summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2020-06-25netfilter: iptables: Split ipt_unregister_table() into pre_exit and exit ↵David Wilder2-1/+20
helpers. The pre_exit will un-register the underlying hook and .exit will do the table freeing. The netns core does an unconditional synchronize_rcu after the pre_exit hooks insuring no packets are in flight that have picked up the pointer before completing the un-register. Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default") Signed-off-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-06-25netfilter: Add MODULE_DESCRIPTION entries to kernel modulesRob Gill41-0/+41
The user tool modinfo is used to get information on kernel modules, including a description where it is available. This patch adds a brief MODULE_DESCRIPTION to netfilter kernel modules (descriptions taken from Kconfig file or code comments) Signed-off-by: Rob Gill <rrobgill@protonmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-06-25netfilter: ipset: fix unaligned atomic accessRussell King1-0/+2
When using ip_set with counters and comment, traffic causes the kernel to panic on 32-bit ARM: Alignment trap: not handling instruction e1b82f9f at [<bf01b0dc>] Unhandled fault: alignment exception (0x221) at 0xea08133c PC is at ip_set_match_extensions+0xe0/0x224 [ip_set] The problem occurs when we try to update the 64-bit counters - the faulting address above is not 64-bit aligned. The problem occurs due to the way elements are allocated, for example: set->dsize = ip_set_elem_len(set, tb, 0, 0); map = ip_set_alloc(sizeof(*map) + elements * set->dsize); If the element has a requirement for a member to be 64-bit aligned, and set->dsize is not a multiple of 8, but is a multiple of four, then every odd numbered elements will be misaligned - and hitting an atomic64_add() on that element will cause the kernel to panic. ip_set_elem_len() must return a size that is rounded to the maximum alignment of any extension field stored in the element. This change ensures that is the case. Fixes: 95ad1f4a9358 ("netfilter: ipset: Fix extension alignment") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-06-20net: Add MODULE_DESCRIPTION entries to network modulesRob Gill10-0/+10
The user tool modinfo is used to get information on kernel modules, including a description where it is available. This patch adds a brief MODULE_DESCRIPTION to the following modules: 9p drop_monitor esp4_offload esp6_offload fou fou6 ila sch_fq sch_fq_codel sch_hhf Signed-off-by: Rob Gill <rrobgill@protonmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20rxrpc: Fix notification call on completion of discarded callsDavid Howells1-0/+7
When preallocated service calls are being discarded, they're passed to ->discard_new_call() to have the caller clean up any attached higher-layer preallocated pieces before being marked completed. However, the act of marking them completed now invokes the call's notification function - which causes a problem because that function might assume that the previously freed pieces of memory are still there. Fix this by setting a dummy notification function on the socket after calling ->discard_new_call(). This results in the following kasan message when the kafs module is removed. ================================================================== BUG: KASAN: use-after-free in afs_wake_up_async_call+0x6aa/0x770 fs/afs/rxrpc.c:707 Write of size 1 at addr ffff8880946c39e4 by task kworker/u4:1/21 CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.8.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x18f/0x20d lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 afs_wake_up_async_call+0x6aa/0x770 fs/afs/rxrpc.c:707 rxrpc_notify_socket+0x1db/0x5d0 net/rxrpc/recvmsg.c:40 __rxrpc_set_call_completion.part.0+0x172/0x410 net/rxrpc/recvmsg.c:76 __rxrpc_call_completed net/rxrpc/recvmsg.c:112 [inline] rxrpc_call_completed+0xca/0xf0 net/rxrpc/recvmsg.c:111 rxrpc_discard_prealloc+0x781/0xab0 net/rxrpc/call_accept.c:233 rxrpc_listen+0x147/0x360 net/rxrpc/af_rxrpc.c:245 afs_close_socket+0x95/0x320 fs/afs/rxrpc.c:110 afs_net_exit+0x1bc/0x310 fs/afs/main.c:155 ops_exit_list.isra.0+0xa8/0x150 net/core/net_namespace.c:186 cleanup_net+0x511/0xa50 net/core/net_namespace.c:603 process_one_work+0x965/0x1690 kernel/workqueue.c:2269 worker_thread+0x96/0xe10 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:291 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 Allocated by task 6820: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:467 kmem_cache_alloc_trace+0x153/0x7d0 mm/slab.c:3551 kmalloc include/linux/slab.h:555 [inline] kzalloc include/linux/slab.h:669 [inline] afs_alloc_call+0x55/0x630 fs/afs/rxrpc.c:141 afs_charge_preallocation+0xe9/0x2d0 fs/afs/rxrpc.c:757 afs_open_socket+0x292/0x360 fs/afs/rxrpc.c:92 afs_net_init+0xa6c/0xe30 fs/afs/main.c:125 ops_init+0xaf/0x420 net/core/net_namespace.c:151 setup_net+0x2de/0x860 net/core/net_namespace.c:341 copy_net_ns+0x293/0x590 net/core/net_namespace.c:482 create_new_namespaces+0x3fb/0xb30 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xbd/0x1f0 kernel/nsproxy.c:231 ksys_unshare+0x43d/0x8e0 kernel/fork.c:2983 __do_sys_unshare kernel/fork.c:3051 [inline] __se_sys_unshare kernel/fork.c:3049 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3049 do_syscall_64+0x60/0xe0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 21: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0xf7/0x140 mm/kasan/common.c:455 __cache_free mm/slab.c:3426 [inline] kfree+0x109/0x2b0 mm/slab.c:3757 afs_put_call+0x585/0xa40 fs/afs/rxrpc.c:190 rxrpc_discard_prealloc+0x764/0xab0 net/rxrpc/call_accept.c:230 rxrpc_listen+0x147/0x360 net/rxrpc/af_rxrpc.c:245 afs_close_socket+0x95/0x320 fs/afs/rxrpc.c:110 afs_net_exit+0x1bc/0x310 fs/afs/main.c:155 ops_exit_list.isra.0+0xa8/0x150 net/core/net_namespace.c:186 cleanup_net+0x511/0xa50 net/core/net_namespace.c:603 process_one_work+0x965/0x1690 kernel/workqueue.c:2269 worker_thread+0x96/0xe10 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:291 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 The buggy address belongs to the object at ffff8880946c3800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 484 bytes inside of 1024-byte region [ffff8880946c3800, ffff8880946c3c00) The buggy address belongs to the page: page:ffffea000251b0c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0002546508 ffffea00024fa248 ffff8880aa000c40 raw: 0000000000000000 ffff8880946c3000 0000000100000002 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880946c3880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880946c3900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880946c3980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880946c3a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880946c3a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Reported-by: syzbot+d3eccef36ddbd02713e9@syzkaller.appspotmail.com Fixes: 5ac0d62226a0 ("rxrpc: Fix missing notification") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20Merge tag 'ieee802154-for-davem-2020-06-19' of ↵David S. Miller2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2020-06-19 An update from ieee802154 for your *net* tree. Just two small maintenance fixes to update references to the new project homepage. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20tc-testing: update geneve options match in tunnel_key unit testsHangbin Liu1-7/+7
Since iproute2 commit f72c3ad00f3b ("tc: m_tunnel_key: add options support for vxlan"), the geneve opt output use key word "geneve_opts" instead of "geneve_opt". To make compatibility for both old and new iproute2, let's accept both "geneve_opt" and "geneve_opts". Suggested-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Tested-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20r8169: fix firmware not resetting tp->ocp_baseHeiner Kallweit1-1/+4
Typically the firmware takes care that tp->ocp_base is reset to its default value. That's not the case (at least) for RTL8117. As a result subsequent PHY access reads/writes the wrong page and the link is broken. Fix this be resetting tp->ocp_base explicitly. Fixes: 229c1e0dfd3d ("r8169: load firmware for RTL8168fp/RTL8117") Reported-by: Aaron Ma <mapengyu@gmail.com> Tested-by: Aaron Ma <mapengyu@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20ibmvnic: continue to init in CRQ reset returns H_CLOSEDDany Madden1-2/+7
Continue the reset path when partner adapter is not ready or H_CLOSED is returned from reset crq. This patch allows the CRQ init to proceed to establish a valid CRQ for traffic to flow after reset. Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20ionic: tame the watchdog timer on reconfigShannon Nelson1-7/+8
Even with moving netif_tx_disable() to an earlier point when taking down the queues for a reconfiguration, we still end up with the occasional netdev watchdog Tx Timeout complaint. The old method of using netif_trans_update() works fine for queue 0, but has no effect on the remaining queues. Using netif_device_detach() allows us to signal to the watchdog to ignore us for the moment. Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19selftests/net: report etf errors correctlyWillem de Bruijn1-7/+26
The ETF qdisc can queue skbs that it could not pace on the errqueue. Address a few issues in the selftest - recv buffer size was too small, and incorrectly calculated - compared errno to ee_code instead of ee_errno - missed invalid request error type v2: - fix a few checkpatch --strict indentation warnings Fixes: ea6a547669b3 ("selftests/net: make so_txtime more robust to timer variance") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19ibmveth: Fix max MTU limitThomas Falcon1-1/+1
The max MTU limit defined for ibmveth is not accounting for virtual ethernet buffer overhead, which is twenty-two additional bytes set aside for the ethernet header and eight additional bytes of an opaque handle reserved for use by the hypervisor. Update the max MTU to reflect this overhead. Fixes: d894be57ca92 ("ethernet: use net core MTU range checking in more drivers") Fixes: 110447f8269a ("ethernet: fix min/max MTU typos") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19Merge branch 'several-fixes-for-indirect-flow_blocks-offload'David S. Miller10-63/+110
