Age | Commit message (Collapse) | Author | Files | Lines |
|
Currently we flush the entire dcache at boot within __cpu_setup, but
this is unnecessary as the booting protocol demands that the dcache is
invalid and off upon entering the kernel. The presence of the cache
flush only serves to hide bugs in bootloaders, and is not safe in the
presence of SMP.
In an SMP boot scenario the CPUs enter coherency outside of the kernel,
and the primary CPU enables its caches before bringing up secondary
CPUs. Therefore if any secondary CPU has an entry in its cache (in
violation of the boot protocol), the primary CPU might snoop it even if
the secondary CPU's cache is disabled. The boot-time cache flush only
serves to hide a firmware bug, and slows down a cpu boot unnecessarily.
This patch removes the unnecessary boot-time cache flush.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
[catalin.marinas@arm.com: make __flush_dcache_all local only]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Enable cpufreq and power kconfig menus on arm64 along with arm cpufreq
drivers. The power menu is needed for OPP support. At least on Calxeda
systems, the same cpufreq driver is used for arm and arm64 based
systems.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
psci_init() is written to return err code if something goes wrong. However,
the single user, setup_arch(), doesn't care about it. Moreover, every error
path is supplied with a clear message which is enough for pleasant debugging.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Since 652af899799354049b273af897b798b8f03fdd88 "arm64: factor out spin-table
boot method" psci prefix's been introduced. We have a common pr_fmt, so clean
them up.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This patch adds support for DMA API cache maintenance on SoCs without
hardware device cache coherency.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Since arm64 does not support ISA, there is no need for early swiotlb
initialisation. This patch switches the DMA mapping code to
swiotlb_tlb_late_init_with_default_size(). A side effect of this is that
GFP_DMA is used for the swiotlb buffer and devices with a 32-bit
coherent mask are correctly supported.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
On arm64 we do not have two DMA zones, so it does not make sense to
implement ZONE_DMA32. This patch changes ZONE_DMA32 with ZONE_DMA, the
latter covering 32-bit dma address space to honour GFP_DMA allocations.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Remove some unnecessary bits that were apparently carried over from
another architecture's implementation:
- No need to get_page() the vdso text/data - these are part of the
kernel image.
- No need for ClearPageReserved on the vdso text.
- No need to vmap the first text page to check the ELF header - this
can be done through &vdso_start.
Also some minor cleanup:
- Use kcalloc for vdso_pagelist array allocation.
- Don't print on allocation failure, slab/slub will do that for us.
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
arm64_swiotlb_alloc/free_coherent name can be misleading
somtimes with CMA support being enabled after this
patch (c2104debc235b745265b64d610237a6833fd53)
Change this name to be more generic:
__dma_alloc/free_coherent
Signed-off-by: Ritesh Harjani <ritesh.harjani@gmail.com>
[catalin.marinas@arm.com: renamed arm64_swiotlb_dma_ops to coherent_swiotlb_dma_ops]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Change the soft_restart() routine to call cpu_reset() at its identity mapped
physical address.
The cpu_reset() routine must be called at its identity mapped physical address
so that when the MMU is turned off the instruction pointer will be at the correct
location in physical memory.
Signed-off-by: Geoff Levand <geoff@infradead.org> for Huawei, Linaro
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This patch changes the idmap page table creation during boot to cover
the whole kernel image, allowing functions like cpu_reset() to be safely
called with the physical address.
This patch also simplifies the create_block_map asm macro to no longer
take an idmap argument and always use the phys/virt/end parameters. For
the idmap case, phys == virt.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Over the past couple of years, the generic mmu_gather gained range
tracking - 597e1c3580b7 (mm/mmu_gather: enable tlb flush range in generic
mmu_gather), 2b047252d087 (Fix TLB gather virtual address range
invalidation corner cases) - and tlb_fast_mode() has been removed -
29eb77825cc7 (arch, mm: Remove tlb_fast_mode()).
The new mmu_gather structure is now suitable for arm64 and this patch
converts the arch asm/tlb.h to the generic code. One functional
difference is the shift_arg_pages() case where previously the code was
flushing the full mm (no tlb_start_vma call) but now it flushes the
range given to tlb_gather_mmu() (possibly slightly more efficient
previously).
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
|
|
The patch moves the PCI I/O space (currently at 64K) before the
earlyprintk mapping and extends it to 16MB.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
processor debug state PSTATE.D is unmasked in smp call
clear_os_lock for secondary cpus. So debug state is still
masked in normal kernel context. With this patch, unmask
debug state on secondary boot for the cpus in normal kernel
context. Now kgdb tests passed with multicore.
