summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2014-09-03ARM: at91: soc: Add init_time callbackMaxime Ripard3-0/+7
Introduce an init_time callback to the at91_init_soc structure to be able to tweak the init_time machine callback on a per-soc basis, instead of having to rely on a global one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Conflicts: arch/arm/mach-at91/setup.c
2014-09-03ARM: at91: PIT: (Almost) remove the global variablesMaxime Ripard1-71/+108
The timer driver is using some global variables to define some variables it has to use in most of its functions, like the base address. Use some container_of calls to have a single dynamic (and local) variable to hold this content. The only exception is in the !DT case, where the call chain to at91sam926x_ioremap_pit and then at91sam926x_pit_init as init_time makes it hard for the moment to pass the physical address of the timer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-03ARM: at91: PIT: use request_irq instead of setup_irqMaxime Ripard1-14/+6
We can use the generic request_irq now to register a timer interrupt handler, instead of the more complex setup_irq. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-03ARM: at91: PIT: Use pr_fmtMaxime Ripard1-6/+8
All the panic messages hardcode the same prefix. Define the pr_fmt macro to unify its definition. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-03ARM: at91: PIT: Use consistent exit path in probeMaxime Ripard1-10/+4
The current probe code is, whenever it fails to retrieve a resource, either panicing, silently returning, or returning and displaying an error. Make the code consistent by always panicing whenever it fails to grab any resource. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-03ARM: at91: dt: Remove init_time definitionsMaxime Ripard2-21/+0
The current AT91 DT boards have a completely generic init_time definition. Remove them from the machine declaration. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Conflicts: arch/arm/mach-at91/board-dt-sam9.c arch/arm/mach-at91/board-dt-sama5.c
2014-09-03ARM: at91: PIT: Rework probe functionsMaxime Ripard4-64/+51
The PIT timer driver until now had a single probe function, disregarding wether it was probed through DT or in the old-style way. This code later on was calling some DT function to retrieve the proper values for its base address, interrupts and clocks. While this was working, it was preventing the usage of CLOCKSOURCE_OF_DECLARE, and the two different probe path were not as clearly separated as they could be. Rework the probe path to take this into account, and switch to CLOCKSOURCE_OF_DECLARE. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-02ARM: at91: PIT: Use of_have_populated_dt instead of CONFIG_OFMaxime Ripard1-8/+2
Until now, the machines, even when CONFIG_OF was enabled, were calling at91sam926x_ioremap_pit to try to map the PIT address using the defined physical address. Obviously, with DT, it's not appropriate anymore, and some code was added to the function to deal with this case. Unfortunately, this code was conditionned on CONFIG_OF, which can be enabled, even though no DT was actually used, which would result in such a case, to this code being executed, without any reason. Moreover, the logic that was here before to bail out of the function just check in the DT to see if the PIT node is there, which is the case in all our DTSI. All this can be made much more straightforward just by using of_have_populated_dt to bail out. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-02ARM: at91: PIT: Use DIV_ROUND_CLOSEST to compute the cyclesMaxime Ripard1-1/+1
Until now, the pit_cycle computation was dividing the rate by HZ, rounding to the closest integer, but without using the appropriate macro. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-02ARM: at91: generic.h: Add include safe guardsMaxime Ripard1-0/+5
The generic.h header file doesn't have any safe guards against multiple inclusion. It only worked so far because all the symbols defined in it were extern, but this is a rather fragile assumption. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-02ARM: at91: PIT: Follow the general coding rulesMaxime Ripard1-8/+9
Replace all masks and bits definitions by matching calls to BIT and GENMASK. While we're at it, also fix a few style issues. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-01power: reset: at91-poweroff: fix wakeup status register indexNicolas Ferre1-1/+1
