summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2008-03-03[NETNS][IPV6] ip6_fib - dynamically allocate gc-timerDaniel Lezcano1-12/+21
The ip6_fib_timer gc timer is dynamically allocated and initialized in the ip6 fib init function. There are no more references to a static global variable. That will allow to make multiple instance of the garbage collecting timer and make them per namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03[NETNS][IPV6] ip6_fib - add net to gc timer parameterDaniel Lezcano4-14/+26
The fib tables are now relative to the network namespace. When the garbage collector timer expires, we must have a network namespace parameter in order to retrieve the tables. For now this is the init_net, but we should be able to have a timer per namespace and use the timer callback parameter to pass the network namespace from the expired timer. The timer callback, fib6_run_gc, is actually used to be called synchronously by some functions and asynchronously when the timer expires. When the timer expires, the delay specified for fib6_run_gc parameter is always zero. So, I changed fib6_run_gc to not be a timer callback but a function called by the timer callback and I added a timer callback where its work is just to retrieve from the data arg of the timer the network namespace and call fib6_run_gc with zero expiring time and the network namespace parameters. That makes the code cleaner for the fib6_run_gc callers. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03[NETNS][IPV6] ip6_fib - fib6_clean_all handle several network namespacesDaniel Lezcano5-14/+29
The function fib6_clean_all takes the network namespace as parameter. That allows to flush the routes related to a specific network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03[NETNS][IPV6] ip6_fib - make it per network namespaceDaniel Lezcano5-86/+119
The fib table for ipv6 are moved to the network namespace structure. All references to them are made relatively to the network namespace. All external calls to the ip6_fib functions taking the network namespace parameter are made using the init_net variable, so the ip6_fib engine is ready for the namespaces but the callers not yet. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03[NETNS][IPV6] ip6_fib - dynamically allocate the fib tablesDaniel Lezcano1-23/+48
This patch changes the fib6 tables to be dynamically allocated. That provides the ability to make several instances of them when a new network namespace is created. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04[IPV6] MCAST: Use standard path for sending MLD/MLDv2 messages.YOSHIFUJI Hideaki1-21/+45
This is changing the paths for sending MLD/MLDv2 messages from dev_queue_xmit() to standard dst_output(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04[IPV6]: Make ndisc_dst_alloc() common for later use.YOSHIFUJI Hideaki4-20/+19
For later use, this patch is renaming ndisc_dst_alloc() (and related function/structures) to icmp6_dst_alloc() (and so on). This patch also removing unused function- pointer argument for it. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04[IPV6]: Make ndisc_flow_init() common for later use.YOSHIFUJI Hideaki3-19/+28
For later use, this patch is renaming ndisc_flow_init() to icmpv6_flow_init() and putting it in common place. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04[IPV6] ADDRCONF: Convert ipv6_get_saddr() to ipv6_dev_get_saddr().YOSHIFUJI Hideaki7-18/+12
Since most users of ipv6_get_saddr() pass non-NULL as dst argument, use ipv6_dev_get_saddr() directly. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04[NET] NEIGHBOUR: Remove unpopular neigh_is_connected().YOSHIFUJI Hideaki2-7/+1
neigh_is_connected() is not popular at all, and the only user drivers/net/cxgb3/l2t.c:t3_l2t_update() also have raw (expanded) expression. Let's expand it and remove the inline function. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04[IPV6]: Use htonl() instead of __constant_htonl() where appricable.YOSHIFUJI Hideaki1-10/+6
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04[IPV6] SYSCTL: complete initialization for sysctl table in subsystem code.YOSHIFUJI Hideaki3-14/+19
Move initialization bits for subsystem sysctl tables to appropriate functions. - route - icmp Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04[IPV6]: Move packet_type{} related bits to af_inet6.c.YOSHIFUJI Hideaki3-126/+123
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04[IPV6] UDP: Rename IPv6 UDP files.YOSHIFUJI Hideaki3-2/+2
Rename net/ipv6/udp.c to net/ipv6/udp_ipv6.c Rename net/ipv6/udplite.c to net/ipv6/udplite_ipv6.c. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04[IPV4] UDP: Move IPv4-specific bits to other file.YOSHIFUJI Hideaki4-1088/+1136
Move IPv4-specific UDP bits from net/ipv4/udp.c into (new) net/ipv4/udp_ipv4.c. Rename net/ipv4/udplite.c to net/ipv4/udplite_ipv4.c. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04[IPV4]: Fix size description of CONFIG_INET.YOSHIFUJI Hideaki1-1/+1
CONFIG_INET now enlarges about 400KB, not 140KB. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04[UDP]: Allow users to configure UDP-Lite.YOSHIFUJI Hideaki14-25/+99
