summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-10-05media: dt-bindings: Document the Rockchip VPU bindingsEzequiel Garcia1-0/+29
Add devicetree binding documentation for Rockchip Video Processing Unit IP. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-24media: platform: Add Cedrus VPU decoder driverPaul Kocialkowski18-0/+2155
This introduces the Cedrus VPU driver that supports the VPU found in Allwinner SoCs, also known as Video Engine. It is implemented through a V4L2 M2M decoder device and a media device (used for media requests). So far, it only supports MPEG-2 decoding. Since this VPU is stateless, synchronization with media requests is required in order to ensure consistency between frame headers that contain metadata about the frame to process and the raw slice data that is used to generate the frame. This driver was made possible thanks to the long-standing effort carried out by the linux-sunxi community in the interest of reverse engineering, documenting and implementing support for the Allwinner VPU. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: dropped obsolete MEDIA_REQUEST_API from Kconfig] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-24media: dt-bindings: media: Document bindings for the Cedrus VPU driverPaul Kocialkowski1-0/+54
This adds a device-tree binding document that specifies the properties used by the Cedrus VPU driver, as well as examples. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-24media: v4l: Add definition for the Sunxi tiled NV12 formatPaul Kocialkowski3-1/+16
This introduces support for the Sunxi tiled NV12 format, where each component of the YUV frame is divided into macroblocks. Hence, the size of each plane requires specific alignment. The pixels inside each macroblock are coded in linear order (line after line from top to bottom). This tiled NV12 format is used by the video engine on Allwinner platforms: it is the default format for decoded frames (and the only one available in the oldest supported platforms). Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-24media: v4l: Add definitions for MPEG-2 slice format and metadataPaul Kocialkowski9-9/+351
Stateless video decoding engines require both the MPEG-2 slices and associated metadata from the video stream in order to decode frames. This introduces definitions for a new pixel format, describing buffers with MPEG-2 slice data, as well as control structure sfor passing the frame metadata to drivers. This is based on work from both Florent Revest and Hugues Fruchet. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-24media: videobuf2-core: Rework and rename helper for request buffer countPaul Kocialkowski3-13/+11
The helper indicating whether buffers are associated with the request is reworked and renamed to return the number of associated buffer objects. This is useful for drivers that need to check how many buffers are in the request to validate it. Existing users of the helper don't need particular adaptation since the meaning of zero/non-zero remains consistent. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-24media: v4l2-ctrls.c: initialize an error return code with zeroHans Verkuil1-1/+1
Fix this smatch error: drivers/media/v4l2-core/v4l2-ctrls.c:2971 v4l2_ctrl_request_clone() error: uninitialized symbol 'err'. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-24media: v4l2-compat-ioctl32.c: add missing documentation for a fieldHans Verkuil1-0/+1
Fix this sparse warning: drivers/media/v4l2-core/v4l2-compat-ioctl32.c:256: warning: Function parameter or member 'capabilities' not described in 'v4l2_create_buffers32' Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: media-request: update documentationHans Verkuil8-36/+52
Various clarifications and readability improvements based on Laurent Pinchart's review of the documentation. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: media-request: EPERM -> EACCES/EBUSYHans Verkuil9-29/+32
If requests are not supported by the driver, then return EACCES, not EPERM. If you attempt to mix queueing buffers directly and using requests, then EBUSY is returned instead of EPERM: once a specific queueing mode has been chosen the queue is 'busy' if you attempt the other mode (i.e. direct queueing vs via a request). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: v4l2-ctrls: improve media_request_(un)lock_for_updateHans Verkuil1-3/+3
The request reference count was decreased again once a reference to the request object was taken. Postpone this until we finished using the object. In theory I think it is possible that the request_fd can be closed by the application from another thread. In that case when request_put is called the whole request would be freed. It's highly unlikely, but let's just be safe and fix this potential race condition. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: v4l2-ctrls: use media_request_(un)lock_for_accessHans Verkuil1-6/+15
When getting control values from a completed request, we have to protect the request against being re-inited when it is being accessed by calling media_request_(un)lock_for_access. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: media-request: add media_request_(un)lock_for_accessHans Verkuil2-0/+66
Add helper functions to prevent a completed request from being re-inited while it is being accessed. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: vb2: set reqbufs/create_bufs capabilitiesHans Verkuil6-4/+31
Set the capabilities field of v4l2_requestbuffers and v4l2_create_buffers. The various mapping modes were easy, but for signaling the request capability a new 'supports_requests' bitfield was added to videobuf2-core.h (and set in vim2m and vivid). Drivers have to set this bitfield for any queue where requests are supported. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: videodev2.h: add new capabilities for buffer typesHans Verkuil3-4/+65