wenxu says: ==================== several fixes for indirect flow_blocks offload v2: patch2: store the cb_priv of representor to the flow_block_cb->indr.cb_priv in the driver. And make the correct check with the statments this->indr.cb_priv == cb_priv patch4: del the driver list only in the indriect cleanup callbacks v3: add the cover letter and changlogs. v4: collapsed 1/4, 2/4, 4/4 in v3 to one fix Add the prepare patch 1 and 2 v5: patch1: place flow_indr_block_cb_alloc() right before flow_indr_dev_setup_offload() to avoid moving flow_block_indr_init() This series fixes commit 1fac52da5942 ("net: flow_offload: consolidate indirect flow_block infrastructure") that revists the flow_block infrastructure. patch #1 #2: prepare for fix patch #3 add and use flow_indr_block_cb_alloc/remove function patch #3: fix flow_indr_dev_unregister path If the representor is removed, then identify the indirect flow_blocks that need to be removed by the release callback and the port representor structure. To identify the port representor structure, a new indr.cb_priv field needs to be introduced. The flow_block also needs to be removed from the driver list from the cleanup path patch#4 fix block->nooffloaddevcnt warning dmesg log. When a indr device add in offload success. The block->nooffloaddevcnt should be 0. After the representor go away. When the dir device go away the flow_block UNBIND operation with -EOPNOTSUPP which lead the warning demesg log. The block->nooffloaddevcnt should always count for indr block. even the indr block offload successful. The representor maybe gone away and the ingress qdisc can work in software mode. ==================== Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19net/sched: cls_api: fix nooffloaddevcnt warning dmesg logwenxu1-10/+14
The block->nooffloaddevcnt should always count for indr block. even the indr block offload successful. The representor maybe gone away and the ingress qdisc can work in software mode. block->nooffloaddevcnt warning with following dmesg log: [ 760.667058] ##################################################### [ 760.668186] ## TEST test-ecmp-add-vxlan-encap-disable-sriov.sh ## [ 760.669179] ##################################################### [ 761.780655] :test: Fedora 30 (Thirty) [ 761.783794] :test: Linux reg-r-vrt-018-180 5.7.0+ [ 761.822890] :test: NIC ens1f0 FW 16.26.6000 PCI 0000:81:00.0 DEVICE 0x1019 ConnectX-5 Ex [ 761.860244] mlx5_core 0000:81:00.0 ens1f0: Link up [ 761.880693] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f0: link becomes ready [ 762.059732] mlx5_core 0000:81:00.1 ens1f1: Link up [ 762.234341] :test: unbind vfs of ens1f0 [ 762.257825] :test: Change ens1f0 eswitch (0000:81:00.0) mode to switchdev [ 762.291363] :test: unbind vfs of ens1f1 [ 762.306914] :test: Change ens1f1 eswitch (0000:81:00.1) mode to switchdev [ 762.309237] mlx5_core 0000:81:00.1: E-Switch: Disable: mode(LEGACY), nvfs(2), active vports(3) [ 763.282598] mlx5_core 0000:81:00.1: E-Switch: Supported tc offload range - chains: 4294967294, prios: 4294967295 [ 763.362825] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0) [ 763.444465] mlx5_core 0000:81:00.1 ens1f1: renamed from eth0 [ 763.460088] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0) [ 763.502586] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0) [ 763.552429] ens1f1_0: renamed from eth0 [ 763.569569] mlx5_core 0000:81:00.1: E-Switch: Enable: mode(OFFLOADS), nvfs(2), active vports(3) [ 763.629694] ens1f1_1: renamed from eth1 [ 764.631552] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1_0: link becomes ready [ 764.670841] :test: unbind vfs of ens1f0 [ 764.681966] :test: unbind vfs of ens1f1 [ 764.726762] mlx5_core 0000:81:00.0 ens1f0: Link up [ 764.766511] mlx5_core 0000:81:00.1 ens1f1: Link up [ 764.797325] :test: Add multipath vxlan encap rule and disable sriov [ 764.798544] :test: config multipath route [ 764.812732] mlx5_core 0000:81:00.0: lag map port 1:2 port 2:2 [ 764.874556] mlx5_core 0000:81:00.0: modify lag map port 1:1 port 2:2 [ 765.603681] :test: OK [ 765.659048] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1_1: link becomes ready [ 765.675085] :test: verify rule in hw [ 765.694237] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f0: link becomes ready [ 765.711892] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1: link becomes ready [ 766.979230] :test: OK [ 768.125419] :test: OK [ 768.127519] :test: - disable sriov ens1f1 [ 768.131160] pci 0000:81:02.2: Removing from iommu group 75 [ 768.132646] pci 0000:81:02.3: Removing from iommu group 76 [ 769.179749] mlx5_core 0000:81:00.1: E-Switch: Disable: mode(OFFLOADS), nvfs(2), active vports(3) [ 769.455627] mlx5_core 0000:81:00.0: modify lag map port 1:1 port 2:1 [ 769.703990] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0) [ 769.988637] mlx5_core 0000:81:00.1 ens1f1: renamed from eth0 [ 769.990022] :test: - disable sriov ens1f0 [ 769.994922] pci 0000:81:00.2: Removing from iommu group 73 [ 769.997048] pci 0000:81:00.3: Removing from iommu group 74 [ 771.035813] mlx5_core 0000:81:00.0: E-Switch: Disable: mode(OFFLOADS), nvfs(2), active vports(3) [ 771.339091] ------------[ cut here ]------------ [ 771.340812] WARNING: CPU: 6 PID: 3448 at net/sched/cls_api.c:749 tcf_block_offload_unbind.isra.0+0x5c/0x60 [ 771.341728] Modules