summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2020-07-16Merge tag 'tty-5.8-rc6' of ↵Linus Torvalds6-108/+134
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty into master Pull tty/serial driver fixes from Greg KH: :Here are some small tty and serial driver fixes for 5.8-rc6. The largest set of patches in here is a revert of the sysrq changes that went into 5.8-rc1 but turned out to cause a noticable overhead and cpu usage. Other than that, there's a few small serial driver fixes to resolve reported issues, and finally resolving the spinlock init problem on many serial driver consoles. All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: core: Initialise spin lock before use in uart_configure_port() serial: mxs-auart: add missed iounmap() in probe failure and remove serial: sh-sci: Initialize spinlock for uart console Revert "tty: xilinx_uartps: Fix missing id assignment to the console" serial: core: drop redundant sysrq checks serial: core: fix sysrq overhead regression Revert "serial: core: Refactor uart_unlock_and_check_sysrq()" tty/serial: fix serial_core.c kernel-doc warnings tty: serial: cpm_uart: Fix behaviour for non existing GPIOs
2020-07-16Merge tag 'thermal-v5.8-rc6' of ↵Linus Torvalds3-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux into master Pull thermal fixes from Daniel Lezcano: - Fix invalid index array access on int340x_thermal leading to a kernel panic (Bartosz Szczepanek) - Fix debug message level to prevent flooding on some platform (Alex Hung) - Fix invalid bank access by reverting "thermal: mediatek: fix register index error" (Enric Balletbo i Serra) * tag 'thermal-v5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: Revert "thermal: mediatek: fix register index error" thermal: int3403_thermal: Downgrade error message thermal/int340x_thermal: Prevent page fault on .set_mode() op
2020-07-16Merge branch 'pm-cpufreq'Rafael J. Wysocki1-2/+6
* pm-cpufreq: cpufreq: intel_pstate: Fix active mode setting from command line
2020-07-16Merge tag 'usb-serial-5.8-rc6' of ↵Greg Kroah-Hartman1-3/+5
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.8-rc6 Here's a fix for 5.8 addressing a long-standing bug in iuu_phoenix. * tag 'usb-serial-5.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: iuu_phoenix: fix memory corruption
2020-07-16x86: math-emu: Fix up 'cmp' insn for clang iasArnd Bergmann1-1/+1
The clang integrated assembler requires the 'cmp' instruction to have a length prefix here: arch/x86/math-emu/wm_sqrt.S:212:2: error: ambiguous instructions require an explicit suffix (could be 'cmpb', 'cmpw', or 'cmpl') cmp $0xffffffff,-24(%ebp) ^ Make this a 32-bit comparison, which it was clearly meant to be. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lkml.kernel.org/r/20200527135352.1198078-1-arnd@arndb.de
2020-07-16x86/entry: Fix vectors to IDTENTRY_SYSVEC for CONFIG_HYPERVSedat Dilek1-2/+2
When assembling with Clang via `make LLVM_IAS=1` and CONFIG_HYPERV enabled, we observe the following error: <instantiation>:9:6: error: expected absolute expression .if HYPERVISOR_REENLIGHTENMENT_VECTOR == 3 ^ <instantiation>:1:1: note: while in macro instantiation idtentry HYPERVISOR_REENLIGHTENMENT_VECTOR asm_sysvec_hyperv_reenlightenment sysvec_hyperv_reenlightenment has_error_code=0 ^ ./arch/x86/include/asm/idtentry.h:627:1: note: while in macro instantiation idtentry_sysvec HYPERVISOR_REENLIGHTENMENT_VECTOR sysvec_hyperv_reenlightenment; ^ <instantiation>:9:6: error: expected absolute expression .if HYPERVISOR_STIMER0_VECTOR == 3 ^ <instantiation>:1:1: note: while in macro instantiation idtentry HYPERVISOR_STIMER0_VECTOR asm_sysvec_hyperv_stimer0 sysvec_hyperv_stimer0 has_error_code=0 ^ ./arch/x86/include/asm/idtentry.h:628:1: note: while in macro instantiation idtentry_sysvec HYPERVISOR_STIMER0_VECTOR sysvec_hyperv_stimer0; This is caused by typos in arch/x86/include/asm/idtentry.h: HYPERVISOR_REENLIGHTENMENT_VECTOR -> HYPERV_REENLIGHTENMENT_VECTOR HYPERVISOR_STIMER0_VECTOR -> HYPERV_STIMER0_VECTOR For more details see ClangBuiltLinux issue #1088. Fixes: a16be368dd3f ("x86/entry: Convert various hypervisor vectors to IDTENTRY_SYSVEC") Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Wei Liu <wei.liu@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1088 Link: https://github.com/ClangBuiltLinux/linux/issues/1043 Link: https://lore.kernel.org/patchwork/patch/1272115/ Link: https://lkml.kernel.org/r/20200714194740.4548-1-sedat.dilek@gmail.com
