summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-03-15drm/i915: Record platform specific ppGTT size in intel_device_infoChris Wilson6-17/+22
As the maximum addressable bits is determined by platform, record that information in our static chipset tables. This has the advantage of being clearly recorded in our capability dumps for dmesg, debugfs and error states. Based on a patch by Bob Paauwe. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-2-chris@chris-wilson.co.uk
2019-03-15drm/i915: Mark up vGPU support for full-ppgttChris Wilson5-6/+6
For compatibility reasons, we only care if the vGPU host provides support for full-ppgtt. This is independent of the addressable memory size, so remove the conflation of 48b from the capability name. Based on a patch by Bob Paauwe. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-1-chris@chris-wilson.co.uk
2019-03-14drm/i915: Also use new comparative stuff for more ICP+ stuffRodrigo Vivi2-5/+5
I just noticed that initial PCH comparative patch left some >= PCH_ICP cases behind. Let's also cover these cases and leave only the pin map behind now. No functional change. Hence no fixes tag. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190313214307.26573-1-rodrigo.vivi@intel.com
2019-03-14drm/i915: Refactor to common helpers for prepare/finish between reset & wedgeChris Wilson1-9/+11
Since both GPU reset and declaring the device wedged suspend ongoing driver activity around a hard reset, we can reuse the same code to reduce the likelihood of forgetting details surrounding reset from either path. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190314084432.3740-1-chris@chris-wilson.co.uk
2019-03-14drm/i915/selftests: Disable preemption while setting up fence-timersChris Wilson1-1/+8
The impossible happens and a future fence expired while we were still initialising. The probable cause is that the test was preempted and we lost our scheduler cpu slice. Disable preemption during this test to rule out preemption as a source of timer disruption. References: https://bugs.freedesktop.org/show_bug.cgi?id=110039 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190313205944.5768-1-chris@chris-wilson.co.uk
2019-03-14drm/i915/guc: Preparing for GuC reset along with engine resetSujaritha Sundaresan1-0/+2
Adding the call to prepare for guc reset along with engine reset. intel_uc_reset_prepare() calls to disable guc communication and to sanitize. Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190307184445.25895-1-sujaritha.sundaresan@intel.com
2019-03-13drm/i915/icl+: Always use TPS2 or TPS3 when exiting PSR1José Roberto de Souza2-0/+4
When any other value than EDP_PSR_TP4_TIME_0US is set, TPS1 and TPS4 will be used to do the link training when exiting PSR1. Happily the eDP panels tested so far was able to sync with source even without HBR3/TPS4 support but let use the right training pattern. TPS4 support was added to PSR1 registers because HBR3/PSR specification was not closed when ICL was freezed so if HBR3 was supported by PSR, ICL would already be ready but it was not added to specification so lets always disable TPS4. v3: Missed ";" SPANK SPANK SPANK!!! BSpec: 17524 Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190312195743.8829-3-jose.souza@intel.com
2019-03-13drm/i915/psr: Move logic to get TPS registers values to another functionJosé Roberto de Souza1-24/+33
This will make hsw_activate_psr1() more easy to read and will make future modification to TPS registers more easy to review and read. v4: Rename new function to intel_psr1_get_tp_time() (Dhinakaran and Rodrigo) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190312195743.8829-2-jose.souza@intel.com
2019-03-13drm/i915/vbt: Parse and use the new field with PSR2 TP2/3 wakeup timeJosé Roberto de Souza4-4/+33
A new field with the training pattern(TP) wakeup time for PSR2 was added to VBT, so lets use it when available otherwise it will fallback to PSR1 wakeup time. v2: replacing enum to numerical usec time (Jani) BSpec: 20131 Cc: Jani Nikula <jani.nikula@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190312195743.8829-1-jose.souza@intel.com
2019-03-13drm/i915: Start using comparative INTEL_PCH_TYPERodrigo Vivi5-11/+12
