summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-01-14vfs: add missing virtual cache flush after editing partial pagesLinus Torvalds1-0/+1
Andrew Morton pointed this out a month ago, and then I completely forgot about it. If we read a partial last page of a block device, we will zero out the end of the page, but since that page can then be mapped into user space, we should also make sure to flush the cache on architectures that have virtual caches. We have the flush_dcache_page() function for this, so use it. Now, in practice this really never matters, because nobody sane uses virtual caches to begin with, and they largely exist on old broken RISC arhitectures. And even if you did run on one of those obsolete CPU's, the whole "mmap and access the last partial page of a block device" behavior probably doesn't actually exist. The normal IO functions (read/write) will never see the zeroed-out part of the page that migth not be coherent in the cache, because they honor the size of the device. So I'm marking this for stable (3.7 only), but I'm not sure anybody will ever care. Pointed-out-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org # 3.7 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-14Merge tag 'sound-3.8' of ↵Linus Torvalds25-153/+255
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Most of commits found here are for ASoC device specific fixes, arizona, cs4271, wm5102, wm2200, etc, in addition to a couple of memory leak fixes in ASoC core. Other than that, regression fixes in HD-audio and USB-audio, and a fix for new Realtek codecs." * tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits) ALSA: usb-audio: Fix NULL dereference by access to non-existing substream ALSA: hda - Add support of new codec ALC284 ALSA: usb-audio: Make ebox44_table static ALSA: hdspm - Fix wordclock status on AES32 Revert "ALSA: hda - Shut up pins at power-saving mode with Conexnat codecs" ALSA: hda - Disable runtime D3 for Intel CPT & co ALSA: pxa27x: fix ac97 warm reset ALSA: pxa27x: fix ac97 cold reset ASoC: wm_adsp: Ensure that block writes are from DMA aligned addresses ASoC: wm2000: Fix sense of speech clarity enable ASoC: wm5100: Remove DSP B and left justified formats ASoC: arizona: Remove DSP B and left justified AIF modes ASoC: wm2200: Remove DSP B and left justified AIF modes ASoC: wm5102: Improve speaker enable performance ASoC: core: fix the memory leak in case of remove_aux_dev() ASoC: core: fix the memory leak in case of device_add() failure ASoC: cs42l52: Catch no-match case in cs42l52_get_clk ASoC: lm49453: Update lm49453_reg_defs values as per LM49453 HW revision-B ASoC: lm49453: Fix adc, mic and sidetone volume ranges ASoC: arizona: Correct FLL source definitions ...
2013-01-14Merge tag 'staging-3.8-rc3' of ↵Linus Torvalds51-983/+1390
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg Kroah-Hartman: "Here are a number of small fixes to staging drivers for your 3.8-rc3 tree. Well, the omapdrm fixes aren't really "small" but they were waiting on a number of other drm patches to go in through the drm tree, and got delayed by my vacation over the holidays. They are totally self-contained, everyone involved have acked them, and they fix issues that people have been having with the driver. Other than that one, it's a bunch of tiny bugfixes for a number of reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'staging-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (36 commits) staging: zram: fix invalid memory references during disk write staging: tidspbridge: use prepare/unprepare on dsp clocks staging: tidspbridge: Fix build breakage due to splitting CM functions. staging: comedi: comedi_test: fix race when cancelling command staging: comedi: Kconfig: COMEDI_NI_AT_A2150 should select COMEDI_FC staging: comedi: prevent auto-unconfig of manually configured devices staging: comedi: fix minimum AO period for NI 625x and NI 628x staging: vme_pio2: fix oops on module unloading staging: speakup: avoid out-of-range access in synth_add() staging: speakup: avoid out-of-range access in synth_init() staging: rtl8192e: Fix failure to check pci_map_single() staging: rtl8187se: Fix failure to check pci_map_single() staging: drm/imx: fix double free bug in error path staging: drm/imx: several bug fixes staging: drm/imx: check return value of ipu_reset() staging: drm/omap: fix flags in dma buf exporting staging: drm/omap: use omapdss low level API staging/fwserial: Update TODO file per reviewer comments staging/fwserial: Limit tx/rx to 1394-2008 spec maximum staging/fwserial: Refine Kconfig help text ...