linked in: act_mirred act_tunnel_key cls_flower dummy vxlan ip6_udp_tunnel udp_tunnel sch_ingress nfsv3 nfs_acl nfs lockd grace fscache tun bridge stp llc sunrpc rdma_ucm rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp mlxfw act_ct nf_flow_table kvm_intel nf_nat kvm nf_conntrack irqbypass crct10dif_pclmul igb crc32_pclmul nf_defrag_ipv6 libcrc32c nf_defrag_ipv4 crc32c_intel ghash_clmulni_intel ptp ipmi_ssif intel_cstate pps_c ore ses intel_uncore mei_me iTCO_wdt joydev ipmi_si iTCO_vendor_support i2c_i801 enclosure mei ioatdma dca lpc_ich wmi ipmi_devintf pcspkr acpi_power_meter ipmi_msghandler acpi_pad ast i2c_algo_bit drm_vram_helper drm_kms_helper drm_ttm_helper ttm drm mpt3sas raid_class scsi_transport_sas [ 771.347818] CPU: 6 PID: 3448 Comm: test-ecmp-add-v Not tainted 5.7.0+ #1146 [ 771.348727] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 771.349646] RIP: 0010:tcf_block_offload_unbind.isra.0+0x5c/0x60 [ 771.350553] Code: 4a fd ff ff 83 f8 a1 74 0e 5b 4c 89 e7 5d 41 5c 41 5d e9 07 93 89 ff 8b 83 a0 00 00 00 8d 50 ff 89 93 a0 00 00 00 85 c0 75 df <0f> 0b eb db 0f 1f 44 00 00 41 57 41 56 41 55 41 89 cd 41 54 49 89 [ 771.352420] RSP: 0018:ffffb33144cd3b00 EFLAGS: 00010246 [ 771.353353] RAX: 0000000000000000 RBX: ffff8b37cf4b2800 RCX: 0000000000000000 [ 771.354294] RDX: 00000000ffffffff RSI: ffff8b3b9aad0000 RDI: ffffffff8d5c6e20 [ 771.355245] RBP: ffff8b37eb546948 R08: ffffffffc0b7a348 R09: ffff8b3b9aad0000 [ 771.356189] R10: 0000000000000001 R11: ffff8b3ba7a0a1c0 R12: ffff8b37cf4b2850 [ 771.357123] R13: ffff8b3b9aad0000 R14: ffff8b37cf4b2820 R15: ffff8b37cf4b2820 [ 771.358039] FS: 00007f8a19b6e740(0000) GS:ffff8b3befa00000(0000) knlGS:0000000000000000 [ 771.358965] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 771.359885] CR2: 00007f3afb91c1a0 CR3: 000000045133c004 CR4: 00000000001606e0 [ 771.360825] Call Trace: [ 771.361764] __tcf_block_put+0x84/0x150 [ 771.362712] ingress_destroy+0x1b/0x20 [sch_ingress] [ 771.363658] qdisc_destroy+0x3e/0xc0 [ 771.364594] dev_shutdown+0x7a/0xa5 [ 771.365522] rollback_registered_many+0x20d/0x530 [ 771.366458] ? netdev_upper_dev_unlink+0x15d/0x1c0 [ 771.367387] unregister_netdevice_many.part.0+0xf/0x70 [ 771.368310] vxlan_netdevice_event+0xa4/0x110 [vxlan] [ 771.369454] notifier_call_chain+0x4c/0x70 [ 771.370579] rollback_registered_many+0x2f5/0x530 [ 771.371719] rollback_registered+0x56/0x90 [ 771.372843] unregister_netdevice_queue+0x73/0xb0 [ 771.373982] unregister_netdev+0x18/0x20 [ 771.375168] mlx5e_vport_rep_unload+0x56/0xc0 [mlx5_core] [ 771.376327] esw_offloads_disable+0x81/0x90 [mlx5_core] [ 771.377512] mlx5_eswitch_disable_locked.cold+0xcb/0x1af [mlx5_core] [ 771.378679] mlx5_eswitch_disable+0x44/0x60 [mlx5_core] [ 771.379822] mlx5_device_disable_sriov+0xad/0xb0 [mlx5_core] [ 771.380968] mlx5_core_sriov_configure+0xc1/0xe0 [mlx5_core] [ 771.382087] sriov_numvfs_store+0xfc/0x130 [ 771.383195] kernfs_fop_write+0xce/0x1b0 [ 771.384302] vfs_write+0xb6/0x1a0 [ 771.385410] ksys_write+0x5f/0xe0 [ 771.386500] do_syscall_64+0x5b/0x1d0 [ 771.387569] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 0fdcf78d5973 ("net: use flow_indr_dev_setup_offload()") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19net: flow_offload: fix flow_indr_dev_unregister pathwenxu10-18/+27
If the representor is removed, then identify the indirect flow_blocks that need to be removed by the release callback and the port representor structure. To identify the port representor structure, a new indr.cb_priv field needs to be introduced. The flow_block also needs to be removed from the driver list from the cleanup path. Fixes: 1fac52da5942 ("net: flow_offload: consolidate indirect flow_block infrastructure") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19flow_offload: use flow_indr_block_cb_alloc/remove functionwenxu6-44/+44
Prepare fix the bug in the next patch. use flow_indr_block_cb_alloc/remove function and remove the __flow_block_indr_binding. Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19flow_offload: add flow_indr_block_cb_alloc/remove functionwenxu2-0/+34
Add flow_indr_block_cb_alloc/remove function for next fix patch. Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19geneve: allow changing DF behavior after creationSabrina Dubroca1-0/+1
Currently, trying to change the DF parameter of a geneve device does nothing: # ip -d link show geneve1 14: geneve1: <snip> link/ether <snip> geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 <snip> # ip link set geneve1 type geneve id 1 df unset # ip -d link show geneve1 14: geneve1: <snip> link/ether <snip> geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 <snip> We just need to update the value in geneve_changelink. Fixes: a025fb5f49ad ("geneve: Allow configuration of DF behaviour") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19enetc: Fix HW_VLAN_CTAG_TX|RX togglingClaudiu Manoil3-16/+34
