summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-07-15nfs: document nfsv4 sillyrename issuesJ. Bruce Fields1-0/+8
Somebody working on this code asked what the deal was with NFSv4, since this comment notes that it's v2/v3's statelessness that requires sillyrename. Shouldn't hurt to document the answer. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15NFS: Convert nfs4_set_ds_client to EXPORT_SYMBOL_GPLTrond Myklebust1-1/+1
This is not part of an external ABI... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15SUNRPC: Convert the backchannel exports to EXPORT_SYMBOL_GPLTrond Myklebust3-4/+4
Ensure that the backchannel exports conform to the existing sunrpc practice. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15SUNRPC: sunrpc should not explicitly depend on NFS config optionsTrond Myklebust13-40/+39
Change explicit references to CONFIG_NFS_V4_1 to implicit ones Get rid of the unnecessary defines in backchannel_rqst.c and bc_svc.c: the Makefile takes care of those dependency. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15NFS: Clean up - simplify the switch to read/write-through-MDSTrond Myklebust5-13/+8
Use nfs_pageio_reset_read_mds and nfs_pageio_reset_write_mds instead of completely reinitialising the struct nfs_pageio_descriptor. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15NFS: Move the pnfs write code into pnfs.cTrond Myklebust7-37/+80
...and ensure that we recoalese to take into account differences in differences in block sizes when falling back to write through the MDS. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15NFS: Move the pnfs read code into pnfs.cTrond Myklebust7-41/+83
...and ensure that we recoalese to take into account differences in block sizes when falling back to read through the MDS. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15NFS: Allow the nfs_pageio_descriptor to signal that a re-coalesce is neededTrond Myklebust2-4/+56
If an attempt to do pNFS fails, and we have to fall back to writing through the MDS, then we may want to re-coalesce the requests that we already have since the block size for the MDS read/writes may be different to that of the DS read/writes. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15NFS: Use the nfs_pageio_descriptor->pg_bsize in the read/write requestTrond Myklebust2-2/+2
Instead of looking up the rsize and wsize, the routines that generate the RPC requests should really be using the pg_bsize, since that is what we use when deciding whether or not to coalesce write requests... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15NFS: Cache rpc_ops in struct nfs_pageio_descriptorTrond Myklebust3-24/+16
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15NFS: Clean up: split out the RPC transmission from nfs_pagein_multi/oneTrond Myklebust2-83/+102
...and do the same for nfs_flush_multi/one. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15NFS: fix return value of nfs_pagein_one/nfs_flush_onePeng Tao2-2/+3
Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFS: Clean up nfs_read_rpcsetup and nfs_write_rpcsetupTrond Myklebust3-32/+53
Split them up into two parts: one which sets up the struct nfs_read/write_data, the other which sets up the actual RPC call or pNFS call. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFS: Don't use DATA_SYNC writesTrond Myklebust1-4/+8
If we're writing back data, and the FLUSH_STABLE flag is set, then we always want to use NFS_FILE_SYNC, since we're always in a situation where we're doing page reclaim, and so we want to free up the page as quickly as possible. If we're in the FLUSH_COND_STABLE case, then we either want to use another unstable write (if we have to do a commit anyway) or again, we want to use NFS_FILE_SYNC because we know that we have no more pages to write out. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFSv4.1: do not use deviceids after MDS clientid invalidationAndy Adamson5-0/+47
Mark all deviceids established under an expired MDS clientid as invalid. Stop all new i/o through DS and send through the MDS. Don't use any new LAYOUTGETs that use the invalid deviceid. Purge all layouts established under the expired MDS clientid. Remove the MDS clientid deviceid and data servers reference Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFSv4.1: Clean up layoutreturnTrond Myklebust3-3/+5
Since we take a reference to it, we really ought to pass the a pointer to the layout header in the arguments instead of assuming that NFS_I(inode)->layout will forever point to the correct object. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12pnfs-obj: pnfs_osd_xdr: Remove dead code and cleanupBoaz Harrosh1-29/+2
* Some leftovers from ancient times. * This file will only define common types and client API. Remove server from comments Signed-off-by: Boaz Harrosh <Boaz Harrosh bharrosh@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFSv4.1: File layout only supports whole file layoutsAndy Adamson5-4/+57
