summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-04-07Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds19-86/+264
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bugfixes from Ted Ts'o: "These changes contains a fix for overlayfs interacting with some (badly behaved) dentry code in various file systems. These have been reviewed by Al and the respective file system mtinainers and are going through the ext4 tree for convenience. This also has a few ext4 encryption bug fixes that were discovered in Android testing (yes, we will need to get these sync'ed up with the fs/crypto code; I'll take care of that). It also has some bug fixes and a change to ignore the legacy quota options to allow for xfstests regression testing of ext4's internal quota feature and to be more consistent with how xfs handles this case" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: ignore quota mount options if the quota feature is enabled ext4 crypto: fix some error handling ext4: avoid calling dquot_get_next_id() if quota is not enabled ext4: retry block allocation for failed DIO and DAX writes ext4: add lockdep annotations for i_data_sem ext4: allow readdir()'s of large empty directories to be interrupted btrfs: fix crash/invalid memory access on fsync when using overlayfs ext4 crypto: use dget_parent() in ext4_d_revalidate() ext4: use file_dentry() ext4: use dget_parent() in ext4_file_open() nfs: use file_dentry() fs: add file_dentry() ext4 crypto: don't let data integrity writebacks fail with ENOMEM ext4: check if in-inode xattr is corrupted in ext4_expand_extra_isize_ea()
2016-04-07Merge branch 'for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fix from Sage Weil: "This just fixes a few remaining memory allocations in RBD to use GFP_NOIO instead of GFP_ATOMIC" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: use GFP_NOIO consistently for request allocations
2016-04-07Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds4-4/+40
Pull virtio/qemu fixes from Michael S Tsirkin: "A couple of fixes for virtio and for the new QEMU fw cfg driver" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio: add VIRTIO_CONFIG_S_NEEDS_RESET device status bit MAINTAINERS: add entry for QEMU firmware: qemu_fw_cfg.c: hold ACPI global lock during device access virtio: virtio 1.0 cs04 spec compliance for reset qemu_fw_cfg: don't leak kobj on init error
2016-04-07Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds33-170/+405
Pull drm fixes from Dave Airlie: "This is mostly amdgpu/radeon fixes, and imx related fixes. There is also one one TTM fix, one nouveau fix, and one hdlcd fix. The AMD ones are some fixes for power management after suspend/resume one some GPUs, and some vblank fixes. The IMX ones are for more stricter plane checks and some cleanups. I'm off until Monday, so therre might be some fixes early next week if anyone missed me" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (34 commits) drm/nouveau/tegra: acquire and enable reference clock if needed drm/amdgpu: total vram size also reduces pin size drm/amd/powerplay: add uvd/vce dpm enabling flag default. drm/amd/powerplay: fix issue that resume back, dpm can't work on FIJI. drm/amdgpu: save and restore the firwmware cache part when suspend resume drm/amdgpu: save and restore UVD context with suspend and resume drm/ttm: use phys_addr_t for ttm_bus_placement drm: ARM HDLCD - fix an error code drm: ARM HDLCD - get rid of devm_clk_put() drm/radeon: Only call drm_vblank_on/off between drm_vblank_init/cleanup drm/amdgpu: fence wait old rcu slot drm/amdgpu: fix leaking fence in the pageflip code drm/amdgpu: print vram type rather than just DDR drm/amdgpu/gmc: use proper register for vram type on Fiji drm/amdgpu/gmc: move vram type fetching into sw_init drm/amdgpu: Set vblank_disable_allowed = true drm/radeon: Set vblank_disable_allowed = true drm/amd/powerplay: Need to change boot to performance state in resume. drm/amd/powerplay: add new Fiji function for not setting same ps. drm/amdgpu: check dpm state before pm system fs initialized. ...
