summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-10-11md: remove typedefs: mirror_info_t -> struct mirror_infoNeilBrown4-17/+13
Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bioNeilBrown4-76/+71
Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11md: remove typedefs: mdk_thread_t -> struct md_threadNeilBrown5-18/+20
Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11md: remove typedefs: mddev_t -> struct mddevNeilBrown16-420/+417
Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11md: removing typedefs: mdk_rdev_t -> struct md_rdevNeilBrown17-219/+219
The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07md/raid0: convert some printks to pr_debug.NeilBrown1-48/+50
When md assembles a RAID0 array it prints out lots of info which is really just for debugging, so convert that to pr_debug. It also prints out the resulting configuration which could be interesting, so keep that as 'printk' but tidy it up a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07md: remove PRINTK and dprintk debugging and use pr_debugNeilBrown3-50/+35
Being able to dynamically enable these make them much more useful. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07md: remove some old DEBUGging code.NeilBrown2-84/+0
This code is not really helpful and is hard to maintain, so just discard it. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07md/raid5: convert to macros into inline functions.NeilBrown1-3/+14
More type-safety. Easier to read. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07md/raid1/ avoid bio search in end_sync_read()NeilBrown1-2/+1
We know which device we just read from so we don't need to search the bios to find out. Just use ->read_disk. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07md/raid1: factor out common bio handling codeNamhyung Kim1-20/+24
When normal-write and sync-read/write bio completes, we should find out the disk number the bio belongs to. Factor those common code out to a separate function. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07md/raid5: remove pointless NULL test.NeilBrown1-4/+2
In the 'abort' branch of run(), 'conf' cannot possibly be NULL, so remove the test. Reported-by: Zdenek Kabelac <zdenek.kabelac@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07md/raid1: add documentation to r1_private_data_s data structure.NeilBrown1-17/+42
There wasn't much and it is inconsistent. Also rearrange fields to keep related fields together. Reported-by: Aapo Laine <aapo.laine@shiftmail.org> Signed-off-by: NeilBrown <neilb@suse.de>
2011-09-23md: don't delay reboot by 1 second if no MD devices existDaniel P. Berrange1-2/+6
The md_notify_reboot() method includes a call to mdelay(1000), to deal with "exotic SCSI devices" which are too volatile on reboot. The delay is unconditional. Even if the machine does not have any block devices, let alone MD devices, the kernel shutdown sequence is slowed down. 1 second does not matter much with physical hardware, but with certain virtualization use cases any wasted time in the bootup & shutdown sequence counts for alot. * drivers/md/md.c: md_notify_reboot() - only impose a delay if there was at least one MD device to be stopped during reboot Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-09-21trival: md_k.h should be md.h in the beginning comment of file md.hWang Sheng-Hui1-1/+1
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-09-21md/bitmap: improve handling of 'allclean'.NeilBrown1-15/+20
The 'allclean' flag is used to cache the fact that there is nothing to do, so we can avoid waking up and scanning the bitmap regularly. The two sorts of pages that might need the attention of the bitmap daemon are BITMAP_PAGE_PENDING and BITMAP_PAGE_NEEDWRITE pages. So make sure allclean reflects exactly when there are none of those. So: set it before scanning all pages with either bit set. clear it whenever these bits are set clear it when we desire not to clear one of these bits. don't clear it any other time. Signed-off-by: NeilBrown <neilb@suse.de>
2011-09-21md/bitmap: rename and tidy up BITMAP_PAGE_CLEANNeilBrown1-19/+19
The flag 'BITMAP_PAGE_CLEAN' has a confusing name as it doesn't mean that the page is clean, but rather that there are counters in the page which allow bits in the bitmap to be cleared - i.e. maybe cleaning can happen. So change it to BITMAP_PAGE_PENDING and fix some irregularities: - Don't set it in bitmap_init_from_disk as bitmap_set_memory_bits sets it when needed - in bitmap_daemon_work, if we find a counter that is '1', but need_sync is set, then set BITMAP_PAGE_PENDING again (it was recently cleared) to ensure we don't forget about this bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-09-21md: Avoid waking up a thread after it has been freed.NeilBrown6-15/+26
