summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-09-03Merge tag 'mips_5.15' of ↵Linus Torvalds53-783/+346
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - converted Pistachio platform to use MIPS generic kernel - fixes and cleanups * tag 'mips_5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (29 commits) MIPS: Malta: fix alignment of the devicetree buffer MIPS: ingenic: Unconditionally enable clock of CPU #0 MIPS: mscc: ocelot: mark the phy-mode for internal PHY ports MIPS: mscc: ocelot: disable all switch ports by default MAINTAINERS: adjust PISTACHIO SOC SUPPORT after its retirement MIPS: Return true/false (not 1/0) from bool functions MIPS: generic: Return true/false (not 1/0) from bool functions MIPS: Make a alias for pistachio_defconfig MIPS: Retire MACH_PISTACHIO MIPS: config: generic: Add config for Marduk board pinctrl: pistachio: Make it as an option phy: pistachio-usb: Depend on MIPS || COMPILE_TEST clocksource/drivers/pistachio: Make it selectable for MIPS clk: pistachio: Make it selectable for generic MIPS kernel MIPS: DTS: Pistachio add missing cpc and cdmm MIPS: generic: Allow generating FIT image for Marduk board MIPS: locking/atomic: Fix atomic{_64,}_sub_if_positive MIPS: loongson2ef: don't build serial.o unconditionally MIPS: Replace deprecated CPU-hotplug functions. MIPS: Alchemy: Fix spelling contraction "cant" -> "can't" ...
2021-09-03Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds10-40/+58
Pull OpenRISC updates from Stafford Horne: "A few cleanups and compiler warning fixes for OpenRISC. Also, this includes dts and defconfig updates to enable Ethernet on OpenRISC/Litex FPGA SoC's now that the LiteEth driver has gone upstream" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc/litex: Update defconfig openrisc/litex: Add ethernet device openrisc/litex: Update uart address openrisc: Fix compiler warnings in setup openrisc: rename or32 code & comments to or1k openrisc: don't printk() unconditionally
2021-09-03Merge tag 'livepatching-for-5.15' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching update from Petr Mladek. * tag 'livepatching-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch: Replace deprecated CPU-hotplug functions.
2021-09-03Merge tag 'iommu-updates-v5.15' of ↵Linus Torvalds43-607/+2034
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - New DART IOMMU driver for Apple Silicon M1 chips - Optimizations for iommu_[map/unmap] performance - Selective TLB flush support for the AMD IOMMU driver to make it more efficient on emulated IOMMUs - Rework IOVA setup and default domain type setting to move more code out of IOMMU drivers and to support runtime switching between certain types of default domains - VT-d Updates from Lu Baolu: - Update the virtual command related registers - Enable Intel IOMMU scalable mode by default - Preset A/D bits for user space DMA usage - Allow devices to have more than 32 outstanding PRs - Various cleanups - ARM SMMU Updates from Will Deacon: SMMUv3: - Minor optimisation to avoid zeroing struct members on CMD submission - Increased use of batched commands to reduce submission latency - Refactoring in preparation for ECMDQ support SMMUv2: - Fix races when probing devices with identical StreamIDs - Optimise walk cache flushing for Qualcomm implementations - Allow deep sleep states for some Qualcomm SoCs with shared clocks - Various smaller optimizations, cleanups, and fixes * tag 'iommu-updates-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (85 commits) iommu/io-pgtable: Abstract iommu_iotlb_gather access iommu/arm-smmu: Fix missing unlock on error in arm_smmu_device_group() iommu/vt-d: Add present bit check in pasid entry setup helpers iommu/vt-d: Use pasid_pte_is_present() helper function iommu/vt-d: Drop the kernel doc annotation iommu/vt-d: Allow devices to have more than 32 outstanding PRs iommu/vt-d: Preset A/D bits for user space DMA usage iommu/vt-d: Enable Intel IOMMU scalable mode by default iommu/vt-d: Refactor Kconfig a bit iommu/vt-d: Remove unnecessary oom message iommu/vt-d: Update the virtual command related registers iommu: Allow enabling non-strict mode dynamically iommu: Merge strictness and domain type configs iommu: Only log strictness for DMA domains iommu: Expose DMA domain strictness via sysfs iommu: Express DMA strictness via the domain type iommu/vt-d: Prepare for multiple DMA domain types iommu/arm-smmu: Prepare for multiple DMA domain types iommu/amd: Prepare for multiple DMA domain types iommu: Introduce explicit type for non-strict DMA domains ...
2021-09-03Merge branch 'stable/for-linus-5.15' of ↵Linus Torvalds16-136/+469
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb updates from Konrad Rzeszutek Wilk: "A new feature called restricted DMA pools. It allows SWIOTLB to utilize per-device (or per-platform) allocated memory pools instead of using the global one. The first big user of this is ARM Confidential Computing where the memory for DMA operations can be set per platform" * 'stable/for-linus-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: (23 commits) swiotlb: use depends on for DMA_RESTRICTED_POOL of: restricted dma: Don't fail device probe on rmem init failure of: Move of_dma_set_restricted_buffer() into device.c powerpc/svm: Don't issue ultracalls if !mem_encrypt_active() s390/pv: fix the forcing of the swiotlb swiotlb: Free tbl memory in swiotlb_exit() swiotlb: Emit diagnostic in swiotlb_exit() swiotlb: Convert io_default_tlb_mem to static allocation of: Return success from of_dma_set_restricted_buffer() when !OF_ADDRESS swiotlb: add overflow checks to swiotlb_bounce swiotlb: fix implicit debugfs declarations of: Add plumbing for restricted DMA pool dt-bindings: of: Add restricted DMA pool swiotlb: Add restricted DMA pool initialization swiotlb: Add restricted DMA alloc/free support swiotlb: Refactor swiotlb_tbl_unmap_single swiotlb: Move alloc_size to swiotlb_find_slots swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing swiotlb: Update is_swiotlb_active to add a struct device argument swiotlb: Update is_swiotlb_buffer to add a struct device argument ...
2021-09-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds171-1729/+3525
Merge misc updates from Andrew Morton: "173 patches. Subsystems affected by this series: ia64, ocfs2, block, and mm (debug, pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap, bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock, oom-kill, migration, ksm, percpu, vmstat, and madvise)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits) mm/madvise: add MADV_WILLNEED to process_madvise() mm/vmstat: remove unneeded return value mm/vmstat: simplify the array size calculation mm/vmstat: correct some wrong comments mm/percpu,c: remove obsolete comments of pcpu_chunk_populated() selftests: vm: add COW time test for KSM pages selftests: vm: add KSM merging time test mm: KSM: fix data type selftests: vm: add KSM merging across nodes test selftests: vm: add KSM zero page merging test selftests: vm: add KSM unmerge test selftests: vm: add KSM merge test mm/migrate: correct kernel-doc notation mm: wire up syscall process_mrelease mm: introduce process_mrelease system call memblock: make memblock_find_in_range method private mm/mempolicy.c: use in_task() in mempolicy_slab_node() mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies mm/mempolicy: advertise new MPOL_PREFERRED_MANY mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY ...
