summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2015-10-19i40e: Fix basic support for X722 devicesAnjali Singhai3-6/+31
Acquire NVM, before issuing an AQ read nvm command for X722. We need to acquire the NVM before issuing an AQ read to the NVM otherwise we will get EBUSY from the FW. Also release when done. This fixes the two X722 issues with respect to eeprom checksum verify and reading NVM version info. With this patch in place, i40e driver will provide basic support for X722 devices. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-19i40evf: fix overlong BIT definesJesse Brandeburg2-12/+7
The defines from the RSS enabling call were mistakenly missed in the patches to the i40e which should have been to i40evf as well. This is a follow up to (commit ed921559886dd40528) "fix 32 bit build warnings". Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-19i40e: Lock for VSI's MAC filter listKiran Patil4-56/+282
This patch introduces a spinlock which is to be used for synchronizing access to VSI's MAC filter list. This patch also synchronizes execution of other codepaths which are accessing VSI's MAC filter list with execution of service_task:sync_vsi_filters. In function i40e_add_vsi, copied out LAA MAC address instead of cloning MAC filter entry because only MAC address is needed to remove MAC VLAN filter from FW/HW. Change-ID: I0e10ac7c715d44aa994239642aa4d57c998573a2 Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller46-444/+348
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree. Most relevantly, updates for the nfnetlink_log to integrate with conntrack, fixes for cttimeout and improvements for nf_queue core, they are: 1) Remove useless ifdef around static inline function in IPVS, from Eric W. Biederman. 2) Simplify the conntrack support for nfnetlink_queue: Merge nfnetlink_queue_ct.c file into nfnetlink_queue_core.c, then rename it back to nfnetlink_queue.c 3) Use y2038 safe timestamp from nfnetlink_queue. 4) Get rid of dead function definition in nf_conntrack, from Flavio Leitner. 5) Attach conntrack support for nfnetlink_log.c, from Ken-ichirou MATSUZAWA. This adds a new NETFILTER_NETLINK_GLUE_CT Kconfig switch that controls enabling both nfqueue and nflog integration with conntrack. The userspace application can request this via NFULNL_CFG_F_CONNTRACK configuration flag. 6) Remove unused netns variables in IPVS, from Eric W. Biederman and Simon Horman. 7) Don't put back the refcount on the cttimeout object from xt_CT on success. 8) Fix crash on cttimeout policy object removal. We have to flush out the cttimeout extension area of the conntrack not to refer to an unexisting object that was just removed. 9) Make sure rcu_callback completion before removing nfnetlink_cttimeout module removal. 10) Fix compilation warning in br_netfilter when no nf_defrag_ipv4 and nf_defrag_ipv6 are enabled. Patch from Arnd Bergmann. 11) Autoload ctnetlink dependencies when NFULNL_CFG_F_CONNTRACK is requested. Again from Ken-ichirou MATSUZAWA. 12) Don't use pointer to previous hook when reinjecting traffic via nf_queue with NF_REPEAT verdict since it may be already gone. This also avoids a deadloop if the userspace application keeps returning NF_REPEAT. 13) A bunch of cleanups for netfilter IPv4 and IPv6 code from Ian Morris. 14) Consolidate logger instance existence check in nfulnl_recv_config(). 15) Fix broken atomicity when applying configuration updates to logger instances in nfnetlink_log. 16) Get rid of the .owner attribute in our hook object. We don't need this anymore since we're dropping pending packets that have escaped from the kernel when unremoving the hook. Patch from Florian Westphal. 17) Remove unnecessary rcu_read_lock() from nf_reinject code, we always assume RCU read side lock from .call_rcu in nfnetlink. Also from Florian. 18) Use static inline function instead of macros to define NF_HOOK() and NF_HOOK_COND() when no netfilter support in on, from Arnd Bergmann. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18RDS: fix rds-ping deadlock over TCP transportsantosh.shilimkar@oracle.com1-3/+2
