summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-03-04kbuild: remove cc-version macroMasahiro Yamada2-21/+1
There is no more direct user of this macro; it is only used by cc-ifversion. Calling this macro is not efficient since it invokes the compiler to get the compiler version. CONFIG_GCC_VERSION is already calculated in the Kconfig stage, so Makefile can reuse it. Here is a note about the slight difference between cc-version and CONFIG_GCC_VERSION: When using Clang, cc-version is evaluated to '0402' because Clang defines __GNUC__ and __GNUC__MINOR__, and looks like GCC 4.2 in the version point of view. On the other hand, CONFIG_GCC_VERSION=0 when $(CC) is clang. There are currently two users of cc-ifversion: arch/mips/loongson64/Platform arch/powerpc/Makefile They are not affected by this change. The format of cc-version is <major><minor>, while CONFIG_GCC_VERSION <major><minor><patch>. I adjusted cc-ifversion for the difference of the number of digits. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-04kbuild: update comment block of scripts/clang-version.shMasahiro Yamada1-7/+3
Commit 469cb7376c06 ("kconfig: add CC_IS_CLANG and CLANG_VERSION") changed the code, but missed to update the comment block. The -p option was gone, and the output is 5-digit (or 6-digit when Clang 10 is released). Update the comment now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-04kbuild: remove commented-out INITRD_COMPRESSMasahiro Yamada1-13/+0
This code has been commented out since commit b7000adef17a ("Don't set the INITRD_COMPRESS environment variable automatically"). Clean it up now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-28kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to KconfigMasahiro Yamada2-2/+4
CONFIG_DEBUG_INFO_SPLIT and CONFIG_DEBUG_INFO_DWARF4 enable extra dwarf options if supported. You never know if they are really enabled since Makefile may silently turn them off. The actual behavior will match to the kernel configuration by testing those compiler flags in the Kconfig stage. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-28kbuild: [bin]deb-pkg: add DPKG_FLAGS variableKacper Kołodziej1-2/+2
DPKG_FLAGS variable lets user to add more flags to dpkg-buildpackage command in deb-pkg and bindeb-pkg. Signed-off-by: Kacper Kołodziej <kacper@kolodziej.it> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-27kbuild: move ".config not found!" message from Kconfig to MakefileMasahiro Yamada2-15/+8
If you run "make" in a pristine source tree, currently Kbuild will start to build Kconfig to let it show the error message. It would be more straightforward to check it in Makefile and let it fail immediately. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-27kbuild: invoke syncconfig if include/config/auto.conf.cmd is missingMasahiro Yamada1-2/+5
If include/config/auto.conf.cmd is lost for some reasons, it is not self-healing, so the top Makefile misses to run syncconfig. Move include/config/auto.conf.cmd to the target side. I used a pattern rule instead of a normal rule here although it is a bit gross. If the rule were written with a normal rule like this, include/config/auto.conf \ include/config/auto.conf.cmd \ include/config/tristate.conf: $(KCONFIG_CONFIG) $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig ... syncconfig would be executed per target. Using a pattern rule makes sure that syncconfig is executed just once because Make assumes the recipe will create all of the targets. Here is a quote from the GNU Make manual [1]: "Pattern rules may have more than one target. Unlike normal rules, this does not act as many different rules with the same prerequisites and recipe. If a pattern rule has multiple targets, make knows that the rule's recipe is responsible for making all of the targets. The recipe is executed only once to make all the targets. When searching for a pattern rule to match a target, the target patterns of a rule other than the one that matches the target in need of a rule are incidental: make worries only about giving a recipe and prerequisites to the file presently in question. However, when this file's recipe is run, the other targets are marked as having been updated themselves." [1]: https://www.gnu.org/software/make/manual/html_node/Pattern-Intro.html Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-27kbuild: simplify single target rulesMasahiro Yamada1-29/+18
