summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-09-19ALSA: usb-audio: Avoid unnecessary EP setups in prepareTakashi Iwai3-3/+10
The recent fix for USB suspend breakage moved the code to set up EP from hw_params to prepare, but it means also the EP setup might be called multiple times unnecessarily because the prepare callback can be called multiple times without starting the stream (e.g. OSS emulation). This patch adds a new flag to struct snd_usb_substream indicating whether the setup of EP is required, and do it only when necessary, i.e. right after hw_params or suspend. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-19ALSA: usb-audio: Move configuration to prepare.Dylan Reid2-60/+76
Move interface and endpoint configuration from hw_params to prepare callback. During system suspend/resume when the USB device power isn't cycled the interface and endpoint configuration need to be set before audio playback can continue. Resume involves another call to prepare but not to hw_params, moving it here allows a playing stream to continue after resume. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-19ALSA: usb-audio: Don't require hw_params in endpoint.Dylan Reid3-17/+35
Change the interface to configure an endpoint so that it doesn't require a hw_params struct. This will allow it to be called from prepare instead of hw_params, configuring it after system resume. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-19ALSA: usb-audio: set period_bytes in substream.Dylan Reid1-0/+2
Set the peiod_bytes member of snd_usb_substream. It was no longer being set, but will be needed to resume properly in a future commit. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-18ALSA: hda - limit internal mic boost for Asus X202EDavid Henningsson1-0/+29
When the input gain for the internal mic is set to its maximum level, the background noise becomes so high - and any relevant signal clipped - that the setting becomes unusable. It is better to limit the amplification. BugLink: https://bugs.launchpad.net/bugs/1052460 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Cc: <stable@vger.kernel.org> [v3.5+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-17ALSA: hda - Add another pci id for Haswell boardWang Xingchao1-0/+3
A new PCI id 0x0d0c for Haswell HDA Controller. [root@SKBM04SDP ~]# lspci |grep Audio 00:03.0 Audio device: Intel Corporation Device 0d0c (rev 02) 00:1b.0 Audio device: Intel Corporation Lynx Point HD Audio Controller Signed-off-by: Wang Xingchao <xingchao.wang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-17ALSA: Compress - add codec parameter checksVinod Koul2-0/+11
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-17ALSA: compress - move the buffer checkVinod Koul1-4/+16
Commit ALSA: compress_core: integer overflow in snd_compr_allocate_buffer() added a new error check for input params. this add new routine for input checks and moves buffer overflow check to this new routine. This allows the error value to be propogated to user space Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-15Merge branch 'topic/tlv-chmap' into for-nextTakashi Iwai22-36/+1091
This is a merge of a topic branch containing the support for the new channel map API using control elements.
2012-09-14ALSA: hda - Add mic-mute LED control for HP laptopTakashi Iwai1-10/+74
Some of new HP laptops have a LED for microphone (or recording) mute, and it's controlled by GPIO pin 3. Bind this with the capture switch to turn it on/off properly by the mixer change. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-14ALSA: compress_core: integer overflow in snd_compr_allocate_buffer()Dan Carpenter1-0/+4
These are 32 bit values that come from the user, we need to check for integer overflows or we could end up allocating a smaller buffer than expected. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-13ALSA: hda - Allow to pass position_fix=0 explicitlyTakashi Iwai2-4/+11
Set the default value of position_fix -1, and allow user passing position_fix=0 explicitly to set the "auto" position-fix mode. Otherwise the auto mode may be switched to others like COMBO of VIACOMBO when the controller prefers it, thus user can't set the auto mode any longer. Also updated the documentation appropriately, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-13ALSA: Fix leftover chmap UNKNOWN -> MONO conversionsTakashi Iwai3-4/+4
A few files have been slipped from the previous commit to add MONO channel type. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-13ALSA: hda - Fix disordered enum definitions in patch_cirrus.cTakashi Iwai1-2/+3
Due to the definitions of CS420X_IMAC27_122 and CS420X_APPLE as aliases, the rest enums are set to duplicated values unexpectedly. Move the alias definitions at the end so that the enum values are defined in the proper order. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-12ALSA: Define more channel map positionsTakashi Iwai3-9/+23
For following the standard, define more channel map positions and shuffle the items a bit: - As both PulseAudio and gstreamer define MONO channel position explicitly, we should follow that, too. The mono streams point to this channel position unless they are explicitly assigned to certain channel positions. - Top-front-* and Top-rear-* positions are added, carried from PulseAudio's definitions. - Move NA and MONO definitions at the top of table right after UNKNOWN, since these are more abstract in comparison with other practical positions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-12ALSA: ymfpci: Define channel mapsTakashi Iwai1-0/+18
Provide channel maps for individual stereo streams of YMFPCI. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-12ALSA: ens1370: Define channel mapsTakashi Iwai1-0/+28
Provide channel maps for individual stereo streams of ENS1370 and ENS1371. Note that the configuration of ENS1370 uses the secondary PCM as the front unlike ENS1371. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-12ALSA: emu10k1x: Define channel mapsTakashi Iwai1-0/+21
