summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-09-01Introduce [compat_]save_altstack_ex() to unbreak x86 SMAPAl Viro4-4/+19
For performance reasons, when SMAP is in use, SMAP is left open for an entire put_user_try { ... } put_user_catch(); block, however, calling __put_user() in the middle of that block will close SMAP as the STAC..CLAC constructs intentionally do not nest. Furthermore, using __put_user() rather than put_user_ex() here is bad for performance. Thus, introduce new [compat_]save_altstack_ex() helpers that replace __[compat_]save_altstack() for x86, being currently the only architecture which supports put_user_try { ... } put_user_catch(). Reported-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org> # v3.8+ Link: http://lkml.kernel.org/n/tip-es5p6y64if71k8p5u08agv9n@git.kernel.org
2013-09-01x86, smap: Handle csum_partial_copy_*_user()H. Peter Anvin2-7/+27
Add SMAP annotations to csum_partial_copy_to/from_user(). These functions legitimately access user space and thus need to set the AC flag. TODO: add explicit checks that the side with the kernel space pointer really points into kernel space. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/n/tip-2aps0u00eer658fd5xyanan7@git.kernel.org Cc: <stable@vger.kernel.org> # v3.7+
2013-08-25Linux 3.11-rc7v3.11-rc7Linus Torvalds1-1/+1
2013-08-25Merge tag 'staging-3.11-rc7' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are two tiny staging tree fixes (well, one is for an iio driver, but those updates come through the staging tree due to dependancies) One fixes a problem with an IIO driver, and the other fixes a bug in the comedi driver core" * tag 'staging-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: bug-fix NULL pointer dereference on failed attach iio: adjd_s311: Fix non-scan mode data read
2013-08-25Merge tag 'usb-3.11-rc7' of ↵Linus Torvalds3-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are two USB fixes for 3.11-rc7 One fixes a reported regression in the OHCI driver, and the other fixes a reported build breakage in the USB phy drivers" * tag 'usb-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: phy: fix build breakage USB: OHCI: add missing PCI PM callbacks to ohci-pci.c
2013-08-25Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds3-4/+9
Pull ARM fixes from Russell King: "This round of fixes is smaller than previous: a couple more updates for the security fixes, and a one-liner kexec fix" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7816/1: CONFIG_KUSER_HELPERS: fix help text ARM: 7815/1: kexec: offline non panic CPUs on Kdump panic ARM: 7819/1: fiq: Cast the first argument of flush_icache_range()
2013-08-25Merge branch 'for-linus' of ↵Linus Torvalds8-19/+17
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "Assorted fixes from the last week or so" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: collect_mounts() should return an ERR_PTR bfs: iget_locked() doesn't return an ERR_PTR efs: iget_locked() doesn't return an ERR_PTR() proc: kill the extra proc_readfd_common()->dir_emit_dots() cope with potentially long ->d_dname() output for shmem/hugetlb
2013-08-24Merge tag 'acpi-3.11-rc7' of ↵Linus Torvalds1-8/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "I really hoped that it wouldn't be necessary to change anything in ACPI at this point, but it turns out that we need to revert one more ACPI video commit causing trouble. This reverts a change in the ACPI video driver that caused the ACPI backlight initialization to be carried out even if acpi_backlight=vendor is passed in the kernel command line which turns out to break things at least on one system" * tag 'acpi-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI / video: Always call acpi_video_init_brightness() on init"
2013-08-24Merge tag 'scsi-fixes' of ↵Linus Torvalds6-19/+110
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of small bug fixes for lpfc and zfcp and a fix for a fairly nasty bug in sg where a process which cancels I/O completes in a kernel thread which would then try to write back to the now gone userspace and end up writing to a random kernel address instead" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] zfcp: remove access control tables interface (keep sysfs files) [SCSI] zfcp: fix schedule-inside-lock in scsi_device list loops [SCSI] zfcp: fix lock imbalance by reworking request queue locking [SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal [SCSI] lpfc: Don't force CONFIG_GENERIC_CSUM on
