Age | Commit message (Collapse) | Author | Files | Lines |
|
We also check the input number of vcpus against the maximum supported.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-8-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename vcpu_memory_bytes to something with "percpu" in it
in order to be less ambiguous. Also make it global to
simplify things.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-7-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-3-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Wrfract will be used by the dirty logging perf test introduced later in
this series to dirty memory sparsely.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-5-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a helper function to get the current time and return the time since
a given start time. Use that function to simplify the timekeeping in the
demand paging test.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-4-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rounding the address the guest writes to a host page boundary
will only have an effect if the host page size is larger than the guest
page size, but in that case the guest write would still go to the same
host page. There's no reason to round the address down, so remove the
rounding to simplify the demand paging test.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-3-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Much of the code in demand_paging_test can be reused by other, similar
multi-vCPU-memory-touching-perfromance-tests. Factor that common code
out for reuse.
No functional change expected.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove the clear_dirty_log test, instead merge it into the existing
dirty_log_test. It should be cleaner to use this single binary to do
both tests, also it's a preparation for the upcoming dirty ring test.
The default behavior will run all the modes in sequence.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012233.6013-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We used not to clear the dirty bitmap before because KVM_GET_DIRTY_LOG
would overwrite it the next time it copies the dirty log onto it.
In the upcoming dirty ring tests we'll start to fetch dirty pages from
a ring buffer, so no one is going to clear the dirty bitmap for us.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012228.5916-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add support for the SVE registers to get-reg-list and create a
new test, get-reg-list-sve, which tests them when running on a
machine with SVE support.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201029201703.102716-5-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Check for KVM_GET_REG_LIST regressions. The blessed list was
created by running on v4.15 with the --core-reg-fixup option.
The following script was also used in order to annotate system
registers with their names when possible. When new system
registers are added the names can just be added manually using
the same grep.
while read reg; do
if [[ ! $reg =~ ARM64_SYS_REG ]]; then
printf "\t$reg\n"
continue
fi
encoding=$(echo "$reg" | sed "s/ARM64_SYS_REG(//;s/),//")
if ! name=$(grep "$encoding" ../../../../arch/arm64/include/asm/sysreg.h); then
printf "\t$reg\n"
continue
fi
name=$(echo "$name" | sed "s/.*SYS_//;s/[\t ]*sys_reg($encoding)$//")
printf "\t$reg\t/* $name */\n"
done < <(aarch64/get-reg-list --core-reg-fixup --list)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201029201703.102716-3-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a set of tests that ensure the guest cannot access paravirtual msrs
and hypercalls that have been disabled in the KVM_CPUID_FEATURES leaf.
Expect a #GP in the case of msr accesses and -KVM_ENOSYS from
hypercalls.
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20201027231044.655110-7-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add the infrastructure needed to enable exception handling in selftests.
This allows any of the exception and interrupt vectors to be overridden
in the guest.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20201012194716.3950330-4-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Ensure the out value 'uc' in get_ucall() is properly reporting
UCALL_NONE if the call fails. The return value will be correctly
reported, however, the out parameter 'uc' will not be. Clear the struct
to ensure the correct value is being reported in the out parameter.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20201012194716.3950330-3-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fix the layout of 'struct desc64' to match the layout described in the
SDM Vol 3, Chapter 3 "Protected-Mode Memory Management", section 3.4.5
"Segment Descriptors", Figure 3-8 "Segment Descriptor". The test added
later in this series relies on this and crashes if this layout is not
correct.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20201012194716.3950330-2-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Windows2016 guest tries to enable LBR by setting the corresponding bits
in MSR_IA32_DEBUGCTLMSR. KVM does not emulate MSR_IA32_DEBUGCTLMSR and
spams the host kernel logs with error messages like:
kvm [...]: vcpu1, guest rIP: 0xfffff800a8b687d3 kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR 0x1, nop"
This patch fixes this by enabling error logging only with
'report_ignored_msrs=1'.