The dependency will be checked anyway after Kbuild descends into a sub-directory. Skip object/source dependency checks in top Makefile. VPATH can be simpler since the top Makefile no longer checks the presence of the source file, which is located in in the external module directory. One good thing is, it can compile an object from a generated source file. $ make crypto/rsapubkey.asn1.o ... ASN.1 crypto/rsapubkey.asn1.c CC crypto/rsapubkey.asn1.o Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-27kbuild: remove empty rules for makefilesMasahiro Yamada1-8/+5
The previous commit made 'MAKEFLAGS += -rR' effective in the top Makefile regardless of O= option, GNU Make versions. The top Makefile does not need to cancel implicit rules for makefiles. There is still one place where an empty rule is useful. Since -rR is effective only after sub-make, GNU Make would try implicit rules to update the top Makefile. Although it is not a big overhead, cancel it just in case. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-27kbuild: make -r/-R effective in top Makefile for old Make versionsMasahiro Yamada1-22/+26
Adding -rR to MAKEFLAGS is important because we do not want to be bothered by built-in implicit rules or variables. One problem that used to exist in older GNU Make versions is MAKEFLAGS += -rR ... does not become effective in the current Makefile. When you are building with O= option, it becomes effective in the top Makefile since it recurses via 'sub-make' target. Otherwise, the top Makefile tries implicit rules. That is why we explicitly add empty rules for Makefiles, but we often miss to do that. In fact, adding -d option to older GNU Make versions shows it is trying a bunch of implicit pattern rules. Considering target file `scripts/Makefile.kcov'. Looking for an implicit rule for `scripts/Makefile.kcov'. Trying pattern rule with stem `Makefile.kcov'. Trying implicit prerequisite `scripts/Makefile.kcov.o'. Trying pattern rule with stem `Makefile.kcov'. Trying implicit prerequisite `scripts/Makefile.kcov.c'. Trying pattern rule with stem `Makefile.kcov'. Trying implicit prerequisite `scripts/Makefile.kcov.cc'. Trying pattern rule with stem `Makefile.kcov'. Trying implicit prerequisite `scripts/Makefile.kcov.C'. ... This issue was fixed by GNU Make commit 58dae243526b ("[Savannah #20501] Handle adding -r/-R to MAKEFLAGS in the makefile"). So, it is no longer a problem if you use GNU Make 4.0 or later. However, older versions are still widely used. So, I decided to patch the kernel Makefile to invoke sub-make regardless of O= option. This will allow further cleanups. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-27kbuild: move tools_silent to a more relevant placeMasahiro Yamada1-1/+5
This would disturb the change the sub-make part. Move it near the tools/ target. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-27kbuild: compute false-positive -Wmaybe-uninitialized cases in KconfigMasahiro Yamada3-7/+21
Since -Wmaybe-uninitialized was introduced by GCC 4.7, we have patched various false positives: - commit e74fc973b6e5 ("Turn off -Wmaybe-uninitialized when building with -Os") turned off this option for -Os. - commit 815eb71e7149 ("Kbuild: disable 'maybe-uninitialized' warning for CONFIG_PROFILE_ALL_BRANCHES") turned off this option for CONFIG_PROFILE_ALL_BRANCHES - commit a76bcf557ef4 ("Kbuild: enable -Wmaybe-uninitialized warning for "make W=1"") turned off this option for GCC < 4.9 Arnd provided more explanation in https://lkml.org/lkml/2017/3/14/903 I think this looks better by shifting the logic from Makefile to Kconfig. Link: https://github.com/ClangBuiltLinux/linux/issues/350 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com>
2019-02-27kbuild: refactor cc-cross-prefix implementationMasahiro Yamada1-8/+4
- $(word 1, <text>) is equivalent to $(firstword <text>) - hardcode "gcc" instead of $(CC) - minimize the shell script part A little more notes in case $(filter-out -%, ...) is not clear. arch/mips/Makefile passes prefixes depending on the configuration. CROSS_COMPILE := $(call cc-cross-prefix, $(tool-archpref)-linux- \ $(tool-archpref)-linux-gnu- $(tool-archpref)-unknown-linux-gnu-) In the Kconfig stage (e.g. when you run 'make defconfig'), neither CONFIG_32BIT nor CONFIG_64BIT is defined. So, $(tool-archpref) is empty. As a result, "-linux -linux-gnu- -unknown-linux-gnu" is passed into cc-cross-prefix. The command 'which' assumes arguments starting with a hyphen as command options, then emits the following messages: Illegal option -l Illegal option -l Illegal option -u I think it is strange to define CROSS_COMPILE depending on the CONFIG options since you need to feed $(CC) to Kconfig, but it is how MIPS Makefile currently works. Anyway, it would not hurt to filter-out invalid strings beforehand. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-27kbuild: hardcode genksyms path and remove GENKSYMS variableMasahiro Yamada2-4/+3
