summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2020-10-05block: make bio_crypt_clone() able to failEric Biggers5-29/+42
bio_crypt_clone() assumes its gfp_mask argument always includes __GFP_DIRECT_RECLAIM, so that the mempool_alloc() will always succeed. However, bio_crypt_clone() might be called with GFP_ATOMIC via setup_clone() in drivers/md/dm-rq.c, or with GFP_NOWAIT via kcryptd_io_read() in drivers/md/dm-crypt.c. Neither case is currently reachable with a bio that actually has an encryption context. However, it's fragile to rely on this. Just make bio_crypt_clone() able to fail, analogous to bio_integrity_clone(). Reported-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Satya Tangirala <satyat@google.com> Cc: Satya Tangirala <satyat@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-05block: add a bdget_part helperChristoph Hellwig5-13/+11
All remaining callers of bdget() outside of fs/block_dev.c want to get a reference to the struct block_device for a given struct hd_struct. Add a helper just for that and then mark bdget static. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-05drbd: remove ->this_bdevChristoph Hellwig7-33/+25
DRBD keeps a block device open just to get and set the capacity from it. Switch to primarily using the disk capacity as intended by the block layer, and sync it to the bdev using revalidate_disk_size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-29block-mq: fix comments in blk_mq_queue_tag_busy_iteryangerkun1-3/+1
'f5bbbbe4d635 ("blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter")' introduce a bug what we may sleep between rcu lock. Then '530ca2c9bd69 ("blk-mq: Allow blocking queue tag iter callbacks")' fix it by get request_queue's ref. And 'a9a808084d6a ("block: Remove the synchronize_rcu() call from __blk_mq_update_nr_hw_queues()")' remove the synchronize_rcu in __blk_mq_update_nr_hw_queues. We need update the confused comments in blk_mq_queue_tag_busy_iter. Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-28blk-mq: add cond_resched() in __blk_mq_alloc_rq_maps()Xianting Tian1-1/+3
We found blk_mq_alloc_rq_maps() takes more time in kernel space when testing nvme device hot-plugging. The test and anlysis as below. Debug code, 1, blk_mq_alloc_rq_maps(): u64 start, end; depth = set->queue_depth; start = ktime_get_ns(); pr_err("[%d:%s switch:%ld,%ld] queue depth %d, nr_hw_queues %d\n", current->pid, current->comm, current->nvcsw, current->nivcsw, set->queue_depth, set->nr_hw_queues); do { err = __blk_mq_alloc_rq_maps(set); if (!err) break; set->queue_depth >>= 1; if (set->queue_depth < set->reserved_tags + BLK_MQ_TAG_MIN) { err = -ENOMEM; break; } } while (set->queue_depth); end = ktime_get_ns(); pr_err("[%d:%s switch:%ld,%ld] all hw queues init cost time %lld ns\n", current->pid, current->comm, current->nvcsw, current->nivcsw, end - start); 2, __blk_mq_alloc_rq_maps(): u64 start, end; for (i = 0; i < set->nr_hw_queues; i++) { start = ktime_get_ns(); if (!__blk_mq_alloc_rq_map(set, i)) goto out_unwind; end = ktime_get_ns(); pr_err("hw queue %d init cost time %lld ns\n", i, end - start); } Test nvme hot-plugging with above debug code, we found it totally cost more than 3ms in kernel space without being scheduled out when alloc rqs for all 16 hw queues with depth 1023, each hw queue cost about 140-250us. The cost time will be increased with hw queue number and queue depth increasing. And in an extreme case, if __blk_mq_alloc_rq_maps() returns -ENOMEM, it will try "queue_depth >>= 1", more time will be consumed. [ 428.428771] nvme nvme0: pci function 10000:01:00.0 [ 428.428798] nvme 10000:01:00.0: enabling device (0000 -> 0002) [ 428.428806] pcieport 10000:00:00.0: can't derive routing for PCI INT A [ 428.428809] nvme 10000:01:00.0: PCI INT A: no GSI [ 432.593374] [4688:kworker/u33:8 switch:663,2] queue depth 30, nr_hw_queues 1 [ 432.593404] hw queue 0 init cost time 22883 ns [ 432.593408] [4688:kworker/u33:8 switch:663,2] all hw queues init cost time 35960 ns [ 432.595953] nvme nvme0: 16/0/0 default/read/poll queues [ 432.595958] [4688:kworker/u33:8 switch:700,2] queue depth 1023, nr_hw_queues 16 [ 432.596203] hw queue 0 init cost time 242630 ns [ 432.596441] hw queue 1 init cost time 235913 ns [ 432.596659] hw queue 2 init cost time 216461 ns [ 432.596877] hw queue 3 init cost time 215851 ns [ 432.597107] hw queue 4 init cost time 228406 ns [ 432.597336] hw queue 5 init cost time 227298 ns [ 432.597564] hw queue 6 init cost time 224633 ns [ 432.597785] hw queue 7 init cost time 219954 ns [ 432.597937] hw queue 8 init cost time 150930 ns [ 432.598082] hw queue 9 init cost time 143496 ns [ 432.598231] hw queue 10 init cost time 147261 ns [ 432.598397] hw queue 11 init cost time 164522 ns [ 432.598542] hw queue 12 init cost time 143401 ns [ 432.598692] hw queue 13 init cost time 148934 ns [ 432.598841] hw queue 14 init cost time 147194 ns [ 432.598991] hw queue 15 init cost time 148942 ns [ 432.598993] [4688:kworker/u33:8 switch:700,2] all hw queues init cost time 3035099 ns [ 432.602611] nvme0n1: p1 So use this patch to trigger schedule between each hw queue init, to avoid other threads getting stuck. It is not in atomic context when executing __blk_mq_alloc_rq_maps(), so it is safe to call cond_resched(). Signed-off-by: Xianting Tian <tian.xianting@h3c.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25iocost: consider iocgs with active delays for debt forgivenessTejun Heo1-4/+7