VLAN tag insertion/extraction offload is correctly activated at probe time but deactivation of this feature (i.e. via ethtool) is broken. Toggling works only for Tx/Rx ring 0 of a PF, and is ignored for the other rings, including the VF rings. To fix this, the existing VLAN offload toggling code was extended to all the rings assigned to a netdevice, instead of the default ring 0 (likely a leftover from the early validation days of this feature). And the code was moved to the common set_features() function to fix toggling for the VF driver too. Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19net: macb: undo operations in case of failureClaudiu Beznea1-2/+4
Undo previously done operation in case macb_phylink_connect() fails. Since macb_reset_hw() is the 1st undo operation the napi_exit label was renamed to reset_hw. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19Merge tag 'rxrpc-fixes-20200618' of ↵David S. Miller3-6/+5
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Performance drop fix and other fixes Here are three fixes for rxrpc: (1) Fix a trace symbol mapping. It doesn't seem to let you map to "". (2) Fix the handling of the remote receive window size when it increases beyond the size we can support for our transmit window. (3) Fix a performance drop caused by retransmitted packets being accidentally marked as already ACK'd. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19Merge branch 'net-phy-MDIO-bus-scanning-fixes'David S. Miller2-4/+11
Florian Fainelli says: ==================== net: phy: MDIO bus scanning fixes This patch series fixes two problems with the current MDIO bus scanning logic which was identified while moving from 4.9 to 5.4 on devices that do rely on scanning the MDIO bus at runtime because they use pluggable cards. Changes in v2: - added comment explaining the special value of -ENODEV - added Andrew's Reviewed-by tag ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19net: phy: Check harder for errors in get_phy_id()Florian Fainelli1-2/+4
Commit 02a6efcab675 ("net: phy: allow scanning busses with missing phys") added a special condition to return -ENODEV in case -ENODEV or -EIO was returned from the first read of the MII_PHYSID1 register. In case the MDIO bus data line pull-up is not strong enough, the MDIO bus controller will not flag this as a read error. This can happen when a pluggable daughter card is not connected and weak internal pull-ups are used (since that is the only option, otherwise the pins are floating). The second read of MII_PHYSID2 will be correctly flagged an error though, but now we will return -EIO which will be treated as a hard error, thus preventing MDIO bus scanning loops to continue succesfully. Apply the same logic to both register reads, thus allowing the scanning logic to proceed. Fixes: 02a6efcab675 ("net: phy: allow scanning busses with missing phys") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19of: of_mdio: Correct loop scanning logicFlorian Fainelli1-2/+7
Commit 209c65b61d94 ("drivers/of/of_mdio.c:fix of_mdiobus_register()") introduced a break of the loop on the premise that a successful registration should exit the loop. The premise is correct but not to code, because rc && rc != -ENODEV is just a special error condition, that means we would exit the loop even with rc == -ENODEV which is absolutely not correct since this is the error code to indicate to the MDIO bus layer that scanning should continue. Fix this by explicitly checking for rc = 0 as the only valid condition to break out of the loop. Fixes: 209c65b61d94 ("drivers/of/of_mdio.c:fix of_mdiobus_register()") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19net: ethernet: oki-semi: pch_gbe: fix spelling mistakeFlavio Suligoi1-1/+1
Fix typo: "Triger" --> "Trigger" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19MAINTAINERS: update ieee802154 project website URLStefan Schmidt1-1/+1
Update URL to our new home. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2020-06-19docs: net: ieee802154: change link to new project URLStefan Schmidt1-2/+2
We finally came around to setup a new project website. Update the reference here. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2020-06-19net: ethernet: neterion: vxge: fix spelling mistakeFlavio Suligoi1-1/+1
Fix typo: "trigered" --> "triggered" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19Merge branch 'master' of ↵David S. Miller6-37/+64
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2020-06-19 1) Fix double ESP trailer insertion in IPsec crypto offload if netif_xmit_frozen_or_stopped is true. From Huy Nguyen. 2) Merge fixup for "remove output_finish indirection from xfrm_state_afinfo". From Stephen Rothwell. 3) Select CRYPTO_SEQIV for ESP as this is needed for GCM and several other encryption algorithms. Also modernize the crypto algorithm selections for ESP and AH, remove those that are maked as "MUST NOT" and add those that are marked as "MUST" be implemented in RFC 8221. From Eric Biggers. Please note the merge conflict between commit: a7f7f6248d97 ("treewide: replace '---help---' in Kconfig files with 'help'") from Linus' tree and commits: 7d4e39195925 ("esp, ah: consolidate the crypto algorithm selections") be01369859b8 ("esp, ah: modernize the crypto algorithm selections") from the ipsec tree. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19Merge branch '40GbE' of ↵David S. Miller6-24/+44