The genksyms source was integrated into the kernel tree in 2003. I do not expect anybody still using the external /sbin/genksyms. Kbuild does not need to provide the ability to override GENKSYMS. Let's remove the GENKSYMS variable, and use the hardcoded path. Since it occurred in the pre-git era, I attached the commit message in case somebody is interested in the historical background. | Author: Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de> | Date: Wed Feb 19 04:17:28 2003 -0600 | | kbuild: [PATCH] put genksyms in scripts dir | | This puts genksyms into scripts/genksyms/. | | genksyms used to be maintained externally, though the only possible user | was the kernel build. Moving it into the kernel sources makes it easier to | keep it uptodate, like for example updating it to generate linker scripts | directly instead of postprocessing the generated header file fragments | with sed, as we do currently. | | Also, genksyms does not handle __typeof__, which needs to be fixed since | some of the exported symbol in the kernel are defined using __typeof__. | | (Rusty Russell/me) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-27scripts/gdb: refactor rules for symlink creationMasahiro Yamada1-7/+11
gdb-scripts is not a real object, but (ab)used like a phony target. Rewrite the code in a more Kbuild-ish way. Add symlinks to extra-y and use if_changed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-02-27kbuild: create symlink to vmlinux-gdb.py in scripts_gdb targetMasahiro Yamada1-3/+1
It is weird to create gdb stuff as a side-effect of vmlinux. Move it to a more relevant place. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-02-27scripts/gdb: do not descend into scripts/gdb from scriptsMasahiro Yamada3-9/+5
Currently, Kbuild descends from scripts/Makefile to scripts/gdb/Makefile just for creating symbolic links, but it does not need to do it so early. Merge the two descending paths to simplify the code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-02-27kbuild: remove unimportant comments from ./KbuildMasahiro Yamada1-11/+4
Every time we add/remove a target, we need to touch the header part, including renumbering. This is not so important information. Numbering targets is rather misleading because they are not necessarily generated in this order. For example, 1) and 2) can be executed simultaneously when the -j option is given. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-02-27scripts/gdb: delay generation of gdb constants.pyMasahiro Yamada2-10/+11
scripts/gdb/linux/constants.py is never used in the kernel build process. There is no good reason to create it so early. Get it out of the 'prepare' stage. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-02-20kbuild: turn '/' into an alias of './'Masahiro Yamada2-3/+4
Commit 06300b21f4c7 ("kbuild: support building individual files for external modules") introduced the '/' target. It works only for external modules to build all .o files, but skip the modpost stage. However, 'make /' looks a bit weird to me. 'make ./' is more sensible if you want to build all objects under the current directory, and it works as expected. Let's change '/' into a phony target that is an alias of './', but I may feel like deprecating it in the future. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-20kbuild: set KBUILD_MODULES=1 all the time for single target %/Masahiro Yamada1-6/+3
It is fine to set KBUILD_MODULES=1 when CONFIG_MODULES is disabled. It is actually how "make allnoconfig all" works. On the other hand, KBUILD_MODULES=1 is unneeded for the %.ko pattern. It is just a matter of whether modules.order is generated or not. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-20kbuild: generate modules.order only when CONFIG_MODULES=yMasahiro Yamada1-0/+2
Do not generate pointless modules.order when the module support is disabled. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-20kbuild: pkg: use -f $(srctree)/Makefile to recurse to top MakefileMasahiro Yamada4-10/+12
'$(MAKE) KBUILD_SRC=' changes the working directory back and forth between objtree and srctree. It is better to recurse to the top-level Makefile directly. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-20kbuild: clang: choose GCC_TOOLCHAIN_DIR not on LDNick Desaulniers1-1/+1