2021-09-03mm/madvise: add MADV_WILLNEED to process_madvise()zhangkui1-0/+1
There is a usecase in Android that an app process's memory is swapped out by process_madvise() with MADV_PAGEOUT, such as the memory is swapped to zram or a backing device. When the process is scheduled to running, like switch to foreground, multiple page faults may cause the app dropped frames. To reduce the problem, System Management Software can read-ahead memory of the process immediately when the app switches to forground. Calling process_madvise() with MADV_WILLNEED can meet this need. Link: https://lkml.kernel.org/r/20210804082010.12482-1-zhangkui@oppo.com Signed-off-by: zhangkui <zhangkui@oppo.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/vmstat: remove unneeded return valueMiaohe Lin1-6/+2
The return value of pagetypeinfo_showfree and pagetypeinfo_showblockcount are unused now. Remove them. Link: https://lkml.kernel.org/r/20210715122911.15700-4-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/vmstat: simplify the array size calculationMiaohe Lin1-5/+3
We can replace the array_num * sizeof(array[0]) with sizeof(array) to simplify the code. Link: https://lkml.kernel.org/r/20210715122911.15700-3-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/vmstat: correct some wrong commentsMiaohe Lin1-6/+1
Patch series "Cleanup for vmstat". This series contains cleanups to remove unneeded return value, correct wrong comment and simplify the array size calculation. More details can be found in the respective changelogs. This patch (of 3): Correct wrong fls(mem+1) to fls(mem)+1 and remove the duplicated comment with quiet_vmstat(). Link: https://lkml.kernel.org/r/20210715122911.15700-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210715122911.15700-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/percpu,c: remove obsolete comments of pcpu_chunk_populated()Jing Xiangfeng1-3/+0
Commit b239f7daf553 ("percpu: set PCPU_BITMAP_BLOCK_SIZE to PAGE_SIZE") removed the parameter 'for_alloc', so remove this comment. Link: https://lkml.kernel.org/r/1630576043-21367-1-git-send-email-jingxiangfeng@huawei.com Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03selftests: vm: add COW time test for KSM pagesZhansaya Bagdauletkyzy1-3/+83
Since merged pages are copied every time they need to be modified, the write access time is different between shared and non-shared pages. Add ksm_cow_time() function which evaluates latency of these COW breaks. First, 4000 pages are allocated and the time, required to modify 1 byte in every other page, is measured. After this, the pages are merged into 2000 pairs and in each pair, 1 page is modified (i.e. they are decoupled) to detect COW breaks. The time needed to break COW of merged pages is then compared with performance of non-shared pages. The test is run as follows: ./ksm_tests -C The output: Total size: 15 MiB Not merged pages: Total time: 0.002185489 s Average speed: 3202.945 MiB/s Merged pages: Total time: 0.004386872 s Average speed: 1595.670 MiB/s Link: https://lkml.kernel.org/r/1d03ee0d1b341959d4b61672c6401d498bff5652.1629386192.git.zhansayabagdaulet@gmail.com Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03selftests: vm: add KSM merging time testZhansaya Bagdauletkyzy1-4/+70
Patch series "add KSM performance tests", v3. Extend KSM self tests with a performance benchmark. These tests are not part of regular regression testing, as they are mainly intended to be used by developers making changes to the memory management subsystem. This patch (of 2): Add ksm_merge_time() function to determine speed and time needed for merging. The total spent time is shown in seconds while speed is in MiB/s. User must specify the size of duplicated memory area (in MiB) before running the test. The test is run as follows: ./ksm_tests -P -s 100 The output: Total size: 100 MiB Total time: 0.201106786 s Average speed: 497.248 MiB/s Link: https://lkml.kernel.org/r/cover.1629386192.git.zhansayabagdaulet@gmail.com Link: https://lkml.kernel.org/r/318b946ac80cc9205c89d0962048378f7ce0705b.1629386192.git.zhansayabagdaulet@gmail.com Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm: KSM: fix data typeZhansaya Bagdauletkyzy1-4/+4
ksm_stable_node_chains_prune_millisecs is declared as int, but in stable__node_chains_prune_millisecs_store(), it can store values up to UINT_MAX. Change its type to unsigned int. Link: https://lkml.kernel.org/r/20210806111351.GA71845@asus Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03selftests: vm: add KSM merging across nodes testZhansaya Bagdauletkyzy3-3/+119
Add check_ksm_numa_merge() function to test that pages in different NUMA nodes are being handled properly. First, two duplicate pages are allocated in two separate NUMA nodes using the libnuma library. Since there is one unique page in each node, with merge_across_nodes = 0, there won't be any shared pages. If merge_across_nodes is set to 1, the pages will be treated as usual duplicate pages and will be merged. If NUMA config is not enabled or the number of NUMA nodes is less than two, then the test is skipped. The test is run as follows: ./ksm_tests -N Link: https://lkml.kernel.org/r/071c17b5b04ebb0dfeba137acc495e5dd9d2a719.1626252248.git.zhansayabagdaulet@gmail.com Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03selftests: vm: add KSM zero page merging testZhansaya Bagdauletkyzy2-3/+99
Add check_ksm_zero_page_merge() function to test that empty pages are being handled properly. For this, several zero pages are allocated and merged using madvise. If use_zero_pages is enabled, the pages must be shared with the special kernel zero pages; otherwise, they are merged as usual duplicate pages. The test is run as follows: ./ksm_tests -Z Link: https://lkml.kernel.org/r/6d0caab00d4bdccf5e3791cb95cf6dfd5eb85e45.1626252248.git.zhansayabagdaulet@gmail.com Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03selftests: vm: add KSM unmerge testZhansaya Bagdauletkyzy2-5/+85
Add check_ksm_unmerge() function to verify that KSM is properly unmerging shared pages. For this, two duplicate pages are merged first and then their contents are modified. Since they are not identical anymore, the pages must be unmerged and the number of merged pages has to be 0. The test is run as follows: ./ksm_tests -U Link: https://lkml.kernel.org/r/c0f55420440d704d5b094275b4365aa1b2ad46b5.1626252248.git.zhansayabagdaulet@gmail.com Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03selftests: vm: add KSM merge testZhansaya Bagdauletkyzy4-0/+324
Patch series "add KSM selftests". Introduce selftests to validate the functionality of KSM. The tests are run on private anonymous pages. Since some KSM tunables are modified, their starting values are saved and restored after testing. At the start, run is set to 2 to ensure that only test pages will be merged (we assume that no applications make madvise syscalls in the background). If KSM config not enabled, all tests will be skipped. This patch (of 4): Add check_ksm_merge() function to check the basic merging feature of KSM. First, some number of identical pages are allocated and the MADV_MERGEABLE advice is given to merge these pages. Then, pages_shared and pages_sharing values are compared with the expected numbers using assert_ksm_pages_count() function. The number of pages can be changed using -p option. Link: https://lkml.kernel.org/r/cover.1626252248.git.zhansayabagdaulet@gmail.com Link: https://lkml.kernel.org/r/90287685c13300972ea84de93d1f3f900373f9fe.1626252248.git.zhansayabagdaulet@gmail.com Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/migrate: correct kernel-doc notationRandy Dunlap1-1/+1