2013-08-24ARC: [lib] strchr breakage in Big-endian configurationJoern Rennecke1-0/+10
For a search buffer, 2 byte aligned, strchr() was returning pointer outside of buffer (buf - 1) ------------->8---------------- // Input buffer (default 4 byte aigned) char *buffer = "1AA_"; // actual search start (to mimick 2 byte alignment) char *current_line = &(buffer[2]); // Character to search for char c = 'A'; char *c_pos = strchr(current_line, c); printf("%s\n", c_pos) --> 'AA_' as oppose to 'A_' ------------->8---------------- Reported-by: Anton Kolesov <Anton.Kolesov@synopsys.com> Debugged-by: Anton Kolesov <Anton.Kolesov@synopsys.com> Cc: <stable@vger.kernel.org> # [3.9 and 3.10] Cc: Noam Camus <noamc@ezchip.com> Signed-off-by: Joern Rennecke <joern.rennecke@embecosm.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-24VFS: collect_mounts() should return an ERR_PTRDan Carpenter1-1/+1
This should actually be returning an ERR_PTR on error instead of NULL. That was how it was designed and all the callers expect it. [AV: actually, that's what "VFS: Make clone_mnt()/copy_tree()/collect_mounts() return errors" missed - originally collect_mounts() was expected to return NULL on failure] Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-24bfs: iget_locked() doesn't return an ERR_PTRDan Carpenter1-1/+1
iget_locked() returns a NULL on error, it doesn't return an ERR_PTR. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-24efs: iget_locked() doesn't return an ERR_PTR()Dan Carpenter1-1/+1
The iget_locked() function returns NULL on error and never an ERR_PTR. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-24proc: kill the extra proc_readfd_common()->dir_emit_dots()Oleg Nesterov1-2/+0
proc_readfd_common() does dir_emit_dots() twice in a row, we need to do this only once. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-24cope with potentially long ->d_dname() output for shmem/hugetlbAl Viro4-14/+14
dynamic_dname() is both too much and too little for those - the output may be well in excess of 64 bytes dynamic_dname() assumes to be enough (thanks to ashmem feeding really long names to shmem_file_setup()) and vsnprintf() is an overkill for those guys. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-23Merge branch 'for-3.11-fixes' of ↵Linus Torvalds3-10/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "This contains three commits all of which are updates for specific devices which aren't too widespread. Pretty limited scope and nothing too interesting or dangerous" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: sata_fsl: save irqs while coalescing libata: apply behavioral quirks to sil3826 PMP sata, highbank: fix ordering of SGPIO signals
2013-08-23Merge branch 'for-3.11-fixes' of ↵Linus Torvalds1-5/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "A late fix for cgroup. This fixes a behavior regression visible to userland which was created by a commit merged during -rc1. While the behavior change isn't too likely to be noticeable, the fix is relatively low risk and we'll need to backport it through -stable anyway if the bug gets released" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: fix a regression in validating config change
2013-08-23Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds18-49/+114
Pull drm fixes from Dave Airlie: "Ben was on holidays for a week so a few nouveau regression fixes backed up, but they all seem necessary. Otherwise one i915 and one gma500 fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: gma500: Fix SDVO turning off randomly drm/nv04/disp: fix framebuffer pin refcounting drm/nouveau/mc: fix race condition between constructor and request_irq() drm/nouveau: fix reclocking on nv40 drm/nouveau/ltcg: fix allocating memory as free drm/nouveau/ltcg: fix ltcg memory initialization after suspend drm/nouveau/fb: fix null derefs in nv49 and nv4e init drm/i915: Invalidate TLBs for the rings after a reset
2013-08-23usb: phy: fix build breakageAnatolij Gustschin2-2/+2