2013-01-14Merge tag 'usb-3.8-rc3' of ↵Linus Torvalds32-89/+257
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are a bunch of USB fixes for your 3.8-rc3 tree. They all either fix problems that have been reported (like the xhci/hub changes) or add new device ids to existing drivers. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits) usb: ftdi_sio: Crucible Technologies COMET Caller ID - pid added usb: host: ohci-tmio: fix compile warning USB: Add device quirk for Microsoft VX700 webcam USB: ehci-fsl: fix regression on mpc5121e usb: chipidea: Allow disabling streaming not only in udc mode USB: fsl-mph-dr-of: fix regression on mpc5121e USB: select USB_ARCH_HAS_EHCI for MXS USB: hub: handle claim of enabled remote wakeup after reset USB: cdc-acm: Add support for "PSC Scanning, Magellan 800i" USB: option: add Nexpring NP10T terminal id USB: option: add Telekom Speedstick LTE II USB: option: blacklist network interface on ZTE MF880 usb: imx21-hcd: Include missing linux/module.h USB: option: Add new MEDIATEK PID support USB: ehci: make debug port in-use detection functional again USB: usbtest: fix test number in log message xhci: Avoid "dead ports", add roothub port polling. USB: Handle warm reset failure on empty port. USB: Ignore port state until reset completes. USB: Increase reset timeout. ...
2013-01-14Merge tag 'driver-core-3.8-rc3' of ↵Linus Torvalds2-21/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg Kroah-Hartman: "Here are two patches for 3.8-rc3. One removes the __dev* defines from init.h now that all usages of it are gone from your tree. The other fix is for debugfs's paramater that was using the wrong base for the option. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: debugfs: convert gid= argument from decimal, not octal Remove __dev* markings from init.h
2013-01-14Merge tag 'char-misc-3.8-rc3' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg Kroah-Hartman: "Here is a single fix for the mei driver that resolves a reported issue. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'char-misc-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: fix mismatch in mutex unlock-lock in mei_amthif_read()
2013-01-14Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds21-63/+149
Pull drm fixes from Dave Airlie: "Nothing too astounding - nouveau: bunch of regression fixes and oops fixes - radeon: UMS fixes, rn50 fix, dma fix - udl: fix EDID retrieval for large EDIDs." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: udldrmfb: udl_get_edid: drop unneeded i-- udldrmfb: udl_get_edid: usb_control_msg buffer must not be on the stack udldrmfb: Fix EDID not working with monitors with EDID extension blocks drm/nvc0/fb: fix crash when different mutex is used to protect same list drm/nouveau/clock: fix support for more than 2 monitors on nve0 drm/nv50/disp: fix selection of bios script for analog outputs drm/nv17-50: restore fence buffer on resume drm/nouveau: fix blank LVDS screen regression on pre-nv50 cards drm/nouveau: fix nouveau_client allocation failure path drm/nouveau: don't return freed object from nouveau_handle_create drm/nouveau/vm: fix memory corruption when pgt allocation fails drm/nouveau: add locking around instobj list operations drm/nouveau: do not forcibly power on lvds panels drm/nouveau/devinit: ensure legacy vga control is enabled during post radeon/kms: fix dma relocation checking radeon/kms: force rn50 chip to always report connected on analog output drm/radeon: fix error path in kpage allocation drm/radeon: fix a bogus kfree drm/radeon: fix NULL pointer dereference in UMS mode
2013-01-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds56-199/+6654