Use the expected "Return:" format to prevent a kernel-doc warning. mm/migrate.c:1157: warning: Excess function parameter 'returns' description in 'next_demotion_node' Link: https://lkml.kernel.org/r/20210808203151.10632-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm: wire up syscall process_mreleaseSuren Baghdasaryan21-2/+38
Split off from prev patch in the series that implements the syscall. Link: https://lkml.kernel.org/r/20210809185259.405936-2-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Jan Engelhardt <jengelh@inai.de> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm: introduce process_mrelease system callSuren Baghdasaryan1-0/+70
In modern systems it's not unusual to have a system component monitoring memory conditions of the system and tasked with keeping system memory pressure under control. One way to accomplish that is to kill non-essential processes to free up memory for more important ones. Examples of this are Facebook's OOM killer daemon called oomd and Android's low memory killer daemon called lmkd. For such system component it's important to be able to free memory quickly and efficiently. Unfortunately the time process takes to free up its memory after receiving a SIGKILL might vary based on the state of the process (uninterruptible sleep), size and OPP level of the core the process is running. A mechanism to free resources of the target process in a more predictable way would improve system's ability to control its memory pressure. Introduce process_mrelease system call that releases memory of a dying process from the context of the caller. This way the memory is freed in a more controllable way with CPU affinity and priority of the caller. The workload of freeing the memory will also be charged to the caller. The operation is allowed only on a dying process. After previous discussions [1, 2, 3] the decision was made [4] to introduce a dedicated system call to cover this use case. The API is as follows, int process_mrelease(int pidfd, unsigned int flags); DESCRIPTION The process_mrelease() system call is used to free the memory of an exiting process. The pidfd selects the process referred to by the PID file descriptor. (See pidfd_open(2) for further information) The flags argument is reserved for future use; currently, this argument must be specified as 0. RETURN VALUE On success, process_mrelease() returns 0. On error, -1 is returned and errno is set to indicate the error. ERRORS EBADF pidfd is not a valid PID file descriptor. EAGAIN Failed to release part of the address space. EINTR The call was interrupted by a signal; see signal(7). EINVAL flags is not 0. EINVAL The memory of the task cannot be released because the process is not exiting, the address space is shared with another live process or there is a core dump in progress. ENOSYS This system call is not supported, for example, without MMU support built into Linux. ESRCH The target process does not exist (i.e., it has terminated and been waited on). [1] https://lore.kernel.org/lkml/20190411014353.113252-3-surenb@google.com/ [2] https://lore.kernel.org/linux-api/20201113173448.1863419-1-surenb@google.com/ [3] https://lore.kernel.org/linux-api/20201124053943.1684874-3-surenb@google.com/ [4] https://lore.kernel.org/linux-api/20201223075712.GA4719@lst.de/ Link: https://lkml.kernel.org/r/20210809185259.405936-1-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: David Rientjes <rientjes@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Roman Gushchin <guro@fb.com> Cc: Rik van Riel <riel@surriel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Jan Engelhardt <jengelh@inai.de> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03memblock: make memblock_find_in_range method privateMike Rapoport16-117/+81
There are a lot of uses of memblock_find_in_range() along with memblock_reserve() from the times memblock allocation APIs did not exist. memblock_find_in_range() is the very core of memblock allocations, so any future changes to its internal behaviour would mandate updates of all the users outside memblock. Replace the calls to memblock_find_in_range() with an equivalent calls to memblock_phys_alloc() and memblock_phys_alloc_range() and make memblock_find_in_range() private method of memblock. This simplifies the callers, ensures that (unlikely) errors in memblock_reserve() are handled and improves maintainability of memblock_find_in_range(). Link: https://lkml.kernel.org/r/20210816122622.30279-1-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Acked-by: Kirill A. Shutemov <kirill.shtuemov@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [ACPI] Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Nick Kossifidis <mick@ics.forth.gr> [riscv] Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/mempolicy.c: use in_task() in mempolicy_slab_node()Vasily Averin1-1/+1
Obsoleted in_intrrupt() include task context with disabled BH, it's better to use in_task() instead. Link: https://lkml.kernel.org/r/984ee771-4834-21da-801f-c15c18ddf4d1@virtuozzo.com Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/mempolicy: unify the create() func for bind/interleave/prefer-many policiesFeng Tang1-20/+4
As they all do the same thing: sanity check and save nodemask info, create one mpol_new_nodemask() to reduce redundancy. Link: https://lkml.kernel.org/r/1627970362-61305-6-git-send-email-feng.tang@intel.com Signed-off-by: Feng Tang <feng.tang@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ben Widawsky <ben.widawsky@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/mempolicy: advertise new MPOL_PREFERRED_MANYBen Widawsky2-10/+12
Adds a new mode to the existing mempolicy modes, MPOL_PREFERRED_MANY. MPOL_PREFERRED_MANY will be adequately documented in the internal admin-guide with this patch. Eventually, the man pages for mbind(2), get_mempolicy(2), set_mempolicy(2) and numactl(8) will also have text about this mode. Those shall contain the canonical reference. NUMA systems continue to become more prevalent. New technologies like PMEM make finer grain control over memory access patterns increasingly desirable. MPOL_PREFERRED_MANY allows userspace to specify a set of nodes that will be tried first when performing allocations. If those allocations fail, all remaining nodes will be tried. It's a straight forward API which solves many of the presumptive needs of system administrators wanting to optimize workloads on such machines. The mode will work either per VMA, or per thread. [Michal Hocko: refine kernel doc for MPOL_PREFERRED_MANY] Link: https://lore.kernel.org/r/20200630212517.308045-13-ben.widawsky@intel.com Link: https://lkml.kernel.org/r/1627970362-61305-5-git-send-email-feng.tang@intel.com Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANYBen Widawsky2-5/+37
