summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-03-27bcma: export some gpio functionsHauke Mehrtens1-0/+2
These functions will be used by brcmsmac. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27bcma: export bcma_chipco_get_alp_clock()Hauke Mehrtens2-1/+4
This function will be used by brcmsmac. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27bcma: handle more devices in bcma_pmu_get_alp_clock()Hauke Mehrtens2-4/+21
Add some more chip IDs to bcma_pmu_get_alp_clock() Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27bcma: use BCMA_CC_PMU_CTL_* constantsHauke Mehrtens1-5/+5
Instead of hard coding these values use the existing constants. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27bcma: mark eromptr as __iomemHauke Mehrtens1-8/+8
This fixes some sparse warnings. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27Show actual timeout value in failed calibration messages.Robert Shade2-4/+8
The messages are currently hard coding "1ms", which does not match the actual timeout being used. Signed-off-by: Robert Shade <robert.shade@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27carl9170: remove fast channel change featureChristian Lamparter4-66/+27
Marco Fonseca reported a issue with his carl9170 device: "I'm seeing a problem with the carl driver. If I change channels repeatedly on the 2.4ghz band, monitoring (e.g. tcpdump) will eventually halt. I've seen this on various versions of the carl driver/firmware (both from 1.9.4 to 1.9.7)" <http://marc.info/?l=linux-wireless&m=136381302428113> The culprit was identified as "fast channel change feature" which according to Adrian Chadd is: "... notoriously unreliable and really only fully debugged on some very later chips." <http://marc.info/?l=linux-wireless&m=136416984531380> Therefore, this patch removes the fast channel change feature. The phy will now always have to go through a cold reset when changing channels, but it should no longer become deaf. Cc: Marco Fonseca <marco@tampabay.rr.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27mwl8k: always apply configuration even when device is idleJonas Gorski1-6/+4
Fix settings not being applied when the device is idle and the firmware gets reloaded (because of changing from STA to AP mode). This caused the device using the wrong channel (and likely band), e.g. a 5 GHz only card still defaulted to channel 6 in the 2.4 GHz band when left unconfigured. This issue was always present, but only made visible with "mwl8k: Do not call mwl8k_cmd_set_rf_channel unconditionally" (0f4316b9), since before that the channel was (re-)configured at the next _config call even when it did not change from the mac80211 perspective. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: add support for adhoc modeHauke Mehrtens3-4/+20
This adds adhoc mode support to brcmsmac. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: activate AP supportHauke Mehrtens3-4/+26
This activates the AP mode support. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: deactivate ucode sending probe responsesHauke Mehrtens3-1/+24
It is possible to configure the ucode to automatically send the probe responses to the clients after they send a probe request. At least for WPS the userspace needs to answer the probe requests and we do not know a way to say to the ucode to just handle the normal probe requests, so for now no probe requests should be handled by the ucode. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: add support for probe response templateHauke Mehrtens4-84/+42
The ucode is able to answer probe response by itself. This writes such a template into the specific memory. Currently the probe requests are also send to mac80211 so there are more answers send to a requesting client. We have to make the ucode stop sending probe requests to the driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: react on changing SSIDHauke Mehrtens3-0/+17
To send the correct probe response the hardware needs to know the SSID when it changed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: add beacon template supportHauke Mehrtens4-6/+159
This makes it possible that a beacon template provided by mac80211 is written to the hardware for constant beaconing. This is based on an old version of brcmsmac, on b43 and the spec b43 is based on. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: write beacon period to hardwareHauke Mehrtens1-0/+10
Make brcms_c_set_beacon_period() write the beacon period to the hardware if a new one is set. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: remove brcms_pub->bcmerrHauke Mehrtens2-3/+0
This was a write only member Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: remove brcms_bss_cfg->cur_etheraddrHauke Mehrtens2-3/+2
use brcms_pub->cur_etheraddr instead Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: remove brcms_bss_cfg->upHauke Mehrtens2-7/+5
This was a read only member, replace it with pub->up. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: remove brcms_bss_cfg->enableHauke Mehrtens2-5/+2
This was a read only member. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: remove brcms_bss_cfg->associatedHauke Mehrtens2-11/+3
Replaced the usage with pub->associated. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: remove brcms_bss_cfg->BSSHauke Mehrtens2-16/+9
This was a read only member. The checks using BSS are replaced by better fitting checks of the new type member. The change in brcms_c_tbtt() was based on code from b43, in brcms_c_ps_allowed() the same happens with BSS being true or false, beaconing and probe responses are just needed in ap mode. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: add interface type to brcms_bss_cfgHauke Mehrtens4-1/+17
This makes it possible to easily check in which mode the device is currently running. This also adds a function to start station mode. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: implement ieee80211_ops get_tsf and set_tsfHauke Mehrtens4-0/+71
setting the tsf is needed to start a timer to make beaconing in AP mode work. This is based on older versions of brcmsmac and b43. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27b43: use constantsHauke Mehrtens2-7/+11