Signed-off-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Message-Id: <20201105153932.24316-1-pankaj.gupta.linux@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 5b9bb0ebbcdc ("kvm: x86: encapsulate wrmsr(MSR_KVM_SYSTEM_TIME)
emulation in helper fn", 2020-10-21) subtly changed the behavior of guest
writes to MSR_KVM_SYSTEM_TIME(_NEW). Restore the previous behavior; update
the masterclock any time the guest uses a different msr than before.
Fixes: 5b9bb0ebbcdc ("kvm: x86: encapsulate wrmsr(MSR_KVM_SYSTEM_TIME) emulation in helper fn", 2020-10-21)
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20201027231044.655110-6-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Make the paravirtual cpuid enforcement mechanism idempotent to ioctl()
ordering by updating pv_cpuid.features whenever userspace requests the
capability. Extract this update out of kvm_update_cpuid_runtime() into a
new helper function and move its other call site into
kvm_vcpu_after_set_cpuid() where it more likely belongs.
Fixes: 66570e966dd9 ("kvm: x86: only provide PV features if enabled in guest's CPUID")
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20201027231044.655110-5-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
commit 66570e966dd9 ("kvm: x86: only provide PV features if enabled in
guest's CPUID") only protects against disallowed guest writes to KVM
paravirtual msrs, leaving msr reads unchecked. Fix this by enforcing
KVM_CPUID_FEATURES for msr reads as well.
Fixes: 66570e966dd9 ("kvm: x86: only provide PV features if enabled in guest's CPUID")
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20201027231044.655110-4-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Recent introduction of the userspace msr filtering added code that uses
negative error codes for cases that result in either #GP delivery to
the guest, or handled by the userspace msr filtering.
This breaks an assumption that a negative error code returned from the
msr emulation code is a semi-fatal error which should be returned
to userspace via KVM_RUN ioctl and usually kill the guest.
Fix this by reusing the already existing KVM_MSR_RET_INVALID error code,
and by adding a new KVM_MSR_RET_FILTERED error code for the
userspace filtered msrs.
Fixes: 291f35fb2c1d1 ("KVM: x86: report negative values from wrmsr emulation to userspace")
Reported-by: Qian Cai <cai@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201101115523.115780-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Should be squashed into 66570e966dd9cb4f.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201023183358.50607-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It should be an accident when rebase, since we've already have section
8.25 (which is KVM_CAP_S390_DIAG318). Fix the number.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012044.5151-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fix an off-by-one style bug in pte_list_add() where it failed to
account the last full set of SPTEs, i.e. when desc->sptes is full
and desc->more is NULL.
Merge the two "PTE_LIST_EXT-1" checks as part of the fix to avoid
an extra comparison.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <1601196297-24104-1-git-send-email-lirongqing@baidu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for v5.10, take #2
- Fix compilation error when PMD and PUD are folded
- Fix regresssion of the RAZ behaviour of ID_AA64ZFR0_EL1
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph:
- revert a nvme_queue size optimization (Keith Bush)
- fabrics timeout races fixes (Chao Leng and Sagi Grimberg)"
- null_blk zone locking fix (Damien)
* tag 'block-5.10-2020-11-07' of git://git.kernel.dk/linux-block:
null_blk: Fix scheduling in atomic with zoned mode
nvme-tcp: avoid repeated request completion
nvme-rdma: avoid repeated request completion
nvme-tcp: avoid race between time out and tear down
nvme-rdma: avoid race between time out and tear down
nvme: introduce nvme_sync_io_queues
Revert "nvme-pci: remove last_sq_tail"
|
|
Pull io_uring fixes from Jens Axboe:
"A set of fixes for io_uring:
- SQPOLL cancelation fixes
- Two fixes for the io_identity COW
- Cancelation overflow fix (Pavel)
- Drain request cancelation fix (Pavel)
- Link timeout race fix (Pavel)"
* tag 'io_uring-5.10-2020-11-07' of git://git.kernel.dk/linux-block:
io_uring: fix link lookup racing with link timeout
io_uring: use correct pointer for io_uring_show_cred()
io_uring: don't forget to task-cancel drained reqs
io_uring: fix overflowed cancel w/ linked ->files
io_uring: drop req/tctx io_identity separately
io_uring: ensure consistent view of original task ->mm from SQPOLL
io_uring: properly handle SQPOLL request cancelations
io-wq: cancel request if it's asking for files and we don't have them
|
|
Gratian managed to trigger the BUG_ON(!newowner) in fixup_pi_state_owner().
