summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2014-01-24arch/mips/lantiq/xway: don't check resource with devm_ioremap_resourceWolfram Sang1-4/+0
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6348/
2014-01-24bcma: gpio: don't cast u32 to unsigned longRafał Miłecki1-2/+2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6343/
2014-01-24ssb: gpio: add own IRQ domainRafał Miłecki4-21/+299
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Michael Buesch <m@bues.ch> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6342/
2014-01-24MIPS: BCM47XX: fix sparse warnings in board.cHauke Mehrtens1-10/+10
This fixes the following sparse warnings: arch/mips/bcm47xx/board.c:39:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:46:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:53:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:78:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:99:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:109:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:124:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:155:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:177:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:189:16: warning: Using plain integer as NULL pointer Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6318/
2014-01-24MIPS: BCM47XX: add board detection for Linksys WRT54GS V1Hauke Mehrtens2-0/+2
This adds board detection for Linksys WRT54GS V1. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6317/
2014-01-24MIPS: BCM47XX: fix detection for some boardsHauke Mehrtens1-6/+7
When a nvram reset was performed from CFE, it sometimes does not contain the productid value in nvram, but it still contains hardware_version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6316/
2014-01-24MIPS: BCM47XX: Enable buttons support on SSBRafał Miłecki1-8/+0
This is supported since implementing IRQ domain in ssb. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6315/
2014-01-24MIPS: BCM47XX: Convert WNDR4500 to new syntaxRafał Miłecki2-61/+14
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6313/
2014-01-24MIPS: BCM47XX: Use "timer" trigger for status LEDsRafał Miłecki1-2/+12
Some devices have power LED as well as status LED. The second one is used to show the firmware is up and running. Set "timer" trigger for such LEDs. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6312/
2014-01-24MIPS: BCM47XX: check length of serial console arrayHauke Mehrtens1-2/+4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6310/
2014-01-24bcma: prevent irq handler from firing when registeredHauke Mehrtens1-0/+3
With this patch we prevent the irq from being fired when it is registered. The Hardware fires an IRQ when input signal XOR polarity AND gpio mask is 1. Now we are setting polarity to a vlaue so that is is 0 when we register it. In addition we also set the irq mask register to 0 when the irq handler is initialized, so all gpio irqs are masked and there will be no unexpected irq. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6304/
2014-01-24MIPS: bcm63xx: cpu: Replace BUG() with panic()Markos Chandras1-2/+4
BUG() can be a noop if CONFIG_BUG is not selected, leading to the following build problem on a randconfig: arch/mips/bcm63xx/cpu.c: In function 'detect_cpu_clock': arch/mips/bcm63xx/cpu.c:254:1: error: control reaches end of non-void function [-Werror=return-type] We fix this problem by replacing BUG() with panic() since it's best to handle the case of an unknown board instead of silently returning a random clock frequency. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Acked-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5932/
2014-01-24MIPS: BCM47XX: Drop WGT634U hacksRafał Miłecki2-175/+0
This old wgt634u.c was trying to implement a bit ugly support for Netgear WGT634U. It provided info about LED, flash mapping & layout and was trying to handle reset button. This is not needed anymore as we have replacement for all this stuff. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6302/
2014-01-24MIPS: BCM47XX: Import LEDs database from OpenWrtRafał Miłecki1-0/+494
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6298/
2014-01-24MIPS: BCM47XX: Import buttons database from OpenWrtRafał Miłecki1-0/+456
This includes all devices from OpenWrt's "diag" that we support in arch code (we have entries for in enum bcm47xx_board). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6301/
2014-01-24MIPS: BCM47XX: Prepare support for GPIO buttonsRafał Miłecki4-1/+100
So far this adds support for one Netgear model only, but it's designed and ready to add many more device. We could hopefully import database from OpenWrt. Support for SSB is currently disabled, because SSB doesn't implement IRQ domain yet. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6300/
2014-01-24MIPS: BCM47XX: Prepare support for LEDsRafał Miłecki5-1/+89
So far this is mostly just a proof of concept, database consists of a single device. Creating a nice iterateable array wasn't an option because devices have different amount of LEDs. And we don't want to waste memory just because of support for a device with dozens on LEDs. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6299/
2014-01-24MIPS: BCM47XX: do not use cpu_wait instruction on BCM4706Hauke Mehrtens1-0/+10
The BCM4706 has a problem with the CPU wait instruction. When r4k_wait or r4k_wait_irqoff is used will just hang and not return from a msleep(). Removing the cpu_wait functionality is a workaround for this problem. The BCM4716 does not have this problem. The BCM4706 SoC uses a MIPS 74K V4.9 CPU. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6288/