Sowmini found hang with rds-ping while testing RDS over TCP. Its a corner case and doesn't happen always. The issue is not reproducible with IB transport. Its clear from below dump why we see it with RDS TCP. [<ffffffff8153b7e5>] do_tcp_setsockopt+0xb5/0x740 [<ffffffff8153bec4>] tcp_setsockopt+0x24/0x30 [<ffffffff814d57d4>] sock_common_setsockopt+0x14/0x20 [<ffffffffa096071d>] rds_tcp_xmit_prepare+0x5d/0x70 [rds_tcp] [<ffffffffa093b5f7>] rds_send_xmit+0xd7/0x740 [rds] [<ffffffffa093bda2>] rds_send_pong+0x142/0x180 [rds] [<ffffffffa0939d34>] rds_recv_incoming+0x274/0x330 [rds] [<ffffffff810815ae>] ? ttwu_queue+0x11e/0x130 [<ffffffff814dcacd>] ? skb_copy_bits+0x6d/0x2c0 [<ffffffffa0960350>] rds_tcp_data_recv+0x2f0/0x3d0 [rds_tcp] [<ffffffff8153d836>] tcp_read_sock+0x96/0x1c0 [<ffffffffa0960060>] ? rds_tcp_recv_init+0x40/0x40 [rds_tcp] [<ffffffff814d6a90>] ? sock_def_write_space+0xa0/0xa0 [<ffffffffa09604d1>] rds_tcp_data_ready+0xa1/0xf0 [rds_tcp] [<ffffffff81545249>] tcp_data_queue+0x379/0x5b0 [<ffffffffa0960cdb>] ? rds_tcp_write_space+0xbb/0x110 [rds_tcp] [<ffffffff81547fd2>] tcp_rcv_established+0x2e2/0x6e0 [<ffffffff81552602>] tcp_v4_do_rcv+0x122/0x220 [<ffffffff81553627>] tcp_v4_rcv+0x867/0x880 [<ffffffff8152e0b3>] ip_local_deliver_finish+0xa3/0x220 This happens because rds_send_xmit() chain wants to take sock_lock which is already taken by tcp_v4_rcv() on its way to rds_tcp_data_ready(). Commit db6526dcb51b ("RDS: use rds_send_xmit() state instead of RDS_LL_SEND_FULL") which was trying to opportunistically finish the send request in same thread context. But because of above recursive lock hang with RDS TCP, the send work from rds_send_pong() needs to deferred to worker to avoid lock up. Given RDS ping is more of connectivity test than performance critical path, its should be ok even for transport like IB. Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18uapi: add mpls_iptunnel.hstephen hemminger1-0/+1
Add missing rule to export mpls iptunnel header needed by iproute2 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18tcp: do not set queue_mapping on SYNACKEric Dumazet6-9/+4
At the time of commit fff326990789 ("tcp: reflect SYN queue_mapping into SYNACK packets") we had little ways to cope with SYN floods. We no longer need to reflect incoming skb queue mappings, and instead can pick a TX queue based on cpu cooking the SYNACK, with normal XPS affinities. Note that all SYNACK retransmits were picking TX queue 0, this no longer is a win given that SYNACK rtx are now distributed on all cpus. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hix5hd2_gmac: avoid integer overload warningArnd Bergmann1-1/+1
BITS_RX_EN is an 'unsigned long' constant, so the ones complement of that has bits set that do not fit into a 32-bit variable on 64-bit architectures, which causes a harmless gcc warning: drivers/net/ethernet/hisilicon/hix5hd2_gmac.c: In function 'hix5hd2_port_disable': drivers/net/ethernet/hisilicon/hix5hd2_gmac.c:374:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] writel_relaxed(~(BITS_RX_EN | BITS_TX_EN), priv->base + PORT_EN); This adds a cast to (u32) to tell gcc that the code is indeed fine. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hisilicon: add OF dependencyArnd Bergmann1-1/+1
The HNS MDIO driver fails to build on older ARM machines that are not yet converted to CONFIG_OF: drivers/net/ethernet/hisilicon/hns_mdio.c: In function 'hns_mdio_bus_name': drivers/net/ethernet/hisilicon/hns_mdio.c:405:14: error: 'OF_BAD_ADDR' undeclared (first use in this function) u64 taddr = OF_BAD_ADDR; ^ drivers/net/ethernet/hisilicon/hns_mdio.c:405:14: note: each undeclared identifier is reported only once for each function it appears in drivers/net/ethernet/hisilicon/hns_mdio.c:409:11: error: implicit declaration of function 'of_translate_address' [-Werror=implicit-function-declaration] taddr = of_translate_address(np, addr); ^ This clarifies the dependency to ensure we don't attempt to build these drivers without CONFIG_OF, but also adds a COMPILE_TEST alternative to give us better build coverage testing. Build-tested on x86 as well to ensure this actually works. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hisilicon: include linux/vmalloc.h in dsafArnd Bergmann1-0/+2
Some configurations fail to build the hns dsaf code because of a missing header file: ethernet/hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_init': ethernet/hisilicon/hns/hns_dsaf_main.c:1096:2: error: implicit declaration of function 'vzalloc' [-Werror=implicit-function-declaration] priv->soft_mac_tbl = vzalloc(sizeof(*priv->soft_mac_tbl) This adds the correct #include. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18Merge branch 'hns-fixes'David S. Miller2-34/+18
