 from exchanging a subvol with a directory from different parents
2021-08-18Merge tag 'sound-5.14-rc7' of ↵Linus Torvalds7-9/+35
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Only a few regression fixes and trivial device quirks" * tag 'sound-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/via: Apply runtime PM workaround for ASUS B23E ALSA: hda: Fix hang during shutdown due to link reset ALSA: hda/realtek: Enable 4-speaker output for Dell XPS 15 9510 laptop ALSA: oxfw: fix functioal regression for silence in Apogee Duet FireWire ALSA: hda - fix the 'Capture Switch' value change notifications
2021-08-18Merge tag 'cfi-v5.14-rc7' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull clang cfi fix from Kees Cook: - Use rcu_read_{un}lock_sched_notrace to avoid recursion (Elliot Berman) * tag 'cfi-v5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: cfi: Use rcu_read_{un}lock_sched_notrace
2021-08-18pipe: avoid unnecessary EPOLLET wakeups under normal loadsLinus Torvalds2-6/+11
I had forgotten just how sensitive hackbench is to extra pipe wakeups, and commit 3a34b13a88ca ("pipe: make pipe writes always wake up readers") ended up causing a quite noticeable regression on larger machines. Now, hackbench isn't necessarily a hugely meaningful benchmark, and it's not clear that this matters in real life all that much, but as Mel points out, it's used often enough when comparing kernels and so the performance regression shows up like a sore thumb. It's easy enough to fix at least for the common cases where pipes are used purely for data transfer, and you never have any exciting poll usage at all. So set a special 'poll_usage' flag when there is polling activity, and make the ugly "EPOLLET has crazy legacy expectations" semantics explicit to only that case. I would love to limit it to just the broken EPOLLET case, but the pipe code can't see the difference between epoll and regular select/poll, so any non-read/write waiting will trigger the extra wakeup behavior. That is sufficient for at least the hackbench case. Apart from making the odd extra wakeup cases more explicitly about EPOLLET, this also makes the extra wakeup be at the _end_ of the pipe write, not at the first write chunk. That is actually much saner semantics (as much as you can call any of the legacy edge-triggered expectations for EPOLLET "sane") since it means that you know the wakeup will happen once the write is done, rather than possibly in the middle of one. [ For stable people: I'm putting a "Fixes" tag on this, but I leave it up to you to decide whether you actually want to backport it or not. It likely has no impact outside of synthetic benchmarks - Linus ] Link: https://lore.kernel.org/lkml/20210802024945.GA8372@xsang-OptiPlex-9020/ Fixes: 3a34b13a88ca ("pipe: make pipe writes always wake up readers") Reported-by: kernel test robot <oliver.sang@intel.com> Tested-by: Sandeep Patil <sspatil@android.com> Tested-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-08-18platform/x86: gigabyte-wmi: add support for B450M S2H V2Thomas Weißschuh1-0/+1
Reported as working here: https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-901207693 Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20210818164435.99821-1-linux@weissschuh.net Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-08-18net: asix: fix uninit value bugsPavel Skripkin1-40/+30
Syzbot reported uninit-value in asix_mdio_read(). The problem was in missing error handling. asix_read_cmd() should initialize passed stack variable smsr, but it can fail in some cases. Then while condidition checks possibly uninit smsr variable. Since smsr is uninitialized stack variable, driver can misbehave, because smsr will be random in case of asix_read_cmd() failure. Fix it by adding error handling and just continue the loop instead of checking uninit value. Added helper function for checking Host_En bit, since wrong loop was used in 4 functions and there is no need in copy-pasting code parts. Cc: Robert Foss <robert.foss@collabora.com> Fixes: d9fe64e51114 ("net: asix: Add in_pm parameter") Reported-by: syzbot+a631ec9e717fb0423053@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-18ovs: clear skb->tstamp in forwarding pathkaixi.fan1-0/+1