Implement the missing huge page allocation functionality while obeying the preferred node semantics. This is similar to the implementation for general page allocation, as it uses a fallback mechanism to try multiple preferred nodes first, and then all other nodes. To avoid adding too many "#ifdef CONFIG_NUMA" check, add a helper function in mempolicy.h to check whether a mempolicy is MPOL_PREFERRED_MANY. [akpm@linux-foundation.org: fix compiling issue when merging with other hugetlb patch] [Thanks to 0day bot for catching the !CONFIG_NUMA compiling issue] [mhocko@suse.com: suggest to remove the #ifdef CONFIG_NUMA check] [ben.widawsky@intel.com: add helpers to avoid ifdefs] Link: https://lore.kernel.org/r/20200630212517.308045-12-ben.widawsky@intel.com Link: https://lkml.kernel.org/r/1627970362-61305-4-git-send-email-feng.tang@intel.com Link: https://lkml.kernel.org/r/20210809024430.GA46432@shbuild999.sh.intel.com [nathan@kernel.org: initialize page to NULL in alloc_buddy_huge_page_with_mpol()] Link: https://lkml.kernel.org/r/20210810200632.3812797-1-nathan@kernel.org Link: https://lore.kernel.org/r/20200630212517.308045-12-ben.widawsky@intel.com Link: https://lkml.kernel.org/r/1627970362-61305-4-git-send-email-feng.tang@intel.com Link: https://lkml.kernel.org/r/20210809024430.GA46432@shbuild999.sh.intel.com Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Co-developed-by: Feng Tang <feng.tang@intel.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/memplicy: add page allocation function for MPOL_PREFERRED_MANY policyFeng Tang1-0/+30
The semantics of MPOL_PREFERRED_MANY is similar to MPOL_PREFERRED, that it will first try to allocate memory from the preferred node(s), and fallback to all nodes in system when first try fails. Add a dedicated function alloc_pages_preferred_many() for it just like for 'interleave' policy, which will be used by 2 general memoory allocation APIs: alloc_pages() and alloc_pages_vma() Link: https://lore.kernel.org/r/20200630212517.308045-9-ben.widawsky@intel.com Link: https://lkml.kernel.org/r/1627970362-61305-3-git-send-email-feng.tang@intel.com Suggested-by: Michal Hocko <mhocko@suse.com> Originally-by: Ben Widawsky <ben.widawsky@intel.com> Co-developed-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/mempolicy: add MPOL_PREFERRED_MANY for multiple preferred nodesDave Hansen2-14/+60
Patch series "Introduce multi-preference mempolicy", v7. This patch series introduces the concept of the MPOL_PREFERRED_MANY mempolicy. This mempolicy mode can be used with either the set_mempolicy(2) or mbind(2) interfaces. Like the MPOL_PREFERRED interface, it allows an application to set a preference for nodes which will fulfil memory allocation requests. Unlike the MPOL_PREFERRED mode, it takes a set of nodes. Like the MPOL_BIND interface, it works over a set of nodes. Unlike MPOL_BIND, it will not cause a SIGSEGV or invoke the OOM killer if those preferred nodes are not available. Along with these patches are patches for libnuma, numactl, numademo, and memhog. They still need some polish, but can be found here: https://gitlab.com/bwidawsk/numactl/-/tree/prefer-many It allows new usage: `numactl -P 0,3,4` The goal of the new mode is to enable some use-cases when using tiered memory usage models which I've lovingly named. 1a. The Hare - The interconnect is fast enough to meet bandwidth and latency requirements allowing preference to be given to all nodes with "fast" memory. 1b. The Indiscriminate Hare - An application knows it wants fast memory (or perhaps slow memory), but doesn't care which node it runs on. The application can prefer a set of nodes and then xpu bind to the local node (cpu, accelerator, etc). This reverses the nodes are chosen today where the kernel attempts to use local memory to the CPU whenever possible. This will attempt to use the local accelerator to the memory. 2. The Tortoise - The administrator (or the application itself) is aware it only needs slow memory, and so can prefer that. Much of this is almost achievable with the bind interface, but the bind interface suffers from an inability to fallback to another set of nodes if binding fails to all nodes in the nodemask. Like MPOL_BIND a nodemask is given. Inherently this removes ordering from the preference. > /* Set first two nodes as preferred in an 8 node system. */ > const unsigned long nodes = 0x3 > set_mempolicy(MPOL_PREFER_MANY, &nodes, 8); > /* Mimic interleave policy, but have fallback *. > const unsigned long nodes = 0xaa > set_mempolicy(MPOL_PREFER_MANY, &nodes, 8); Some internal discussion took place around the interface. There are two alternatives which we have discussed, plus one I stuck in: 1. Ordered list of nodes. Currently it's believed that the added complexity is nod needed for expected usecases. 2. A flag for bind to allow falling back to other nodes. This confuses the notion of binding and is less flexible than the current solution. 3. Create flags or new modes that helps with some ordering. This offers both a friendlier API as well as a solution for more customized usage. It's unknown if it's worth the complexity to support this. Here is sample code for how this might work: > // Prefer specific nodes for some something wacky > set_mempolicy(MPOL_PREFER_MANY, 0x17c, 1024); > > // Default > set_mempolicy(MPOL_PREFER_MANY | MPOL_F_PREFER_ORDER_SOCKET, NULL, 0); > // which is the same as > set_mempolicy(MPOL_DEFAULT, NULL, 0); > > // The Hare > set_mempolicy(MPOL_PREFER_MANY | MPOL_F_PREFER_ORDER_TYPE, NULL, 0); > > // The Tortoise > set_mempolicy(MPOL_PREFER_MANY | MPOL_F_PREFER_ORDER_TYPE_REV, NULL, 0); > > // Prefer the fast memory of the first two sockets > set_mempolicy(MPOL_PREFER_MANY | MPOL_F_PREFER_ORDER_TYPE, -1, 2); > This patch (of 5): The NUMA APIs currently allow passing in a "preferred node" as a single bit set in a nodemask. If more than one bit it set, bits after the first are ignored. This single node is generally OK for location-based NUMA where memory being allocated will eventually be operated on by a single CPU. However, in systems with multiple memory types, folks want to target a *type* of memory instead of a location. For instance, someone might want some high-bandwidth memory but do not care about the CPU next to which it is allocated. Or, they want a cheap, high capacity allocation and want to target all NUMA nodes which have persistent memory in volatile mode. In both of these cases, the application wants to target a *set* of nodes, but does not want strict MPOL_BIND behavior as that could lead to OOM killer or SIGSEGV. So add MPOL_PREFERRED_MANY policy to support the multiple preferred nodes requirement. This is not a pie-in-the-sky dream for an API. This was a response to a specific ask of more than one group at Intel. Specifically: 1. There are existing libraries that target memory types such as https://github.com/memkind/memkind. These are known to suffer from SIGSEGV's when memory is low on targeted memory "kinds" that span more than one node. The MCDRAM on a Xeon Phi in "Cluster on Die" mode is an example of this. 2. Volatile-use persistent memory users want to have a memory policy which is targeted at either "cheap and slow" (PMEM) or "expensive and fast" (DRAM). However, they do not want to experience allocation failures when the targeted type is unavailable. 3. Allocate-then-run. Generally, we let the process scheduler decide on which physical CPU to run a task. That location provides a default allocation policy, and memory availability is not generally considered when placing tasks. For situations where memory is valuable and constrained, some users want to allocate memory first, *then* allocate close compute resources to the allocation. This is the reverse of the normal (CPU) model. Accelerators such as GPUs that operate on core-mm-managed memory are interested in this model. A check is added in sanitize_mpol_flags() to not permit 'prefer_many' policy to be used for now, and will be removed in later patch after all implementations for 'prefer_many' are ready, as suggested by Michal Hocko. [mhocko@kernel.org: suggest to refine policy_node/policy_nodemask handling] Link: https://lkml.kernel.org/r/1627970362-61305-1-git-send-email-feng.tang@intel.com Link: https://lore.kernel.org/r/20200630212517.308045-4-ben.widawsky@intel.com Link: https://lkml.kernel.org/r/1627970362-61305-2-git-send-email-feng.tang@intel.com Co-developed-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Huang Ying <ying.huang@intel.com>b Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/mempolicy: use readable NUMA_NO_NODE macro instead of magic numberBaolin Wang1-3/+3
