summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2015-08-10crypto: talitos - Prevent panic in probe error pathAaron Sierra2-2/+12
The probe error path for this driver, for all intents and purposes, is the talitos_remove() function due to the common "goto err_out". Without this patch applied, talitos_remove() will panic under these two conditions: 1. If the RNG device hasn't been registered via talitos_register_rng() prior to entry into talitos_remove(), then the attempt to unregister the RNG "device" will cause a panic. 2. If the priv->chan array has not been allocated prior to entry into talitos_remove(), then the per-channel FIFO cleanup will panic because of the dereference of that NULL "array". Both of the above scenarios occur if talitos_probe_irq() fails. This patch resolves issue #1 by introducing a boolean to mask the hwrng_unregister() call in talitos_unregister_rng() if RNG device registration was unsuccessful. It resolves issue #2 by checking that priv->chan is not NULL in the per-channel FIFO cleanup for loop. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10ARM: imx_v6_v7_defconfig: Select CAAMVictoria Milhoan1-2/+1
Select CAAM for i.MX6 devices. Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10crypto: caam - Detect hardware features during algorithm registrationVictoria Milhoan4-18/+110
Register only algorithms supported by CAAM hardware, using the CHA version and instantiation registers to identify hardware capabilities. Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10crypto: caam - Enable MXC devices to select CAAM driver in KconfigSteve Cornelius1-1/+1
Allow CAAM to be selected in the kernel for Freescale i.MX devices if ARCH_MXC is enabled. Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com> Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10ARM: dts: mx6sx: Add CAAM device nodeVictoria Milhoan1-0/+27
Add CAAM device node to the i.MX6SX device tree. Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10ARM: dts: mx6qdl: Add CAAM device nodeVictoria Milhoan1-4/+25
Add CAAM device node to the i.MX6 device tree. Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10ARM: clk-imx6q: Add CAAM clock supportVictoria Milhoan2-1/+7
Add CAAM clock support to the i.MX6 clocking infrastructure. Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10crypto: caam - Added clocks and clock-names properties to SEC4.0 device tree ↵Victoria Milhoan1-0/+17
binding The clocks and clock-names properties describe input clocks that may be required for enablement of CAAM. Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10crypto: caam - Use local sg pointers to walk the scatterlistVictoria Milhoan1-7/+17
Avoid moving the head of the scatterlist entry by using temporary pointers to walk the scatterlist. Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10crypto: caam - Correct DMA unmap size in ahash_update_ctx()Victoria Milhoan1-1/+1
This change fixes: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 456 at lib/dma-debug.c:1103 check_unmap+0x438/0x958() caam_jr 2101000.jr0: DMA-API: device driver frees DMA memory with different size [device address=0x000000003a241080] [map ] Modules linked in: tcrypt(+) CPU: 0 PID: 456 Comm: insmod Not tainted 4.1.0-248766-gf823586-dirty #82 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [<80015e0c>] (unwind_backtrace) from [<80012764>] (show_stack+0x10/0x14) [<80012764>] (show_stack) from [<806df8e8>] (dump_stack+0x84/0xc4) [<806df8e8>] (dump_stack) from [<800266fc>] (warn_slowpath_common+0x84/0xb4) [<800266fc>] (warn_slowpath_common) from [<8002675c>] (warn_slowpath_fmt+0x30/0x40) [<8002675c>] (warn_slowpath_fmt) from [<802c7db8>] (check_unmap+0x438/0x958) [<802c7db8>] (check_unmap) from [<802c835c>] (debug_dma_unmap_page+0x84/0x8c) [<802c835c>] (debug_dma_unmap_page) from [<804d3b94>] (ahash_update_ctx+0xb08/0xec4) [<804d3b94>] (ahash_update_ctx) from [<7f002984>] (test_ahash_pnum.isra.9.constprop.19+0x2b8/0x514 [tcrypt]) [<7f002984>] (test_ahash_pnum.isra.9.constprop.19 [tcrypt]) from [<7f005998>] (do_test+0x2db8/0x37cc [tcrypt]) [<7f005998>] (do_test [tcrypt]) from [<7f00b050>] (tcrypt_mod_init+0x50/0x9c [tcrypt]) [<7f00b050>] (tcrypt_mod_init [tcrypt]) from [<80009730>] (do_one_initcall+0x8c/0x1d4) [<80009730>] (do_one_initcall) from [<806dda4c>] (do_init_module+0x5c/0x1a8) [<806dda4c>] (do_init_module) from [<80085308>] (load_module+0x17e0/0x1da0) [<80085308>] (load_module) from [<80085998>] (SyS_init_module+0xd0/0x120) [<80085998>] (SyS_init_module) from [<8000f4c0>] (ret_fast_syscall+0x0/0x3c) ---[ end trace 60807cfb6521c79f ]--- Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10crypto: caam - Change kmalloc to kzalloc to avoid residual dataVictoria Milhoan2-19/+18