Ask for whole file layouts. Until support for layout segments is fully supported in the file layout code, discard non-whole file layouts. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFSv4.1: Clean ups for the device id cacheTrond Myklebust2-34/+11
The fact that the global device id cache holds a reference to the nfs4_deviceid_node until it is invisible to rcu lookups implies that we can always assume that the reference count is non-zero in _find_get_deviceid. Also clean up nfs4_put_deviceid_node and the removal of the device id from the cache. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFSv4.1: Fall back to ordinary i/o through the mds if we have no layout segmentTrond Myklebust6-7/+15
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFSv4.1: Add an initialisation callback for pNFSTrond Myklebust8-59/+47
Ensure that we always get a layout before setting up the i/o request. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFS: Cleanup of the nfs_pageio code in preparation for a pnfs bugfixTrond Myklebust8-41/+131
We need to ensure that the layouts are set up before we can decide to coalesce requests. To do so, we want to further split up the struct nfs_pageio_descriptor operations into an initialisation callback, a coalescing test callback, and a 'do i/o' callback. This patch cleans up the existing callback methods before adding the 'initialisation' callback. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFS: test and free stateids during recoveryBryan Schumaker1-3/+34
When recovering open files and locks, the stateid should be tested against the server and freed if it is invalid. This patch adds new recovery functions for NFS v4.1. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFS: added FREE_STATEID callBryan Schumaker4-0/+121
FREE_STATEID is used to tell the server that we want to free a stateid that no longer has any locks associated with it. This allows the client to reclaim locks without encountering edge conditions documented in section 8.4.3 of RFC 5661. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFS: Added TEST_STATEID callBryan Schumaker4-0/+130
This patch adds in the xdr for doing a TEST_STATEID call with a single stateid. RFC 5661 allows multiple stateids to be tested in a single call, but only testing one keeps things simpler for now. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFS: Add SECINFO_NO_NAME procedureBryan Schumaker7-2/+166
If the client is using NFS v4.1, then we can use SECINFO_NO_NAME to find the secflavor for the initial mount. If the server doesn't support SECINFO_NO_NAME then I fall back on the "guess and check" method used for v4.0 mounts. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFS: move pnfs layouts to nfs_server structureWeston Andros Adamson4-28/+48
Layouts should be tracked per nfs_server (aka superblock) instead of per struct nfs_client, which may have multiple FSIDs associated with it. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFS: fix commentWeston Andros Adamson1-1/+1
We support IPv4 and IPv6 now. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFS: use scope from exchange_id to skip reclaimWeston Andros Adamson7-2/+55
can be skipped if the "eir_server_scope" from the exchange_id proc differs from previous calls. Also, in the future server_scope will be useful for determining whether client trunking is available Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFS: pnfs: loop over multipath addrs on connectWeston Andros Adamson1-5/+9
Don't just use the first addr in the multipath list - instead, loop over addresses when calling nfs4_set_ds_client() (which calls connect) until it is successful. Although this is not real multipath support, it's a quick fix to handle when an MDS sends a list of addresses for a DS and some of the addr families are unsupported or misconfigured (like no routable ipv6 addr assigned). This will attempt all paths to the DS before giving up, instead of immediately falling back to the MDS. As before, an error encountered after a successful connect() will cause all i/o to fall back to the MDS. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFS: Parse and store all multipath DS addressesWeston Andros Adamson2-132/+243
This parses and stores all addresses associated with each data server, laying the groundwork for supporting multipath to data servers. - Skips over addresses that cannot be parsed (ie IPv6 addrs if v6 is not enabled). Only fails if none of the addresses are recognizable - Currently only uses the first address that parsed cleanly - Tested against pynfs server (modified to support multipath) Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFS: pnfs IPv6 supportWeston Andros Adamson3-76/+191
Handle ipv6 remote addresses from GETDEVICEINFO - supports netid "tcp" for ipv4 and "tcp6" for ipv6 as rfc 5665 specifies - added ds_remotestr to avoid having to handle different AFs in every dprintk - tested against pynfs 4.1 server, submitting ipv6 support patch to pynfs - tested with IPv6 disabled, it compiles cleanly and relies on rpc_pton to refuse to accept IPv6 addresses Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12lockd: properly convert be32 values in debug messagesVasily Averin1-3/+6