The caller of mpol_misplaced() already use NUMA_NO_NODE to check whether current page node is misplaced, thus using NUMA_NO_NODE in mpol_misplaced() instead of magic number is more readable. Link: https://lkml.kernel.org/r/1b77c0ce21183fa86f4db250b115cf5e27396528.1627558356.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm: compaction: support triggering of proactive compaction by userCharan Teja Reddy5-4/+42
The proactive compaction[1] gets triggered for every 500msec and run compaction on the node for COMPACTION_HPAGE_ORDER (usually order-9) pages based on the value set to sysctl.compaction_proactiveness. Triggering the compaction for every 500msec in search of COMPACTION_HPAGE_ORDER pages is not needed for all applications, especially on the embedded system usecases which may have few MB's of RAM. Enabling the proactive compaction in its state will endup in running almost always on such systems. Other side, proactive compaction can still be very much useful for getting a set of higher order pages in some controllable manner(controlled by using the sysctl.compaction_proactiveness). So, on systems where enabling the proactive compaction always may proove not required, can trigger the same from user space on write to its sysctl interface. As an example, say app launcher decide to launch the memory heavy application which can be launched fast if it gets more higher order pages thus launcher can prepare the system in advance by triggering the proactive compaction from userspace. This triggering of proactive compaction is done on a write to sysctl.compaction_proactiveness by user. [1]https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?id=facdaa917c4d5a376d09d25865f5a863f906234a [akpm@linux-foundation.org: tweak vm.rst, per Mike] Link: https://lkml.kernel.org/r/1627653207-12317-1-git-send-email-charante@codeaurora.org Signed-off-by: Charan Teja Reddy <charante@codeaurora.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Nitin Gupta <nigupta@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm: compaction: optimize proactive compaction deferralsCharan Teja Reddy1-10/+19
Vlastimil Babka figured out that when fragmentation score didn't go down across the proactive compaction i.e. when no progress is made, next wake up for proactive compaction is deferred for 1 << COMPACT_MAX_DEFER_SHIFT, i.e. 64 times, with each wakeup interval of HPAGE_FRAG_CHECK_INTERVAL_MSEC(=500). In each of this wakeup, it just decrement 'proactive_defer' counter and goes sleep i.e. it is getting woken to just decrement a counter. The same deferral time can also achieved by simply doing the HPAGE_FRAG_CHECK_INTERVAL_MSEC << COMPACT_MAX_DEFER_SHIFT thus unnecessary wakeup of kcompact thread is avoided thus also removes the need of 'proactive_defer' thread counter. [akpm@linux-foundation.org: tweak comment] Link: https://lore.kernel.org/linux-fsdevel/88abfdb6-2c13-b5a6-5b46-742d12d1c910@suse.cz/ Link: https://lkml.kernel.org/r/1626869599-25412-1-git-send-email-charante@codeaurora.org Signed-off-by: Charan Teja Reddy <charante@codeaurora.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Nitin Gupta <nigupta@nvidia.com> Cc: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm, vmscan: guarantee drop_slab_node() terminationVlastimil Babka1-1/+2
drop_slab_node() is called as part of echo 2>/proc/sys/vm/drop_caches operation. It iterates over all memcgs and calls shrink_slab() which in turn iterates over all slab shrinkers. Freed objects are counted and as long as the total number of freed objects from all memcgs and shrinkers is higher than 10, drop_slab_node() loops for another full memcgs*shrinkers iteration. This arbitrary constant threshold of 10 can result in effectively an infinite loop on a system with large number of memcgs and/or parallel activity that allocates new objects. This has been reported previously by Chunxin Zang [1] and recently by our customer. The previous report [1] has resulted in commit 069c411de40a ("mm/vmscan: fix infinite loop in drop_slab_node") which added a check for signals allowing the user to terminate the command writing to drop_caches. At the time it was also considered to make the threshold grow with each iteration to guarantee termination, but such patch hasn't been formally proposed yet. This patch implements the dynamically growing threshold. At first iteration it's enough to free one object to continue, and this threshold effectively doubles with each iteration. Our customer's feedback was positive. There is always a risk that this change will result on some system in a previously terminating drop_caches operation to terminate sooner and free fewer objects. Ideally the semantics would guarantee freeing all freeable objects that existed at the moment of starting the operation, while not looping forever for newly allocated objects, but that's not feasible to track. In the less ideal solution based on thresholds, arguably the termination guarantee is more important than the exhaustiveness guarantee. If there are reports of large regression wrt being exhaustive, we can tune how fast the threshold grows. [1] https://lore.kernel.org/lkml/20200909152047.27905-1-zangchunxin@bytedance.com/T/#u [vbabka@suse.cz: avoid undefined shift behaviour] Link: https://lkml.kernel.org/r/2f034e6f-a753-550a-f374-e4e23899d3d5@suse.cz Link: https://lkml.kernel.org/r/20210818152239.25502-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Chunxin Zang <zangchunxin@bytedance.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Chris Down <chris@chrisdown.name> Cc: Michal Hocko <mhocko@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/vmscan: add 'else' to remove check_pending labelMiaohe Lin1-9/+5
We could add 'else' to remove the somewhat odd check_pending label to make code core succinct. Link: https://lkml.kernel.org/r/20210717065911.61497-5-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alex Shi <alexs@kernel.org> Cc: Alistair Popple <apopple@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/vmscan: remove unneeded return value of kswapd_run()Miaohe Lin2-6/+3
The return value of kswapd_run() is unused now. Clean it up. Link: https://lkml.kernel.org/r/20210717065911.61497-4-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alex Shi <alexs@kernel.org> Cc: Alistair Popple <apopple@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/vmscan: remove misleading setting to sc->priorityMiaohe Lin1-2/+0
The priority field of sc is used to control how many pages we should scan at once while we always traverse the list to shrink the pages in these functions. So these settings are unneeded and misleading. Link: https://lkml.kernel.org/r/20210717065911.61497-3-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Alex Shi <alexs@kernel.org> Cc: Alistair Popple <apopple@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shaohua Li <shli@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/vmscan: remove the PageDirty check after MADV_FREE pages are page_ref_freezedMiaohe Lin1-5/+8