Let's give users an option for disabling UDP-Lite (~4K). old: | text data bss dec hex filename | 286498 12432 6072 305002 4a76a net/ipv4/built-in.o | 193830 8192 3204 205226 321aa net/ipv6/ipv6.o new (without UDP-Lite): | text data bss dec hex filename | 284086 12136 5432 301654 49a56 net/ipv4/built-in.o | 191835 7832 3076 202743 317f7 net/ipv6/ipv6.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04[TCP]: Add IPv6 support to TCP SYN cookiesGlenn Griffin8-26/+338
Updated to incorporate Eric's suggestion of using a per cpu buffer rather than allocating on the stack. Just a two line change, but will resend in it's entirety. Signed-off-by: Glenn Griffin <ggriffin.kernel@gmail.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04[TCP]: lower stack usage in cookie_hash() functionEric Dumazet1-1/+3
400 bytes allocated on stack might be a litle bit too much. Using a per_cpu var is more friendly. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-03[ARP]: Introduce the arp_hdr_len helper.Pavel Emelyanov6-22/+14
There are some place, that calculate the ARP header length. These calculations are correct, but a) some operate with "magic" constants, b) enlarge the code length (sometimes at the cost of coding style), c) are not informative from the first glance. The proposal is to introduce a helper, that includes all the good sides of these calculations. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03ipv6: fix inet6_init/icmpv6_cleanup sections mismatchAlexey Dobriyan1-2/+2
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03[TCP]: Merge exit paths in tcp_v4_conn_request.Denis V. Lunev1-10/+6
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03[SCTP]: seq_printf format warning. (fixed)Denis V. Lunev1-1/+1
sctp_association->hbinterval is unsigned long. Replace %8d with %8lu. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03[IPV4]: skb->dst can't be NULL in ip_options_echo.Denis V. Lunev1-4/+1
ip_options_echo is called on the packet input path after the initial routing. The dst entry on the packet is cleared only in the several very specific places and immidiately assigned back (may be new). Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[ICMP]: Section conflict between icmp_sk_init/icmp_sk_exit.Denis V. Lunev1-1/+3
Functions from __exit section should not be called from ones in __init section. Fix this conflict. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29Merge branch 'master' of ↵David S. Miller147-8305/+10637
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.26
2008-02-29mac80211: fix key replacing, hw accelJohannes Berg1-7/+20
Even though I thought about it a lot and had also tested it, some of my recent changes in the key code broke replacing keys, making the kernel oops because a key is removed from a list while not on it. This patch fixes that using the list as an indication whether or not the key is on it (an empty list means it's not on any list.) Also, this patch fixes hw accel enabling, the check for not doing hw accel when the interface is down was lost and is restored by this. Additionally, move adding the key to the list into the function __ieee80211_key_replace() for more consistency. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: split ieee80211_key_alloc/freeJohannes Berg5-98/+203
In order to RCU-ify sta_info, we need to be able to allocate a key without linking it to an sdata/sta structure (because allocation cannot be done in an rcu critical section). This patch splits up ieee80211_key_alloc() and updates all users appropriately. While at it, this patch fixes a number of race conditions such as finally making key replacement atomic, unfortunately at the expense of more complex code. Note that this patch documents /existing/ bugs with sta info and key interaction, there is currently a race condition when a sta info is freed without holding the RTNL. This will finally be fixed by a followup patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: remove STA infos last_ack stuffJohannes Berg4-39/+0
These things aren't used and the only possible use is within rate control algorithms, however those can, if they need it, keep track of it in their private data. last_ack_ms isn't even updated so completely useless. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: safely free beacon in ieee80211_if_reinitJohannes Berg1-1/+5
If ieee80211_if_reinit() is called from ieee80211_unregister_hw() then it is possible that the driver will still request a beacon (it is allowed to until ieee80211_unregister_hw() has returned.) This means we need to use an RCU-protected write to the beacon information even in this function. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: clarify use of TX status/RX callbacksJohannes Berg1-3/+34
This patch clarifies the use of the irqsafe vs. non-irq-safe functions and their respective locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29ath5k: fix all endian issues reported by sparsePavel Roskin2-6/+6
Changes-licensed-under: ISC Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29rt2x00: Release rt2x00 2.1.3Ivo van Doorn1-1/+1