fq qdisc requires tstamp to be cleared in the forwarding path. Now ovs doesn't clear skb->tstamp. We encountered a problem with linux version 5.4.56 and ovs version 2.14.1, and packets failed to dequeue from qdisc when fq qdisc was attached to ovs port. Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC") Signed-off-by: kaixi.fan <fankaixi.li@bytedance.com> Signed-off-by: xiexiaohui <xiexiaohui.xxh@bytedance.com> Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-18Merge branch 'mdio-fixes'David S. Miller1-13/+24
Saravana Kannan says: ==================== Clean up and fix error handling in mdio_mux_init() This patch series was started due to -EPROBE_DEFER not being handled correctly in mdio_mux_init() and causing issues [1]. While at it, I also did some more error handling fixes and clean ups. The -EPROBE_DEFER fix is the last patch. Ideally, in the last patch we'd treat any error similar to -EPROBE_DEFER but I'm not sure if it'll break any board/platforms where some child mdiobus never successfully registers. If we treated all errors similar to -EPROBE_DEFER, then none of the child mdiobus will work and that might be a regression. If people are sure this is not a real case, then I can fix up the last patch to always fail the entire mdio-mux init if any of the child mdiobus registration fails. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-18net: mdio-mux: Handle -EPROBE_DEFER correctlySaravana Kannan1-2/+6
When registering mdiobus children, if we get an -EPROBE_DEFER, we shouldn't ignore it and continue registering the rest of the mdiobus children. This would permanently prevent the deferring child mdiobus from working instead of reattempting it in the future. So, if a child mdiobus needs to be reattempted in the future, defer the entire mdio-mux initialization. This fixes the issue where PHYs sitting under the mdio-mux aren't initialized correctly if the PHY's interrupt controller is not yet ready when the mdio-mux is being probed. Additional context in the link below. Fixes: 0ca2997d1452 ("netdev/of/phy: Add MDIO bus multiplexer support.") Link: https://lore.kernel.org/lkml/CAGETcx95kHrv8wA-O+-JtfH7H9biJEGJtijuPVN0V5dUKUAB3A@mail.gmail.com/#t Signed-off-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Marc Zyngier <maz@kernel.org> Tested-by: Marc Zyngier <maz@kernel.org> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-18net: mdio-mux: Don't ignore memory allocation errorsSaravana Kannan1-10/+18
If we are seeing memory allocation errors, don't try to continue registering child mdiobus devices. It's unlikely they'll succeed. Fixes: 342fa1964439 ("mdio: mux: make child bus walking more permissive and errors more verbose") Signed-off-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Marc Zyngier <maz@kernel.org> Tested-by: Marc Zyngier <maz@kernel.org> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-18net: mdio-mux: Delete unnecessary devm_kfreeSaravana Kannan1-1/+0
The whole point of devm_* APIs is that you don't have to undo them if you are returning an error that's going to get propagated out of a probe() function. So delete unnecessary devm_kfree() call in the error return path. Fixes: b60161668199 ("mdio: mux: Correct mdio_mux_init error path issues") Signed-off-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Marc Zyngier <maz@kernel.org> Tested-by: Marc Zyngier <maz@kernel.org> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-18net: dsa: sja1105: fix use-after-free after calling of_find_compatible_node, ↵Vladimir Oltean1-4/+2
or worse It seems that of_find_compatible_node has a weird calling convention in which it calls of_node_put() on the "from" node argument, instead of leaving that up to the caller. This comes from the fact that of_find_compatible_node with a non-NULL "from" argument it only supposed to be used as the iterator function of for_each_compatible_node(). OF iterator functions call of_node_get on the next OF node and of_node_put() on the previous one. When of_find_compatible_node calls of_node_put, it actually never expects the refcount to drop to zero, because the call is done under the atomic devtree_lock context, and when the refcount drops to zero it triggers a kobject and a sysfs file deletion, which assume blocking context. So any driver call to of_find_compatible_node is probably buggy because an unexpected of_node_put() takes place. What should be done is to use the of_get_compatible_child() function. Fixes: 5a8f09748ee7 ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX") Link: https://lore.kernel.org/netdev/20210814010139.kzryimmp4rizlznt@skbuf/ Suggested-by: Frank Rowand <frowand.list@gmail.com> Suggested-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-18sch_cake: fix srchost/dsthost hashing modeToke Høiland-Jørgensen1-1/+1