In order to make it easier to bring up new platforms without having to take care about all corner cases that was previously taken care for previous platforms we already use comparative INTEL_GEN statements. Let's start doing the same with PCH. The only caveats are: - less-than comparisons need to be avoided or done with attention and check > PCH_NONE as well. - It is not necessarily a chronological order, but a matter of south display compatibility/inheritance. v2: Rebased on top of Jani's clean-up which removed the need for less-than comparison Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308214300.25057-3-rodrigo.vivi@intel.com
2019-03-13drm/i915: Move PCH_NOP to -1Rodrigo Vivi1-1/+1
So we can later use PCH >= comparisons. The ultimate goal is to make it easier for us to introduce a new platform with south display engine on PCH just by reusing the previous one. Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308214300.25057-2-rodrigo.vivi@intel.com
2019-03-13drm/i915/gen11+: First assume next platforms will inherit stuffRodrigo Vivi11-33/+33
This exactly same approach was already used from gen9 to gen10 and from gen10 to gen11. Let's also use it for gen11+. Let's first assume that we inherit a similar platform and than we apply the differences on top. Different from the previous attempts this will be done this time with coccinelle. We obviously need to exclude some case that is really exclusive for gen11 like PCH, Firmware, and few others. Luckly this was easy to filter by selecting the files we are touching with coccinelle as exposed below: spatch -sp_file gen11\+.cocci --in-place i915_perf.c \ intel_bios.c intel_cdclk.c intel_ddi.c \ intel_device_info.c intel_display.c intel_dpll_mgr.c \ intel_dsi_vbt.c intel_hdmi.c intel_mocs.c intel_color.c @noticelake@ expression e; @@ -!IS_ICELAKE(e) +INTEL_GEN(e) < 11 @notgen11@ expression e; @@ -!IS_GEN(e, 11) +INTEL_GEN(e) < 11 @icelake@ expression e; @@ -IS_ICELAKE(e) +INTEL_GEN(e) >= 11 @gen11@ expression e; @@ -IS_GEN(e, 11) +INTEL_GEN(e) >= 11 No functional change. v2: Remove intel_lrc.c per Tvrtko request since those were w/a for ICL hw issuea and media related configuration. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308214300.25057-1-rodrigo.vivi@intel.com
2019-03-13drm/i915/bios: assume eDP is present on port A when there is no VBTThomas Preston1-0/+1
We rely on VBT DDI port info for eDP detection on GEN9 platforms and above. This breaks GEN9 platforms which don't have VBT because port A eDP now defaults to false. Fix this by defaulting to true when VBT is missing. Fixes: a98d9c1d7e9b ("drm/i915/ddi: Rely on VBT DDI port info for eDP detection") Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190306200618.17405-1-thomas.preston@codethink.co.uk
2019-03-12drm/i915: Add new ICL PCI IDJosé Roberto de Souza1-1/+2
A new PCI ID for ICL was added to BSpec, lets keep it in tight sync as ICL is not protected by the alpha support flag anymore. v2: Keeping BSpec order(Rodrigo) BSepc: 21141 Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308215646.30436-1-jose.souza@intel.com
2019-03-12drm/i915/selftests: Improve error detection of reset failureChris Wilson1-1/+17
Use a timedwait to promptly detect if the recovery after reset fails and provide a meaningful debug dump. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190312111146.10662-2-chris@chris-wilson.co.uk
2019-03-12drm/i915: Consolidate reset-request debug messageChris Wilson3-3/+6
Move the pair of messages to the common callsite where it makes sense to include a bit more information about which request is being reset. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190312111146.10662-1-chris@chris-wilson.co.uk
2019-03-11Merge tag 'topic/hdr-formats-2019-03-07' of ↵Joonas Lahtinen8-19/+194
git://anongit.freedesktop.org/drm/drm-misc into drm-intel-next-queued Add support for Y21x and Y41x to drm core and i915, and P01x support to i915. Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f2485309-d645-bed4-95f4-e66ff312aa05@linux.intel.com
2019-03-11Merge drm/drm-next into drm-intel-next-queuedJoonas Lahtinen382-2180/+3354
To facilitate merging topic/hdr-formats from Maarten. Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-03-11drm/i915/icl: Fix CRC mismatch error for DP link layer complianceAditya Swarup2-7/+14
