summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-08-10Merge branch 'linus' into timers/urgent, to pick up fixesIngo Molnar4843-138342/+205105
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10x86/timers/apic: Inform TSC deadline clockevent device about recalibrationNicolai Stange3-0/+30
This patch eliminates a source of imprecise APIC timer interrupts, which imprecision may result in double interrupts or even late interrupts. The TSC deadline clockevent devices' configuration and registration happens before the TSC frequency calibration is refined in tsc_refine_calibration_work(). This results in the TSC clocksource and the TSC deadline clockevent devices being configured with slightly different frequencies: the former gets the refined one and the latter are configured with the inaccurate frequency detected earlier by means of the "Fast TSC calibration using PIT". Within the APIC code, introduce the notifier function lapic_update_tsc_freq() which reconfigures all per-CPU TSC deadline clockevent devices with the current tsc_khz. Call it from the TSC code after TSC calibration refinement has happened. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Christopher S. Hall <christopher.s.hall@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: http://lkml.kernel.org/r/20160714152255.18295-3-nicstange@gmail.com [ Pushed #ifdef CONFIG_X86_LOCAL_APIC into header, improved changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10x86/timers/apic: Fix imprecise timer interrupts by eliminating TSC ↵Nicolai Stange1-2/+2
clockevents frequency roundoff error I noticed the following bug/misbehavior on certain Intel systems: with a single task running on a NOHZ CPU on an Intel Haswell, I recognized that I did not only get the one expected local_timer APIC interrupt, but two per second at minimum. (!) Further tracing showed that the first one precedes the programmed deadline by up to ~50us and hence, it did nothing except for reprogramming the TSC deadline clockevent device to trigger shortly thereafter again. The reason for this is imprecise calibration, the timeout we program into the APIC results in 'too short' timer interrupts. The core (hr)timer code notices this (because it has a precise ktime source and sees the short interrupt) and fixes it up by programming an additional very short interrupt period. This is obviously suboptimal. The reason for the imprecise calibration is twofold, and this patch fixes the first reason: In setup_APIC_timer(), the registered clockevent device's frequency is calculated by first dividing tsc_khz by TSC_DIVISOR and multiplying it with 1000 afterwards: (tsc_khz / TSC_DIVISOR) * 1000 The multiplication with 1000 is done for converting from kHz to Hz and the division by TSC_DIVISOR is carried out in order to make sure that the final result fits into an u32. However, with the order given in this calculation, the roundoff error introduced by the division gets magnified by a factor of 1000 by the following multiplication. To fix it, reversing the order of the division and the multiplication a la: (tsc_khz * 1000) / TSC_DIVISOR ... reduces the roundoff error already. Furthermore, if TSC_DIVISOR divides 1000, associativity holds: (tsc_khz * 1000) / TSC_DIVISOR = tsc_khz * (1000 / TSC_DIVISOR) and thus, the roundoff error even vanishes and the whole operation can be carried out within 32 bits. The powers of two that divide 1000 are 2, 4 and 8. A value of 8 for TSC_DIVISOR still allows for TSC frequencies up to 2^32 / 10^9ns * 8 = 34.4GHz which is way larger than anything to expect in the next years. Thus we also replace the current TSC_DIVISOR value of 32 by 8. Reverse the order of the divison and the multiplication in the calculation of the registered clockevent device's frequency. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Christopher S. Hall <christopher.s.hall@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: http://lkml.kernel.org/r/20160714152255.18295-2-nicstange@gmail.com [ Improved changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-09Revert "printk: create pr_<level> functions"Linus Torvalds4-76/+26
This reverts commit 874f9c7da9a4acbc1b9e12ca722579fb50e4d142. Geert Uytterhoeven reports: "This change seems to have an (unintendent?) side-effect. Before, pr_*() calls without a trailing newline characters would be printed with a newline character appended, both on the console and in the output of the dmesg command. After this commit, no new line character is appended, and the output of the next pr_*() call of the same type may be appended, like in: - Truncating RAM at 0x0000000040000000-0x00000000c0000000 to -0x0000000070000000 - Ignoring RAM at 0x0000000200000000-0x0000000240000000 (!CONFIG_HIGHMEM) + Truncating RAM at 0x0000000040000000-0x00000000c0000000 to -0x0000000070000000Ignoring RAM at 0x0000000200000000-0x0000000240000000 (!CONFIG_HIGHMEM)" Joe Perches says: "No, that is not intentional. The newline handling code inside vprintk_emit is a bit involved and for now I suggest a revert until this has all the same behavior as earlier" Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Requested-by: Joe Perches <joe@perches.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-09Merge tag 'trace-v4.8-2' of ↵Linus Torvalds1-3/+11
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Fix tick_stop tracepoint symbols for user export. Luiz Capitulino noticed that the tick_stop tracepoint wasn't being parsed properly by the tracing user space tools. This was due to the TRACE_DEFINE_ENUM() being set to a define, when it should have been set to the enum itself. The define was of the MASK that used the BIT to shift. The BIT was the enum and by adding that, everything gets converted nicely. The MASK is still kept just in case it gets converted to an enum in the future" * tag 'trace-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix tick_stop tracepoint symbols for user export
2016-08-09Merge tag 'gcc-plugin-infrastructure-v4.8-rc2' of ↵Linus Torvalds5-26/+56
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull gcc plugin improvements from Kees Cook: "Several fixes/improvements for the gcc plugin infrastructure: - fix a problem with gcc plugins interfering with cc-option tests. - abort more gracefully when gcc plugin headers or compiler support is missing. - improve the gcc plugin rule generation to be more dynamic, pass arguments, and build from subdirectories" * tag 'gcc-plugin-infrastructure-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: Add support for plugin subdirectories gcc-plugins: Automate make rule generation gcc-plugins: Add support for passing plugin arguments gcc-plugins: abort builds cleanly when not supported kbuild: no gcc-plugins during cc-option tests