2014-01-24MIPS: BCM47XX: print board name in machine entry in cpuinfoHauke Mehrtens1-0/+2
This will add the board name to the machine entry in /proc/cpuinfo. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5864/
2014-01-24MIPS: Netlogic: Core wakeup improvementsJayachandran C2-9/+13
Move wakeup to after early console. This will allow us to display error messages when cores are not woken up. Also reduce the wait time for core to come up. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6303/
2014-01-24MIPS: Netlogic: Remove XLR early serial setupJayachandran C3-27/+2
The early serial code is not needed because we already have early printk support provided by common/earlycons.c This change also fixes the following build error that occurs when CONFIG_SERIAL_8250 is not configured for Netlogic XLR boards: arch/mips/built-in.o: In function `nlm_early_serial_setup': setup.c:(.init.text+0x274): undefined reference to `early_serial_setup' make: *** [vmlinux] Error 1 Reported-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6083/
2014-01-24MIPS: Netlogic: Add default DTB for XLP9XX SoCJayachandran C4-1/+92
Add a default device tree fie for XLP9XX boards, and add code to use this device tree if no DTB is passed to the kernel. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6287/
2014-01-24MIPS: Netlogic: XLP9XX PIC OF supportJayachandran C1-6/+31
Support for adding legacy IRQ domain for XLP9XX. The node id of the PIC has to be calulated differently for XLP9XX. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6286/
2014-01-24MIPS: Netlogic: XLP9XX USB supportGanesan Ramalingam4-13/+84
XLP9XX has a USB 3.0 controller on-chip with 2 xHCI ports. The USB block is similar to the one on XLP2XX, so update usb-init-xlp2.c to handle XLP9XX as well. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6285/
2014-01-24MIPS: PCI: Netlogic XLP9XX supportJayachandran C4-23/+90
Add PCI support for Netlogic XLP9XX. The PCI registers and SoC bus numbers have changed in XLP9XX. Also skip a few (bus,dev,fn) combinations which have issues when read. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6284/
2014-01-24MIPS: Netlogic: Add cpu to node mapping for XLP9XXJayachandran C8-14/+33
XLP9XX has 20 cores per node, opposed to 8 on earlier XLP8XX. Update code that calculates node id from cpu id to handle this. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6283/
2014-01-24MIPS: Netlogic: XLP9XX bridge and DRAM codeJayachandran C2-44/+51
Update bridge code. Add code to the XLP9XX registers for DRAM size, limit and node when running on XLPXX Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6282/
2014-01-24MIPS: Netlogic: XLP9XX UART offsetJayachandran C2-1/+4
Update IO offset of the early console UART. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6281/
2014-01-24MIPS: Netlogic: SYS block updates of XLP9XXJayachandran C5-26/+84
Add the SYS block registers for XLP9XX, most of them have changed. The wakeup sequence has been updated to set the coherent mode from the main thread rather than the woken up thread. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6280/
2014-01-24MIPS: Netlogic: XLP9XX PIC updatesJayachandran C4-26/+65
Functions for the XLP9XX interrupt table entry format and other PIC register changes. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6279/
2014-01-24MIPS: Netlogic: update iomap.h for XLP9XXJayachandran C3-2/+48
Most IO block offsets have changed in XLP9XX. Update iomap.h to add the new addresses of different SoC blocks like PIC, SYS, UART etc. that are needed by the base code. On XLP9xx, the SoC blocks of other nodes are seen on a PCI bus corresponding to the node. Update iomap code to reflect this. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6277/
2014-01-24MIPS: Netlogic: Identify XLP 9XX chipJayachandran C4-1/+11
Adds processor ID of XLP 9XX to asm/cpu.h. Update netlogic/xlp-hal/xlp.h to add cpu_is_xlp9xx() and to update cpu_is_xlpii() to support XLP 9XX. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6274/
2014-01-24MIPS: Netlogic: Get coremask from FUSE registerJayachandran C1-5/+24
Use the FUSE register to get the list of active cores in the CPU instead of using the CPU reset register, this is the recommended method. Also add code to mask the coremask with the default number of cores for each processor series. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6275/
2014-01-24MIPS: Netlogic: Add macro for node presentJayachandran C2-4/+4
Add macro nlm_node_present() that can be used to check if a node is present in a multi-chip configuration. This can be used even when NUMA is not enabled. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6272/
2014-01-24MIPS: Netlogic: L1D cacheflush before thread enable on XLPIIYonghong Song1-2/+23
On XLPII CPUs, the L1D cache has to be flushed with regular cache operations before enabling threads in a core. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6276/
2014-01-24MIPS: Netlogic: Some cleanups for assembly codeJayachandran C2-15/+17
No change in logic, the changes are: * cleanup some whitespace and comments * remove confusing argument of SYS_CPU_COHERENT_BASE macro * make the numerical labels in macros consistent Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6273/
2014-01-24MIPS: Netlogic: Add topology.h for XLP familyJayachandran C3-18/+39
Add mach-netlogic/topology.h which contains XLP cpu number to core and node mapping. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6271/