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2020-06-18 This series contains fixes to ixgbe, i40e and ice driver. Ciara fixes up the ixgbe, i40e and ice drivers to protect access when allocating and freeing the rings. In addition, made use of READ_ONCE when reading the rings prior to accessing the statistics pointer. Björn fixes a crash where the receive descriptor ring allocation was moved to a different function, which broke the ethtool set_ringparam() hook. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18i40e: fix crash when Rx descriptor count is changedBjörn Töpel1-0/+3
When the AF_XDP buffer allocator was introduced, the Rx SW ring "rx_bi" allocation was moved from i40e_setup_rx_descriptors() function, and was instead done in the i40e_configure_rx_ring() function. This broke the ethtool set_ringparam() hook for changing the Rx descriptor count, which was relying on i40e_setup_rx_descriptors() to handle the allocation. Fix this by adding an explicit i40e_alloc_rx_bi() call to i40e_set_ringparam(). Fixes: be1222b585fd ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-18ice: protect ring accesses with WRITE_ONCECiara Loftus2-5/+5
The READ_ONCE macro is used when reading rings prior to accessing the statistics pointer. The corresponding WRITE_ONCE usage when allocating and freeing the rings to ensure protected access was not in place. Introduce this. Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-18i40e: protect ring accesses with READ- and WRITE_ONCECiara Loftus1-10/+19
READ_ONCE should be used when reading rings prior to accessing the statistics pointer. Introduce this as well as the corresponding WRITE_ONCE usage when allocating and freeing the rings, to ensure protected access. Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-18ixgbe: protect ring accesses with READ- and WRITE_ONCECiara Loftus2-9/+17
READ_ONCE should be used when reading rings prior to accessing the statistics pointer. Introduce this as well as the corresponding WRITE_ONCE usage when allocating and freeing the rings, to ensure protected access. Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-18net: increment xmit_recursion level in dev_direct_xmit()Eric Dumazet2-1/+3
Back in commit f60e5990d9c1 ("ipv6: protect skb->sk accesses from recursive dereference inside the stack") Hannes added code so that IPv6 stack would not trust skb->sk for typical cases where packet goes through 'standard' xmit path (__dev_queue_xmit()) Alas af_packet had a dev_direct_xmit() path that was not dealing yet with xmit_recursion level. Also change sk_mc_loop() to dump a stack once only. Without this patch, syzbot was able to trigger : [1] [ 153.567378] WARNING: CPU: 7 PID: 11273 at net/core/sock.c:721 sk_mc_loop+0x51/0x70 [ 153.567378] Modules linked in: nfnetlink ip6table_raw ip6table_filter iptable_raw iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 nf_defrag_ipv6 iptable_filter macsec macvtap tap macvlan 8021q hsr wireguard libblake2s blake2s_x86_64 libblake2s_generic udp_tunnel ip6_udp_tunnel libchacha20poly1305 poly1305_x86_64 chacha_x86_64 libchacha curve25519_x86_64 libcurve25519_generic netdevsim batman_adv dummy team bridge stp llc w1_therm wire i2c_mux_pca954x i2c_mux cdc_acm ehci_pci ehci_hcd mlx4_en mlx4_ib ib_uverbs ib_core mlx4_core [ 153.567386] CPU: 7 PID: 11273 Comm: b159172088 Not tainted 5.8.0-smp-DEV #273 [ 153.567387] RIP: 0010:sk_mc_loop+0x51/0x70 [ 153.567388] Code: 66 83 f8 0a 75 24 0f b6 4f 12 b8 01 00 00 00 31 d2 d3 e0 a9 bf ef ff ff 74 07 48 8b 97 f0 02 00 00 0f b6 42 3a 83 e0 01 5d c3 <0f> 0b b8 01 00 00 00 5d c3 0f b6 87 18 03 00 00 5d c0 e8 04 83 e0 [ 153.567388] RSP: 0018:ffff95c69bb93990 EFLAGS: 00010212 [ 153.567388] RAX: 0000000000000011 RBX: ffff95c6e0ee3e00 RCX: 0000000000000007 [ 153.567389] RDX: ffff95c69ae50000 RSI: ffff95c6c30c3000 RDI: ffff95c6c30c3000 [ 153.567389] RBP: ffff95c69bb93990 R08: ffff95c69a77f000 R09: 0000000000000008 [ 153.567389] R10: 0000000000000040 R11: 00003e0e00026128 R12: ffff95c6c30c3000 [ 153.567390] R13: ffff95c6cc4fd500 R14: ffff95c6f84500c0 R15: ffff95c69aa13c00 [ 153.567390] FS: 00007fdc3a283700(0000) GS:ffff95c6ff9c0000(0000) knlGS:0000000000000000 [ 153.567390] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 153.567391] CR2: 00007ffee758e890 CR3: 0000001f9ba20003 CR4: 00000000001606e0 [ 153.567391] Call Trace: [ 153.567391] ip6_finish_output2+0x34e/0x550 [ 153.567391] __ip6_finish_output+0xe7/0x110 [ 153.567391] ip6_finish_output+0x2d/0xb0 [ 153.567392] ip6_output+0x77/0x120 [ 153.567392] ? __ip6_finish_output+0x110/0x110 [ 153.567392] ip6_local_out+0x3d/0x50 [ 153.567392] ipvlan_queue_xmit+0x56c/0x5e0 [ 153.567393] ? ksize+0x19/0x30 [ 153.567393] ipvlan_start_xmit+0x18/0x50 [ 153.567393] dev_direct_xmit+0xf3/0x1c0 [ 153.567393] packet_direct_xmit+0x69/0xa0 [ 153.567394] packet_sendmsg+0xbf0/0x19b0 [ 153.567394] ? plist_del+0x62/0xb0 [ 153.567394] sock_sendmsg+0x65/0x70 [ 153.567394] sock_write_iter+0x93/0xf0 [ 153.567394] new_sync_write+0x18e/0x1a0 [ 153.567395] __vfs_write+0x29/0x40 [ 153.567395] vfs_write+0xb9/0x1b0 [ 153.567395] ksys_write+0xb1/0xe0 [ 153.567395] __x64_sys_write+0x1a/0x20 [ 153.567395] do_syscall_64+0x43/0x70 [ 153.567396] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 153.567396] RIP: 0033:0x453549 [ 153.567396] Code: Bad RIP value. [ 153.567396] RSP: 002b:00007fdc3a282cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 153.567397] RAX: ffffffffffffffda RBX: 00000000004d32d0 RCX: 0000000000453549 [ 153.567397] RDX: 0000000000000020 RSI: 0000000020000300 RDI: 0000000000000003 [ 153.567398] RBP: 00000000004d32d8 R08: 0000000000000000 R09: 0000000000000000 [ 153.567398] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d32dc [ 153.567398] R13: 00007ffee742260f R14: 00007fdc3a282dc0 R15: 00007fdc3a283700 [ 153.567399] ---[ end trace c1d5ae2b1059ec62 ]--- f60e5990d9c1 ("ipv6: protect skb->sk accesses from recursive dereference inside the stack") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18net: dsa: bcm_sf2: Fix node reference countFlorian Fainelli1-0/+2