This is one possible chain of events leading to this:
Task Prio Operation
T1 120 lock(F)
T2 120 lock(F) -> blocks (top waiter)
T3 50 (RT) lock(F) -> boosts T1 and blocks (new top waiter)
XX timeout/ -> wakes T2
signal
T1 50 unlock(F) -> wakes T3 (rtmutex->owner == NULL, waiter bit is set)
T2 120 cleanup -> try_to_take_mutex() fails because T3 is the top waiter
and the lower priority T2 cannot steal the lock.
-> fixup_pi_state_owner() sees newowner == NULL -> BUG_ON()
The comment states that this is invalid and rt_mutex_real_owner() must
return a non NULL owner when the trylock failed, but in case of a queued
and woken up waiter rt_mutex_real_owner() == NULL is a valid transient
state. The higher priority waiter has simply not yet managed to take over
the rtmutex.
The BUG_ON() is therefore wrong and this is just another retry condition in
fixup_pi_state_owner().
Drop the locks, so that T3 can make progress, and then try the fixup again.
Gratian provided a great analysis, traces and a reproducer. The analysis is
to the point, but it confused the hell out of that tglx dude who had to
page in all the futex horrors again. Condensed version is above.
[ tglx: Wrote comment and changelog ]
Fixes: c1e2f0eaf015 ("futex: Avoid violating the 10th rule of futex")
Reported-by: Gratian Crisan <gratian.crisan@ni.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87a6w6x7bb.fsf@ni.com
Link: https://lore.kernel.org/r/87sg9pkvf7.fsf@nanos.tec.linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Driver bugfixes for I2C.
Most of them are for the new mlxbf driver which got more exposure
after rc1. The sh_mobile patch should already have reached you during
the merge window, but I accidently dropped it. However, since it fixes
a problem with rebooting, it is still fine for rc3"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: slave should do WRITE_REQUESTED before WRITE_RECEIVED
i2c: designware: call i2c_dw_read_clear_intrbits_slave() once
i2c: mlxbf: I2C_MLXBF should depend on MELLANOX_PLATFORM
i2c: mlxbf: Update author and maintainer email info
i2c: mlxbf: Update reference clock frequency
i2c: mlxbf: Remove unecessary wrapper functions
i2c: mlxbf: Fix resrticted cast warning of sparse
i2c: mlxbf: Add CONFIG_ACPI to guard ACPI function call
i2c: sh_mobile: implement atomic transfers
i2c: mediatek: move dma reset before i2c reset
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- SPDX comment style fix
- ignore memory that is unusable
- avoid setting a kernel text offset for the !MMU kernels, where
skipping the first page of memory is both unnecessary and costly
- avoid passing the flag bits in satp to pfn_to_virt()
- fix __put_kernel_nofault, where we had the arguments to
__put_user_nocheck reversed
- workaround for a bug in the FU540 to avoid triggering PMP issues
during early boot
- change to how we pull symbols out of the vDSO. The old mechanism was
removed from binutils-2.35 (and has been backported to Debian's 2.34)
* tag 'riscv-for-linus-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix the VDSO symbol generaton for binutils-2.35+
RISC-V: Use non-PGD mappings for early DTB access
riscv: uaccess: fix __put_kernel_nofault()
riscv: fix pfn_to_virt err in do_page_fault().
riscv: Set text_offset correctly for M-Mode
RISC-V: Remove any memblock representing unusable memory area
risc-v: kernel: ftrace: Fixes improper SPDX comment style
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.10-rc3
Here's a fix for a long-standing issue with the cyberjack driver and
some new device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.10-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit FN980 composition 0x1055
USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231
USB: serial: cyberjack: fix write-URB completion race
USB: serial: option: add Quectel EC200T module support
|
|
As shown through runtime testing, the "filename" allocation is not
always freed in perf_event_parse_addr_filter().
There are three possible ways that this could happen:
- It could be allocated twice on subsequent iterations through the loop,
- or leaked on the success path,
- or on the failure path.
