summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2008-07-10Merge branch 'imx' into develRussell King92-610/+13540
Conflicts: arch/arm/mm/Kconfig
2008-07-10Merge branches 'at91', 'dyntick', 'ep93xx', 'iop', 'ixp', 'misc', 'orion', ↵Russell King555-8403/+38009
'omap-reviewed', 'rpc', 'rtc' and 's3c' into devel
2008-07-10[ARM] 5171/1: ep93xx: fix compilation of modules using clocksDmitry Baryshkov1-0/+5
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-10[ARM] 5133/2: at91sam9g20 defconfig filesedji gaouaou1-0/+1168
at91sam9g20 defconfig file Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Justin Waters <justin.waters@timesys.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-10[ARM] 5130/4: Support for the at91sam9g20sedji gaouaou16-29/+342
Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed. We created a new board for this device but based the chip support directly on 9260 files with little updates. Here is the chip page on Atmel wabsite: http://atmel.com/dyn/products/product_card.asp?part_id=4337 Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Justin Waters <justin.waters@timesys.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] 5160/1: IOP3XX: gpio/gpiolib supportArnaud Patard5-0/+132
This patch brings support for gpio/gpiolib framework to Intel IOP3xx platforms. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] at91: Fix NAND FLASH timings for at91sam9x evaluation kits.Patrice Vilchez4-16/+16
New timings are based on application note "NAND Flash Support on AT91SAM9 Microcontrollers" available at http://atmel.com/dyn/resources/prod_documents/doc6255.pdf). Signed-off-by: Patrice Vilchez <patrice.vilchez@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-07[ARM] Feroceon: don't disable BPU on bootSaeed Bishara1-4/+5
On Feroceon platforms that have a branch prediction unit, bit 11 of the cp15 control register controls the BPU. This patch keeps the old value of this bit instead of always clearing it. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-07-07[ARM] Orion: LED support for HP mv2120Martin Michlmayr2-2/+47
The HP mv2120 has several LEDs that are controlled through gpio. Export the health LED, the red SATA LEDs as well as two gpios that control the brightness of _all_ LEDs to userland. The Ethernet and power LEDs can't be controlled through gpio and the blue SATA LEDs are handled via the SATA driver. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-07-07[ARM] Orion: add RD88F5181L-FXO supportNicolas Pitre3-0/+168
This patch adds support for the Marvell Orion-VoIP RD-88F5181L-FXO Reference Design, and enables use of the ethernet, USB, Cardbus and mini-PCIe ports. Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-07-07[ARM] Orion: add RD88F5181L-GE supportLennert Buytenhek3-0/+179
This patch adds support for the Marvell Orion-VoIP RD2-88F5181L-GE Reference Design, and enables use of the ethernet, USB, Cardbus and mini-PCIe ports. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-07-07[ARM] Orion: add Netgear WNR854T supportImre Kaloz3-0/+171
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-07-07Merge branch 'machtypes' into orionRussell King79-596/+994
2008-07-07[ARM] s3c2410_defconfig: update for current buildBen Dooks1-7/+27
Update the s3c2410_defconfig for the current set of added patches. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-07[ARM] Acer n30: Minor style and indentation fixes.Ben Dooks1-28/+28
Minor style fixes. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-07[ARM] Acer n30: Hardware initialisation.Christer Weinigel1-0/+139
Initialise the hardware register settings on boot, to allow the device to function correctly. Signed-off-by: Christer Weinigel <christer@weinigel.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-07[ARM] Acer n30: LCD support.Christer Weinigel1-0/+28
This patch adds the configuration needed for the LCD display on the n30. Signed-off-by: Christer Weinigel <christer@weinigel.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-07[ARM] Acer n30: Add support for n35 and related devices.Christer Weinigel2-6/+144
Add support for the Acer N35 and related devices. Signed-off-by: Christer Weinigel <christer@weinigel.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-07[ARM] Acer n30: LED support.Christer Weinigel1-0/+37
Add support for the LEDs on the Acer N30. Signed-off-by: Christer Weinigel <christer@weinigel.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-07[ARM] Acer n30: GPIO buttons supportChrister Weinigel1-0/+67