When adding support for using the skb->hash value as the flow hash in CAKE, I accidentally introduced a logic error that broke the host-only isolation modes of CAKE (srchost and dsthost keywords). Specifically, the flow_hash variable should stay initialised to 0 in cake_hash() in pure host-based hashing mode. Add a check for this before using the skb->hash value as flow_hash. Fixes: b0c19ed6088a ("sch_cake: Take advantage of skb->hash where appropriate") Reported-by: Pete Heist <pete@heistp.net> Tested-by: Pete Heist <pete@heistp.net> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-18platform/x86: gigabyte-wmi: add support for X570 GAMING XThomas Weißschuh1-0/+1
Reported as working here: https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-900263115 Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20210817154628.84992-1-linux@weissschuh.net Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-08-17ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error pathWang Hai1-1/+4
In ixgbe_xsk_pool_enable(), if ixgbe_xsk_wakeup() fails, We should restore the previous state and clean up the resources. Add the missing clear af_xdp_zc_qps and unmap dma to fix this bug. Fixes: d49e286d354e ("ixgbe: add tracking of AF_XDP zero-copy state for each queue pair") Fixes: 4a9b32f30f80 ("ixgbe: fix potential RX buffer starvation for AF_XDP") Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20210817203736.3529939-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-17Merge tag 'wireless-drivers-2021-08-17' of ↵Jakub Kicinski6-14/+91
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.14 First set of fixes for v5.14 and nothing major this time. New devices for iwlwifi and one fix for a compiler warning. iwlwifi * support for new devices mt76 * fix compiler warning about MT_CIPHER_NONE * tag 'wireless-drivers-2021-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers: mt76: fix enum type mismatch iwlwifi: add new so-jf devices iwlwifi: add new SoF with JF devices iwlwifi: pnvm: accept multiple HW-type TLVs ==================== Link: https://lore.kernel.org/r/20210817171027.EC1E6C43460@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-17Merge tag 'trace-v5.14-rc6' of ↵Linus Torvalds2-35/+15
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Limit the shooting in the foot of tp_printk The "tp_printk" option redirects the trace event output to printk at boot up. This is useful when a machine crashes before boot where the trace events can not be retrieved by the in kernel ring buffer. But it can be "dangerous" because trace events can be located in high frequency locations such as interrupts and the scheduler, where a printk can slow it down that it live locks the machine (because by the time the printk finishes, the next event is triggered). Thus tp_printk must be used with care. It was discovered that the filter logic to trace events does not apply to the tp_printk events. This can cause a surprise and live lock when the user expects it to be filtered to limit the amount of events printed to the console when in fact it still prints everything" * tag 'trace-v5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Apply trace filters on all output channels
2021-08-17net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32Dinghao Liu1-1/+3
qlcnic_83xx_unlock_flash() is called on all paths after we call qlcnic_83xx_lock_flash(), except for one error path on failure of QLCRD32(), which may cause a deadlock. This bug is suggested by a static analysis tool, please advise. Fixes: 81d0aeb0a4fff ("qlcnic: flash template based firmware reset recovery") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20210816131405.24024-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-17mac80211: fix locking in ieee80211_restart_work()Johannes Berg1-0/+2
Ilan's change to move locking around accidentally lost the wiphy_lock() during some porting, add it back. Fixes: 45daaa131841 ("mac80211: Properly WARN on HW scan before restart") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20210817121210.47bdb177064f.Ib1ef79440cd27f318c028ddfc0c642406917f512@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-17virtio-net: use NETIF_F_GRO_HW instead of NETIF_F_LROJason Wang1-7/+7