2016-08-09Merge tag 'platform-drivers-x86-v4.8-3' of ↵Linus Torvalds1-2/+2
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver update from Darren Hart: "dell-wmi: ignore battery remove/insert event" * tag 'platform-drivers-x86-v4.8-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: dell-wmi: Ignore WMI event 0xe00e
2016-08-09Merge tag 'drm-fixes-for-4.8-rc2' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds18-64/+95
Pull drm fixes from Dave Airlie: "This contains a bunch of amdgpu fixes, and some i915 regression fixes. It also contains some fixes for an older regression with some EDID changes and some 6bpc panels. Then there are the lockdep, cirrus and rcar-du regression fixes from this window" * tag 'drm-fixes-for-4.8-rc2' of git://people.freedesktop.org/~airlied/linux: drm/cirrus: Fix NULL pointer dereference when registering the fbdev drm/edid: Set 8 bpc color depth for displays with "DFP 1.x compliant TMDS". drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown" drm/edid: Add 6 bpc quirk for display AEO model 0. drm: Paper over locking inversion after registration rework drm: rcar-du: Link HDMI encoder with bridge drm/ttm: Wait for a BO to become idle before unbinding it from GTT drm/i915/fbdev: Check for the framebuffer before use drm/amdgpu: update golden setting of polaris10 drm/amdgpu: update golden setting of stoney drm/amdgpu: update golden setting of polaris11 drm/amdgpu: update golden setting of carrizo drm/amdgpu: update golden setting of iceland drm/amd/amdgpu: change pptable output format from ASCII to binary drm/amdgpu/ci: add mullins to default case for smc ucode drm/amdgpu/gmc7: add missing mullins case drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVB drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL
2016-08-09ipr: Fix sync scsi scanBrian King1-5/+6
Commit b195d5e2bffd ("ipr: Wait to do async scan until scsi host is initialized") fixed async scan for ipr, but broke sync scan for ipr. This fixes sync scan back up. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reported-and-tested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-09mm: memcontrol: only mark charged pages with PageKmemcgVladimir Davydov3-14/+18
To distinguish non-slab pages charged to kmemcg we mark them PageKmemcg, which sets page->_mapcount to -512. Currently, we set/clear PageKmemcg in __alloc_pages_nodemask()/free_pages_prepare() for any page allocated with __GFP_ACCOUNT, including those that aren't actually charged to any cgroup, i.e. allocated from the root cgroup context. To avoid overhead in case cgroups are not used, we only do that if memcg_kmem_enabled() is true. The latter is set iff there are kmem-enabled memory cgroups (online or offline). The root cgroup is not considered kmem-enabled. As a result, if a page is allocated with __GFP_ACCOUNT for the root cgroup when there are kmem-enabled memory cgroups and is freed after all kmem-enabled memory cgroups were removed, e.g. # no memory cgroups has been created yet, create one mkdir /sys/fs/cgroup/memory/test # run something allocating pages with __GFP_ACCOUNT, e.g. # a program using pipe dmesg | tail # remove the memory cgroup rmdir /sys/fs/cgroup/memory/test we'll get bad page state bug complaining about page->_mapcount != -1: BUG: Bad page state in process swapper/0 pfn:1fd945c page:ffffea007f651700 count:0 mapcount:-511 mapping: (null) index:0x0 flags: 0x1000000000000000() To avoid that, let's mark with PageKmemcg only those pages that are actually charged to and hence pin a non-root memory cgroup. Fixes: 4949148ad433 ("mm: charge/uncharge kmemcg from generic page allocator paths") Reported-and-tested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-09tracing: Fix tick_stop tracepoint symbols for user exportSteven Rostedt (Red Hat)1-3/+11
The symbols used in the tick_stop tracepoint were not being converted properly into integers in the trace_stop format file. Instead we had this: print fmt: "success=%d dependency=%s", REC->success, __print_symbolic(REC->dependency, { 0, "NONE" }, { (1 << TICK_DEP_BIT_POSIX_TIMER), "POSIX_TIMER" }, { (1 << TICK_DEP_BIT_PERF_EVENTS), "PERF_EVENTS" }, { (1 << TICK_DEP_BIT_SCHED), "SCHED" }, { (1 << TICK_DEP_BIT_CLOCK_UNSTABLE), "CLOCK_UNSTABLE" }) User space tools have no idea how to parse "TICK_DEP_BIT_SCHED" or the other symbols used to do the bit shifting. The reason is that the conversion was done with using the TICK_DEP_MASK_* symbols which are just macros that convert to the BIT shift itself (with the exception of NONE, which was converted properly, because it doesn't use bits, and is defined as zero). The TICK_DEP_BIT_* needs to be denoted by TRACE_DEFINE_ENUM() in order to have this properly converted for user space tools to parse this event. Cc: stable@vger.kernel.org Cc: Frederic Weisbecker <fweisbec@gmail.com> Fixes: e6e6cc22e067 ("nohz: Use enum code for tick stop failure tracing message") Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Tested-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-08-09timers: Fix get_next_timer_interrupt() computationChris Metcalf1-1/+4
The tick_nohz_stop_sched_tick() routine is not properly canceling the sched timer when nothing is pending, because get_next_timer_interrupt() is no longer returning KTIME_MAX in that case. This causes periodic interrupts when none are needed. When determining the next interrupt time, we first use __next_timer_interrupt() to get the first expiring timer in the timer wheel. If no timer is found, we return the base clock value plus NEXT_TIMER_MAX_DELTA to indicate there is no timer in the timer wheel. Back in get_next_timer_interrupt(), we set the "expires" value by converting the timer wheel expiry (in ticks) to a nsec value. But we don't want to do this if the timer wheel expiry value indicates no timer; we want to return KTIME_MAX. Prior to commit 500462a9de65 ("timers: Switch to a non-cascading wheel") we checked base->active_timers to see if any timers were active, and if not, we didn't touch the expiry value and so properly returned KTIME_MAX. Now we don't have active_timers. To fix this, we now just check the timer wheel expiry value to see if it is "now + NEXT_TIMER_MAX_DELTA", and if it is, we don't try to compute a new value based on it, but instead simply let the KTIME_MAX value in expires remain. Fixes: 500462a9de65 "timers: Switch to a non-cascading wheel" Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/1470688147-22287-1-git-send-email-cmetcalf@mellanox.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-09drm/cirrus: Fix NULL pointer dereference when registering the fbdevBoris Brezillon1-2/+11