Two related problems: 1/ some error paths call "md_unregister_thread(mddev->thread)" without subsequently clearing ->thread. A subsequent call to mddev_unlock will try to wake the thread, and crash. 2/ Most calls to md_wakeup_thread are protected against the thread disappeared either by: - holding the ->mutex - having an active request, so something else must be keeping the array active. However mddev_unlock calls md_wakeup_thread after dropping the mutex and without any certainty of an active request, so the ->thread could theoretically disappear. So we need a spinlock to provide some protections. So change md_unregister_thread to take a pointer to the thread pointer, and ensure that it always does the required locking, and clears the pointer properly. Reported-by: "Moshe Melnikov" <moshe@zadarastorage.com> Signed-off-by: NeilBrown <neilb@suse.de> cc: stable@kernel.org
2011-09-10md: Fix handling for devices from 2TB to 4TB in 0.90 metadata.NeilBrown1-2/+10
0.90 metadata uses an unsigned 32bit number to count the number of kilobytes used from each device. This should allow up to 4TB per device. However we multiply this by 2 (to get sectors) before casting to a larger type, so sizes above 2TB get truncated. Also we allow rdev->sectors to be larger than 4TB, so it is possible for the array to be resized larger than the metadata can handle. So make sure rdev->sectors never exceeds 4TB when 0.90 metadata is in used. Also the sanity check at the end of super_90_load should include level 1 as it used ->size too. (RAID0 and Linear don't use ->size at all). Reported-by: Pim Zandbergen <P.Zandbergen@macroscoop.nl> Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2011-09-10md/raid1,10: Remove use-after-free bug in make_request.NeilBrown2-10/+17
A single request to RAID1 or RAID10 might result in multiple requests if there are known bad blocks that need to be avoided. To detect if we need to submit another write request we test: if (sectors_handled < (bio->bi_size >> 9)) { However this is after we call **_write_done() so the 'bio' no longer belongs to us - the writes could have completed and the bio freed. So move the **_write_done call until after the test against bio->bi_size. This addresses https://bugzilla.kernel.org/show_bug.cgi?id=41862 Reported-by: Bruno Wolff III <bruno@wolff.to> Tested-by: Bruno Wolff III <bruno@wolff.to> Signed-off-by: NeilBrown <neilb@suse.de>
2011-09-10md/raid10: unify handling of write completion.NeilBrown1-20/+18
A write can complete at two different places: 1/ when the last member-device write completes, through raid10_end_write_request 2/ in make_request() when we remove the initial bias from ->remaining. These two should do exactly the same thing and the comment says they do, but they don't. So factor the correct code out into a function and call it in both places. This makes the code much more similar to RAID1. The difference is only significant if there is an error, and they usually take a while, so it is unlikely that there will be an error already when make_request is completing, so this is unlikely to cause real problems. Signed-off-by: NeilBrown <neilb@suse.de>
2011-09-10Avoid dereferencing a 'request_queue' after last close.NeilBrown1-2/+5
On the last close of an 'md' device which as been stopped, the device is destroyed and in particular the request_queue is freed. The free is done in a separate thread so it might happen a short time later. __blkdev_put calls bdev_inode_switch_bdi *after* ->release has been called. Since commit f758eeabeb96f878c860e8f110f94ec8820822a9 bdev_inode_switch_bdi will dereference the 'old' bdi, which lives inside a request_queue, to get a spin lock. This causes the last close on an md device to sometime take a spin_lock which lives in freed memory - which results in an oops. So move the called to bdev_inode_switch_bdi before the call to ->release. Cc: Christoph Hellwig <hch@lst.de> Cc: Hugh Dickins <hughd@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Wu Fengguang <fengguang.wu@intel.com> Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2011-08-31md/raid5: fix a hang on device failure.NeilBrown1-1/+1
Waiting for a 'blocked' rdev to become unblocked in the raid5d thread cannot work with internal metadata as it is the raid5d thread which will clear the blocked flag. This wasn't a problem in 3.0 and earlier as we only set the blocked flag when external metadata was used then. However we now set it always, so we need to be more careful. Signed-off-by: NeilBrown <neilb@suse.de>
2011-08-30md: fix clearing of 'blocked' flag in the presence of bad blocks.NeilBrown1-1/+1
When the 'blocked' flag on a device is cleared while there are unacknowledged bad blocks we must fail the device. This is needed for backwards compatability of the interface. The code currently uses the wrong test for "unacknowledged bad blocks exist". Change it to the right test. Signed-off-by: NeilBrown <neilb@suse.de>
2011-08-25md/linear: avoid corrupting structure while waiting for rcu_free to complete.NeilBrown1-1/+1
I don't know what I was thinking putting 'rcu' after a dynamically sized array! The array could still be in use when we call rcu_free() (That is the point) so we mustn't corrupt it. Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2011-08-25md: use REQ_NOIDLE flag in md_super_write()Namhyung Kim1-1/+1