Since fields must be ORed in to operate correctly using any order of operations, changed allocations of the combination of extended descriptor structs + hardware scatterlists to use kzalloc() instead of kmalloc(), so as to ensure that residue data would not be ORed in with the correct data. Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com> Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10crypto: caam - Modify Freescale CAAM driver Scatter Gather entry definitionVictoria Milhoan2-5/+21
Modify the Scatter-Gather entry definitions for the Freescale CAAM driver to include support for both 64- and 32-bit DMA pointers. Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10crypto: caam - Enable and disable clocks on Freescale i.MX platformsVictoria Milhoan3-0/+94
ARM-based systems may disable clocking to the CAAM device on the Freescale i.MX platform for power management purposes. This patch enables the required clocks when the CAAM module is initialized and disables the required clocks when the CAAM module is shut down. Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10crypto: caam - Add setbits32/clrbits32/clrsetbits primitives for ARM ↵Victoria Milhoan2-3/+26
compatibility Add set/clear 32-bit primitives for compatibility with ARM devices since the primitives were previously only defined for the Power architecture. Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10crypto: caam - Add cache coherency supportVictoria Milhoan3-1/+23
Freescale i.MX6 ARM platforms do not support hardware cache coherency. This patch adds cache coherency support to the CAAM driver. Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Herbert Xu1-32/+12
Merge the crypto tree to pull in the authencesn fix.
2015-08-10crypto: authencesn - Fix breakage with new ESP codeHerbert Xu1-32/+12
The ESP code has been updated to generate a completely linear AD SG list. This unfortunately broke authencesn which expects the AD to be divided into at least three parts. This patch fixes it to cope with the new format. Later we will fix it properly to accept arbitrary input and not rely on the input being linear as part of the AEAD conversion. Fixes: 7021b2e1cddd ("esp4: Switch to new AEAD interface") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-05crypto: authenc - Add Kconfig dependency on CRYPTO_NULLHerbert Xu1-0/+1
CRYPTO_AUTHENC needs to depend on CRYPTO_NULL as authenc uses null for copying. Reported-by: Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04crypto: testmgr - Reenable authenc testsHerbert Xu1-13/+13
Now that all implementations of authenc have been converted we can reenable the tests. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04crypto: talitos - Convert to new AEAD interfaceHerbert Xu1-329/+277
This patch converts talitos to the new AEAD interface. IV generation has been removed since it's equivalent to a software implementation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04crypto: qat - Convert to new AEAD interfaceHerbert Xu1-204/+123
This patch converts qat to the new AEAD interface. IV generation has been removed since it's equivalent to a software implementation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Tadeusz Struk <tadeusz.struk@intel.com>
2015-08-04crypto: picoxcell - Convert to new AEAD interfaceHerbert Xu1-367/+311
This patch converts picoxcell to the new AEAD interface. IV generation has been removed since it's equivalent to a software implementation. As picoxcell cannot handle SG lists longer than 16 elements, this patch has made the software fallback mandatory. If an SG list comes in that exceeds the limit, we will simply use the fallback. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04crypto: ixp4xx - Convert to new AEAD interfaceHerbert Xu1-155/+158
This patch converts ixp4xx to the new AEAD interface. IV generation has been removed since it's a purely software implementation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04crypto: caam - Convert authenc to new AEAD interfaceHerbert Xu1-1245/+1316
This patch converts the authenc implementations in caam to the new AEAD interface. The biggest change is that seqiv no longer generates a random IV. Instead the IPsec sequence number is used as the IV. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04crypto: authenc - Convert to new AEAD interfaceHerbert Xu1-401/+183
This patch converts authenc to the new AEAD interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04crypto: testmgr - Disable authenc test and convert test vectorsHerbert Xu2-39/+109
This patch disables the authenc tests while the conversion to the new IV calling convention takes place. It also replaces the authenc test vectors with ones that will work with the new IV convention. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Herbert Xu3-10/+17
Merge the crypto tree to pull in the qat registration bug fix.