Pull networking fixes from David Miller: 1) Fix regression allowing IP_TTL setting of zero, fix from Cong Wang. 2) Fix leak regressions in tunap, from Jason Wang. 3) be2net driver always returns IRQ_HANDLED in INTx handler, fix from Sathya Perla. 4) qlge doesn't really support NETIF_F_TSO6, don't set that flag. Fix from Amerigo Wang. 5) Add 802.11ad Atheros wil6210 driver, from Vladimir Kondratiev. 6) Fix MTU calculations in mac80211 layer, from T Krishna Chaitanya. 7) Station info layer of mac80211 needs to use del_timer_sync(), from Johannes Berg. 8) tcp_read_sock() can loop forever, because we don't immediately stop when recv_actor() returns zero. Fix from Eric Dumazet. 9) Fix WARN_ON() in tcp_cleanup_rbuf(). We have to use sk_eat_skb() in tcp_recv_skb() to handle the case where a large GRO packet is split up while it is use by a splice() operation. Fix also from Eric Dumazet. 10) addrconf_get_prefix_route() in ipv6 tests flags incorrectly, it does: if (X && (p->flags & Y) != 0) when it really meant to go: if (X && (p->flags & X) != 0) fix from Romain Kuntz. 11) Fix lost Kconfig dependency for bfin_mac driver hardware timestamping. From Lars-Peter Clausen. 12) Fix regression in handling of RST without ACK in TCP, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (37 commits) be2net: fix unconditionally returning IRQ_HANDLED in INTx tuntap: fix leaking reference count tuntap: forbid calling TUNSETIFF when detached tuntap: switch to use rtnl_dereference() net, wireless: overwrite default_ethtool_ops qlge: remove NETIF_F_TSO6 flag tcp: accept RST without ACK flag net: ethernet: xilinx: Do not use NO_IRQ in axienet net: ethernet: xilinx: Do not use axienet on PPC bnx2x: Allow management traffic after boot from SAN bnx2x: Fix fastpath structures when memory allocation fails bfin_mac: Restore hardware time-stamping dependency on BF518 tun: avoid owner checks on IFF_ATTACH_QUEUE bnx2x: move debugging code before the return tuntap: refuse to re-attach to different tun_struct ipv6: use addrconf_get_prefix_route for prefix route lookup [v2] ipv6: fix the noflags test in addrconf_get_prefix_route tcp: fix splice() and tcp collapsing interaction tcp: splice: fix an infinite loop in tcp_read_sock() net: prevent setting ttl=0 via IP_TTL ...
2013-01-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds7-12/+20
Pull sparc updates from David Miller: 1) Add finit_module syscall entry. 2) Remove stray __dev{init,exit} references, from Sam Ravnborg. Fix up conflicts in the sparc PCI code due to whitespace differences in the __dev{init,exit} removal (which also came in through Greg). * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: remove __devinit, __devexit annotations sparc: Hook up finit_module syscall.
2013-01-13staging: zram: fix invalid memory references during disk writeNitin Gupta1-15/+24
Fixes a bug introduced by commit c8f2f0db1 ("zram: Fix handling of incompressible pages") which caused invalid memory references during disk write. Invalid references could occur in two cases: - Incoming data expands on compression: In this case, reference was made to kunmap()'ed bio page. - Partial (non PAGE_SIZE) write with incompressible data: In this case, reference was made to a kfree()'ed buffer. Fixes bug 50081: https://bugzilla.kernel.org/show_bug.cgi?id=50081 Signed-off-by: Nitin Gupta <ngupta@vflare.org> Cc: stable <stable@vger.kernel.org> Reported-by: Mihail Kasadjikov <hamer.mk@gmail.com> Reported-by: Tomas M <tomas@slax.org> Reviewed-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-14udldrmfb: udl_get_edid: drop unneeded i--Hans de Goede1-1/+0
This is a left-over from when udl_get_edid returned the amount of bytes successfully read, which it no longer does. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-01-14udldrmfb: udl_get_edid: usb_control_msg buffer must not be on the stackHans de Goede1-1/+7
The buffer passed to usb_control_msg may end up in scatter-gather list, and may thus not be on the stack. Having it on the stack usually works on x86, but not on other archs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-01-14udldrmfb: Fix EDID not working with monitors with EDID extension blocksHans de Goede1-0/+8
udldrmfb only reads the main EDID block, and if that advertises extensions the drm_edid code expects them to be present, and starts reading beyond the buffer udldrmfb passes it. Although it may be possible to read more EDID info with the udl we simpy don't know how, and even if trial and error gets it working on one device, that is no guarantee it will work on other revisions. So this patch does a simple fix in the form of patching the EDID info to report 0 extension blocks, this fixes udldrmfb only doing 1024x768 on monitors with EDID extension blocks. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-01-14Merge branch 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie3-9/+20