Add support for the GPIO buttons on the Acer N30. Signed-off-by: Christer Weinigel <christer@weinigel.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-07[ARM] Acer n30: USB bus pull-up support.Christer Weinigel1-0/+25
Add support for the USB D+ pull up on the Acer N30. This is needed for the USB gadget to work properly. Signed-off-by: Christer Weinigel <christer@weinigel.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-07[ARM] Acer n30: Source file cleanups.Christer Weinigel1-23/+16
Clean up some junk from the official kernel. The compile-command is something that's only useful for me personally and doesn't belong in the mainstream kernel. Signed-off-by: Christer Weinigel <christer@weinigel.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-07[ARM] S3C2443: Add prediv clk and fix setting of h and p clocksBen Dooks1-6/+33
Update the S3C2443 clock support to add the prediv clock that is sourced via a divider from msysclk. Also fix the setting of p and h clocks from this prediv clock. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-07[ARM] S3C2443: Add armdiv and arm clocksBen Dooks1-1/+53
Add the armdiv and arm clocks to the S3C2443 clock framework and ensure they are correctly setup. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-07[ARM] S3C2443: Fix s3c2443_clkcon_enable_p() using wrong register.Ben Dooks1-1/+1
s3c2443_clkcon_enable_p() was reading from the correct register S3C2443_PCLKCON, but then writing the value back to the wrong register S3C2443_HCLKCON. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-07[ARM] AT2440EVB: Add DM9000A network controller support.Ramax Lo1-0/+36
Add DM9000AEP network controller support for AT2440EVB. Signed-off-by: Ramax Lo <ramaxlo@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-07[ARM] S3C2440: Add AT2440EVB board supportRamax Lo3-0/+168
Add basic support for AT2440EVB board based on Samsung S3C2440 SoC. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Ramax Lo <ramaxlo@gmail.com>
2008-07-07Merge branches 'ns9x' and 'machtypes' into develRussell King4-64/+151
2008-07-07[ARM] mach-types updateRussell King1-17/+109
Update mach-types. Remove invalid or incorrect entries. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-05i.MX2 family: Add basic mach supportJuergen Beisert3-3/+10
This patch adds basic mach support for the mx2 processor family, based on the original freescale code and adapted to mainline kernel coding style. This part adds the global build only. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MX27 family: Add the Phytec PCM970 evaluation boardJuergen Beisert5-0/+56
The Phytec phyCORE-i.MX27 CPU module is delivered with the PCM970 baseboard by default. This patch adds support for the hardware. This code is only an empty stub; it is filled up with functionality in a later patch series. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MX27: Adding PCM038 platform supportJuergen Beisert6-0/+1255
This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MX27: Add ADS platform supportJuergen Beisert6-1/+1496
This patch adds basic support for the Freescale MX27ADS reference board. Currently only a serial console can be used. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MX2 family: Add clock handling for i.MX27 CPUJuergen Beisert2-0/+1627
Internal clock path handling for the i.MX27 CPU. Changed against the original Freescale code (and against clocklib for example): - clock rate is always calculated whenever one ask for the current rate. (means no "rate" member in the clock structure). So switching the PLL base frequency will propagate immediately to all other clocks that are depending on this frequency. TODO: - Check if the i.MX21 CPU can share the same code. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MX27 CPU: Add basic i.MX27 CPU supportJuergen Beisert6-0/+380
Add basic i.MX27 CPU support Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05MX2 add support for mx2 in i.MX serial driverSascha Hauer3-4/+181
add support for mx2 in i.MX serial driver Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05i.MX2 family: Add basic device supportJuergen Beisert2-1/+232
This patch adds a few on-chip devices for i.MX21/i.MX27 procesors. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MX2 family: Add basic mach support (headers)Juergen Beisert3-0/+353