This causes an issue when trying to build with `make LD=ld.lld` if ld.lld and the rest of your cross tools aren't in the same directory (ex. /usr/local/bin) (as is the case for Android's build system), as the GCC_TOOLCHAIN_DIR then gets set based on `which $(LD)` which will point where LLVM tools are, not GCC/binutils tools are located. Instead, select the GCC_TOOLCHAIN_DIR based on another tool provided by binutils for which LLVM does not provide a substitute for, such as elfedit. Fixes: 785f11aa595b ("kbuild: Add better clang cross build support") Link: https://github.com/ClangBuiltLinux/linux/issues/341 Suggested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-20kbuild: Disable extra debugging info in .s outputMasahiro Yamada2-6/+9
Modern gcc adds view assignments, reset assertion checking in .loc directives and a couple more additional debug markers, which clutters the asm output unnecessarily: For example: bsp_resume: .LFB3466: .loc 1 1868 1 is_stmt 1 view -0 .cfi_startproc .loc 1 1869 2 view .LVU73 # arch/x86/kernel/cpu/common.c:1869: if (this_cpu->c_bsp_resume) .loc 1 1869 14 is_stmt 0 view .LVU74 movq this_cpu(%rip), %rax # this_cpu, this_cpu movq 64(%rax), %rax # this_cpu.94_1->c_bsp_resume, _2 # arch/x86/kernel/cpu/common.c:1869: if (this_cpu->c_bsp_resume) .loc 1 1869 5 view .LVU75 testq %rax, %rax # _2 je .L8 #, .loc 1 1870 3 is_stmt 1 view .LVU76 movq $boot_cpu_data, %rdi #, jmp __x86_indirect_thunk_rax or .loc 2 57 9 view .LVU478 .loc 2 57 9 view .LVU479 .loc 2 57 9 view .LVU480 .loc 2 57 9 view .LVU481 .LBB1385: .LBB1383: .LBB1379: .LBB1377: .LBB1375: .loc 2 57 9 view .LVU482 .loc 2 57 9 view .LVU483 movl %edi, %edx # cpu, cpu .LVL87: .loc 2 57 9 is_stmt 0 view .LVU484 That MOV in there is drowned in debugging information and latter makes it hard to follow the asm. And that DWARF info is not really needed for asm output staring. Disable the debug information generation which clutters the asm output unnecessarily: bsp_resume: # arch/x86/kernel/cpu/common.c:1869: if (this_cpu->c_bsp_resume) movq this_cpu(%rip), %rax # this_cpu, this_cpu movq 64(%rax), %rax # this_cpu.94_1->c_bsp_resume, _2 # arch/x86/kernel/cpu/common.c:1869: if (this_cpu->c_bsp_resume) testq %rax, %rax # _2 je .L8 #, # arch/x86/kernel/cpu/common.c:1870: this_cpu->c_bsp_resume(&boot_cpu_data); movq $boot_cpu_data, %rdi #, jmp __x86_indirect_thunk_rax .L8: # arch/x86/kernel/cpu/common.c:1871: } rep ret .size bsp_resume, .-bsp_resume [ bp: write commit message. ] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2019-02-19kallsyms: include <asm/bitsperlong.h> instead of <asm/types.h>Masahiro Yamada1-1/+1
<asm/bitsperlong.h> is enough to include the definition of BITS_PER_LONG. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-19kallsyms: remove unneeded memset() callsMasahiro Yamada1-3/+0
Global variables in the .bss section are zeroed out before the program starts to run. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-19kallsyms: add static qualifiers where missingMasahiro Yamada1-4/+4
Fix the following sparse warnings: scripts/kallsyms.c:65:5: warning: symbol 'token_profit' was not declared. Should it be static? scripts/kallsyms.c:68:15: warning: symbol 'best_table' was not declared. Should it be static? scripts/kallsyms.c:69:15: warning: symbol 'best_table_len' was not declared. Should it be static? Also, remove 'inline' from is_arm_mapping_symbol(). The compiler will inline it anyway when it is appropriate to do so. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-19kbuild: gitignore output directoryVladimir Kondratiev1-0/+3
When compiling into output directory using O=, many files created under KBUILD_OUTPUT that git considers as new ones; git clients, ex. "git gui" lists it, and it clutters file list making it difficult to see what was really changed Generate .gitignore in output directory that ignores all its content Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@linux.intel.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-28kbuild: remove meaningless prepare2 targetMasahiro Yamada1-7/+3