yankejian says: ==================== net: hns: fixes two bugs in hns driver This patchset fixes two bugs in hns driver. - fixes timeout when received pause frame from the connective ports - should be set by using ethtool -s when the devices are link down ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hns: fixes a bug about timeout by pause framelisheng1-7/+6
this patch fixes the bug triggered timeout sequence. when the connective ports cannot accept the packets with higher speed, they will send out the pause frame to the Soc's mac. At that time, the driver resets the relevant of the Soc, then it causes the packets cannot be sent out immediately. this patch fixes the issue. Signed-off-by: yankejian <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: lisheng <lisheng011@huawei.com> Signed-off-by: lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hns: fixes the issue by using ethtool -sChenny Xu1-27/+12
before this patch, hns driver only permits user to set the net device by using ethtool -s when the device is link up. it is obviously not so good. it needs to be set no matter it is link up or down. so this patch fixes this issue. Signed-off-by: yankejian <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: lisheng <lisheng011@huawei.com> Signed-off-by: lipeng <lipeng321@huawei.com> Signed-off-by: Chenny Xu <chenny.xu@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18Merge branch 'hsi-fixes'David S. Miller2-48/+1
huangdaode says: ==================== net: hisilicon fix some bugs in HNS drivers This patchset fixes the two bugs in HNS driver, one is remove the hnae sysfs interface according to the review comments from Arnd Bergmann <arnd@arndb.de>, another is fixing the wrong mac_id judgement bug which is found during internal tests. change log: v3: remove the hnae sysfs interface. v2: 1) remove first bug fix, which is fixed in another patch submitted by Arnd Bergmann <arnd@arndb.de> 2) change the code sytyle according to Joe. v1: initial version. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hisilicon fix a bug on Hisilicon Network Subsystemhuangdaode1-1/+1
This patch fixes the wrong judgement of mac_id when get port num. Signed-off-by: huangdaode <huangdaode@hisilicon.com> Signed-off-by: yankejian <yankejian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: hisilicon rm hnae sysfs interfacehuangdaode1-47/+0
This patch removes the hns driver hnae sysfs interface according to Arnd's review comments. Signed-off-by: huangdaode <huangdaode@hisilicon.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18net: phy: bcm-phy-lib: Fix module license issueArun Parameswaran1-0/+5
The 'bcm-phy-lib.c', added as a part of the commit "net: phy: Add Broadcom phy library for common interfaces" was missing the module license. This was causing an issue when the library is built as a module; "module license 'unspecified' taints kernel". This patch fixes the issue by adding the module license, author and description to the bcm-phy-lib.c file. Fixes: a1cba5613edf5 ("net: phy: Add Broadcom phy library for common interfaces") Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18ipconfig: send Client-identifier in DHCP requestsLi RongQing2-1/+34
A dhcp server may provide parameters to a client from a pool of IP addresses and using a shared rootfs, or provide a specific set of parameters for a specific client, usually using the MAC address to identify each client individually. The dhcp protocol also specifies a client-id field which can be used to determine the correct parameters to supply when no MAC address is available. There is currently no way to tell the kernel to supply a specific client-id, only the userspace dhcp clients support this feature, but this can not be used when the network is needed before userspace is available such as when the root filesystem is on NFS. This patch is to be able to do something like "ip=dhcp,client_id_type, client_id_value", as a kernel parameter to enable the kernel to identify itself to the server. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-17Merge branch 'master' of ↵Pablo Neira Ayuso620-7263/+23787