This patch adds basic mach support for the mx2 processor family, based on the original freescale code and adapted to mainline kernel coding style. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MX2 family: Add basic mach support (sources)Juergen Beisert5-0/+152
This patch adds basic mach support for the mx2 processor family, based on the original freescale code and adapted to mainline kernel coding style. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MX2 family: Add GPIO multiplexing supportJuergen Beisert3-0/+530
This patch adds GPIO multiplexing support for the imx1/mxc2 family of procesors. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05MXC arch: Simplify architecture's irq sourcesJuergen Beisert4-67/+53
Simplify architecture's irq headers and sources, to share these files between MXC3 and MXC2. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05MX3: Adapt mx31lite to new timer init styleJuergen Beisert1-1/+12
This patch converts the external "add_mx31lite-basic_defconfig.diff" to our MXC implementation. Note: This patch fixes a board reference only. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05MX3: Add basic support for LogicPD i.MX31 LiteKitDaniel Mack6-0/+1245
This patch adds basic support for i.MX31 LiteKit by LogicPD. With printascii() in kernel/printk.c, it boots right into the rootfs-panic. Note: This is a modified version of Daniel's patch to fit into this patch stack. > On 09.06.2008, at 17:26, Russell King - ARM Linux wrote: > > > I would much prefer it if board specific includes were included by the > > code which needs them rather than in asm/arch/hardware.h.  With the > > device model, drivers shouldn't need to include any board specific > > includes - only the board specific C file should need it. > > The new version of this patch (#5102) has been uploaded to the patch > tracker this morning. Signed-off-by: Daniel Mack <daniel@caiaq.de> -- arch/arm/configs/mx31litekit_defconfig | 1100 ++++++++++++++++++++++++++++++ arch/arm/mach-mx3/Kconfig | 7 arch/arm/mach-mx3/Makefile | 1 arch/arm/mach-mx3/mx31lite.c | 96 ++ include/asm-arm/arch-mxc/board-mx31lite.h | 38 + include/asm-arm/arch-mxc/debug-macro.S | 3 6 files changed, 1245 insertions(+)
2008-07-05MX31: add basic pcm037 board supportSascha Hauer6-0/+915
This patch adds basic board support for phytecs pmc037 board. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05i.MX3: Add a basic default config for the imx31ads (reference only)Juergen Beisert1-0/+839
Currently there is a mx31ads BSP file in the kernel, but no default config file. This patch adds a basic default config for the imx31ads but it is for test purposes only to ensure the i.MX2 patch stack doesn't break the i.MX3. Note: For reference only. This configuration is untested as I have no access to an mx31ads. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05MXC: add debug-macro.S for mxcSascha Hauer2-0/+43
This patch adds debug-macro.S for arch-mxc Disadvantage: Due to the board specific UART definition, these macros (and compile time) will fail for multi board kernels. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05i.MXC family: Adding timer supportJuergen Beisert9-251/+418
This patch adds timer support for the i.MX machine family. This code can be used on the following machs: - i.MX1 (tested) - i.MX2 (i.MX21 (to be tested), i.MX27 (tested)) - i.MX3 (i.MX31 (tested)) TODO: It seems impossible to build a kernel for more than one CPU because the timer do not follow the platform device rules. So it does only work if timer 1 can be accessed on all CPUs at the same address. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05MXC: add io multiplexing functions for mx3Sascha Hauer3-1/+613
This patch adds functions to use the io multiplexer on mx3 platforms. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05MXC arch: Add gpio support for the whole platformJuergen Beisert8-1/+348
This patch bases on the one from Daniel Mack. The most important change to Daniel's patch is to be more generic. This gpio routine supports at least the i.MX27 and i.MX31 processors. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Acked-by: Daniel Mack <daniel@caiaq.de>
2008-07-05mxc: add MX3 support for i.MX internal UART driverSascha Hauer5-22/+267
This patch adds MX3 support for the i.MX internal uart driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-02 11:40:00 +0000