summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2009-09-22lis3: fix typoDaniel Mack1-1/+1
Bit 0x80 in CTRL_REG3 is an ACTIVE_LOW rather than an ACTIVE_HIGH function, I got that wrong during my last change. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22drivers/hwmon/coretemp.c: enable the Intel AtomMichael Riepe1-2/+2
Enable the coretemp driver on an Intel Atom. I'm not sure if the readings are correct, however - on my 330, the driver reports values between 27 and 41 °C (with core1 being about 8°C hotter than core0, given the same load). Maybe the maximum temperature of 100 °C is wrong for Atom CPUs. Cc: Arjan van de Ven <arjan@infradead.org> Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22checkpatch: add some common Blackfin checksMike Frysinger1-0/+22
Add checks for Blackfin-specific issues that seem to crop up from time to time. In particular, we have helper macros to break a 32bit address into the hi/lo parts, and we want to make sure people use the csync/ssync variant that includes fun anomaly workarounds. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22checkpatch: version 0.29Andy Whitcroft1-1/+1
Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22checkpatch: limit sN/uN matches to actual bit sizesAndy Whitcroft1-2/+2
Limit our type matcher to the s/u/le/be etc sizes that actually exist to prevent miss categorising s2 as a type. Fix up the spelling of the error also. Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22checkpatch: format strings should not have brackets in macrosAndy Whitcroft1-1/+2
We should not recommend braces for the following: #define pr_fmt(fmt) "%s: " fmt, __func__ allow things with double quotes round them to avoid this check. Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22checkpatch: make -f alias --file, add --help, more verbose help messageHannes Eder1-13/+42
Impact: - More verbose help/usage message. - Make the option -f an alias for --file. - On -h, --help, and --version display help message and exit(0). - With no FILE(s) given, exit(1) with "no input files". - On invalid options display help/usage and exit(1). Based on a patch by Pavel Machek. Signed-off-by: Hannes Eder <hannes@hanneseder.net> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22checkpatch: indent checks -- stop when we run out of continuation linesAndy Whitcroft1-2/+3
Ensure we terminate when there are no futher continuation lines when trying to determine relative indent of conditionals and their blocks. Reported-by: John Daiker <daikerjohn@gmail.com> Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22checkpatch: handle C99 comments correctly (performance issue)Daniel Walker1-0/+13
This fixes the sanitation process in checkpatch.pl so that it blocks out the text after a C99 style comment the same way it does with block style comments. This prevents the text from getting processed as regular code. Signed-off-by: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22checkpatch: possible types -- else cannot start a typeAndy Whitcroft1-0/+2
An else cannot start a type, it would have to be within a block after the else. This can trigger false modifier matching. Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22flex_array: add missing kerneldoc annotationsDavid Rientjes1-1/+11
Add kerneldoc annotations for function formals of type struct flex_array and gfp_t which are currently lacking. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22flex_array: introduce DEFINE_FLEX_ARRAYDavid Rientjes2-30/+36
FLEX_ARRAY_INIT(element_size, total_nr_elements) cannot determine if either parameter is valid, so flex arrays which are statically allocated with this interface can easily become corrupted or reference beyond its allocated memory. This removes FLEX_ARRAY_INIT() as a struct flex_array initializer since no initializer may perform the required checking. Instead, the array is now defined with a new interface: DEFINE_FLEX_ARRAY(name, element_size, total_nr_elements) This may be prefixed with `static' for file scope. This interface includes compile-time checking of the parameters to ensure they are valid. Since the validity of both element_size and total_nr_elements depend on FLEX_ARRAY_BASE_SIZE and FLEX_ARRAY_PART_SIZE, the kernel build will fail if either of these predefined values changes such that the array parameters are no longer valid. Since BUILD_BUG_ON() requires compile time constants, several of the static inline functions that were once local to lib/flex_array.c had to be moved to include/linux/flex_array.h. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22flex_array: add flex_array_shrink functionDavid Rientjes2-0/+41
Add a new function to the flex_array API: int flex_array_shrink(struct flex_array *fa) This function will free all unused second-level pages. Since elements are now poisoned if they are not allocated with __GFP_ZERO, it's possible to identify parts that consist solely of unused elements. flex_array_shrink() returns the number of pages freed. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22flex_array: poison free elementsDavid Rientjes2-8/+10