Setting the pixel rounding bit to 1 in PIPE_CHICKEN register allows to passthrough FB pixels unmodified across pipe. This fixes the failures for DP link layer compliance tests 4.4.1.1, 4.4.1.2 & 4.4.1.3. (Lineage #1605353570) v2: This is also needed to fix failing IGT test case kms_cursor_crc on ICL.(Mika Kahola) Make macros consistent with i915_reg.h comments.(Jani Nikula) Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Aditya Swarup <aditya.swarup@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190307021412.18626-1-aditya.swarup@intel.com References: https://bugs.freedesktop.org/show_bug.cgi?id=103232
2019-03-11drm/i915: Update DRIVER_DATE to 20190311Joonas Lahtinen1-2/+2
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-03-09drm/i915: Introduce a context barrier callbackChris Wilson2-0/+180
In the next patch, we will want to update live state within a context. As this state may be in use by the GPU and we haven't been explicitly tracking its activity, we instead attach it to a request we send down the context setup with its new state and on retiring that request cleanup the old state as we then know that it is no longer live. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190309160250.29324-1-chris@chris-wilson.co.uk
2019-03-08drm/i915: Suppress the "Failed to idle" warning for gem_eioChris Wilson1-3/+6
It is debatable whether having an error message on suspend for forcibly cancelling outstanding work is worthwhile. We want to know if it occurs in the wild (as we will then have to reconsider the approach!), but equally is not fatal across suspend, as upon resume we automatically clear the wedged status. However, CI does trigger this scenario with gem_eio/suspend; as there we are intentionally wedging the device upon suspend. The dilemma is how not to trigger a failure report for the dmesg spam, for which the quickest response is to suppress the warning in the kernel. I'd rather mark it as accepted in gem_eio, but for now detecting when gem_eio is playing games and cancelling the warning for that case seems a barely acceptable hack. Testcase: igt/gem_eio/suspend Reference: 5861b013e2c7 ("drm/i915: Do a synchronous switch-to-kernel-context on idling") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308134512.19115-1-chris@chris-wilson.co.uk
2019-03-08drm/i915: Enable PSR2 by defaultJosé Roberto de Souza1-3/+0
The support for PSR2 was polished, IGT tests for PSR2 was added and it was tested performing regular user workloads like browsing, editing documents and compiling Linux, so it is time to enable it by default and enjoy even more power-savings. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-9-jose.souza@intel.com
2019-03-08drm/i915: Force PSR1 exit when getting pipe CRCJosé Roberto de Souza1-13/+23
If PSR1 is active when pipe CRC is enabled the CRC calculations will be inhibit by the transition to low power states that PSR1 brings. So lets force a PSR1 exit and as soon as pipe CRC is enabled it will block PSR1 activation and avoid CRC timeouts when running IGT tests. There is a little window between the call to force exit PSR and the write to pipe CRC registers that needs to happen within the minimum of 6 idles frames otherwise PSR1 will be active again causing the CRC timeouts but anyways this will at least reduce the occurrence of CRC timeouts. This can possibily fix issues present right now but I did not found any open, I mostly got this issue from previous CI runs of this series, bellow some exambles: * igt@kms_color@pipe-b-ctm-0-75: - shard-apl: PASS -> FAIL +9 * igt@kms_cursor_legacy@flip-vs-cursor-busy-crc-legacy: - shard-apl: PASS -> DMESG-FAIL +17 * igt@kms_frontbuffer_tracking@fbc-1p-primscrn-indfb-pgflip-blt: - shard-kbl: PASS -> DMESG-FAIL +12 * igt@kms_pipe_crc_basic@read-crc-pipe-c: - shard-kbl: PASS -> FAIL +7 v6: s/PSR/PSR1 (Dhinakaran) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-8-jose.souza@intel.com
2019-03-08drm/i915: Drop redundant checks to update PSR stateJosé Roberto de Souza1-8/+4
All of this checks are redudant and can be removed as the if bellow already takes care when there is no changes in the state. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-7-jose.souza@intel.com
2019-03-08drm/i915: Disable PSR2 while getting pipe CRCJosé Roberto de Souza2-0/+6