The wakeup status is read from Shutdown Status Register and not the SHDW_CR which is the one at address 0. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-01ARM: at91/power/reset: fix Kconfig "depends on" directiveNicolas Ferre1-2/+2
MACH_AT91 doesn't exist so we can't "depend" on it. Fix the typo by using the proper ARCH_AT91 config option. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-01ARM: at91: fix ramc standby function registrationAlexandre Belloni1-4/+7
After the for_each_matching_node loop, we end up with a null value for np. Then, of_match_node() is not matching anything and we can't register the standby function and "ramc no standby function available" is printed. Fix that by selecting the first available standby function. For now, at91_pm_set_standby doesn't support multiple different standby functions and no existing SoCs have different RAM controllers. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-25ARM: at91: Remove rstc and shdwc headersMaxime Ripard12-113/+0
These headers used to provide an "API" to access the rstc and shdwc registers. Now that no-one uses this API anymore, we can safely remove those. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-25ARM: at91: Remove rstc and shdwnc global base addressesMaxime Ripard7-34/+0
Now that there's no user left for the global variables holding the reset and shutdown controllers base address, we can remove these variables and their associated mapping function. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-25ARM: at91/pm: Remove show_reset_status functionMaxime Ripard1-72/+0
Both the reset and poweroff drivers are now implementing what the show_reset_status function used to do. Hence, we can remove this rather hackish function that prevents us from doing further cleanup. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-25ARM: at91: Remove poweroff codeMaxime Ripard1-6/+0
Now that all the SoC have been converted to use the new poweroff driver, we can remove the poweroff code defined in mach-at91. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-25ARM: at91: Register the poweroff driverMaxime Ripard5-0/+75
Register the poweroff driver in the old-style SoC definition so that the driver is loaded and provide a shutdown hook. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-25ARM: at91: Remove poweroff DT probingMaxime Ripard1-77/+0
Now that the poweroff code is a driver of its own, remove the DT probing in mach-at91 and let the usual DT code do its job. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-25ARM: at91: Remove reset code from the machine codeMaxime Ripard10-102/+0
Now that the transition is over and that we probe our reset driver in every case, we can remove the legacy code from the machine directory. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-25ARM: at91: Call at91_register_devices in the board filesMaxime Ripard11-0/+22
Make every board call the register_devices callback so that the devices declared by the SoC are registered. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-25ARM: at91: Probe the reset driverMaxime Ripard5-0/+135
Register the reset device in the right SoCs so that the reset driver is actually probed even in the old-style probing case. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-25ARM: at91/soc: Introduce register_devices callbackMaxime Ripard3-0/+8
Some core devices should be registered by the SoC itself rather than by every board using this SoC. Introduce a register_devices callback that should be called during the init_machine in order to do that. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-25ARM: at91: Remove the old-style reset probingMaxime Ripard1-29/+0
Now that the reset code is a driver of its own, just let the usual DT probing mecanism do its job, and remove the code entirely in this case. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-25ARM: at91: Rework ramc mapping codeMaxime Ripard2-19/+14
Adapt the ramc mapping code to handle multiple ram controllers in the DT. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-25ARM: at91: setup: Switch to pr_fmtMaxime Ripard1-20/+22
Most of the printed messages are using the "AT91:" prefix in the setup.c file, but not all of them. Moreover, those who add it hardcode it directly in the message, while the pr_fmt macro makes it easier for us to support such a case. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-25Merge tag 'at91-drivers-for-3.17' of ↵Nicolas Ferre11-15/+551