Patch series "Cleanups for vmscan", v2. This series contains cleanups to remove unneeded return value, misleading setting and so on. Also this remove the PageDirty check after MADV_FREE pages are page_ref_freezed. More details can be found in the respective changelogs. This patch (of 4): If the MADV_FREE pages are redirtied before they could be reclaimed, put the pages back to anonymous LRU list by setting SwapBacked flag and the pages will be reclaimed in normal swapout way. But as Yu Zhao pointed out, "The page has only one reference left, which is from the isolation. After the caller puts the page back on lru and drops the reference, the page will be freed anyway. It doesn't matter which lru it goes." So we don't bother checking PageDirty here. [Yu Zhao's comment is also quoted in the code.] Link: https://lkml.kernel.org/r/20210717065911.61497-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210717065911.61497-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Yu Zhao <yuzhao@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Alex Shi <alexs@kernel.org> Cc: Alistair Popple <apopple@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/vmpressure: replace vmpressure_to_css() with vmpressure_to_memcg()Hui Su3-5/+4
We can get memcg directly form vmpr instead of vmpr->memcg->css->memcg, so add a new func helper vmpressure_to_memcg(). And no code will use vmpressure_to_css(), so delete it. Link: https://lkml.kernel.org/r/20210630112146.455103-1-suhui@zeku.com Signed-off-by: Hui Su <suhui@zeku.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Chris Down <chris@chrisdown.name> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/migrate: add sysfs interface to enable reclaim migrationHuang Ying4-2/+92
Some method is obviously needed to enable reclaim-based migration. Just like traditional autonuma, there will be some workloads that will benefit like workloads with more "static" configurations where hot pages stay hot and cold pages stay cold. If pages come and go from the hot and cold sets, the benefits of this approach will be more limited. The benefits are truly workload-based and *not* hardware-based. We do not believe that there is a viable threshold where certain hardware configurations should have this mechanism enabled while others do not. To be conservative, earlier work defaulted to disable reclaim- based migration and did not include a mechanism to enable it. This proposes add a new sysfs file /sys/kernel/mm/numa/demotion_enabled as a method to enable it. We are open to any alternative that allows end users to enable this mechanism or disable it if workload harm is detected (just like traditional autonuma). Once this is enabled page demotion may move data to a NUMA node that does not fall into the cpuset of the allocating process. This could be construed to violate the guarantees of cpusets. However, since this is an opt-in mechanism, the assumption is that anyone enabling it is content to relax the guarantees. Link: https://lkml.kernel.org/r/20210721063926.3024591-9-ying.huang@intel.com Link: https://lkml.kernel.org/r/20210715055145.195411-10-ying.huang@intel.com Signed-off-by: Huang Ying <ying.huang@intel.com> Originally-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Xu <weixugc@google.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/vmscan: never demote for memcg reclaimDave Hansen1-2/+7
Global reclaim aims to reduce the amount of memory used on a given node or set of nodes. Migrating pages to another node serves this purpose. memcg reclaim is different. Its goal is to reduce the total memory consumption of the entire memcg, across all nodes. Migration does not assist memcg reclaim because it just moves page contents between nodes rather than actually reducing memory consumption. Link: https://lkml.kernel.org/r/20210715055145.195411-9-ying.huang@intel.com Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Yang Shi <yang.shi@linux.alibaba.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Xu <weixugc@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Keith Busch <kbusch@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/vmscan: Consider anonymous pages without swapKeith Busch1-4/+30
Reclaim anonymous pages if a migration path is available now that demotion provides a non-swap recourse for reclaiming anon pages. Note that this check is subtly different from the can_age_anon_pages() checks. This mechanism checks whether a specific page in a specific context can actually be reclaimed, given current swap space and cgroup limits. can_age_anon_pages() is a much simpler and more preliminary check which just says whether there is a possibility of future reclaim. [kbusch@kernel.org: v11] Link: https://lkml.kernel.org/r/20210715055145.195411-8-ying.huang@intel.com Link: https://lkml.kernel.org/r/20210721063926.3024591-7-ying.huang@intel.com Link: https://lkml.kernel.org/r/20210715055145.195411-8-ying.huang@intel.com Cc: Keith Busch <kbusch@kernel.org> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Xu <weixugc@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/vmscan: add helper for querying ability to age anonymous pagesDave Hansen1-2/+18
Anonymous pages are kept on their own LRU(s). These lists could theoretically always be scanned and maintained. But, without swap, there is currently nothing the kernel can *do* with the results of a scanned, sorted LRU for anonymous pages. A check for '!total_swap_pages' currently serves as a valid check as to whether anonymous LRUs should be maintained. However, another method will be added shortly: page demotion. Abstract out the 'total_swap_pages' checks into a helper, give it a logically significant name, and check for the possibility of page demotion. [dave.hansen@linux.intel.com: v11] Link: https://lkml.kernel.org/r/20210715055145.195411-7-ying.huang@intel.com Link: https://lkml.kernel.org/r/20210721063926.3024591-6-ying.huang@intel.com Link: https://lkml.kernel.org/r/20210715055145.195411-7-ying.huang@intel.com Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Greg Thelen <gthelen@google.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Xu <weixugc@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/vmscan: add page demotion counterYang Shi3-0/+9
Account the number of demoted pages. Add pgdemote_kswapd and pgdemote_direct VM counters showed in /proc/vmstat. [ daveh: - __count_vm_events() a bit, and made them look at the THP size directly rather than getting data from migrate_pages() ] Link: https://lkml.kernel.org/r/20210721063926.3024591-5-ying.huang@intel.com Link: https://lkml.kernel.org/r/20210715055145.195411-6-ying.huang@intel.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Wei Xu <weixugc@google.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Greg Thelen <gthelen@google.com> Cc: Keith Busch <kbusch@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/migrate: demote pages during reclaimDave Hansen3-1/+96