When PSR2 is active aka after the number of frames programmed in PSR2_CTL 'Frames Before SU Entry' hardware stops to generate CRC interrupts causing IGT tests to fail due timeout. This same behavior don't happen with PSR1, as soon as pipe CRC is enabled it blocks PSR1 activation so CRC calculation continues to happens normaly. This patch also set mode_changed as true when PSR is available to force atomic check functions to compute new PSR state, otherwise PSR2 would not be disabled. v4: Only setting mode_changed if has_psr is set(Dhinakaran) v3: Reusing intel_crtc_crc_prepare() and crc_enabled, only setting mode_changed if it can do PSR. v2: Changed commit description to describe that PSR2 inhibit CRC calculations. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-6-jose.souza@intel.com
2019-03-08drm/i915/crc: Make IPS workaround genericJosé Roberto de Souza3-33/+30
Other features like PSR2 also needs to be disabled while getting CRC so lets rename ips_force_disable to crc_enabled, drop all this checks for pipe A and HSW and BDW and make it generic and hsw_compute_ips_config() will take care of all the checks removed from here. v2: Renaming and parameter changes to the functions that prepares the commit (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-5-jose.souza@intel.com
2019-03-08drm/i915/psr: Drop test for EDP in CRTC when forcing commitJosé Roberto de Souza1-3/+1
If has_psr is set it means that CRTC has a EDP panel attached so the EDP check is redundant and can be dropped. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-4-jose.souza@intel.com
2019-03-08drm/i915: Compute and commit color features in fastsetsJosé Roberto de Souza1-1/+2
In any commit, intel_modeset_pipe_config() will initialilly clear and then recalculate most of the pipe states but it leave intel specific color features states in reset state. If after intel_pipe_config_compare() is detected that a fastset is possible it will mark update_pipe as true and unsed mode_changed, causing the color features state to be kept in reset state and then latter being committed to hardware disabling the color features. This issue can be reproduced by any code patch that duplicates the actual(with color features already enabled) state and only mark mode_changed as true. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-3-jose.souza@intel.com
2019-03-08drm/i915/psr: Only lookup for enabled CRTCs when forcing a fastsetJosé Roberto de Souza1-1/+2
Forcing a specific CRTC to the eDP connector was causing the intel_psr_fastset_force() to mark mode_chaged in the wrong and disabled CRTC causing no update in the PSR state. Looks like our internal state track do not clear output_types and has_psr in the disabled CRTCs, not sure if this is the expected behavior or not but in the mean time this fix the issue. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-2-jose.souza@intel.com
2019-03-08drm/i915/psr: Remove PSR2 FIXMEJosé Roberto de Souza1-5/+0
Now we are checking sink capabilities when probing PSR DPCD register and then dynamically checking in if new state is compatible with PSR in, so this FIXME can be dropped. Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-1-jose.souza@intel.com
2019-03-08drm/i915: Introduce intel_context.pin_mutex for pin managementChris Wilson8-56/+104
Introduce a mutex to start locking the HW contexts independently of struct_mutex, with a view to reducing the coarse struct_mutex. The intel_context.pin_mutex is used to guard the transition to and from being pinned on the gpu, and so is required before starting to build any request. The intel_context will then remain pinned until the request completes, but the mutex can be released immediately unpin completion of pinning the context. A slight variant of the above is used by per-context sseu that wants to inspect the pinned status of the context, and requires that it remains stable (either !pinned or pinned) across its operation. By using the pin_mutex to serialise operations while pin_count==0, we can take that pin_mutex for stabilise the boolean pin status. v2: for Tvrtko! * Improved commit message. * Dropped _gpu suffix from gen8_modify_rpcs_gpu. v3: Repair the locking for sseu selftests Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-7-chris@chris-wilson.co.uk
2019-03-08drm/i915: Track the pinned kernel contexts on each engineChris Wilson6-52/+45