Clean up the code flow to make it obvious that 'filename' is always
freed in the reallocation path and in the two return paths as well.
We rely on the fact that kfree(NULL) is NOP and filename is initialized
with NULL.
This fixes the leak. No other side effects expected.
[ Dan Carpenter: cleaned up the code flow & added a changelog. ]
[ Ingo Molnar: updated the changelog some more. ]
Fixes: 375637bc5249 ("perf/core: Introduce address range filtering")
Signed-off-by: "kiyin(尹亮)" <kiyin@tencent.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "Srivatsa S. Bhat" <srivatsa@csail.mit.edu>
Cc: Anthony Liguori <aliguori@amazon.com>
--
kernel/events/core.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
|
|
Testing shows a problem in that UV5 hubless systems were not being
recognized. Add them to the list of OEM IDs checked.
Fixes: 6c7794423a998 ("Add UV5 direct references")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201105222741.157029-4-mike.travis@hpe.com
|
|
Testing shows that trailing spaces caused problems with the OEM_ID and
the OEM_TABLE_ID. One being that the OEM_ID would not string compare
correctly. Another the OEM_ID and OEM_TABLE_ID would be concatenated
in the printout. Remove any trailing spaces.
Fixes: 1e61f5a95f191 ("Add and decode Arch Type in UVsystab")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201105222741.157029-3-mike.travis@hpe.com
|
|
Testing shows a problem in that the OEM_TABLE_ID was missing for
hubless systems. This is used to determine the APIC type (legacy or
extended). Add the OEM_TABLE_ID to the early hubless processing.
Fixes: 1e61f5a95f191 ("Add and decode Arch Type in UVsystab")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201105222741.157029-2-mike.travis@hpe.com
|
|
Add missing __acquires() and __releases() annotations. Also, in an
"this should never happen" WARN_ON check, if it *does* actually
happen, we need to release j_state_lock since this function is always
supposed to release that lock. Otherwise, things will quickly grind
to a halt after the WARN_ON trips.
Fixes: 96f1e0974575 ("jbd2: avoid long hold times of j_state_lock...")
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Add missing __acquire() and __releases() annotations, and make
fc_ineligible_reasons[] static, as it is not used outside of
fs/ext4/fast_commit.c.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Drop no_fc mount option that disable fast commit even if it was
enabled at mkfs time. Move fc_debug_force mount option under ifdef
EXT4_DEBUG to annotate that this is strictly for debugging and testing
purposes and should not be used in production.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-23-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fast commit should not be started if the journal is aborted.
Signed-off-by: Harshad Shirwadkar<harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-22-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fast commit file system states are recorded in
sbi->s_mount_flags. Fast commit expects these bit manipulations to be
atomic. This patch adds helpers to make those modifications atomic.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-21-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
If the journal dev is different from fsdev, issue a cache flush before
committing fast commit blocks to disk.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201106035911.1942128-20-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fast commits don't work with data journalling. This patch disables the
fast commit support when data journalling is turned on.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201106035911.1942128-19-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In case of fast commits, determine if the inode is dirty by checking
if the inode is on fast commit list. This also helps us get rid of
ext4_inode_info.i_fc_committed_subtid field.
Reported-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-18-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Remove unnecessary calls to ext4_fc_start_update() and
ext4_fc_stop_update() from ext4_file_mmap().
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-17-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Mark the fast commit buffer as dirty before submission.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-16-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Add a TODO to remember fixing REQ_FUA | REQ_PREFLUSH for fast commit
buffers. Also, fix a typo in top level comment in fast_commit.c
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-15-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch removes the deduplicates the code that implements waiting
on inode that's being committed. That code is moved into a new
function.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-14-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Take journal state lock before reading journal->j_commit_sequence.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-13-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fast commit buffers should be filled in before toucing their
state. Remove code that sets buffer state as dirty before the buffer
is passed to the file system.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-12-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fast commit performance can be optimized if commit thread doesn't wait
for ongoing fast commits to complete until the transaction enters
T_FLUSH state. Document this optimization.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-11-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In jbd2_fc_end_commit_fallback(), we know which tid to commit. There's
no need for caller to pass it.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-10-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|