cirrus_modeset_init() is initializing/registering the emulated fbdev and, since commit c61b93fe51b1 ("drm/atomic: Fix remaining places where !funcs->best_encoder is valid"), DRM internals can access/test some of the fields in mode_config->funcs as part of the fbdev registration process. Make sure dev->mode_config.funcs is properly set to avoid dereferencing a NULL pointer. Reported-by: Mike Marshall <hubcap@omnibond.com> Reported-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: c61b93fe51b1 ("drm/atomic: Fix remaining places where !funcs->best_encoder is valid") Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-08gcc-plugins: Add support for plugin subdirectoriesEmese Revfy2-4/+8
This adds support for building more complex gcc plugins that live in a subdirectory instead of just in a single source file. Reported-by: PaX Team <pageexec@freemail.hu> Signed-off-by: Emese Revfy <re.emese@gmail.com> [kees: clarified commit message] Signed-off-by: Kees Cook <keescook@chromium.org>
2016-08-08gcc-plugins: Automate make rule generationEmese Revfy1-2/+1
There's no reason to repeat the same names in the Makefile when the .so files have already been listed. The .o list can be generated from them. Reported-by: PaX Team <pageexec@freemail.hu> Signed-off-by: Emese Revfy <re.emese@gmail.com> [kees: clarified commit message] Signed-off-by: Kees Cook <keescook@chromium.org>
2016-08-08gcc-plugins: Add support for passing plugin argumentsEmese Revfy1-1/+1
The latent_entropy plugin needs to pass arguments, so this adds the support. Signed-off-by: Emese Revfy <re.emese@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-08-08gcc-plugins: abort builds cleanly when not supportedKees Cook3-16/+39
When the compiler doesn't support gcc plugins (either due to missing headers or too old a version), report the problem and abort the build instead of emitting a warning and letting the build founder with arcane compiler errors. Signed-off-by: Kees Cook <keescook@chromium.org>
2016-08-08kbuild: no gcc-plugins during cc-option testsEmese Revfy1-3/+7
The gcc-plugins arguments should not be included when performing cc-option tests. Steps to reproduce: 1) make mrproper 2) make defconfig 3) enable GCC_PLUGINS, GCC_PLUGIN_CYC_COMPLEXITY 4) enable FUNCTION_TRACER (it will select other options as well) 5) make && make modules Build errors: MODPOST 18 modules ERROR: "__fentry__" [net/netfilter/xt_nat.ko] undefined! ERROR: "__fentry__" [net/netfilter/xt_mark.ko] undefined! ERROR: "__fentry__" [net/netfilter/xt_addrtype.ko] undefined! ERROR: "__fentry__" [net/netfilter/xt_LOG.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat_sip.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat_irc.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat_ftp.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat.ko] undefined! Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Emese Revfy <re.emese@gmail.com> [kees: renamed variable, clarified commit message] Signed-off-by: Kees Cook <keescook@chromium.org>
2016-08-09drm/edid: Set 8 bpc color depth for displays with "DFP 1.x compliant TMDS".Mario Kleiner1-0/+14
According to E-EDID spec 1.3, table 3.9, a digital video sink with the "DFP 1.x compliant TMDS" bit set is "signal compatible with VESA DFP 1.x TMDS CRGB, 1 pixel / clock, up to 8 bits / color MSB aligned". For such displays, the DFP spec 1.0, section 3.10 "EDID support" says: "If the DFP monitor only supports EDID 1.X (1.1, 1.2, etc.) without extensions, the host will make the following assumptions: 1. 24-bit MSB-aligned RGB TFT 2. DE polarity is active high 3. H and V syncs are active high 4. Established CRT timings will be used 5. Dithering will not be enabled on the host" So if we don't know the bit depth of the display from additional colorimetry info we should assume 8 bpc / 24 bpp by default. This patch adds info->bpc = 8 assignement for that case. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-09drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability ↵Mario Kleiner1-15/+5
is unknown" This reverts commit 013dd9e03872 ("drm/i915/dp: fall back to 18 bpp when sink capability is unknown") This commit introduced a regression into stable kernels, as it reduces output color depth to 6 bpc for any video sink connected to a Displayport connector if that sink doesn't report a specific color depth via EDID, or if our EDID parser doesn't actually recognize the proper bpc from EDID. Affected are active DisplayPort->VGA converters and active DisplayPort->DVI converters. Both should be able to handle 8 bpc, but are degraded to 6 bpc with this patch. The reverted commit was meant to fix Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331 A followup patch implements a fix for that specific bug, which is caused by a faulty EDID of the affected DP panel by adding a new EDID quirk for that panel. DP 18 bpp fallback handling and other improvements to DP sink bpc detection will be handled for future kernels in a separate series of patches. Please backport to stable. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-09drm/edid: Add 6 bpc quirk for display AEO model 0.Mario Kleiner1-0/+8