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next This merge resolves conflicts with 75aec9df3a78 ("bridge: Remove br_nf_push_frag_xmit_sk") as part of Eric Biederman's effort to improve netns support in the network stack that reached upstream via David's net-next tree. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Conflicts: net/bridge/br_netfilter_hooks.c
2015-10-16netfilter: ipv4: whitespace around operatorsIan Morris3-6/+6
This patch cleanses whitespace around arithmetical operators. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-16netfilter: ipv4: code indentationIan Morris3-5/+5
Use tabs instead of spaces to indent code. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-16netfilter: ipv4: function definition layoutIan Morris2-6/+6
Use tabs instead of spaces to indent second line of parameters in function definitions. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-16netfilter: ipv4: ternary operator layoutIan Morris2-5/+5
Correct whitespace layout of ternary operators in the netfilter-ipv4 code. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-16netfilter: ipv4: label placementIan Morris2-2/+2
Whitespace cleansing: Labels should not be indented. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-16netfilter: turn NF_HOOK into an inline functionArnd Bergmann2-4/+17
A recent change to the dst_output handling caused a new warning when the call to NF_HOOK() is the only used of a local variable passed as 'dev', and CONFIG_NETFILTER is disabled: net/ipv6/ip6_output.c: In function 'ip6_output': net/ipv6/ip6_output.c:135:21: warning: unused variable 'dev' [-Wunused-variable] The reason for this is that the NF_HOOK macro in this case does not reference the variable at all, and the call to dev_net(dev) got removed from the ip6_output function. To avoid that warning now and in the future, this changes the macro into an equivalent inline function, which tells the compiler that the variable is passed correctly but still unused. The dn_forward function apparently had the same problem in the past and added a local workaround that no longer works with the inline function. In order to avoid a regression, we have to also remove the #ifdef from decnet in the same patch. Fixes: ede2059dbaf9 ("dst: Pass net into dst->output") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-16netfilter: nf_queue: remove rcu_read_lock callsFlorian Westphal1-12/+4
All verdict handlers make use of the nfnetlink .call_rcu callback so rcu readlock is already held. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-16netfilter: make nf_queue_entry_get_refs return voidFlorian Westphal4-19/+7
We don't care if module is being unloaded anymore since hook unregister handling will destroy queue entries using that hook. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-16netfilter: remove hook owner refcountingFlorian Westphal18-68/+0
since commit 8405a8fff3f8 ("netfilter: nf_qeueue: Drop queue entries on nf_unregister_hook") all pending queued entries are discarded. So we can simply remove all of the owner handling -- when module is removed it also needs to unregister all its hooks. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-16Merge branch 'mlxsw-spectrum'David S. Miller16-12/+4604
Jiri Pirko says: ==================== mlxsw: Driver update, add initial support for Spectrum ASIC Purpose of this patchset is to introduce initial support for Mellanox Spectrum ASIC, including L2 bridge forwarding offload. The only non-mlxsw patch in this patchset is the first one, introducing pre-change upper notifier. That is used in last patch to ensure ports of single ASIC are not bridged into multiple bridges, as that scenario is currently not supported by driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: spectrum: Add initial support for Spectrum ASICJiri Pirko10-0/+3374
Add support for new generation Mellanox Spectrum ASIC, 10/25/40/50 and 100Gb/s Ethernet Switch. The initial driver implements bridge forwarding offload including bridge internal VLAN support, FDB static entries, FDB learning and HW ageing including their setup. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch Port VLAN MAC Learning register definitionIdo Schimmel1-0/+67