lockd: server returns status 50331648 it's quite hard to understand that number in this message is 3 in big endian Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12sunrpc: use dprint_status() macro in call_decode()Vasily Averin1-2/+1
common dprint_status() macro is used in all callbacks but not in call_decode() Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12SUNRPC: Fix use of static variable in rpcb_getport_asyncBen Greear1-1/+1
Because struct rpcbind_args *map was declared static, if two threads entered this method at the same time, the values assigned to map could be sent two two differen tasks. This could cause all sorts of problems, include use-after-free and double-free of memory. Fix this by removing the static declaration so that the map pointer is on the stack. Signed-off-by: Ben Greear <greearb@candelatech.com> Cc: stable@kernel.org Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-11NFSv4.1: update nfs4_fattr_bitmap_maxszAndy Adamson1-1/+1
Attribute IDs assigned in RFC 5661 now require three bitmaps. Fixes hitting a BUG_ON in xdr_shrink_bufhead when getting ACLs. Signed-off-by: Andy Adamson <andros@netapp.com> Cc:stable@kernel.org [2.6.39] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-07SUNRPC: Fix a race between work-queue and rpc_killall_tasksTrond Myklebust1-16/+11
Since rpc_killall_tasks may modify the rpc_task's tk_action field without any locking, we need to be careful when dereferencing it. Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
2011-06-28pnfs: write: Set mds_offset in the generic layer - it is needed by all LDsBoaz Harrosh2-1/+2
In current pnfs tree, all the layouts set mds_offset in their .write_pagelist member. mds_offset is only used by generic layer and should be handled by it. This patch is for upstream. It is needed in this -rc series to fix a bug in objects layout_commit. I'll send patches for objects and blocks to be squashed into current pnfs tree. TODO: It looks like the read path needs the same patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-27Linux 3.0-rc5v3.0-rc5Linus Torvalds1-1/+1
2011-06-27drm/i915: more struct_mutex lockingHugh Dickins2-2/+6
When auditing the locking in i915_gem.c (for a prospective change which I then abandoned), I noticed two places where struct_mutex is not held across GEM object manipulations that would usually require it. Since one is in initial setup and the other in driver unload, I'm guessing the mutex is not required for either; but post a patch in case it is. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27drm/i915: use shmem_truncate_rangeHugh Dickins1-5/+2
The interface to ->truncate_range is changing very slightly: once "tmpfs: take control of its truncate_range" has been applied, this can be applied. For now there is only a slight inefficiency while this remains unapplied, but it will soon become essential for managing shmem's use of swap. Change i915_gem_object_truncate() to use shmem_truncate_range() directly: which should also spare i915 later change if we switch from inode_operations->truncate_range to file_operations->fallocate. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27drm/i915: use shmem_read_mapping_pageHugh Dickins2-17/+15
Soon tmpfs will stop supporting ->readpage and read_cache_page_gfp(): once "tmpfs: add shmem_read_mapping_page_gfp" has been applied, this patch can be applied to ease the transition. Make i915_gem_object_get_pages_gtt() use shmem_read_mapping_page_gfp() in the one place it's needed; elsewhere use shmem_read_mapping_page(), with the mapping's gfp_mask properly initialized. Forget about __GFP_COLD: since tmpfs initializes its pages with memset, asking for a cold page is counter-productive. Include linux/shmem_fs.h also in drm_gem.c: with shmem_file_setup() now declared there too, we shall remove the prototype from linux/mm.h later. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27drm/ttm: use shmem_read_mapping_pageHugh Dickins1-2/+3
Soon tmpfs will stop supporting ->readpage and read_mapping_page(): once "tmpfs: add shmem_read_mapping_page_gfp" has been applied, this patch can be applied to ease the transition. ttm_tt_swapin() and ttm_tt_swapout() use shmem_read_mapping_page() in place of read_mapping_page(), since their swap_space has been created with shmem_file_setup(). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27drivers/tty/serial/8250_pci.c: fix warningAndrew Morton1-1/+1
Fis the warning drivers/tty/serial/8250_pci.c:1457: warning: initialization from incompatible pointer type Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27drivers/misc/ioc4.c: fix section mismatch / race conditionRalf Baechle1-1/+1
