summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-09-05pci-hotplug/pnv_php: Add a reset_slot() callbackOliver O'Halloran1-0/+39
When performing EEH recovery of devices in a hotplug slot we need to use the slot driver's ->reset_slot() callback to prevent spurious hotplug events due to spurious DLActive and PresDet change interrupts. Add a reset_slot() callback to pnv_php so we can handle recovery of devices in pnv_php managed slots. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190903101605.2890-9-oohall@gmail.com
2019-09-05powernv/eeh: Use generic code to handle hot resetsOliver O'Halloran1-3/+35
When we reset PCI devices managed by a hotplug driver the reset may generate spurious hotplug events that cause the PCI device we're resetting to be torn down accidently. This is a problem for EEH (when the driver is EEH aware) since we want to leave the OS PCI device state intact so that the device can be re-set without losing any resources (network, disks, etc) provided by the driver. Generic PCI code provides the pci_bus_error_reset() function to handle resetting a PCI Device (or bus) by using the reset method provided by the hotplug slot driver. We can use this function if the EEH core has requested a hot reset (common case) without tripping over the hotplug driver. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190903101605.2890-8-oohall@gmail.com
2019-09-05powerpc/eeh: Remove stale CAPI commentOliver O'Halloran1-7/+0
Support for switching CAPI cards into and out of CAPI mode was removed a while ago. Drop the comment since it's no longer relevant. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190903101605.2890-7-oohall@gmail.com
2019-09-05powerpc/eeh: Defer printing stack traceOliver O'Halloran4-26/+64
Currently we print a stack trace in the event handler to help with debugging EEH issues. In the case of suprise hot-unplug this is unneeded, so we want to prevent printing the stack trace unless we know it's due to an actual device error. To accomplish this, we can save a stack trace at the point of detection and only print it once the EEH recovery handler has determined the freeze was due to an actual error. Since the whole point of this is to prevent spurious EEH output we also move a few prints out of the detection thread, or mark them as pr_debug so anyone interested can get output from the eeh_check_dev_failure() if they want. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190903101605.2890-6-oohall@gmail.com
2019-09-05powerpc/eeh: Check slot presence state in eeh_handle_normal_event()Oliver O'Halloran1-0/+60
When a device is surprise removed while undergoing IO we will probably get an EEH PE freeze due to MMIO timeouts and other errors. When a freeze is detected we send a recovery event to the EEH worker thread which will notify drivers, and perform recovery as needed. In the event of a hot-remove we don't want recovery to occur since there isn't a device to recover. The recovery process is fairly long due to the number of wait states (required by PCIe) which causes problems when devices are removed and replaced (e.g. hot swapping of U.2 NVMe drives). To determine if we need to skip the recovery process we can use the get_adapter_state() operation of the hotplug_slot to determine if the slot contains a device or not, and if the slot is empty we can skip recovery entirely. One thing to note is that the slot being EEH frozen does not prevent the hotplug driver from working. We don't have the EEH recovery thread remove any of the devices since it's assumed that the hotplug driver will handle tearing down the slot state. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190903101605.2890-5-oohall@gmail.com
2019-09-05powerpc/eeh: Make permanently failed devices non-actionableOliver O'Halloran1-2/+10
If a device is torn down by a hotplug slot driver it's marked as removed and marked as permaantly failed. There's no point in trying to recover a permernantly failed device so it should be considered un-actionable. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190903101605.2890-4-oohall@gmail.com
2019-09-05powerpc/eeh: Fix race when freeing PDNsOliver O'Halloran3-2/+27
When hot-adding devices we rely on the hotplug driver to create pci_dn's for the devices under the hotplug slot. Converse, when hot-removing the driver will remove the pci_dn's that it created. This is a problem because the pci_dev is still live until it's refcount drops to zero. This can happen if the driver is slow to tear down it's internal state. Ideally, the driver would not attempt to perform any config accesses to the device once it's been marked as removed, but sometimes it happens. As a result, we might attempt to access the pci_dn for a device that has been torn down and the kernel may crash as a result. To fix this, don't free the pci_dn unless the corresponding pci_dev has been released. If the pci_dev is still live, then we mark the pci_dn with a flag that indicates the pci_dev's release function should free it. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190903101605.2890-3-oohall@gmail.com