2015-08-04crypto: talitos - Remove zero_entry static initializerAaron Sierra1-6/+1
Compiling the talitos driver with my GCC 4.3.1 e500v2 cross-compiler resulted in a failed build due to the anonymous union/structures introduced in this commit: crypto: talitos - enhanced talitos_desc struct for SEC1 The build error was: drivers/crypto/talitos.h:56: error: unknown field 'len' specified in initializer drivers/crypto/talitos.h:56: warning: missing braces around initializer drivers/crypto/talitos.h:56: warning: (near initialization for 'zero_entry.<anonymous>') drivers/crypto/talitos.h:57: error: unknown field 'j_extent' specified in initializer drivers/crypto/talitos.h:58: error: unknown field 'eptr' specified in initializer drivers/crypto/talitos.h:58: warning: excess elements in struct initializer drivers/crypto/talitos.h:58: warning: (near initialization for 'zero_entry') make[2]: *** [drivers/crypto/talitos.o] Error 1 make[1]: *** [drivers/crypto] Error 2 make: *** [drivers] Error 2 This patch eliminates the errors by relying on the C standard's implicit assignment of zero to static variables. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04crypto: doc - AEAD API conversionStephan Mueller2-2/+26
The AEAD API changes are now reflected in the crypto API doc book. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-04crypto: img-hash - fix spelling mistake in dev_err error messageColin Ian King1-1/+1
Trival change, fix spelling mistake 'aquire' -> 'acquire' in dev_err message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-31crypto: caam - fix rfc4106 encap shared descriptorHoria Geant?1-9/+15
The encap shared descriptor was changed to use the new IV convention. In the process some commands were shifted, making the output length zero, caam effectively writing garbage in dst. While here, update the decap descriptor to execute the "write" commands before the "read"s (as it previously was). This makes sure the input fifo is drained before becoming full. Fixes: 46218750d523 ("crypto: caam - Use new IV convention") Signed-off-by: Horia Geant? <horia.geanta@freescale.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-30MAINTAINERS: change 842 NX owner email addressDan Streetman1-1/+1
Change my IBM email to my personal IEEE email. I'm leaving IBM, so my email there won't work anymore. This changes the owner to my personal email, so I can still get cc'ed on patches, until someone at IBM sends a patch to take it over. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-30crypto: nx - use be32_to_cpu for __be32 field in debug msgDan Streetman1-1/+2
One of the debug messages in the NX 842 PowerNV driver is missing the required be32_to_cpu() wrapper when accessing the __be32 field csb->count. Add the wrapper so the message will show the correct count. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-30crypto: nx - don't err if compressed output > inputDan Streetman1-2/+5
Return success instead of error if compression succeeds but the output is larger than the input. It's unlikely that the caller will use the compressed data since it's larger than the original uncompressed data, but there was no error and returning an error code is incorrect. Further, for testing small input buffers, the output is likely to be larger than the input and success needs to be returned to verify the test. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-28crypto: qat - remove unnecessary list iterationBruce Allan1-6/+1
There's no need to iterate through the list for instances in the accel_table since the number of devices is already known in this file. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-28crypto: jitterentropy - use safe format string parametersKees Cook1-1/+1
Since the API for jent_panic() does not include format string parameters, adjust the call to panic() to use a literal string to avoid any future callers from leaking format strings into the panic message. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-28crypto: qat - Fix typo othewise->otherwiseAhsan Atta5-11/+11
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-28crypto: qat - remove unused defineBruce Allan1-1/+0
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-28crypto: qat - fix bug in ADF_RING_SIZE_BYTES_MIN macroBruce Allan1-2/+3
The subject macro mistakenly compares the passed-in ring size in bytes with ADF_RING_SIZE_4K which is 0x6 (an internal representation of 4KB) rather than comparing with the intended value of 4096. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-28crypto: qat - remove redundant struct elemBruce Allan3-3/+1