2014-01-24MIPS: Netlogic: Add MSI support for XLPJayachandran C11-37/+586
Add MSI chip and MSIX chip definitions. For MSI, we map the link interrupt to a MSI link IRQ which will do a second level of dispatch based on the MSI status register. The MSI chip definitions use the MSI enable register to enable and disable the MSI irqs. For MSI-X, we split the 32 available MSI-X vectors across the four PCIe links (8 each). These PIC interrupts generate an IRQ per link which uses a second level dispatch as well. The MSI-X chip definition uses the standard functions to enable and disable interrupts. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6270/
2014-01-24MIPS: malta: Incorporate PIIX4 ACPI I/O region in PCI controller resourcesDeng-Cheng Zhu1-3/+3
Boot log says: pci 0000:00:0a.3: no compatible bridge window for [io 0x1000-0x103f] pci 0000:00:0a.3: no compatible bridge window for [io 0x1100-0x110f] The io resource starting point on Malta was modified by c5de50dada (MIPS: Malta: Change start address to avoid conflicts.) to avoid conflicts with ACPI and SMB devices. In fact, that was not needed (and now causing southbridge ACPI missing) since 166c637075 (PCI: add pci_create_root_bus() that accepts resource list) and 7c090e5bfa (mips/PCI: convert to pci_scan_root_bus() for correct root bus resources) had already done the correct fix. This patch actually reverts the change made by c5de50dada. And with this fix, log says: pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB These things may not be used but as part of platform resources are better off to be included. Cc: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6037/
2014-01-24MIPS: /proc/cpuinfo: always print the supported ISAAaro Koskinen1-20/+19
Currently the supported ISA is only printed on the latest architectures. Print it also on legacy platforms. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6295/
2014-01-24MIPS: jz4740: update platform data for JZ4740 usb device controllerApelete Seketeli3-16/+26
The platform data already available in tree for JZ4740 USB Device Controller was previously used by an out-of-tree USB gadget driver which was not relying on the musb driver and was written by Ingenic and the Qi-Hardware community. Update platform data for JZ4740 USB device controller to be used with musb driver. Signed-off-by: Apelete Seketeli <apelete@seketeli.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6265/
2014-01-24MIPS: Kill CONFIG_MTD_PARTITIONSEunbong Song11-11/+0
This patch removes CONFIG_MTD_PARTITIONS in config files for MIPS. Because CONFIG_MTD_PARTITIONS was removed by commit 6a8a98b22b10f1560d5f90aded4a54234b9b2724. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6162/ Signed-off-by: Eunbong Song <eunb.song@samsung.com>
2014-01-24MIPS: replace open-coded init_dspPaul Burton1-2/+1
There is already an init_dsp function which checks cpu_has_dsp & calls __init_dsp if it does. Make use of it instead of duplicating the same code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6148/
2014-01-24MIPS: clean up resume declarationPaul Burton1-4/+12
This patch cleans up the declaration of the resume function by replacing void pointers with their correct types. The irrelevant & incorrect comment preceeding the resume function is replaced by one documenting its function. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6146/
2014-01-24MIPS: qi_lb60: add defconfig for Ben NanoNoteApelete Seketeli1-0/+188
Add defconfig for the Ben NanoNote handheld computer which is built around QI_LB60 board and Ingenic JZ4740 MIPS SoC. Signed-off-by: Apelete Seketeli <apelete@seketeli.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6257/
2014-01-23bcma: gpio: add own IRQ domainRafał Miłecki3-2/+134
Input GPIO changes can generate interrupts, but we need kind of ACK for them by changing IRQ polarity. This is required to stop hardware from keep generating interrupts and generate another one on the next GPIO state change. This code allows using GPIOs with standard interrupts and add for example GPIO buttons support. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6216/
2014-01-23MIPS: include linux/types.hQais Yousef1-0/+1
The file uses u16 type but doesn't include its definition explicitly I was getting this error when including this header in my driver: arch/mips/include/asm/mipsregs.h:644:33: error: unknown type name ‘u16’ Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Reviewed-by: Steven J. Hill <Steven.Hill@imgtec.com> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6212/
2014-01-23MIPS: sead3: use unflatten_and_copy_device_tree()Qais Yousef1-10/+1
we want the device tree to be unflattened into non init memory so it can be accessed later by, for example, a probing function of a driver module. Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6210/
2014-01-23MIPS: sead3: populate platform devices from device treeQais Yousef1-0/+7
Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6209/
2014-01-23MIPS: sead3: remove chosen nodeQais Yousef1-4/+0
The defaults are not always applicable and it makes it hard for the bootloader to override them. By removing it we give the bootloader full control over what command line parameters to pass. Without this change we will need to modify the built-in dtb to add bootloader cmd line parameters or do some work to append them after we unflatten the device tree. Sead3 is a development board, that's why we want to be able to change boot parameters on the fly from the bootloader. Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6208/
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 02:47:01 +0000