Each engine acquires a pin on the kernel contexts (normal and preempt) so that the logical state is always available on demand. Keep track of each engines pin by storing the returned pointer on the engine for quick access. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-6-chris@chris-wilson.co.uk
2019-03-08drm/i915: Make context pinning part of intel_context_opsChris Wilson7-134/+95
Push the intel_context pin callback down from intel_engine_cs onto the context itself by virtue of having a central caller for intel_context_pin() being able to lookup the intel_context itself. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-5-chris@chris-wilson.co.uk
2019-03-08drm/i915: Move over to intel_context_lookup()Chris Wilson21-96/+310
In preparation for an ever growing number of engines and so ever increasing static array of HW contexts within the GEM context, move the array over to an rbtree, allocated upon first use. Unfortunately, this imposes an rbtree lookup at a few frequent callsites, but we should be able to mitigate those by moving over to using the HW context as our primary type and so only incur the lookup on the boundary with the user GEM context and engines. v2: Check for no HW context in guc_stage_desc_init Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-4-chris@chris-wilson.co.uk
2019-03-08drm/i915: Store the intel_context_ops in the intel_engine_csChris Wilson5-26/+24
If we place a pointer to the engine specific intel_context_ops in the engine itself, we can assign the ops pointer on initialising the context, and then rely on it being set. This simplifies the code in later patches. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-3-chris@chris-wilson.co.uk
2019-03-08drm/i915: Split struct intel_context definition to its own headerChris Wilson18-817/+974
This complex struct pulling in half the driver deserves its own isolation in preparation for intel_context becoming an outright complicated class of its own. In order to split this beast into its own header also requests splitting several of its dependent types and their dependencies into their own headers as well. v2: Add standalone compilation tests Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-2-chris@chris-wilson.co.uk
2019-03-08drm/i915: Track active engines within a contextChris Wilson7-29/+43
For use in the next patch, if we track which engines have been used by the HW, we can reduce the work required to flush our state off the HW to those engines. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-1-chris@chris-wilson.co.uk
2019-03-08drm/i915/dp: use single point of truth for PPS divisor registerJani Nikula1-34/+39
Set pp_div field of struct pps_registers to INVALID_MMIO_REG when the register isn't there, and use i915_mmio_reg_valid() instead of repeating the condition all over the place. Use INVALID_MMIO_REG explicitly for documentation purposes, even if the value is unchanged from 0. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190305135215.29862-2-jani.nikula@intel.com
2019-03-08drm/i915/dp: deconflate PPS unlock from divisor registerJani Nikula1-3/+4
PPS locking is a thing on pre-DDI, up to and including CPT and PPT. The PPS divisor register exists up to gen 9 BC, replaced by a field in the control register starting from gen 9 LP, i.e. BXT, GLK, and CNP on. Commit b0a08bec9631 ("drm/i915/bxt: eDP Panel Power sequencing") stopped using the divisor register, but inadvertently conflated the PPS unlock in the change. No longer doing the unlocking was the right thing to do, however we should've stopped already at LPT (or DDI platforms). Deconflate the two. Arguably this could be moved away from here altogether, but this is the minimally intrusive change for now. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190305135215.29862-1-jani.nikula@intel.com
2019-03-08drm/i915: Remove has-kernel-contextChris Wilson5-78/+4
We can no longer assume execution ordering, and in particular we cannot assume which context will execute last. One side-effect of this is that we cannot determine if the kernel-context is resident on the GPU, so remove the routines that claimed to do so. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308093657.8640-4-chris@chris-wilson.co.uk
2019-03-08drm/i915: Reduce presumption of request ordering for barriersChris Wilson10-72/+27