This is mostly derived from a patch from Yang Shi: https://lore.kernel.org/linux-mm/1560468577-101178-10-git-send-email-yang.shi@linux.alibaba.com/ Add code to the reclaim path (shrink_page_list()) to "demote" data to another NUMA node instead of discarding the data. This always avoids the cost of I/O needed to read the page back in and sometimes avoids the writeout cost when the page is dirty. A second pass through shrink_page_list() will be made if any demotions fail. This essentially falls back to normal reclaim behavior in the case that demotions fail. Previous versions of this patch may have simply failed to reclaim pages which were eligible for demotion but were unable to be demoted in practice. For some cases, for example, MADV_PAGEOUT, the pages are always discarded instead of demoted to follow the kernel API definition. Because MADV_PAGEOUT is defined as freeing specified pages regardless in which tier they are. Note: This just adds the start of infrastructure for migration. It is actually disabled next to the FIXME in migrate_demote_page_ok(). [dave.hansen@linux.intel.com: v11] Link: https://lkml.kernel.org/r/20210715055145.195411-5-ying.huang@intel.com Link: https://lkml.kernel.org/r/20210721063926.3024591-4-ying.huang@intel.com Link: https://lkml.kernel.org/r/20210715055145.195411-5-ying.huang@intel.com Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Wei Xu <weixugc@google.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Keith Busch <kbusch@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/migrate: enable returning precise migrate_pages() success countYang Shi8-12/+18
Under normal circumstances, migrate_pages() returns the number of pages migrated. In error conditions, it returns an error code. When returning an error code, there is no way to know how many pages were migrated or not migrated. Make migrate_pages() return how many pages are demoted successfully for all cases, including when encountering errors. Page reclaim behavior will depend on this in subsequent patches. Link: https://lkml.kernel.org/r/20210721063926.3024591-3-ying.huang@intel.com Link: https://lkml.kernel.org/r/20210715055145.195411-4-ying.huang@intel.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Suggested-by: Oscar Salvador <osalvador@suse.de> [optional parameter] Reviewed-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Xu <weixugc@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Keith Busch <kbusch@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/migrate: update node demotion order on hotplug eventsDave Hansen1-1/+89
Reclaim-based migration is attempting to optimize data placement in memory based on the system topology. If the system changes, so must the migration ordering. The implementation is conceptually simple and entirely unoptimized. On any memory or CPU hotplug events, assume that a node was added or removed and recalculate all migration targets. This ensures that the node_demotion[] array is always ready to be used in case the new reclaim mode is enabled. This recalculation is far from optimal, most glaringly that it does not even attempt to figure out the hotplug event would have some *actual* effect on the demotion order. But, given the expected paucity of hotplug events, this should be fine. Link: https://lkml.kernel.org/r/20210721063926.3024591-2-ying.huang@intel.com Link: https://lkml.kernel.org/r/20210715055145.195411-3-ying.huang@intel.com Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Xu <weixugc@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mm/numa: automatically generate node migration orderDave Hansen3-1/+222
Patch series "Migrate Pages in lieu of discard", v11. We're starting to see systems with more and more kinds of memory such as Intel's implementation of persistent memory. Let's say you have a system with some DRAM and some persistent memory. Today, once DRAM fills up, reclaim will start and some of the DRAM contents will be thrown out. Allocations will, at some point, start falling over to the slower persistent memory. That has two nasty properties. First, the newer allocations can end up in the slower persistent memory. Second, reclaimed data in DRAM are just discarded even if there are gobs of space in persistent memory that could be used. This patchset implements a solution to these problems. At the end of the reclaim process in shrink_page_list() just before the last page refcount is dropped, the page is migrated to persistent memory instead of being dropped. While I've talked about a DRAM/PMEM pairing, this approach would function in any environment where memory tiers exist. This is not perfect. It "strands" pages in slower memory and never brings them back to fast DRAM. Huang Ying has follow-on work which repurposes NUMA balancing to promote hot pages back to DRAM. This is also all based on an upstream mechanism that allows persistent memory to be onlined and used as if it were volatile: http://lkml.kernel.org/r/20190124231441.37A4A305@viggo.jf.intel.com With that, the DRAM and PMEM in each socket will be represented as 2 separate NUMA nodes, with the CPUs sit in the DRAM node. So the general inter-NUMA demotion mechanism introduced in the patchset can migrate the cold DRAM pages to the PMEM node. We have tested the patchset with the postgresql and pgbench. On a 2-socket server machine with DRAM and PMEM, the kernel with the patchset can improve the score of pgbench up to 22.1% compared with that of the DRAM only + disk case. This comes from the reduced disk read throughput (which reduces up to 70.8%). == Open Issues == * Memory policies and cpusets that, for instance, restrict allocations to DRAM can be demoted to PMEM whenever they opt in to this new mechanism. A cgroup-level API to opt-in or opt-out of these migrations will likely be required as a follow-on. * Could be more aggressive about where anon LRU scanning occurs since it no longer necessarily involves I/O. get_scan_count() for instance says: "If we have no swap space, do not bother scanning anon pages" This patch (of 9): Prepare for the kernel to auto-migrate pages to other memory nodes with a node migration table. This allows creating single migration target for each NUMA node to enable the kernel to do NUMA page migrations instead of simply discarding colder pages. A node with no target is a "terminal node", so reclaim acts normally there. The migration target does not fundamentally _need_ to be a single node, but this implementation starts there to limit complexity. When memory fills up on a node, memory contents can be automatically migrated to another node. The biggest problems are knowing when to migrate and to where the migration should be targeted. The most straightforward way to generate the "to where" list would be to follow the page allocator fallback lists. Those lists already tell us if memory is full where to look next. It would also be logical to move memory in that order. But, the allocator fallback lists have a fatal flaw: most nodes appear in all the lists. This would potentially lead to migration cycles (A->B, B->A, A->B, ...). Instead of using the allocator fallback lists directly, keep a separate node migration ordering. But, reuse the same data used to generate page allocator fallback in the first place: find_next_best_node(). This means that the firmware data used to populate node distances essentially dictates the ordering for now. It should also be architecture-neutral since all NUMA architectures have a working find_next_best_node(). RCU is used to allow lock-less read of node_demotion[] and prevent demotion cycles been observed. If multiple reads of node_demotion[] are performed, a single rcu_read_lock() must be held over all reads to ensure no cycles are observed. Details are as