of_find_node_by_name() will do an of_node_put() on the "from" argument. With CONFIG_OF_DYNAMIC enabled which checks for device_node reference counts, we would be getting a warning like this: [ 6.347230] refcount_t: increment on 0; use-after-free. [ 6.352498] WARNING: CPU: 3 PID: 77 at lib/refcount.c:156 refcount_inc_checked+0x38/0x44 [ 6.360601] Modules linked in: [ 6.363661] CPU: 3 PID: 77 Comm: kworker/3:1 Tainted: G W 5.4.46-gb78b3e9956e6 #13 [ 6.372546] Hardware name: BCM97278SV (DT) [ 6.376649] Workqueue: events deferred_probe_work_func [ 6.381796] pstate: 60000005 (nZCv daif -PAN -UAO) [ 6.386595] pc : refcount_inc_checked+0x38/0x44 [ 6.391133] lr : refcount_inc_checked+0x38/0x44 ... [ 6.478791] Call trace: [ 6.481243] refcount_inc_checked+0x38/0x44 [ 6.485433] kobject_get+0x3c/0x4c [ 6.488840] of_node_get+0x24/0x34 [ 6.492247] of_irq_find_parent+0x3c/0xe0 [ 6.496263] of_irq_parse_one+0xe4/0x1d0 [ 6.500191] irq_of_parse_and_map+0x44/0x84 [ 6.504381] bcm_sf2_sw_probe+0x22c/0x844 [ 6.508397] platform_drv_probe+0x58/0xa8 [ 6.512413] really_probe+0x238/0x3fc [ 6.516081] driver_probe_device+0x11c/0x12c [ 6.520358] __device_attach_driver+0xa8/0x100 [ 6.524808] bus_for_each_drv+0xb4/0xd0 [ 6.528650] __device_attach+0xd0/0x164 [ 6.532493] device_initial_probe+0x24/0x30 [ 6.536682] bus_probe_device+0x38/0x98 [ 6.540524] deferred_probe_work_func+0xa8/0xd4 [ 6.545061] process_one_work+0x178/0x288 [ 6.549078] process_scheduled_works+0x44/0x48 [ 6.553529] worker_thread+0x218/0x270 [ 6.557285] kthread+0xdc/0xe4 [ 6.560344] ret_from_fork+0x10/0x18 [ 6.563925] ---[ end trace 68f65caf69bb152a ]--- Fix this by adding a of_node_get() to increment the reference count prior to the call. Fixes: afa3b592953b ("net: dsa: bcm_sf2: Ensure correct sub-node is parsed") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18net: ethtool: add missing NETIF_F_GSO_FRAGLIST feature stringAlexander Lobakin1-0/+1
Commit 3b33583265ed ("net: Add fraglist GRO/GSO feature flags") missed an entry for NETIF_F_GSO_FRAGLIST in netdev_features_strings array. As a result, fraglist GSO feature is not shown in 'ethtool -k' output and can't be toggled on/off. The fix is trivial. Fixes: 3b33583265ed ("net: Add fraglist GRO/GSO feature flags") Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18tg3: driver sleeps indefinitely when EEH errors exceed eeh_max_freezesDavid Christensen1-2/+2
The driver function tg3_io_error_detected() calls napi_disable twice, without an intervening napi_enable, when the number of EEH errors exceeds eeh_max_freezes, resulting in an indefinite sleep while holding rtnl_lock. Add check for pcierr_recovery which skips code already executed for the "Frozen" state. Signed-off-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18bareudp: Fixed multiproto mode configurationMartin1-0/+3
Code to handle multiproto configuration is missing. Fixes: 4b5f67232d95 ("net: Special handling for IP & MPLS") Signed-off-by: Martin <martin.varghese@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18Merge branch 's390-qeth-fixes'David S. Miller1-6/+5
Julian Wiedmann says: ==================== s390/qeth: fixes 2020-06-17 please apply the following patch series for qeth to netdev's net tree. The first patch fixes a regression in the error handling for a specific cmd type. I have some follow-ups queued up for net-next to clean this up properly... The second patch fine-tunes the HW offload restrictions that went in with this merge window. In some setups we don't need to apply them. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18s390/qeth: let isolation mode override HW offload restrictionsJulian Wiedmann1-2/+4
When a device is configured with ISOLATION_MODE_FWD, traffic never goes through the internal switch. Don't apply the offload restrictions in this case. Fixes: c619e9a6f52f ("s390/qeth: don't use restricted offloads for local traffic") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18s390/qeth: fix error handling for isolation mode cmdsJulian Wiedmann1-4/+1
Current(?) OSA devices also store their cmd-specific return codes for SET_ACCESS_CONTROL cmds into the top-level cmd->hdr.return_code. So once we added stricter checking for the top-level field a while ago, none of the error logic that rolls back the user's configuration to its old state is applied any longer. For this specific cmd, go back to the old model where we peek into the cmd structure even though the top-level field indicated an error. Fixes: 686c97ee29c8 ("s390/qeth: fix error handling in adapter command callbacks") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18Merge branch 'mptcp-cope-with-syncookie-on-MP_JOINs'David S. Miller2-30/+28