Commit a02e8964eaf92 ("virtio-net: ethtool configurable LRO") maps LRO to virtio guest offloading features and allows the administrator to enable and disable those features via ethtool. This leads to several issues: - For a device that doesn't support control guest offloads, the "LRO" can't be disabled triggering WARN in dev_disable_lro() when turning off LRO or when enabling forwarding bridging etc. - For a device that supports control guest offloads, the guest offloads are disabled in cases of bridging, forwarding etc slowing down the traffic. Fix this by using NETIF_F_GRO_HW instead. Though the spec does not guarantee packets to be re-segmented as the original ones, we can add that to the spec, possibly with a flag for devices to differentiate between GRO and LRO. Further, we never advertised LRO historically before a02e8964eaf92 ("virtio-net: ethtool configurable LRO") and so bridged/forwarded configs effectively always relied on virtio receive offloads behaving like GRO - thus even if this breaks any configs it is at least not a regression. Fixes: a02e8964eaf92 ("virtio-net: ethtool configurable LRO") Acked-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: Ivan <ivan@prestigetransportation.com> Tested-by: Ivan <ivan@prestigetransportation.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-17ALSA: hda/via: Apply runtime PM workaround for ASUS B23ETakashi Iwai1-0/+1
ASUS B23E requires the same workaround like other machines with VT1802, otherwise it looses the codec power on a few nodes and the sound kept silence. Fixes: a0645daf1610 ("ALSA: HDA: Early Forbid of runtime PM") Link: https://lore.kernel.org/r/ac2232f142efcd67fe6ac38897f704f7176bd200.camel@gmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210817052432.14751-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-17ALSA: hda: Fix hang during shutdown due to link resetImre Deak1-3/+9
During system shutdown codecs may be still active, and resetting the controller->codec HW link in this state - based on the bug reporter's tests - leads to the shutdown sequence to get stuck. This happens at least on the reporter's KBL system with an ALC662 codec. For now fix the issue by skipping the link reset step. Fixes: 472e18f63c42 ("ALSA: hda: Release controller display power during shutdown/reboot") References: https://bugzilla.kernel.org/show_bug.cgi?id=214045 References: https://gitlab.freedesktop.org/drm/intel/-/issues/3618#note_1024665 Reported-and-tested-by: youling257@gmail.com Cc: youling257@gmail.com Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20210816174259.2759103-1-imre.deak@intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-16Merge branch 'linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This contains a fix for a potential boot failure due to a missing Kconfig dependency for people upgrading with the DRBG enabled" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: drbg - select SHA512
2021-08-16vrf: Reset skb conntrack connection on VRF rcvLahav Schlesinger1-0/+4
To fix the "reverse-NAT" for replies. When a packet is sent over a VRF, the POST_ROUTING hooks are called twice: Once from the VRF interface, and once from the "actual" interface the packet will be sent from: 1) First SNAT: l3mdev_l3_out() -> vrf_l3_out() -> .. -> vrf_output_direct() This causes the POST_ROUTING hooks to run. 2) Second SNAT: 'ip_output()' calls POST_ROUTING hooks again. Similarly for replies, first ip_rcv() calls PRE_ROUTING hooks, and second vrf_l3_rcv() calls them again. As an example, consider the following SNAT rule: > iptables -t nat -A POSTROUTING -p udp -m udp --dport 53 -j SNAT --to-source 2.2.2.2 -o vrf_1 In this case sending over a VRF will create 2 conntrack entries. The first is from the VRF interface, which performs the IP SNAT. The second will run the SNAT, but since the "expected reply" will remain the same, conntrack randomizes the source port of the packet: e..g With a socket bound to 1.1.1.1:10000, sending to 3.3.3.3:53, the conntrack rules are: udp 17 29 src=2.2.2.2 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 [UNREPLIED] src=3.3.3.3 dst=2.2.2.2 sport=53 dport=61033 packets=0 bytes=0 mark=0 use=1 udp 17 29 src=1.1.1.1 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 [UNREPLIED] src=3.3.3.3 dst=2.2.2.2 sport=53 dport=10000 packets=0 bytes=0 mark=0 use=1 i.e. First SNAT IP from 1.1.1.1 --> 2.2.2.2, and second the src port