summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2007-04-29Merge branch 'upstream-linus' of ↵Linus Torvalds170-6144/+29413
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (107 commits) smc911x: fix compilation breakage wjen debug is on [netdrvr] eexpress: minor corrections add NAPI support to sb1250-mac.c ixgb: ROUND_UP macro cleanup in drivers/net/ixgb e1000: ROUND_UP macro cleanup in drivers/net/e1000 Generic HDLC sparse annotations e100: Optionally use I/O mode only to access register space e100: allow bad MAC address when running with invalid eeprom csum ehea: fix for dlpar support ehea: fix for sysfs entries 3C509: Remove unnecessary include of <linux/pm_legacy.h> NetXen: Fix for vmalloc issues NetXen: Fixes for Power PC architecture NetXen: Port swap feature for multi port cards NetXen: Removal of redundant macros NetXen: Multi PCI support for Quad cards NetXen: Removal of redundant argument passing NetXen: Use multiple PCI functions [netdrvr e100] experiment with doing RX in a similar manner to eepro100 [PATCH] ieee80211: add missing global needed by IEEE80211_DEBUG_XXXX ...
2007-04-29Merge branch 'upstream-linus' of ↵Linus Torvalds80-3318/+3656
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (86 commits) SPIN_LOCK_UNLOCKED cleanup in drivers/ata/pata_winbond.c drivers/ata/pata_cmd640.c: fix build with CONFIG_PM=n pata_hpt37x: Further small fixes pata_hpt3x2n: Add HPT371N support and other bits ata: printk warning fixes libata: separate ATA_EHI_DID_RESET into DID_SOFTRESET and DID_HARDRESET ahci: consolidate common port flags ata_timing: ensure t->cycle is always correct libata: add missing call to ->cable_detect() in new EH path pata_amd: remove contamination added during cable_detect conversion libata: Handle drives that require a spin-up command before first access libata: HPA support libata: kill probe_ent and related helpers libata: convert the remaining PATA drivers to new init model libata: convert the remaining SATA drivers to new init model libata: convert ata_pci_init_native_mode() users to new init model libata: convert drivers with combined SATA/PATA ports to new init model libata: add init helpers including ata_pci_prepare_native_host() libata: convert native PCI host handling to new init model libata: convert legacy PCI host handling to new init model ...
2007-04-29Merge branch 'release' of ↵Linus Torvalds36-4729/+8496
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (105 commits) sonypi: use mutex instead of semaphore sony-laptop: remove user visible camera controls as platform attributes meye: make meye use sony-laptop instead of sonypi sony-laptop: add a meye-usable include file for camera ops sony-laptop: complete the motion eye camera support in sony-laptop sonypi: try to detect if sony-laptop has already taken one of the known ioports sonypi: suggest sonypi users to try sony-laptop instead sony-laptop: add edge modem support (also called WWAN) sony-laptop: add locking on accesses to the ioport and global vars sony-laptop: add camera enable/disable parameter, better handle possible infinite loop thinkpad-acpi: make drivers/misc/thinkpad_acpi:fan_mutex static ACPI: thinkpad-acpi: add sysfs support to wan and bluetooth subdrivers ACPI: thinkpad-acpi: add sysfs support to hotkey subdriver ACPI: thinkpad-acpi: improve dock subdriver initialization ACPI: thinkpad-acpi: improve debugging for acpi helpers ACPI: thinkpad-acpi: improve fan control documentation ACPI: thinkpad-acpi: map ENXIO to EINVAL for fan sysfs ACPI: thinkpad-acpi: fix a fan watchdog invocation ACPI: thinkpad-acpi: do not arm fan watchdog if it would not work ACPI: thinkpad-acpi: add a fan-control feature master toggle ...