2016-04-07RDS: fix congestion map corruption for PAGE_SIZE > 4kshamir rabinovitch1-1/+1
When PAGE_SIZE > 4k single page can contain 2 RDS fragments. If 'rds_ib_cong_recv' ignore the RDS fragment offset in to the page it then read the data fragment as far congestion map update and lead to corruption of the RDS connection far congestion map. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07RDS: memory allocated must be align to 8shamir rabinovitch1-2/+2
Fix issue in 'rds_ib_cong_recv' when accessing unaligned memory allocated by 'rds_page_remainder_alloc' using uint64_t pointer. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07ARM: 8550/1: protect idiv patching against undefined gcc behaviorNicolas Pitre1-0/+2
It was reported that a kernel with CONFIG_ARM_PATCH_IDIV=y stopped booting when compiled with the upcoming gcc 6. Turns out that turning a function address into a writable array is undefined and gcc 6 decided it was OK to omit the store to the first word of the function while still preserving the store to the second word. Even though gcc 6 is now fixed to behave more coherently, it is a mystery that gcc 4 and gcc 5 actually produce wanted code in the kernel. And in fact the reduced test case to illustrate the issue does indeed break with gcc < 6 as well. In any case, let's guard the kernel against undefined compiler behavior by hiding the nature of the array location as suggested by gcc developers. Reference: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70128 Signed-off-by: Nicolas Pitre <nico@linaro.org> Reported-by: Marcin Juszkiewicz <mjuszkiewicz@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: stable@vger.kernel.org # v4.5 Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-04-07ARM: wire up preadv2 and pwritev2 syscallsRussell King3-2/+6
Wire up the preadv2 and pwritev2 syscalls for ARM. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-04-07GRE: Disable segmentation offloads w/ CSUM and we are encapsulated via FOUAlexander Duyck5-4/+29
This patch fixes an issue I found in which we were dropping frames if we had enabled checksums on GRE headers that were encapsulated by either FOU or GUE. Without this patch I was barely able to get 1 Gb/s of throughput. With this patch applied I am now at least getting around 6 Gb/s. The issue is due to the fact that with FOU or GUE applied we do not provide a transport offset pointing to the GRE header, nor do we offload it in software as the GRE header is completely skipped by GSO and treated like a VXLAN or GENEVE type header. As such we need to prevent the stack from generating it and also prevent GRE from generating it via any interface we create. Fixes: c3483384ee511 ("gro: Allow tunnel stacking in the case of FOU/GUE") Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07PM / wakeirq: fix wakeirq setting after wakup re-configuration from sysfsStrashko, Grygorii1-0/+2
Now wakeirq stops working for device if wakeup option for this device will be reconfigured through sysfs, like: echo disabled > /sys/devices/platform/extcon_usb1/power/wakeup echo enabled > /sys/devices/platform/extcon_usb1/power/wakeup Once above set of commands is executed the device's wakeup_source opject will be recreated and dev->power.wakeup->wakeirq field will contain NULL. As result, device_wakeup_arm_wake_irqs() will not arm wakeirq for the affected device. Hece, lets try to fix it in the following way: check for dev->wakeirq field when device_wakeup_attach() is called and if !NULL re-attach wakeirq to the device Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: work around RC6 counter wrapLen Brown1-4/+15
Sometimes the rc6 sysfs counter spontaneously resets, causing turbostat prints a very large number as it tries to calcuate % = 100 * (old - new) / interval When we see (old > new), print ***.**% instead of a bogus huge number. Note that this detection is not fool-proof, as the counter could reset several times and still result in new > old. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: initial KBL supportLen Brown1-0/+14