Currently we assume that we know the order in which requests run and so can determine if we need to reissue a switch-to-kernel-context prior to idling. That assumption does not hold for the future, so instead of tracking which barriers have been used, simply determine if we have ever switched away from the kernel context by using the engine and before idling ensure that all engines that have been used since the last idle are synchronously switched back to the kernel context for safety (and else of shrinking memory while idle). v2: Use intel_engine_mask_t and ALL_ENGINES Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308093657.8640-3-chris@chris-wilson.co.uk
2019-03-08drm/i915: Refactor common code to load initial power contextChris Wilson1-24/+24
We load a context (the kernel context) on both module load and resume in order to initialise some logical state onto the GPU. We can use the same routine for both operations, which will become more useful as we refactor rc6/rps enabling. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308093657.8640-2-chris@chris-wilson.co.uk
2019-03-08drm/i915: Do a synchronous switch-to-kernel-context on idlingChris Wilson5-110/+73
When the system idles, we switch to the kernel context as a defensive measure (no users are harmed if the kernel context is lost). Currently, we issue a switch to kernel context and then come back later to see if the kernel context is still current and the system is idle. However, if we are no longer privy to the runqueue ordering, then we have to relax our assumptions about the logical state of the GPU and the only way to ensure that the kernel context is currently loaded is by issuing a request to run after all others, and wait for it to complete all while preventing anyone else from issuing their own requests. v2: Pull wedging into switch_to_kernel_context_sync() but only after waiting (though only for the same short delay) for the active context to finish. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308093657.8640-1-chris@chris-wilson.co.uk
2019-03-08drm/i915/selftests: Check preemption support on each engineChris Wilson1-0/+18
Check that we have setup on preemption for the engine before testing, instead warn if it is not enabled on supported HW. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190306142517.22558-28-chris@chris-wilson.co.uk
2019-03-08drm/i915/icl: Prevent incorrect DBuf enablingImre Deak2-3/+16
Pretend that we have only 1 DBuf slice and that 1 slice is always enabled, until we have a proper way for on-demand toggling of the second slice. Currently we'll try to incorrectly enable DBuf even when all pipes are disabled and we are already runtime suspended (as the computed number of DBuf slices will be 1 in that case). This also means we'll leave the second slice enabled redundantly (except when suspended), but that's an acceptable tradeoff until we have a proper solution. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108756 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190307103235.23538-1-imre.deak@intel.com
2019-03-07drm/i915/selftests: Improve switch-to-kernel-context checkingChris Wilson1-45/+35
We can reduce the switch-to-kernel-context selftest to operate as a loop and so trivially test another state transition (that of idle->busy). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190307211947.6954-1-chris@chris-wilson.co.uk
2019-03-07drm/i915: Read out memory typeVille Syrjälä3-4/+100
We'll need to know the memory type in the system for some bandwidth limitations and whatnot. Let's read that out on gen9+. v2: Rebase v3: Fix the copy paste fail in the BXT bit definitions (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-13-ville.syrjala@linux.intel.com
2019-03-07drm/i915: Extract DIMM info on cnl+Ville Syrjälä2-15/+68
We'll need information about the memory configuration on cnl+ too. Extend the code to parse the slightly changed register layout. v2: Document what cnl_get_dimm_size() returns (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-12-ville.syrjala@linux.intel.com
2019-03-07drm/i915: Clean up intel_get_dram_info() a bitVille Syrjälä1-12/+4
Remove the pointless zero initialization of bunch of things (the thing is kzalloc()ed). Also throw out the mostly useless on-stack string. I think it'll be clear enough from the logs that 0 means unknown. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-11-ville.syrjala@linux.intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-26 16:04:25 +0000