Provide channel maps for individual stereo streams of emu10k1x. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-12ALSA: ca0106: Define channel mapsTakashi Iwai1-0/+28
Provide channel maps for individual stereo streams of CA0106. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-12ALSA: ens1370: Reduce ifdefsTakashi Iwai1-30/+8
... just by defining CHIP_NAME and string concats. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-12ALSA: ctxfi: Fix mono channel map to UNKNOWNTakashi Iwai1-3/+3
To follow the previous commit. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-11ALSA: hda - Add support for MacBook Pro 10,1Takashi Iwai1-0/+31
MacBook Pro 10,1 needs a few adjustments to make it working: - more COEF verbs - some pin config overrides to disable the unused pin (0x0d, 0x12), and fix the internal mic (0x0e) In addition, it uses GPIO 1 and 3 like other MacBooks. The internal digital mic on the machine is still problematic: it seems that only the right channel is used and the left is always static. This looks like a hardware design, so we need to cope in the software side somehow... The primary information and test were brought from Daniel J Blueman. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-11Merge branch 'for-linus' into for-nextTakashi Iwai8-36/+78
To merge HD-audio fixes back to 3.7 development line
2012-09-11ALSA: hda - Replace with the generic fixup codes in patch_cirrus.cTakashi Iwai1-90/+103
... to make easier to integrate into the common generic parser in near future. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-11ALSA: hda - Check bit mask for codec SSID in snd_hda_pick_fixup()Takashi Iwai1-1/+2
snd_hda_pick_fixup() didn't check the case where the device mask bits are set, typically used for SND_PCI_QUIRK_VENDOR() entries. Fix this. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-11ALSA: hda - Avoid BDL position workaround when no_period_wakeup is setTakashi Iwai1-5/+7
Originally the bogus period at BDL head was introduced as a workaround for the mismatching position update at the period boundary, typically seen on dmix. However, for applications like PulseAudio that don't require period wake ups, this workaround is just superfluous. Thus better to disable it when no_period_wakeup is given in hw_params. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-11ALSA: hda_intel: add position_fix quirk for Asus K53ECatalin Iacob1-0/+1
Commit c20c5a841cbe47f5b7812b57bd25397497e5fbc0 changed some chipsets to default to POS_FIX_COMBO so they now use POS_FIX_LPIB instead of POS_FIX_POSBUF. Since then I've been getting artifacts on playback, including repeated sounds on my Asus laptop. My hardware is Cougar Point which the commit log of c20c5a841cbe47f5b7812b57bd25397497e5fbc0 mentions as tested so POS_FIX_COMBO probably works in general but apparently it doesn't on Asus K53E therefore the need for the quirk. Signed-off-by: Catalin Iacob <iacobcatalin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-11ALSA: compress_core: fix open flags test in snd_compr_open()Dan Carpenter1-5/+3
O_RDONLY is zero so the original test (f->f_flags & O_RDONLY) is always false and it will never do compress capture. The test for O_WRONLY is also slightly off. The original test would consider "->flags = (O_WRONLY | O_RDWR)" as write only instead of rejecting it as invalid. I've also removed the pr_err() because that could flood dmesg. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-11ALSA: pcm - Use UNKNOWN chmap for mono streamsTakashi Iwai1-2/+2
In general, mono streams have no dedicated speaker assignment, thus they should be rather marked as UNKNOWN position. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-10ALSA: hda - Allow 3/5/7 channel map for HDMI/DPTakashi Iwai1-1/+1
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-10ALSA: hda - Fix Oops at codec reset/reconfigTakashi Iwai1-1/+1
snd_hda_codec_reset() calls restore_pincfgs() where the codec is powered up again, which eventually tries to resume and initialize via the callbacks of the codec. However, it's the place just after codec free callback, thus no codec callbacks should be called after that. On a codec like CS4206, it results in Oops due to the access in init callback. This patch fixes the issue by clearing the codec callbacks properly after freeing codec. Reported-by: Daniel J Blueman <daniel@quora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-07ALSA: hda - Remove ignore_misc_bitDavid Henningsson3-8/+2
The purpose of this flag is unclear. If the problem is that some machines have broken misc/NO_PRESENCE bits, they should be fixed by pin fixups. In addition, this causes jack detection functionality to be flawed on the M31EI, where there are two jacks without jack detection (which is properly marked as NO_PRESENCE), but due to ignore_misc_bit, these jacks are instead being reported as being present but always unplugged. BugLink: https://bugs.launchpad.net/bugs/939161 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: Follow channel position definitions to alsa-lib mixerTakashi Iwai2-14/+18
There is already a set of channel position definitions in alsa-lib mixer.h, and it'd be more practical to keep the same order for the PCM channel map, too. The value is shifted with 1 to keep zero for UNKNOWN. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: Remove VOLATILE flag from chmap ctlsTakashi Iwai1-1/+0
The VOLATILE flag was added to control elements by snd_pcm_add_chmap_ctls() just because I didn't want to have a side-effect of "alsactl restore". But now the set operation doesn't allow to change the value unless the PCM stream is in PREAPRED state, there is no reason to keep this flag. Let's rip it off. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: ctxfi: Implement channel mapsTakashi Iwai1-0/+50