follows. === What does RCU provide? === Imagine a simple loop which walks down the demotion path looking for the last node: terminal_node = start_node; while (node_demotion[terminal_node] != NUMA_NO_NODE) { terminal_node = node_demotion[terminal_node]; } The initial values are: node_demotion[0] = 1; node_demotion[1] = NUMA_NO_NODE; and are updated to: node_demotion[0] = NUMA_NO_NODE; node_demotion[1] = 0; What guarantees that the cycle is not observed: node_demotion[0] = 1; node_demotion[1] = 0; and would loop forever? With RCU, a rcu_read_lock/unlock() can be placed around the loop. Since the write side does a synchronize_rcu(), the loop that observed the old contents is known to be complete before the synchronize_rcu() has completed. RCU, combined with disable_all_migrate_targets(), ensures that the old migration state is not visible by the time __set_migration_target_nodes() is called. === What does READ_ONCE() provide? === READ_ONCE() forbids the compiler from merging or reordering successive reads of node_demotion[]. This ensures that any updates are *eventually* observed. Consider the above loop again. The compiler could theoretically read the entirety of node_demotion[] into local storage (registers) and never go back to memory, and *permanently* observe bad values for node_demotion[]. Note: RCU does not provide any universal compiler-ordering guarantees: https://lore.kernel.org/lkml/20150921204327.GH4029@linux.vnet.ibm.com/ This code is unused for now. It will be called later in the series. Link: https://lkml.kernel.org/r/20210721063926.3024591-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20210715055145.195411-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20210715055145.195411-2-ying.huang@intel.com Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Xu <weixugc@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03selftests/vm/userfaultfd: wake after copy failureNadav Amit1-0/+13
When userfaultfd copy-ioctl fails since the PTE already exists, an -EEXIST error is returned and the faulting thread is not woken. The current userfaultfd test does not wake the faulting thread in such case. The assumption is presumably that another thread set the PTE through copy/wp ioctl and would wake the faulting thread or that alternatively the fault handler would realize there is no need to "must_wait" and continue. This is not necessarily true. There is an assumption that the "must_wait" tests in handle_userfault() are sufficient to provide definitive answer whether the offending PTE is populated or not. However, userfaultfd_must_wait() test is lockless. Consequently, concurrent calls to ptep_modify_prot_start(), for instance, can clear the PTE and can cause userfaultfd_must_wait() to wrongly assume it is not populated and a wait is needed. There are therefore 3 options: (1) Change the tests to wake on copy failure. (2) Wake faulting thread unconditionally on zero/copy ioctls before returning -EEXIST. (3) Change the userfaultfd_must_wait() to hold locks. This patch took the first approach, but the others are valid solutions with different tradeoffs. Link: https://lkml.kernel.org/r/20210808020724.1022515-4-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03userfaultfd: prevent concurrent API initializationNadav Amit1-47/+44
userfaultfd assumes that the enabled features are set once and never changed after UFFDIO_API ioctl succeeded. However, currently, UFFDIO_API can be called concurrently from two different threads, succeed on both threads and leave userfaultfd's features in non-deterministic state. Theoretically, other uffd operations (ioctl's and page-faults) can be dispatched while adversely affected by such changes of features. Moreover, the writes to ctx->state and ctx->features are not ordered, which can - theoretically, again - let userfaultfd_ioctl() think that userfaultfd API completed, while the features are still not initialized. To avoid races, it is arguably best to get rid of ctx->state. Since there are only 2 states, record the API initialization in ctx->features as the uppermost bit and remove ctx->state. Link: https://lkml.kernel.org/r/20210808020724.1022515-3-namit@vmware.com Fixes: 9cd75c3cd4c3d ("userfaultfd: non-cooperative: add ability to report non-PF events from uffd descriptor") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03userfaultfd: change mmap_changing to atomicNadav Amit3-23/+25
Patch series "userfaultfd: minor bug fixes". Three unrelated bug fixes. The first two addresses possible issues (not too theoretical ones), but I did not encounter them in practice. The third patch addresses a test bug that causes the test to fail on my system. It has been sent before as part of a bigger RFC. This patch (of 3): mmap_changing is currently a boolean variable, which is set and cleared without any lock that protects against concurrent modifications. mmap_changing is supposed to mark whether userfaultfd page-faults handling should be retried since mappings are undergoing a change. However, concurrent calls, for instance to madvise(MADV_DONTNEED), might cause mmap_changing to be false, although the remove event was still not read (hence acknowledged) by the user. Change mmap_changing to atomic_t and increase/decrease appropriately. Add a debug assertion to see whether mmap_changing is negative. Link: https://lkml.kernel.org/r/20210808020724.1022515-1-namit@vmware.com Link: https://lkml.kernel.org/r/20210808020724.1022515-2-namit@vmware.com Fixes: df2cc96e77011 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Peter Xu <peterx@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03hugetlb: fix hugetlb cgroup refcounting during vma splitMike Kravetz2-1/+15
Guillaume Morin reported hitting the following WARNING followed by GPF or NULL pointer deference either in cgroups_destroy or in the kill_css path.: percpu ref (css_release) <= 0 (-1) after switching to atomic WARNING: CPU: 23 PID: 130 at lib/percpu-refcount.c:196 percpu_ref_switch_to_atomic_rcu+0x127/0x130 CPU: 23 PID: 130 Comm: ksoftirqd/23 Kdump: loaded Tainted: G O 5.10.60 #1 RIP: 0010:percpu_ref_switch_to_atomic_rcu+0x127/0x130 Call Trace: rcu_core+0x30f/0x530 rcu_core_si+0xe/0x10 __do_softirq+0x103/0x2a2 run_ksoftirqd+0x2b/0x40 smpboot_thread_fn+0x11a/0x170 kthread+0x10a/0x140 ret_from_fork+0x22/0x30 Upon further examination, it was discovered that the css structure was associated with hugetlb reservations. For private hugetlb mappings the vma points to a reserve map that contains a pointer to the css. At mmap time, reservations are set up and a reference to the css is taken. This reference is dropped in the vma close operation; hugetlb_vm_op_close. However, if a vma is split no additional reference to the css is taken yet hugetlb_vm_op_close will be called twice for the split vma resulting in an underflow. Fix by taking another reference in hugetlb_vm_op_open. Note that the reference is only taken for the owner of the reserve map. In the more common fork case, the pointer to the reserve map is cleared for non-owning vmas. Link: https://lkml.kernel.org/r/20210830215015.155224-1-mike.kravetz@oracle.com Fixes: e9fe92ae0cd2 ("hugetlb_cgroup: add reservation accounting for private mappings") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reported-by: Guillaume Morin <guillaume@morinfr.org> Suggested-by: Guillaume Morin <guillaume@morinfr.org> Tested-by: Guillaume Morin <guillaume@morinfr.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>