KBL is similar to SKL Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: initial SKX supportLen Brown1-1/+8
SKX has a lot in common with HSX Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: decode BXT TSC frequency via CPUIDLen Brown1-1/+4
Hard-code BXT ART to 19200MHz, so turbostat --debug can fully enumerate TSC: CPUID(0x15): eax_crystal: 3 ebx_tsc: 186 ecx_crystal_hz: 0 TSC: 1190 MHz (19200000 Hz * 186 / 3 / 1000000) Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: initial BXT supportLen Brown1-0/+9
Broxton has a lot in common with SKL Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: print IRTL MSRsLen Brown2-3/+64
Some processors use the Interrupt Response Time Limit (IRTL) MSR value to describe the maximum IRQ response time latency for deep package C-states. (Though others have the register, but do not use it) Lets print it out to give insight into the cases where it is used. IRTL begain in SNB, with PC3/PC6/PC7, and HSW added PC8/PC9/PC10. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: SGX state should print only if --debugLen Brown1-1/+1
The CPUID.SGX bit was printed, even if --debug was used Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Add KBL supportLen Brown1-0/+2
KBL is similar to SKL Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Add SKX supportLen Brown1-0/+34
SKX is similar to BDX Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Clean up all registered devices on exit.Richard Cochran1-1/+8
This driver registers cpuidle devices when a CPU comes online, but it leaves the registrations in place when a CPU goes offline. The module exit code only unregisters the currently online CPUs, leaving the devices for offline CPUs dangling. This patch changes the driver to clean up all registrations on exit, even those from CPUs that are offline. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Propagate hot plug errors.Richard Cochran1-2/+5
If a cpuidle registration error occurs during the hot plug notifier callback, we should really inform the hot plug machinery instead of just ignoring the error. This patch changes the callback to properly return on error. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Don't overreact to a cpuidle registration failure.Richard Cochran1-1/+1
The helper function, intel_idle_cpu_init, registers one new device with the cpuidle layer. If the registration should fail, that function immediately calls intel_idle_cpuidle_devices_uninit() to unregister every last CPU's device. However, it makes no sense to do so, when called from the hot plug notifier callback. This patch moves the call to intel_idle_cpuidle_devices_uninit() outside of the helper function to the one call site that actually needs to perform the de-registrations. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Setup the timer broadcast only on successful driver load.Richard Cochran1-7/+8
This driver sets the broadcast tick quite early on during probe and does not clean up again in cast of failure. This patch moves the setup call after the registration, placing the on_each_cpu() calls within the global CPU lock region. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Avoid a double free of the per-CPU data.Richard Cochran1-4/+3
The helper function, intel_idle_cpuidle_devices_uninit, frees the globally allocated per-CPU data. However, this function is invoked from the hot plug notifier callback at a time when freeing that data is not safe. If the call to cpuidle_register_driver() should fail (say, due to lack of memory), then the driver will free its per-CPU region. On the *next* CPU_ONLINE event, the driver will happily use the region again and even free it again if the failure repeats. This patch fixes the issue by moving the call to free_percpu() outside of the helper function at the two call sites that actually need to free the per-CPU data. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Fix dangling registration on error path.Richard Cochran1-4/+5