Newly initialized flex_array's and/or flex_array_part's are now poisoned with a new poison value, FLEX_ARRAY_FREE. It's value is similar to POISON_FREE used in the various slab allocators, but is different to distinguish between flex array's poisoned kmem and slab allocator poisoned kmem. This will allow us to identify flex_array_part's that only contain free elements (and free them with an addition to the flex_array API). This could also be extended in the future to identify `get' uses on elements that have not been `put'. If __GFP_ZERO is passed for a part's gfp mask, the poisoning is avoided. These elements are considered to be in-use since they have been initialized. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22flex_array: add flex_array_clear functionDavid Rientjes2-0/+27
Add a new function to the flex_array API: int flex_array_clear(struct flex_array *fa, unsigned int element_nr) This function will zero the element at element_nr in the flex_array. Although this is equivalent to using flex_array_put() and passing a pointer to zero'd memory, flex_array_clear() does not require such a pointer to memory that would most likely need to be allocated on the caller's stack which could be significantly large depending on element_size. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22vsprintf: use WARN_ON_ONCEMarcin Slusarz1-12/+2
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22MAINTAINERS: move ARM lists to infradeadJoe Perches1-53/+53
Signed-off-by: Joe Perches <joe@perches.com> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22MAINTAINERS: integrate P:/M: linesJoe Perches1-4/+2
A couple of new uses of separate "P: name" "M: address" lines are converted to single line "M: name <address>" Signed-off-by: Joe Perches <joe@perches.com> Cc: Anil Ravindranath <anil_ravindranath@pmc-sierra.com> Cc: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22MAINTAINERS: omap: fix regexFelipe Contreras1-1/+1
Otherwise 'arch/arm/*omap*/foo.c' wouldn't match Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22MAINTAINERS: acpi: add 'include/acpi'Felipe Contreras1-0/+1
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22scripts/get_maintainer.pl: add maintainers in order listed in matched sectionJoe Perches1-16/+54
Previous behavior was "bottom-up" in each section from the pattern "F:" entry that matched. Now information is entered into the various lists in the "as entered" order for each matched section. This also allows the F: entry to be put anywhere in a section, not just as the last entries in the section. And a couple of improvements: Don't alphabetically sort before outputting the matched scm, status, subsystem and web sections. Ignore content after a single email address so these entries are acceptable M: name <address> whatever other comment And a fix: Make an M: entry without a name again use the name from an immediately preceding P: line if it exists. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22scripts/get_maintainer.pl: add --remove-duplicatesJoe Perches1-53/+55
Allow control over the elimination of duplicate email names and addresses --remove-duplicates will use the first email name or address presented --noremove-duplicates will emit all names and addresses --remove-duplicates is enabled by default For instance: $ ./scripts/get_maintainer.pl -f drivers/char/tty_ioctl.c Greg Kroah-Hartman <gregkh@suse.de> Alan Cox <alan@linux.intel.com> Mike Frysinger <vapier@gentoo.org> Alexey Dobriyan <adobriyan@gmail.com> linux-kernel@vger.kernel.org $ ./scripts/get_maintainer.pl -f --noremove-duplicates drivers/char/tty_ioctl.c Greg Kroah-Hartman <gregkh@suse.de> Alan Cox <alan@redhat.com> Alan Cox <alan@linux.intel.com> Alan Cox <alan@lxorguk.ukuu.org.uk> Mike Frysinger <vapier@gentoo.org> Alexey Dobriyan <adobriyan@gmail.com> linux-kernel@vger.kernel.org Using --remove-duplicates could eliminate multiple maintainers that share the same name but not the same email address. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22scripts/get_maintainer.pl: using --separator implies --nomultilineJoe Perches1-0/+5
If a person sets a separator, it's only used if --nomultiline is set. Don't make the command line also include --nomultiline in that case. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22scripts/get_maintainer.pl: add .mailmap use, shell and email cleanupsJoe Perches1-7/+65
Add reading and using .mailmap file if it exists Convert address entries in .mailmap to first encountered address Don't terminate shell commands with \n Strip characters found after sign-offs by: name <address> [stripped] Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22scripts/get_maintainer.pl: better email routines, use perl not shell where ↵Joe Perches1-56/+96
possible Added format_email and parse_email routines to reduce inline use. Added email_address_inuse to eliminate multiple maintainer entries for the same email address, the first name encountered is used. Used internal perl equivalents of shell cmd use of grep|cut|sort|uniq Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22scripts/get_maintainer.pl: add --pattern-depthJoe Perches1-7/+14