Queue idling is used for the anticipation of immediate sequencial I/O's but md_super_write() is a kind of one- shot operation, coupled with md_super_wait(), so the idling in this case will be just a waste of time. Specifying REQ_NOIDLE prevents it. Instead of adding the flag to submit_bio() directly, use pre-defined macro WRITE_FLUSH_FUA. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-08-25md: ensure changes to 'write-mostly' are reflected in metadata.NeilBrown1-0/+5
The 'write-mostly' flag can be changed through sysfs. With 0.90 metadata, those changes are reflected in the metadata. For 1.x metadata, they aren't. So fix super_1_sync to record 'write-mostly' status. Signed-off-by: NeilBrown <neilb@suse.de>
2011-08-25md: report failure if a 'set faulty' request doesn't.NeilBrown1-1/+6
Sometimes a device will refuse to be set faulty. e.g. RAID1 will never let the last working device become faulty. So check if "md_error()" did manage to set the faulty flag and fail with EBUSY if it didn't. Resolves-Debian-Bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=601198 Reported-by: Mike Hommey <mh+reportbug@glandium.org> Signed-off-by: NeilBrown <neilb@suse.de>
2011-08-23Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds3-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-32, vdso: On system call restart after SYSENTER, use int $0x80 x86, UV: Remove UV delay in starting slave cpus x86, olpc: Wait for last byte of EC command to be accepted
2011-08-23x86-32, vdso: On system call restart after SYSENTER, use int $0x80H. Peter Anvin1-1/+1
When we enter a 32-bit system call via SYSENTER or SYSCALL, we shuffle the arguments to match the int $0x80 calling convention. This was probably a design mistake, but it's what it is now. This causes errors if the system call as to be restarted. For SYSENTER, we have to invoke the instruction from the vdso as the return address is hardcoded. Accordingly, we can simply replace the jump in the vdso with an int $0x80 instruction and use the slower entry point for a post-restart. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/CA%2B55aFztZ=r5wa0x26KJQxvZOaQq8s2v3u50wCyJcA-Sc4g8gQ@mail.gmail.com Cc: <stable@kernel.org>
2011-08-23m68k: fix __page_to_pfn for a const struct page argumentIan Campbell1-1/+1
Fixes fallout due to the removal of the cast in commit aa462abe8aaf ("mm: fix __page_to_pfn for a const struct page argument") Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-23Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds56-81/+78
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: fix tracing builds inside the source tree xfs: remove subdirectories xfs: don't expect xfs headers to be in subdirectories
2011-08-23Merge git://git.infradead.org/users/cbou/battery-3.1Linus Torvalds3-0/+3
* git://git.infradead.org/users/cbou/battery-3.1: s3c-adc-battery: Fix compilation error due to missing header (module.h) max8997_charger: Needs module.h max8998_charger: Needs module.h
2011-08-23Merge branch 'drm-fixes' of ↵Linus Torvalds6-15/+70
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon: Extended DDC Probing for Toshiba L300D Radeon Mobility X1100 HDMI-A Connector drm/ttm: ensure ttm for new node is bound before calling move_notify() drm/ttm: unbind ttm before destroying node in accel move cleanup drm/ttm: fix ttm_bo_add_ttm(user) failure path drm/radeon: Make vramlimit parameter actually work. drm/radeon: Explicitly print GTT/VRAM offsets on test failure. drm/radeon: Take IH ring into account for test size calculation. drm/radeon/alpha: Add Alpha support to Radeon DRM code
2011-08-23Revert "irq: Always set IRQF_ONESHOT if no primary handler is specified"Linus Torvalds1-1/+0
This reverts commit f3637a5f2e2eb391ff5757bc83fb5de8f9726464. It turns out that this breaks several drivers, one example being OMAP boards which use the on-board OMAP UARTs and the omap-serial driver that will not boot to userspace after the commit. Paul Walmsley reports that enabling CONFIG_DEBUG_SHIRQ reveals 'IRQ handler type mismatch' errors: IRQ handler type mismatch for IRQ 74 current handler: serial idle ... and the reason is that setting IRQF_ONESHOT will now result in those interrupt handlers having different IRQF flags, and thus being unsharable. So the commit log in the reverted commit: "Since it is required for those users and there is no difference for others it makes sense to add this flag unconditionally." is simply not true: there may not be any difference from a "actions at irq time", but there is a *big* difference wrt this flag testing irq management (see __setup_irq() in kernel/irq/manage.c). One solution may be to stop verifying IRQF_ONESHOT in __setup_irq(), but right now the safe course of action is to revert the change. Let's revisit this in a later merge window. Reported-by: Paul Walmsley <paul@pwsan.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Requested-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-23drm/radeon: Extended DDC Probing for Toshiba L300D Radeon Mobility X1100 ↵Thomas Reim1-0/+10