An iocg may have 0 debt but non-zero delay. The current debt forgiveness logic doesn't act on such iocgs. This can lead to unexpected behaviors - an iocg with a little bit of debt will have its delay canceled through debt forgiveness but one w/o any debt but active delay will have to wait out until its delay decays out. This patch updates the debt handling logic so that it treats delays the same as debts. If either debt or delay is active, debt forgiveness logic kicks in and acts on both the same way. Also, avoid turning the debt and delay directly to zero as that can confuse state transitions. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25iocost: add iocg_forgive_debt tracepointTejun Heo2-0/+53
Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25iocost: reimplement debt forgiveness using average usageTejun Heo1-25/+69
Debt forgiveness logic was counting the number of consecutive !busy periods as the trigger condition. While this usually works, it can easily be thrown off by temporary fluctuations especially on configurations w/ short periods. This patch reimplements debt forgiveness so that: * Use the average usage over the forgiveness period instead of counting consecutive periods. * Debt is reduced at around the target rate (1/2 every 100ms) regardless of ioc period duration. * Usage threshold is raised to 50%. Combined with the preceding changes and the switch to average usage, this makes debt forgivness a lot more effective at reducing the amount of unnecessary idleness. * Constants are renamed with DFGV_ prefix. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25iocost: recalculate delay after debt reductionTejun Heo1-1/+3
Debt sets the initial delay duration which is decayed over time. The current debt reduction halved the debt but didn't change the delay. It prevented future debts from increasing delay but didn't do anything to lower the existing delay, limiting the mechanism's ability to reduce unnecessary idling. Reset iocg->delay to 0 after debt reduction so that iocg_kick_waitq() recalculates new delay value based on the reduced debt amount. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25iocost: replace nr_shortages cond in ioc_forgive_debts() with busy_level oneTejun Heo1-8/+5
Debt reduction was blocked if any iocg was short on budget in the past period to avoid reducing debts while some iocgs are saturated. However, this ends up unnecessarily blocking debt reduction due to temporary local imbalances when the device is generally being underutilized, while also failing to block when the underlying device is overwhelmed and the usage becomes low from high latency. Given that debt accumulation mostly happens with swapout bursts which can significantly deteriorate the underlying device's latency response, the current logic is not great. Let's replace it with ioc->busy_level based condition so that we block debt reduction when the underlying device is being saturated. ioc_forgive_debts() call is moved after busy_level determination. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25iocost: factor out ioc_forgive_debts()Tejun Heo1-31/+35
Debt reduction logic is going to be improved and expanded. Factor it out into ioc_forgive_debts() and generalize the comment a bit. No functional change. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25dm: add support for REQ_NOWAIT and enable it for linear targetKonstantin Khlebnikov4-3/+44
Add DM target feature flag DM_TARGET_NOWAIT which advertises that target works with REQ_NOWAIT bios. Add dm_table_supports_nowait() and update dm_table_set_restrictions() to set/clear QUEUE_FLAG_NOWAIT accordingly. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25block: add QUEUE_FLAG_NOWAITMike Snitzer2-4/+7
Add QUEUE_FLAG_NOWAIT to allow a block device to advertise support for REQ_NOWAIT. Bio-based devices may set QUEUE_FLAG_NOWAIT where applicable. Update QUEUE_FLAG_MQ_DEFAULT to include QUEUE_FLAG_NOWAIT. Also update submit_bio_checks() to verify it is set for REQ_NOWAIT bios. Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25vsprintf: use bd_partno in bdev_nameChristoph Hellwig1-2/+2
No need to go through the hd_struct to find the partition number. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25block: use bd_partno in bdevnameChristoph Hellwig1-1/+1
No need to go through the hd_struct to find the partition number. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25target/iblock: fix holder printing in iblock_show_configfs_dev_paramsChristoph Hellwig1-3/+2