2020-07-16x86/entry: Add compatibility with IASJian Cai1-8/+6
Clang's integrated assembler does not allow symbols with non-absolute values to be reassigned. Modify the interrupt entry loop macro to be compatible with IAS by using a label and an offset. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Suggested-by: Brian Gerst <brgerst@gmail.com> Suggested-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Jian Cai <caij2003@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Link: https://github.com/ClangBuiltLinux/linux/issues/1043 Link: https://lkml.kernel.org/r/20200714233024.1789985-1-caij2003@gmail.com
2020-07-16Merge branch 'nvme-5.8' of git://git.infradead.org/nvme into block-5.8Jens Axboe2-0/+14
Pull NVMe fix from Christoph. * 'nvme-5.8' of git://git.infradead.org/nvme: nvme: explicitly update mpath disk capacity on revalidation
2020-07-16Merge branch 'opp/fixes' of ↵Rafael J. Wysocki1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull an operating performance points (OPP) framework fix for 5.8-rc6 from Viresh Kumar: "This fixes freeing of the OPP entries for the legacy OPP table type (v1)." * 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Increase parsed_static_opps in _of_add_opp_table_v1()
2020-07-16nvme: explicitly update mpath disk capacity on revalidationAnthony Iliopoulos2-0/+14
Commit 3b4b19721ec652 ("nvme: fix possible deadlock when I/O is blocked") reverted multipath head disk revalidation due to deadlocks caused by holding the bd_mutex during revalidate. Updating the multipath disk blockdev size is still required though for userspace to be able to observe any resizing while the device is mounted. Directly update the bdev inode size to avoid unnecessarily holding the bdev->bd_mutex. Fixes: 3b4b19721ec652 ("nvme: fix possible deadlock when I/O is blocked") Signed-off-by: Anthony Iliopoulos <ailiop@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-16arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEPWill Deacon1-2/+2
Rather than open-code test_tsk_thread_flag() at each callsite, simply replace the couple of offenders with calls to test_tsk_thread_flag() directly. Signed-off-by: Will Deacon <will@kernel.org>
2020-07-16arm64: ptrace: Use NO_SYSCALL instead of -1 in syscall_trace_enter()Will Deacon1-2/+2
Setting a system call number of -1 is special, as it indicates that the current system call should be skipped. Use NO_SYSCALL instead of -1 when checking for this scenario, which is different from the -1 returned due to a seccomp failure. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Keno Fischer <keno@juliacomputing.com> Cc: Luis Machado <luis.machado@linaro.org> Signed-off-by: Will Deacon <will@kernel.org>
2020-07-16arm64: syscall: Expand the comment about ptrace and syscall(-1)Will Deacon1-1/+15
If a task executes syscall(-1), we intercept this early and force x0 to be -ENOSYS so that we don't need to distinguish this scenario from one where the scno is -1 because a tracer wants to skip the system call using ptrace. With the return value set, the return path is the same as the skip case. Although there is a one-line comment noting this in el0_svc_common(), it misses out most of the detail. Expand the comment to describe a bit more about what is going on. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Keno Fischer <keno@juliacomputing.com> Cc: Luis Machado <luis.machado@linaro.org> Signed-off-by: Will Deacon <will@kernel.org>
2020-07-16arm64: ptrace: Add a comment describing our syscall entry/exit trap ABIWill Deacon1-2/+14
