summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2008-02-08ARM: OMAP1: Use I2C bus registration helper for omap1Jarkko Nikula14-12/+17
This patch starts using introduced I2C bus registration helper by cleaning up registration currently done in various places and by doing necessary board file modifications. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP1: Remove omap_sram_idle()Vivek Kutal2-169/+1
This patch removes omap_sram_idle() that is no longer used. The function called in pm_idle is omap_sram_suspend, omap_sram_idle() is not used anywhere in omap1. Signed-off-by: Vivek Kutal <vivek.kutal@celunite.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP1: PM fixes for OMAP1Vivek Kutal1-5/+12
This patch does the following: - Fixes the omap_pm_idle() code so that we enter WFI mode in idle. - /sys/power/sleep_while_idle is created only when 32k timer is used Signed-off-by: Vivek Kutal <vivek.kutal@celunite.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP1: Use MMC multislot structures for Siemens SX1 boardCarlos Eduardo Aguiar4-27/+146
Use MMC multislot structures for Siemens SX1 board Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP1: Make omap1 use MMC multislot structuresFelipe Balbi9-14/+313
Make omap1 use new MMC multislot structures. The related MMC patches will be sent separately. Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br> Signed-off-by: Anderson Briglia <anderson.briglia@indt.org.br> Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: David Cohen <david.cohen@indt.org.br> Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP1: Change the comments to C styleDavid Cohen8-51/+50
Change the comments to C style Signed-off-by: David Cohen <david.cohen@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP1: Make omap1 boards to use omap_nand_platform_dataTony Lindgren5-16/+39
This patch adds omap_nand_platform data based on a patch by Shahrom Sharif-Kashani <sshahrom@micron.com>, and makes omap1 boards to use omap_nand_platform_data instead of nand_platform_data used earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP: Add helper module for board specific I2C bus registrationJarkko Nikula4-0/+162
This helper module simplifies I2C bus registration for different OMAP platforms by doing registration in one place only and to allow board specific bus configuration like clock rate and number of busses configured. Helper should cover OMAP processors from first to third generation. This patch just adds the feature and current implementation cleanup and board file modifications will be done in following patches. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP: Add dmtimer support for OMAP3Syed Mohammed, Khasim1-4/+47
Add DM timer support for OMAP3. Fixed source clocks for 3430 by Paul Walmsley <paul@pwsan.com>. Signed-off-by: Syed Mohammed Khasim <x0khasim@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP: Pre-3430 clean-up for dmtimer.cSyed Mohammed, Khasim1-24/+41
Cleanup DM timer list for OMAP2 and OMAP1 to allow adding support for 3430. Signed-off-by: Syed Mohammed Khasim <x0khasim@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP: Add DMA support for chaining and 3430Anand Gadiyar2-74/+905
Add DMA support for chaining and 3430. Also remove old DEBUG_PRINTS as noted by Russell King. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP: Add 24xx GPIO debounce supportKevin Hilman2-5/+57
Add 24xx GPIO debounce support. Also minor formatting clean-up. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP: Get rid of unnecessary ifdefs in GPIO codeTony Lindgren1-41/+6
Just use cpu_is_omapXXXX() instead. This does not increase object size. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP: Add 3430 gpio supportSyed Mohammed, Khasim2-35/+134
This patch adds 3430 gpio support. It also contains a fix by Paul Walmsley <paul@pwsan.com> to use the correct clock names for OMAP3430. Signed-off-by: Syed Mohammed Khasim <x0khasim@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP: Add 3430 CPU identification macrosSyed Mohammed Khasim1-6/+121
This patch adds omap3430 CPU identification macros. Silicon revision check macros added by Girish S G <girishsg@ti.com>. CPU identification macro and silicon revision check macros cleaned up by Paul Walmsley <paul@pwsan.com>. Signed-off-by: Syed Mohammed Khasim <x0khasim@ti.com> Signed-off-by: Girish S G <girishsg@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP: Request DSP memory for McBSPTony Lindgren1-0/+11
On OMAP1 some McBSP features depend on DSP. Also export polling functions as suggested by Luis Cargnini. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds15-483/+1372
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: (44 commits) dm raid1: report fault status dm raid1: handle read failures dm raid1: fix EIO after log failure dm raid1: handle recovery failures dm raid1: handle write failures dm snapshot: combine consecutive exceptions in memory dm: stripe enhanced status return dm: stripe trigger event on failure dm log: auto load modules dm: move deferred bio flushing to workqueue dm crypt: use async crypto dm crypt: prepare async callback fn dm crypt: add completion for async dm crypt: add async request mempool dm crypt: extract scatterlist processing dm crypt: tidy io ref counting dm crypt: introduce crypt_write_io_loop dm crypt: abstract crypt_write_done dm crypt: store sector mapping in dm_crypt_io dm crypt: move queue functions ...