In the module_init() method, if the per-CPU allocation fails, then the active cpuidle registration is not cleaned up. This patch fixes the issue by attempting the allocation before registration, and then cleaning it up again on registration failure. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Fix deallocation order on the driver exit path.Richard Cochran1-3/+3
In the module_exit() method, this driver first frees its per-CPU pointer, then unregisters a callback making use of the pointer. Furthermore, the function, intel_idle_cpuidle_devices_uninit, is racy against CPU hot plugging as it calls for_each_online_cpu(). This patch corrects the issues by unregistering first on the exit path while holding the hot plug lock. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Remove redundant initialization calls.Richard Cochran1-6/+0
The function, intel_idle_cpuidle_driver_init, makes calls on each CPU to auto_demotion_disable() and c1e_promotion_disable(). These calls are redundant, as intel_idle_cpu_init() does the same calls just a bit later on. They are also premature, as the driver registration may yet fail. This patch removes the redundant code. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Fix a helper function's return value.Richard Cochran1-3/+1
The function, intel_idle_cpuidle_driver_init, delivers no error codes at all. This patch changes the function to return 'void' instead of returning zero. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: remove useless return from void function.Richard Cochran1-2/+0
Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07i2c: jz4780: prevent potential division by zeroWolfram Sang1-1/+1
Make sure we don't OOPS in case clock-frequency is set to 0 in a DT. The variable set here is later used as a divisor. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-04-07i2c: mux: demux-pinctrl: Update docs to new sysfs-attributesWolfram Sang1-17/+12
Update the docs according to the recent code changes, too. Fixes: c0c508a418f9da ("i2c: mux: demux-pinctrl: Clean up sysfs attributes") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-04-07Merge tag 'fixes-for-v4.6-rc3' of ↵Greg Kroah-Hartman7-20/+34
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.6-rc3 We have two more fixes to f_midi. It should now behave much better. dwc3-keystone.c has gotten a fix which now allows it to work on keystone device when running in peripheral mode. A similar fix for DMA configuration was made for udc-core, too. We have a new PCI ID for Intel's Broxton platform. DWC3 can run on those platforms as well. And we also have some dwc2 got a fix for dr_mode usage, while renesas controller got 3 important fixes: a NULL pointer deref fix, IRQ <-> DMA race fix, and a fix to prevent a situation where we would queue a request to a disabled endpoint.
2016-04-07iommu/vt-d: Silence an uninitialized variable warningDan Carpenter1-1/+1
My static checker complains that "dma_alias" is uninitialized unless we are dealing with a pci device. This is true but harmless. Anyway, we can flip the condition around to silence the warning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-04-07iommu/rockchip: Fix "is stall active" checkJohn Keeping1-4/+4
Since commit cd6438c5f844 ("iommu/rockchip: Reconstruct to support multi slaves") rk_iommu_is_stall_active() always returns false because the bitwise AND operates on the boolean flag promoted to an integer and a value that is either zero or BIT(2). Explicitly convert the right-hand value to a boolean so that both sides are guaranteed to be either zero or one. rk_iommu_is_paging_enabled() does not suffer from the same problem since RK_MMU_STATUS_PAGING_ENABLED is BIT(0), but let's apply the same change for consistency and to make it clear that it's correct without needing to lookup the value. Fixes: cd6438c5f844 ("iommu/rockchip: Reconstruct to support multi slaves") Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-04-07iommu: Don't overwrite domain pointer when there is no default_domainJoerg Roedel1-1/+2