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29rt2x00: Check for 5GHz band in link tunerIvo van Doorn1-1/+1
Fix a typo in the link tuner where accidently the 2GHz band was checked instead of the 5GHz band. This forced the link tuner to work in an invalid range for the currently active band. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29p54: print unknown eeprom fieldsFlorian Fainelli1-0/+4
This patch allows p54common to print the uknown EEPROM fields, which can help when debugging/testing devices. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29adm8211: fix cfg80211 band API conversionJohannes Berg1-0/+2
Insert a missing band assignment. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29b43legacy: Fix nondebug buildMichael Buesch1-1/+1
Fix a typo. Signed-off-by: Michael Buesch <mb@bu3sch.de> Acked-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29ssb: Add CHIPCO IRQ access functionsAurelien Jarno2-0/+14
This patch adds functions to setup and read the CHIPCO IRQ. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: fix IBSS codeJohannes Berg1-3/+3
This patch fixes two errors introduced by commit 19d35612f3cd7f60dd9174c0100584e21f5a1025 Author: Bruno Randolf <bruno@thinktube.com> Date: Mon Feb 18 11:21:36 2008 +0900 mac80211: enable IBSS merging The first error is an endianness problem that sparse found and the second is a build failure when CONFIG_MAC80211_IBSS_DEBUG is not set. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Bruno Randolf <bruno@thinktube.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: fix debugfs_sta print_mac() warningJohannes Berg1-2/+3
When print_mac() was marked as __pure to avoid emitting a function call in pr_debug() scenarios, a warning in this code surfaced since it relies on the fact that the buffer is modified and doesn't use the return value. This patch makes it use the return value instead. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reported-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: Disallow concurrent IBSS/STA mode interfacesJohannes Berg1-4/+47
Disallow having more than one IBSS interface up at any time because of beacon distribution issues, and for now also disallow having more than one IBSS/STA interface up at the same time because we use the master interface's BSS struct which would be completely corrupted when we have more than one up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: atomically check whether STA exists alreadyJohannes Berg5-27/+36
When a STA structure is added, it is often checked whether it already exists before adding it. This, however, isn't done atomically so there is a race condition that could lead to two STA structures being added with the same MAC address. This patch changes sta_info_add() to return an ERR_PTR in case of failure and adds the failure mode -EEXIST when the STA already exists. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: rework TX filtered frame codeJohannes Berg4-51/+91
This reworks the code for TX filtered frames, splitting it out to a new function to handle those cases, making the clear instruction a flag and renaming a few things to be easier to understand and less Atheros hardware specific. Finally, it also makes the comments explain more. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: fix incorrect use of CONFIG_MAC80211_IBSS_DEBUGPavel Roskin1-1/+3
Configuration variables are only available to the preprocessor Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29p54: fix sparse warningsJohannes Berg1-2/+3
This fixes a few sparse warnings in p54. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29adm8211: fix sparse warningsJohannes Berg1-8/+4
Both of these seem to be actual errors, the first is just wrong and the second is my mistake introduced by the cfg80211 API update. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29ssb: Add support for 8bit register accessMichael Buesch4-0/+88
This adds support for 8bit wide register reads/writes. This is needed in order to support the gigabit ethernet core. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: consolidate TIM handling codeJohannes Berg5-83/+84
This consolidates all TIM handling code to avoid re-introducing errors with the bitmap/set_tim order and to reduce code. While reading the code I noticed a possible problem so I also added a comment about that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: remove sta TIM flag, fix expiry TIM handlingJohannes Berg5-25/+28
The TIM flag that is kept in each station's info is completely useless, there's no code (aside from the debugfs display code) checking it, hence it can be removed. While doing that, I noticed that the TIM handling is broken when buffered frames expire, so fix that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: invoke set_tim() callback after setting own TIM infoJohannes Berg3-8/+8
Drivers should be allowed to simply get a complete new beacon when set_tim() is invoked (and set_tim() is required for drivers that just want a beacon template!), so we need to update our own TIM bitmap before calling set_tim() so that getting the beacon will now get an already updated beacon. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 05:30:35 +0000