Our tracehook logic for syscall entry/exit raises a SIGTRAP back to the tracer following a ptrace request such as PTRACE_SYSCALL. As part of this procedure, we clobber the reported value of one of the tracee's general purpose registers (x7 for native tasks, r12 for compat) to indicate whether the stop occurred on syscall entry or exit. This is a slightly unfortunate ABI, as it prevents the tracer from accessing the real register value and is at odds with other similar stops such as seccomp traps. Since we're stuck with this ABI, expand the comment in our tracehook logic to acknowledge the issue and describe the behaviour in more detail. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Luis Machado <luis.machado@linaro.org> Reported-by: Keno Fischer <keno@juliacomputing.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-07-16arm64: compat: Ensure upper 32 bits of x0 are zero on syscall returnWill Deacon2-1/+14
Although we zero the upper bits of x0 on entry to the kernel from an AArch32 task, we do not clear them on the exception return path and can therefore expose 64-bit sign extended syscall return values to userspace via interfaces such as the 'perf_regs' ABI, which deal exclusively with 64-bit registers. Explicitly clear the upper 32 bits of x0 on return from a compat system call. Cc: <stable@vger.kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Keno Fischer <keno@juliacomputing.com> Cc: Luis Machado <luis.machado@linaro.org> Signed-off-by: Will Deacon <will@kernel.org>
2020-07-16arm64: ptrace: Override SPSR.SS when single-stepping is enabledWill Deacon3-6/+20
Luis reports that, when reverse debugging with GDB, single-step does not function as expected on arm64: | I've noticed, under very specific conditions, that a PTRACE_SINGLESTEP | request by GDB won't execute the underlying instruction. As a consequence, | the PC doesn't move, but we return a SIGTRAP just like we would for a | regular successful PTRACE_SINGLESTEP request. The underlying problem is that when the CPU register state is restored as part of a reverse step, the SPSR.SS bit is cleared and so the hardware single-step state can transition to the "active-pending" state, causing an unexpected step exception to be taken immediately if a step operation is attempted. In hindsight, we probably shouldn't have exposed SPSR.SS in the pstate accessible by the GPR regset, but it's a bit late for that now. Instead, simply prevent userspace from configuring the bit to a value which is inconsistent with the TIF_SINGLESTEP state for the task being traced. Cc: <stable@vger.kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Keno Fischer <keno@juliacomputing.com> Link: https://lore.kernel.org/r/1eed6d69-d53d-9657-1fc9-c089be07f98c@linaro.org Reported-by: Luis Machado <luis.machado@linaro.org> Tested-by: Luis Machado <luis.machado@linaro.org> Signed-off-by: Will Deacon <will@kernel.org>
2020-07-16arm64: ptrace: Consistently use pseudo-singlestep exceptionsWill Deacon4-16/+23
Although the arm64 single-step state machine can be fast-forwarded in cases where we wish to generate a SIGTRAP without actually executing an instruction, this has two major limitations outside of simply skipping an instruction due to emulation. 1. Stepping out of a ptrace signal stop into a signal handler where SIGTRAP is blocked. Fast-forwarding the stepping state machine in this case will result in a forced SIGTRAP, with the handler reset to SIG_DFL. 2. The hardware implicitly fast-forwards the state machine when executing an SVC instruction for issuing a system call. This can interact badly with subsequent ptrace stops signalled during the execution of the system call (e.g. SYSCALL_EXIT or seccomp traps), as they may corrupt the stepping state by updating the PSTATE for the tracee. Resolve both of these issues by injecting a pseudo-singlestep exception on entry to a signal handler and also on return to userspace following a system call. Cc: <stable@vger.kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Tested-by: Luis Machado <luis.machado@linaro.org> Reported-by: Keno Fischer <keno@juliacomputing.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-07-16drivers/perf: Fix kernel panic when rmmod PMU modules during perf samplingQi Liu5-0/+5