Commit 94ae9843 (usb: phy: rename all phy drivers to phy-$name-usb.c) renamed drivers/usb/phy/otg_fsm.h to drivers/usb/phy/phy-fsm-usb.h but changed drivers/usb/phy/phy-fsm-usb.c to include not existing "phy-otg-fsm.h" instead of new "phy-fsm-usb.h". This breaks building: ... drivers/usb/phy/phy-fsm-usb.c:32:25: fatal error: phy-otg-fsm.h: No such file or directory compilation terminated. make[3]: *** [drivers/usb/phy/phy-fsm-usb.o] Error 1 This commit also missed to modify drivers/usb/phy/phy-fsl-usb.h to include new "phy-fsm-usb.h" instead of "otg_fsm.h" resulting in another build breakage: ... In file included from drivers/usb/phy/phy-fsl-usb.c:46:0: drivers/usb/phy/phy-fsl-usb.h:18:21: fatal error: otg_fsm.h: No such file or directory compilation terminated. make[3]: *** [drivers/usb/phy/phy-fsl-usb.o] Error 1 Fix both issues. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: stable <stable@vger.kernel.org> # 3.10+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23USB: OHCI: add missing PCI PM callbacks to ohci-pci.cAlan Stern1-0/+5
Commit c1117afb8589 (USB: OHCI: make ohci-pci a separate driver) neglected to preserve the entries for the pci_suspend and pci_resume driver callbacks. As a result, OHCI controllers don't work properly during suspend and after hibernation. This patch adds the missing callbacks to the driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Steve Cotton <steve@s.cotton.clara.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23staging: comedi: bug-fix NULL pointer dereference on failed attachIan Abbott1-1/+1
Commit dcd7b8bd63cb81c5b973bf86510ca3c80bbbd162 ("staging: comedi: put module _after_ detach" by myself) reversed a couple of calls in `comedi_device_attach()` when recovering from an error returned by the low-level driver's 'attach' handler. Unfortunately, that introduced a NULL pointer dereference bug as `dev->driver` is NULL after the call to `comedi_device_detach()`. We still have a pointer to the low-level comedi driver structure in the `driv` variable, so use that instead. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds36-175/+282
Merge networking fixes from David Miller: 1) Revert Johannes Berg's genetlink locking fix, because it causes regressions. Johannes and Pravin Shelar are working on fixing things properly. 2) Do not drop ipv6 ICMP messages without a redirected header option, they are legal. From Duan Jiong. 3) Missing error return propagation in probing of via-ircc driver. From Alexey Khoroshilov. 4) Do not clear out broadcast/multicast/unicast/WOL bits in r8169 when initializing, from Peter Wu. 5) realtek phy driver programs wrong interrupt status bit, from Giuseppe CAVALLARO. 6) Fix statistics regression in AF_PACKET code, from Willem de Bruijn. 7) Bridge code uses wrong bitmap length, from Toshiaki Makita. 8) SFC driver uses wrong indexes to look up MAC filters, from Ben Hutchings. 9) Don't pass stack buffers into usb control operations in hso driver, from Daniel Gimpelevich. 10) Multiple ipv6 fragmentation headers in one packet is illegal and such packets should be dropped, from Hannes Frederic Sowa. 11) When TCP sockets are "repaired" as part of checkpoint/restart, the timestamp field of SKBs need to be refreshed otherwise RTOs can be wildly off. From Andrey Vagin. 12) Fix memcpy args (uses 'address of pointer' instead of 'pointer') in hostp driver. From Dan Carpenter. 13) nl80211hdr_put() doesn't return an ERR_PTR, but some code believes it does. From Dan Carpenter. 14) Fix regression in wireless SME disconnects, from Johannes Berg. 15) Don't use a stack buffer for DMA in zd1201 USB wireless driver, from Jussi Kivilinna. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) ipv4: expose IPV4_DEVCONF ipv6: handle Redirect ICMP Message with no Redirected Header option be2net: fix disabling TX in be_close() Revert "genetlink: fix family dump race" hso: Fix stack corruption on some architectures hso: Earlier catch of error condition sfc: Fix lookup of default RX MAC filters when steered using ethtool bridge: Use the correct bit length for bitmap functions in the VLAN code packet: restore packet statistics tp_packets to include drops net: phy: rtl8211: fix interrupt on status link change r8169: remember WOL preferences on driver load via-ircc: don't return zero if via_ircc_open() failed macvtap: Ignore tap features when VNET_HDR is off macvtap: Correctly set tap features when IFF_VNET_HDR is disabled. macvtap: simplify usage of tap_features tcp: set timestamps for restored skb-s bnx2x: set VF DMAE when first function has 0 supported VFs bnx2x: Protect against VFs' ndos when SR-IOV is disabled bnx2x: prevent VF benign attentions bnx2x: Consider DCBX remote error ...
