| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
MBDRC supports different modes of operation. There is no configuration
required for bypass mode. The hw_params() call does not filter bypass
mode correctly and it leads to following Smatch static checker warning:
sound/soc/tegra/tegra210_mbdrc.c:778 tegra210_mbdrc_hw_params()
warn: bitwise AND condition is false here
Fix this condition by using proper mode mask and just return for bypass
mode.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 7358a803c778 ("ASoC: tegra: Add Tegra210 based OPE driver")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1655267914-24702-1-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
I2S reset failures are seen on Tegra210 and later platforms. This indicates
absence of I2S bit clock, which is required to perform the reset operation.
Following failures are seen with I2S based tests on Tegra210 and later:
tegra210-i2s 2901100.i2s: timeout: failed to reset I2S for playback
tegra210-i2s 2901100.i2s: ASoC: PRE_PMU: I2S2 RX event failed: -110
tegra210-i2s 2901100.i2s: timeout: failed to reset I2S for capture
tegra210-i2s 2901100.i2s: ASoC: PRE_PMU: I2S2 TX event failed: -110
The commit d92ad6633fa7 ("ASoC: tegra: Update to use set_fmt_new callback")
regressed I2S functionality on Tegra platforms. Basically it flipped clock
provider and consumer DAI formats. This configures Tegra I2S in consumer
mode by default now and there is none to provide bit clock during loopback
tests. The external codec based tests also fail because both Tegra I2S and
codec I2S get configured in consumer mode.
ASoC core flips the DAI format before calling set_fmt() for CPU DAIs. This
is negated in above commit. Fix this by swapping SND_SOC_DAIFMT_BC_FC and
SND_SOC_DAIFMT_BP_FP switch cases.
Fixes: d92ad6633fa7 ("ASoC: tegra: Update to use set_fmt_new callback")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1655280277-4701-1-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
Fixes: 0d463d016000 ("ASoC: cs35l45: Add driver for Cirrus Logic CS35L45 Smart Amp")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220614131022.778057-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The standard snd_soc_info_volsw() detects if a control is a volume control
and needs to be reported as an integer even if it only has two values by
looking for the string " Volume" in the control name. This results in false
positives if the control has a name like "HP Volume Ramp Switch" since any
" Volume" is matched, not just a trailing one. Fix this by making sure that
we only match at the end of the control name.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220604105407.4055294-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some SoundWire hardware topologies rely on different amplifiers or
capture devices connected on different links. These devices need to be
'aggregated', remain synchronized and be handled as a single logical
device.
In the IPC3 solution, the aggregation for amplifiers was handled by a
firmware 'demux' component. In the IPC4 solution, the demux component is
not needed, the gateway component can handle multiple ALH/DMA transfers
at the same time. This change makes the topology slightly more complicated
in that only one ALH DAI will be connected in the topology with the
gateway. The other DAIs that are part of the 'aggregated' dailink are not
shown in the DAPM graph as connected to the gateway, but they will however
be activated thanks to a feature in soc-dapm.c where events are forwarded
to all DAIs in the dailink (see soc_dapm_stream_event).
The topology also sets the same stream name for all widgets, dais and
dailinks, so a search for the stream name helps identify cases where
SoundWire/ALH aggregation is needed.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220614092630.20144-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently snd_soc_info_volsw() will set a platform_max based on the limit
the control has if one is not already set. This isn't really great, we
shouldn't be modifying the passed in driver data especially in a path like
this which may not ever be executed or where we may execute other callbacks
before this one. Instead make this function leave the data unchanged, and
clarify things a bit by referring to max rather than platform_max within
the function. platform_max is now applied as a limit after working out the
natural maximum value for the control.
This means that platform_max is no longer treated as a direct register
value for controls were min is non-zero. The put() callbacks already
validate on this basis, and there do not appear to be any in tree users
that would be affected.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220603112508.3856519-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Required for more changes for the ops.
|
|
The new IPC4 version is only supported by Intel platforms, iMX, AMD and
MediaTek only uses the standard SOF IPC.
There is no need for these platforms to build kernel support for IPC4 as
it is just dead code for them.
SND_SOC_SOF_IPC3 and SND_SOC_SOF_INTEL_IPC4 is introduced to allow compile
time selection and exclusion of IPC implementations.
To avoid randconfig failures add also support for runtime selection of
the IPC ops in ipc.c based on sdev->pdata->ipc_type
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220614075618.28605-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add sof_ipc_dai_acpdmic_params and tokens to parse dmic channels and
rate params from topology file
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220614075251.21499-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We currently log the initiation of an IPC as well at its success.
[ 3906.106987] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc tx: 0x80010000: GLB_DAI_MSG: CONFIG
[ 3906.107189] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc tx succeeded: 0x80010000: GLB_DAI_MSG: CONFIG
This is overkill in most cases, we already have a message thrown in
case of errors and have tracepoints enabled to check for IPC
duration. The only case where this might be useful is to check if
there is an interleaved IPC RX. Add a flag and only print those logs
if enabled.