There is no build order among the following: prepare3 outputmakefile asm-generic $(version_h) $(autoksyms_h) include/generated/utsrelease.h It is meaningless to insert the prepare2 target between the first three and the last three. The comment says, "prepare2 creates a makefile if using a separate output directory." Let me explain it more precisely. The prepare targets cannot be executed without the .config file. Because the configuration targets depend on the outputmakefile target, the generated makefile is already there before the parepare2 is run. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-28kbuild: remove unnecessary in-subshell executionMasahiro Yamada3-15/+14
The commands surrounded by ( ) are executed in a subshell, but in most cases, we do not need to spawn an extra subshell. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-28kbuild: add real-prereqs shorthand for $(filter-out FORCE,$^)Masahiro Yamada9-19/+25
In Kbuild, if_changed and friends must have FORCE as a prerequisite. Hence, $(filter-out FORCE,$^) or $(filter-out $(PHONY),$^) is a common idiom to get the names of all the prerequisites except phony targets. Add real-prereqs as a shorthand. Note: We cannot replace $(filter %.o,$^) in cmd_link_multi-m because $^ may include auto-generated dependencies from the .*.cmd file when a single object module is changed into a multi object module. Refer to commit 69ea912fda74 ("kbuild: remove unneeded link_multi_deps"). I added some comment to avoid accidental breakage. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Rob Herring <robh@kernel.org>
2019-01-28s390: make built-in.a not directly depend on *.o.chkbss filesMasahiro Yamada3-18/+15
When I was refactoring cmd_ar_builtin in scripts/Makefile.build, I noticed the build breakage of s390. Some Makefiles of s390 add extra dependencies to built-in.a; built-in.a depends on timestamp files *.o.chkbss, but $(AR) does not want to include them into built-in.a. Insert a phony target 'chkbss' in between so that $(AR) can take $(filter-out $(PHONY), $^) as input. While I was here, I refactored Makefile.chkbss a little bit. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-01-28kbuild: simplify rules of data compression with size appendingMasahiro Yamada1-11/+7
All the callers of size_append pass $(filter-out FORCE,$^). Move $(filter-out FORCE,$^) to the definition of size_append. This makes the callers cleaner because $(call ...) is unneeded for a macro with no argument. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-28kbuild: merge KBUILD_VMLINUX_{INIT,MAIN} into KBUILD_VMLINUX_OBJSMasahiro Yamada3-31/+18
The top Makefile does not need to export KBUILD_VMLINUX_INIT and KBUILD_VMLINUX_MAIN separately. Put every built-in.a into KBUILD_VMLINUX_OBJS. The order of $(head-y), $(init-y), $(core-y), ... is still retained. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-28kbuild: remove top-level built-in.aMasahiro Yamada3-37/+10
The symbol table in the final archive is unneeded; the linker does not require the symbol table after the --whole-archive option. Every object file in the archive is included in the link anyway. Pass thin archives from subdirectories directly to the linker, and remove the final archiving step. Fix up the document and comments as well. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Nicholas Piggin <npiggin@gmail.com>
2019-01-28kbuild: skip 'addtree' and 'flags' magic for external module buildMasahiro Yamada2-7/+10
When building an external module, $(obj) is the absolute path to it. The header search paths from ccflags-y etc. should not be tweaked. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-27Linux 5.0-rc4v5.0-rc4Linus Torvalds1-1/+1
2019-01-27Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds8-17/+61
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes for x86: - Fix the swapped outb() parameters in the KASLR code - Fix the PKEY handling at fork which missed to preserve the pkey state for the child. Comes with a test case to validate that. - Fix the entry stack handling for XEN PV to respect that XEN PV systems enter the function already on the current thread stack and not on the trampoline. - Fix kexec load failure caused by using a stale value when the kexec_buf structure is reused for subsequent allocations. - Fix a bogus sizeof() in the memory encryption code - Enforce PCI dependency for the Intel Low Power Subsystem - Enforce PCI_LOCKLESS_CONFIG when PCI is enabled" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/Kconfig: Select PCI_LOCKLESS_CONFIG if PCI is enabled x86/entry/64/compat: Fix stack switching for XEN PV x86/kexec: Fix a kexec_file_load() failure x86/mm/mem_encrypt: Fix erroneous sizeof() x86/selftests/pkeys: Fork() to check for state being preserved x86/pkeys: Properly copy pkey state at fork() x86/kaslr: Fix incorrect i8254 outb() parameters x86/intel/lpss: Make PCI dependency explicit