2008-02-07Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds60-1731/+3689
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (59 commits) hwmon: (lm80) Add individual alarm files hwmon: (lm80) De-macro the sysfs callbacks hwmon: (lm80) Various cleanups hwmon: (w83627hf) Refactor beep enable handling hwmon: (w83627hf) Add individual alarm and beep files hwmon: (w83627hf) Enable VBAT monitoring hwmon: (w83627ehf) The W83627DHG has 8 VID pins hwmon: (asb100) Add individual alarm files hwmon: (asb100) De-macro the sysfs callbacks hwmon: (asb100) Various cleanups hwmon: VRM is not written to registers hwmon: (dme1737) fix Super-IO device ID override hwmon: (dme1737) fix divide-by-0 hwmon: (abituguru3) Add AUX4 fan input for Abit IP35 Pro hwmon: Add support for Texas Instruments/Burr-Brown ADS7828 hwmon: (adm9240) Add individual alarm files hwmon: (lm77) Add individual alarm files hwmon: Discard useless I2C driver IDs hwmon: (lm85) Make the pwmN_enable files writable hwmon: (lm85) Return standard values in pwmN_enable ...
2008-02-07Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds85-3184/+2303
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: (62 commits) [XFS] add __init/__exit mark to specific init/cleanup functions [XFS] Fix oops in xfs_file_readdir() [XFS] kill xfs_root [XFS] keep i_nlink updated and use proper accessors [XFS] stop updating inode->i_blocks [XFS] Make xfs_ail_check check less by default [XFS] Move AIL pushing into it's own thread [XFS] use generic_permission [XFS] stop re-checking permissions in xfs_swapext [XFS] clean up xfs_swapext [XFS] remove permission check from xfs_change_file_space [XFS] prevent panic during log recovery due to bogus op_hdr length [XFS] Cleanup various fid related bits: [XFS] Fix xfs_lowbit64 [XFS] Remove CFORK macros and use code directly in IFORK and DFORK macros. [XFS] kill superflous buffer locking (2nd attempt) [XFS] Use kernel-supplied "roundup_pow_of_two" for simplicity [XFS] Remove the BPCSHIFT and NB* based macros from XFS. [XFS] Remove bogus assert [XFS] optimize XFS_IS_REALTIME_INODE w/o realtime config ...