When users try to remove PMU modules during perf sampling, kernel panic will happen because the pmu->read() is a NULL pointer here. INFO on HiSilicon hip08 platform as follow: pc : hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu] lr : hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu] sp : ffff800010103e90 x29: ffff800010103e90 x28: ffff0027db0c0e40 x27: ffffa29a76f129d8 x26: ffffa29a77ceb000 x25: ffffa29a773a5000 x24: ffffa29a77392000 x23: ffffddffe5943f08 x22: ffff002784285960 x21: ffff002784285800 x20: ffff0027d2e76c80 x19: ffff0027842859e0 x18: ffff80003498bcc8 x17: ffffa29a76afe910 x16: ffffa29a7583f530 x15: 16151a1512061a1e x14: 0000000000000000 x13: ffffa29a76f1e238 x12: 0000000000000001 x11: 0000000000000400 x10: 00000000000009f0 x9 : ffff8000107b3e70 x8 : ffff0027db0c1890 x7 : ffffa29a773a7000 x6 : 00000007f5131013 x5 : 00000007f5131013 x4 : 09f257d417c00000 x3 : 00000002187bd7ce x2 : ffffa29a38f0f0d8 x1 : ffffa29a38eae268 x0 : ffff0027d2e76c80 Call trace: hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu] hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu] __perf_event_read+0x1a0/0x1f8 flush_smp_call_function_queue+0xa0/0x160 generic_smp_call_function_single_interrupt+0x18/0x20 handle_IPI+0x31c/0x4dc gic_handle_irq+0x2c8/0x310 el1_irq+0xcc/0x180 arch_cpu_idle+0x4c/0x20c default_idle_call+0x20/0x30 do_idle+0x1b4/0x270 cpu_startup_entry+0x28/0x30 secondary_start_kernel+0x1a4/0x1fc To solve the above issue, current module should be registered to kernel, so that try_module_get() can be invoked when perf sampling starts. This adds the reference counting of module and could prevent users from removing modules during sampling. Reported-by: Haifeng Wang <wang.wanghaifeng@huawei.com> Signed-off-by: Qi Liu <liuqi115@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1594891165-8228-1-git-send-email-liuqi115@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-16ALSA: hda/realtek - fixup for yet another Intel reference boardPeiSen Hou1-0/+1
Add headset_jack for the intel reference board support with 10ec:1230. Signed-off-by: PeiSen Hou <pshou@realtek.com.tw> Link: https://lore.kernel.org/r/20200716090134.9811-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-16USB: serial: iuu_phoenix: fix memory corruptionJohan Hovold1-3/+5
The driver would happily overwrite its write buffer with user data in 256 byte increments due to a removed buffer-space sanity check. Fixes: 5fcf62b0f1f2 ("tty: iuu_phoenix: fix locking.") Cc: stable <stable@vger.kernel.org> # 2.6.31 Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-16ALSA: hda/realtek - Enable Speaker for ASUS UX563Kailang Yang1-0/+1
ASUS UX563 speaker can't output. Add quirk to link suitable model will enable it. This model also could enable headset Mic. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/96dee3ab01a04c28a7b44061e88009dd@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-16ALSA: hda/realtek - Enable Speaker for ASUS UX533 and UX534Kailang Yang1-0/+2
ASUS UX533 and UX534 speaker still can't output. End User feedback speaker didn't have output. Add this COEF value will enable it. Fixes: 4e051106730d ("ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294") Cc: <stable@vger.kernel.org> Signed-off-by: Kailang Yang <kailang@realtek.com> Link: https://lore.kernel.org/r/80334402a93b48e385f8f4841b59ae09@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-16ovl: fix lookup of indexed hardlinks with metacopyAmir Goldstein1-0/+4
We recently moved setting inode flag OVL_UPPERDATA to ovl_lookup(). When looking up an overlay dentry, upperdentry may be found by index and not by name. In that case, we fail to read the metacopy xattr and falsly set the OVL_UPPERDATA on the overlay inode. This caused a regression in xfstest overlay/033 when run with OVERLAY_MOUNT_OPTIONS="-o metacopy=on". Fixes: 28166ab3c875 ("ovl: initialize OVL_UPPERDATA in ovl_lookup()") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-07-16ovl: fix unneeded call to ovl_change_flags()Amir Goldstein1-4/+6