into drm-next Fixes for UMS mode which has been broken for a while plus an rn50 fix and a dma fix. * 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux: radeon/kms: fix dma relocation checking radeon/kms: force rn50 chip to always report connected on analog output drm/radeon: fix error path in kpage allocation drm/radeon: fix a bogus kfree drm/radeon: fix NULL pointer dereference in UMS mode
2013-01-14Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie17-52/+114
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next Regression fixes since rework mostly. * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nvc0/fb: fix crash when different mutex is used to protect same list drm/nouveau/clock: fix support for more than 2 monitors on nve0 drm/nv50/disp: fix selection of bios script for analog outputs drm/nv17-50: restore fence buffer on resume drm/nouveau: fix blank LVDS screen regression on pre-nv50 cards drm/nouveau: fix nouveau_client allocation failure path drm/nouveau: don't return freed object from nouveau_handle_create drm/nouveau/vm: fix memory corruption when pgt allocation fails drm/nouveau: add locking around instobj list operations drm/nouveau: do not forcibly power on lvds panels drm/nouveau/devinit: ensure legacy vga control is enabled during post
2013-01-13usb: ftdi_sio: Crucible Technologies COMET Caller ID - pid addedTomasz Mloduchowski2-0/+8
Simple fix to add support for Crucible Technologies COMET Caller ID USB decoder - a device containing FTDI USB/Serial converter chip, handling 1200bps CallerID messages decoded from the phone line - adding correct USB PID is sufficient. Tested to apply cleanly and work flawlessly against 3.6.9, 3.7.0-rc8 and 3.8.0-rc3 on both amd64 and x86 arches. Signed-off-by: Tomasz Mloduchowski <q@qdot.me> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-13drm/nvc0/fb: fix crash when different mutex is used to protect same listAleksi Torhamo1-3/+3
Fixes regression introduced in commit 861d2107 "drm/nouveau/fb: merge fb/vram and port to subdev interfaces" nv50_fb_vram_{new,del} functions were changed to use nouveau_subdev->mutex instead of the old nouveau_mm->mutex. nvc0_fb_vram_new still uses the nouveau_mm->mutex, but nvc0 doesn't have its own fb_vram_del function, using nv50_fb_vram_del instead. Because of this, on nvc0 a different mutex ends up being used to protect additions and deletions to the same list. This patch is a -stable candidate for 3.7. Signed-off-by: Aleksi Torhamo <aleksi@torhamo.net> Reported-by: Roy Spliet <r.spliet@student.tudelft.nl> Tested-by: Roy Spliet <r.spliet@student.tudelft.nl> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2013-01-13drm/nouveau/clock: fix support for more than 2 monitors on nve0Aleksi Torhamo2-0/+4
Fixes regression introduced in commit 70790f4f "drm/nouveau/clock: pull in the implementation from all over the place" When code was moved from nv50_crtc_set_clock to nvc0_clock_pll_set, the PLLs it is used for got limited to only the first two VPLLs. nv50_crtc_set_clock was only called to change VPLLs, so it didn't limit what it was used for in any way. Since nvc0_clock_pll_set is used for all PLLs, it has to specify which PLLs the code is used for, and only listed the first two VPLLs. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=58735 This patch is a -stable candidate for 3.7. Signed-off-by: Aleksi Torhamo <aleksi@torhamo.net> Tested-by: Aleksi Torhamo <aleksi@torhamo.net> Tested-by: Sean Santos <quantheory@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2013-01-13drm/nv50/disp: fix selection of bios script for analog outputsMarcin Slusarz1-20/+26
Analog output number was overwritten by value from digital output path. Fix it. Fixes resume from s2ram: https://bugs.freedesktop.org/show_bug.cgi?id=58729 (as stumbled on by J Binder, Pontus Fuchs and me) Fixes blank screen on module load (reported by Sune Mølgaard). Fixes regression from commit 186ecad21c854385823a430b1402053ae7fd59dc ("drm/nv50/disp: move remaining interrupt handling into core"). Reported-by: J Binder <wheel@herr-der-mails.de> Reported-by: Pontus Fuchs <pontus.fuchs@gmail.com> Reported-by: Sune Mølgaard <sune@molgaard.org> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Tested-by: Marcin Slusarz <marcin.slusarz@gmail.com> Tested-by: Sune Mølgaard <sune@molgaard.org> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-01-13drm/nv17-50: restore fence buffer on resumeMarcin Slusarz3-0/+10