2007-04-28Pull bugzilla-8346 into release branchLen Brown1-0/+12
2007-04-28Pull sbs into release branchLen Brown5-1040/+682
2007-04-28Pull dock into release branchLen Brown1-0/+25
2007-04-28Pull ec into release branchLen Brown2-321/+181
2007-04-28Pull misc-for-upstream into release branchLen Brown13-38/+65
2007-04-28Pull thinkpad into release branchLen Brown9-3011/+5364
Conflicts: drivers/misc/Kconfig Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28Pull sony into release branchLen Brown9-263/+2072
2007-04-28Pull asus into release branchLen Brown1-56/+95
2007-04-28sonypi: use mutex instead of semaphoreMatthias Kaehlcke1-10/+10
the Sony Programmable I/O Control driver uses a semaphore as mutex. use the mutex API instead of the (binary) semaphore Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Acked-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28sony-laptop: remove user visible camera controls as platform attributesmalattia@linux.it1-36/+0
Avoid giving the user the possibility to shoot his own foot and let the meye driver enable/disable the camera wisely (PCI_ID based). Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28meye: make meye use sony-laptop instead of sonypimalattia@linux.it4-39/+38
Change sonypi_camera_command() calls to sony_pic_camera_command() and use the renamed macros. Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28sony-laptop: add a meye-usable include file for camera opsmalattia@linux.it2-8/+43
Copy and rename (for easier co-existence) the MEYE-wise exported interface. Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28sony-laptop: complete the motion eye camera support in sony-laptopmalattia@linux.it1-18/+90
Add the exported sony_pic_camera_command() function to make the MEYE driver happy. Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28sonypi: try to detect if sony-laptop has already taken one of the known ioportsmalattia@linux.it2-2/+29
Get the IO resources list in sony-laptop in the same order as listed in sonypi and make sonypi check if one of those is already busy. The sonypi check can be disabled by a module parameter in case the user thinks we are plainly wrong (check_ioport=0). Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28sonypi: suggest sonypi users to try sony-laptop insteadmalattia@linux.it1-0/+6
Try to migrate sonypi users to sony-laptop gracefully. Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28sony-laptop: add edge modem support (also called WWAN)malattia@linux.it1-0/+41
Some SZ Vaios have a gsm built-in modem. Allow powering on/off this device. Thanks to Joshua Wise for the base code. Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28sony-laptop: add locking on accesses to the ioport and global varsmalattia@linux.it1-12/+31
Better avoid having ioport commands mixing and global variables reading/writing. Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28sony-laptop: add camera enable/disable parameter, better handle possible ↵malattia@linux.it1-15/+36
infinite loop Use a parameter to enable/disable motion eye camera (for C1VE/C1VN models) controls and avoid entering an infinite loop if the camera is not present and the HW doesn't answer as we expect on io commands. Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28thinkpad-acpi: make drivers/misc/thinkpad_acpi:fan_mutex staticAdrian Bunk1-1/+1
This patch makes the needlessly global fan_mutex static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28ACPI: thinkpad-acpi: add sysfs support to wan and bluetooth subdriversHenrique de Moraes Holschuh3-23/+186
Add support to sysfs to the wan and bluetooth subdrivers. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28ACPI: thinkpad-acpi: add sysfs support to hotkey subdriverHenrique de Moraes Holschuh3-11/+176
Add the hotkey sysfs support. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28ACPI: thinkpad-acpi: improve dock subdriver initializationHenrique de Moraes Holschuh1-28/+50
The dock sub-driver has split-personality (two subdrivers), and it was doing some unoptimal things on init because of that. Fix it so that the second half of it will only init when necessary, and only if the first half initialized sucessfully in the first place. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28ACPI: thinkpad-acpi: improve debugging for acpi helpersHenrique de Moraes Holschuh1-11/+20
Some issues with the dock subdriver proved that a slightly improved debugging setup for ACPI notifiers and handler helpers would be useful. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28ACPI: thinkpad-acpi: improve fan control documentationHenrique de Moraes Holschuh1-5/+13
Improve fan control documentation and fix one mistake. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28ACPI: thinkpad-acpi: map ENXIO to EINVAL for fan sysfsHenrique de Moraes Holschuh1-2/+6