Paolo Abeni says: ==================== mptcp: cope with syncookie on MP_JOINs Currently syncookies on MP_JOIN connections are not handled correctly: the connections fallback to TCP and are kept alive instead of resetting them at fallback time. The first patch propagates the required information up to syn_recv_sock time, and the 2nd patch addresses the unifying the error path for all MP_JOIN requests. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18mptcp: drop MP_JOIN request sock on syn cookiesPaolo Abeni1-8/+10
Currently any MPTCP socket using syn cookies will fallback to TCP at 3rd ack time. In case of MP_JOIN requests, the RFC mandate closing the child and sockets, but the existing error paths do not handle the syncookie scenario correctly. Address the issue always forcing the child shutdown in case of MP_JOIN fallback. Fixes: ae2dd7164943 ("mptcp: handle tcp fallback when using syn cookies") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18mptcp: cache msk on MP_JOIN init_reqPaolo Abeni2-22/+18
The msk ownership is transferred to the child socket at 3rd ack time, so that we avoid more lookups later. If the request does not reach the 3rd ack, the MSK reference is dropped at request sock release time. As a side effect, fallback is now tracked by a NULL msk reference instead of zeroed 'mp_join' field. This will simplify the next patch. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18net: Fix the arp error in some casesguodeqing1-1/+1
ie., $ ifconfig eth0 6.6.6.6 netmask 255.255.255.0 $ ip rule add from 6.6.6.6 table 6666 $ ip route add 9.9.9.9 via 6.6.6.6 $ ping -I 6.6.6.6 9.9.9.9 PING 9.9.9.9 (9.9.9.9) from 6.6.6.6 : 56(84) bytes of data. 3 packets transmitted, 0 received, 100% packet loss, time 2079ms $ arp Address HWtype HWaddress Flags Mask Iface 6.6.6.6 (incomplete) eth0 The arp request address is error, this is because fib_table_lookup in fib_check_nh lookup the destnation 9.9.9.9 nexthop, the scope of the fib result is RT_SCOPE_LINK,the correct scope is RT_SCOPE_HOST. Here I add a check of whether this is RT_TABLE_MAIN to solve this problem. Fixes: 3bfd847203c6 ("net: Use passed in table for nexthop lookups") Signed-off-by: guodeqing <geffrey.guo@huawei.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18Merge branch 'sja1105-fixes'David S. Miller1-6/+6
Vladimir Oltean says: ==================== Fix VLAN checks for SJA1105 DSA tc-flower filters This fixes a ridiculous situation where the driver, in VLAN-unaware mode, would refuse accepting any tc filter: tc filter replace dev sw1p3 ingress flower skip_sw \ dst_mac 42:be:24:9b:76:20 \ action gate (...) Error: sja1105: Can only gate based on {DMAC, VID, PCP}. tc filter replace dev sw1p3 ingress protocol 802.1Q flower skip_sw \ vlan_id 1 vlan_prio 0 dst_mac 42:be:24:9b:76:20 \ action gate (...) Error: sja1105: Can only gate based on DMAC. So, without changing the VLAN awareness state, it says it doesn't want VLAN-aware rules, and it doesn't want VLAN-unaware rules either. One would say it's in Schrodinger's state... Now, the situation has been made worse by commit 7f14937facdc ("net: dsa: sja1105: keep the VLAN awareness state in a driver variable"), which made VLAN awareness a ternary attribute, but after inspecting the code from before that patch with a truth table, it looks like the logical bug was there even before. While attempting to fix this, I also noticed some leftover debugging code in one of the places that needed to be fixed. It would have appeared in the context of patch 3/3 anyway, so I decided to create a patch that removes it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18net: dsa: sja1105: fix checks for VLAN state in gate actionVladimir Oltean1-1/+3
This action requires the VLAN awareness state of the switch to be of the same type as the key that's being added: - If the switch is unaware of VLAN, then the tc filter key must only contain the destination MAC address. - If the switch is VLAN-aware, the key must also contain the VLAN ID and PCP. But this check doesn't work unless we verify the VLAN awareness state on both the "if" and the "else" branches. Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18net: dsa: sja1105: fix checks for VLAN state in redirect actionVladimir Oltean1-1/+3
This action requires the VLAN awareness state of the switch to be of the same type as the key that's being added: - If the switch is unaware of VLAN, then the tc filter key must only contain the destination MAC address. - If the switch is VLAN-aware, the key must also contain the VLAN ID and PCP. But this check doesn't work unless we verify the VLAN awareness state on both the "if" and the "else" branches. Fixes: dfacc5a23e22 ("net: dsa: sja1105: support flow-based redirection via virtual links") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18net: dsa: sja1105: remove debugging code in sja1105_vl_gateVladimir Oltean1-4/+0
This shouldn't be there. Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 04:20:21 +0000