2019-01-27Merge branch 'x86-timers-for-linus' of ↵Linus Torvalds2-18/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 timer fixes from Thomas Gleixner: "Two commits which were missed to be sent during the merge window. - The TSC calibration fix turns out to be more urgent as recent Skylake-X systems seem to have massive trouble with calibration disturbance. This should go back into stable for that reason and it the risk of breakage is rather low. - Drop an unused define" * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hpet: Remove unused FSEC_PER_NSEC define x86/tsc: Make calibration refinement more robust
2019-01-27Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Glexiner: "A single regression fix to address the unintended breakage of posix cpu timers. This is caused by a new sanity check in the common code, which fails for posix cpu timers under certain conditions because the posix cpu timer code never updates the variable which is checked" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-cpu-timers: Unbreak timer rearming
2019-01-27Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds5-12/+39
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "A small series of fixes which all address possible missed wakeups: - Document and fix the wakeup ordering of wake_q - Add the missing barrier in rcuwait_wake_up(), which was documented in the comment but missing in the code - Fix the possible missed wakeups in the rwsem and futex code" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rwsem: Fix (possible) missed wakeup futex: Fix (possible) missed wakeup sched/wake_q: Fix wakeup ordering for wake_q sched/wake_q: Document wake_q_add() sched/wait: Fix rcuwait_wake_up() ordering
2019-01-27Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds7-16/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A small set of fixes for the interrupt subsystem: - Fix a double increment in the irq descriptor allocator which resulted in a sanity check only being done for every second affinity mask - Add a missing device tree translation in the stm32-exti driver. Without that the interrupt association is completely wrong. - Initialize the mutex in the GIC-V3 MBI driver - Fix the alignment for aliasing devices in the GIC-V3-ITS driver so multi MSI allocations work correctly - Ensure that the initial affinity of a interrupt is not empty at startup time. - Drop bogus include in the madera irq chip driver - Fix KernelDoc regression" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size genirq/irqdesc: Fix double increment in alloc_descs() genirq: Fix the kerneldoc comment for struct irq_affinity_desc irqchip/madera: Drop GPIO includes irqchip/gic-v3-mbi: Fix uninitialized mbi_lock irqchip/stm32-exti: Add domain translate function genirq: Make sure the initial affinity is not empty
2019-01-27Merge tag 'edac_fix_for_5.0' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC fix from Borislav Petkov: "Fix persistent register offsets of altera_edac, from Thor Thayer" * tag 'edac_fix_for_5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, altera: Fix S10 persistent register offset
2019-01-27Merge tag 'for-linus-20190127' of git://git.kernel.dk/linux-blockLinus Torvalds2-11/+10
Pull block revert from Jens Axboe: "Silly error snuck into a patch from the last series, let's do a revert to avoid a potential use-after-free" * tag 'for-linus-20190127' of git://git.kernel.dk/linux-block: Revert "block: cover another queue enter recursion via BIO_QUEUE_ENTERED"
2019-01-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds13-115/+130
Pull KVM fixes from Paolo Bonzini: "Quite a few fixes for x86: nested virtualization save/restore, AMD nested virtualization and virtual APIC, 32-bit fixes, an important fix to restore operation on older processors, and a bunch of hyper-v bugfixes. Several are marked stable. There are also fixes for GCC warnings and for a GCC/objtool interaction" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Mark expected switch fall-throughs KVM: x86: fix TRACE_INCLUDE_PATH and remove -I. header search paths KVM: selftests: check returned evmcs version range x86/kvm/hyper-v: nested_enable_evmcs() sets vmcs_version incorrectly KVM: VMX: Move vmx_vcpu_run()'s VM-Enter asm blob to a helper function kvm: selftests: Fix region overlap check in kvm_util kvm: vmx: fix some -Wmissing-prototypes warnings KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting to L1 svm: Fix AVIC incomplete IPI emulation svm: Add warning message for AVIC IPI invalid target KVM: x86: WARN_ONCE if sending a PV IPI returns a fatal error KVM: x86: Fix PV IPIs for 32-bit KVM host x86/kvm/hyper-v: recommend using eVMCS only when it is enabled x86/kvm/hyper-v: don't recommend doing reset via synthetic MSR kvm: x86/vmx: Use kzalloc for cached_vmcs12 KVM: VMX: Use the correct field var when clearing VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL KVM: x86: Fix single-step debugging x86/kvm/hyper-v: don't announce GUEST IDLE MSR support