2008-02-07Convert SG from nopage to fault.Nick Piggin1-12/+11
Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Douglas Gilbert <dougg@torque.net> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Merge branch 'slub-linus' of ↵Linus Torvalds6-63/+457
git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm * 'slub-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm: SLUB: fix checkpatch warnings Use non atomic unlock SLUB: Support for performance statistics SLUB: Alternate fast paths using cmpxchg_local SLUB: Use unique end pointer for each slab page. SLUB: Deal with annoying gcc warning on kfree()
2008-02-08dm raid1: report fault statusJonathan Brassow1-8/+36
This patch adds extra information to the mirror status output, so that it can be determined which device(s) have failed. For each mirror device, a character is printed indicating the most severe error encountered. The characters are: * A => Alive - No failures * D => Dead - A write failure occurred leaving mirror out-of-sync * S => Sync - A sychronization failure occurred, mirror out-of-sync * R => Read - A read failure occurred, mirror data unaffected This allows userspace to properly reconfigure the mirror set. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm raid1: handle read failuresJonathan Brassow1-45/+211
This patch gives the ability to respond-to/record device failures that happen during read operations. It also adds the ability to read from mirror devices that are not the primary if they are in-sync. There are essentially two read paths in mirroring; the direct path and the queued path. When a read request is mapped, if the region is 'in-sync' the direct path is taken; otherwise the queued path is taken. If the direct path is taken, we must record bio information so that if the read fails we can retry it. We then discover the status of a direct read through mirror_end_io. If the read has failed, we will mark the device from which the read was attempted as failed (so we don't try to read from it again), restore the bio and try again. If the queued path is taken, we discover the results of the read from 'read_callback'. If the device failed, we will mark the device as failed and attempt the read again if there is another device where this region is known to be 'in-sync'. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm raid1: fix EIO after log failureJonathan Brassow1-11/+90
This patch adds the ability to requeue write I/O to core device-mapper when there is a log device failure. If a write to the log produces and error, the pending writes are put on the "failures" list. Since the log is marked as failed, they will stay on the failures list until a suspend happens. Suspends come in two phases, presuspend and postsuspend. We must make sure that all the writes on the failures list are requeued in the presuspend phase (a requirement of dm core). This means that recovery must be complete (because writes may be delayed behind it) and the failures list must be requeued before we return from presuspend. The mechanisms to ensure recovery is complete (or stopped) was already in place, but needed to be moved from postsuspend to presuspend. We rely on 'flush_workqueue' to ensure that the mirror thread is complete and therefore, has requeued all writes in the failures list. Because we are using flush_workqueue, we must ensure that no additional 'queue_work' calls will produce additional I/O that we need to requeue (because once we return from presuspend, we are unable to do anything about it). 'queue_work' is called in response to the following functions: - complete_resync_work = NA, recovery is stopped - rh_dec (mirror_end_io) = NA, only calls 'queue_work' if it is ready to recover the region (recovery is stopped) or it needs to clear the region in the log* **this doesn't get called while suspending** - rh_recovery_end = NA, recovery is stopped - rh_recovery_start = NA, recovery is stopped - write_callback = 1) Writes w/o failures simply call bio_endio -> mirror_end_io -> rh_dec (see rh_dec above) 2) Writes with failures are put on the failures list and queue_work is called** ** write_callbacks don't happen during suspend ** - do_failures = NA, 'queue_work' not called if suspending - add_mirror (initialization) = NA, only done on mirror creation - queue_bio = NA, 1) delayed I/O scheduled before flush_workqueue is called. 2) No more I/Os are being issued. 3) Re-attempted READs can still be handled. (Write completions are handled through rh_dec/ write_callback - mention above - and do not use queue_bio.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm raid1: handle recovery failuresJonathan Brassow1-3/+20
This patch adds the calls to 'fail_mirror' if an error occurs during mirror recovery (aka resynchronization). 'fail_mirror' is responsible for recording the type of error by mirror device and ensuring an event gets raised for the purpose of notifying userspace. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm raid1: handle write failuresJonathan Brassow1-26/+224
This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm snapshot: combine consecutive exceptions in memoryMilan Broz2-16/+116
Provided sector_t is 64 bits, reduce the in-memory footprint of the snapshot exception table by the simple method of using unused bits of the chunk number to combine consecutive entries. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm: stripe enhanced status returnBrian Wood1-1/+22