bd_contains is never NULL for an open block device. In addition ibd_bd is always set to a block device that was exclusively opened by the target code, so the holder is guranteed to be ib_dev as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25drbd: don't set ->bd_containsChristoph Hellwig1-2/+0
The ->bd_contains field is set by __blkdev_get and drivers have no business manipulating it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25drbd: don't detour through bd_contains for the gendiskChristoph Hellwig2-2/+2
bd_disk is set on all block devices, including those for partitions. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25md: don't detour through bd_contains for the gendiskChristoph Hellwig2-2/+2
bd_disk is set on all block devices, including those for partitions. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25md: compare bd_disk instead of bd_containsChristoph Hellwig1-4/+3
To check for partitions of the same disk bd_contains works as well, but bd_disk is way more obvious. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25block: add a bdev_is_partition helperChristoph Hellwig10-17/+22
Add a littler helper to make the somewhat arcane bd_contains checks a little more obvious. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25Documentation/hdio: fix up obscure bd_contains referencesChristoph Hellwig1-12/+12
bd_contains is an implementation detail and should not be mentioned in a userspace API documentation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bdi: replace BDI_CAP_NO_{WRITEBACK,ACCT_DIRTY} with a single flagChristoph Hellwig10-58/+29
Replace the two negative flags that are always used together with a single positive flag that indicates the writeback capability instead of two related non-capabilities. Also remove the pointless wrappers to just check the flag. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bdi: invert BDI_CAP_NO_ACCT_WBChristoph Hellwig4-13/+8
Replace BDI_CAP_NO_ACCT_WB with a positive BDI_CAP_WRITEBACK_ACCT to make the checks more obvious. Also remove the pointless bdi_cap_account_writeback wrapper that just obsfucates the check. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flagChristoph Hellwig18-36/+33
The BDI_CAP_STABLE_WRITES is one of the few bits of information in the backing_dev_info shared between the block drivers and the writeback code. To help untangling the dependency replace it with a queue flag and a superblock flag derived from it. This also helps with the case of e.g. a file system requiring stable writes due to its own checksumming, but not forcing it on other users of the block device like the swap code. One downside is that we an't support the stable_pages_required bdi attribute in sysfs anymore. It is replaced with a queue attribute which also is writable for easier testing. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24mm: use SWP_SYNCHRONOUS_IO more intelligentlyChristoph Hellwig1-8/+10
There is no point in trying to call bdev_read_page if SWP_SYNCHRONOUS_IO is not set, as the device won't support it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bdi: remove BDI_CAP_SYNCHRONOUS_IOChristoph Hellwig6-20/+14
BDI_CAP_SYNCHRONOUS_IO is only checked in the swap code, and used to decided if ->rw_page can be used on a block device. Just check up for the method instead. The only complication is that zram needs a second set of block_device_operations as it can switch between modes that actually support ->rw_page and those who don't. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bdi: remove BDI_CAP_CGROUP_WRITEBACKChristoph Hellwig3-7/+3
Just checking SB_I_CGROUPWB for cgroup writeback support is enough. Either the file system allocates its own bdi (e.g. btrfs), in which case it is known to support cgroup writeback, or the bdi comes from the block layer, which always supports cgroup writeback. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24block: lift setting the readahead size into the block layerChristoph Hellwig11-68/+24
Drivers shouldn't really mess with the readahead size, as that is a VM concept. Instead set it based on the optimal I/O size by lifting the algorithm from the md driver when registering the disk. Also set bdi->io_pages there as well by applying the same scheme based on max_sectors. To ensure the limits work well for stacking drivers a new helper is added to update the readahead limits from the block limits, which is also called from disk_stack_limits. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24md: update the optimal I/O size on reshapeChristoph Hellwig2-10/+22
The raid5 and raid10 drivers currently update the read-ahead size, but not the optimal I/O size on reshape. To prepare for deriving the read-ahead size from the optimal I/O size make sure it is updated as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bdi: initialize ->ra_pages and ->io_pages in bdi_initChristoph Hellwig10-15/+13