2013-08-23Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds8-14/+12
Merge fixes from Andrew Morton: "A few fixes. One is a licensing change and I don't do licensing, so please eyeball that one" Licensing eye-balled. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: lib/lz4: correct the LZ4 license memcg: get rid of swapaccount leftovers nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error drivers/platform/olpc/olpc-ec.c: initialise earlier
2013-08-23lib/lz4: correct the LZ4 licenseRichard Laager3-7/+7
The LZ4 code is listed as using the "BSD 2-Clause License". Signed-off-by: Richard Laager <rlaager@wiktel.com> Acked-by: Kyungsik Lee <kyungsik.lee@lge.com> Cc: Chanho Min <chanho.min@lge.com> Cc: Richard Yao <ryao@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ The 2-clause BSD can be just converted into GPL, but that's rude and pointless, so don't do it - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-23memcg: get rid of swapaccount leftoversMichal Hocko3-3/+2
The swapaccount kernel parameter without any values has been removed by commit a2c8990aed5a ("memsw: remove noswapaccount kernel parameter") but it seems that we didn't get rid of all the left overs. Make sure that menuconfig help text and kernel-parameters.txt are clear about value for the paramter and remove the stalled comment which is not very much useful on its own. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Gergely Risko <gergely@risko.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-23nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP ↵Vyacheslav Dubeyko1-1/+1
error detection Fix the issue with improper counting number of flying bio requests for BIO_EOPNOTSUPP error detection case. The sb_nbio must be incremented exactly the same number of times as complete() function was called (or will be called) because nilfs_segbuf_wait() will call wail_for_completion() for the number of times set to sb_nbio: do { wait_for_completion(&segbuf->sb_bio_event); } while (--segbuf->sb_nbio > 0); Two functions complete() and wait_for_completion() must be called the same number of times for the same sb_bio_event. Otherwise, wait_for_completion() will hang or leak. Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-23nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP ↵Vyacheslav Dubeyko1-2/+1
error Remove double call of bio_put() in nilfs_end_bio_write() for the case of BIO_EOPNOTSUPP error detection. The issue was found by Dan Carpenter and he suggests first version of the fix too. Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-23drivers/platform/olpc/olpc-ec.c: initialise earlierDaniel Drake1-1/+1
Being a low-level component, various drivers (e.g. olpc-battery) assume that it is ok to communicate with the OLPC Embedded Controller during probe. Therefore the OLPC EC driver must be initialised before other drivers try to use it. This was the case until it was recently moved out of arch/x86 and restructured around commits ac2504151f5a ("Platform: OLPC: turn EC driver into a platform_driver") and 85f90cf6ca56 ("x86: OLPC: switch over to using new EC driver on x86"). Use arch_initcall so that olpc-ec is readied earlier, matching the previous behaviour. Fixes a regression introduced in Linux-3.6 where various drivers such as olpc-battery and olpc-xo1-sci failed to load due to an inability to communicate with the EC. The user-visible effect was a lack of battery monitoring, missing ebook/lid switch input devices, etc. Signed-off-by: Daniel Drake <dsd@laptop.org> Cc: Andres Salomon <dilinger@queued.net> Cc: Paul Fox <pgf@laptop.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-23Merge tag 'drm-intel-fixes-2013-08-23' of ↵Dave Airlie2-0/+14
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Just one patch that soaked for quite a bit to fix a resume issue, resulting in gpu hangs (or worse) due to tlb containing garbage. * tag 'drm-intel-fixes-2013-08-23' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Invalidate TLBs for the rings after a reset
2013-08-22ipv4: expose IPV4_DEVCONFstephen hemminger2-33/+35