In addition, the DMA_POSITION_UPDATE for traces brings limited
information in most cases and pollutes the logs for no good reason.
[ 3906.322256] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc rx: 0x90020000: GLB_TRACE_MSG: DMA_POSITION
[ 3906.322308] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc rx done: 0x90020000: GLB_TRACE_MSG: DMA_POSITION
[ 3906.822261] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc rx: 0x90020000: GLB_TRACE_MSG: DMA_POSITION
[ 3906.822319] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc rx done: 0x90020000: GLB_TRACE_MSG: DMA_POSITION
[ 3907.822261] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc rx: 0x90020000: GLB_TRACE_MSG: DMA_POSITION
[ 3907.822319] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc rx done: 0x90020000: GLB_TRACE_MSG: DMA_POSITION
[ 3908.822251] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc rx: 0x90020000: GLB_TRACE_MSG: DMA_POSITION
[ 3908.822309] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc rx done: 0x90020000: GLB_TRACE_MSG: DMA_POSITION
This information is only helpful when debugging the trace support, not
when using the trace. Add a flag to only print DMA position update
logs if enabled.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220610214601.43005-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add i.MX93 compatible string and specific soc data
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1654840042-7069-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add compatible string "fsl,imx93-mqs" for i.MX93 platform
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1654840042-7069-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The same message was added twice for dai and link_dma, remove the
latter one and add dai name and direction to better understand
problematic sequences.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220610214504.42974-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update this driver to the new direct clock producer/consumer defines. It
appears this driver was added with the inversion taken account of but
still uses the CODEC defines so no inversion of the producer/consumer
is necessary.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220613161552.481337-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Recent updates accidentally updated the clock producer/consumer
specifiers on this device as part of refactoring the CPU side of the DAI
links. However, this device sits on the CODEC side and shouldn't have
been updated. Partially revert the changes keeping the switch to the new
clock terminology but going back to the CODEC defines.
Fixes: 7cc3965fde74 ("ASoC: sunxi: Update to use set_fmt_new callback")
Reported-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220613161552.481337-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Enable on-board rt711 based sound card for MTL RVP.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220610214415.42942-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "wlf,spkvdd-ena" GPIO needed by the bytcr_wm5102 driver
is made available through a gpio-lookup table.
This gpio-lookup table is registered by drivers/mfd/arizona-spi.c, which
may get probed after the bytcr_wm5102 driver.
If the gpio-lookup table has not registered yet then the gpiod_get()
will return -ENOENT. Treat -ENOENT as -EPROBE_DEFER to still keep
things working in this case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220612155652.107310-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Keyon Jie was a key contributor to the Intel ASoC and SOF Intel
drivers, but he's moved on to a different role within Intel. We wish
him all the best in his new endeavors.
Bard Liao, Kai Vehmanen, Ranjani Sridharan and Peter Ujfalusi have
been involved in the Intel multi-maintainer team, it's time to update
the MAINTAINERS entry to reflect their contributions and clarify their
role.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220610214313.42903-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
This set of patches includes changes to add the topology, control and
PCM ops for IPC4. It also includes a couple of patches to set the IPC4
BE DAI trigger ops for SSP/DMIC/HDA type DAI's.
|
|
Currently wcd938x_*_put() unconditionally report that the value of the
control changed, resulting in spurious events being generated. Return 0 in
that case instead as we should. There is still an issue in the compander
control which is a bit more complex.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220603122526.3914942-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As part of retiring the old defines used to specify DAI formats update the
hdmi_codec driver to use the modern names, including the variables in the
struct hdmi_codec_daifmt exported to the DRM drivers.
In updating this I did note that the only use of this information in DRM
drivers is to reject clock provider settings, thinking about what this
hardware is doing I rather suspect that there might not be any hardware
out there which needs the configuration so it may be worth considering
just having hdmi-codec support only clock consumer.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602103029.3498791-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The slimbus mux put operation unconditionally reports a change in value
which means that spurious events are generated. Fix this by exiting early
in that case.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220603124609.4024666-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently in slim_rx_mux_put, an RX channel gets added to a new list
even if it is already in one. This can mess up links and make either
it, the new list head, or both, get linked to the wrong entries.
This can cause an entry to link to itself which in turn ends up
making list_for_each_entry in other functions loop infinitely.
To avoid issues, always remove the RX channel from any list it's in
before adding it to a new list.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20220606152226.149164-1-y.oudjana@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The context save functionality with IPC4 is triggered by sending a message to
the firmware about the pending power down of the primary core by the host.
In order to have this functionality implemented in a clean way we need to
introduce a new IPC level PM ops for core state management and use that instead
of open coding IPC messages here and there.
