summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-09-19SUNRPC: Generalize the RPC buffer allocation APIChuck Lever7-37/+63
xprtrdma needs to allocate the Call and Reply buffers separately. TBH, the reliance on using a single buffer for the pair of XDR buffers is transport implementation-specific. Transports that want to allocate separate Call and Reply buffers will ignore the "size" argument anyway. Don't bother passing it. The buf_alloc method can't return two pointers. Instead, make the method's return value an error code, and set the rq_buffer pointer in the method itself. This gives call_allocate an opportunity to terminate an RPC instead of looping forever when a permanent problem occurs. If a request is just bogus, or the transport is in a state where it can't allocate resources for any request, there needs to be a way to kill the RPC right there and not loop. This immediately fixes a rare problem in the backchannel send path, which loops if the server happens to send a CB request whose call+reply size is larger than a page (which it shouldn't do yet). One more issue: looks like xprt_inject_disconnect was incorrectly placed in the failure path in call_allocate. It needs to be in the success path, as it is for other call-sites. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19SUNRPC: Refactor rpc_xdr_buf_init()Chuck Lever5-37/+21
Clean up: there is some XDR initialization logic that is common to the forward channel and backchannel. Move it to an XDR header so it can be shared. rpc_rqst::rq_buffer points to a buffer containing big-endian data. Update its annotation as part of the clean up. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19xprtrdma: Eliminate INLINE_THRESHOLD macrosChuck Lever4-15/+6
Clean up: r_xprt is already available everywhere these macros are invoked, so just dereference that directly. RPCRDMA_INLINE_PAD_VALUE is no longer used, so it can simply be removed. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19NFS pnfs data server multipath session trunkingAndy Adamson4-14/+86
Try all multipath addresses for a data server. The first address that successfully connects and creates a session is the DS mount address. All subsequent addresses are tested for session trunking and added as aliases. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19NFS test session trunking with exchange idAndy Adamson2-11/+44
Use an async exchange id call to test for session trunking To conform with RFC 5661 section 18.35.4, the Non-Update on Existing Clientid case, save the exchange id verifier in cl_confirm and use it for the session trunking exhange id test. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19NFS add xprt switch addrs test to match clientAndy Adamson1-1/+4
Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19SUNRPC: rpc_clnt_add_xprt setup function for NFS layerAndy Adamson2-0/+76
Use a setup function to call into the NFS layer to test an rpc_xprt for session trunking so as to not leak the rpc_xprt_switch into the nfs layer. Search for the address in the rpc_xprt_switch first so as not to put an unnecessary EXCHANGE_ID on the wire. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19SUNRPC search xprt switch for sockaddrAndy Adamson4-1/+42
Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19SUNRPC rpc_clnt_xprt_switch_add_xprtAndy Adamson2-0/+8
Give the NFS layer access to the rpc_xprt_switch_add_xprt function Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19SUNRPC rpc_clnt_xprt_switch_putAndy Adamson2-0/+8
Give the NFS layer access to the xprt_switch_put function Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19SUNRPC remove rpc_task_release_client from rpc_task_set_clientAndy Adamson1-1/+0
rpc_task_set_client is only called from rpc_run_task after rpc_new_task and rpc_task_release_client is not needed as the task is new. When called from rpc_new_task, rpc_task_set_client also removed the assigned rpc_xprt which is not desired. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19NFS detect session trunkingAndy Adamson2-0/+92
Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19NFS refactor nfs4_check_serverowner_major_idAndy Adamson1-6/+5
For session trunking, to compare nfs41_exchange_id_res with existing nfs_client Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19NFS refactor nfs4_match_clientidsAndy Adamson1-5/+5
For session trunking, to compare nfs41_exchange_id_res with exiting nfs_client. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19NFS setup async exchange_idAndy Adamson1-81/+134
Testing an rpc_xprt for session trunking should not delay application progress over already established transports. Setup exchange_id to be able to be an async call to test an rpc_xprt for session trunking use. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19NFSv4.x: Add kernel parameter to control the callback serverTrond Myklebust7-6/+33