Since commit 5e120f6e4b3f35b741c5445dfc755f50128c3c44 "drm/nouveau/fence: convert to exec engine, and improve channel sync" nouveau fence sync implementation for nv17-50 and nvc0+ started to rely on state of fence buffer left by previous sync operation. But as pinned bo's (where fence state is stored) are not saved+restored across suspend/resume, we need to do it manually. nvc0+ was fixed by commit d6ba6d215a538a58f0f0026f0961b0b9125e8042 "drm/nvc0/fence: restore pre-suspend fence buffer context on resume". Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=50121 Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2013-01-13drm/nouveau: fix blank LVDS screen regression on pre-nv50 cardsMarcin Slusarz1-1/+1
Commit 2a44e499 ("drm/nouveau/disp: introduce proper init/fini, separate from create/destroy") started to call display init routines on pre-nv50 hardware on module load. But LVDS init code sets driver state in a way which prevents modesetting code from operating properly. nv04_display_init calls nv04_dfp_restore, which sets encoder->last_dpms to NV_DPMS_CLEARED. drm_crtc_helper_set_mode nv04_dfp_prepare nv04_lvds_dpms(DRM_MODE_DPMS_OFF) nv04_lvds_dpms checks last_dpms mode (which is NV_DPMS_CLEARED) and wrongly assumes it's a "powersaving mode", the new one (DRM_MODE_DPMS_OFF) is too, so it skips calling some crucial lvds scripts. Reported-by: Chris Paulson-Ellis <chris@edesix.com> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2013-01-13drm/nouveau: fix nouveau_client allocation failure pathMarcin Slusarz3-4/+10
Depending on the point of failure, freed object would be returned or memory leak would happen. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-01-13drm/nouveau: don't return freed object from nouveau_handle_createMarcin Slusarz1-1/+4
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-01-13drm/nouveau/vm: fix memory corruption when pgt allocation failsMarcin Slusarz1-1/+3
If we return freed vm, nouveau_drm_open will happily call nouveau_cli_destroy, which will try to free it again. Reported-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-01-13drm/nouveau: add locking around instobj list operationsMarcin Slusarz1-8/+27
Fixes memory corruptions, oopses, etc. when multiple gpuobjs are simultaneously created or destroyed. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2013-01-13drm/nouveau: do not forcibly power on lvds panelsBen Skeggs2-13/+26
This fix was put in place to fix a bug where the eDP panel on certain laptops fails to respond over the aux channel after suspend. It appears that on some systems (Dell M6600, with LVDS panel) there's a very bad interaction with the eDP init table that causes the SOR to get very confused and not drive the panel correctly, leading to bleed. A DPMS off/on cycle is enough to bring it back, but, this will avoid the problem by not touching the panel GPIOs at times we're not meant to. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-01-13drm/nouveau/devinit: ensure legacy vga control is enabled during postBen Skeggs1-1/+0
Fixes ACPI backlight control after suspend on some systems. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-01-12be2net: fix unconditionally returning IRQ_HANDLED in INTxSathya Perla2-9/+21
commit e49cc34f introduced an unconditional IRQ_HANDLED return in be_intx() to workaround Lancer and BE2 HW issues. This is bad as it prevents the kernel from detecting interrupt storms due to broken HW. The BE2/Lancer HW issues are: 1) In Lancer, there is no means for the driver to detect if the interrupt belonged to device, other than counting and notifying events. 2) In Lancer de-asserting INTx takes a while, causing the INTx irq handler to be called multiple times till the de-assert happens. 3) In BE2, we see an occasional interrupt even when EQs are unarmed. Issue (1) can cause the notified events to be orphaned, if NAPI was already running. This patch fixes this issue by scheduling NAPI only if it is not scheduled already. Doing this also takes care of possible events_get() race that may be caused due to issue (2) and (3). Also, IRQ_HANDLED is returned only the first time zero events are detected. (Thanks Ben H. for the feedback and suggestions.) Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-12sparc: remove __devinit, __devexit annotationsSam Ravnborg23-100/+93