The first patch updates the ctx store/ctx_restore documentation to clarify that
they are optional.
|
|
prepare callback can be called multiple times, so unprepare the stream
if its already prepared.
Without this DSP is not happy to setting the params on a already
prepared graph.
Fixes: 9b4fe0f1cd79 ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220610144818.511797-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 81da8a0b7975 ("ASoC: remove codec hw_write/control_data") removed
use of hw_write_t in struct snd_soc_codec, but it left type definition.
Fully clean it up.
Fixes: 81da8a0b7975 ("ASoC: remove codec hw_write/control_data")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220610124420.4160986-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use correct type for parsing UUIDs, this eliminates warning present,
when compiling with W=1.
Fixes: 34ae2cd53673 ("ASoC: Intel: avs: Add topology parsing infrastructure")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220610124257.4160658-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
This series handles the race which can result missing the first position update
after the trace is enabled.
In short: the firmware might send the position update (if we have enough
trace data generated) after the dma-trace is enabled by the TRACE_DMA_PARAMS_EXT
message. Depending on scheduling, load, preemption on Linux side we have seen
that occasionally this first position update got missed and we missed reading it
out.
A new state and more strict handling of host_offset can overcome this issue,
making the dtrace more reliable.
|
|
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:
Move all the digital and IIR gains form using SX_TLV to S8_TLV,
these gains are actually 8 bit gains with 7th signed bit and
ranges from -84dB to +40dB
Tested on DB410c with Headset playback
|
|
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Our tests platforms do use realtek codecs, while implementing avs driver
and machine boards for it, we identified quite a lot of problems with
those codec drivers.
|
|
Use pm_runtime_resume_and_get() to replace the pm_runtime_get_sync() and
pm_runtime_put_noidle() pattern.
No functional changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220610071245.26576-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The dmesg log message of "Firmware exception" causes lots of confusion as
the snd_sof_handle_fw_exception() is only called in case of an IPC tx
timeout, where such a message does not make much sense.
To not limit the snd_sof_handle_fw_exception() handler to just one error
case, add a parameter to allow the caller to specify a meaningful message
to be printed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20220610080421.31453-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The new method is called just before the card is registered, providing
an opportune time for machine-level drivers to do some final controls
amending: deactivating individual controls or obtaining control
references for later use.
Some controls can be created by DAPM after 'late_probe' has been called,
hence the need for this new method.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220606191910.16580-5-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clean up in order to use and expose .set_jack callback.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20220609133541.3984886-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clean up in order to use and expose .set_jack callback.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20220609133541.3984886-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Improves readability by making sure the work is always initialized.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20220609133541.3984886-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
move all the digital gains form using SX_TLV to S8_TLV, these gains are
actually 8 bit gains with 7th signed bit and ranges from -84dB to +40dB
rest of the Qualcomm wcd codecs uses these properly.
Fixes: 8c4f021d806a ("ASoC: wcd9335: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220609111901.318047-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
move all the digital gains form using SX_TLV to S8_TLV, these gains are
actually 8 bit gains with 7th signed bit and ranges from -84dB to +40dB
rest of the Qualcomm wcd codecs uses these properly.
Fixes: ef8a4757a6db ("ASoC: msm8916-wcd-digital: Add sidetone support")
Fixes: 150db8c5afa1 ("ASoC: codecs: Add msm8916-wcd digital codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220609111901.318047-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add IPC4 SoundWire blob. It includes a common IPC4 gateway and a multiple
ALH configuration struct which is used for storing the aggregated
SoundWire stream information.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-24-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Define and set the dai_get_clk_op for IPC4.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-23-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The copier config for SSP and DMIC type DAI copiers needs to be parsed
and matched with the runtime hw_config from the NHLT table. Along with
this, also add the change to set the node_id for these copier types.
Co-developed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-22-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new topology IPC op, parse_manifest. Define and set the op for
IPC4 and IPC4.
Co-developed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-21-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a couple of structures for parsing and saving the topology manifest
data.
Co-developed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-20-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Init and save the BIOS NHLT as part of the IPC4 FW data.
Add a kernel module param to override the BIOS NHLT with the NHLT from
the topology. Also, add the ops_free callback for all HDA platforms to
free the NHLT.
Co-developed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-19-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the ops_free callback in struct sof_dev_desc.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-18-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add BE DAI drv ops for IPC4 for DMIC, SSP and HDA type DAI's.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-17-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Expose the sof_ipc4_set_pipeline_state() function as it will be used in
the IPC4-specific BE DAI driver ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-16-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Define and set the dai_config op for IPC4.
Co-developed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-15-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Define and set the route_setup/route_free ops for IPC4.
Co-developed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-14-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Define and set the widget_setup/widget_free ops for IPC4.
Co-developed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220609032643.916882-13-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