Currently, all fan control operations return ENXIO if unsupported operations are requested, but return EINVAL if invalid fan modes are requested on a given ThinkPad. This is not strictly correct for sysfs, so map ENXIO to EINVAL in the sysfs attribute store handlers, as we do benefit from the ENXIO in other parts of the driver code. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28ACPI: thinkpad-acpi: fix a fan watchdog invocationHenrique de Moraes Holschuh1-2/+3
The fan control watchdog was being called in one place even when the fan control operation had failed. Fix it. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28ACPI: thinkpad-acpi: do not arm fan watchdog if it would not workHenrique de Moraes Holschuh1-0/+3
Do not enable/rearm the fan control safety watchdog if we would not be able to do anything to the fan anyway. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28ACPI: thinkpad-acpi: add a fan-control feature master toggleHenrique de Moraes Holschuh3-9/+38
Len Brown considers that an active by default fan control interface in laptops may be too close to giving users enough rope. There is a good chance he is quite correct on this, especially if someone decides to use that interface in applets and users are not aware of its risks. This patch adds a master switch to thinkpad-acpi that enables or disables the entire fan-control feature as a module parameter: "fan_control". It defaults to disabled. Set it to non-zero to enable fan control. Also, the patch removes the expermiental status from fan control, since it is stable enough to not be called experimental, and the master switch makes it safe enough to do so. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28ACPICA: clear fields reserved before FADT r3Bob Moore1-0/+12
Linux-2.6.21 stopped booting on a P4/HT because Linux wrote the FADT.CST_CNT value to the SMI_CMD. Apparently this stumbled over some SMM instability, such as confusing SMM when invoking it from cpu1. Linux did this because even though the r2 FADT reserves the CST_CNT field, this BIOS set that field and Linux used it. Turns out that up through 2.6.20 we explicitly cleared cst_control for r2 FADTs. So here we go back to doing that, plus also clear some additional fields that are reserved until FADT r3. http://bugzilla.kernel.org/show_bug.cgi?id=8346 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-28SPIN_LOCK_UNLOCKED cleanup in drivers/ata/pata_winbond.cMilind Arun Choudhary1-1/+1
remove SPIN_LOCK_UNLOCKED, use DEFINE_SPINLOCK instead Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28drivers/ata/pata_cmd640.c: fix build with CONFIG_PM=nAndrew Morton1-0/+8
This is grubby, but all the ata drivers do it this way. Would it not be better to do #define ata_scsi_device_resume NULL in libata.h, remove all those ifdefs? (updated version, ug, ug) Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28pata_hpt37x: Further small fixesAlan Cox1-14/+9
Further HPT37x changes - No 66MHz 370/370A - Remove dead special case check now we use the DPLL (as per the IDE driver) Pointed out by Sergei Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28pata_hpt3x2n: Add HPT371N support and other bitsAlan Cox1-7/+38
Yes its no longer 3x2n but 3xxn, I can rename it if you want Jeff - Don't reset both ports each time (Sergei) - If we can't get a DPLL then abort entirely - Use ioport access for clock (from drivers/ide) - Add HPT371N support (from drivers/ide) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28ata: printk warning fixesAndrew Morton1-6/+9
drivers/ata/libata-core.c: In function 'ata_hpa_resize': drivers/ata/libata-core.c:986: warning: format '%lld' expects type 'long long int', but argument 5 has type 'u64' drivers/ata/libata-core.c:986: warning: format '%lld' expects type 'long long int', but argument 6 has type 'u64' drivers/ata/libata-core.c:990: warning: format '%lld' expects type 'long long int', but argument 4 has type 'u64' drivers/ata/libata-core.c:990: warning: format '%lld' expects type 'long long int', but argument 5 has type 'u64' drivers/ata/libata-core.c:1003: warning: format '%lld' expects type 'long long int', but argument 4 has type 'u64' Also fix various 80-col bustage. Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: separate ATA_EHI_DID_RESET into DID_SOFTRESET and DID_HARDRESETTejun Heo2-5/+10
Separate ATA_EHI_DID_RESET into ATA_EHI_DID_SOFTRESET and ATA_EHI_DID_HARDRESET. ATA_EHI_DID_RESET is redefined as OR of the two flags. This patch doesn't introduce any behavior change. This will be used later to determine whether _SDD is necessary or not. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28ahci: consolidate common port flagsTejun Heo1-19/+10
Consolidate common port flags into AHCI_FLAG_COMMON. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28ata_timing: ensure t->cycle is always correctAlan Cox1-0/+6