__devinit, __devexit annotations are nops - so drop them. Likewise for __devexit_p. Adjusted alignment of arguments when needed. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11tuntap: fix leaking reference countJason Wang1-3/+9
Reference count leaking of both module and sock were found: - When a detached file were closed, its sock refcnt from device were not released, solving this by add the sock_put(). - The module were hold or drop unconditionally in TUNSETPERSIST, which means we if we set the persist flag for N times, we need unset it for another N times. Solving this by only hold or drop an reference when there's a flag change and also drop the reference count when the persist device is deleted. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11tuntap: forbid calling TUNSETIFF when detachedJason Wang1-2/+3
Michael points out that even after Stefan's fix the TUNSETIFF is still allowed to create a new tap device. This because we only check tfile->tun but the tfile->detached were introduced. Fix this by failing early in tun_set_iff() if the file is detached. After this fix, there's no need to do the check again in tun_set_iff(), so this patch removes it. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11tuntap: switch to use rtnl_dereference()Jason Wang1-17/+10
Switch to use rtnl_dereference() instead of the open code, suggested by Eric. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11usb: host: ohci-tmio: fix compile warningFelipe Balbi1-1/+2
Fix the following compile warning: In file included from drivers/usb/host/ohci-hcd.c:1170:0: drivers/usb/host/ohci-tmio.c: In function 'tmio_start_hc': drivers/usb/host/ohci-tmio.c:130:2: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'resource_size_t' [-Wformat] seen on ARM 32-bit builds. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11USB: Add device quirk for Microsoft VX700 webcamAndreas Fleig1-0/+3
Add device quirk for Microsoft Lifecam VX700 v2.0 webcams. Fixes squeaking noise of the microphone. Signed-off-by: Andreas Fleig <andreasfleig@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11USB: ehci-fsl: fix regression on mpc5121eAnatolij Gustschin1-4/+5
mpc5121e doesn't have system interface registers, accessing this register address space cause the machine check exception and a kernel crash: ... Machine check in kernel mode. Caused by (from SRR1=49030): Transfer error ack signal Oops: Machine check, sig: 7 [#1] MPC5121 ADS Modules linked in: NIP: c025fd60 LR: c0265bb4 CTR: 00000000 REGS: df82dac0 TRAP: 0200 Not tainted (3.7.0-rc7-00641-g81e6c91) MSR: 00049030 <EE,ME,IR,DR> CR: 42002024 XER: 20000000 TASK = df824b70[1] 'swapper' THREAD: df82c000 GPR00: 00000000 df82db70 df824b70 df3ed0f0 00000003 00000000 00000000 00000000 GPR08: 00000020 32000000 c03550ec 20000000 22002028 00000000 c0003f5c 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c0423898 c0450000 GPR24: 00000077 00000002 e5086180 1c000c00 e5086000 df33ec00 00000003 df34e000 NIP [c025fd60] ehci_fsl_setup_phy+0xd0/0x354 LR [c0265bb4] ehci_fsl_setup+0x220/0x284 ... Fix it by checking 'have_sysif_regs' flag before register access. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11usb: chipidea: Allow disabling streaming not only in udc modeFabio Estevam1-0/+3
When running a scp transfer using a USB/Ethernet adapter the following crash happens: $ scp test.tar.gz fabio@192.168.1.100:/home/fabio fabio@192.168.1.100's password: test.tar.gz 0% 0 0.0KB/s --:-- ETA ------------[ cut here ]------------ WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x2cc/0x2f0() NETDEV WATCHDOG: eth0 (asix): transmit queue 0 timed out Modules linked in: Backtrace: [<80011c94>] (dump_backtrace+0x0/0x10c) from [<804d3a5c>] (dump_stack+0x18/0x1c) r6:000000ff r5:80412388 r4:80685dc0 r3:80696cc0 [<804d3a44>] (dump_stack+0x0/0x1c) from [<80021868>] (warn_slowpath_common+0x54/0x6c) [<80021814>] (warn_slowpath_common+0x0/0x6c) from [<80021924>] (warn_slowpath_fmt+0x38/0x40) ... Setting SDIS (Stream Disable Mode- bit 4 of USBMODE register) fixes the problem. However, in current code CI13XXX_DISABLE_STREAMING flag is only set in udc mode, so allow disabling streaming also in host mode. Tested on a mx6qsabrelite board. Suggested-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11USB: fsl-mph-dr-of: fix regression on mpc5121eAnatolij Gustschin1-0/+3