Bugzilla https://bugzilla.kernel.org/show_bug.cgi?id=105331 reports that the "AEO model 0" display is driven with 8 bpc without dithering by default, which looks bad because that panel is apparently a 6 bpc DP panel with faulty EDID. A fix for this was made by commit 013dd9e03872 ("drm/i915/dp: fall back to 18 bpp when sink capability is unknown"). That commit triggers new regressions in precision for DP->DVI and DP->VGA displays. A patch is out to revert that commit, but it will revert video output for the AEO model 0 panel to 8 bpc without dithering. The EDID 1.3 of that panel, as decoded from the xrandr output attached to that bugzilla bug report, is somewhat faulty, and beyond other problems also sets the "DFP 1.x compliant TMDS" bit, which according to DFP spec means to drive the panel with 8 bpc and no dithering in absence of other colorimetry information. Try to make the original bug reporter happy despite the faulty EDID by adding a quirk to mark that panel as 6 bpc, so 6 bpc output with dithering creates a nice picture. Tested by injecting the edid from the fdo bug into a DP connector via drm_kms_helper.edid_firmware and verifying the 6 bpc + dithering is selected. This patch should be backported to stable. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: stable@vger.kernel.org Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-08Merge tag 'lkdtm-v4.8-rc1' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull lkdtm update from Kees Cook: "Fix rebuild problem with LKDTM's rodata test" [ This, and the usercopy branch, both came in before the merge window closed, but ended up in my 'need to look more' queue and thus got merged only after rc1 was out ] * tag 'lkdtm-v4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lkdtm: Fix targets for objcopy usage lkdtm: fix false positive warning from -Wmaybe-uninitialized
2016-08-08Merge tag 'usercopy-v4.8' of ↵Linus Torvalds28-22/+555
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull usercopy protection from Kees Cook: "Tbhis implements HARDENED_USERCOPY verification of copy_to_user and copy_from_user bounds checking for most architectures on SLAB and SLUB" * tag 'usercopy-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: mm: SLUB hardened usercopy support mm: SLAB hardened usercopy support s390/uaccess: Enable hardened usercopy sparc/uaccess: Enable hardened usercopy powerpc/uaccess: Enable hardened usercopy ia64/uaccess: Enable hardened usercopy arm64/uaccess: Enable hardened usercopy ARM: uaccess: Enable hardened usercopy x86/uaccess: Enable hardened usercopy mm: Hardened usercopy mm: Implement stack frame object validation mm: Add is_migrate_cma_page
2016-08-08unsafe_[get|put]_user: change interface to use a error target labelLinus Torvalds4-18/+17
When I initially added the unsafe_[get|put]_user() helpers in commit 5b24a7a2aa20 ("Add 'unsafe' user access functions for batched accesses"), I made the mistake of modeling the interface on our traditional __[get|put]_user() functions, which return zero on success, or -EFAULT on failure. That interface is fairly easy to use, but it's actually fairly nasty for good code generation, since it essentially forces the caller to check the error value for each access. In particular, since the error handling is already internally implemented with an exception handler, and we already use "asm goto" for various other things, we could fairly easily make the error cases just jump directly to an error label instead, and avoid the need for explicit checking after each operation. So switch the interface to pass in an error label, rather than checking the error value in the caller. Best do it now before we start growing more users (the signal handling code in particular would be a good place to use the new interface). So rather than if (unsafe_get_user(x, ptr)) ... handle error .. the interface is now unsafe_get_user(x, ptr, label); where an error during the user mode fetch will now just cause a jump to 'label' in the caller. Right now the actual _implementation_ of this all still ends up being a "if (err) goto label", and does not take advantage of any exception label tricks, but for "unsafe_put_user()" in particular it should be fairly straightforward to convert to using the exception table model. Note that "unsafe_get_user()" is much harder to convert to a clever exception table model, because current versions of gcc do not allow the use of "asm goto" (for the exception) with output values (for the actual value to be fetched). But that is hopefully not a limitation in the long term. [ Also note that it might be a good idea to switch unsafe_get_user() to actually _return_ the value it fetches from user space, but this commit only changes the error handling semantics ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-08printk: Remove unnecessary #ifdef CONFIG_PRINTKAndreas Ziegler1-2/+0
In commit 874f9c7da9a4 ("printk: create pr_<level> functions"), new pr_level defines were added to printk.c. These new defines are guarded by an #ifdef CONFIG_PRINTK - however, there is already a surrounding #ifdef CONFIG_PRINTK starting a lot earlier in line 249 which means the newly introduced #ifdef is unnecessary. Let's remove it to avoid confusion. Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de> Cc: Joe Perches <joe@perches.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-08dell-wmi: Ignore WMI event 0xe00ePali Rohár1-2/+2
WMI event 0xe00e is received when battery was removed or inserted. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-08-08x86/hweight: Don't clobber %rdiVille Syrjälä1-0/+2
The caller expects %rdi to remain intact, push+pop it make that happen. Fixes the following kind of explosions on my core2duo machine when trying to reboot or shut down: general protection fault: 0000 [#1] PREEMPT SMP Modules linked in: i915 i2c_algo_bit drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect sysimgblt fb_sys_fops cfbcopyarea drm netconsole configfs binfmt_misc iTCO_wdt psmouse pcspkr snd_hda_codec_idt e100 coretemp hwmon snd_hda_codec_generic i2c_i801 mii i2c_smbus lpc_ich mfd_core snd_hda_intel uhci_hcd snd_hda_codec snd_hwdep snd_hda_core ehci_pci 8250 ehci_hcd snd_pcm 8250_base usbcore evdev serial_core usb_common parport_pc parport snd_timer snd soundcore CPU: 0 PID: 3070 Comm: reboot Not tainted 4.8.0-rc1-perf-dirty #69 Hardware name: /D946GZIS, BIOS TS94610J.86A.0087.2007.1107.1049 11/07/2007 task: ffff88012a0b4080 task.stack: ffff880123850000 RIP: 0010:[<ffffffff81003c92>] [<ffffffff81003c92>] x86_perf_event_update+0x52/0xc0 RSP: 0018:ffff880123853b60 EFLAGS: 00010087 RAX: 0000000000000001 RBX: ffff88012fc0a3c0 RCX: 000000000000001e RDX: 0000000000000000 RSI: 0000000040000000 RDI: ffff88012b014800 RBP: ffff880123853b88 R08: ffffffffffffffff R09: 0000000000000000 R10: ffffea0004a012c0 R11: ffffea0004acedc0 R12: ffffffff80000001 R13: ffff88012b0149c0 R14: ffff88012b014800 R15: 0000000000000018 FS: 00007f8b155cd700(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8b155f5000 CR3: 000000012a2d7000 CR4: 00000000000006f0 Stack: ffff88012fc0a3c0 ffff88012b014800 0000000000000004 0000000000000001 ffff88012fc1b750 ffff880123853bb0 ffffffff81003d59 ffff88012b014800 ffff88012fc0a3c0 ffff88012b014800 ffff880123853bd8 ffffffff81003e13 