The check if user has changed the overlay file was wrong, causing unneeded call to ovl_change_flags() including taking f_lock on every file access. Fixes: d989903058a8 ("ovl: do not generate duplicate fsnotify events for "fake" path") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-07-16opp: Increase parsed_static_opps in _of_add_opp_table_v1()Walter Lozano1-0/+4
Currently, when using _of_add_opp_table_v2 parsed_static_opps is increased and this value is used in _opp_remove_all_static() to check if there are static opp entries that need to be freed. Unfortunately this does not happen when using _of_add_opp_table_v1(), which leads to warnings. This patch increases parsed_static_opps in _of_add_opp_table_v1() in a similar way as in _of_add_opp_table_v2(). Fixes: 03758d60265c ("opp: Replace list_kref with a local counter") Cc: v5.6+ <stable@vger.kernel.org> # v5.6+ Signed-off-by: Walter Lozano <walter.lozano@collabora.com> [ Viresh: Do the operation with lock held and set the value to 1 instead of incrementing it ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-07-15Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds3-8/+43
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux into master Pull clk fixes from Stephen Boyd: "A couple build fixes for issues exposed this merge window and a fix for the eMMC clk on AST2600 SoCs that fixes the rate that is calculated by the clk framework" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Specify IOMEM dependency for HSDK pll driver clk: AST2600: Add mux for EMMC clock clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER
2020-07-16Merge tag 'drm-intel-fixes-2020-07-15' of ↵Dave Airlie6-33/+39
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.8-rc6: - FBC w/a stride fix - Fix use-after-free fix on module reload - Ignore irq enabling on the virtual engines to fix device sleep - Use GTT when saving/restoring engine GPR - Fix selftest sort function Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87ft9t0vtt.fsf@intel.com
2020-07-16Merge tag 'drm-misc-fixes-2020-07-15' of ↵Dave Airlie3-6/+9
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes * aspeed: setup fbdev console after registering device; avoids warning and stacktrace in dmesg log * dmabuf: protect dmabuf->name with a spinlock; avoids sleeping in atomic context Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200715171756.GA18606@linux-uq9g
2020-07-16Merge branch 'vmwgfx-fixes-5.8' of ↵Dave Airlie1-4/+4
git://people.freedesktop.org/~sroland/linux into drm-fixes fix for black screens Signed-off-by: Dave Airlie <airlied@redhat.com> From: "Roland Scheidegger (VMware)" <rscheidegger.oss@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200715161843.21118-1-rscheidegger.oss@gmail.com
2020-07-15Merge tag 'platform-drivers-x86-v5.8-2' of ↵Linus Torvalds5-3/+17
git://git.infradead.org/linux-platform-drivers-x86 into master Pull x86 platform driver fixes from Andriy Shevchenko: "Small fixes for this cycle: - Fix procfs handling in Thinkpad ACPI driver - Fix battery management on new ASUS laptops - New IDs (Sapphire Rapids) in ISST tool" * tag 'platform-drivers-x86-v5.8-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: asus-wmi: allow BAT1 battery name platform/x86: ISST: Add new PCI device ids platform/x86: thinkpad_acpi: Revert "Use strndup_user() in dispatch_proc_write()"
2020-07-15Merge tag 'dmaengine-fix-5.8-rc6' of ↵Linus Torvalds20-60/+128