Fix this section mismatch: WARNING: drivers/misc/ioc4.o(.data+0x144): Section mismatch in reference from the variable ioc4_load_modules_work to the function .devinit.text:ioc4_load_modules() The variable ioc4_load_modules_work references the function __devinit ioc4_load_modules() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console This one is potentially fatal; by the time ioc4_load_modules is invoked it may already have been freed. For that reason ioc4_load_modules_work can't be turned to __devinitdata but also because it's referenced in ioc4_exit. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Brent Casavant <bcasavan@sgi.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27drivers/leds/leds-lp5523.c: fix section mismatchesRalf Baechle1-2/+2
Fix this section mismatch: WARNING: drivers/leds/leds-lp5523.o(.text+0x12f4): Section mismatch in reference from the function lp5523_probe() to the function .init.text:lp5523_init_led() The function lp5523_probe() references the function __init lp5523_init_led(). This is often because lp5523_probe lacks a __init annotation or the annotation of lp5523_init_led is wrong. Fixing this one triggers one more mismatch, fix that one as well. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27drivers/leds/leds-lp5521.c: fix section mismatchesRalf Baechle1-2/+2
Fix this section mismatch: WARNING: drivers/leds/leds-lp5521.o(.text+0xf2c): Section mismatch in reference from the function lp5521_probe() to the function .init.text:lp5521_init_led() The function lp5521_probe() references the function __init lp5521_init_led(). This is often because lp5521_probe lacks a __init annotation or the annotation of lp5521_init_led is wrong. Fixing this mismatch triggers one more mismatch, fix that one as well. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27memcg: fix direct softlimit reclaim to be called in limit pathKAMEZAWA Hiroyuki1-12/+15
Commit d149e3b25d7c ("memcg: add the soft_limit reclaim in global direct reclaim") adds a softlimit hook to shrink_zones(). By this, soft limit is called as try_to_free_pages() do_try_to_free_pages() shrink_zones() mem_cgroup_soft_limit_reclaim() Then, direct reclaim is memcg softlimit hint aware, now. But, the memory cgroup's "limit" path can call softlimit shrinker. try_to_free_mem_cgroup_pages() do_try_to_free_pages() shrink_zones() mem_cgroup_soft_limit_reclaim() This will cause a global reclaim when a memcg hits limit. This is bug. soft_limit_reclaim() should be called when scanning_global_lru(sc) == true. And the commit adds a variable "total_scanned" for counting softlimit scanned pages....it's not "total". This patch removes the variable and update sc->nr_scanned instead of it. This will affect shrink_slab()'s scan condition but, global LRU is scanned by softlimit and I think this change makes sense. TODO: avoid too much scanning of a zone when softlimit did enough work. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Ying Han <yinghan@google.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27taskstats: don't allow duplicate entries in listener modeVasiliy Kulikov1-3/+12
Currently a single process may register exit handlers unlimited times. It may lead to a bloated listeners chain and very slow process terminations. Eg after 10KK sent TASKSTATS_CMD_ATTR_REGISTER_CPUMASKs ~300 Mb of kernel memory is stolen for the handlers chain and "time id" shows 2-7 seconds instead of normal 0.003. It makes it possible to exhaust all kernel memory and to eat much of CPU time by triggerring numerous exits on a single CPU. The patch limits the number of times a single process may register itself on a single CPU to one. One little issue is kept unfixed - as taskstats_exit() is called before exit_files() in do_exit(), the orphaned listener entry (if it was not explicitly deregistered) is kept until the next someone's exit() and implicit deregistration in send_cpu_listeners(). So, if a process registered itself as a listener exits and the next spawned process gets the same pid, it would inherit taskstats attributes. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27mm: fix assertion mapping->nrpages == 0 in end_writeback()Jan Kara3-0/+13
Under heavy memory and filesystem load, users observe the assertion mapping->nrpages == 0 in end_writeback() trigger. This can be caused by page reclaim reclaiming the last page from a mapping in the following race: CPU0 CPU1 ... shrink_page_list() __remove_mapping() __delete_from_page_cache() radix_tree_delete() evict_inode() truncate_inode_pages() truncate_inode_pages_range() pagevec_lookup() - finds nothing end_writeback() mapping->nrpages != 0 -> BUG page->mapping = NULL mapping->nrpages-- Fix the problem by doing a reliable check of mapping->nrpages under mapping->tree_lock in end_writeback(). Analyzed by Jay <jinshan.xiong@whamcloud.com>, lost in LKML, and dug out by Miklos Szeredi <mszeredi@suse.de>. Cc: Jay <jinshan.xiong@whamcloud.com> Cc: Miklos Szeredi <mszeredi@suse.de> Signed-off-by: Jan Kara <jack@suse.cz> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 02:39:31 +0000