Instead of defining the magic values in the code use constants. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27mwifiex: use fw_status register to wake up PCIe cardAvinash Patil1-13/+24
FW can be woken up even by accessing device registers; we need not explicitily enable interrupts for doing this. Future PCIe devices will not be woken up by writing to host registers. This patch enables driver to wake up device by reading FW status register. Also devices with sleep cookie enabled need some more time before proceeding with processing. Handle this by adding a delay loop. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27mwifiex: avoid waking up device in awake stateAvinash Patil1-3/+4
We have received interrupt from device means FW is not sleeping. In this case make sure wakeup handler for PCIe is not invoked by setting adapter->pm_wakeup_fw_try to false. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27mwifiex: do not enable PCIe interrupt in Power Save sleep stateAvinash Patil1-1/+2
Enabling PCIe host interrupt may accidently wake up the card when it's in sleep. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27brcmsmac: Remove unused macro SI_MSGJoe Perches1-6/+0
commit 6236dc2e2 ("brcmsmac: remove some redundant chip common workarounds") removed the last uses. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27ath9k: trivial: change spectral relayfs bufferingZefir Kurtisi1-1/+1
The spectral data provided via relay-fs introduces a buffering latency given by the subbuf_size. To meet the requirements for delay-sensitive applications (like real-time spectral plotter), reduce subbuf_size and increase n_subbufs. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25b43: remove warning for LP-PHY with sprom < 8Hauke Mehrtens1-9/+3
The BCM5354 SoC has a build in ieee80211 core rev 13 with a LP-PHY on it. This devices has a sprom version 3 stored in the nvram. This patch removes the warning and uses the opo values from the sprom as mentioned in the specs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25ssb: read additional sprom v2 and v3 attributes.Hauke Mehrtens1-2/+18
These attributes should be in the sprom for rev 2 and 3, but they were not read out. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25ssb: fix sprom constant for ant_available_{bg,a}Hauke Mehrtens1-5/+5
This was done accordingly to new specs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25b43: use bcma_chipco_gpio_control()Hauke Mehrtens1-5/+2
With this patch the same registers are written, but this access is now protected by a lock. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25bcma: define board typesRafał Miłecki1-0/+54
Using that IDs we can write workarounds for various cards Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25ssb: define more board typesRafał Miłecki1-3/+51
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25bcma: extract board_type from SPROMRafał Miłecki1-0/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25ssb: extract board_type from SPROMRafał Miłecki1-0/+3
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25mwifiex: add support to configure VHT for AP modeYogesh Ashok Powar9-0/+129
Currently, default VHT configuration from the firmware is used for the VHT operations. Adding vhtcfg command to configure the firmware based on input received from cfg. Enable VHT for AP mode only when cfg80211_ap_settings has a VHT IE i.e., when ieee80211ac is set to 1 in the hostapd.conf. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25rtlwifi: usb: add NET_IP_ALIGN padding to RX skb when neededJussi Kivilinna1-1/+40
Add proper alignment at first packet copy, to avoid extra copies made later in networking stack. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25rtlwifi: usb: defer rx processing to taskletJussi Kivilinna3-15/+51
Move processing of received packets to tasklet from hard-irq context. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25rtlwifi: usb: remove extra skb copy on RX pathJussi Kivilinna1-15/+4
RX path has extra copying of packets, that can be avoided. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25rtlwifi: usb: use usb_alloc_coherent for RX buffersJussi Kivilinna2-47/+68
Use dedicated DMA coherent buffers for RX urbs, to avoid allocation of large skbuffs in hard-irq context and improve performance. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25Merge branch 'for-linville' of ↵John W. Linville17-130/+330
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
2013-03-25Merge branch 'for-upstream' of ↵John W. Linville21-989/+1329
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2013-03-25Merge branch 'for-john' of ↵John W. Linville21-253/+195
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-03-25Merge branch 'for-john' of ↵John W. Linville37-257/+374
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-03-25Merge branch 'wl12xx-next' into for-linvilleLuciano Coelho17-130/+330
2013-03-25wlcore: move handling from hardirq to the irq thread functionLuciano Coelho1-32/+21
Spin locks and completions are expensive in hard IRQ context and cause problems with RT kernels. In RT kernels, both spin locks and completions can schedule(), so we can't use them in hard irq context. Move handling code into the irq thread function to avoid that. Reported-by: Gregoire Gentil <gregoire@alwaysinnovating.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-03-25wlcore: use print_hex_dump_debug()Luciano Coelho1-17/+16
We were printing out all the hex dumps regardless of whether dynamic debugging was enabled or not. Now that print_hex_dump_debug() has been implemented, we can use that instead. Reported-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-03-25wlcore: consider dummy packets when tx queues are emptyArik Nemtsov1-1/+1
Don't ignore dummy packets when our queues are empty. This causes dummy packets never to be sent when traffic is not suspended by FW thresholds, which happens only in high Tx throughput situations. This may hurt Rx performance. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-03 07:35:07 +0000