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine into master Pull dmaengine fixes from Vinod Koul: - update dmaengine tree location to kernel.org - dmatest fix for completing threads - driver fixes for k3dma, fsl-dma, idxd, ,tegra, and few other drivers * tag 'dmaengine-fix-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (21 commits) dmaengine: ioat setting ioat timeout as module parameter dmaengine: fsl-edma: fix wrong tcd endianness for big-endian cpu dmaengine: dmatest: stop completed threads when running without set channel dmaengine: fsl-edma-common: correct DSIZE_32BYTE dmaengine: dw: Initialize channel before each transfer dmaengine: idxd: fix misc interrupt handler thread unmasking dmaengine: idxd: cleanup workqueue config after disabling dmaengine: tegra210-adma: Fix runtime PM imbalance on error dmaengine: mcf-edma: Fix NULL pointer exception in mcf_edma_tx_handler dmaengine: fsl-edma: Fix NULL pointer exception in fsl_edma_tx_handler dmaengine: fsl-edma: Add lockdep assert for exported function dmaengine: idxd: fix hw descriptor fields for delta record dmaengine: ti: k3-udma: add missing put_device() call in of_xudma_dev_get() dmaengine: sh: usb-dmac: set tx_result parameters dmaengine: ti: k3-udma: Fix delayed_work usage for tx drain workaround dmaengine: idxd: fix cdev locking for open and release dmaengine: imx-sdma: Fix: Remove 'always true' comparison MAINTAINERS: switch dmaengine tree to kernel.org dmaengine: ti: k3-udma: Fix the running channel handling in alloc_chan_resources dmaengine: ti: k3-udma: Fix cleanup code for alloc_chan_resources ...
2020-07-15keys: asymmetric: fix error return code in software_key_query()Wei Yongjun1-0/+1
Fix to return negative error code -ENOMEM from kmalloc() error handling case instead of 0, as done elsewhere in this function. Fixes: f1774cb8956a ("X.509: parse public key parameters from x509 for akcipher") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-15afs: Fix interruption of operationsDavid Howells2-2/+3
The afs filesystem driver allows unstarted operations to be cancelled by signal, but most of these can easily be restarted (mkdir for example). The primary culprits for reproducing this are those applications that use SIGALRM to display a progress counter. File lock-extension operation is marked uninterruptible as we have a limited time in which to do it, and the release op is marked uninterruptible also as if we fail to unlock a file, we'll have to wait 20 mins before anyone can lock it again. The store operation logs a warning if it gets interruption, e.g.: kAFS: Unexpected error from FS.StoreData -4 because it's run from the background - but it can also be run from fdatasync()-type things. However, store options aren't marked interruptible at the moment. Fix this in the following ways: (1) Mark store operations as uninterruptible. It might make sense to relax this for certain situations, but I'm not sure how to make sure that background store ops aren't affected by signals to foreground processes that happen to trigger them. (2) In afs_get_io_locks(), where we're getting the serialisation lock for talking to the fileserver, return ERESTARTSYS rather than EINTR because a lot of the operations (e.g. mkdir) are restartable if we haven't yet started sending the op to the server. Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-16ovl: fix mount option checks for nfs_export with no upperdirAmir Goldstein2-15/+20
Without upperdir mount option, there is no index dir and the dependency checks nfs_export => index for mount options parsing are incorrect. Allow the combination nfs_export=on,index=off with no upperdir and move the check for dependency redirect_dir=nofollow for non-upper mount case to mount options parsing. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-07-16ovl: force read-only sb on failure to create index dirAmir Goldstein1-5/+6
With index feature enabled, on failure to create index dir, overlay is being mounted read-only. However, we do not forbid user to remount overlay read-write. Fix that by setting ofs->workdir to NULL, which prevents remount read-write. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-07-16ovl: fix regression with re-formatted lower squashfsAmir Goldstein1-0/+12