IP sends device configuration (see inet_fill_link_af) as an array in the netlink information, but the indices in that array are not exposed to userspace through any current santized header file. It was available back in 2.6.32 (in /usr/include/linux/sysctl.h) but was broken by: commit 02291680ffba92e5b5865bc0c5e7d1f3056b80ec Author: Eric W. Biederman <ebiederm@xmission.com> Date: Sun Feb 14 03:25:51 2010 +0000 net ipv4: Decouple ipv4 interface parameters from binary sysctl numbers Eric was solving the sysctl problem but then the indices were re-exposed by a later addition of devconf support for IPV4 commit 9f0f7272ac9506f4c8c05cc597b7e376b0b9f3e4 Author: Thomas Graf <tgraf@infradead.org> Date: Tue Nov 16 04:32:48 2010 +0000 ipv4: AF_INET link address family Putting them in /usr/include/linux/ip.h seemed the logical match for the DEVCONF_ definitions for IPV6 in /usr/include/linux/ip6.h Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-22ipv6: handle Redirect ICMP Message with no Redirected Header optionDuan Jiong3-1/+26
rfc 4861 says the Redirected Header option is optional, so the kernel should not drop the Redirect Message that has no Redirected Header option. In this patch, the function ip6_redirect_no_header() is introduced to deal with that condition. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
2013-08-22be2net: fix disabling TX in be_close()Sathya Perla1-1/+1
commit fba875591 ("disable TX in be_close()") disabled TX in be_close() to protect be_xmit() from touching freed up queues in the AER recovery flow. But, TX must be disabled *before* cleaning up TX completions in the close() path, not after. This allows be_tx_compl_clean() to free up all TX-req skbs that were notified to the HW. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-22Revert "ACPI / video: Always call acpi_video_init_brightness() on init"Rafael J. Wysocki1-8/+3
Revert commit c04c697 (ACPI / video: Always call acpi_video_init_brightness() on init), because it breaks eDP backlight at 1920x1080 on Acer Aspire S3 for Trevor Bortins. References: https://bugs.freedesktop.org/show_bug.cgi?id=68355 Reported-and-bisected-by: Trevor Bortins <enabfluw@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-22Merge branch 'sfc-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfcDavid S. Miller1-1/+1
Merge in a fix for RX MAC address filter programming bug in the sfc driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-22Revert "genetlink: fix family dump race"Johannes Berg1-7/+0
This reverts commit 58ad436fcf49810aa006016107f494c9ac9013db. It turns out that the change introduced a potential deadlock by causing a locking dependency with netlink's cb_mutex. I can't seem to find a way to resolve this without doing major changes to the locking, so revert this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-22Merge branch 'linux-next' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds2-18/+6
Pull x86 platform driver fixes from Matthew Garrett: "Three trivial fixes - the first reverts a patch that's broken some other devices (again - I'm trying to figure out a clean way to implement this), the other two fix minor issues in the sony-laptop driver" * 'linux-next' of git://cavan.codon.org.uk/platform-drivers-x86: Revert "hp-wmi: Enable hotkeys on some systems" sony-laptop: Fix reporting of gfx_switch_status sony-laptop: return a negative error code in sonypi_compat_init()
2013-08-22Merge tag 'fixes-for-linus' of ↵Linus Torvalds15-18/+27
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A handful of fixes for 3.11 are still trickling in. These are: - A couple of fixes for older OMAP platforms - Another few fixes for at91 (lateish due to European summer vacations) - A late-found problem with USB on Tegra, fix is to keep VBUS regulator on at all times - One fix for Exynos 5440 dealing with CPU detection - One MAINTAINERS update" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: tegra: always enable USB VBUS regulators ARM: davinci: nand: specify ecc strength ARM: OMAP: rx51: change musb mode to OTG ARM: OMAP2: fix musb usage for n8x0 MAINTAINERS: Update email address for Benoit Cousson ARM: at91/DT: fix at91sam9n12ek memory node ARM: at91: add missing uart clocks DT entries ARM: SAMSUNG: fix to support for missing cpu specific map_io ARM: at91/DT: at91sam9x5ek: fix USB host property to enable port C
2013-08-22Merge tag 'devicetree-fixes-for-3.11' of git://sources.calxeda.com/kernel/linuxLinus Torvalds1-0/+2