Add support for the kernel parameter nfs.callback_nr_threads to set the number of threads that will be assigned to the callback channel. Add support for the kernel parameter nfs.nfs.max_session_cb_slots to set the maximum size of the callback channel slot table. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19NFSv4.x: Switch to using svc_set_num_threads() to manage the callback threadsTrond Myklebust2-66/+15
This will allow us to bump the number of callback threads at will. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19NFSv4.x: Fix up the global tracking of the callback serverTrond Myklebust1-5/+9
Ensure that the nfs_callback_info[] array correctly tracks the struct svc_serv. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19SUNRPC: Initialise struct svc_serv backchannel fields during __svc_create()Trond Myklebust2-3/+17
Clean up. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19NFSv4.x: Set up struct svc_serv_ops for the callback channelTrond Myklebust1-18/+39
In order to manage the threads using svc_set_num_threads, we need to fill in a few extra fields. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19pnfs: track multiple layout types in fsinfo structureJeff Layton5-28/+35
Current NFSv4.1/pNFS client assumes that MDS supports only one layout type. While it's true for most existing servers, nevertheless, this can be change in the near future. For now, this patch just plumbs in the ability to track a list of layouts in the fsinfo structure. The existing behavior of the client is preserved, by having it just select the first entry in the list. Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Signed-off-by: Jeff Layton <jlayton@poochiereds.net> Reviewed-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19sunrpc: Remove unnecessary variableAmitoj Kaur Chawla1-2/+1
The variable `err` is not used anywhere and just returns the predefined value `0` at the end of the function. Hence, remove the variable and return 0 explicitly. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-18Linux 4.8-rc7v4.8-rc7Linus Torvalds1-1/+1
2016-09-18Merge tag 'usb-4.8-rc7' of ↵Linus Torvalds3-13/+20
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are two small fixes, and one new device id, for 4.8-rc7 The fixes solve a build error that was reported in your tree for the blackfin arch, and resolve an issue with a number of broken USB devices that reported the wrong interval rate. Included here is also a new device id for the usb-serial driver. All have been in linux-next with no reported issues" * tag 'usb-4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: change bInterval default to 10 ms usb: musb: Fix tusb6010 compile error on blackfin USB: serial: simple: add support for another Infineon flashloader
2016-09-18Merge tag 'fixes-for-linus-v4.8-rc7' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull uaccess fixes from Guenter Roeck: "Two patches fixing problems introduced with copy_from_user changes" * tag 'fixes-for-linus-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: openrisc: fix the fix of copy_from_user() avr32: fix 'undefined reference to `___copy_from_user'
2016-09-18Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds4-15/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A couple of small fixes to x86 perf drivers: - Measure L2 for HW_CACHE* events on AMD - Fix the address filter handling in the intel/pt driver - Handle the BTS disabling at the proper place" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd: Make HW_CACHE_REFERENCES and HW_CACHE_MISSES measure L2 perf/x86/intel/pt: Do validate the size of a kernel address filter perf/x86/intel/pt: Fix kernel address filter's offset validation perf/x86/intel/pt: Fix an off-by-one in address filter configuration perf/x86/intel: Don't disable "intel_bts" around "intel" event batching
2016-09-18Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP build fixlet from Thomas Gleixner: "Add a missing include in cpuhotplug.h" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Include linux/types.h in linux/cpuhotplug.h
2016-09-18Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds3-4/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Two patches from Boris which address a potential deadlock in the atmel irq chip driver" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/atmel-aic: Fix potential deadlock in ->xlate() genirq: Provide irq_gc_{lock_irqsave,unlock_irqrestore}() helpers
2016-09-18openrisc: fix the fix of copy_from_user()Guenter Roeck1-1/+1
Since commit acb2505d0119 ("openrisc: fix copy_from_user()"), copy_from_user() returns the number of bytes requested, not the number of bytes not copied. Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: acb2505d0119 ("openrisc: fix copy_from_user()") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-09-18avr32: fix 'undefined reference to `___copy_from_user'Guenter Roeck1-2/+2