HDMI-A Connector Toshiba Satellite L300D with ATI Mobility Radeon X1100 sends data to i2c bus for a HDMI connector that is not implemented/existent on the notebook's board. Fix by applying extented DDC probing for this connector. Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC Lines Tested for kernel 2.6.38 on Toshiba Satellite L300D notebook BugLink: http://bugs.launchpad.net/bugs/826677 Signed-off-by: Thomas Reim <reimth@gmail.com> Acked-by: Chris Routh <routhy@gmail.com> Cc: <stable@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-23drm/ttm: ensure ttm for new node is bound before calling move_notify()Ben Skeggs1-4/+6
This was true for new TTM_PL_SYSTEM and new TTM_PL_TT cases, but wasn't the case on TTM_PL_SYSTEM<->TTM_PL_TT moves, which causes trouble on some paths as nouveau's move_notify() hook requires that the dma addresses be valid at this point. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-23drm/ttm: unbind ttm before destroying node in accel move cleanupBen Skeggs1-1/+1
Nouveau makes the assumption that if a TTM is bound there will be a mm_node around for it and the backwards ordering here resulted in a use-after-free on some eviction paths. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-23drm/ttm: fix ttm_bo_add_ttm(user) failure pathMarcin Slusarz1-1/+3
ttm_tt_destroy kfrees passed object, so we need to nullify a reference to it. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: stable@kernel.org Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-22xfs: fix tracing builds inside the source treeChristoph Hellwig1-0/+2
The code really requires the current source directory to be in the header search path. We already do this if building with an object tree separate from the source, but it needs to be added manually if building inside the source. The cflags addition for it accidentally got removed when collapsing the xfs directory structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2011-08-22Linux 3.1-rc3v3.1-rc3Linus Torvalds1-2/+2
2011-08-22Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds6-8/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Add group event scheduling option to perf record/stat MAINTAINERS: Fix list of perf events source files perf tools: Fix build against newer glibc perf tools: Fix error handling of unknown events perf evlist: Fix missing event name init for default event perf list: Fix exit value
2011-08-22Merge branch 'stable/bug.fixes' of ↵Linus Torvalds5-11/+15
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/tracing: Fix tracing config option properly xen: Do not enable PV IPIs when vector callback not present xen/x86: replace order-based range checking of M2P table by linear one xen: xen-selfballoon.c needs more header files
2011-08-22xen/tracing: Fix tracing config option properlyJeremy Fitzhardinge1-1/+1
Steven Rostedt says we should use CONFIG_EVENT_TRACING. Cc:Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-22xen: Do not enable PV IPIs when vector callback not presentStefano Stabellini1-2/+2
Fix regression for HVM case on older (<4.1.1) hypervisors caused by commit 99bbb3a84a99cd04ab16b998b20f01a72cfa9f4f Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Date: Thu Dec 2 17:55:10 2010 +0000 xen: PV on HVM: support PV spinlocks and IPIs This change replaced the SMP operations with event based handlers without taking into account that this only works when the hypervisor supports callback vectors. This causes unexplainable hangs early on boot for HVM guests with more than one CPU. BugLink: http://bugs.launchpad.net/bugs/791850 CC: stable@kernel.org Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-and-Reported-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-22drm/radeon: Make vramlimit parameter actually work.Michel Dänzer1-0/+2
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-22drm/radeon: Explicitly print GTT/VRAM offsets on test failure.Michel Dänzer1-6/+18
Otherwise these would need to be painstakingly calculated looking at the source code. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-22drm/radeon: Take IH ring into account for test size calculation.Michel Dänzer1-3/+7
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-22drm/radeon/alpha: Add Alpha support to Radeon DRM codeJay Estabrook1-0/+23
Alpha needs to have available the system bus address for the Radeon's local memory, so that it can be used in ttm_bo_vm_fault(), when building the PTEs for accessing that VRAM. So, we make bus.addr hold the ioremap() return, and then we can modify bus.base appropriately for use during page fault processing. Signed-off-by: Jay Estabrook <jay.estabrook@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-21Merge branch 'fixes' of ↵Linus Torvalds1-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: handle ack_busy when fetching the Config ROM
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 22:42:03 +0000