fsl-ehci probing fails on mpc5121e: ... ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: Could not get controller version fsl-ehci fsl-ehci.0: can't setup fsl-ehci fsl-ehci.0: USB bus 1 deregistered fsl-ehci fsl-ehci.0: init fsl-ehci.0 fail, -22 fsl-ehci: probe of fsl-ehci.0 failed with error -22 Fix it by returning appropriate version info for mpc5121, too. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11USB: select USB_ARCH_HAS_EHCI for MXSMaxime Ripard1-0/+1
Commit 09f6ffde (USB: EHCI: fix build error by making ChipIdea host a normal EHCI driver) introduced a dependency on USB_EHCI_HCD for the chipidea USB host driver, that in turns depends on USB_ARCH_HAS_EHCI. If this symbol is not set for MXS, the MXS boards are not able to use the chipidea driver anymore. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11net, wireless: overwrite default_ethtool_opsStanislaw Gruszka3-2/+12
Since: commit 2c60db037034d27f8c636403355d52872da92f81 Author: Eric Dumazet <edumazet@google.com> Date: Sun Sep 16 09:17:26 2012 +0000 net: provide a default dev->ethtool_ops wireless core does not correctly assign ethtool_ops. After alloc_netdev*() call, some cfg80211 drivers provide they own ethtool_ops, but some do not. For them, wireless core provide generic cfg80211_ethtool_ops, which is assigned in NETDEV_REGISTER notify call: if (!dev->ethtool_ops) dev->ethtool_ops = &cfg80211_ethtool_ops; But after Eric's commit, dev->ethtool_ops is no longer NULL (on cfg80211 drivers without custom ethtool_ops), but points to &default_ethtool_ops. In order to fix the problem, provide function which will overwrite default_ethtool_ops and use it by wireless core. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11qlge: remove NETIF_F_TSO6 flagAmerigo Wang1-1/+1
It is werid that qlge driver supports NETIF_F_TSO6 but not NETIF_F_IPV6_CSUM. This also causes some kernel warning [1] when VLAN device setups on a qlge interface. I think the qlge hardware doesn't support NETIF_F_IPV6_CSUM, so we have to just remove the NETIF_F_TSO6 flag. After this patch, the TCP/IPv6 traffic becomes normal again, no kernel warnings any more. NOTE: I only tested it on 2.6.32 kernel, even if the upstream kernel could fix this automatically (it is hard to track NETIF* flags), removing it is also safe. 1. https://bugzilla.redhat.com/show_bug.cgi?id=891839 Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11Merge tag 'hwmon-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull a hwmon patch from Guenter Roeck: "Fix build error in vexpress driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (vexpress) Fix build error seen if CONFIG_OF_DEVICE is not set
2013-01-11Merge branch 'akpm' (incoming fixes from Andrew)Linus Torvalds26-78/+227
Merge misc fixes from Andrew Morton: "The audit fixes have been floating around for a while - Al and Eric aren't responding to either myself or Kees so I asked Kees to re-review them and here they are." * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits) lib/rbtree.c: avoid the use of non-static __always_inline MAINTAINERS: Omar had moved mm: compaction: partially revert capture of suitable high-order page linux/audit.h: move ptrace.h include to kernel header kernel/audit.c: avoid negative sleep durations audit: catch possible NULL audit buffers audit: create explicit AUDIT_SECCOMP event type MAINTAINERS: fix a status pattern MAINTAINERS: fix arch/arm/plat-omap/include/plat/omap_hwmod.h mm: thp: acquire the anon_vma rwsem for write during split mm: mmap: annotate vm_lock_anon_vma locking properly for lockdep lockdep, rwsem: provide down_write_nest_lock() arch/mn10300/Kconfig: select CONFIG_GENERIC_ATOMIC64 mm: bootmem: fix free_all_bootmem_core() with odd bitmap alignment mm: use aligned zone start for pfn_to_bitidx calculation fs/exec.c: work around icc miscompilation mm: compaction: fix echo 1 > compact_memory return error issue mm: memblock: fix wrong memmove size in memblock_merge_regions() drivers/video/ssd1307fb.c: fix bit order bug in the byte translation function mm: migrate: check page_count of THP before migrating ...