VIDIOC_REQBUFS and VIDIOC_CREATE_BUFFERS will return capabilities telling userspace what the given buffer type is capable of. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: buffer.rst: only set V4L2_BUF_FLAG_REQUEST_FD for QBUFHans Verkuil1-0/+2
Document that V4L2_BUF_FLAG_REQUEST_FD should only be used with VIDIOC_QBUF and cleared otherwise. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: v4l2-ctrls: return -EACCES if request wasn't completedHans Verkuil2-12/+11
For now (this might be relaxed in the future) we do not allow getting controls from a request that isn't completed. In that case we return -EACCES. Update the documentation accordingly. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: media-request: return -EINVAL for invalid request_fdsHans Verkuil5-22/+20
Instead of returning -ENOENT when a request_fd was not found (VIDIOC_QBUF and VIDIOC_G/S/TRY_EXT_CTRLS), we now return -EINVAL. This is in line with what we do when invalid dmabuf fds are passed to e.g. VIDIOC_QBUF. Also document that EINVAL is returned for invalid m.fd values, we never documented that. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: vivid: add request supportHans Verkuil8-0/+88
Add support for requests to vivid. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: vivid: add mcHans Verkuil2-0/+69
Add support for the media_device to vivid. This is a prerequisite for request support. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: vim2m: support requestsHans Verkuil1-0/+24
Add support for requests to vim2m. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: vim2m: use workqueueHans Verkuil1-15/+10
v4l2_ctrl uses mutexes, so we can't setup a ctrl_handler in interrupt context. Switch to a workqueue instead and drop the timer. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: v4l2-mem2mem: add vb2_m2m_request_queueHans Verkuil2-8/+59
For mem2mem devices we have to make sure that v4l2_m2m_try_schedule() is called whenever a request is queued. We do that by creating a vb2_m2m_request_queue() helper that should be used instead of the 'normal' vb2_request_queue() helper. The m2m helper function will call v4l2_m2m_try_schedule() as needed. In addition we also avoid calling v4l2_m2m_try_schedule() when preparing or queueing a buffer for a request since that is no longer needed. Instead this helper function will do that when the request is actually queued. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-v4l2: refuse qbuf if queue uses requests or vv.Hans Verkuil1-1/+9
Check if the vb2 queue uses requests, and if so refuse to add buffers that are not part of a request. Also check for the reverse: a vb2 queue did not use requests, and an attempt was made to queue a buffer to a request. We might relax this in the future, but for now just return -EPERM in that case. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-core: add uses_requests/qbuf flagsHans Verkuil2-0/+21
Set the first time a buffer from a request is queued to vb2 (uses_requests) or directly queued (uses_qbuf). Cleared when the queue is canceled. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-v4l2: add vb2_request_queue/validate helpersHans Verkuil2-0/+55
The generic vb2_request_validate helper function checks if there are buffers in the request and if so, prepares (validates) all objects in the request. The generic vb2_request_queue helper function queues all buffer objects in the validated request. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-core: add request helper functionsHans Verkuil2-0/+39
Add a new helper function to tell if a request object is a buffer. Add a new helper function that returns true if a media_request contains at least one buffer. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-v4l2: integrate with media requestsHans Verkuil15-32/+148
This implements the V4L2 part of the request support. The main change is that vb2_qbuf and vb2_prepare_buf now have a new media_device pointer. This required changes to several drivers that did not use the vb2_ioctl_qbuf/prepare_buf helper functions. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-core: integrate with media requestsHans Verkuil4-10/+147
Buffers can now be prepared or queued for a request. A buffer is unbound from the request at vb2_buffer_done time or when the queue is cancelled. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-core: embed media_request_objectHans Verkuil1-0/+4
Make vb2_buffer a request object. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: vb2: add init_buffer buffer opHans Verkuil2-0/+6
We need to initialize the request_fd field in struct vb2_v4l2_buffer to -1 instead of the default of 0. So we need to add a new op that is called when struct vb2_v4l2_buffer is allocated. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videodev2.h: Add request_fd field to v4l2_bufferHans Verkuil5-8/+19
When queuing buffers allow for passing the request that should be associated with this buffer. If V4L2_BUF_FLAG_REQUEST_FD is set, then request_fd is used as the file descriptor. If a buffer is stored in a request, but not yet queued to the driver, then V4L2_BUF_FLAG_IN_REQUEST is set. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: vb2: drop VB2_BUF_STATE_PREPARED, use bool prepared/synced insteadHans Verkuil3-20/+44
The PREPARED state becomes a problem with the request API: a buffer could be PREPARED but dequeued, or PREPARED and in state IN_REQUEST. PREPARED is really not a state as such, but more a property of the buffer. So make new 'prepared' and 'synced' bools instead to remember whether the buffer is prepared and/or synced or not. V4L2_BUF_FLAG_PREPARED is only set if the buffer is both synced and prepared and in the DEQUEUED state. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: davinci_vpfe: remove bogus vb2->state checkHans Verkuil1-4/+0
There is no need to check the vb2 state in the buf_prepare callback: it can never be wrong. Since VB2_BUF_STATE_PREPARED will be removed in the next patch we'll remove this unnecessary check (and use of that state) first. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: vb2: store userspace data in vb2_v4l2_bufferHans Verkuil5-39/+72