2019-01-27Merge tag 'dma-mapping-5.0-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds6-102/+176
Pull dma-mapping fix from Christoph Hellwig: "Fix a xen-swiotlb regression on arm64" * tag 'dma-mapping-5.0-2' of git://git.infradead.org/users/hch/dma-mapping: arm64/xen: fix xen-swiotlb cache flushing
2019-01-27Merge tag 'libnvdimm-fixes-5.0-rc4' of ↵Linus Torvalds6-27/+73
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A fix for namespace label support for non-Intel NVDIMMs that implement the ACPI standard label method. This has apparently never worked and could wait for v5.1. However it has enough visibility with hardware vendors [1] and distro bug trackers [2], and low enough risk that I decided it should go in for -rc4. The other fixups target the new, for v5.0, nvdimm security functionality. The larger init path fixup closes a memory leak and a potential userspace lockup due to missed notifications. [1] https://github.com/pmem/ndctl/issues/78 [2] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1811785 These have all soaked in -next for a week with no reported issues. Summary: - Fix support for NVDIMMs that implement the ACPI standard label methods. - Fix error handling for security overwrite (memory leak / userspace hang condition), and another one-line security cleanup" * tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: acpi/nfit: Fix command-supported detection acpi/nfit: Block function zero DSMs libnvdimm/security: Require nvdimm_security_setup_events() to succeed nfit_test: fix security state pull for nvdimm security nfit_test
2019-01-27Merge branch 'for-linus' of ↵Linus Torvalds5-5/+14
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A fixup for the input_event fix for y2038 Sparc64, and couple other minor fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: input_event - fix the CONFIG_SPARC64 mixup Input: olpc_apsp - assign priv->dev earlier Input: uinput - fix undefined behavior in uinput_validate_absinfo() Input: raspberrypi-ts - fix link error Input: xpad - add support for SteelSeries Stratus Duo Input: input_event - provide override for sparc64
2019-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds41-288/+405
Pull networking fixes from David Miller: 1) Count ttl-dropped frames properly in mac80211, from Bob Copeland. 2) Integer overflow in ktime handling of bcm can code, from Oliver Hartkopp. 3) Fix RX desc handling wrt. hw checksumming in ravb, from Simon Horman. 4) Various hash key fixes in hv_netvsc, from Haiyang Zhang. 5) Use after free in ax25, from Eric Dumazet. 6) Several fixes to the SSN support in SCTP, from Xin Long. 7) Do not process frames after a NAPI reschedule in ibmveth, from Thomas Falcon. 8) Fix NLA_POLICY_NESTED arguments, from Johannes Berg. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits) qed: Revert error handling changes. cfg80211: extend range deviation for DMG cfg80211: reg: remove warn_on for a normal case mac80211: Add attribute aligned(2) to struct 'action' mac80211: don't initiate TDLS connection if station is not associated to AP nl80211: fix NLA_POLICY_NESTED() arguments ibmveth: Do not process frames after calling napi_reschedule net: dev_is_mac_header_xmit() true for ARPHRD_RAWIP net: usb: asix: ax88772_bind return error when hw_reset fail MAINTAINERS: Update cavium networking drivers net/mlx4_core: Fix error handling when initializing CQ bufs in the driver net/mlx4_core: Add masking for a few queries on HCA caps sctp: set flow sport from saddr only when it's 0 sctp: set chunk transport correctly when it's a new asoc sctp: improve the events for sctp stream adding sctp: improve the events for sctp stream reset ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel ax25: fix possible use-after-free sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe hv_netvsc: fix typos in code comments ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 05:54:40 +0000