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux Pull AT91 reset, poweroff and ram drivers from Maxime Ripard: "This tag holds the various new drivers introduced to move code that used to be in mach-at91 over to the proper frameworks. These files are the reboot and poweroff code for all AT91 SoCs but the RM9200, and the ram controller driver is not doing much at the time, except for grabing the RAM clock in order to leave it always enabled." Conflicts: arch/arm/mach-at91/Kconfig
2014-08-25Merge branches 'at91-3.18-cleanup' and 'at91-3.18-dt' into at91-3.18-driversNicolas Ferre14-331/+77
2014-08-19Merge tag 'at91-dt-for-3.17' of ↵Nicolas Ferre5-6/+32
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux Pull AT91 ramc and reset/poweroff related DT patches from Maxim Ripard: "This branch gathers a few devicetree patches needed for the reworks found in the later patches to be sent. More precisely, it holds: - The addition of ddrck for the sama5d3 and the sam9 SoCs - The addition of the shutdown controller node in the sama5d3 DTSI - The slight rework of the ramc bindings for the SoCs that have several RAM controllers" Conflicts: arch/arm/boot/dts/at91sam9g45.dtsi
2014-08-19ARM: at91: remove old irq materialBoris BREZILLON1-264/+6
Remove all the material related to AIC5 support: this interrupt controller driver is now implemented in drivers/irqchip/atmel-aic.c. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-19ARM: at91: make use of the new AIC driver for dt enabled boardsBoris BREZILLON4-42/+3
Remove selection of OLD_IRQ_AT91 when selecting dt boards. Select ATMEL_AIC_IRQ for sama5 SoCs (a kernel compiled for this SoC will always use ATMEL_AIC_IRQ driver). Select ATMEL_AIC_IRQ for at91rm9200 and at91sam9 SoCs only if OLD_IRQ_AT91 is not selected (which means we are compiling a pure DT kernel, without any legacy board support). Remove specific irq init code in all dt board files: this init procedure is automatically handled in of_irq_init which is called by the arm irq core code and is in charge of calling the appropriate aic init functions. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-19ARM: at91: enclose at91_aic_xx calls in IS_ENABLED(CONFIG_OLD_IRQ_AT91) blocksBoris BREZILLON2-13/+22
Enclose at91_aic_xx calls in IS_ENABLED(CONFIG_OLD_IRQ_AT91) blocks in order to prepare migration to the new AIC driver. In the new AIC driver the suspend/resume functions are called by the generic irq framework and are no longer needed in the PM specific code. Moreover, the new AIC driver no longer exposes the at91_aic_base variable which is used by the at91_aic_read functions. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-19ARM: at91: introduce OLD_IRQ_AT91 Kconfig optionBoris BREZILLON3-9/+17
Introduce the OLD_IRQ_AT91 Kconfig option to prepare migration to the new AIC driver. Select this option for all at91 SoCs and all available boards so that we can later move DT enabled boards to the new irq driver and keep the old implementation when legacy boards are selected. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-16Linux 3.17-rc1v3.17-rc1Linus Torvalds1-2/+2
2014-08-16Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds24-108/+608
Pull x86 platform driver updates from Matthew Garrett: "A moderate number of changes, but nothing awfully significant. A lot of const cleanups, some reworking and additions to the rfkill quirks in the asus driver, a new driver for generating falling laptop events on Toshibas and some misc fixes. Maybe vendors have stopped inventing things" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (41 commits) platform/x86: Enable build support for toshiba_haps Documentation: Add file about toshiba_haps module platform/x86: Toshiba HDD Active Protection Sensor asus-nb-wmi: Add wapf4 quirk for the U32U alienware-wmi: make hdmi_mux enabled on case-by-case basis ideapad-laptop: Constify DMI table and other r/o variables asus-nb-wmi.c: Rename x401u quirk to wapf4 compal-laptop: correct invalid hwmon name toshiba_acpi: Add Qosmio X75-A to the alt keymap dmi list toshiba_acpi: Add extra check to backlight code Fix log message about future removal of interface ideapad-laptop: Disable touchpad interface on Yoga models asus-nb-wmi: Add wapf4 quirk for the X550CC intel_ips: Make ips_mcp_limits variables static thinkpad_acpi: Mark volume_alsa_control_{vol,mute} as __initdata fujitsu-laptop: Mark fujitsu_dmi_table[] DMI table as __initconst hp-wmi: Add missing __init annotations to initialization code hp_accel: Constify ACPI and DMI tables fujitsu-tablet: Mark DMI callbacks as __init code dell-laptop: Mark dell_quirks[] DMI table as __initconst ...