is SNAT-ed from 10000 --> 61033. But when a reply is sent (3.3.3.3:53 -> 2.2.2.2:61033) only the later conntrack entry is matched: udp 17 29 src=2.2.2.2 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 src=3.3.3.3 dst=2.2.2.2 sport=53 dport=61033 packets=1 bytes=49 mark=0 use=1 udp 17 28 src=1.1.1.1 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 [UNREPLIED] src=3.3.3.3 dst=2.2.2.2 sport=53 dport=10000 packets=0 bytes=0 mark=0 use=1 And a "port 61033 unreachable" ICMP packet is sent back. The issue is that when PRE_ROUTING hooks are called from vrf_l3_rcv(), the skb already has a conntrack flow attached to it, which means nf_conntrack_in() will not resolve the flow again. This means only the dest port is "reverse-NATed" (61033 -> 10000) but the dest IP remains 2.2.2.2, and since the socket is bound to 1.1.1.1 it's not received. This can be verified by logging the 4-tuple of the packet in '__udp4_lib_rcv()'. The fix is then to reset the flow when skb is received on a VRF, to let conntrack resolve the flow again (which now will hit the earlier flow). To reproduce: (Without the fix "Got pkt_to_nat_port" will not be printed by running 'bash ./repro'): $ cat run_in_A1.py import logging logging.getLogger("scapy.runtime").setLevel(logging.ERROR) from scapy.all import * import argparse def get_packet_to_send(udp_dst_port, msg_name): return Ether(src='11:22:33:44:55:66', dst=iface_mac)/ \ IP(src='3.3.3.3', dst='2.2.2.2')/ \ UDP(sport=53, dport=udp_dst_port)/ \ Raw(f'{msg_name}\x0012345678901234567890') parser = argparse.ArgumentParser() parser.add_argument('-iface_mac', dest="iface_mac", type=str, required=True, help="From run_in_A3.py") parser.add_argument('-socket_port', dest="socket_port", type=str, required=True, help="From run_in_A3.py") parser.add_argument('-v1_mac', dest="v1_mac", type=str, required=True, help="From script") args, _ = parser.parse_known_args() iface_mac = args.iface_mac socket_port = int(args.socket_port) v1_mac = args.v1_mac print(f'Source port before NAT: {socket_port}') while True: pkts = sniff(iface='_v0', store=True, count=1, timeout=10) if 0 == len(pkts): print('Something failed, rerun the script :(', flush=True) break pkt = pkts[0] if not pkt.haslayer('UDP'): continue pkt_sport = pkt.getlayer('UDP').sport print(f'Source port after NAT: {pkt_sport}', flush=True) pkt_to_send = get_packet_to_send(pkt_sport, 'pkt_to_nat_port') sendp(pkt_to_send, '_v0', verbose=False) # Will not be received pkt_to_send = get_packet_to_send(socket_port, 'pkt_to_socket_port') sendp(pkt_to_send, '_v0', verbose=False) break $ cat run_in_A2.py import socket import netifaces print(f"{netifaces.ifaddresses('e00000')[netifaces.AF_LINK][0]['addr']}", flush=True) s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) s.setsockopt(socket.SOL_SOCKET, socket.SO_BINDTODEVICE, str('vrf_1' + '\0').encode('utf-8')) s.connect(('3.3.3.3', 53)) print(f'{s. getsockname()[1]}', flush=True) s.settimeout(5) while True: try: # Periodically send in order to keep the conntrack entry alive. s.send(b'a'*40) resp = s.recvfrom(1024) msg_name = resp[0].decode('utf-8').split('\0')[0] print(f"Got {msg_name}", flush=True) except Exception as e: pass $ cat repro.sh ip netns del A1 2> /dev/null ip netns del A2 2> /dev/null ip netns add A1 ip netns add A2 ip -n A1 link add _v0 type veth peer name _v1 netns A2 ip -n A1 link set _v0 up ip -n A2 link add e00000 type bond ip -n A2 link add lo0 type dummy ip -n A2 link add vrf_1 type vrf table 10001 ip -n A2 link set vrf_1 up ip -n A2 link set e00000 master vrf_1 ip -n A2 addr add 1.1.1.1/24 dev e00000 ip -n A2 link set e00000 up ip -n A2 link set _v1 master e00000 ip -n A2 link set _v1 up ip -n A2 link set lo0 up ip -n A2 addr add 2.2.2.2/32 dev lo0 ip -n A2 neigh add 1.1.1.10 lladdr 77:77:77:77:77:77 dev e00000 ip -n A2 route add 3.3.3.3/32 via 1.1.1.10 dev e00000 table 10001 ip netns exec A2 iptables -t nat -A POSTROUTING -p udp -m udp --dport 53 -j \ SNAT --to-source 2.2.2.2 -o vrf_1 sleep 5 ip netns exec A2 python3 run_in_A2.py > x & XPID=$! sleep 5 IFACE_MAC=`sed -n 1p x` SOCKET_PORT=`sed -n 2p x` V1_MAC=`ip -n A2 link show _v1 | sed -n 2p | awk '{print $2'}` ip netns exec A1 python3 run_in_A1.py -iface_mac ${IFACE_MAC} -socket_port \ ${SOCKET_PORT} -v1_mac ${SOCKET_PORT} sleep 5 kill -9 $XPID wait $XPID 2> /dev/null ip netns del A1 ip netns del A2 tail x -n 2 rm x set +x Fixes: 73e20b761acf ("net: vrf: Add support for PREROUTING rules on vrf device") Signed-off-by: Lahav Schlesinger <lschlesinger@drivenets.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20210815120002.2787653-1-lschlesinger@drivenets.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-16Merge tag 'mtd/fixes-for-5.14-rc7' of ↵Linus Torvalds5-13/+19