Since we currently do not support the offloading of 802.1D bridges, we need to be able to let the device know it should not learn MAC addresses on specific {Port, VID} pairs. Add the SPVMLR register, which controls the learning enablement of {Port, VID} pairs. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch Filtering Database Aging Time register definitionJiri Pirko1-0/+37
Add SFDAT which is used to control switch ageing time. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch Virtual-Port Enabling register definitionIdo Schimmel1-0/+38
In order for a port to support {Port, VID} to FID mapping it needs to be configured to a virtual port mode (as opposed to VLAN mode). Add the SVPE register, which enables port virtualization. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch VID to FID Allocation register definitionIdo Schimmel1-0/+95
An incoming packet can be classified into a filtering identifer (FID) based on its VID or incoming port and VID ({Port, VID}). Add the SVFA register, which controls this mapping. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch FID Management register definitionIdo Schimmel1-0/+87
Filtering identifiers (FIDs) are unique identifers of bridge instances in the hardware. Add the SFMR register, which is responsible for the creation and configuration of these FIDs. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add shared buffer configuration registers definitionsJiri Pirko1-0/+349
Add definitions of SBPR, SBCM, SBPM, SBMM and PBMC registers that are used to configure shared buffers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch Port VID and Switch Port VLAN Membership registers ↵Elad Raz1-0/+146
definitions Add SPVID and SPVM registers responsible for default port VID configuration and VLAN membership of a port. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch FDB Notification register definitionJiri Pirko1-0/+101
Add SFN register which is used to poll for newly added and aged-out FDB entries. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch Filtering Database register definitionJiri Pirko1-0/+216
Add the SFD register which is responsible for filtering database manipulation, including static and dynamic FDB entries. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: item: Add MLXSW_ITEM_BUF_INDEXED helperJiri Pirko1-6/+40
Add missing item helper which allows to access char bufs on multiple offsets. This is needed by SFD and SFN register definitions. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: item: Make src arg of memcpy_to helper constJiri Pirko1-2/+2
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: cmd: Introduce FID-offset flooding tablesIdo Schimmel3-0/+18
Packets destined to offloaded netdevs will be classified to FIDs in the device and flooded in case of BUM. The flooding table used is of type FID-offset, which allows one to create different flooding domains for different FIDs and specify the offset in the flooding table for each FID (not necessarily equal to FID or VID). Add support for this flooding table type, by exposing the configuration of the number of tables from this type and their size. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: cmd: Introduce per-FID flooding tablesIdo Schimmel3-0/+19
In the newly introduced Spectrum switch ASIC, packets destined to not offloaded netdevs will be classified to special FIDs (vFIDs) in the device and flooded to the CPU port. The flooding table used is of type per-FID, which allows one to create different flooding domains for different vFIDs. While using a simple single-entry flood table is certainly sufficient at this point, we do plan to offload 802.1D bridges involving VLAN interfaces, thus making this change necessary. Add support for this flooding table type, by exposing the configuration of the number of tables from this type and their size. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: Enable configuration of flooding domainsIdo Schimmel2-4/+5
As part of the introduction of L2 offloads, allow different ports to join/leave the flooding domain, according to user configuration. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16net: introduce pre-change upper device notifierJiri Pirko2-0/+10