2019-09-05powerpc/eeh: Clean up EEH PEs after recovery finishesOliver O'Halloran3-3/+64
When the last device in an eeh_pe is removed the eeh_pe structure itself (and any empty parents) are freed since they are no longer needed. This results in a crash when a hotplug driver is involved since the following may occur: 1. Device is suprise removed. 2. Driver performs an MMIO, which fails and queues and eeh_event. 3. Hotplug driver receives a hotplug interrupt and removes any pci_devs that were under the slot. 4. pci_dev is torn down and the eeh_pe is freed. 5. The EEH event handler thread processes the eeh_event and crashes since the eeh_pe pointer in the eeh_event structure is no longer valid. Crashing is generally considered poor form. Instead of doing that use the fact PEs are marked as EEH_PE_INVALID to keep them around until the end of the recovery cycle, at which point we can safely prune any empty PEs. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190903101605.2890-2-oohall@gmail.com
2019-08-30powerpc/64s/exception: reduce page fault unnecessary loadsNicholas Piggin2-23/+19
This avoids 3 loads in the radix page fault case, 1 load in the hash fault case, and 2 loads in the hash miss page fault case. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-37-npiggin@gmail.com
2019-08-30powerpc/64s/exception: Remove pointless KVM handler name bifurcationNicholas Piggin1-58/+44
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-36-npiggin@gmail.com
2019-08-30powerpc/64s/exception: program check handler do not branch into a macroNicholas Piggin1-7/+8
It is clever, but the small code saving is not worth the spaghetti of jumping to a label in an expanded macro, particularly when the label is just a number rather than a descriptive name. So expand the INT_COMMON macro twice, once for the stack and no stack cases, and branch to those. The slight code size increase is worth the improved clarity of branches for this non-performance critical code. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-35-npiggin@gmail.com
2019-08-30powerpc/64s/exception: move interrupt entry code above the common handlerNicholas Piggin1-225/+225
This better reflects the order in which the code is executed. No generated code change except BUG line number constants. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-34-npiggin@gmail.com
2019-08-30powerpc/64s/exception: INT_COMMON add DAR, DSISR, reconcile optionsNicholas Piggin1-60/+51
Move DAR and DSISR saving to pt_regs into INT_COMMON. Also add an option to expand RECONCILE_IRQ_STATE. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-33-npiggin@gmail.com
2019-08-30powerpc/64s/exception: Expand EXCEPTION_PROLOG_COMMON_1 and 2 into callerNicholas Piggin1-45/+40
No generated code change except BUG line number constants. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-32-npiggin@gmail.com
2019-08-30powerpc/64s/exception: Expand EXCEPTION_COMMON macro into callerNicholas Piggin1-27/+27
No generated code change except BUG line number constants. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-31-npiggin@gmail.com
2019-08-30powerpc/64s/exception: Add INT_COMMON gas macro to generate common exception ↵Nicholas Piggin1-20/+32
code No generated code change except BUG line number constants. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-30-npiggin@gmail.com
2019-08-30powerpc/64s/exception: Merge EXCEPTION_PROLOG_COMMON_2/3Nicholas Piggin1-12/+6
Merge EXCEPTION_PROLOG_COMMON_3 into EXCEPTION_PROLOG_COMMON_2. No generated code change except BUG line number constants. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-29-npiggin@gmail.com
2019-08-30powerpc/64s/exception: KVM_HANDLER reorder arguments to match other macrosNicholas Piggin1-8/+8
Also change argument name (n -> vec) to match others. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-28-npiggin@gmail.com
2019-08-30powerpc/64s/exception: Add INT_KVM_HANDLER gas macroNicholas Piggin1-59/+40
Replace the 4 variants of cpp macros with one gas macro. No generated code change except BUG line number constants. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-27-npiggin@gmail.com
2019-08-30powerpc/64s/exception: INT_HANDLER support HDAR/HDSISR and use it in HDSINicholas Piggin1-6/+10
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-26-npiggin@gmail.com