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add HAVE_ARCH_KGDB for arm64 Kconfig
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
typecast instruction_pointer macro to unsigned long to
resolve following compiler warnings like
warning: format '%lx' expects argument of type 'long unsigned int',
but argument 2 has type 'u64' [-Wformat]
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The function kgdb_breakpoint() sets up break point at
compile time by calling arch_kgdb_breakpoint();
Though this call is surrounded by wmb() barrier,
the compile can still re-order the break point,
because this scheduling barrier is not a code motion
barrier in gcc.
Making kgdb_breakpoint() as noinline solves this problem
of code reording around break point instruction and also
avoids problem of being called as inline function from
other places
More details about discussion on this can be found here
http://comments.gmane.org/gmane.linux.ports.arm.kernel/269732
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add KGDB software step debugging support for EL1 debug
in AArch64 mode.
KGDB registers step debug handler with debug monitor.
On receiving 'step' command from GDB tool, target enables
software step debugging and step address is updated in ELR.
Software Step debugging is disabled when 'continue' command
is received
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add KGDB debug support for kernel debugging.
With this patch, basic KGDB debugging is possible.GDB register
layout is updated and GDB tool can establish connection with
target and can set/clear breakpoints.
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add macros to enable and disable to manage PSTATE.D
for debugging. The macros local_dbg_save and local_dbg_restore
are moved to irqflags.h file
KGDB boot tests fail because of PSTATE.D is masked.
unmask it for debugging support
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes for ARM platforms. Most are fixes for DTS
files, mostly from DT conversion on OMAP which is still finding a few
issues here and there.
There's a couple of small stale code removal patches that we usually
queue for the next release instead, but they seemed harmless enough to
bring in now.
Also, a fix for backlight on some PXA platforms, and a cache
configuration fix for Tegra, etc"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer
ARM: tegra: only run PL310 init on systems with one
ARM: tegra: Add head numbers to display controllers
ARM: imx6: build pm-imx6q.c independently of CONFIG_PM
ARM: tegra: fix RTC0 alias for Cardhu
ARM: dove: dt: revert PMU interrupt controller node
Documentation: dt: OMAP: Update Overo/Tobi
ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
ARM: dts: omap3-tobi: Use the correct vendor prefix
ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo
ARM: OMAP2+: Remove legacy macros for zoom platforms
ARM: OMAP2+: Remove MACH_NOKIA_N800
ARM: dts: N900: add missing compatible property
ARM: dts: N9/N950: fix boot hang with 3.14-rc1
ARM: OMAP1: nokia770: enable tahvo-usb
ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module
ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module
ARM: dts: omap3-gta04: Fix mmc1 properties.
ARM: dts: omap3-gta04: Fix 'aux' gpio key flags.
ARM: OMAP2+: add missing ARCH_HAS_OPP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Mostly unexciting driver fixes, plus one fix to lower the severity of
the log message when we don't use an optional regulator - the fixes
for ACPI system made this come up more often and it was correctly
observed that it was causing undue concern for users"
* tag 'regulator-v3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max14577: Fix invalid return value on DT parse success
regulator: core: Change dummy supplies error message to a warning
regulator: s5m8767: Add missing of_node_put
regulator: s5m8767: Use of_get_child_by_name
regulator: da9063: Bug fix when setting max voltage on LDOs 5-11
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"Serialize the registration of a new sched_clock in the currently ARM
only generic sched_clock facilty to avoid sched_clock havoc"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched_clock: Prevent callers from seeing half-updated data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- a bugfix which prevents a divide by 0 panic when the newly introduced
try_msr_calibrate_tsc() fails
- enablement of the Baytrail platform to utilize the newfangled msr
based calibration
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: tsc: Add missing Baytrail frequency to the table
x86, tsc: Fallback to normal calibration if fast MSR calibration fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Another four fixlets to tame the ARM orion irq chip"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: orion: Fix getting generic chip pointer.
irqchip: orion: clear stale interrupts in irq_startup
irqchip: orion: use handle_edge_irq on bridge irqs
irqchip: orion: clear bridge cause register on init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB fixes for reported issues for 3.14-rc4
The majority of these are for USB gadget, phy, and musb driver issues.