This patch adds additional information to the status line. It is added at the end of the returned text so it will not interfere with existing implementations using this data. The addition of this information will allow for a common return interface to match that returned with the dm-raid1.c status line (with Jonathan Brassow's patches). Here is a sample of what is returned with a mirror "status" call: isw_eeaaabgfg_mirror: 0 488390920 mirror 2 8:16 8:32 3727/3727 1 AA 1 core Here's what's returned with this patch for a stripe "status" call: isw_dheeijjdej_stripe: 0 976783872 striped 2 8:16 8:32 1 AA Signed-off-by: Brian Wood <brian.j.wood@intel.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm: stripe trigger event on failureBrian Wood1-1/+81
This patch adds the stripe_end_io function to process errors that might occur after an IO operation. As part of this there are a number of enhancements made to record and trigger events: - New atomic variable in struct stripe to record the number of errors each stripe volume device has experienced (could be used later with uevents to report back directly to userspace) - New workqueue/work struct setup to process the trigger_event function - New end_io function. It is here that testing for BIO error conditions take place. It determines the exact stripe that cause the error, records this in the new atomic variable, and calls the queue_work() function - New trigger_event function to process failure events. This calls dm_table_event() Signed-off-by: Brian Wood <brian.j.wood@intel.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm log: auto load modulesJonathan Brassow1-1/+50
If the log type is not recognised, attempt to load the module 'dm-log-<type>.ko'. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm: move deferred bio flushing to workqueueMilan Broz1-12/+67
Add a single-thread workqueue for each mapped device and move flushing of the lists of pushback and deferred bios to this new workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: use async cryptoMilan Broz1-59/+72
dm-crypt: Use crypto ablkcipher interface Move encrypt/decrypt core to async crypto call. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: prepare async callback fnMilan Broz1-4/+41
dm-crypt: Use crypto ablkcipher interface Prepare callback function for async crypto operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: add completion for asyncMilan Broz1-0/+21
dm-crypt: Use crypto ablkcipher interface Prepare completion for async crypto request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: add async request mempoolMilan Broz1-2/+43
dm-crypt: Use crypto ablkcipher interface Introduce mempool for async crypto requests. cc->req is used mainly during synchronous operations (to prevent allocation and deallocation of the same object). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: extract scatterlist processingMilan Broz1-24/+39
dm-crypt: Use crypto ablkcipher interface Move scatterlists to separate dm_crypt_struct and pick out block processing from crypt_convert. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: tidy io ref countingMilan Broz1-12/+8
Make io reference counting more obvious. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: introduce crypt_write_io_loopMilan Broz1-5/+11
Introduce crypt_write_io_loop(). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: abstract crypt_write_doneMilan Broz1-16/+25
Process write request in separate function and queue final bio through io workqueue. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: store sector mapping in dm_crypt_ioMilan Broz1-7/+7
Add sector into dm_crypt_io instead of using local variable. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: move queue functionsAlasdair G Kergon1-28/+26
Reorder kcryptd functions for clarity. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: adjust io processing functionsMilan Broz1-15/+25
Rename functions to follow calling convention. Prepare write io error processing function skeleton. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: tidy crypt_endioMilan Broz1-11/+6
Simplify crypt_endio function. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: move error setting outside crypt_dec_pendingMilan Broz1-11/+25
Move error code setting outside of crypt_dec_pending function. Use -EIO if crypt_convert_scatterlist() fails. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: remove unnecessary crypt_context write parmMilan Broz1-6/+4
Remove write attribute from convert_context and use bio flag instead. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm crypt: move convert_context inside dm_crypt_ioMilan Broz1-20/+21
Move convert_context inside dm_crypt_io. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm mpath: add missing staticAlasdair G Kergon1-1/+1
A static declaration missing. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm: targets no longer experimentalAlasdair G Kergon1-12/+12
Drop the EXPERIMENTAL tag from well-established device-mapper targets, so the newer ones stand out better. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm: refactor dm_suspend completion waitMilan Broz1-16/+27
Move completion wait to separate function Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08dm: split dm_suspend io_lock hold into twoMilan Broz1-1/+2
Change io_locking to allow processing flush in separate thread. Because we have DMF_BLOCK_IO already set, any possible new ios are queued in dm_requests now. In the case of interrupting previous wait there can be more ios queued (we unlocked io_lock for a while) but this is safe. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 15:59:31 +0000