2019-08-30powerpc/64s/exception: Add the virt variant of the denorm interrupt handlerNicholas Piggin1-1/+5
All other virt handlers have the prolog code in the virt vector rather than branch to the real vector. Follow this pattern in the denorm virt handler. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-25-npiggin@gmail.com
2019-08-30powerpc/64s/exception: remove EXCEPTION_PROLOG_0/1, rename _2Nicholas Piggin1-78/+73
EXCEPTION_PROLOG_0 and _1 have only a single caller, so expand them into it. Rename EXCEPTION_PROLOG_2_REAL to INT_SAVE_SRR_AND_JUMP and EXCEPTION_PROLOG_2_VIRT to INT_VIRT_SAVE_SRR_AND_JUMP, which are more descriptive. No generated code change except BUG line number constants. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-24-npiggin@gmail.com
2019-08-30powerpc/64s/exceptions: Use keyword params to shorten arg listsMichael Ellerman1-60/+60
The argument lists for the INT_HANDLER macro are getting a bit unwieldy. Use keyword parameters with default values to shorten them. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190830011426.16810-1-mpe@ellerman.id.au
2019-08-30powerpc/64s/exception: Replace PROLOG macros and EXC helpers with a gas macroNicholas Piggin1-296/+206
This creates a single macro that generates the exception prolog code, with variants specified by arguments, rather than assorted nested macros for different variants. The increasing length of macro argument list is not nice to read or modify, but this is a temporary condition that will be improved in later changes. No generated code change except BUG line number constants and label names. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-23-npiggin@gmail.com
2019-08-30powerpc/64s/exception: remove 0xb00 handlerNicholas Piggin1-4/+2
This vector is not used by any supported processor, and has been implemented as an unknown exception going back to 2.6. There is nothing special about 0xb00, so remove it like other unused vectors. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-22-npiggin@gmail.com
2019-08-30powerpc/64s/exception: Fix performance monitor virt handlerNicholas Piggin1-1/+1
The perf virt handler uses EXCEPTION_PROLOG_2_REAL rather than _VIRT. In practice this is okay because the _REAL variant is usable by virt mode interrupts, but should be fixed (and is a performance win). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-21-npiggin@gmail.com
2019-08-30powerpc/64s/exception: Add EXC_HV_OR_STD, which selects HSRR if HVMODENicholas Piggin1-23/+79
Add EXC_HV_OR_STD and use it to consolidate the 0x500 external interrupt. Executed code is unchanged. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-20-npiggin@gmail.com
2019-08-30powerpc/64s/exception: move head-64.h exception code to exception-64s.SNicholas Piggin2-41/+41
The head-64.h code should deal only with the head code sections and offset calculations. No generated code change except BUG line number constants. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-19-npiggin@gmail.com
2019-08-30powerpc/64s/exception: Fix DAR load for handle_page_fault error caseNicholas Piggin1-1/+1
This buglet goes back to before the 64/32 arch merge, but it does not seem to have had practical consequences because bad_page_fault does not use the 2nd argument, but rather regs->dar/nip. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-18-npiggin@gmail.com
2019-08-30powerpc/64s/exception: machine check improve labels and commentsNicholas Piggin1-4/+10
Short forward and backward branches can be given number labels, but larger significant divergences in code path a more readable if they're given descriptive names. Also adjusts a comment to account for guest delivery. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-17-npiggin@gmail.com
2019-08-30powerpc/64s/exception: untangle early machine check handler branchNicholas Piggin1-67/+62
machine_check_early_common now branches to machine_check_handle_early which is its only caller. Move interleaving code out of the way, and remove the branch. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-16-npiggin@gmail.com
2019-08-30powerpc/64s/exception: machine check move unrecoverable handling out of lineNicholas Piggin1-43/+44
Similarly to the previous change, all callers of the unrecoverable handler run relocated so can reach it with a direct branch. This makes it easy to move out of line, which makes the "normal" path less cluttered and easier to follow. MSR[ME] manipulation still requires the rfi, so that is moved out of line to its own function. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-15-npiggin@gmail.com
2019-08-30powerpc/64s/exception: simplify machine check early pathNicholas Piggin1-9/+22