2014-08-16Merge branch 'release' of ↵Linus Torvalds3-41/+119
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull idle update from Len Brown: "Two Intel-platform-specific updates to intel_idle, and a cosmetic tweak to the turbostat utility" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: tweak whitespace in output format intel_idle: Broadwell support intel_idle: Disable Baytrail Core and Module C6 auto-demotion
2014-08-16Merge tag 'fixes-for-linus' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module fix from Rusty Russell: "Nasty potential bug if someone uses a known module param with an invalid value (we don't fail unknown module params any more, just warn)" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: Clean up ro/nx after early module load failures
2014-08-16Merge branch 'rng-queue' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio Pull virtio-rng update from Amit Shah: "Add derating factor for use by hwrng core Sending directly to you with the commit log changes Ted Ts'o pointed out. Not sure if Rusty's back after his travel, but this already has his s-o-b" * 'rng-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio: virtio: rng: add derating factor for use by hwrng core
2014-08-16Merge branch 'for-linus2' of ↵Linus Torvalds17-305/+541
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs updates from Chris Mason: "These are all fixes I'd like to get out to a broader audience. The biggest of the bunch is Mark's quota fix, which is also in the SUSE kernel, and makes our subvolume quotas dramatically more accurate. I've been running xfstests with these against your current git overnight, but I'm queueing up longer tests as well" * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: disable strict file flushes for renames and truncates Btrfs: fix csum tree corruption, duplicate and outdated checksums Btrfs: Fix memory corruption by ulist_add_merge() on 32bit arch Btrfs: fix compressed write corruption on enospc btrfs: correctly handle return from ulist_add btrfs: qgroup: account shared subtrees during snapshot delete Btrfs: read lock extent buffer while walking backrefs Btrfs: __btrfs_mod_ref should always use no_quota btrfs: adjust statfs calculations according to raid profiles
2014-08-16Merge tag 'locks-v3.17-2' of git://git.samba.org/jlayton/linuxLinus Torvalds2-30/+62
Pull file locking bugfixes from Jeff Layton: "Most of these patches are to fix a long-standing regression that crept in when the BKL was removed from the file-locking code. The code was converted to use a conventional spinlock, but some fl_release_private ops can block and you can end up sleeping inside the lock. There's also a patch to make /proc/locks show delegations as 'DELEG'" * tag 'locks-v3.17-2' of git://git.samba.org/jlayton/linux: locks: update Locking documentation to clarify fl_release_private behavior locks: move locks_free_lock calls in do_fcntl_add_lease outside spinlock locks: defer freeing locks in locks_delete_lock until after i_lock has been dropped locks: don't reuse file_lock in __posix_lock_file locks: don't call locks_release_private from locks_copy_lock locks: show delegations as "DELEG" in /proc/locks
2014-08-16Merge git://git.kvack.org/~bcrl/aio-nextLinus Torvalds1-56/+30
Pull aio updates from Ben LaHaise. * git://git.kvack.org/~bcrl/aio-next: aio: use iovec array rather than the single one aio: fix some comments aio: use the macro rather than the inline magic number aio: remove the needless registration of ring file's private_data aio: remove no longer needed preempt_disable() aio: kill the misleading rcu read locks in ioctx_add_table() and kill_ioctx() aio: change exit_aio() to load mm->ioctx_table once and avoid rcu_read_lock()
2014-08-16platform/x86: Enable build support for toshiba_hapsAzael Avalos2-0/+20
Makefile and Kconfig build support patch for the newly introduced kernel module toshiba_haps. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16Documentation: Add file about toshiba_haps moduleAzael Avalos2-0/+78
This patch provides information about the Toshiba HDD Active Protection Sensor driver module toshiba_haps. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16platform/x86: Toshiba HDD Active Protection SensorAzael Avalos1-0/+265
This driver adds support for the built-in accelereometer found on recent Toshiba laptops with HID TOS620A. This driver receives ACPI notify events 0x80 when the sensor detects a sudden move or a harsh vibration, as well as an ACPI notify event 0x81 whenever the movement or vibration has been stabilized. Also provides sysfs entries to get/set the desired protection level and reseting the HDD protection interface. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16asus-nb-wmi: Add wapf4 quirk for the U32UHans de Goede1-0/+14
As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681 the U32U needs wapf=4 too. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16alienware-wmi: make hdmi_mux enabled on case-by-case basisMario Limonciello1-2/+20
Not all HW supporting WMAX method will support the HDMI mux feature. Explicitly quirk the HW that does support it. Signed-off-by: Mario Limonciello <mario_limonciello@dell.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16ideapad-laptop: Constify DMI table and other r/o variablesMathias Krause1-2/+2
Constify the rfkill_blacklist[] DMI table, the ideapad_rfk_data[] table and the ideapad_attribute_group attribute group. There's no need to have them writeable during runtime. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16asus-nb-wmi.c: Rename x401u quirk to wapf4Hans de Goede1-13/+13
The actual x401u does not use the so named x401u quirk but the x55u quirk. All that the x401u quirk does it setting wapf to 4, so rename it to wapf4 to stop the confusion. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16compal-laptop: correct invalid hwmon nameRoald Frederickx1-1/+1
Change the name of the hwmon interface from "compal-laptop" to "compal". A dash is an invalid character for a hwmon name and caused the call to hwmon_device_register_with_groups() to fail. Signed-off-by: Roald Frederickx <roald.frederickx@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 11:01:42 +0000