2013-01-11lib/rbtree.c: avoid the use of non-static __always_inlineMichel Lespinasse2-6/+28
lib/rbtree.c declared __rb_erase_color() as __always_inline void, and then exported it with EXPORT_SYMBOL. This was because __rb_erase_color() must be exported for augmented rbtree users, but it must also be inlined into rb_erase() so that the dummy callback can get optimized out of that call site. (Actually with a modern compiler, none of the dummy callback functions should even be generated as separate text functions). The above usage is legal C, but it was unusual enough for some compilers to warn about it. This change makes things more explicit, with a static __always_inline ____rb_erase_color function for use in rb_erase(), and a separate non-inline __rb_erase_color function for use in rb_erase_augmented call sites. Signed-off-by: Michel Lespinasse <walken@google.com> Reported-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-11MAINTAINERS: Omar had movedChen Gang1-1/+1
Signed-off-by: Chen Gang <gang.chen@asianux.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Omar Ramirez Luna <omar.ramirez@copitl.com> Cc: David Miller <davem@davemloft.net> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-11mm: compaction: partially revert capture of suitable high-order pageMel Gorman5-110/+23
Eric Wong reported on 3.7 and 3.8-rc2 that ppoll() got stuck when waiting for POLLIN on a local TCP socket. It was easier to trigger if there was disk IO and dirty pages at the same time and he bisected it to commit 1fb3f8ca0e92 ("mm: compaction: capture a suitable high-order page immediately when it is made available"). The intention of that patch was to improve high-order allocations under memory pressure after changes made to reclaim in 3.6 drastically hurt THP allocations but the approach was flawed. For Eric, the problem was that page->pfmemalloc was not being cleared for captured pages leading to a poor interaction with swap-over-NFS support causing the packets to be dropped. However, I identified a few more problems with the patch including the fact that it can increase contention on zone->lock in some cases which could result in async direct compaction being aborted early. In retrospect the capture patch took the wrong approach. What it should have done is mark the pageblock being migrated as MIGRATE_ISOLATE if it was allocating for THP and avoided races that way. While the patch was showing to improve allocation success rates at the time, the benefit is marginal given the relative complexity and it should be revisited from scratch in the context of the other reclaim-related changes that have taken place since the patch was first written and tested. This patch partially reverts commit 1fb3f8ca0e92 ("mm: compaction: capture a suitable high-order page immediately when it is made available"). Reported-and-tested-by: Eric Wong <normalperson@yhbt.net> Tested-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-11linux/audit.h: move ptrace.h include to kernel headerMike Frysinger2-1/+1
While the kernel internals want pt_regs (and so it includes linux/ptrace.h), the user version of audit.h does not need it. So move the include out of the uapi version. This avoids issues where people want the audit defines and userland ptrace api. Including both the kernel ptrace and the userland ptrace headers can easily lead to failure. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-11kernel/audit.c: avoid negative sleep durationsAndrew Morton1-13/+23
audit_log_start() performs the same jiffies comparison in two places. If sufficient time has elapsed between the two comparisons, the second one produces a negative sleep duration: schedule_timeout: wrong timeout value fffffffffffffff0 Pid: 6606, comm: trinity-child1 Not tainted 3.8.0-rc1+ #43 Call Trace: schedule_timeout+0x305/0x340 audit_log_start+0x311/0x470 audit_log_exit+0x4b/0xfb0 __audit_syscall_exit+0x25f/0x2c0 sysret_audit+0x17/0x21 Fix it by performing the comparison a single time. Reported-by: Dave Jones <davej@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-11audit: catch possible NULL audit buffersKees Cook4-11/+27
It's possible for audit_log_start() to return NULL. Handle it in the various callers. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Cc: Jeff Layton <jlayton@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Julien Tinnes <jln@google.com> Cc: Will Drewry <wad@google.com> Cc: Steve Grubb <sgrubb@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-11audit: create explicit AUDIT_SECCOMP event typeKees Cook3-4/+14
The seccomp path was using AUDIT_ANOM_ABEND from when seccomp mode 1 could only kill a process. While we still want to make sure an audit record is forced on a kill, this should use a separate record type since seccomp mode 2 introduces other behaviors. In the case of "handled" behaviors (process wasn't killed), only emit a record if the process is under inspection. This change also fixes userspace examination of seccomp audit events, since it was considered malformed due to missing fields of the AUDIT_ANOM_ABEND event type. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Cc: Jeff Layton <jlayton@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Julien Tinnes <jln@google.com> Acked-by: Will Drewry <wad@chromium.org> Acked-by: Steve Grubb <sgrubb@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-11MAINTAINERS: fix a status patternZhang Yanfei1-1/+1
Change MAINTAINED to Maintained. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 18:18:33 +0000