--pattern-depth is used to control how many levels of directory traversal should be performed to find maintainers. default is 0 (all directory levels). For instance: MAINTAINERS currently has multiple M: and F: entries that match net/netfilter/ipvs/ip_vs_app.c IPVS M: Wensong Zhang <wensong@linux-vs.org> M: Simon Horman <horms@verge.net.au> M: Julian Anastasov <ja@ssi.bg> [...] F: net/netfilter/ipvs/ NETFILTER/IPTABLES/IPCHAINS [...] M: Patrick McHardy <kaber@trash.net> [...] F: net/netfilter/ NETWORKING [GENERAL] M: "David S. Miller" <davem@davemloft.net> [...] F: net/ THE REST M: Linus Torvalds <torvalds@linux-foundation.org> [...] F: */ Using this command will return all of those maintainers: (except Linus unless --git-chief-maintainers is specified) $ ./scripts/get_maintainer.pl --nogit -nol \ -f net/netfilter/ipvs/ip_vs_app.c Julian Anastasov <ja@ssi.bg> Simon Horman <horms@verge.net.au> Wensong Zhang <wensong@linux-vs.org> Patrick McHardy <kaber@trash.net> David S. Miller <davem@davemloft.net> Adding --pattern-depth=1 will match at the deepest level $ ./scripts/get_maintainer.pl --nogit -nol --pattern-depth=1 \ -f net/netfilter/ipvs/ip_vs_app.c Julian Anastasov <ja@ssi.bg> Simon Horman <horms@verge.net.au> Wensong Zhang <wensong@linux-vs.org> Adding --pattern-depth=2 will match at the deepest level and 1 higher $ ./scripts/get_maintainer.pl --nogit -nol --pattern-depth=2 \ -f net/netfilter/ipvs/ip_vs_app.c Julian Anastasov <ja@ssi.bg> Simon Horman <horms@verge.net.au> Wensong Zhang <wensong@linux-vs.org> Patrick McHardy <kaber@trash.net> and so on. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22scripts/get_maintainer.pl: add sections in pattern match depth orderJoe Perches1-1/+8
Before this change, matched sections were added in the order of appearance in the normally alphabetic section order of the MAINTAINERS file. For instance, finding the maintainer for drivers/scsi/wd7000.c would first find "SCSI SUBSYSTEM", then "WD7000 SCSI SUBSYSTEM", then "THE REST". before patch: $ ./scripts/get_maintainer.pl --nogit -f drivers/scsi/wd7000.c James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Miroslav Zagorac <zaga@fly.cc.fer.hr> linux-scsi@vger.kernel.org linux-kernel@vger.kernel.org get_maintainer.pl now selects matched sections by longest pattern match. Longest is the number of "/"s and any specific file pattern. This changes the example output order of MAINTAINERS to whatever is selected in "WD7000 SUBSYSTEM", then "SCSI SYSTEM", then "THE REST". after patch: $ ./scripts/get_maintainer.pl --nogit -f drivers/scsi/wd7000.c Miroslav Zagorac <zaga@fly.cc.fer.hr> James E.J. Bottomley <James.Bottomley@HansenPartnership.com> linux-scsi@vger.kernel.org linux-kernel@vger.kernel.org Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22scripts/get_maintainer.pl: add --git-blameJoe Perches1-29/+109
Julia Lawall suggested that get_maintainers.pl should have the ability to include signatories of commits that are modified by a particular patch. Vegard Nossum did something similar once. http://lkml.org/lkml/2008/5/29/449 The modified script looks the commits for all lines in the patch, and includes the "-by:" signatories for those commits. It uses the same git-min-percent, git-max-maintainers, and git-min-signatures options. git-since is ignored. It can be used independently from the --git default, so ./scripts/get_maintainers.pl --nogit --git-blame <patch> or ./scripts/get_maintainers.pl --nogit --git-blame -f <file> is acceptable. If used with -f <file>, all lines/commits for the file are checked. --git-blame can be slow if used with -f <file> --git-blame does not work with -f <directory> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22MAINTAINERS: add IPVS include filesHannes Eder1-0/+2
Signed-off-by: Hannes Eder <heder@google.com> Cc: Joe Perches <joe@perches.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22uml: fix order of pud and pmd_free()Roel Kluin1-2/+2
If pmd_alloc() fails we should only free the prior allocated pud, if pte_alloc_map() fails, we should free pmd as well. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22um: convert to asm-generic/hardirq.hChristoph Hellwig1-25/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22cpuidle: menu governor: reduce latency on exitCorrado Zoccolo1-1/+19
Move the state residency accounting and statistics computation off the hot exit path. On exit, the need to recompute statistics is recorded, and new statistics will be computed when menu_select is called again. The expected effect is to reduce processor wakeup latency from sleep (C-states). We are speaking of few hundreds of cycles reduction out of a several microseconds latency (determined by the hardware transition), so it is difficult to measure. Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Adam Belay <abelay@novell.com Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22cpuidle: fix the menu governor to boost IO performanceArjan van de Ven3-39/+229
Fix the menu idle governor which balances power savings, energy efficiency and performance impact. The reason for a reworked governor is that there have been serious performance issues reported with the existing code on Nehalem server systems. To show this I'm sure Andrew wants to see benchmark results: (benchmark is "fio", "no cstates" is using "idle=poll") no cstates current linux new algorithm 1 disk 107 Mb/s 85 Mb/s 105 Mb/s 2 disks 215 Mb/s 123 Mb/s 209 Mb/s 12 disks 590 Mb/s 320 Mb/s 585 Mb/s In various power benchmark measurements, no degredation was found by our measurement&diagnostics team. Obviously a small percentage more power was used in the "fio" benchmark, due to the much higher performance. While it would be a novel idea to describe the new algorithm in this commit message, I cheaped out and described it in comments in the code instead. [changes since first post: spelling fixes from akpm, review feedback, folded menu-tng into menu.c] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22m68k: convert to asm-generic/hardirq.hChristoph Hellwig1-10/+2