avr32 builds fail with: arch/avr32/kernel/built-in.o: In function `arch_ptrace': (.text+0x650): undefined reference to `___copy_from_user' arch/avr32/kernel/built-in.o:(___ksymtab+___copy_from_user+0x0): undefined reference to `___copy_from_user' kernel/built-in.o: In function `proc_doulongvec_ms_jiffies_minmax': (.text+0x5dd8): undefined reference to `___copy_from_user' kernel/built-in.o: In function `proc_dointvec_minmax_sysadmin': sysctl.c:(.text+0x6174): undefined reference to `___copy_from_user' kernel/built-in.o: In function `ptrace_has_cap': ptrace.c:(.text+0x69c0): undefined reference to `___copy_from_user' kernel/built-in.o:ptrace.c:(.text+0x6b90): more undefined references to `___copy_from_user' follow Fixes: 8630c32275ba ("avr32: fix copy_from_user()") Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-09-17fix iov_iter_fault_in_readable()Al Viro2-23/+3
... by turning it into what used to be multipages counterpart Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-17Merge tag 'mmc-v4.8-rc6' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds4-18/+33
Pull MMC fixes from Ulf Hansson: "MMC host: - omap/omap_hsmmc: Initialize dma_slave_config to avoid random data - sdhci-st: Handle interconnect clock" * tag 'mmc-v4.8-rc6' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: omap: Initialize dma_slave_config to avoid random data in it's fields mmc: omap_hsmmc: Initialize dma_slave_config to avoid random data mmc: sdhci-st: Handle interconnect clock dt-bindings: mmc: sdhci-st: Mention the discretionary "icn" clock
2016-09-17Merge tag 'powerpc-4.8-6' of ↵Linus Torvalds3-9/+29
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Fixes for code merged this cycle: - Fix restore of SPRs upon wake up from hypervisor state loss from Gautham R Shenoy - Fix the state of root PE from Gavin Shan - Detach from PE on releasing PCI device from Gavin Shan - Fix size of NUM_CPU_FTR_KEYS on 32-bit - Fix missed TCE invalidations that should fallback to OPAL" * tag 'powerpc-4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv/pci: Fix missed TCE invalidations that should fallback to OPAL powerpc/powernv: Detach from PE on releasing PCI device powerpc/powernv: Fix the state of root PE powerpc/kernel: Fix size of NUM_CPU_FTR_KEYS on 32-bit powerpc/powernv: Fix restore of SPRs upon wake up from hypervisor state loss
2016-09-16Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds3-20/+42
Pull cifs fixes from Steve French: "Small set of cifs fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: Move check for prefix path to within cifs_get_root() Compare prepaths when comparing superblocks Fix memory leaks in cifs_do_mount()
2016-09-16Merge tag 'nfsd-4.8-2' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-2/+3
Pull nfsd bugfix from Bruce Fields: "Fix a memory corruption bug that I introduced in 4.7" * tag 'nfsd-4.8-2' of git://linux-nfs.org/~bfields/linux: svcauth_gss: Revert 64c59a3726f2 ("Remove unnecessary allocation")
2016-09-16Merge tag 'drm-fixes-for-4.8-rc6' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds11-23/+61
Pull drm fixes from Dave Airlie: "Two sets of i915 fixes, one set of vc4 crasher fixes, and a couple of atmel fixes. Nothing too out there at this stage, though I think some people are holidaying so it's been quiet enough" * tag 'drm-fixes-for-4.8-rc6' of git://people.freedesktop.org/~airlied/linux: drm/i915: Ignore OpRegion panel type except on select machines Revert "drm/i915/psr: Make idle_frames sensible again" drm/i915: Restore lost "Initialized i915" welcome message drm/vc4: mark vc4_bo_cache_purge() static drm/i915: Add GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE to SNB drm/i915: disable 48bit full PPGTT when vGPU is active drm/i915: enable vGPU detection for all drm/atmel-hlcdc: Make ->reset() implementation static drm: atmel-hlcdc: Fix vertical scaling drm/vc4: Allow some more signals to be packed with uniform resets. drm/i915/dvo: Remove dangling call to drm_encoder_cleanup()
2016-09-16Merge tag 'pm-4.8-rc7' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "More annotations of tracepoints in the runtime PM framework to prevent RCU from complaining when that code is invoked from the idle path (Paul McKenney)" * tag 'pm-4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / runtime: Use _rcuidle for runtime suspend tracepoints
2016-09-17Merge tag 'drm-vc4-fixes-2016-09-14' of https://github.com/anholt/linux into ↵Dave Airlie2-3/+9
drm-fixes This pull request brings in a fix for crashes in X on VC4. * tag 'drm-vc4-fixes-2016-09-14' of https://github.com/anholt/linux: drm/vc4: mark vc4_bo_cache_purge() static drm/vc4: Allow some more signals to be packed with uniform resets.