Call Trace: [<ffffffff81003d59>] x86_pmu_stop+0x59/0xd0 [<ffffffff81003e13>] x86_pmu_del+0x43/0x140 [<ffffffff8111705d>] event_sched_out.isra.105+0xbd/0x260 [<ffffffff8111738d>] __perf_remove_from_context+0x2d/0xb0 [<ffffffff8111745d>] __perf_event_exit_context+0x4d/0x70 [<ffffffff810c8826>] generic_exec_single+0xb6/0x140 [<ffffffff81117410>] ? __perf_remove_from_context+0xb0/0xb0 [<ffffffff81117410>] ? __perf_remove_from_context+0xb0/0xb0 [<ffffffff810c898f>] smp_call_function_single+0xdf/0x140 [<ffffffff81113d27>] perf_event_exit_cpu_context+0x87/0xc0 [<ffffffff81113d73>] perf_reboot+0x13/0x40 [<ffffffff8107578a>] notifier_call_chain+0x4a/0x70 [<ffffffff81075ad7>] __blocking_notifier_call_chain+0x47/0x60 [<ffffffff81075b06>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff81076a1d>] kernel_restart_prepare+0x1d/0x40 [<ffffffff81076ae2>] kernel_restart+0x12/0x60 [<ffffffff81076d56>] SYSC_reboot+0xf6/0x1b0 [<ffffffff811a823c>] ? mntput_no_expire+0x2c/0x1b0 [<ffffffff811a83e4>] ? mntput+0x24/0x40 [<ffffffff811894fc>] ? __fput+0x16c/0x1e0 [<ffffffff811895ae>] ? ____fput+0xe/0x10 [<ffffffff81072fc3>] ? task_work_run+0x83/0xa0 [<ffffffff81001623>] ? exit_to_usermode_loop+0x53/0xc0 [<ffffffff8100105a>] ? trace_hardirqs_on_thunk+0x1a/0x1c [<ffffffff81076e6e>] SyS_reboot+0xe/0x10 [<ffffffff814c4ba5>] entry_SYSCALL_64_fastpath+0x18/0xa3 Code: 7c 4c 8d af c0 01 00 00 49 89 fe eb 10 48 09 c2 4c 89 e0 49 0f b1 55 00 4c 39 e0 74 35 4d 8b a6 c0 01 00 00 41 8b 8e 60 01 00 00 <0f> 33 8b 35 6e 02 8c 00 48 c1 e2 20 85 f6 7e d2 48 89 d3 89 cf RIP [<ffffffff81003c92>] x86_perf_event_update+0x52/0xc0 RSP <ffff880123853b60> ---[ end trace 7ec95181faf211be ]--- note: reboot[3070] exited with preempt_count 2 Cc: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Fixes: f5967101e9de ("x86/hweight: Get rid of the special calling convention") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-08Merge branch 'drm-next-4.8' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie11-18/+39
into drm-next A few fixes for amdgpu and ttm for 4.8 - fix a ttm regression caused by the new pipelining code - fixes for mullins on amdgpu - updated golden settings for amdgpu * 'drm-next-4.8' of git://people.freedesktop.org/~agd5f/linux: drm/ttm: Wait for a BO to become idle before unbinding it from GTT drm/amdgpu: update golden setting of polaris10 drm/amdgpu: update golden setting of stoney drm/amdgpu: update golden setting of polaris11 drm/amdgpu: update golden setting of carrizo drm/amdgpu: update golden setting of iceland drm/amd/amdgpu: change pptable output format from ASCII to binary drm/amdgpu/ci: add mullins to default case for smc ucode drm/amdgpu/gmc7: add missing mullins case
2016-08-08Merge tag 'drm-intel-next-fixes-2016-08-05' of ↵Dave Airlie3-24/+14
git://anongit.freedesktop.org/drm-intel into drm-next 3 intel fixes. * tag 'drm-intel-next-fixes-2016-08-05' of git://anongit.freedesktop.org/drm-intel: drm/i915/fbdev: Check for the framebuffer before use drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVB drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL
2016-08-08drm: Paper over locking inversion after registration reworkDaniel Vetter1-5/+3
drm_connector_register_all requires a few too many locks because our connector_list locking is busted. Add another FIXME+hack to work around this. This should address the below lockdep splat: ====================================================== [ INFO: possible circular locking dependency detected ] 4.7.0-rc5+ #524 Tainted: G O ------------------------------------------------------- kworker/u8:0/6 is trying to acquire lock: (&dev->mode_config.mutex){+.+.+.}, at: [<ffffffff815afde0>] drm_modeset_lock_all+0x40/0x120 but task is already holding lock: ((fb_notifier_list).rwsem){++++.+}, at: [<ffffffff810ac195>] __blocking_notifier_call_chain+0x35/0x70 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 ((fb_notifier_list).rwsem){++++.+}: [<ffffffff810df611>] lock_acquire+0xb1/0x200 [<ffffffff819a55b4>] down_write+0x44/0x80 [<ffffffff810abf91>] blocking_notifier_chain_register+0x21/0xb0 [<ffffffff814c7448>] fb_register_client+0x18/0x20 [<ffffffff814c6c86>] backlight_device_register+0x136/0x260 [<ffffffffa0127eb2>] intel_backlight_device_register+0xa2/0x160 [i915] [<ffffffffa00f46be>] intel_connector_register+0xe/0x10 [i915] [<ffffffffa0112bfb>] intel_dp_connector_register+0x1b/0x80 [i915] [<ffffffff8159dfea>] drm_connector_register+0x4a/0x80 [<ffffffff8159fe44>] drm_connector_register_all+0x64/0xf0 [<ffffffff815a2a64>] drm_modeset_register_all+0x174/0x1c0 [<ffffffff81599b72>] drm_dev_register+0xc2/0xd0 [<ffffffffa00621d7>] i915_driver_load+0x1547/0x2200 [i915] [<ffffffffa006d80f>] i915_pci_probe+0x4f/0x70 [i915] [<ffffffff814a2135>] local_pci_probe+0x45/0xa0 [<ffffffff814a349b>] pci_device_probe+0xdb/0x130 [<ffffffff815c07e3>] driver_probe_device+0x223/0x440 [<ffffffff815c0ad5>] __driver_attach+0xd5/0x100 [<ffffffff815be386>] bus_for_each_dev+0x66/0xa0 [<ffffffff815c002e>] driver_attach+0x1e/0x20 [<ffffffff815bf9be>] bus_add_driver+0x1ee/0x280 [<ffffffff815c1810>] driver_register+0x60/0xe0 [<ffffffff814a1a10>] __pci_register_driver+0x60/0x70 [<ffffffffa01a905b>] i915_init+0x5b/0x62 [i915] [<ffffffff8100042d>] do_one_initcall+0x3d/0x150 [<ffffffff811a935b>] do_init_module+0x5f/0x1d9 [<ffffffff81124416>] load_module+0x20e6/0x27e0 [<ffffffff81124d63>] SYSC_finit_module+0xc3/0xf0 [<ffffffff81124dae>] SyS_finit_module+0xe/0x10 [<ffffffff819a83a9>] entry_SYSCALL_64_fastpath+0x1c/0xac -> #0 (&dev->mode_config.mutex){+.+.+.}: [<ffffffff810df0ac>] __lock_acquire+0x10fc/0x1260 [<ffffffff810df611>] lock_acquire+0xb1/0x200 [<ffffffff819a3097>] mutex_lock_nested+0x67/0x3c0 [<ffffffff815afde0>] drm_modeset_lock_all+0x40/0x120 [<ffffffff8158f79b>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2b/0x80 [<ffffffff8158f81d>] drm_fb_helper_set_par+0x2d/0x50 [<ffffffffa0105f7a>] intel_fbdev_set_par+0x1a/0x60 [i915] [<ffffffff814c13c6>] fbcon_init+0x586/0x610 [<ffffffff8154d16a>] visual_init+0xca/0x130 [<ffffffff8154e611>] do_bind_con_driver+0x1c1/0x3a0 [<ffffffff8154eaf6>] do_take_over_console+0x116/0x180 [<ffffffff814bd3a7>] do_fbcon_takeover+0x57/0xb0 [<ffffffff814c1e48>] fbcon_event_notify+0x658/0x750 [<ffffffff810abcae>] notifier_call_chain+0x3e/0xb0 [<ffffffff810ac1ad>] __blocking_notifier_call_chain+0x4d/0x70 [<ffffffff810ac1e6>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff814c748b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff814c86b1>] register_framebuffer+0x251/0x330 [<ffffffff8158fa9f>] drm_fb_helper_initial_config+0x25f/0x3f0 [<ffffffffa0106b48>] intel_fbdev_initial_config+0x18/0x30 [i915] [<ffffffff810adfd8>] async_run_entry_fn+0x48/0x150 [<ffffffff810a3947>] process_one_work+0x1e7/0x750 [<ffffffff810a3efb>] worker_thread+0x4b/0x4f0 [<ffffffff810aad4f>] kthread+0xef/0x110 [<ffffffff819a85ef>] ret_from_fork+0x1f/0x40 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((fb_notifier_list).rwsem); lock(&dev->mode_config.mutex); lock((fb_notifier_list).rwsem); lock(&dev->mode_config.mutex); *** DEADLOCK *** 6 locks held by kworker/u8:0/6: #0: ("events_unbound"){.