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: "MTD core fixes: - Fix lock hierarchy in deregister_mtd_blktrans - Handle flashes without OTP gracefully - Break circular locks in register_mtd_blktrans MTD device fixes: - mchp48l640: - Fix memory leak on cmd - Silence some uninitialized variable warnings - blkdevs: - Initialize rq.limits.discard_granularity CFI fixes: - Fix crash when erasing/writing AMD cards Raw NAND fixes: - Fix of_get_nand_secure_regions(): - Add a missing check - Avoid an unwanted probe failure when a DT property is missing" * tag 'mtd/fixes-for-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: Fix probe failure due to of_get_nand_secure_regions() mtd: fix lock hierarchy in deregister_mtd_blktrans mtd: devices: mchp48l640: Fix memory leak on cmd mtd: cfi_cmdset_0002: fix crash when erasing/writing AMD cards mtd: core: handle flashes without OTP gracefully mtd: mchp48l640: silence some uninitialized variable warnings mtd: break circular locks in register_mtd_blktrans mtd: rawnand: Add a check in of_get_nand_secure_regions() mtd: mtd_blkdevs: Initialize rq.limits.discard_granularity
2021-08-16Merge tag 'trace-v5.14-rc5-2' of ↵Linus Torvalds4-3/+69
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Fixes and clean ups to tracing: - Fix header alignment when PREEMPT_RT is enabled for osnoise tracer - Inject "stop" event to see where osnoise stopped the trace - Define DYNAMIC_FTRACE_WITH_ARGS as some code had an #ifdef for it - Fix erroneous message for bootconfig cmdline parameter - Fix crash caused by not found variable in histograms" * tag 'trace-v5.14-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing / histogram: Fix NULL pointer dereference on strcmp() on NULL event name init: Suppress wrong warning for bootconfig cmdline parameter tracing: define needed config DYNAMIC_FTRACE_WITH_ARGS trace/osnoise: Print a stop tracing message trace/timerlat: Add a header with PREEMPT_RT additional fields trace/osnoise: Add a header with PREEMPT_RT additional fields
2021-08-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-7/+17
Pull KVM fixes from Paolo Bonzini: "Two nested virtualization fixes for AMD processors" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nSVM: always intercept VMLOAD/VMSAVE when nested (CVE-2021-3656) KVM: nSVM: avoid picking up unsupported bits from L2 in int_ctl (CVE-2021-3653)
2021-08-16Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds20-36/+166
Pull virtio fixes from Michael Tsirkin: "Fixes in virtio, vhost, and vdpa drivers" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/mlx5: Fix queue type selection logic vdpa/mlx5: Avoid destroying MR on empty iotlb tools/virtio: fix build virtio_ring: pull in spinlock header vringh: pull in spinlock header virtio-blk: Add validation for block size in config space vringh: Use wiov->used to check for read/write desc order virtio_vdpa: reject invalid vq indices vdpa: Add documentation for vdpa_alloc_device() macro vDPA/ifcvf: Fix return value check for vdpa_alloc_device() vp_vdpa: Fix return value check for vdpa_alloc_device() vdpa_sim: Fix return value check for vdpa_alloc_device() vhost: Fix the calculation in vhost_overflow() vhost-vdpa: Fix integer overflow in vhost_vdpa_process_iotlb_update() virtio_pci: Support surprise removal of virtio pci device virtio: Protect vqs list access virtio: Keep vring_del_virtqueue() mirror of VQ create virtio: Improve vq->broken access to avoid any compiler optimization
2021-08-16tracing: Apply trace filters on all output channelsPingfan Liu2-35/+15
The event filters are not applied on all of the output, which results in the flood of printk when using tp_printk. Unfolding event_trigger_unlock_commit_regs() into trace_event_buffer_commit(), so the filters can be applied on every output. Link: https://lkml.kernel.org/r/20210814034538.8428-1-kernelfans@gmail.com Cc: stable@vger.kernel.org Fixes: 0daa2302968c1 ("tracing: Add tp_printk cmdline to have tracepoints go to printk()") Signed-off-by: Pingfan Liu <kernelfans@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-19 17:52:15 +0000