Assign the multi-channel map to front PCM, and other channel map to each other channel PCM. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: cmipci: Implement channel mappingTakashi Iwai1-0/+6
Simply enable the channel map according to the h/w capability. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: Implement channel maps for standard onboard AC97 driversTakashi Iwai4-0/+59
Just set the channel maps depending on the hardware availability. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: ac97: Implement channel map workaround for ALC650Takashi Iwai2-1/+26
ALC650 has a channel swap option between surround and CLFE channels, so we need to tweak the channel maps dynamically depending on the register bit. Now struct snd_ac97 can contain chmap pointers for playback and capture. The driver may store these and let ac97 driver changing the channel mapping dynamically. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: hda - Fix channel maps for Nvidia 7x 8ch HDMI codecsTakashi Iwai1-0/+39
Some old Nvidia HDMI codecs with 8ch support only 2/8 or 2/6/8 channels and with the fixed CLFE-first map. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: hda - Provide the proper channel mapping for generic HDMI driverTakashi Iwai1-5/+303
... instead of the standard fixed channel maps. The generic HDMI is based on the audio infoframe, and its configuration can be selected via CA bits. Thus we need a translation between the CA index and the verbose channel map list. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: hda - Add standard channel mapsTakashi Iwai3-0/+39
Although HD-audio allows pair-wise channel configurations, only the fixed channel positions are used in this version. In future, this can be changed and allow user to modify the channel positions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: Add a documentation for channel mapping APITakashi Iwai1-0/+144
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: control: Fix missing VOLATILE flag at creating controlsTakashi Iwai1-0/+1
The SNDRV_CTL_ELEM_ACCESS_VOLATILE bit flag wasn't properly inherited at creating control elements via snd_ctl_new1(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: PCM: channel mapping API implementationTakashi Iwai5-0/+305
This patch implements the basic data types for the standard channel mapping API handling. - The definitions of the channel positions and the new TLV types are added in sound/asound.h and sound/tlv.h, so that they can be referred from user-space. - Introduced a new helper function snd_pcm_add_chmap_ctls() to create control elements representing the channel maps for each PCM (sub)stream. - Some standard pre-defined channel maps are provided for convenience. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: hda - Move non-PCM check to per_pin in patch_hdmi.cTakashi Iwai1-21/+25
Recently the check for non-PCM stream state was added to the generic HDMI driver code. But this check should be done rather to each pin instead of each converter. Otherwise when a different converter is assigned at the next open, the audio infoframe can be inconsistent with the setup using the previous converter. For fixing this issue, this patch moves the state of the current non-PCM status from per_cvt to per_pin. (In addition an unused argument cvt_nid is stripped from hdmi_setup_channel_mapping()) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: usb-audio: Fix bogus error messages for delay accountingTakashi Iwai1-0/+6
The recent fix for the missing fine delayed time adjustment gives strange error messages at each start of the playback stream, such as delay: estimated 0, actual 352 delay: estimated 353, actual 705 These come from the sanity check in retire_playback_urb(). Before the stream is activated via start_endpoints(), a few silent packets have been already sent. And at this point the delay account is still in the state as if the new packets are just queued, so the driver gets confused and spews the bogus error messages. For fixing the issue, we just need to check whether the received packet is valid, whether it's zero sized or not. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: <stable@vger.kernel.org> [v3.5+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: hda - fix control names for multiple speaker out on IDT/STACDavid Henningsson1-3/+6
For multiple speaker outs, the names were previously "Speaker,0", "Speaker,1", "Center"/"LFE", "Speaker,3". This is inconsistent, confusing, and is not picked up correctly by PulseAudio. Instead use "Front", "Surround", "Center"/"LFE", "Side" which is more standard. BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1046734 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: hda - Fix missing Master volume for STAC9200/925xTakashi Iwai1-1/+1
With the commit [2faa3bf: ALSA: hda - Rewrite the mute-LED hook with vmaster hook in patch_sigmatel.c], the former Master volume control was converted to PCM. This was supposed to be covered by the vmaster control. But due to the lack of "PCM" slave definition, this didn't happen properly. The patch fixes the missing entry. Reported-by: Andrew Shadura <bugzilla@tut.by> Cc: <stable@vger.kernel.org> [v3.4+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: HDMI - Setup channel mapping for non_pcm audioWang Xingchao1-0/+5
For HBR stream test, use straight channel mapping way. when switched back to "speaker-test -c8", even the audio infoframe is up-to-date, there should be correct channel mapping setup. Signed-off-by: Wang Xingchao <xingchao.wang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: HDMI - Enable HBR feature on Intel chipsWang Xingchao1-4/+32
HDMI channel remapping apparently effects HBR packets on Intel's chips. For compressed non-PCM audio, use "straight-through" channel mapping. For uncompressed multi-channel pcm audio, use normal channel mapping. Signed-off-by: Wang Xingchao <xingchao.wang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-26 10:44:59 +0000