Commit 9df085f3c9a2 ("ovl: relax requirement for non null uuid of lower fs") relaxed the requirement for non null uuid with single lower layer to allow enabling index and nfs_export features with single lower squashfs. Fabian reported a regression in a setup when overlay re-uses an existing upper layer and re-formats the lower squashfs image. Because squashfs has no uuid, the origin xattr in upper layer are decoded from the new lower layer where they may resolve to a wrong origin file and user may get an ESTALE or EIO error on lookup. To avoid the reported regression while still allowing the new features with single lower squashfs, do not allow decoding origin with lower null uuid unless user opted-in to one of the new features that require following the lower inode of non-dir upper (index, xino, metacopy). Reported-by: Fabian <godi.beat@gmx.net> Link: https://lore.kernel.org/linux-unionfs/32532923.JtPX5UtSzP@fgdesktop/ Fixes: 9df085f3c9a2 ("ovl: relax requirement for non null uuid of lower fs") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-07-16ovl: fix oops in ovl_indexdir_cleanup() with nfs_export=onAmir Goldstein1-9/+7
Mounting with nfs_export=on, xfstests overlay/031 triggers a kernel panic since v5.8-rc1 overlayfs updates. overlayfs: orphan index entry (index/00fb1..., ftype=4000, nlink=2) BUG: kernel NULL pointer dereference, address: 0000000000000030 RIP: 0010:ovl_cleanup_and_whiteout+0x28/0x220 [overlay] Bisect point at commit c21c839b8448 ("ovl: whiteout inode sharing") Minimal reproducer: -------------------------------------------------- rm -rf l u w m mkdir -p l u w m mkdir -p l/testdir touch l/testdir/testfile mount -t overlay -o lowerdir=l,upperdir=u,workdir=w,nfs_export=on overlay m echo 1 > m/testdir/testfile umount m rm -rf u/testdir mount -t overlay -o lowerdir=l,upperdir=u,workdir=w,nfs_export=on overlay m umount m -------------------------------------------------- When mount with nfs_export=on, and fail to verify an orphan index, we're cleaning this index from indexdir by calling ovl_cleanup_and_whiteout(). This dereferences ofs->workdir, that was earlier set to NULL. The design was that ovl->workdir will point at ovl->indexdir, but we are assigning ofs->indexdir to ofs->workdir only after ovl_indexdir_cleanup(). There is no reason not to do it sooner, because once we get success from ofs->indexdir = ovl_workdir_create(... there is no turning back. Reported-and-tested-by: Murphy Zhou <jencce.kernel@gmail.com> Fixes: c21c839b8448 ("ovl: whiteout inode sharing") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-07-16ovl: relax WARN_ON() when decoding lower directory file handleAmir Goldstein1-1/+1
Decoding a lower directory file handle to overlay path with cold inode/dentry cache may go as follows: 1. Decode real lower file handle to lower dir path 2. Check if lower dir is indexed (was copied up) 3. If indexed, get the upper dir path from index 4. Lookup upper dir path in overlay 5. If overlay path found, verify that overlay lower is the lower dir from step 1 On failure to verify step 5 above, user will get an ESTALE error and a WARN_ON will be printed. A mismatch in step 5 could be a result of lower directory that was renamed while overlay was offline, after that lower directory has been copied up and indexed. This is a scripted reproducer based on xfstest overlay/052: # Create lower subdir create_dirs create_test_files $lower/lowertestdir/subdir mount_dirs # Copy up lower dir and encode lower subdir file handle touch $SCRATCH_MNT/lowertestdir test_file_handles $SCRATCH_MNT/lowertestdir/subdir -p -o $tmp.fhandle # Rename lower dir offline unmount_dirs mv $lower/lowertestdir $lower/lowertestdir.new/ mount_dirs # Attempt to decode lower subdir file handle test_file_handles $SCRATCH_MNT -p -i $tmp.fhandle Since this WARN_ON() can be triggered by user we need to relax it. Fixes: 4b91c30a5a19 ("ovl: lookup connected ancestor of dir in inode cache") Cc: <stable@vger.kernel.org> # v4.16+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-07-16ovl: remove not used argument in ovl_check_originyoungjun1-9/+2
ovl_check_origin outparam 'ctrp' argument not used by caller. So remove this argument. Signed-off-by: youngjun <her0gyugyu@gmail.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-07-16ovl: change ovl_copy_up_flags staticyoungjun2-2/+1