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22m68k: convert to use arch_gettimeoffset()john stultz2-68/+8
Convert m68k to use GENERIC_TIME via the arch_getoffset() infrastructure, reducing the amount of arch specific code we need to maintain. I've taken my best swing at converting this, but I'm not 100% confident I got it right. My cross-compiler is now out of date (gcc4.2) so I wasn't able to check if it compiled. Any assistance from arch maintainers or testers to get this merged would be great. Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22m32r: convert to asm-generic/hardirq.hChristoph Hellwig1-13/+2
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22m32r: convert to use arch_gettimeoffset()john stultz2-71/+9
Convert m32r to use GENERIC_TIME via the arch_getoffset() infrastructure, reducing the amount of arch specific code we need to maintain. I also noted that m32r doesn't seem to be taking the xtime write lock before calling do_timer()! That looks like a pretty bad bug to me. If folks agree, let me know and I can move the lock grab to the correct spot. Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22m32r: remove redundant tests on unsignedRoel Kluin2-4/+3
`off' and `max_cpus' are unsigned. When negative they are wrapped and caught by the other test. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22alpha: convert to asm-generic/hardirq.hChristoph Hellwig1-11/+3
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22alpha: use printk_onceMarcin Slusarz1-5/+1
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22arch/alpha/boot/tools/objstrip.c: wrong variable tested after open()Roel Kluin1-1/+1
The incorrect variable is tested. fd is used for another open() and is already tested. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22alpha: convert to use arch_gettimeoffset()john stultz2-72/+15
Converts alpha to use GENERIC_TIME via the arch_getoffset() infrastructure, reducing the amount of arch specific code we need to maintain. I suspect the alpha arch could even be further improved to provide and rpcc() based clocksource, but not having the hardware, I don't feel comfortable attempting the more complicated conversion (but I'd be glad to help if anyone else is interested). [akpm@linux-foundation.org: fix build] Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22h8300: convert to asm-generic/hardirq.hChristoph Hellwig2-17/+3
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22nommu: add support for Memory Protection Units (MPU)Bernd Schmidt2-0/+26
Some architectures (like the Blackfin arch) implement some of the "simpler" features that one would expect out of a MMU such as memory protection. In our case, we actually get read/write/exec protection down to the page boundary so processes can't stomp on each other let alone the kernel. There is a performance decrease (which depends greatly on the workload) however as the hardware/software interaction was not optimized at design time. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22pcmcia: cleanup/fixup patch for sa1100_jornada_pcmcia driverKristoffer Ericson1-71/+85
Clean up the /drivers/pcmcia/sa1100_jornada.c file with respect to formatting. It also changes a build warning into a code comment (since its a pain to watch every build and havent seen any problems with driver in 3.5years). Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22pcmcia: switch /proc/bus/pccard/drivers to seq_fileAlexey Dobriyan1-16/+20
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22pcmcia: fix read buffer overflowRoel Kluin1-1/+1
If count > 0 and dev->rlen == dev->rpos and dev->proto == 0 then we read and write dev->rbuf[-1]; Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Harald Welte <laforge@gnumonks.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22pcmcia: yenta: add missing __devexit markingMike Frysinger1-1/+1
The remove member of the pci_driver yenta_cardbus_driver uses __devexit_p(), so the remove function itself should be marked with __devexit. Even more so considering the probe function is marked with __devinit. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Daniel Ritz <daniel.ritz-ml@swissonline.ch> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22mm: reduce atomic use on use_mm fast pathMichael S. Tsirkin1-3/+6
When the mm being switched to matches the active mm, we don't need to increment and then drop the mm count. In a simple benchmark this happens in about 50% of time. Making that conditional reduces contention on that cacheline on SMP systems. Acked-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22mm: move use_mm/unuse_mm from aio.c to mm/Michael S. Tsirkin4-47/+66
Anyone who wants to do copy to/from user from a kernel thread, needs use_mm (like what fs/aio has). Move that into mm/, to make reusing and exporting easier down the line, and make aio use it. Next intended user, besides aio, will be vhost-net. Acked-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 19:00:31 +0000