IOMMU drivers that do not support default domains, but make use of the the group->domain pointer can get that pointer overwritten with NULL on device add/remove. Make sure this can't happen by only overwriting the domain pointer when it is NULL. Cc: stable@vger.kernel.org # v4.4+ Fixes: 1228236de5f9 ('iommu: Move default domain allocation to iommu_group_get_for_dev()') Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-04-07virtio: add VIRTIO_CONFIG_S_NEEDS_RESET device status bitStefan Hajnoczi1-0/+2
The VIRTIO 1.0 specification added the DEVICE_NEEDS_RESET device status bit in "VIRTIO-98: Add DEVICE_NEEDS_RESET". This patch defines the device status bit in the uapi header file so that both the kernel and userspace applications can use it. The bit is currently unused by the virtio guest drivers and vhost. According to the spec "a good implementation will try to recover by issuing a reset". This is not attempted here because it requires auditing the virtio drivers to ensure there are no resource leaks or crashes if the device needs to be reset mid-operation. See "2.1 Device Status Field" in the VIRTIO 1.0 specification for details. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-07MAINTAINERS: add entry for QEMUMichael S. Tsirkin1-0/+7
Gabriel merged support for QEMU FW CFG interface, but there's apparently no official maintainer. It's also possible that this will grow more interfaces in future. I'll happily co-maintain it and handle pull requests together with the rest of the PV stuff I maintain. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu>
2016-04-07firmware: qemu_fw_cfg.c: hold ACPI global lock during device accessGabriel Somlo1-0/+16
Allowing for the future possibility of implementing AML-based (i.e., firmware-triggered) access to the QEMU fw_cfg device, acquire the global ACPI lock when accessing the device on behalf of the guest-side sysfs driver, to prevent any potential race conditions. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-07virtio: virtio 1.0 cs04 spec compliance for resetMichael S. Tsirkin1-3/+8
The spec says: after writing 0 to device_status, the driver MUST wait for a read of device_status to return 0 before reinitializing the device. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2016-04-07qemu_fw_cfg: don't leak kobj on init errorMichael S. Tsirkin1-1/+7
If platform_driver_register fails, we should cleanup fw_cfg_top_ko before exiting. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu>
2016-04-07USB: option: add "D-Link DWM-221 B1" device idBjørn Mork1-0/+2
Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by: Thomas Schäfer <tschaefer@t-online.de> Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-07USB: serial: cp210x: Adding GE Healthcare Device IDMartyn Welch1-0/+1
The CP2105 is used in the GE Healthcare Remote Alarm Box, with the Manufacturer ID of 0x1901 and Product ID of 0x0194. Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-07USB: serial: ftdi_sio: Add support for ICP DAS I-756xU devicesJosh Boyer2-0/+12
A Fedora user reports that the ftdi_sio driver works properly for the ICP DAS I-7561U device. Further, the user manual for these devices instructs users to load the driver and add the ids using the sysfs interface. Add support for these in the driver directly so that the devices work out of the box instead of needing manual configuration. Reported-by: <thesource@mail.ru> CC: stable <stable@vger.kernel.org> Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-06Btrfs: fix file/data loss caused by fsync after rename and new inodeFilipe Manana1-0/+137
If we rename an inode A (be it a file or a directory), create a new inode B with the old name of inode A and under the same parent directory, fsync inode B and then power fail, at log tree replay time we end up removing inode A completely. If inode A is a directory then all its files are gone too. Example scenarios where this happens: This is reproducible with the following steps, taken from a couple of test cases written for fstests which are going to be submitted upstream soon: # Scenario 1 mkfs.btrfs -f /dev/sdc mount /dev/sdc /mnt mkdir -p /mnt/a/x echo "hello" > /mnt/a/x/foo echo "world" > /mnt/a/x/bar sync mv /mnt/a/x /mnt/a/y mkdir /mnt/a/x xfs_io -c fsync /mnt/a/x <power failure happens> The next time the fs is mounted, log tree replay happens and the directory "y" does not exist nor do the files "foo" and "bar" exist anywhere (neither in "y" nor in "x", nor the root nor anywhere). # Scenario 2 mkfs.btrfs -f /dev/sdc mount /dev/sdc /mnt mkdir /mnt/a echo "hello" > /mnt/a/foo sync mv /mnt/a/foo /mnt/a/bar echo "world" > /mnt/a/foo xfs_io -c fsync /mnt/a/foo <power failure happens> The next time the fs is mounted, log tree replay happens and the file "bar" does not exists anymore. A file with the name "foo" exists and it matches the second file we created. Another related problem that does not involve file/data loss is when a new inode is created with the name of a deleted snapshot and we fsync it: mkfs.btrfs -f /dev/sdc mount /dev/sdc /mnt mkdir /mnt/testdir btrfs subvolume snapshot /mnt /mnt/testdir/snap btrfs subvolume delete /mnt/testdir/snap rmdir /mnt/testdir mkdir /mnt/testdir xfs_io -c fsync /mnt/testdir # or fsync some file inside /mnt/testdir <power failure> The next time the fs is mounted the log replay procedure fails because it attempts to delete the snapshot entry (which has dir item key type of BTRFS_ROOT_ITEM_KEY) as if it were a regular (non-root) entry, resulting in the following error that causes mount to fail: [52174.510532] BTRFS info (device dm-0): failed to delete reference to snap, inode 257 parent 257 [52174.512570] ------------[ cut here ]------------ [52174.513278] WARNING: CPU: 12 PID: 28024 at fs/btrfs/inode.c:3986 __btrfs_unlink_inode+0x178/0x351 [btrfs]() [52174.514681] BTRFS: Transaction aborted (error -2) [52174.515630] Modules linked in: btrfs dm_flakey dm_mod overlay crc32c_generic ppdev xor raid6_pq acpi_cpufreq parport_pc tpm_tis sg parport tpm evdev i2c_piix4 proc [52174.521568] CPU: 12 PID: 28024 Comm: mount Tainted: G W 4.5.0-rc6-btrfs-next-27+ #1 [52174.522805] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [52174.524053] 0000000000000000 ffff8801df2a7710 ffffffff81264e93 ffff8801df2a7758 [52174.524053] 0000000000000009 ffff8801df2a7748 ffffffff81051618 ffffffffa03591cd [52174.524053] 00000000fffffffe ffff88015e6e5000 ffff88016dbc3c88 ffff88016dbc3c88 [52174.524053] Call Trace: [52174.524053] [<ffffffff81264e93>] dump_stack+0x67/0x90 [52174.524053] [<ffffffff81051618>] warn_slowpath_common+0x99/0xb2 [52174.524053] [<ffffffffa03591cd>] ? __btrfs_unlink_inode+0x178/0x351 [btrfs] [52174.524053] [<ffffffff81051679>] warn_slowpath_fmt+0x48/0x50 [52174.524053] [<ffffffffa03591cd>] __btrfs_unlink_inode+0x178/0x351 [btrfs] [52174.524053] [<ffffffff8118f5e9>] ? iput+0xb0/0x284 [52174.524053] [<ffffffffa0359fe8>] btrfs_unlink_inode+0x1c/0x3d [btrfs] [52174.524053] [<ffffffffa038631e>] check_item_in_log+0x1fe/0x29b [btrfs] [52174.524053] [<ffffffffa0386522>] replay_dir_deletes+0x167/0x1cf [btrfs] [52174.524053] [<ffffffffa038739e>] fixup_inode_link_count+0x289/0x2aa [btrfs] [52174.524053] [<ffffffffa038748a>] fixup_inode_link_counts+0xcb/0x105 [btrfs] [52174.524053] [<ffffffffa038a5ec>] btrfs_recover_log_trees+0x258/0x32c [btrfs] [52174.524053] [<ffffffffa03885b2>] ? replay_one_extent+0x511/0x511 [btrfs] [52174.524053] [<ffffffffa034f288>] open_ctree+0x1dd4/0x21b9 [btrfs] [52174.524053] [<ffffffffa032b753>] btrfs_mount+0x97e/0xaed [btrfs] [52174.524053] [<ffffffff8108e1b7>] ? trace_hardirqs_on+0xd/0xf [52174.524053] [<ffffffff8117bafa>] mount_fs+0x67/0x131 [52174.524053] [<ffffffff81193003>] vfs_kern_mount+0x6c/0xde [52174.524053] [<ffffffffa032af81>] btrfs_mount+0x1ac/0xaed [btrfs] [52174.524053] [<ffffffff8108e1b7>] ? trace_hardirqs_on+0xd/0xf [52174.524053] [<ffffffff8108c262>] ? lockdep_init_map+0xb9/0x1b3 [52174.524053] [<ffffffff8117bafa>] mount_fs+0x67/0x131 [52174.524053] [<ffffffff81193003>] vfs_kern_mount+0x6c/0xde [52174.524053] [<ffffffff8119590f>] do_mount+0x8a6/0x9e8 [52174.524053] [<ffffffff811358dd>] ? strndup_user+0x3f/0x59 [52174.524053] [<ffffffff81195c65>] SyS_mount+0x77/0x9f [52174.524053] [<ffffffff814935d7>] entry_SYSCALL_64_fastpath+0x12/0x6b [52174.561288] ---[ end trace 6b53049efb1a3ea6 ]--- Fix this by forcing