machine_check_handle_early_common can reach machine_check_handle_early directly now that it runs at the relocated address, so just branch directly. The rfi sequence is required to enable MSR[ME] but that step is moved into a helper function, making the code easier to follow. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-14-npiggin@gmail.com
2019-08-30powerpc/64s/exception: machine check move tramp codeNicholas Piggin1-11/+11
Following convention, move the tramp code (unrelocated) above the common handlers (relocated). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-13-npiggin@gmail.com
2019-08-30powerpc/64s/exception: machine check restructure to reuse common macrosNicholas Piggin1-35/+36
Follow the pattern of sreset and HMI handlers more closely: use EXCEPTION_PROLOG_COMMON_1 rather than open-coding it, and run the handler at the relocated location. This helps later simplification and code sharing. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-12-npiggin@gmail.com
2019-08-30powerpc/64s/exception: machine check pseries should skip the late handler ↵Nicholas Piggin1-20/+2
for kernel MCEs The powernv machine check handler copes with taking a MCE from one of three contexts, guest, kernel, and user. In each case the early handler runs first on a special stack, then: - The guest case branches to the KVM interrupt handler (via standard interrupt macros). - The user case will run the "late" handler which is like a normal interrupt that runs in virtual mode and uses the regular kernel stack. - The kernel case queues the event and schedules it for processing with irq work. The last case is important, it must not enable virtual memory because the MMU state may not be set up to deal with that (e.g., SLB might be clear), it must not use the regular kernel stack for similar reasons (e.g., might be in OPAL with OPAL stack in r1), and the kernel does not expect anything to touch its stack if interrupts are disabled. The pseries handler does not do this queueing, but instead it always runs the late handler for host MCEs, which has some of the same problems. Now that pseries is using machine_check_events, change it to do the same as powernv and queue events for kernel MCEs. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-11-npiggin@gmail.com
2019-08-30powerpc/64s/pseries: machine check convert to use common event codeNicholas Piggin3-267/+233
The common machine_check_event data structures and queues are mostly platform independent, with powernv decoding SRR1/DSISR/etc., into machine_check_event objects. This patch converts pseries to use this infrastructure by decoding fwnmi/rtas data into machine_check_event objects. This allows queueing to be used by a subsequent change to delay the virtual mode handling of machine checks that occur in kernel space where it is unsafe to switch immediately to virtual mode, similarly to powernv. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Fix implicit fallthrough warnings in mce_handle_error()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-10-npiggin@gmail.com
2019-08-30powerpc/64s/powernv: machine check dump SLB contentsNicholas Piggin4-11/+32
Re-use the code introduced in pseries to save and dump the contents of the SLB in the case of an SLB involved machine check exception. This patch also avoids allocating the SLB save array on pseries radix. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-9-npiggin@gmail.com
2019-08-30powerpc/64s/exception: machine check use correct cfar for late handlerNicholas Piggin1-0/+4
Bare metal machine checks run an "early" handler in real mode before running the main handler which reports the event. The main handler runs exactly as a normal interrupt handler, after the "windup" which sets registers back as they were at interrupt entry. CFAR does not get restored by the windup code, so that will be wrong when the handler is run. Restore the CFAR to the saved value before running the late handler. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-8-npiggin@gmail.com
2019-08-30powerpc/64s/exception: machine check remove machine_check_pSeries_0 branchNicholas Piggin1-13/+10
This label has only one caller, so unwind the branch and move it inline. The location of the comment is adjusted to match similar one in system reset. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-7-npiggin@gmail.com
2019-08-30powerpc/64s/exception: machine check pseries should always run the early handlerNicholas Piggin1-4/+0
Now that pseries with fwnmi registered runs the early machine check handler, there is no good reason to special case the non-fwnmi case and skip the early handler. Reducing the code and number of paths is a top priority for asm code, it's better to handle this in C where possible (and the pseries early handler is a no-op if fwnmi is not registered). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-6-npiggin@gmail.com