+.+.+}, at: [<ffffffff810a38c9>] process_one_work+0x169/0x750 #1: ((&entry->work)){+.+.+.}, at: [<ffffffff810a38c9>] process_one_work+0x169/0x750 #2: (registration_lock){+.+.+.}, at: [<ffffffff814c8487>] register_framebuffer+0x27/0x330 #3: (console_lock){+.+.+.}, at: [<ffffffff814c86ce>] register_framebuffer+0x26e/0x330 #4: (&fb_info->lock){+.+.+.}, at: [<ffffffff814c78dd>] lock_fb_info+0x1d/0x40 #5: ((fb_notifier_list).rwsem){++++.+}, at: [<ffffffff810ac195>] __blocking_notifier_call_chain+0x35/0x70 stack backtrace: CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G O 4.7.0-rc5+ #524 Hardware name: Intel Corp. Broxton P/NOTEBOOK, BIOS APLKRVPA.X64.0138.B33.1606250842 06/25/2016 Workqueue: events_unbound async_run_entry_fn 0000000000000000 ffff8800758577f0 ffffffff814507a5 ffffffff828b9900 ffffffff828b9900 ffff880075857830 ffffffff810dc6fa ffff880075857880 ffff88007584d688 0000000000000005 0000000000000006 ffff88007584d6b0 Call Trace: [<ffffffff814507a5>] dump_stack+0x67/0x92 [<ffffffff810dc6fa>] print_circular_bug+0x1aa/0x200 [<ffffffff810df0ac>] __lock_acquire+0x10fc/0x1260 [<ffffffff810df611>] lock_acquire+0xb1/0x200 [<ffffffff815afde0>] ? drm_modeset_lock_all+0x40/0x120 [<ffffffff815afde0>] ? drm_modeset_lock_all+0x40/0x120 [<ffffffff819a3097>] mutex_lock_nested+0x67/0x3c0 [<ffffffff815afde0>] ? drm_modeset_lock_all+0x40/0x120 [<ffffffff810fa85f>] ? rcu_read_lock_sched_held+0x7f/0x90 [<ffffffff81208218>] ? kmem_cache_alloc_trace+0x248/0x2b0 [<ffffffff815afdc5>] ? drm_modeset_lock_all+0x25/0x120 [<ffffffff815afde0>] drm_modeset_lock_all+0x40/0x120 [<ffffffff8158f79b>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2b/0x80 [<ffffffff8158f81d>] drm_fb_helper_set_par+0x2d/0x50 [<ffffffffa0105f7a>] intel_fbdev_set_par+0x1a/0x60 [i915] [<ffffffff814c13c6>] fbcon_init+0x586/0x610 [<ffffffff8154d16a>] visual_init+0xca/0x130 [<ffffffff8154e611>] do_bind_con_driver+0x1c1/0x3a0 [<ffffffff8154eaf6>] do_take_over_console+0x116/0x180 [<ffffffff814bd3a7>] do_fbcon_takeover+0x57/0xb0 [<ffffffff814c1e48>] fbcon_event_notify+0x658/0x750 [<ffffffff810abcae>] notifier_call_chain+0x3e/0xb0 [<ffffffff810ac1ad>] __blocking_notifier_call_chain+0x4d/0x70 [<ffffffff810ac1e6>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff814c748b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff814c86b1>] register_framebuffer+0x251/0x330 [<ffffffff815b7e8d>] ? vga_switcheroo_client_fb_set+0x5d/0x70 [<ffffffff8158fa9f>] drm_fb_helper_initial_config+0x25f/0x3f0 [<ffffffffa0106b48>] intel_fbdev_initial_config+0x18/0x30 [i915] [<ffffffff810adfd8>] async_run_entry_fn+0x48/0x150 [<ffffffff810a3947>] process_one_work+0x1e7/0x750 [<ffffffff810a38c9>] ? process_one_work+0x169/0x750 [<ffffffff810a3efb>] worker_thread+0x4b/0x4f0 [<ffffffff810a3eb0>] ? process_one_work+0x750/0x750 [<ffffffff810aad4f>] kthread+0xef/0x110 [<ffffffff819a85ef>] ret_from_fork+0x1f/0x40 [<ffffffff810aac60>] ? kthread_stop+0x2e0/0x2e0 v2: Rebase onto the right branch (hand-editing patches ftw) and add more reporters. Reported-by: Imre Deak <imre.deak@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Reported-by: Jiri Kosina <jikos@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-08drm: rcar-du: Link HDMI encoder with bridgeLaurent Pinchart1-0/+1
The conversion of the rcar-du driver from the I2C slave encoder to the DRM bridge API left the HDMI encoder's bridge pointer NULL, preventing the bridge from being handled automatically by the DRM core. Fix it. Fixes: 1d926114d8f4 ("drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-07Linux 4.8-rc1v4.8-rc1Linus Torvalds1-2/+2
2016-08-07Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds62-213/+213
Pull more block fixes from Jens Axboe: "As mentioned in the pull the other day, a few more fixes for this round, all related to the bio op changes in this series. Two fixes, and then a cleanup, renaming bio->bi_rw to bio->bi_opf. I wanted to do that change right after or right before -rc1, so that risk of conflict was reduced. I just rebased the series on top of current master, and no new ->bi_rw usage has snuck in" * 'for-linus' of git://git.kernel.dk/linux-block: block: rename bio bi_rw to bi_opf target: iblock_execute_sync_cache() should use bio_set_op_attrs() mm: make __swap_writepage() use bio_set_op_attrs() block/mm: make bdev_ops->rw_page() take a bool for read/write
2016-08-07Merge tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds22-156/+334
Pull drm zpos property support from Dave Airlie: "This tree was waiting on some media stuff I hadn't had time to get a stable branchpoint off, so I just waited until it was all in your tree first. It's been around a bit on the list and shouldn't affect anything outside adding the generic API and moving some ARM drivers to using it" * tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux: drm: rcar: use generic code for managing zpos plane property drm/exynos: use generic code for managing zpos plane property drm: sti: use generic zpos for plane drm: add generic zpos property
2016-08-07block: rename bio bi_rw to bi_opfJens Axboe51-157/+158
Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07target: iblock_execute_sync_cache() should use bio_set_op_attrs()Jens Axboe1-1/+1
The original commit missed this function, it needs to mark it a write flush. Cc: Mike Christie <mchristi@redhat.com> Fixes: e742fc32fcb4 ("target: use bio op accessors") Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07mm: make __swap_writepage() use bio_set_op_attrs()Jens Axboe1-2/+3
Cleaner than manipulating bio->bi_rw flags directly. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07block/mm: make bdev_ops->rw_page() take a bool for read/writeJens Axboe11-53/+51