And there's a few new device ids thrown in for good measure"
* tag 'usb-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: chipidea: need to mask when writting endptflush and endptprime
usb: musb: correct use of schedule_delayed_work()
usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP
usb: gadget: fix NULL pointer dereference
usb: gadget: printer: using gadget_is_otg to check otg support at runtime
phy: let phy_provider_register be the last step in registering PHY
phy-core: Don't allow building phy-core as a module
phy-core: Don't propagate -ENOSUPP from phy_pm_runtime_get_sync to caller
phy-core: phy_get: Leave error logging to the caller
phy,phy-bcm-kona-usb2.c: Add dependency on HAS_IOMEM
usb: musb: correct use of schedule_delayed_work()
usb: musb: do not sleep in atomic context
USB: serial: option: blacklist interface 4 for Cinterion PHS8 and PXS8
USB: EHCI: add delay during suspend to prevent erroneous wakeups
usb: gadget: bcm63xx_udc: fix build failure on DMA channel code
usb: musb: do not sleep in atomic context
usb: gadget: s3c2410_udc: Fix build error
usb: musb: core: Fix remote-wakeup resume
usb: musb: host: Fix SuperSpeed hub enumeration
usb: musb: fix obex in g_nokia.ko causing kernel panic
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY revert from Greg KH:
"Here is a single commit, a revert of a sysfs file change that ended up
breaking a userspace tool"
* tag 'tty-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: Set correct tty name in 'active' sysfs attribute"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree fix from Greg KH:
"Here is a single android driver fix for 3.14-rc4 that fixes a reported
problem in the binder driver"
* tag 'staging-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: binder: Fix death notifications
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is a single commit, to fix a reported problem in the mei driver"
* tag 'char-misc-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: set client's read_cb to NULL when flow control fails
|
|
Add myself as an additional maintainer for the Broadcom mobile
SoCs.
Signed-off-by: Matt Porter <mporter@linaro.org>
Acked-by: Christian Daudt <bcm@fixthebug.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
'regulator/fix/max14577' and 'regulator/fix/s5m8767' into regulator-linus
|
|
|
|
This reverts commit d8a5dc3033af2fd6d16030d2ee4fbd073460fe54.
This breaks plymouth installs, either because plymouth is using the file
"incorrectly" or because the patch is incorrect. Either way, this needs
to be reverted until it is all figured out.
Reported-by: Josh Boyer <jwboyer@fedoraproject.org>
Reported-by: Ray Strode <halfline@gmail.com>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Werner Fink <werner@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixlets: a fair number of them resulting from the new
SCHED_DEADLINE code"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Remove useless dl_nr_total
sched/deadline: Test for CPU's presence explicitly
sched: Add 'flags' argument to sched_{set,get}attr() syscalls
sched: Fix information leak in sys_sched_getattr()
sched,numa: add cond_resched to task_numa_work
sched/core: Make dl_b->lock IRQ safe
sched/core: Fix sched_rt_global_validate
sched/deadline: Fix overflow to handle period==0 and deadline!=0
sched/deadline: Fix bad accounting of nr_running
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixlets from all around the place"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore: Fix IVT/SNB-EP uncore CBOX NID filter table
perf/x86: Correctly use FEATURE_PDCM
perf, nmi: Fix unknown NMI warning
perf trace: Fix ioctl 'request' beautifier build problems on !(i386 || x86_64) arches
perf trace: Add fallback definition of EFD_SEMAPHORE
perf list: Fix checking for supported events on older kernels
perf tools: Handle PERF_RECORD_HEADER_EVENT_TYPE properly
perf probe: Do not add offset twice to uprobe address
perf/x86: Fix Userspace RDPMC switch
perf/x86/intel/p6: Add userspace RDPMC quirk for PPro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Fix writing the minimum temperature in max1668 driver"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (max1668) Fix writing the minimum temperature
|
|
Pull xfs fixes from Dave Chinner:
"This is the first pull request I've had to do for you, so I'm still
sorting things out. The reason I'm sending this and not Ben should be
obvious from the first commit below - SGI has stepped down from the
XFS maintainership role. As such, I'd like to take another
opportunity to thank them for their many years of effort maintaining
XFS and supporting the XFS community that they developed from the
ground up.
So I haven't had time to work things like signed tags into my
workflows yet, so this is just a repo branch I'm asking you to pull
from. And yes, I named the branch -rc4 because I wanted the fixes in
rc4, not because the branch was for merging into -rc3. Probably not
right, either.
Anyway, I should have everything sorted out by the time the next merge
window comes around. If there's anything that you don't like in the
pull req, feel free to flame me unmercifully.
The changes are fixes for recent regressions and important thinkos in
verification code:
- a log vector buffer alignment issue on ia32
- timestamps on truncate got mangled
- primary superblock CRC validation fixes and error message
sanitisation"
* 'xfs-fixes-for-3.14-rc4' of git://oss.sgi.com/xfs/xfs:
xfs: limit superblock corruption errors to actual corruption
xfs: skip verification on initial "guess" superblock read
MAINTAINERS: SGI no longer maintaining XFS
xfs: xfs_sb_read_verify() doesn't flag bad crcs on primary sb
xfs: ensure correct log item buffer alignment
xfs: ensure correct timestamp updates from truncate
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
* Handle PERF_RECORD_HEADER_EVENT_TYPE properly. (Jiri Olsa)
* Fix checking for supported events on older kernels in
'perf list' (Vince Weaver)
* Do not add offset twice to uprobe address in
'perf probe' (Masami Hiramatsu)
* Fix perf trace's ioctl 'request' beautifier build problems
on !(i386 || x86_64) arches (Arnaldo Carvalho de Melo)
* Fix 'perf trace' build by adding a fallback definition for
EFD_SEMAPHORE (Ben Hutchings)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This fixes bug introduced in 667a6b7a (regulator: max14577: Add missing
of_node_put). The DTS parsing function returned number of matched
regulators as success status which then was compared against 0 in probe.