This newly introduced netdevice notifier is called before actual change upper happens. That provides a possibility for notifier handlers to know upper change will happen and react to it, including possibility to forbid the change. That is valuable for drivers which can check if the upper device linkage is supported and forbid that in case it is not. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16Merge branch 'master' of ↵David S. Miller26-92/+211
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-10-16 This series contains updates to e1000, e1000e, igb, igbvf, ixgbe, ixgbevf, i40e, i40evf and fm10k. Alex Duyck fixes the polling routine for i40e/i40evf were the NAPI budget for receive cleanup was being rounded up to 1 but the netpoll call was expecting no Rx to be processed as the budget passed was 0. Also cleaned up IN_NETPOLL flag that was not adding any value due to the receive cleanup was handled in NAPI. Added support for netpoll for i40evf as well. Jesse updates all of our drivers to use napi_complete_done() instead of napi_complete(), which allows us to use /sys/class/net/ethX/gro_flush_timeout. Added ethtool support to control and report the new Interrupt Limit register, since the XL710 hardware has a different interrupt moderation design that can support a limit of total interrupts per second per vector. Shannon cleans up startup log entries to cut down the number by putting a couple behind debug flags and combining others into single line. Added support to enable/disable printing VEB statistics via ethtool. Jingjing fixes a compile issue by adding const to functions that return strings that are not going to be modified. Greg Rose cleans up defines that were not used and were causing customer confusion. Greg Bowers adds support for setting a new bit in the Set Local LLDP MIB admin queue command Type field. Mitch fixes an issue where vlan_features field was set to the same value as netdev features field, but before the features were actually being set up, leaving the vlan_features empty. Resolve the issue by setting up the netdev features first, then mask out the VLAN feature bits when assigning vlan_features. Fixed VF init timing, where in some instances the VFs would fail to initialize the first time you loaded the driver. To correct this, increased the delay time for the init task and wait longer before giving up. v2: fix missing space in function header comment in patch 3, based on feedback from Sergei Shtylyov. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16i40e/i40evf: Bump i40e to 1.3.34 and i40evf to 1.3.21Catherine Sullivan2-2/+2
Bump. Change-ID: I7ec818a507554648675b9b245ced9e6b6bd9ed4e Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e: increase AQ work limitMitch Williams1-1/+1
With 64 VFs, we can easily overwhelm the AQ on the PF if we have too low a limit on the number of AQ requests. This leads to ARQ overflow errors, and occasionally VFs that fail to initialize. Since we really only hit this condition on initial VF driver load, the requests that we process are lightweight, so this extra work doesn't cause problems for the PF driver. Change-ID: I620221520d8af987df6ace9ba938ffaf22107681 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40evf: relax and stagger init timing a bitMitch Williams2-3/+3
On some devices, in some systems, in some configurations, the VFs would fail to initialize the first time you loaded the driver. To correct this, increase the delay time for the init task slightly, and wait longer before giving up. If we enable VFs and load the VF driver in the same kernel as the PF driver, we can totally overwhelm the PF driver with AQ requests because all of the instances try to initialize at the same time. To help alleviate this, stagger the initial scheduling of the init task using the PCIe function as a multiplier. We mask off the function to only three bits so no instance has to wait too long. With these two changes, initializing 128 VFs on a single device goes from four minutes to just a few seconds. Change-ID: If3d8720c1c4e838ab36d8781d9ec295a62380936 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e: Recognize 1000Base_T_Optical phy type when link is upCatherine Sullivan1-0/+6
1000Base_T_Optical got added to the function that figures out what is supported when link is down but not when link is up. Add it in there too so that we display the correct information. Change-ID: I85ebcdfa7c02d898c44c673b1500552a53c8042e Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>