Commit abf545484d31 changed it from an 'rw' flags type to the newer ops based interface, but now we're effectively leaking some bdev internals to the rest of the kernel. Since we only care about whether it's a read or a write at that level, just pass in a bool 'is_write' parameter instead. Then we can also move op_is_write() and friends back under CONFIG_BLOCK protection. Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07Merge tag 'doc-4.8-fixes' of git://git.lwn.net/linuxLinus Torvalds16-34/+31
Pull documentation fixes from Jonathan Corbet: "Three fixes for the docs build, including removing an annoying warning on 'make help' if sphinx isn't present" * tag 'doc-4.8-fixes' of git://git.lwn.net/linux: DocBook: use DOCBOOKS="" to ignore DocBooks instead of IGNORE_DOCBOOKS=1 Documenation: update cgroup's document path Documentation/sphinx: do not warn about missing tools in 'make help'
2016-08-07Merge tag 'binfmt-for-linus' of ↵Linus Torvalds4-2/+67
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc Pull binfmt_misc update from James Bottomley: "This update is to allow architecture emulation containers to function such that the emulation binary can be housed outside the container itself. The container and fs parts both have acks from relevant experts. To use the new feature you have to add an F option to your binfmt_misc configuration" From the docs: "The usual behaviour of binfmt_misc is to spawn the binary lazily when the misc format file is invoked. However, this doesn't work very well in the face of mount namespaces and changeroots, so the F mode opens the binary as soon as the emulation is installed and uses the opened image to spawn the emulator, meaning it is always available once installed, regardless of how the environment changes" * tag 'binfmt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc: binfmt_misc: add F option description to documentation binfmt_misc: add persistent opened binary handler for containers fs: add filp_clone_open API
2016-08-07fs: return EPERM on immutable inodeEryu Guan4-4/+5
In most cases, EPERM is returned on immutable inode, and there're only a few places returning EACCES. I noticed this when running LTP on overlayfs, setxattr03 failed due to unexpected EACCES on immutable inode. So converting all EACCES to EPERM on immutable inode. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-07Merge branch 'for-linus-2' of ↵Linus Torvalds32-130/+82
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: "Assorted cleanups and fixes. In the "trivial API change" department - ->d_compare() losing 'parent' argument" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: cachefiles: Fix race between inactivating and culling a cache object 9p: use clone_fid() 9p: fix braino introduced in "9p: new helper - v9fs_parent_fid()" vfs: make dentry_needs_remove_privs() internal vfs: remove file_needs_remove_privs() vfs: fix deadlock in file_remove_privs() on overlayfs get rid of 'parent' argument of ->d_compare() cifs, msdos, vfat, hfs+: don't bother with parent in ->d_compare() affs ->d_compare(): don't bother with ->d_inode fold _d_rehash() and __d_rehash() together fold dentry_rcuwalk_invalidate() into its only remaining caller
2016-08-06Merge tag 'xfs-rmap-for-linus-4.8-rc1' of ↵Linus Torvalds64-915/+6267
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull more xfs updates from Dave Chinner: "This is the second part of the XFS updates for this merge cycle, and contains the new reverse block mapping feature for XFS. Reverse mapping allows us to track the owner of a specific block on disk precisely. It is implemented as a set of btrees (one per allocation group) that track the owners of allocated extents. Effectively it is a "used space tree" that is updated when we allocate or free extents. i.e. it is coherent with the free space btrees we already maintain and never overlaps with them. This reverse mapping infrastructure is the building block of several upcoming features - reflink, copy-on-write data, dedupe, online metadata and data scrubbing, highly accurate bad sector/data loss reporting to users, and significantly improved reconstruction of damaged and corrupted filesystems. There's a lot of new stuff coming along in the next couple of cycles,a nd it all builds in the rmap infrastructure. As such, it's a huge chunk of new code with new on-disk format features and internal infrastructure. It warns at mount time as an experimental feature and that it may eat data (as we do with all new on-disk features until they stabilise). We have not released userspace suport for it yet - userspace support currently requires download from Darrick's xfsprogs repo and build from source, so the access to this feature is really developer/tester only at this point. Initial userspace support will be released at the same time kernel with this code in it is released. The new rmap enabled code regresses 3 xfstests - all are ENOSPC related corner cases, one of which Darrick posted a fix for a few hours ago. The other two are fixed by infrastructure that is part of the upcoming reflink patchset. This new ENOSPC infrastructure requires a on-disk format tweak required to keep mount times in check - we need to keep an on-disk count of allocated rmapbt blocks so we don't have to scan the entire btrees at mount time to count them. This is currently being tested and will be part of the fixes sent in the next week or two so users will not be exposed to this change" * tag 'xfs-rmap-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (52 commits) xfs: move (and rename) the deferred bmap-free tracepoints xfs: collapse single use static functions xfs: remove unnecessary parentheses from log redo item recovery functions xfs: remove the extents array from the rmap update done log item xfs: in btree_lshift, only allocate temporary cursor when needed xfs: remove unnecesary lshift/rshift key initialization xfs: remove the get*keys and update_keys btree ops pointers xfs: enable the rmap btree functionality xfs: don't update rmapbt when fixing agfl xfs: disable XFS_IOC_SWAPEXT when rmap btree is enabled xfs: add rmap btree block detection to log recovery xfs: add rmap btree geometry feature flag xfs: propagate bmap updates to rmapbt xfs: enable the xfs_defer mechanism to process rmaps to update xfs: log rmap intent items xfs: create rmap update intent log items xfs: add rmap btree insert and delete helpers xfs: convert unwritten status of reverse mappings xfs: remove an extent from the rmap btree xfs: add an extent to the rmap btree ...