2016-09-17Merge tag 'drm-intel-fixes-2016-09-15' of ↵Dave Airlie3-7/+39
git://anongit.freedesktop.org/drm-intel into drm-fixes i915 fixes from Jani. * tag 'drm-intel-fixes-2016-09-15' of git://anongit.freedesktop.org/drm-intel: drm/i915: Ignore OpRegion panel type except on select machines Revert "drm/i915/psr: Make idle_frames sensible again" drm/i915: Restore lost "Initialized i915" welcome message
2016-09-16Merge tag 'for-linus' of ↵Linus Torvalds15-80/+189
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "Round three of 4.8 rc fixes. This is likely the last rdma pull request this cycle. The new rxe driver had a few issues (you probably saw the boot bot bug report) and they should be addressed now. There are a couple other fixes here, mainly mlx4. There are still two outstanding issues that need resolved but I don't think their fix will make this kernel cycle. Summary: - Various fixes to rdmavt, ipoib, mlx5, mlx4, rxe" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/rdmavt: Don't vfree a kzalloc'ed memory region IB/rxe: Fix kmem_cache leak IB/rxe: Fix race condition between requester and completer IB/rxe: Fix duplicate atomic request handling IB/rxe: Fix kernel panic in udp_setup_tunnel IB/mlx5: Set source mac address in FTE IB/mlx5: Enable MAD_IFC commands for IB ports only IB/mlx4: Diagnostic HW counters are not supported in slave mode IB/mlx4: Use correct subnet-prefix in QP1 mads under SR-IOV IB/mlx4: Fix code indentation in QP1 MAD flow IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOV IB/ipoib: Don't allow MC joins during light MC flush IB/rxe: fix GFP_KERNEL in spinlock context
2016-09-16Merge tag 'fixes-for-linus' of ↵Linus Torvalds25-93/+102
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Here are a couple of bugfixes for v4.8-rc. Most of them have actually been around for a while this time but for some reason didn't get applied early on. The shmobile regulator fix is the only one that isn't completely obvious. Device tree changes: - archtimer interrupts must be level triggered (multiple platforms) - fix for USB and MMC clocks on STiH410 - fix split DT repository in case of raspberry-pi 3 - a new use of skeleton.dtsi on arm64 has crept in after that was removed. defconfig updates: - xilinx vdma has a new Kconfig symbol name - keystone requires CONFIG_NOP_USB_XCEIV since v4.8-rc1 Code fixes: - fix regulator quirk on shmobile - suspend-to-ram regression on EXYNOS Maintainer updates: - Javier Martinez Canillas is now a reviewer for Samsung EXYNOS" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: keystone: defconfig: Fix USB configuration arm64: dts: Fix broken architected timer interrupt trigger ARM: multi_v7_defconfig: update XILINX_VDMA ARM64: dts: bcm: Use a symlink to R-Pi dtsi files from arch=arm ARM: dts: Remove use of skeleton.dtsi from bcm283x.dtsi ARM: dts: STiH407-family: Provide interconnect clock for consumption in ST SDHCI ARM: dts: STiH410: Handle interconnect clock required by EHCI/OHCI (USB) ARM: shmobile: fix regulator quirk for Gen2 ARM: EXYNOS: Clear OF_POPULATED flag from PMU node in IRQ init callback MAINTAINERS: Add myself as reviewer for Samsung Exynos support
2016-09-16Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds16-101/+114