a transaction commit when such cases happen. This means we check in the commit root of the subvolume tree if there was any other inode with the same reference when the inode we are fsync'ing is a new inode (created in the current transaction). Test cases for fstests, covering all the scenarios given above, were submitted upstream for fstests: * fstests: generic test for fsync after renaming directory https://patchwork.kernel.org/patch/8694281/ * fstests: generic test for fsync after renaming file https://patchwork.kernel.org/patch/8694301/ * fstests: add btrfs test for fsync after snapshot deletion https://patchwork.kernel.org/patch/8670671/ Cc: stable@vger.kernel.org Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-04-06Merge branch 'misc-4.6' of ↵Chris Mason8-33/+166
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.6
2016-04-07mailbox: pcc: Don't access an unmapped memory address spaceShanker Donthineni1-2/+2
The acpi_pcc_probe() may end up accessing memory outside of the PCCT table space causing the kernel panic(). Increment the pcct_entry pointer after parsing 'HW-reduced Communications Subspace' to fix the problem. This change also enables the parsing of subtable at index 0. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Acked-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07Merge branch 'drm-fixes-4.6' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie22-78/+210
into drm-fixes Lots of misc bug fixes for radeon and amdgpu and one for ttm. - fix vram info fetching on Fiji and unposted boards - additional vblank fixes from the conversion to drm_vblank_on/off - UVD dGPU suspend and resume fixes - lots of powerplay fixes - fix a fence leak in the pageflip code - ttm fix for platforms where CPU is 32 bit, but physical addresses are >32bits * 'drm-fixes-4.6' of git://people.freedesktop.org/~agd5f/linux: (21 commits) drm/amdgpu: total vram size also reduces pin size drm/amd/powerplay: add uvd/vce dpm enabling flag default. drm/amd/powerplay: fix issue that resume back, dpm can't work on FIJI. drm/amdgpu: save and restore the firwmware cache part when suspend resume drm/amdgpu: save and restore UVD context with suspend and resume drm/ttm: use phys_addr_t for ttm_bus_placement drm/radeon: Only call drm_vblank_on/off between drm_vblank_init/cleanup drm/amdgpu: fence wait old rcu slot drm/amdgpu: fix leaking fence in the pageflip code drm/amdgpu: print vram type rather than just DDR drm/amdgpu/gmc: use proper register for vram type on Fiji drm/amdgpu/gmc: move vram type fetching into sw_init drm/amdgpu: Set vblank_disable_allowed = true drm/radeon: Set vblank_disable_allowed = true drm/amd/powerplay: Need to change boot to performance state in resume. drm/amd/powerplay: add new Fiji function for not setting same ps. drm/amdgpu: check dpm state before pm system fs initialized. drm/amd/powerplay: notify amdgpu whether dpm is enabled or not. drm/amdgpu: Not support disable dpm in powerplay. drm/amdgpu: add an cgs interface to notify amdgpu the dpm state. ...
2016-04-06net: add the AF_KCM entries to family name tablesDexuan Cui1-3/+6
This is for the recent kcm driver, which introduces AF_KCM(41) in b7ac4eb(kcm: Kernel Connection Multiplexor module). Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-06MAINTAINERS: intel-wired-lan list is moderatedJiri Benc1-1/+1
I got the following message: > Your mail to 'Intel-wired-lan' with the subject > > [PATCH net-next] net: intel: remove dead links > > Is being held until the list moderator can review it for approval. > > The reason it is being held: > > Post by non-member to a members-only list Mark the list as moderated. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-06lib/test_bpf: Add additional BPF_ADD testsNaveen N. Rao1-0/+128
Some of these tests proved useful with the powerpc eBPF JIT port due to sign-extended 16-bit immediate loads. Though some of these aspects get covered in other tests, it is better to have explicit tests so as to quickly tag the precise problem. Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-30 07:54:51 +0000