The element pci_dev_id in the struct adf_hw_device_data is redundant since the PCI device id can be retrieved from the struct pci_dev. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-28hwrng: core - correct error check of kthread_run callMartin Schwidefsky1-1/+1
The kthread_run() function can return two different error values but the hwrng core only checks for -ENOMEM. If the other error value -EINTR is returned it is assigned to hwrng_fill and later used on a kthread_stop() call which naturally crashes. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-23crypto: nx - make platform drivers directly register with cryptoDan Streetman6-191/+114
Remove the common 'platform' registration module, and move the crypto compression driver registration into each of the pSeries and PowerNV platform NX 842 drivers. Change the nx-842.c code into simple common functions that each platform driver uses to perform constraints-based buffer changes, i.e. realigning and/or resizing buffers to match the driver's hardware requirements. The common 'platform' module was my mistake to create - since each platform driver will only load/operate when running on its own platform (i.e. a pSeries platform or a PowerNV platform), they can directly register with the crypto subsystem, using the same alg and driver name. This removes unneeded complexity. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-23crypto: nx - rename nx-842-crypto.c to nx-842.cDan Streetman2-1/+1
The last commit merged nx-842.c's code into nx-842-crypto.c. It did not rename nx-842-crypto.c to nx-842.c, in order to let the patch more clearly show what was merged. This just renames nx-842-crypto.c to nx-842.c, with no changes to its code. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-23crypto: nx - merge nx-compress and nx-compress-cryptoDan Streetman5-162/+60
Merge the nx-842.c code into nx-842-crypto.c. This allows later patches to remove the 'platform' driver, and instead allow each platform driver to directly register with the crypto compression api. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-23crypto: nx - use common code for both NX decompress success casesDan Streetman1-4/+2
Replace the duplicated finishing code (set destination buffer length and set return code to 0) in the case of decompressing a buffer with no header with a goto to the success case of decompressing a buffer with a header. This is a trivial change that allows both success cases to use common code, and includes the pr_debug() msg in both cases as well. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-23crypto: nx - don't register pSeries driver if ENODEVDan Streetman1-4/+1
Don't register the pSeries driver when parsing the device tree returns ENODEV. The nx842_probe() function in the pSeries driver returns error instead of registering as a crypto compression driver, when it receives an error return value from the nx842_OF_upd() function that probes the device tree nodes, except when ENODEV is returned. However ENODEV should not be a special case and the driver should not register when there is no hw device, or the hw device is disabled. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-23crypto: nx - move kzalloc() out of spinlockDan Streetman1-22/+16
Move the kzalloc() calls in nx842_probe() and nx842_OF_upd() to the top of the functions, before taking the devdata spinlock. Since kzalloc() without GFP_ATOMIC can sleep, it can't be called while holding a spinlock. Move the calls to before taking the lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-23crypto: nx - remove pSeries NX 'status' fieldDan Streetman1-29/+10
Remove the 'status' field from the pSeries NX driver data. The 'status' field isn't used by the driver at all; it simply checks the devicetree status node at initialization, and returns success if 'okay' and failure otherwise. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-23crypto: nx - remove __init/__exit from VIO functionsDan Streetman1-4/+4
Remove the __init and __exit modifiers from the VIO driver probe and remove functions. The driver functions should not be marked __init/__exit because they can/will be called during runtime, not only at module init and exit. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-23crypto: qat - Don't attempt to register algorithm multiple timesTadeusz Struk1-3/+16
When multiple devices are present in the system the driver attempts to register the same algorithm many times. Changes in v2: - use proper synchronization mechanizm between register and unregister Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 04:12:14 +0000