Result was a probe fail after successful parsing the DTS:
max14577-regulator: probe of max14577-regulator failed with error 2
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviwed-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
into irq/urgent
irqchip mvebu fixes for v3.14
- orion:
- fixes for clearing bridge cause register, and clearing stale interrupts
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Pull devicetree fixes from Grant Likely:
"Device tree compatible match order bug fix
This branch contains a bug fix for the way devicetree code identifies
the type of device. Device drivers can contain a list of
of_device_ids, but it more than one entry will match, then the device
driver may choose the wrong one. Commit 105353145e, "match each node
compatible against all given matches first", was queued for v3.14 but
ended up causing other bugs. Commit 06b29e76a7 attempted to fix it
but it had other bugs. Merely reverting the fix and waiting until
v3.15 isn't a good option because there is code in v3.14 that depends
on the revised behaviour to boot.
This branch should finally fixes the problem correctly. This time
instead of just hoping that the patch is correct, this branch also
adds new testcases that validate the behaviour.
The changes in this branch are larger than I would like for a -rc
pull, but moving the test case data out of out of arch/arm so that it
could be validated on other architectures was important"
* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux:
of: Add self test for of_match_node()
of: Move testcase FDT data into drivers/of
of: reimplement the matching method for __of_match_node()
Revert "of: search the best compatible match first in __of_match_node()"
|
|
Pull watchdog fix from Wim Van Sebroeck:
"It corrects the error code when no device was found for w83697hf_wdt"
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: w83697hf_wdt: return ENODEV if no device was found
|
|
Enabling SPARSE_IRQ shows up a bug in the irq-orion bridge interrupt
handler. The bridge interrupt is implemented using a single generic
chip. Thus the parameter passed to irq_get_domain_generic_chip()
should always be zero.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Fixes: 9dbd90f17e4f ("irqchip: Add support for Marvell Orion SoCs")
Cc: <stable@vger.kernel.org> # v3.11+
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
|
This patch updates the CBOX PMU filters mapping tables for SNB-EP
and IVT (model 45 and 62 respectively).
The NID umask always comes in addition to another umask.
When set, the NID filter is applied.
The current mapping tables were missing some code/umask
combinations to account for the NID umask. This patch
fixes that.
Cc: mingo@elte.hu
Cc: ak@linux.intel.com
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140219131018.GA24475@quad
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The current code simply assumes Intel Arch PerfMon v2+ to have
the IA32_PERF_CAPABILITIES MSR; the SDM specifies that we should check
CPUID[1].ECX[15] (aka, FEATURE_PDCM) instead.
This was found by KVM which implements v2+ but didn't provide the
capabilities MSR. Change the code to DTRT; KVM will also implement the
MSR and return 0.
Cc: pbonzini@redhat.com
Reported-by: "Michael S. Tsirkin" <mst@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140203132903.GI8874@twins.programming.kicks-ass.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
When using BTS on Core i7-4*, I get the below kernel warning.
$ perf record -c 1 -e branches:u ls
Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
kernel:[ 438.317893] Uhhuh. NMI received for unknown reason 31 on CPU 2.
Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
kernel:[ 438.317920] Do you have a strange power saving mode enabled?
Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
kernel:[ 438.317945] Dazed and confused, but trying to continue
Make intel_pmu_handle_irq() take the full exit path when returning early.
Cc: eranian@google.com
Cc: peterz@infradead.org
Cc: mingo@kernel.org
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1392425048-5309-1-git-send-email-andi@firstfloor.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
ENDPTFLUSH and ENDPTPRIME registers are set by software and clear
by hardware. There is a bit for each endpoint. When we are setting
a bit for an endpoint we should make sure we do not touch other
endpoint bit. There is a race condition if the hardware clear the
bit between the read and the write in hw_write.
Cc: stable <stable@vger.kernel.org> # 3.11+
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
Tested-by: Michael Grzeschik <mgrzeschik@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The change (008fa749e0fe5b2fffd20b7fe4891bb80d072c6a) that moved the
node release code to a separate function broke death notifications in
some cases. When it encountered a reference without a death
notification request, it would skip looking at the remaining
references, and therefore fail to send death notifications for them.
Cc: Colin Cross <ccross@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Cc: stable <stable@vger.kernel.org> # 3.10
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In deadline class we do not have group scheduling like in RT.
dl_nr_total is the same as dl_nr_running. So, one of them should
be removed.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/368631392675853@web20h.yandex.ru
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|