Pull ARM fixes from Russell King: "Most of this update are fixes primarily discovered from testing on the older StrongARM 1110 and PXA systems, as a result of recent interest from several people in these platforms: - Locomo interrupt handling incorrectly stores the handler data in the chip's private data slot: when Locomo is combined with an interrupt controller who's chip uses the chip private data, this leads to an oops. - SA1111 was missing a call to clk_disable() to clean up after a failed probe. - SA1111 and PCMCIA suspend/resume was broken: The PCMCIA "ds" layer was using the legacy bus suspend/resume methods, which the core PM code is no longer calling as a result of device_pm_check_callbacks() introduced in commit aa8e54b559479 ("PM / sleep: Go direct_complete if driver has no callbacks"). SA1111 was broken due to changes to PCMCIA which makes PCMCIA suspend itself later than the SA1111 code expects, and resume before the SA1111 code has initialised access to the pcmcia sub-device. - the default SA1111 interrupt mask polarity got messed up when it was converted to use a dynamic interrupt base number for its interrupts. - fix platform_get_irq() error code propagation, which was causing problems on platforms where the interrupt may not be available at probe time in DT setups. - fix the lack of clock to PCMCIA code on PXA platforms, which was omitted in conversions of PXA to CCF. - fix an oops in the PXA PCMCIA code caused by a previous commit not realising that Lubbock is different from the rest of the PXA PCMCIA drivers. - ensure that SA1111 low-level PCMCIA drivers propagate their error codes to the main probe function, rather than the driver silently accepting a failure. - fix the sa11xx debugfs reporting of timing information, which always indicated zero due to the clock being a factor of 1000 out. - fix the polarity of the status change signal reported from the sockets. Lastly, one ARM specific commit from Stefan Agner fixing the LPAE cache attributes" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: pxa/lubbock: add pcmcia clock ARM: locomo: fix locomo irq handling ARM: 8612/1: LPAE: initialize cache policy correctly ARM: sa1111: fix missing clk_disable() ARM: sa1111: fix pcmcia suspend/resume ARM: sa1111: fix pcmcia interrupt mask polarity ARM: sa1111: fix error code propagation in sa1111_probe() pcmcia: lubbock: fix sockets configuration pcmcia: sa1111: fix propagation of lowlevel board init return code pcmcia: soc_common: fix SS_STSCHG polarity pcmcia: sa11xx_base: add units to the timing information pcmcia: sa11xx_base: fix reporting of timing information pcmcia: ds: fix suspend/resume
2016-09-16IB/rdmavt: Don't vfree a kzalloc'ed memory regionColin Ian King1-1/+1
The userspace memory region 'mr' is allocated with kzalloc in __rvt_alloc_mr however it is incorrectly being freed with vfree in __rvt_free_mr. Fix this by using kfree to free it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/rxe: Fix kmem_cache leakYonatan Cohen1-0/+13
Decrement qp reference when handling error path in completer to prevent kmem_cache leak. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/rxe: Fix race condition between requester and completerYonatan Cohen1-13/+44
rxe_requester() is sending a pkt with rxe_xmit_packet() and then calls rxe_update() to update the wqe and qp's psn values. But sometimes the response is received before the requester had time to update the wqe in which case the completer acts on errornous wqe values. This fix updates the wqe and qp before actually sending the request and rolls back when xmit fails. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/rxe: Fix duplicate atomic request handlingYonatan Cohen1-5/+6