2016-08-06Merge branch 'work.const-qstr' of ↵Linus Torvalds37-100/+95
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull qstr constification updates from Al Viro: "Fairly self-contained bunch - surprising lot of places passes struct qstr * as an argument when const struct qstr * would suffice; it complicates analysis for no good reason. I'd prefer to feed that separately from the assorted fixes (those are in #for-linus and with somewhat trickier topology)" * 'work.const-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: qstr: constify instances in adfs qstr: constify instances in lustre qstr: constify instances in f2fs qstr: constify instances in ext2 qstr: constify instances in vfat qstr: constify instances in procfs qstr: constify instances in fuse qstr constify instances in fs/dcache.c qstr: constify instances in nfs qstr: constify instances in ocfs2 qstr: constify instances in autofs4 qstr: constify instances in hfs qstr: constify instances in hfsplus qstr: constify instances in logfs qstr: constify dentry_init_security
2016-08-06Merge tag 'media/v4.8-6' of ↵Linus Torvalds1-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull mailcap fixlets from Mauro Carvalho Chehab: "A small fixup for my and Shuah's entries in .mailcap. Basically, those entries were with a syntax that makes get_maintainer.pl to do the wrong thing" * tag 'media/v4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: .mailmap: Correct entries for Mauro Carvalho Chehab and Shuah Khan
2016-08-06Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds28-201/+3765
Pull virtio/vhost updates from Michael Tsirkin: - new vsock device support in host and guest - platform IOMMU support in host and guest, including compatibility quirks for legacy systems. - misc fixes and cleanups. * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: VSOCK: Use kvfree() vhost: split out vringh Kconfig vhost: detect 32 bit integer wrap around vhost: new device IOTLB API vhost: drop vringh dependency vhost: convert pre sorted vhost memory array to interval tree vhost: introduce vhost memory accessors VSOCK: Add Makefile and Kconfig VSOCK: Introduce vhost_vsock.ko VSOCK: Introduce virtio_transport.ko VSOCK: Introduce virtio_vsock_common.ko VSOCK: defer sock removal to transports VSOCK: transport-specific vsock_transport functions vhost: drop vringh dependency vop: pull in vhost Kconfig virtio: new feature to detect IOMMU device quirk balloon: check the number of available pages in leak balloon vhost: lockless enqueuing vhost: simplify work flushing
2016-08-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds21-117/+273
Pull more KVM updates from Paolo Bonzini: - ARM bugfix and MSI injection support - x86 nested virt tweak and OOPS fix - Simplify pvclock code (vdso bits acked by Andy Lutomirski). * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: nvmx: mark ept single context invalidation as supported nvmx: remove comment about missing nested vpid support KVM: lapic: fix access preemption timer stuff even if kernel_irqchip=off KVM: documentation: fix KVM_CAP_X2APIC_API information x86: vdso: use __pvclock_read_cycles pvclock: introduce seqcount-like API arm64: KVM: Set cpsr before spsr on fault injection KVM: arm: vgic-irqfd: Workaround changing kvm_set_routing_entry prototype KVM: arm/arm64: Enable MSI routing KVM: arm/arm64: Enable irqchip routing KVM: Move kvm_setup_default/empty_irq_routing declaration in arch specific header KVM: irqchip: Convey devid to kvm_set_msi KVM: Add devid in kvm_kernel_irq_routing_entry KVM: api: Pass the devid in the msi routing entry
2016-08-06Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds69-806/+1418
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.8. Also includes is a minor SSB cleanup as SSB code traditionally is merged through the MIPS tree: ATH25: - MIPS: Add default configuration for ath25 Boot: - For zboot, copy appended dtb to the end of the kernel - store the appended dtb address in a variable BPF: - Fix off by one error in offset allocation Cobalt code: - Fix typos Core code: - debugfs_create_file returns NULL on error, so don't use IS_ERR for testing for errors. - Fix double locking issue in RM7000 S-cache code. This would only affect RM7000 ARC systems on reboot. - Fix page table corruption on THP permission changes. - Use compat_sys_keyctl for 32 bit userspace on 64 bit kernels. David says, there are no compatibility issues raised by this fix. - Move some signal code around. - Rewrite r4k count/compare clockevent device registration such that min_delta_ticks/max_delta_ticks files are guaranteed to be initialized. - Only register r4k count/compare as clockevent device if we can assume the clock to be constant. - Fix MSA asm warnings in control reg accessors - uasm and tlbex fixes and tweaking. - Print segment physical address when EU=1. - Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO. - CP: Allow booting by VP other than VP 0 - Cache handling fixes and optimizations for r4k class caches - Add hotplug support for R6 processors - Cleanup hotplug bits in kconfig - traps: return correct si code for accessing nonmapped addresses - Remove cpu_has_safe_index_cacheops Lantiq: - Register IRQ handler for virtual IRQ number - Fix EIU interrupt loading code - Use the real EXIN count - Fix build error. Loongson 3: - Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES Octeon: - Delete built-in DTB pruning code for D-Link DSR-1000N. - Clean up GPIO definitions in dlink_dsr-1000n.dts. - Add more LEDs to the DSR-100n DTS - Fix off by one in octeon_irq_gpio_map() - Typo fixes - Enable SATA by default in cavium_octeon_defconfig - Support readq/writeq() - Remove forced mappings of USB interrupts. - Ensure DMA descriptors are always in the low 4GB - Improve USB reset code for OCTEON II. Pistachio: - Add maintainers entry for pistachio SoC Support - Remove plat_setup_iocoherency Ralink: - Fix pwm UART in spis group pinmux. SSB: - Change bare unsigned to unsigned int to suit coding style Tools: - Fix reloc tool compiler warnings. Other: - Delete use of ARCH_WANT_OPTIONAL_GPIOLIB" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (61 commits) MIPS: mm: Fix definition of R6 cache instruction MIPS: tools: Fix relocs tool compiler warnings MIPS: Cobalt: Fix typo MIPS: Octeon: Fix typo MIPS: Lantiq: Fix build failure MIPS: Use CPHYSADDR to implement mips32 __pa MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds. MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts. MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N. MIPS: store the appended dtb address in a variable MIPS: ZBOOT: copy appended dtb to the end of the kernel MIPS: ralink: fix spis group pinmux MIPS: Factor o32 specific code into signal_o32.c MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is present MIPS: Use per-mm page to execute branch delay slot instructions MIPS: Modify error handling MIPS: c-r4k: Use SMP calls for CM indexed cache ops MIPS: c-r4k: Avoid small flush_icache_range SMP calls MIPS: c-r4k: Local flush_icache_range cache op override MIPS: c-r4k: Split r4k_flush_kernel_vmap_range() ...
2016-08-06Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds28-111/+402
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Mostly tooling fixes and some late tooling updates, plus two perf related printk message fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tests bpf: Use SyS_epoll_wait alias perf tests: objdump output can contain multi byte chunks perf record: Add --sample-cpu option perf hists: Introduce output_resort_cb method perf tools: Move config/Makefile into Makefile.config perf tests: Add test for bitmap_scnprintf function tools lib: Add bitmap_and function tools lib: Add bitmap_scnprintf function tools lib: Add bitmap_alloc function tools lib traceevent: Ignore generated library files perf tools: Fix build failure on perl script context perf/core: Change log level for duration warning to KERN_INFO perf annotate: Plug filename string leak perf annotate: Introduce strerror for handling symbol__disassemble() errors perf annotate: Rename symbol__annotate() to symbol__disassemble() perf/x86: Modify error message in virtualized environment perf target: str_error_r() always returns the buffer it receives perf annotate: Use pipe + fork instead of popen perf evsel: Introduce constructor for cycles event
2016-08-06Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds7-14/+49
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two fixes and a cleanup-fix, to the syscall entry code and to ptrace" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/syscalls/64: Add compat_sys_keyctl for 32-bit userspace x86/ptrace: Stop setting TS_COMPAT in ptrace code x86/vdso: Error out if the vDSO isn't a valid DSO
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 09:34:53 +0000