Pull device tree fix from Rob Herring: "For DT unflattening, add missing memory initialization. This is needed for arches like PPC that use memblock_alloc. This appears to have been an issue for some time, but is a somewhat limited usecase of OF_DYNAMIC" * tag 'devicetree-fixes-for-3.11' of git://sources.calxeda.com/kernel/linux: of: fdt: fix memory initialization for expanded DT
2013-08-22Merge tag 'dm-3.11-fixes' of ↵Linus Torvalds1-9/+7
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fix from Mike Snitzer: "A patch to fix dm-cache-policy-mq's remove_mapping() conflict with sparc32" * tag 'dm-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: avoid conflicting remove_mapping() in mq policy
2013-08-22x86 get_unmapped_area: Access mmap_legacy_base through mm_struct memberRadu Caragea3-3/+6
This is the updated version of df54d6fa5427 ("x86 get_unmapped_area(): use proper mmap base for bottom-up direction") that only randomizes the mmap base address once. Signed-off-by: Radu Caragea <sinaelgl@gmail.com> Reported-and-tested-by: Jeff Shorey <shoreyjeff@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michel Lespinasse <walken@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Adrian Sendroiu <molecula2788@gmail.com> Cc: Greg KH <greg@kroah.com> Cc: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-22Revert "x86 get_unmapped_area(): use proper mmap base for bottom-up direction"Linus Torvalds3-3/+2
This reverts commit df54d6fa54275ce59660453e29d1228c2b45a826. The commit isn't necessarily wrong, but because it recalculates the random mmap_base every time, it seems to confuse user memory allocators that expect contiguous mmap allocations even when the mmap address isn't specified. In particular, the MATLAB Java runtime seems to be unhappy. See https://bugzilla.kernel.org/show_bug.cgi?id=60774 So we'll want to apply the random offset only once, and Radu has a patch for that. Revert this older commit in order to apply the other one. Reported-by: Jeff Shorey <shoreyjeff@gmail.com> Cc: Radu Caragea <sinaelgl@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-22[SCSI] zfcp: remove access control tables interface (keep sysfs files)Martin Peschke1-0/+14
By popular demand, this patch brings back a couple of sysfs attributes removed by commit 663e0890e31cb85f0cca5ac1faaee0d2d52880b5 "[SCSI] zfcp: remove access control tables interface". The content has been irrelevant for years, but the files must be there forever for whatever user space tools that may rely on them. Since these files always return a constant value, a new stripped down show-macro was required. Otherwise build warnings would have been introduced. Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-22[SCSI] zfcp: fix schedule-inside-lock in scsi_device list loopsMartin Peschke1-7/+22
BUG: sleeping function called from invalid context at kernel/workqueue.c:2752 in_atomic(): 1, irqs_disabled(): 1, pid: 360, name: zfcperp0.0.1700 CPU: 1 Not tainted 3.9.3+ #69 Process zfcperp0.0.1700 (pid: 360, task: 0000000075b7e080, ksp: 000000007476bc30) <snip> Call Trace: ([<00000000001165de>] show_trace+0x106/0x154) [<00000000001166a0>] show_stack+0x74/0xf4 [<00000000006ff646>] dump_stack+0xc6/0xd4 [<000000000017f3a0>] __might_sleep+0x128/0x148 [<000000000015ece8>] flush_work+0x54/0x1f8 [<00000000001630de>] __cancel_work_timer+0xc6/0x128 [<00000000005067ac>] scsi_device_dev_release_usercontext+0x164/0x23c [<0000000000161816>] execute_in_process_context+0x96/0xa8 [<00000000004d33d8>] device_release+0x60/0xc0 [<000000000048af48>] kobject_release+0xa8/0x1c4 [<00000000004f4bf2>] __scsi_iterate_devices+0xfa/0x130 [<000003ff801b307a>] zfcp_erp_strategy+0x4da/0x1014 [zfcp] [<000003ff801b3caa>] zfcp_erp_thread+0xf6/0x2b0 [zfcp] [<000000000016b75a>] kthread+0xf2/0xfc [<000000000070c9de>] kernel_thread_starter+0x6/0xc [<000000000070c9d8>] kernel_thread_starter+0x0/0xc Apparently, the ref_count for some scsi_device drops down to zero, triggering device removal through execute_in_process_context(), while the lldd error recovery thread iterates through a scsi device list. Unfortunately, execute_in_process_context() decides to immediately execute that device removal function, instead of scheduling asynchronous execution, since it detects process context and thinks it is safe to do