When handling ack for atomic opcodes like "fetch&add" or "cmp&swp", the method send_atomic_ack() saves the ack before sending it, in case it gets lost and never reach the requester. In which case the method duplicate_request() will need to find it using the duplicated request.psn. But send_atomic_ack() used a wrong psn value and thus the above ack was never found. This fix uses the ack.psn to locate the ack in case its needed. This fix also copies the ack packet to the skb's control buffer since duplicate_request() will need it when calling rxe_xmit_packet() Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/rxe: Fix kernel panic in udp_setup_tunnelYonatan Cohen3-34/+51
Disable creation of a UDP socket for ipv6 when CONFIG_IPV6 is not enabeld. Since udp_sock_create6() returns 0 when CONFIG_IPV6 is not set [ 46.888632] IP: [<c220705a>] setup_udp_tunnel_sock+0x6/0x4f [ 46.891355] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 [ 46.893918] Oops: 0002 [#1] PREEMPT [ 46.896014] CPU: 0 PID: 1 Comm: swapper Not tainted 4.7.0-rc4-00001-g8700e3e #1 [ 46.900280] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 46.904905] task: cf06c040 ti: cf05e000 task.ti: cf05e000 [ 46.907854] EIP: 0060:[<c220705a>] EFLAGS: 00210246 CPU: 0 [ 46.911137] EIP is at setup_udp_tunnel_sock+0x6/0x4f [ 46.914070] EAX: 00000044 EBX: 00000001 ECX: cf05fef0 EDX: ca8142e0 [ 46.917236] ESI: c2c4505b EDI: cf05fef0 EBP: cf05fed0 ESP: cf05fed0 [ 46.919836] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 46.922046] CR0: 80050033 CR2: 000001fc CR3: 02cec000 CR4: 000006b0 [ 46.924550] Stack: [ 46.926014] cf05ff10 c1fd4657 ca8142e0 0000000a 00000000 00000000 0000b712 00000008 [ 46.931274] 00000000 6bb5bd01 c1fd48de 00000000 00000000 cf05ff1c 00000000 00000000 [ 46.936122] cf05ff1c c1fd4bdf 00000000 cf05ff28 c2c4507b ffffffff cf05ff88 c2bf1c74 [ 46.942350] Call Trace: [ 46.944403] [<c1fd4657>] rxe_setup_udp_tunnel+0x8f/0x99 [ 46.947689] [<c1fd48de>] ? net_to_rxe+0x4e/0x4e [ 46.950567] [<c1fd4bdf>] rxe_net_init+0xe/0xa4 [ 46.953147] [<c2c4507b>] rxe_module_init+0x20/0x4c [ 46.955448] [<c2bf1c74>] do_one_initcall+0x89/0x113 [ 46.957797] [<c2bf15eb>] ? set_debug_rodata+0xf/0xf [ 46.959966] [<c2bf1dbc>] ? kernel_init_freeable+0xbe/0x15b [ 46.962262] [<c2bf1ddc>] kernel_init_freeable+0xde/0x15b [ 46.964418] [<c232eb54>] kernel_init+0x8/0xd0 [ 46.966618] [<c2333122>] ret_from_kernel_thread+0xe/0x24 [ 46.969592] [<c232eb4c>] ? rest_init+0x6f/0x6f Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx5: Set source mac address in FTEMaor Gottlieb1-0/+7
Set the source mac address in the FTE when L2 specification is provided. Fixes: 038d2ef87572 ('IB/mlx5: Add flow steering support') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx5: Enable MAD_IFC commands for IB ports onlyNoa Osherovich1-1/+3
MAD_IFC command is supported only for physical functions (PF) and when physical port is IB. The proposed fix enforces it. Fixes: d603c809ef91 ("IB/mlx5: Fix decision on using MAD_IFC") Reported-by: David Chang <dchang@suse.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx4: Diagnostic HW counters are not supported in slave modeKamal Heib1-0/+3
Modify the mlx4_ib_diag_counters() to avoid the following error in the hypervisor when the slave tries to query the hardware counters in SR-IOV mode. mlx4_core 0000:81:00.0: Unknown command:0x30 accepted from slave:1 Fixes: 3f85f2aaabf7 ("IB/mlx4: Add diagnostic hardware counters") Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-27 02:09:10 +0000