Set up a readahead size by default, as very few users have a good reason to change it. This means code, ecryptfs, and orangefs now set up the values while they were previously missing it, while ubifs, mtd and vboxsf manually set it to 0 to avoid readahead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: David Sterba <dsterba@suse.com> [btrfs] Acked-by: Richard Weinberger <richard@nod.at> [ubifs, mtd] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24aoe: set an optimal I/O sizeChristoph Hellwig1-2/+2
aoe forces a larger readahead size, but any reason to do larger I/O is not limited to readahead. Also set the optimal I/O size, and remove the local constants in favor of just using SZ_2G. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bcache: inherit the optimal I/O sizeChristoph Hellwig1-0/+2
Inherit the optimal I/O size setting just like the readahead window, as any reason to do larger I/O does not apply to just readahead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24drbd: remove dead code in device_to_statisticsChristoph Hellwig1-6/+0
Ever since the switch to blk-mq, a lower device not used for VM writeback will not be marked congested, so the check will never trigger. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24fs: remove the unused SB_I_MULTIROOT flagChristoph Hellwig2-3/+2
The last user of SB_I_MULTIROOT is disappeared with commit f2aedb713c28 ("NFS: Add fs_context support.") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23block: mark blkdev_get staticChristoph Hellwig2-3/+1
There are no users outside the core block code left now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23PM: mm: cleanup swsusp_swap_checkChristoph Hellwig1-6/+4
Use blkdev_get_by_dev instead of bdget + blkdev_get. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23mm: split swap_type_ofChristoph Hellwig4-40/+35
swap_type_of is used for two entirely different purposes: (1) check what swap type a given device/offset corresponds to (2) find the first available swap device that can be written to Mixing both in a single function creates an unreadable mess. Create two separate functions instead, and switch both to pass a dev_t instead of a struct block_device to further simplify the code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23PM: rewrite is_hibernate_resume_dev to not require an inodeChristoph Hellwig3-9/+9
Just check the dev_t to help simplifying the code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23mm: cleanup claim_swapfileChristoph Hellwig1-3/+3
Use blkdev_get_by_dev instead of bdgrab + blkdev_get. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23ocfs2: cleanup o2hb_region_dev_storeChristoph Hellwig1-18/+10
Use blkdev_get_by_dev instead of igrab (aka open coded bdgrab) + blkdev_get. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23dasd: cleanup dasd_scan_partitionsChristoph Hellwig1-11/+4
Use blkdev_get_by_dev instead of bdget_disk + blkdev_get. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23raw: don't keep unopened block device aroundChristoph Hellwig1-32/+19
Turn binding into a normal dev_t as the struct block device doesn't buy us anything and use blkdev_open_by_dev to actually open it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23zram: cleanup backing_dev_storeChristoph Hellwig1-3/+4
Use blkdev_get_by_dev instead of bdgrab + blkdev_get. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23pktcdvd: use blkdev_get_by_dev instead of open coding itChristoph Hellwig1-14/+11
Replace bdget + blkdev_get by blkdev_get_by_dev. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23pktcdvd: remove the if 0'ed pkt_start_recovery functionChristoph Hellwig1-65/+2
Remove code which has been dead since the initial commit. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23block: cleanup blkdev_bszsetChristoph Hellwig1-7/+6
Use blkdev_get_by_dev instead of bdgrab + blkdev_get. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23block: cleanup partition scanning in register_diskChristoph Hellwig1-19/+14
Use blkdev_get_by_dev instead of open coding it using bdget_disk + blkdev_get, and split the code to read the partition table into a separate helper to make it a little more obvious. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23block: move the NEED_PART_SCAN flag to struct gendiskChristoph Hellwig6-14/+13
We can only scan for partitions on the whole disk, so move the flag from struct block_device to struct gendisk. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23block: allow 'chunk_sectors' to be non-power-of-2Mike Snitzer2-9/+13
It is possible, albeit more unlikely, for a block device to have a non power-of-2 for chunk_sectors (e.g. 10+2 RAID6 with 128K chunk_sectors, which results in a full-stripe size of 1280K. This causes the RAID6's io_opt to be advertised as 1280K, and a stacked device _could_ then be made to use a blocksize, aka chunk_sectors, that matches non power-of-2 io_opt of underlying RAID6 -- resulting in stacked device's chunk_sectors being a non power-of-2). Update blk_queue_chunk_sectors() and blk_max_size_offset() to accommodate drivers that need a non power-of-2 chunk_sectors. Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 09:06:23 +0000