so. But almost all calls to shost_for_each_device() in our lldd are inside spin_lock_irq, even in thread context. Obviously, schedule() inside spin_lock_irq sections is a bad idea. Change the lldd to use the proper iterator function, __shost_for_each_device(), in combination with required locking. Occurences that need to be changed include all calls in zfcp_erp.c, since those might be executed in zfcp error recovery thread context with a lock held. Other occurences of shost_for_each_device() in zfcp_fsf.c do not need to be changed (no process context, no surrounding locking). The problem was introduced in Linux 2.6.37 by commit b62a8d9b45b971a67a0f8413338c230e3117dff5 "[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit". Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Cc: stable@vger.kernel.org #2.6.37+ Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-22[SCSI] zfcp: fix lock imbalance by reworking request queue lockingMartin Peschke2-6/+59
This patch adds wait_event_interruptible_lock_irq_timeout(), which is a straight-forward descendant of wait_event_interruptible_timeout() and wait_event_interruptible_lock_irq(). The zfcp driver used to call wait_event_interruptible_timeout() in combination with some intricate and error-prone locking. Using wait_event_interruptible_lock_irq_timeout() as a replacement nicely cleans up that locking. This rework removes a situation that resulted in a locking imbalance in zfcp_qdio_sbal_get(): BUG: workqueue leaked lock or atomic: events/1/0xffffff00/10 last function: zfcp_fc_wka_port_offline+0x0/0xa0 [zfcp] It was introduced by commit c2af7545aaff3495d9bf9a7608c52f0af86fb194 "[SCSI] zfcp: Do not wait for SBALs on stopped queue", which had a new code path related to ZFCP_STATUS_ADAPTER_QDIOUP that took an early exit without a required lock being held. The problem occured when a special, non-SCSI I/O request was being submitted in process context, when the adapter's queues had been torn down. In this case the bug surfaced when the Fibre Channel port connection for a well-known address was closed during a concurrent adapter shut-down procedure, which is a rare constellation. This patch also fixes these warnings from the sparse tool (make C=1): drivers/s390/scsi/zfcp_qdio.c:224:12: warning: context imbalance in 'zfcp_qdio_sbal_check' - wrong count at exit drivers/s390/scsi/zfcp_qdio.c:244:5: warning: context imbalance in 'zfcp_qdio_sbal_get' - unexpected unlock Last but not least, we get rid of that crappy lock-unlock-lock sequence at the beginning of the critical section. It is okay to call zfcp_erp_adapter_reopen() with req_q_lock held. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Cc: stable@vger.kernel.org #2.6.35+ Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-21ARM: tegra: always enable USB VBUS regulatorsStephen Warren3-0/+8
This fixes a regression exposed during the merge window by commit 9f310de "ARM: tegra: fix VBUS regulator GPIO polarity in DT"; namely that USB VBUS doesn't get turned on, so USB devices are not detected. This affects the internal USB port on TrimSlice (i.e. the USB->SATA bridge, to which the SSD is connected) and the external port(s) on Seaboard/ Springbank and Whistler. The Tegra DT as written in v3.11 allows two paths to enable USB VBUS: 1) Via the legacy DT binding for the USB controller; it can directly acquire a VBUS GPIO and activate it. 2) Via a regulator for VBUS, which is referenced by the new DT binding for the USB controller. Those two methods both use the same GPIO, and hence whichever of the USB controller and regulator gets probed first ends up owning the GPIO. In practice, the USB driver only supports path (1) above, since the patches to support the new USB binding are not present until v3.12:-( In practice, the regulator ends up being probed first and owning the GPIO. Since nothing enables the regulator (the USB driver code is not yet present), the regulator ends up being turned off. This originally caused no problem, because the polarity in the regulator definition was incorrect, so attempting to turn off the regulator actually turned it on, and everything worked:-( However, when testing the new USB driver code in v3.12, I noticed the incorrect polarity and fixed it in commit 9f310de "ARM: tegra: fix VBUS