Russell King hit a case where quantisation errors accumulated such that the cycle time was shorter than rather than equal to the active/recovery time. The code already knows how to stretch times to fit the cycle time but does not know about the reverse. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: add missing call to ->cable_detect() in new EH pathTejun Heo1-0/+4
->cable_detect() used to be called on by the old ata_bus_probe() path. Add invocation to ata_eh_revalidate_and_attach() right after IDENTIFYs are done. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28pata_amd: remove contamination added during cable_detect conversionTejun Heo1-5/+0
This is added by added by cff63dfceb52c564fe1ba5394d50ab7d599a11b9 - pata: cable methods. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: Handle drives that require a spin-up command before first accessMark Lord2-1/+29
(S)ATA drives can be configured for "power-up in standby", a mode whereby a specific "spin up now!" command is required before the first media access. Currently, a drive with this feature enabled can not be used at all with libata, and once in this mode, the drive becomes a doorstop. The older drivers/ide subsystem at least enumerates the drive, so that it can be woken up after the fact from a userspace HDIO_* command, but not libata. This patch adds support to libata for the "power-up in standby" mode where a "spin up now!" command (SET_FEATURES) is needed. With this, libata will recognize such drives, spin them up, and then re-IDENTIFY them if necessary to get a full/complete set of drive features data. Drives in this state are determined by looking for special values in id[2], as documented in the current ATA specs. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: HPA supportAlan Cox3-0/+212
Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: kill probe_ent and related helpersTejun Heo4-281/+0
All drivers are converted to new init model. Kill probe_ent, ata_device_add() and ata_pci_init_native_mode(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: convert the remaining PATA drivers to new init modelTejun Heo13-429/+362
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf, pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x, pata_platform, pata_qdi, pata_scc and pata_winbond to new init model. * init_one()'s now follow more consistent init order * cs5520 now registers one host with two ports, not two hosts. If any of the two ports are disabled, it's made dummy as other drivers do. Tested pdc_adma and pata_legacy. Both are as broken as before. The rest are compile tested only. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: convert the remaining SATA drivers to new init modelTejun Heo9-657/+444
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: convert ata_pci_init_native_mode() users to new init modelTejun Heo3-132/+80
Convert drivers which use ata_pci_init_native_mode() to new init model. ata_pci_init_native_host() is used instead. sata_nv, sata_uli and sata_sis are in this category. Tested on nVidia Corporation CK804 Serial ATA Controller [10de:0054] in both BMDMA and ADMA mode. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: convert drivers with combined SATA/PATA ports to new init modelTejun Heo2-250/+187
Convert sata_via and sata_promise to new init model. Both controllers can have combined configuration (SATA + PATA) and used twisted initialization method (modifying port in ->port_start) to overcome probe_ent limitations. This patch converts both drivers to new init model in which such configuration is natively supported. * promise: Combined pata port now uses separate port_info entry right after the sata counterpart entry. * promise: Controller configuration is discerned using ap->flags. This simplifies init path and makes it look more like other LLDs. * via: Both SATA and PATA ports in vt6421 are represented in their own port_info structure. Tested on PDC20375 (SATA150 TX2plus) [105a:3375] and PDC40775 (SATA 300 TX2plus) [105a:3d73]. Couldn't test via cuz my c3 won't boot the current kernel. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: add init helpers including ata_pci_prepare_native_host()Tejun Heo3-2/+76
These will be used to convert LLDs to new init model. * Add irq_handler field to port_info. In new init model, requesting IRQ is LLD's responsibility and libata doesn't need to know about irq_handler. Most LLDs can simply register their irq_handler but some need different irq_handler depending on specific chip. The added port_info->irq_handler field can be used by LLDs to select the matching IRQ handler in such cases. * Add ata_dummy_port_info. * Implement ata_pci_prepare_native_host(), a helper to alloc ATA host, acquire all resources and init the host in one go. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-11 06:59:18 +0000