"ovl_copy_up_flags" is used in copy_up.c. so, change it static. Signed-off-by: youngjun <her0gyugyu@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-07-16ovl: inode reference leak in ovl_is_inuse true case.youngjun1-1/+10
When "ovl_is_inuse" true case, trap inode reference not put. plus adding the comment explaining sequence of ovl_is_inuse after ovl_setup_trap. Fixes: 0be0bfd2de9d ("ovl: fix regression caused by overlapping layers detection") Cc: <stable@vger.kernel.org> # v4.19+ Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: youngjun <her0gyugyu@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-07-15scsi: megaraid_sas: Remove undefined ENABLE_IRQ_POLL macroChandrakanth Patil1-2/+0
As the ENABLE_IRQ_POLL macro is undefined, the check for ENABLE_IRQ_POLL macro in ISR will always be false. This leads to irq polling being non-functional. Remove ENABLE_IRQ_POLL check from ISR. Link: https://lore.kernel.org/r/20200715120153.20512-1-chandrakanth.patil@broadcom.com Fixes: a6ffd5bf6819 ("scsi: megaraid_sas: Call disable_irq from process IRQ") Cc: <stable@vger.kernel.org> # v5.3+ Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15io_uring: fix recvmsg memory leak with buffer selectionPavel Begunkov1-2/+8
io_recvmsg() doesn't free memory allocated for struct io_buffer. This can causes a leak when used with automatic buffer selection. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-15arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschemaKrzysztof Kozlowski1-4/+4
Fix dtschema validator warnings like: intc@fffc1000: $nodename:0: 'intc@fffc1000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Fixes: 78cd6a9d8e15 ("arm64: dts: Add base stratix 10 dtsi") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2020-07-15ARM: dts: socfpga: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski2-2/+2
Fix dtschema validator warnings like: l2-cache@fffff000: $nodename:0: 'l2-cache@fffff000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Fixes: 475dc86d08de ("arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2020-07-15arm64: dts: stratix10: increase QSPI reg address in nand dts fileDinh Nguyen1-3/+3
Match the QSPI reg address in the socfpga_stratix10_socdk.dts file. Fixes: 80f132d73709 ("arm64: dts: increase the QSPI reg address for Stratix10 and Agilex") Cc: linux-stable <stable@vger.kernel.org> # >= v5.6 Signed-off-by: Dinh Nguyen <dinh.nguyen@intel.com>
2020-07-15arm64: dts: stratix10: add status to qspi dts nodeDinh Nguyen2-0/+2
Add status = "okay" to QSPI node. Fixes: 0cb140d07fc75 ("arm64: dts: stratix10: Add QSPI support for Stratix10") Cc: linux-stable <stable@vger.kernel.org> # >= v5.6 Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2020-07-15arm64: dts: agilex: add status to qspi dts nodeDinh Nguyen1-0/+1
Add status = "okay" to QSPI node. Fixes: c4c8757b2d895 ("arm64: dts: agilex: add QSPI support for Intel Agilex") Cc: linux-stable <stable@vger.kernel.org> # >= v5.5 Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2020-07-15xprtrdma: fix incorrect header size calculationsColin Ian King1-2/+2
Currently the header size calculations are using an assignment operator instead of a += operator when accumulating the header size leading to incorrect sizes. Fix this by using the correct operator. Addresses-Coverity: ("Unused value") Fixes: 302d3deb2068 ("xprtrdma: Prevent inline overflow") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-07-15hwmon: (scmi) Fix potential buffer overflow in scmi_hwmon_probe()Cristian Marussi1-1/+1
SMATCH detected a potential buffer overflow in the manipulation of hwmon_attributes array inside the scmi_hwmon_probe function: drivers/hwmon/scmi-hwmon.c:226 scmi_hwmon_probe() error: buffer overflow 'hwmon_attributes' 6 <= 9 Fix it by statically declaring the size of the array as the maximum possible as defined by hwmon_max define. Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20200715121338.GA18761@e119603-lin.cambridge.arm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-03 04:24:14 +0000