The userspace-provided plane data needs to be stored in vb2_v4l2_buffer. Currently this information is applied by __fill_vb2_buffer() which is called by the core prepare_buf and qbuf functions, but when using requests these functions aren't called yet since the buffer won't be prepared until the media request is actually queued. In the meantime this information has to be stored somewhere and vb2_v4l2_buffer is a good place for it. The __fill_vb2_buffer callback now just copies the relevant information from vb2_v4l2_buffer into the planes array. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-v4l2: replace if by switch in __fill_vb2_buffer()Hans Verkuil1-7/+14
Replace 'if' statements by a switch in __fill_vb2_buffer() in preparation of the next patch. No other changes. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-v4l2: move __fill_v4l2_buffer() functionHans Verkuil1-132/+132
Move the __fill_v4l2_buffer() to before the vb2_queue_or_prepare_buf() function to prepare for the next two patches. No other changes. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: v4l2-ctrls: add v4l2_ctrl_request_hdl_find/put/ctrl_find functionsHans Verkuil2-1/+73
If a driver needs to find/inspect the controls set in a request then it can use these functions. E.g. to check if a required control is set in a request use this in the req_validate() implementation: int res = -EINVAL; hdl = v4l2_ctrl_request_hdl_find(req, parent_hdl); if (hdl) { if (v4l2_ctrl_request_hdl_ctrl_find(hdl, ctrl_id)) res = 0; v4l2_ctrl_request_hdl_put(hdl); } return res; Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: v4l2-ctrls: support g/s_ext_ctrls for requestsHans Verkuil5-19/+149
The v4l2_g/s_ext_ctrls functions now support control handlers that represent requests. The v4l2_ctrls_find_req_obj() function is responsible for finding the request from the fd. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: v4l2-ctrls: add core request supportHans Verkuil2-6/+381
Integrate the request support. This adds the v4l2_ctrl_request_complete and v4l2_ctrl_request_setup functions to complete a request and (as a helper function) to apply a request to the hardware. It takes care of queuing requests and correctly chaining control values in the request queue. Note that when a request is marked completed it will copy control values to the internal request state. This can be optimized in the future since this is sub-optimal when dealing with large compound and/or array controls. For the initial 'stateless codec' use-case the current implementation is sufficient. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: v4l2-ctrls: use ref in helper instead of ctrlHans Verkuil1-9/+9
The next patch needs the reference to a control instead of the control itself, so change struct v4l2_ctrl_helper accordingly. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: v4l2-ctrls: alloc memory for p_reqHans Verkuil1-4/+16
To store request data the handler_new_ref() allocates memory for it if needed. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: v4l2-ctrls: prepare internal structs for request APIHans Verkuil2-0/+11
Embed and initialize a media_request_object in struct v4l2_ctrl_handler. Add a p_req field to struct v4l2_ctrl_ref that will store the request value. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: v4l2-ctrls: v4l2_ctrl_add_handler: add from_other_devHans Verkuil21-49/+61
Add a 'bool from_other_dev' argument: set to true if the two handlers refer to different devices (e.g. it is true when inheriting controls from a subdev into a main v4l2 bridge driver). This will be used later when implementing support for the request API since we need to skip such controls. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videodev2.h: add request_fd field to v4l2_ext_controlsAlexandre Courbot3-5/+10
If 'which' is V4L2_CTRL_WHICH_REQUEST_VAL, then the 'request_fd' field can be used to specify a request for the G/S/TRY_EXT_CTRLS ioctls. Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: v4l2-dev: lock req_queue_mutexHans Verkuil2-3/+37
We need to serialize streamon/off with queueing new requests. These ioctls may trigger the cancellation of a streaming operation, and that should not be mixed with queuing a new request at the same time. Finally close() needs this lock since that too can trigger the cancellation of a streaming operation. We take the req_queue_mutex here before any other locks since it is a very high-level lock. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: v4l2-device.h: add v4l2_device_supports_requests() helperHans Verkuil1-0/+11
Add a simple helper function that tests if the driver supports the request API. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: media-request: add media_request_object_findHans Verkuil2-0/+53
Add media_request_object_find to find a request object inside a request based on ops and priv values. Objects of the same type (vb2 buffer, control handler) will have the same ops value. And objects that refer to the same 'parent' object (e.g. the v4l2_ctrl_handler that has the current driver state) will have the same priv value. The caller has to call media_request_object_put() for the returned object since this function increments the refcount. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: media-request: add media_request_get_by_fdHans Verkuil1-0/+24
Add media_request_get_by_fd() to find a request based on the file descriptor. The caller has to call media_request_put() for the returned request since this function increments the refcount. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: doc: Add media-request.h header to documentation buildSakari Ailus1-0/+2
media-request.h has been recently added; add it to the documentation build as well. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-22 21:39:40 +0000