2019-08-30powerpc/64s/exception: machine check adjust RFI targetNicholas Piggin1-1/+1
The host kernel delivery case for powernv does RFI_TO_USER_OR_KERNEL, but should just use RFI_TO_KERNEL which makes it clear this is not a user case. This is not a bug because RFI_TO_USER_OR_KERNEL deals with kernel returns just fine. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-5-npiggin@gmail.com
2019-08-30powerpc/64s/exception: machine check fix KVM guest testNicholas Piggin1-20/+13
The machine_check_handle_early hypervisor guest test is skipped if !HVMODE or MSR[HV]=0, which is wrong for PR or nested hypervisors that could be running a guest in this state. Test HSTATE_IN_GUEST up front and use that to branch out to the KVM handler, then MSR[PR] alone can test for this kernel's userspace. This matches all other interrupt handling. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-4-npiggin@gmail.com
2019-08-30powerpc/64s/exception: machine check remove bitrotted commentNicholas Piggin1-4/+0
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-3-npiggin@gmail.com
2019-08-30powerpc/64s/exception: machine check fwnmi remove HV caseNicholas Piggin1-2/+1
fwnmi does not trigger in HV mode, so remove always-true feature test. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190802105709.27696-2-npiggin@gmail.com
2019-08-30powerpc/configs: Enable secure guest support in pseries and ppc64 defconfigsRyan Grimm2-0/+2
Enables running as a secure guest in platforms with an Ultravisor. Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com> Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190820021326.6884-17-bauerman@linux.ibm.com
2019-08-30powerpc/pseries/svm: Force SWIOTLB for secure guestsAnshuman Khandual3-0/+74
SWIOTLB checks range of incoming CPU addresses to be bounced and sees if the device can access it through its DMA window without requiring bouncing. In such cases it just chooses to skip bouncing. But for cases like secure guests on powerpc platform all addresses need to be bounced into the shared pool of memory because the host cannot access it otherwise. Hence the need to do the bouncing is not related to device's DMA window and use of bounce buffers is forced by setting swiotlb_force. Also, connect the shared memory conversion functions into the ARCH_HAS_MEM_ENCRYPT hooks and call swiotlb_update_mem_attributes() to convert SWIOTLB's memory pool to shared memory. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [ bauerman: Use ARCH_HAS_MEM_ENCRYPT hooks to share swiotlb memory pool. ] Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190820021326.6884-15-bauerman@linux.ibm.com
2019-08-30powerpc/pseries/iommu: Don't use dma_iommu_ops on secure guestsThiago Jung Bauermann1-1/+10
Secure guest memory is inacessible to devices so regular DMA isn't possible. In that case set devices' dma_map_ops to NULL so that the generic DMA code path will use SWIOTLB to bounce buffers for DMA. Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190820021326.6884-14-bauerman@linux.ibm.com
2019-08-30powerpc/pseries/svm: Disable doorbells in SVM guestsSukadev Bhattiprolu1-1/+2
Normally, the HV emulates some instructions like MSGSNDP, MSGCLRP from a KVM guest. To emulate the instructions, it must first read the instruction from the guest's memory and decode its parameters. However for a secure guest (aka SVM), the page containing the instruction is in secure memory and the HV cannot access directly. It would need the Ultravisor (UV) to facilitate accessing the instruction and parameters but the UV currently does not have the support for such accesses. Until the UV has such support, disable doorbells in SVMs. This might incur a performance hit but that is yet to be quantified. With this patch applied (needed only in SVMs not needed for HV) we are able to launch SVM guests with multi-core support. Eg: qemu -smp sockets=2,cores=2,threads=2. Fix suggested by Benjamin Herrenschmidt. Thanks to input from Paul Mackerras, Ram Pai and Michael Anderson. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190820021326.6884-13-bauerman@linux.ibm.com
2019-08-30powerpc/pseries/svm: Export guest SVM status to user space via sysfsRyan Grimm2-0/+30
User space might want to know it's running in a secure VM. It can't do a mfmsr because mfmsr is a privileged instruction. The solution here is to create a cpu attribute: /sys/devices/system/cpu/svm which will read 0 or 1 based on the S bit of the current CPU. Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190820021326.6884-12-bauerman@linux.ibm.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 14:48:06 +0000