regulator GPIO polarity in DT". In the context of v3.11, this patch then caused the USB VBUS to actually turn off, which broke USB ports with VBUS control. I got this patch included in v3.11-rc1 since it fixed a bug in device tree (incorrect polarity specification), and hence was suitable to be included early in the rc series. I evidently did not test the patch at all, or correctly, in the context of v3.11, and hence did not notice the issue that I have explained above:-( Fix this by making the USB VBUS regulators always enabled. This way, if the regulator owns the GPIO, it will always be turned on, even if there is no USB driver code to request the regulator be turned on. Even ignoring this bug, this is a reasonable way to configure the HW anyway. If this patch is applied to v3.11, it will cause a couple pretty trivial conflicts in tegra20-{trimslice,seaboard}.dts when creating v3.12, since the context right above the added lines changed in patches destined for v3.12. Reported-by: Kyle McMartin <kmcmarti@redhat.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-21hso: Fix stack corruption on some architecturesDaniel Gimpelevich1-1/+5
As Sergei Shtylyov explained in the #mipslinux IRC channel: [Mon 2013-08-19 12:28:21 PM PDT] <headless> guys, are you sure it's not "DMA off stack" case? [Mon 2013-08-19 12:28:35 PM PDT] <headless> it's a known stack corruptor on non-coherent arches [Mon 2013-08-19 12:31:48 PM PDT] <DonkeyHotei> headless: for usb/ehci? [Mon 2013-08-19 12:34:11 PM PDT] <DonkeyHotei> headless: explain [Mon 2013-08-19 12:35:38 PM PDT] <headless> usb_control_msg() (or other such func) should not use buffer on stack. DMA from/to stack is prohibited [Mon 2013-08-19 12:35:58 PM PDT] <headless> and EHCI uses DMA on control xfers (as well as all the others) Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21hso: Earlier catch of error conditionDaniel Gimpelevich1-4/+5
There is no need to get an interface specification if we know it's the wrong one. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21of: fdt: fix memory initialization for expanded DTWladislav Wiebe1-0/+2
Already existing property flags are filled wrong for properties created from initial FDT. This could cause problems if this DYNAMIC device-tree functions are used later, i.e. properties are attached/detached/replaced. Simply dumping flags from the running system show, that some initial static (not allocated via kzmalloc()) nodes are marked as dynamic. I putted some debug extensions to property_proc_show(..) : .. + if (OF_IS_DYNAMIC(pp)) + pr_err("DEBUG: xxx : OF_IS_DYNAMIC\n"); + if (OF_IS_DETACHED(pp)) + pr_err("DEBUG: xxx : OF_IS_DETACHED\n"); when you operate on the nodes (e.g.: ~$ cat /proc/device-tree/*some_node*) you will see that those flags are filled wrong, basically in most cases it will dump a DYNAMIC or DETACHED status, which is in not true. (BTW. this OF_IS_DETACHED is a own define for debug purposes which which just make a test_bit(OF_DETACHED, &x->_flags) If nodes are dynamic kernel is allowed to kfree() them. But it will crash attempting to do so on the nodes from FDT -- they are not allocated via kzmalloc(). Signed-off-by: Wladislav Wiebe <wladislav.kw@gmail.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@nsn.com> Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-08-22gma500: Fix SDVO turning off randomlyGuillaume Clement1-1/+2
Some Poulsbo cards seem to incorrectly report SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED instead of SDVO_CMD_STATUS_PENDING, which causes the display to be turned off. Signed-off-by: Guillaume Clement <gclement@baobob.org> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-22Merge branch 'drm-nouveau-next' of ↵Dave Airlie15-48/+98
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes regression fixes and null derefs and oops fixes. * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nv04/disp: fix framebuffer pin refcounting drm/nouveau/mc: fix race condition between constructor and request_irq() drm/nouveau: fix reclocking on nv40 drm/nouveau/ltcg: fix allocating memory as free drm/nouveau/ltcg: fix ltcg memory initialization after suspend drm/nouveau/fb: fix null derefs in nv49 and nv4e init
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 11:17:05 +0000